242 Art courses in Aldershot

During this day workshop you will be shown the techniques to create your very own bezel set ring. You will learn to set a cabochon stone (stones with a curved top and completely flat base). This is an excellent introduction to stone setting for those who have always wished to learn to set stones. For those with some experience, you can create a more detailed ring which explores textures and more advanced design techniques. WHEN: Saturday 26th October 10-5pm WHERE: Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Kirsten Hendrich WHAT DOES THE DAY INVOLVE? During this day workshop you will be shown the techniques to create your very own bezel set ring. You will learn to set a cabochon stone (stones with a curved top and completely flat base). This is an excellent introduction to stone setting for those who have always wished to learn to set stones. For those with some experience, you can create a more detailed ring which explores textures and more advanced design techniques. We will have some stones available to choose at the workshop, however feel free to bring along any stones you may wish to set. Time and materials allow you to create one ring. Some stones might not be suitable due to size or shape, so please be aware if you do bring along your own stones, it might not be suitable for the setting technique but we will advise you on the day. Stones shouldn’t be smaller than 8-10mm for those new to setting as they can be hard to work with and is it harder to see the processes involved in setting. EXPERIENCE REQUIRED: None, all abilities are welcomed. We support you throughout the session and provide demonstrations to show you the techniques and steps needed to create your project. CLASS SIZE: 7 WHAT IS INCLUDED? All tools and consumables are supplied YOU WILL BE PROVIDED WITH: 2xm x 2cm 0.5mm silver sheet 15cm bezel strip 5mm high one stone 10cm 2mm silver round wire WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Also pack your own lunch, snacks and drinks for the session. We regret we can’t offer tea and coffee at the moment due to Coronavirus so make sure you bring enough refreshments and supplies to keep you going during the day. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

We invite adults, children, complete beginners, and advanced pianists alike to join us at our studio on Baker Street for the finest and most comprehensive piano lessons London has to offer, thanks to a wonderful team of piano instructors. Please contact us for in-person or online lesson availability.

In this one-day introduction to grain setting techniques, you will learn how to set small stones in a selection of styles. We will begin with a simple single stone grain setting before moving onto a traditional star setting and finally a row of five stones in a thread and grain style setting. During the day we will also look at considerations for grain setting as well as the preparation of tools and possible applications. WHEN: Saturday 14th September 10-5pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Stephen Barnett WHAT DOES THE DAY INVOLVE? In this one-day introduction to grain setting techniques, you will learn how to set small stones in a selection of styles. We will begin with a simple single stone grain setting before moving on to a traditional star setting and finally a row of five stones in a thread and gain style setting. During the day, we will also look at considerations for grain setting as well as the preparation of tools and possible applications. As always with advance stone setting, we strongly recommend you set aside some time after your course to practice the skills you learn to develop your technique. We will be in touch the week of your course with full details and directions and any other helpful information we think will be of use for the day. EXPERIENCE REQUIRED: Students should have some stone setting experience and be confident using normal jewellery tools and equipment. If you are unsure, please email us at hello@workshop925.com to discuss any queries, we are always here to help. CLASS SIZE: 7 WHAT IS INCLUDED? All tools and consumables are supplied including your stones and silver. WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Please bring any lunch, snacks and drinks which you may want to your session. We have tea and coffee for you to help yourselves to. For stone setting courses, it is also recommended to bring Optivisors if you have any or glasses which allow you to see smaller stones. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

This one-day workshop will give you a solid overview of many of the key topics relating to gems and gemmology, covering scientific aspects of the subject, the journey of a gemstone and the practical side of gem properties and identification. You will learn to use some of the main gemmologist’s tools and have a chance to examine a wide range of gemstones. A gemstone reference book RRP £10 will be included in the price WHEN: Sunday 29th September 10 – 4.30pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Stuart Pool from Nineteen 48 WHAT DOES THE DAY INVOLVE? This one-day workshop will give you a solid overview of many of the key topics relating to gems and gemmology, covering scientific aspects of the subject, the journey of a gemstone and the practical side of gem properties and identification. You will learn to use some of the main gemmologist’s tools and have a chance to examine a wide range of gemstones. The main areas covered are: – General Introduction – The World of Gemstones – Properties & Identification – Grading & Buying This course is suitable for complete beginners to the subject and will also interest those with some previous knowledge, such as jewellery makers who want to learn more about the materials they use. Students need only bring their energy and enthusiasm, plus something for making notes. Everything else will be provided. The main areas covered are: How gemmology covers different scientific disciplines Gem basics Definition of a gemstone Inorganic / organic material Gemstone formation Physical and optical properties (overview) Responsible sourcing Environmental concerns Traceability Disclosure Diamond producers Diamond mining Sources of coloured gemstones Coloured stone mining Mining in Sri Lanka – history, process, structure, tradition, etc. Gem identification Gemstone properties – rough and faceted Inclusions – various examples of typical inclusions Tools & instruments – descriptions and usage Practical tasks for gem identification Gem grading and valuation – The factors that affect price – Diamonds – Coloured gemstones – Buying tips A gemstone reference book RRP £10 will be included in the price WHAT TO BRING: Bring along a note book. We will provide light refreshments, however you might want to bring some lunch. We have a fridge, microwave and kettle in the workshop. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

This class is about getting to grips with Tube Setting. You will have to option to create a pendant or ring – maybe even two pieces if time allows. Krista will guide you through the process of tube setting where you will be using the Foredom Pendant Motor to cut a seat for your facetted brilliant cut stone. From here you can design and make your pendant or ring, solder your setting in place and then learn the techniques to set your stone. WHEN: Sunday 15th September 10-5pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Krista Thomson WHAT DOES THE DAY INVOLVE? This class is about getting to grips with Tube Setting. You will have to option to create a pendant or ring – maybe even two pieces if time allows. Krista will guide you through the process of tube setting where you will be using the Foredom Pendant Motor to cut a seat for your facetted brilliant cut stone. From here you can design and make your pendant or ring, solder your setting in place and then learn the techniques to set your stone. Krista will guide you through each stage and there is time to practice settings so your can really understand the process correctly. We will be working with 4mm round facetted brilliant cut stones. If you would like to bring along your own stones, that is not a problem, Krista can advise if they are suitable on the day. We will work with Cubic zirconias as they are affordable, strong and perfect while you practice. Each student has their own fully equipped bench with its own Foredom Pendant Motor. We have put together a Pinterest Board to show how tube setting can be used within jewellery making. EXPERIENCE REQUIRED: It will help to have some experience with basic making skills. CLASS SIZE: 6 WHAT IS INCLUDED? All tools and consumables are supplied YOU WILL BE PROVIDED WITH: 0.8mm silver sheet – 0.5cm wide x 9cm length – for a band ring or pendant design. 2mm silver round wire – 15cm Length – for a pendant or 2 rings 4.5mm silver tube – 7cm 4mm Cubic Zirconias x 3 WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Also pack your own lunch, snacks and drinks for the session. We regret we can’t offer tea and coffee at the moment due to Coronavirus so make sure you bring enough refreshments and supplies to keep you going during the day. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

Unlike other weekend classes which involve completing a specific project, this class hands the control over to you. You are able to design and make a project of your choice, that may be a project with the aim to practice a certain skill, or maybe you are looking to make a special present, or create something you have always wanted to own, this class provides you with the tutor support, professional tools and a friendly, welcoming environment to make your own designs. This is for current term time or summer term time students only. WHEN: Saturday 3rd August 10-5pm 2024 TUTOR: Sarah Reece WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Sarah Reece WHAT DOES THE DAY INVOLVE? Unlike other weekend classes which involve completing a specific project, this class hands the control over to you. You are able to design and make a project of your choice, that may be a project with the aim to practice a certain skill, or maybe you are looking to make a special present, or create something you have always wanted to own, this class provides you with the tutor support, professional tools and a friendly, welcoming environment to make your own designs. This is for current term time or summer term time students only. Our workshop is equipped with everything a jeweller could wish for. You will have your very own solid jewellers workbench to work on to complete your projects and your own tool kit meaning you won’t have to wait for tools. Your bench is also equipped with its own pendant motor. In the workshop you will also find soldering equipment on each bench, a wide range of professional stone setting tools for various stone setting styles, a wide range of hand tools, texturing tools, a rolling mill, a hydraulic press, polishing equipment, dapping tools and punches, all of which will allow you the chance to create your designs within a professional setting. EXPERIENCE REQUIRED: You must be enrolled on our term time class or summer term or have experience. CLASS SIZE: 7 WHAT IS INCLUDED? All tools and consumables are supplied Please bring refreshments The cost of this course does not include materials. WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Please bring any PPE, snacks and drinks to each session. We regret we can’t offer tea and coffee at the moment due to Coronavirus. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange.

This one day silver bangle making course lead by jeweller Kirsten Hendrich will introduce you skills and techniques required to design and make your own silver sterling bangles. You will learn how to size bangles, how to solder, texture the metal, cut out a charm, and also polish your designs. You will be provided with all the silver required to make two stacking bangles and a charm to accompany them. This is an excellent starting project for a beginner. For those with more experience, it is an opportunity to develop your skills further. WHEN: Sunday 8th December 10-5pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Amy Hubbard WHAT DOES THE DAY INVOLVE? This one day silver bangle making course will introduce you to the skills and techniques required to design and make your own silver sterling bangles. You will learn how to size bangles, how to solder, texture the metal, cut out a charm, and also polish your designs. You will be provided with all the silver required to make two stacking bangles and a charm to accompany them. This is an excellent starting project for a beginner. For those with more experience, it is an opportunity to develop your skills further. EXPERIENCE REQUIRED: None, all abilities are welcomed. Our small classes mean we are able to provide each student with the support they require. CLASS SIZE: 7 WHAT IS INCLUDED? – All tools and consumables are supplied – Light refreshments are provided The cost of this course includes materials. You will be given: Two lengths 21cm of 2 mm silver sterling round wire 10 cm of 1.2mm silver round wire 3 cm x 3 cm 0.8mm silver sheet We stock some silver, so should you wish to make additional bangles or thicker bangles, you can purchase additional silver on the day for your designs. WHAT TO BRING: For safety reasons, at each session closed in shoes must be worn and long hair tied back, we also suggest wearing old clothes. We will provide light refreshments however you might want to bring some lunch. We have a fridge, microwave and kettle in the workshop. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

Create your very own silver chain bracelet during this day workshop. We will guide you through all the processes involved in creating your own design. From cutting, shaping and texturing the silver, through to soldering and polishing. You will create each link and a T bar clasp. This is a fantastic project to help you learn or improve your soldering skills, and a great introduction to jewellery making. WHEN: Saturday 16th November 10-5pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Kirsten Hendrich WHAT DOES THE DAY INVOLVE? Create your very own silver chain bracelet during this day workshop. We will guide you through all the processes involved in creating your own design. From cutting, shaping and texturing the silver, through to soldering and polishing. You will create each link and a T bar clasp. This is a fantastic project to help you learn or improve your soldering skills. If you are looking for some inspiration, we have created a Pinterest board to help inspire some ideas. You will be provided with 1.2mm thick wire for your links. We work really hard to make sure our students love what they create, so if you have a chunkier design idea in mind, please get in touch as the material costs increase and it can be more difficult to create thicker links, so we just need to check it is achievable within the time frame. EXPERIENCE REQUIRED: None, all abilities are welcomed. We support you throughout the session and provide demonstrations to show you the techniques and steps needed to create your own chain bracelet from start to finish. Our small classes mean we are able to provide each student with the support they require. Students must be 16+ Students aged 14 or 15 are able to attend if accompanied by an adult. CLASS SIZE: 7 WHAT IS INCLUDED? All tools and consumables are supplied. The cost of this course includes materials. YOU WILL BE PROVIDED WITH: 10cm of 2mm round wire to create your clasp 1.5 metres of 1.2mm silver round wire for your bracelet links If you wish to purchase additional silver to create alternative link thicknesses (should time allow), we stock silver which you are able to purchase on the day but please run your ideas through with us first by emailing hello@workshop925.com WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Please bring any PPE, snacks and drinks to each session. We have a microwave, kettle and fridge to store or cook your lunch choices. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

About this training course Business Impact: The main aim is to provide insight and understanding of data analytics and machine learning principles through applications. Field data is used to explain data-analysis workflows. Using easy to follow solution scripts, the participants will assess and extract value from the data sets. Hands-on solution approach will give them confidence to try out applicable techniques on data from their field assets. Data analysis means cleaning, inspecting, transforming, and modeling data with the goal of discovering new, useful information and supporting decision-making. In this hands-on 2-day training course, the participants learn some data analysis and data science techniques and workflows applied to petroleum production (specifically artificial lift) while reviewing code and practicing. The focus is on developing data-driven models while keeping our feet closer to the underlying oil and gas production principles. Unique Features: Eight business use cases covering their business impact, code walkthroughs for most all and solution approach. Industry data sets for participants to practice on and take home. No software or complicated Python frameworks required. Training Objectives After the completion of this training course, participants will be able to: Understand digital oil field transformation and its impact on business Examine machine learning methods Review workflows and code implementations After completing the course, participants will have a set of tools and some pathways to model and analyze their data in the cloud, find trends, and develop data-driven models Target Audience This training course is suitable and will greatly benefit the following specific groups: Artificial lift, production and facilities engineers and students to enhance their knowledge base, increase technology awareness, and improve the facility with different data analysis techniques applied on large data sets Course Level Intermediate Advanced Training Methods The course discusses several business use-cases that are amenable to data-driven workflows. For each use case, the instructor will show the solution using a data analysis technique with Python code deployed in the Google cloud. Trainees will solve a problem and tweak their solution. Course Duration: 2 days in total (14 hours). Training Schedule 0830 - Registration 0900 - Start of training 1030 - Morning Break 1045 - Training recommences 1230 - Lunch Break 1330 - Training recommences 1515 - Evening break 1530 - Training recommences 1700 - End of Training The maximum number of participants allowed for this training course is 20. This course is also available through our Virtual Instructor Led Training (VILT) format. Prerequisites: Understanding of petroleum production concepts Knowledge of Python is not a must but preferred to get the full benefit. The training will use the Google Collaboratory environment available in Google-Cloud for hands-on exercises Trainees will need to bring a computer with a Google Chrome browser and a Google email account (available for free) Trainer Your expert course leader has over 35 years' work-experience in multiphase flow, artificial lift, real-time production optimization and software development/management. His current work is focused on a variety of use cases like failure prediction, virtual flow rate determination, wellhead integrity surveillance, corrosion, equipment maintenance, DTS/DAS interpretation. He has worked for national oil companies, majors, independents, and service providers globally. He has multiple patents and has delivered a multitude of industry presentations. Twice selected as an SPE distinguished lecturer, he also volunteers on SPE committees. He holds a Bachelor's and Master's in chemical engineering from the Gujarat University and IIT-Kanpur, India; and a Ph.D. in Petroleum Engineering from the University of Tulsa, USA. Highlighted Work Experience: At Weatherford, consulted with clients as well as directed teams on digital oilfield solutions including LOWIS - a solution that was underneath the production operations of Chevron and Occidental Petroleum across the globe. Worked with and consulted on equipment's like field controllers, VSDs, downhole permanent gauges, multiphase flow meters, fibre optics-based measurements. Shepherded an enterprise-class solution that is being deployed at a major oil and gas producer for production management including artificial lift optimization using real time data and deep-learning data analytics. Developed a workshop on digital oilfield approaches for production engineers. Patents: Principal inventor: 'Smarter Slug Flow Conditioning and Control' Co-inventor: 'Technique for Production Enhancement with Downhole Monitoring of Artificially Lifted Wells' Co-inventor: 'Wellbore real-time monitoring and analysis of fracture contribution' Worldwide Experience in Training / Seminar / Workshop Deliveries: Besides delivering several SPE webinars, ALRDC and SPE trainings globally, he has taught artificial lift at Texas Tech, Missouri S&T, Louisiana State, U of Southern California, and U of Houston. He has conducted seminars, bespoke trainings / workshops globally for practicing professionals: Companies: Basra Oil Company, ConocoPhillips, Chevron, EcoPetrol, Equinor, KOC, ONGC, LukOil, PDO, PDVSA, PEMEX, Petronas, Repsol, , Saudi Aramco, Shell, Sonatrech, QP, Tatneft, YPF, and others. Countries: USA, Algeria, Argentina, Bahrain, Brazil, Canada, China, Croatia, Congo, Ghana, India, Indonesia, Iraq, Kazakhstan, Kenya, Kuwait, Libya, Malaysia, Oman, Mexico, Norway, Qatar, Romania, Russia, Serbia, Saudi Arabia, S Korea, Tanzania, Thailand, Tunisia, Turkmenistan, UAE, Ukraine, Uzbekistan, Venezuela. Virtual training provided for PetroEdge, ALRDC, School of Mines, Repsol, UEP-Pakistan, and others since pandemic. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

This one-day workshop is a hands-on introduction to photographing jewellery, aimed at jewellers who are considering or just beginning to sell their work. We’ll look at the why and the how of creating a consistent and considered style for presenting your work either online or for marketing materials. We’ll cover the basic kit you’ll need; the best camera settings to use; different lighting styles and how to achieve them; and composition and styling using a range of backgrounds and props to bring your images to life. No previous photography experience is needed. You’re welcome to use a phone camera or SLR/mirrorless camera, as you prefer, and to bring with you any other photography kit or props you may have, although this is not necessary. Cathy Pyle is an experienced professional photographer and teacher of adults, who works with creatives, small businesses and magazines across the UK. WHEN: Saturday 10th August 10-3.30pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Cathy Pyle WHAT DOES THE DAY INVOLVE? This one-day workshop is a hands-on introduction to photographing jewellery, aimed at jewellers who are considering or just beginning to sell their work. We’ll look at the why and the how of creating a consistent and considered style for presenting your work either online or for marketing materials. We’ll cover the basic kit you’ll need; the best camera settings to use; different lighting styles and how to achieve them; and composition and styling using a range of backgrounds and props to bring your images to life. No previous photography experience is needed. You’re welcome to use a phone camera or SLR/mirrorless camera, as you prefer, and to bring with you any other photography kit or props you may have, although this is not necessary. Cathy Pyle is an experienced professional photographer and teacher of adults, who works with creatives, small businesses and magazines across the UK. EXPERIENCE REQUIRED: No experience is required to attend this course. CLASS SIZE: 6 WHAT IS INCLUDED? WHAT SHOULD I BRING? Bring along your smart phone and any props of camera equipment you would like to use or need some advice using. We will have backgrounds and some props you are welcome to use. You will be moving around the workshop, within the corridor area and outside to explore different environments to photograph your work. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.