1712 AR courses in Nottingham

About this Course This 5 full-day course provides a comprehensive understanding of all the commissioning procedures for combined cycle power plants. The Commissioning Management System (CMS) of combined cycle power plants is covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report. The course provides also a thorough understanding of all the commissioning requirements for gas turbines, steam turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear and transformers. All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a combined cycle power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of combined cycle power plant systems, safety rules clearance certificates, procedure for the control and handling of defects, commissioning reports, operational testing, first fire, generator synchronization, performance testing, heat rate testing, emission testing, contract testing, CO2 concentration tests, electrical full-load rejection test, duct burner testing, partial load stability test, and reliability test. This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any combined cycle power plant equipment because it provides detailed pre-commissioning checks and tests, and detailed tests and commissioning procedures and instructions for every component in a combined cycle power plant. In addition, the seminar provides an in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each combined cycle power plant equipment, safety and precautions, safety rules clearance certificates, procedures for handling defects, and commissioning reports. Training Objectives Pre-commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in Combined Cycle Power Plants: Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in combined cycle power plants Commissioning Management System (CMS) of Combined Cycle Power Plants: Discover the benefits of the CMS of combined cycle power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report Commissioning Procedures and Instructions for Heat Recovery Steam Generators, Air Blow and Steam Blow of Steam and Gas Piping in Combined Cycle Power Plants: Learn about the commissioning procedures and instructions for heat recovery steam generators, chemical cleaning of heat recovery steam generators, air blow and gas blow of steam and gas piping in combined cycle power plants, safety valve setting and soot blowers Commissioning Procedures and Instructions for Gas Turbines and Steam Turbines: Gain a thorough understanding of all the commissioning procedures and instructions for gas and steam turbines and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging Commissioning Procedures and Instructions for Generator and Auxiliaries: Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and start-up of generators Commissioning Procedures and Instructions for Electrical Equipment: Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers and motors Operational Testing, Performance Testing, Heat Rate Testing, Emission Testing of Combine Cycle Power Plants: Gain a thorough understanding of operational testing, first fire, generator synchronization, performance testing, heat rate testing, emission testing, contract testing, CO2 concentration tests, electrical full-load rejection test, duct burner testing, partial load stability test, and reliability test of combined cycle power plants Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals Training Methods The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Our Forensic Accounting Course is designed to help investment analysts detect earnings manipulation. It focuses on creative accounting rather than conducting detailed forensic analysis but we explain the tools short sellers employ to detect fraud and some of the techniques we used at hedge funds to identify short opportunities.

I hold sound journey & gong bath sessions every week in both Bournemouth and Southbourne (on the South coast, Dorset, uk).   Everyone is welcome at these events which take place on Friday evenings and Sunday evenings from 7.30 pm – 9 pm. Advance booking is required as these are very popular and are almost always fully booked.   You can find out more about these and book your space to join us here

As a qualified Reiki master, I can come to your home and provide a 1hr Reiki healing session.   We can work on any areas you may be aware of that require some attention. Or I can do a full body scan and assessment, free up an unbalanced energy flow within the body and bring everything back into alignment. These sessions are a fantastic way to relieve stress and promote healing. For more information or booking enquiries, please contact me here.

As a qualified crystal healer, I can come to your home and provide a 1hr crystal healing session.   We can work on any areas you may be aware of that require some attention. Or I can do a full body scan and assessment, free up an unbalanced energy flow within the body and bring everything back into alignment.   I can also free the body from any negative energies and restore positive balance and harmony within. These sessions are a fantastic way to relieve stress and promote healing. For more information or booking enquiries, please contact me here.

I offer private sound healing and sound therapy sessions on either a 1:1 or 2:1 (couples/friends) basis. I come to you and provide this service within the comfort of your own home. These sessions can be completely tailored toward your individual needs. Popular subjects I am often asked to concentrate on are stress relief, anxiety, grief, sleep issues, physical or emotional pain and/or discomfort, letting go of burdens that you no longer wish to carry, setting new intentions, re-energizing and recharging or just an ultimate relaxation sound journey session that will leave you feeling beautifully peaceful, calm and relaxed. My sessions include the use of sound and vibration, guided meditation, and aromatherapy.   I also offer chakra rebalancing sessions to restore the natural flow of energy within us using Tibetan body work bowls, gong, powerful crystals, and guided meditation.   For more information on these popular 1:1 or 2:1 sessions please get in touch.

What is perinatal mental health and fathers?  The term ‘perinatal’ refers to the period of time around childbirth. Interpretations of the timeframe of this period vary; in some cases, it includes the time before conception until two years after an infant has been born. In the UK, the First 1001 Days Movement raises awareness of the developmental significance of the first two and a half years of a child’s life. In the course we explain: High risk of suicide in new fathers. The impact on the partner and the development of the child. PTSD, Perinatal Anxiety and Depression in fathers.  Signs, Symptoms and how to engage with fathers.  Importance of bonding and attachment with father - baby. Biological risk factors 

Level 2 Food Safety and Hygiene in Catering Course

Changing patterns of thinking can be challenging, I work with individuals and small groups to discover techniques that are proven methods of change, such lateral thinking techniques, Appreciative Inquiry and other methodologies to change stuck patterns.

I offer private immersive sound journey & gong bath sessions for groups of up to 19 people. These can be completely tailored to your specific requirements.   We can work with a theme of your choice, or I am happy to make helpful suggestions. Popular themes tend to be complete relaxation sessions, stress relief, recharge & re-energizing, and events around the time of a new moon (perfect for setting new intentions) or a full moon (a great opportunity to let go of things that no longer serve us). I have two beautiful venues that I regularly use in Bournemouth and in Southbourne. I often use these for private group sessions and provide everything that is needed for you and your friends to enjoy a magical sound and vibration journey like no other. For all enquiries, please contact me.