114 Educators providing Assistant courses in Loughton

Course Introduction Our Venepuncture and Phlebotomy training equips delegates with the skills and knowledge needed to take blood safely. Please note: this course is for health care professionals and nurses only. About this event Applicable to Nurses, Health Care Assistants and Phlebotomists in primary care, the community, hospitals or nursing homes, this course is interactive and involves a demonstration session on performing blood tests. Our venepuncture training will give delegates the theoretical and practical awareness to undertake a competence assessment framework in the workplace that will deem them competent to take blood safely and appropriately. Each delegate will receive a competence-based framework to allow them to do this. Course Aims Identify and describe equipment used for routine venepuncture Be able to assess and select suitable sites used for venepuncture as well as locations to avoid Describe and utilize the required steps to perform routine venepuncture Describe actions that ensure safety during performance of a venepuncture Identify suitable vein selection and identify factors influencing this Understand relevant professional and legal issues Be able to identify potential complications Understand anatomy and physiology and correct vein selection Be familiar with equipment and exercise choice in using most appropriate equipment Practice safely in terms of infection control and waste management Become skilled and competent at phlebotomy To recognise any complications arising and be able to take the appropriate action Course Content Background and importance of training and competence Supervision and practice Scope and responsibilities Accountability Professional and legal issues Consent and capacity What is phlebotomy? Tools of the trade-equipment Needles and patient safety Blood collection systems and devices Syringes and when to use them Blood collection tubes Labelling Anatomy and physiology Vein Selection: - Identification of Veins - Arm Veins - Hand Veins Vein assessment Unacceptable sites for venous collection Venepuncture procedure Attempts Order of Fill Specimen collection procedures Specimen handling post-phlebotomy Personal protective equipment Needle stick injuries Legislation-EU Directives Disposal Needle phobias Dealing with anxiety/fainting etc. Practical session Potential Complications (including infection control) Practical Application - techniques and troubleshooting Case scenarios Troubleshooting Audit Who should attend / would be applicable? Nurses HCAs Those interested in careers as Phlebotomists AB Health Group awards CPD points / certificate of attendance for each course. If you would prefer an accredited certificate by our accrediting body Aim Qualifications we can organise this. The charge for the certificate including postage is £30.00. Annie Barr AB Health Group Organiser Description Annie Barr is a leading provider of high quality, accredited healthcare training. With a selection of engaging healthcare training that has been developed by experts to equip you and your workforce with the skills, knowledge and competence needed to provide compassionate and high quality care.

Level 3 Supporting Teaching and Learning in Schools Certificate is a RQF qualification & this course play a major role by working with pupils & supporting teachers. This course has been designed to teach the knowledge required to be a teaching assistant and support children’s learning from birth to nineteen years. The course covers various requirements needed to work as an assistant within schools and how to approach a career in the education sector.  ABOUT THIS COURSE: Level 3 Award in Supporting Teaching and Learning is a knowledge only qualification. Experience in the real work environment is not required and the entire course is completed online. Please note that this is a knowledge only Level 3 qualification and does not require any practical assessments. COURSE ASSESSMENT: To pass this course learners must pass 4 assignments. These are completed after navigating through the corresponding lessons and writing your answers to assignment questions. Once these have been read and marked by your personal tutor, feedback and marks are provided to students which contain helpful tips to improve work in future assignments. UNITS COVERED: • Unit 1: Schools and Colleges as Organisations • Unit 2: Support Health and Safety in a Learning Environment • Unit 3: Understand how to Safeguard Children and Young People • Unit 4: Understand How Children and Young People Develop HOW MUCH THIS COURSE COST? Level 3: Award in Supporting Teaching and Learning Course will cost for Distance Learning / Online £249.99 and for class based £349.99. There is no any hidden fess/cost. 

EA/PA Excellence Workshop Live from London on the 25th of April 2024. Featuring Keynote speaker Reggie Love, former Special Assistant to 44th President of the USA, Barrack Obama. Panel featuring Sophie Chapman, assistant to Steven Bartlett entrepreneur, author, host of the diary of a CEO and youngest ever dragon on BBC's Dragon's Den, Victoria Wratten, CEO of the Executive & Personal Assistants Association. The workshop contains, panel talk, keynote talk and facilitation over key topics from Kate Wood over the course of the day.

Learn Traditional Leather Craft, Saddle Stitching And Leather Goods Construction Skills A week-long masterclass offering an in-depth experience of traditional leather craft skills and hand sewing techniques, merging theory with hands-on learning. Dates/times: Five consecutive days - Mon-Fri 10am-5pm Understand the uniqueness of vegetable-tanned leather and the amazing long lasting products that can be created with this material. Proficiently handle traditional hand tools, master various hand-sewing techniques, and understand pattern drafting for the creation of handmade goods. You will gain insights into the technical aspects of leatherworking, including preparation, marking, cutting, gluing, reinforcing, skiving, debossing, finishing, and more. You will create a finished leather bag as well as personalised samples to take home for reference in your future projects.You will conclude the masterclass with the ability to craft entirely handmade leather items and master essential skills such as cutting, finishing, and saddle stitching. You will be taught by a prototype maker and manufacturer with 20 years of experience in this field. Participants also receive valuable handouts and curated lists of leather and tool suppliers for ongoing reference. Leather And Hand Tools: Overview of leather types, tanning, finishing, and best uses Understanding vegetable-tanned leather, how to use it, and how to finish it Importance of choosing the right materials and tools for projects Leather preparation, pattern placement and marking Understanding the cutting of thin and thick leathers and selecting the right cutting tools Using leather punches, skiving, beveling and creasing Finishing leather edges: burnishing and inking Utilising leather glues, tapes and reinforcements Exploration of prototyping and manufacturing leather goods, encompassing varied working methods, machines, and tools. Hand Sewing/saddle Stitching: Saddle stitching leather and understanding related tools and materialsUnderstanding thread types Correctly sewing various leather types, ranging from thin to very thick Sewing straight lines, curves and three-dimensional parts Producing various seams and seam finishes Construction techniques: Sewing and finishing a simple zip on leather Cutting, assembling and sewing simple straps/handles Constructing and sewing common gussets Leather Goods Making: Understanding the basics of pattern making for hand-sewn items and how this differs from machine sewing pattern drafting. Creating a finalised hand sewn leather bag from our designs, choosing colour, materials, reinforcements, hardware and trimmings. By the end of the tuition, you will have: – Developed confidence in utilising specific tools for leather preparation, marking, finishing, cutting and fastening fittings. – Acquired an understanding of working with diverse leather types and thicknesses, with the ability to source and select appropriate tools and materials for your projects. – Mastered essential leather sewing techniques, troubleshooting common sewing issues, and handling challenges such as curves, multiple layers of leather, and three-dimensional objects. – Learned to sew fundamental bag components like simple zips and gussets. – Built confidence in hand sewing, using patterns, and gaining the skills to independently create simple leather items

The NVQ Level 4 Diploma in Construction Site Supervision is appropriate for individuals who work as a Construction Site Supervisor/ Foreman or Assistant Site Manager in the construction sector and are looking to become eligible for the Gold ‘Site Supervisor’ CSCS Card. Our team will discuss the qualification process with you prior to signing up in order to ensure that you will be able to complete the qualification. Every candidate is assigned a competent and experienced assessor who will provide advice and guidance throughout the programme to ensure that candidates are supported in the successful completion of the qualification. CSCS Cards We can provide CSCS tests and CSCS cards alongside your qualification without the need to attend the test centre. Speak to our friendly and helpful team for more information.

The NVQ Level 4 Diploma in Construction Site Supervision – Retrofit is appropriate for individuals who work as a Construction Site Supervisor/ Foreman or Assistant Site Manager in the Retrofit construction sector and are looking to become eligible for the Gold ‘Site Supervisor’ CSCS Card. Our team will discuss the qualification process with you prior to signing up in order to ensure that you will be able to complete the qualification. Every candidate is assigned a competent and experienced assessor who will provide advice and guidance throughout the programme to ensure that candidates are supported in the successful completion of the qualification. CSCS Cards We can provide CSCS tests and CSCS cards alongside your qualification without the need to attend the test centre. Speak to our friendly and helpful team for more information.

Clinical skills, HCAs, Nurses, Chronic disease

Understanding Safe Clinical Practice Professional Development and Competence/Resilience/Mental Health and Wellbeing Interprofessional Communication Reflective Practice Health Promotion and Motivational Interviewing Clinical Skills and Chronic Disease-Asthma COPD/B12/Wound Care/Diabetes/Cardiovsacular/ECG's

Gold CSCS Card NVQ Level 4 Diploma in Construction Site Supervision This qualification is for managers on-site who are working as a site supervisor or assistant site manager. You should be liaising with contractors, supervisors, and construction site management, organising resources, and have responsibility for health and safety and quality control such as inductions, briefings toolbox talks and inspections. You may work across one or more of the following Pathways: Building and Civil Engineering Highways Maintenance Residential Development Conservation Demolition Induction - As soon as you register you will be given a dedicated assessor. They will arrange an induction and together with your assessor you'll get to decide on the pathway which best proves your competency. The induction is used to plan out how you will gather the relevant evidence to complete the course. During the course - The assessor will work with you to build a portfolio of evidence that allows you to showcase your knowledge, skills and experience. The assessor will also regularly review and provide you with feedback. This will allow you to keep on track to progress quickly. You will be assessed through various methods such as observations, written questions, evidence generated from the workplace, professional discussion and witness testimonials. On completion - Once all feedback has been agreed, the Internal Quality Assurer will review your portfolio and in agreement with the assessor your certificate will be claimed. To download our PDF for this course then please click here.

BAG AND ACCESSORY DESIGN COURSE: WHAT IS THIS COURSE ABOUT?This fashion design course for beginners and intermediates is a group class aimed to support aspiring designers or designers in need of guidance in designing viable and realistic bags and/or accessories.This course enables you to understand essential skills required to become a fashion bag designer ans well as guiding you through the steps necessary for designing, developing, prototyping and manufacturing your collection. WHY THIS IS NOT THE USUAL ‘ACCESSORY DESIGN’ COURSEThis course is designed by a team of designers, prototype makers and handbag manufacturers.It is both a theoretical and practical introductory course which will teach you what the industry requires from designers in order to be able to understand and correctly translate their ideas into finished products.This course is focused on giving you an overview on the complexity and extensiveness of the process that designing handbags requires.The course will assist you in understanding the prerequisites before and during the design of your styles. This knowledge will enable you to circumvent a lengthy, costly, and occasionally frustrating process when it comes time to prototype and manufacture your collection. WHY WE CREATED A FASHION DESIGN COURSEAfter years of experience in designing and developing collections for our customers, we realised that there was a substantial lack of clear information available about what designing a collection of handbags and fashion accessories truly requires and how it is achieved.We created this course with the aim of helping the new generation of designers, as well as designers which are still struggling, in developing their ideas and empower them to clearly and correctly communicate them to whoever is going to prototype their collection.We essentially have created this tuition based on the needs and problems of our customers, hoping to promote and facilitate creatives in the realisation of their projects. WHO IS THIS COURSE FOR?This course is designed for aspiring designers and professionals seeking expert advice from the industry. It caters to those in need of guidance to optimise their design process or understand the nuances of working as a fashion accessory designer.No previous experience is required. WHAT WILL BE TAUGHT?The designing classes cover various topics, including:Preliminary considerations before designing on the role and skills of a designerUnderstanding the concept and use of a moodboardAnatomy of a handbag, including lining and hardwearImportance of construction and finishing optionsDifferences and purposes of illustrations vs technical drawingsSketching techniques, including drawing in perspective and technical drawingsProduct development for a specific designUnderstanding what technical information the prototype maker requiresOverview of the prototyping process HOW WILL THE ABOVE BE TAUGHT:The class will take place in person at our London studio and the lesson will alternate between theoretical lessons and practical exercises. INCLUDED IN THE COURSE:You will also receive access to a collection of handouts providing relevant information, useful resources and support in continuing your designing process independently.The handouts will contain:– A glossary containing essential key words related to the topic of the lesson– An illustrated glossary containing information about type of bags and bags’ features– Documents about leather types, finishings, tanning processes– Information about perspective and guides to be used as reference to develop your drawings– A list of recommended suppliers for both leather and fittings (physically in London and online)– A glossary containing information about leather types and characteristicsWHAT ARE THE ENTRY REQUIREMENTS?You should be able to use measurements and understand verbal and written English instructions. ARE THERE ANY OTHER COSTS? IS THERE ANYTHING I NEED TO BRING?Materials to exercise with are included.Feel free to bring a notepad, if you would like to take some notes, we will provide the rest.HOW LONG IS THIS TUITION?:This tuition will require up to 7.5 hours to complete but depending on the number of attendees, the ability of participants and the group’s pace, the syllabus may be covered in a shorter time frame.We aim to provide customised and high-quality tuition services and by only allowing max 6 students at a time, we are able to focus on each person needs and interests.As every student has a different level of ability and previous experience, this course might lead some students to complete the core aspects of the lesson in a shorter time frame than others.Students who complete the course early will be welcome to stay and use the studio facilities to exercise on the topics of the lesson.