Cademy logoCademy Marketplace
  • Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

2 Educators providing Courses

subordinate
Veitch Aviation Training Services

veitch aviation training services

London

Keeping in view the dire need of true aviation professionals for aviation industry particularly in Pakistan, the Institute of Aviation Studies (IAS) was established in University of Management and Technology (UMT) during Spring-2011 and initially offered 4-year BS Aviation Management (AM) program which gave a new dimension to the aviation education to produced specialized human resource. IAS kept on offering the most fascinating career of students who desire the aviation as a spirit of their dream to learn & teach the adventurous way to sky. It was the beginning of a vision that has produced so far more than 150 alumni who drove innovations in different slots of aviation industry, productively. 2013 was the year when a flight simulator, with a mock-up of aircraft Cessna-172, and Air Traffic Control (ATC) as the training devices were made and set in UMT premises for students of aviation as a part of their BSAM program. These training devices are also utilized for ICAO English Language Proficiency Test (ELPT) for pilots of all categories Similarly, a huge demand of qualified & licensed professionals in the field of Aircraft Maintenance in Pakistan and particularly in this region pushed us to launch 4-year BS Aircraft Maintenance Engineer`s Technology (AMET) program in 2014 along with the license course of Part-66 (B1.2 & B3) under an EASA-approved,Part-147, Maintenance Training Organization (MTO) named as AERO-Bildung, GmbH, Germany with hands-on experience on operational aircrafts at an airport in Pakistan. In same year i.e. February, 2014, high officials of Pakistan Civil Aviation Authority (PCAA) visited UMT and after assuring ICAO & PCAA required standards, authorized IAS with three certifications as under: Authorization of ground courses for Private Pilot License/Commercial Pilot License/Instrument Rating/Airlines Transport Pilot License.(PPL/CPL/IR/ATPL) Authorization of ground course for Flight Operation Officer/Flight Despatcher. (FOO/FD) IAS,UMT as an English Language Proficiency Test (ELPT) Center for all categories of pilots in Pakistan The University of Management and Technology is the only university in Pakistan which has been authorized Institute of Aviation Studies to impart training &ground courses for aviation students of UMT and pilots (PPL/CPL/IR/ATPL) and to act as an examination center for pilots in Pakistan. In the year of 2014, only in UMT, BSAM degree program was value-added by introducing PCAA-approved “Flight Operation Officer/Flight Despatcher” (FOO/FD) Course for every BSAM student of IAS free of cost, enabling them to directly appear before PCAA examination for FOO/FD license. In 2014, Institute of Aviation Studies, UMT became the member of USA-based “University Aviation Association” (An international association of the world`s universities having aviation department in their set-up). In 2015,IAS,UMT held a collaboration simultaneously with four flying clubs in Pakistan for the purpose of hands-on experience on operational aircrafts for the students of BS AMET program as a part of their AMET license of Part-66 (B1.2 & B3). Kept on flying higher & higher, in 2016, IAS of this university launched a 2-year “MSc. Air Transport Management” program with the collaboration of Turkish Aviation Academy,(an IATA approved aviation training academy & subordinate organization of Turkish Airlines) at Istanbul, Turkey. In a bid to further expand education in aviation field, UMT stepped-out of university premises in 2017 and established a sub-campus of IAS at Walton Airport. Lahore under the title of “Walton Aviation Training School” for hands-on experience, trainings & courses for aviation students and all category of pilots in Pakistan. In 2017, an FAA, EASA&PCAA-approved flight simulator, with motion, brought from USA and installed at Walton Aviation Training School, Walton Airport, Lahore first time in Pakistan to provide upto 30hrs log able flying training for pilots i.e. PPL/CPL/IR/ATPL. In 2018, IAS-UMT is the only university in Pakistan, which is approved by INTERNATIONAL AIR TRANSPORT ASSOCIATION (IATA), to join its global training partner network as an IATA AUTHORIZED TRAINING CENTER (ATC) and allocated IATA ATC 3-letter code as "UMT"

Message
Moderntronics

moderntronics

Harrow,

In these terms and conditions (“Conditions”) the following expressions shall have the following meanings: “Business Day” means any day other than Saturday, Sunday or a public holiday. “Business Hours” means the hours detailed in Condition 32 below. “Contact Hours” means Monday to Friday (inclusive) from 07:00 hours to 17:00 hours but excluding bank holidays. “Contract” means any contract between MT and the Customer for the supply of Hardware and/or Software (with the associated Licence) and/or services which is subject to these Conditions. “Customer” means any person, firm or company who enters into a Contract with MT to which these Conditions apply. “Force Majeure” means any event outside the reasonable control of either Party affecting its ability to perform any of its obligations (other than as to payment) under these Conditions. “Goods” means all or any tangible or intangible goods or intellectual property including but not limited to Hardware and Software which are provided to a Customer in accordance with these Conditions. “Hardware” means any hardware provided by MT to the Customer. “MT” means MODERNTRONICS Ltd. or its servants and agents as the case may be. “Insolvency Event” means any one of the following in relation to the Customer: (i) a notice being issued to propose a resolution for winding up or dissolution, or such a resolution being passed; (ii) a petition for a winding up or an administration or bankruptcy order being presented, or such an order made; (iii)any steps being taken with a view to a voluntary arrangement or other assignment, composition or arrangement with all or any creditors or any moratorium, readjustment, rescheduling, forgiveness or deferral of all or any indebtedness; (iv) suspension of payments to all or any creditors and/or ceasing business; (v)an encumbrancer taking possession of all or any assets; (vi) an administrator or receiver being appointed over the Customer or all or any of its assets; (vii)any action anywhere similar or analogous to any of the foregoing; or MT reasonably believing that any of the foregoing is imminent. “Licence” has the meaning attributed to it in Condition 23 below. “Minimum Term” means the term set out in Condition 17 below. “Party” means MT or the Customer and “Parties” means both of them. “Response Time” means two Working Hours from an initial call to the hotline under Condition 26 or 28 below. “Seminar” means any seminar provided by MT. “Service Operator” has the meaning given to that term in Condition 28 below. “Site” means https://www.moderntronics.com and all subdomains including (but without limitation) “Software” means software or software updates or upgrades provided by MT and licensed to the Customer under Condition 23 below. “Training Sessions” means any training session provided by MT. “Working Hours” means the hours between 9:00 to 17:00 on any Business Day 2. Interpretation In these Conditions, the following rules apply: A person includes a natural person, corporate or unincorporated body (whether or not having separate legal personality). A reference to a Party includes its personal representatives, successors or permitted assigns. A reference to a statute or statutory provision is a reference to such statute or provision as amended or re-enacted. A reference to a statute or statutory provision includes any subordinate legislation made under that statute or statutory provision, as amended or re-enacted. Any phrase introduced by the terms including, include, in particular or any similar expression shall be construed as illustrative and shall not limit the sense of the words preceding those terms. A reference to writing or written includes faxes and e-mails. 3. General Information These Conditions apply when MT: sells and delivers Hardware; sells and delivers Licences; sells and delivers Software; or provides repairs or any other services to the Customer. They will also apply to other business transactions unless MT agrees that alternative special conditions apply. These Conditions apply to the exclusion of any other conditions that may be proposed by a Customer or implied by law (insofar as such exclusion is lawful). Part II Specific Provisions for the Use of the Online Shop Customers purchasing Goods from the Site, must read all Parts of these Conditions, which apply to them in full. 4. Consumers The Goods and services provided by MT are designed only for sale to and use by businesses in the course of their business activities. MT does not knowingly sell to any person dealing as a consumer or supply anything for personal use. 5. Customer’s Status By placing an order on the Site, the Customer warrants that he or she is: legally capable of entering into binding contracts and, where the Customer is an individual, that he or she is at least 18 years old; and is dealing in a business capacity and purchasing Goods and/or services for the purpose of his business and not for personal use. Part III General Conditions for the Provision of Goods and Services 6. Formation of Contract Quotations provided by MT to the Customer are not binding on MT. The Customer’s order constitutes an offer to MT to buy the Goods or services. All orders are subject to acceptance by MT. The offer will be deemed accepted, and a Contract formed, when MT sends the Customer confirmation that the Goods have been dispatched (“Dispatch Confirmation”) or, in the absence of a Dispatch Confirmation, when the Goods are delivered. The Contract will only relate to those Goods whose dispatch is confirmed to the Customer by a Dispatch Confirmation or if no Dispatch Confirmation is sent, those Goods which are actually dispatched. MT is not obliged to supply any Goods which may have been part of the Customer’s order until the dispatch of such Goods has been confirmed in a separate Dispatch Confirmation. Subject to Condition 17 below, an order for services will be deemed to have been accepted, and a Contract formed, when MT sends the Customer confirmation that the services ordered will be provided (“Service Confirmation”) or, in the absence of a Service Confirmation, when the services begin to be provided. Oral representations will only be binding upon MT if they are expressly confirmed in writing by MT to the Customer. 7. Price Unless MT expressly specifies prices to the Customer, MT’s current list of prices applicable at the time of the acknowledgement of order will apply. Unless otherwise agreed in writing, all prices are exclusive of value added tax, postage, freight, insurance, forwarding fees, installation and commissioning, travelling expenses and subsistence, which will be added as appropriate. MT will charge overtime for work outside of their normal Business Hours at up to 150% of the hourly rate from time to time applicable during Business Hours. Subject to Condition 16 below, prices are liable to change at any time, but changes will not affect orders in respect of which MT has already sent the Customer a Dispatch Confirmation or a Service Confirmation as the case may be. The Site contains a large number of products and it is always possible that, despite MT’s efforts, some of the products listed may be incorrectly priced. MT will normally verify prices as part of dispatch procedures so that, where a product’s correct price is less than our stated price, MT will charge the lower amount when dispatching the product to you. If a product’s correct price is higher than the price stated on our site, MT will normally, at our discretion, either contact you for instructions before dispatching the product, or reject your order and notify you of such rejection. MT is under no obligation to provide any Goods or services to the Customer at an incorrect (lower) price, even after MT has sent a Dispatch Confirmation or a Service Confirmation in relation to those Goods or services if such incorrect price could reasonably have been expected to be recognised by the Customer as an error. 8. Delivery and Availability The Customer’s order for Goods will be fulfilled by the delivery date in the Dispatch Confirmation or, if no delivery date is specified, then within 30 days of the date the Customer made his order (where such an order leads to a Contract). The period for delivery or performance of the Contract will normally commence on MT’s acknowledgement of the order. However, if the Customer is required to do anything before MT can effect delivery, MT will, as soon as practicable, notify the Customer accordingly. The time within which MT must deliver any Goods will run from the date on which MT receives notice from the Customer that it has duly complied with such notification from MT. Unless otherwise agreed in writing, any periods mentioned in the acknowledgement of order for services and Software development are based on a preliminary estimate of the required workload and therefore are approximate only. Time of delivery and performance is not of the essence. If MT fails to meet any delivery or performance dates set out in the acknowledgement of order and is solely responsible for such failure, the Customer may terminate the Contract but only after MT has been given an opportunity to rectify the situation and subsequently fails to meet the revised set of delivery or performance dates provided by MT to the Customer in writing. Unless MT has been deliberately or grossly negligent, all further claims of the Customer on the basis of the delay in performance are excluded. If MT cannot deliver or perform its obligations under the Contract due to Force Majeure or a failure of the Customer to cooperate or any other act, default or omission of the Customer, then MT will be entitled to perform its obligations under the Contract once the issue has been resolved, provided the issue occurred while MT was still allowed to deliver or perform and MT shall have no liability whatsoever for any delay or its failure to perform its obligations. 9. Agreed Performance Unless specified otherwise in writing, the agreed performance in respect of any repairs provided by MT, at the Customer’s request will be to adjust the relevant unit(s) to MT’s applicable standard specifications for that unit. Where the relevant unit(s) cannot be repaired to MT’s applicable standard specification due to the Customer limiting the repairs required or the time and money to be invested MT may exceed the Customer’s request if MT considers, at its sole discretion, that such additional repairs are reasonable and will ensure the proper functionality of the unit in question. The agreed performance levels for MT’s maintenance and care services are as set out in Conditions 26 and 28 below; for all other services the agreed performance levels will be as set out in the acknowledgement of order. 10. Refunds Where the Customer returns Goods (at the Customer’s cost) because he or she claims that the Goods are defective, MT will examine the returned Goods and will notify the Customer of its findings within a reasonable period of time. If MT (in its sole discretion) deems that the Goods are defective, MT may at its option repair, replace or provide a refund in respect of such defective Goods. MT will process any repair, replacement or refund as soon as practicable and, in the case of any refund, within 30 days of the day MT confirmed to the Customer that the Customer was entitled to the same. Such refunds will be made in full, including a refund of any delivery charges for sending the item to the Customer. 11. Import Duty If the Customer orders Goods for delivery outside the UK, they may be subject to import duties and taxes which are levied when the delivery reaches the specified destination. The Customer will be responsible for payment of any such import duties and taxes. Please note that MT has no control over these charges and cannot predict their amount. Customers should contact their local customs office for further information before placing an order. Customers must comply with all applicable laws and regulations of the country for which the Goods are destined. The Customer will indemnify and keep indemnified MT in respect of all costs, proceedings, losses and liabilities resulting from any breach by the Customer of any such laws. 12. Retention of Title to Property The Goods will be at the Customer’s risk from the time of delivery. Property in and title to all Goods will remain with MT until MT has received payment for the full price of all the Goods (and/or all other goods and/or services supplied by MT to the Customer under any other contract whatsoever).. The Customer may sell or use Goods in which title is retained during the course of their normal business, but may not give such Goods by way of pledge or pledge these Goods as security. Until the property in and title to the Goods passes to the Customer: the Customer shall keep the Goods properly stored, protected and insured and separate from all or any other goods whether belonging to MT, the Customer or any third party; MT shall be entitled at any time forthwith to revoke the Customer’s power to deal with the Goods; and such power shall automatically cease if an Insolvency Event shall occur in respect of the Customer; and the Customer shall not make any modification to the Goods, the Software or their packaging or alter, remove or tamper with any marks, numbers or other means of identification used on or in relation to the Goods. Upon termination of the Customer’s power to deal with the Goods, the Customer shall place the Goods at the disposal of MT and MT are hereby irrevocably authorised without the need for consent of any third party but using only such force as may be necessary, to enter upon any premises of the Customer or any third party for the purpose of removing the Goods. If third parties claim title to Goods with retained title, the Customer will inform MT without delay, will notify the person making the claim of MT’s title and will support MT in enforcing its rights, including taking all the necessary steps required to preserve MT’s rights, including commencing litigation at the Customer’s own expense. If the Customer breaches the Contract, e. g. by delaying payment, the Customer will be obliged to return the Goods with retained title if requested by MT, in return for which MT will not terminate the Contract. 13. Payment Where services, maintenance or care are provided on an ongoing basis, MT will invoice the Customer for these at the beginning of the billing period or as soon as reasonably practicable thereafter. The Customer will pay MT’s invoices in full within 30 days from the date of the relevant invoice. Depending on the scope of an order, payments for such services, maintenance or care are due either upon placement of the order by the Customer or upon partial delivery of the same of between 40 to 50% of their respective order value. BACS or cheque are the only methods of payment accepted. Invoices for Seminars and Training Sessions will be issued at the beginning of the respective session and payment is due immediately and without deduction. 14. Delay of Payment Where a Customer fails to pay an invoice by the due date, MT will be entitled to charge the Customer interest on all monies outstanding from the due date until the actual date of payment (both before and after judgment) at a rate of 8% above the base rate of the Bank of England calculated on a daily basis. 15. Setting-Off and Refusal of Payment The Customer cannot exercise any right of set-off in respect of amounts owed to or by MT. 16. Change of Pricing by MT for Ongoing Maintenance or Care MT may increase its prices for maintenance and services by giving the Customer written notice 2 months prior to the end of the Minimum Term. The Customer has 4 weeks from the date of receipt of the written notice from MT to object to the change. Where the Customer so objects, the Customer will be entitled to give notice to MT to terminate the Contract as of the date of the proposed price increase. 17. Automatic Extension of Contract Where services, maintenance or care are performed on an ongoing basis the Contract will come into effect upon acceptance by MT of the first order from the Customer for Software maintenance. The Contract will initially run until the date specified at “Minimum Service Duration” as set out in the “MT Service Product List” or until the expiry date where an expiry date is stipulated in the Contract (“Minimum Term”). Subject to one of the Parties serving written notice of termination on the other at least three months prior to the expiry of the Minimum Term, the Contract will be extended automatically. In the case of Software Licences supplied without a time limit, the Contract will extend until December 31st of the current year. The subsequent extension periods will begin on January 1st and end on December 31st of the respective year. In the case of Software Licences supplied with limited validity (e.g. a licence for 1-year) the extension is based on the terms and conditions set out in the description of the respective licence (e.g. extension by one further year). Unless otherwise agreed in writing, any extension to a Contract will be on the basis of MT’s current price list as at the date of such extension. 18. Delivery Obligations and Shipping The conditions for EXW (ex works) (MT’s premises or such other place referred to in the relevant order) as set out in the Incoterms 2010 apply to delivery of any Goods. Claims for any transport damages and any replacement of damaged Goods, remain with the Customer who is responsible for adhering to the mode and period for the filing of any claims with carriers, shippers and insurers. 19. Scope of Warranty (Material Deficiencies and Deficiencies in Title) MT warrants that the Hardware is free from defects in workmanship and material as at the time of transfer of risk; and warrants that the Software does not contain any flaws which void or substantially reduce its value or suitability for the usual or contracted purpose. Where MT is not the author of the Software, MT does not warrant that such Software will run without interruptions or errors, nor that MT will be capable of resolving all Software errors, nor that the Customer will be capable of achieving all of the functions included in the Software in all of the combinations chosen by the Customer, nor that these will meet the Customer’s requirements. MT will only warrant the quality and/or durability of Goods if it has expressly agreed in writing with the Customer that it will do so. The warranty period is 1 year. Where MT is the author of the Software such Software is subject to MT’s standard warranty. 20. Obligation to Inspect and Serve Notice of Defects The Customer must inspect the Goods upon delivery or repair and must notify MT in writing of any failure by MT to meet the specification within 7 days of delivery or repair or (where the failure was not apparent on reasonable inspection) within a reasonable time being no more than 1 month after discovery of the failure. Where the Customer fails to provide such notice MT will have no liability under its warranty. 21. Liability Subject only to Condition 21 d), MT shall not be liable to the Customer in contract, tort (including without limitation negligence) and/or breach of statutory duty for any loss or damage which the Customer may suffer by reason of any act, omission, neglect or default (including negligence) in the performance of the Contract by MT, its servants or agents, in a sum which is greater than GBP 200,000 per incident or series of connected incidents. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect loss of any kind resulting from these Conditions, its performance or any breach of its terms. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect economic loss of any kind including (but without limitation) loss of business opportunity, reputation, goodwill resulting from these Conditions, its performance or any breach of its conditions. Notwithstanding any other provision herein, nothing in these Conditions shall operate so as to limit or exclude MT’s non-excludable liability in respect of death or personal injury caused by the negligence of MT to exclude the application of Section 12 of the Sale of Goods Act 1979 and to exclude liability for fraudulent misrepresentation. MT’s liability for loss of data is limited to the effort required to restore the data from proper backups provided by the Customer. 22. Third Party Rights If any third party claims or takes action against the Customer, because Goods delivered by MT, or their use in accordance with the instructions provided by MT, purportedly violate their commercial rights or proprietary rights, then the Customer will inform MT of the same. MT agrees that they will assist the Customer in defending such claims. Where the claim is made to the Customer within 12 months of the date of delivery, MT will indemnify the Customer against claims provided that the Customer: appoints MT to defend the claims or to settle the dispute, and promptly notifies MT of any such claim, keeps the Customer informed of all information received and provides such reasonable assistance to MT as it shall reasonably require, does not defend the action itself without coordinating such defence with MT, and does not at any time admit liability or otherwise settle or compromise or attempt to settle or compromise the said claim or action except upon the express instruction of MT, the alleged breach of rights is not based on alteration of the delivered item used by the Customer, and does not use the item delivered by MT in conjunction with other items and/or in a fashion that breaches any such rights, in a situation where the use of the item as delivered by MT would not have breached the rights of the person who has filed the claim. MT may at any time and at its own expense acquire on behalf of the Customer the right to continue to use the Goods, to replace the Goods or alter them in such a fashion that the rights of others are no longer breached. If this is not possible, the Customer shall return or destroy the Goods if required to do so by MT who will reimburse the purchasing price for the Goods less depreciation. If the Customer refuses to do so, MT will no longer defend the claim or provide the Customer with any further support. The Customer has no further rights in case of disputes over proprietary rights with third parties and MT shall have no liability therefore unless MT could be blamed for acting deliberately or with gross negligence. Part IV Special Conditions for Delivery of Software 23. Conditions of Use for Delivered Software In the case of delivery of Software to the Customer, MT hereby grants the Customer a simple, non exclusive and non-transferable, licence to use the Software (“Licence”) . The validity of the Licence is not time limited, unless otherwise specified to the contrary in the terms and conditions of the Licence. MT, grants the Customer the use of such Software in the form of the object code and the user documentation with the use being restricted to one electronic data processing system at any one time and only for the tasks for which it is intended. Unless permitted by law, the Customer will not decompile the Software or perform reverse engineering. The Customer may duplicate the Software but only to the extent that this is required for the permitted use, and in order to allow it to perform data backup. Upon delivery of any Software, including updates and upgrades, the Customer will immediately produce a backup copy. MT may terminate the Licence granted to the Customer pursuant to this Condition 23 with immediate effect if the Customer is in breach of the conditions for the use of the Software for a period of 30 days from the date of a written notice of such a breach from MT or any third party. On termination of this Contract howsoever arising, the Customer will return to MT within 30 days all Software together with any related materials owned and licensed by MT and shall delete all copies and partial copies of the Software however stored within 7 days of service of the notice. Proof of such deletion must be provided to MT without delay. On receipt of prior written consent from MT, the Customer may retain a copy of the Software for the purposes of archiving. 24. Delivery of Software MT will only install the Software if this has been expressly agreed in writing between the Customer and MT. MT is able to provide telephone consultancy and support concerning questions relating to the application of the respective Software products as well as the solution of problems that may occur as provided for in Condition 26 below. 25. Prerequisites for Running the Delivered Software The proper running of Software systems supplied will only be guaranteed if the Hardware and operating system components used correspond to the reference systems of the respective manufacturer(s), as well as having been approved and certified. Unless otherwise agreed in the Contract, the Customer shall ensure that the provisions in this Condition 25 are complied with. Part VMaintenance and Care Application Software 26. Scope of Performance of MT Services for Application Software For the Software products, unless otherwise expressly agreed in writing, MT will provide the following services, denoted by Service Level “SW-Service STANDARD” and Service Level “SW-Service E-STANDARD”: Right to use Software and documentation updates: MT grants the Customer a non-transferable, non-exclusive Licence to use the Software and any documentation or updates. The right of use is not limited in validity, unless otherwise specified in the terms and conditions of the Licence. Software and documentation updates: MT will supply the Customer with the current version of the Software as specified in the Contract. This will be done as specified by the manufacturer of the Software. The documentation will be supplied in the form determined by the manufacturer of the Software. The installation of Software updates will be performed by suitably qualified personnel of the Customer. Alternatively for an additional charge, MT may install the Software updates on behalf of the Customer. Where the Customer has adapted the Software, the Customer will be liable for the additional cost of performing the same adaptation to the new version of the Software or alternatively the Customer may perform the necessary adaptation himself. Hotline (Service Level “SW-Service STANDARD” only) MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. E-mail Hotline (Service Level “SW-Service E-STANDARD” only) MT is able to provide e-mail consultancy and support in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours Wherever possible, qualified consultancy will be provided by MT within the Response Time. MT Hotline: E-mail: hotline@MT.com Internet: http://www.MT.com/customersupport Software error messages Where Software problems occur which MT is unable, for whatever reason, to resolve, the Customer may send a written error message to MT. The purpose of such an error message is to identify the error in the Software and enable the manufacturer to resolve the error. MT shall liaise with the manufacturer(s) of the Software products to resolve any Software errors as promptly as possible. Restoration of any data, regardless of the cause of the data loss, is not the responsibility of MT. 27. Obligation of the Customer to Co-operate Pre-conditions for the provision of the services by MT to the Customer are that the Customer has legally acquired the Software and holds a corresponding Licence to use it. In addition, the Software must be in the same condition that it was in when it was delivered. The services exclusively relate to the current release and delivered version of the Software. If earlier Software versions are used, a one-time update service which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Services will not be performed for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). If the operating system for the Hardware is not included in the Contract, the Customer must update the operating system to the most recent version (e. g. by purchasing updates) if this is required in order to use the new versions of the application Software. Hardware and Operating Systems 28. Scope of Performance of MT Maintenance and Care Services for Hardware and Operating System For Hardware products and the operating system, unless otherwise agreed in writing, MT will provide the following services, denoted by Service Level “HW-Service SPECIAL”: The scope of performance is briefly set out in the “Special Description” for each product listed in the attached “MT Service Product List”. The exact scope of performance will be determined in accordance with the attached description of performance issued by the respective MT service operator (“Service Operator” including but not limited to Hewlett-Packard, Fujitsu Siemens and Silicon Graphics). The following shall also apply: Hotline MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Hardware products and operating system, as well as the resolution, (in so far as it is reasonably practicable to do so) of any problems which may occur. This service will be performed by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. Where queries arise outside of the Contact Hours, the Customer should address such queries directly to MT’s Service Operator Response time for Hardware failures MT will use reasonable endeavours to solve a query within the Response Time. The Response Time shall be deemed to have been initiated either as soon as the customer service personnel arrives on the relevant site, or as soon as remote diagnosis is started, where either is required to resolve the problem. The appropriate Response Time will be determined in accordance with the attached description of performance issued by the respective MT Service Operator. 29. Services Not Included Unless otherwise agreed in writing, the following services will not be provided by MT to the Customer: a) Repair/re-acquisition of devices that have been damaged as a result of: incidents of war of any type civil wars, nuclear energy, deliberate action of the Customer (not of his subcontractors) b) Repair/re-acquisition that is required because of repair work or alterations of devices carried out by the Customer or any third party without the prior written consent of MT. c) Work required due to interface problems between MT’s devices and those of other manufacturers and suppliers. d) Customer service which is required because a product that is not covered under this Contract has caused an error. e) Customer service that has become necessary because devices have been used under adverse conditions (e.g. including contaminations and deviations from recommended room temperature and relative humidity) or in conjunction with accessories or (device-specific) consumables (e.g. including foreign disks, disk stacks, cassettes, printer paper and print heads of any type) (“Device Specific Consumables”) which do not meet the manufacturer’s specifications. f) Replacement of Device-Specific Consumables. g) Data backup. h) Calibration work that is not related to repair. 30. Restoration of Data/Programs The restoration of data and programs upon repair or replacement of a defective hard disk is limited to starting the copying program (Restore) used to restore the last full data backup. 31. Obligation of the Customer to Cooperate a) Hardware service Pre-conditions for the provision of Hardware services by MT are that the Hardware has been acquired legally and has been installed properly at the Customer’s site. In addition the Hardware affected must correspond to the current revision and be in proper condition when including in the Contract. These pre-conditions shall be met immediately after the expiry of the warranty period specified in the Contract. If the Hardware is included in the Contract at a later date, these pre-conditions must first be confirmed by a takeover inspection of the Hardware by MT, which will be independently invoiced and paid for by the Customer, and if required the pre-conditions will be achieved by MT undertaking the required repair work. b) Operating System Service Pre-conditions for the provision of operating system services are that the Customer has legally acquired the Software and has been granted the necessary corresponding Licence to use it. In addition the Software must be in the same condition as when it was delivered to the Customer. The services exclusively relate to the current release and version of the Software. If earlier Software versions are used, a one-time “Update Service” which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Operating System services will not be provided for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). Part VI Generally Applicable Conditions 32. Prices and Fees for Special Services The following items are not included in the payment for services under Conditions 26 and 28 above and will be invoiced separately in accordance with MT’s current price list: Services performed outside Working Hours on the express request of the Customer. Services to correct errors caused negligently by the Customer or by any unauthorised third party as a result of improper treatment, unsuitable operating media, unauthorised manipulations, Software manipulations, non-adherence to operating conditions or otherwise. ices required due to faulty handling, excessive vibration, chemical influence, excessive dust burden or non-adherence to the properties set forth in the unit specifications. Unreasonable wait times and delays in the performance of services which are caused by the Customer. Services to remedy failures caused by Force Majeure. 33. Backup of Customer Data Prior to the commencement of any service work undertaken by MT, the Customer will backup all data in such a way that it may easily be restored by MT in the event that it is lost in the service process. 34. Change of Installation/Application Site Where maintenance and care services are provided on an ongoing basis by MT, the Customer will immediately inform MT in writing of any change to the installation or application address. If such a change results in an increase in MT’s expenses. MT reserves the right to either increase the prices charged to recover the additional expense incurred or alternatively MT may serve notice on the Customer to terminate the Contract where the new address is outside United Kingdom. 35. Miscellaneous Service Conditions and Obligations of the Customer to Co-operate MT may appoint authorised third parties to provide services. The Customer may only transfer title to services to third parties with the prior written consent of MT. Where defective components or devices are replaced by MT, these will become the property of MT. Extension of the products included in the maintenance agreement may be included in this Contract with the consent of the Customer. On request, MT will offer to the Customer a corresponding extension of the Contract, provided maintenance for the respective product is available. Where MT has to perform any services, the Customer shall accurately and without delay provide MT with any/all information that is required to perform such services. The Customer will provide MT with the name of a competent and appropriately qualified contact person and will provide the name of an appropriate substitute in order for the Hardware and Software to be maintained. Any contact(s) will have participated in the respective Seminars and/or Training Sessions held from time to time by MT or alternatively will have acquired comparable knowledge. These contacts will be available to MT’s technicians on site or will have access to the MT’s hotline as applicable. Consumables and Auxiliaries (which shall include documentation, application programs, data, telephone lines for transmission of voice and data) are not included in the scope of performance and shall be provided by the Customer in the vicinity of the system, such consumables and auxiliaries will be provided during Working Hours or, with prior consultation, outside of these hours. Additionally, the Customer will provide to MT computing time and consumables as required. 36. Specifically Ordered Service Days If service days are ordered for call-off within a specified period, such orders are binding. The services will become due for payment once they have been performed or by the end of the defined time period at the latest. Specifically ordered service days to be called off within a defined time period, can still be called off during a time of three months beyond the expiry of such defined time period. Thereafter they are lost. The claim to payment is thereby unaffected. For users that register on our website (if any), we also store the personal information they provide in their user profile. All users can see, edit, or delete their personal information at any time (except they cannot change their username). Website administrators can also see and edit that information.

Message

Courses matching "subordinate"

Show all 37

German Language: Intermediate Level

5.0(10)

By Apex Learning

Overview This comprehensive course on German Language: Intermediate Level will deepen your understanding on this topic. After successful completion of this course you can acquire the required skills in this sector. This German Language: Intermediate Level comes with accredited certification from CPD, which will enhance your CV and make you worthy in the job market. So enrol in this course today to fast track your career ladder. How will I get my certificate? You may have to take a quiz or a written test online during or after the course. After successfully completing the course, you will be eligible for the certificate. Who is This course for? There is no experience or previous qualifications required for enrolment on this German Language: Intermediate Level. It is available to all students, of all academic backgrounds. Requirements Our German Language: Intermediate Level is fully compatible with PC's, Mac's, Laptop, Tablet and Smartphone devices. This course has been designed to be fully compatible with tablets and smartphones so you can access your course on Wi-Fi, 3G or 4G. There is no time limit for completing this course, it can be studied in your own time at your own pace. Career Path Having these various qualifications will increase the value in your CV and open you up to multiple sectors such as Business & Management, Admin, Accountancy & Finance, Secretarial & PA, Teaching & Mentoring etc. Course Curriculum 1 sections • 29 lectures • 06:54:00 total length •Learn German - Famous Germans of the present: 00:19:00 •Learn German - The imperfect (weak verbs): 00:11:00 •Learn German - The imperfect of 'having,' 'being,' and 'becoming': 00:11:00 •Learn German - The past tense of strong verbs: 00:15:00 •Learn German - Exercises - Imperfect and explanations: 00:12:00 •Learn German - Recap - Nominative and Accusative: 00:10:00 •Learn German - Exercises and examples with the Nominative and A: 00:24:00 •Learn German - The Dative: 00:17:00 •Learn German - The Dative - Exercises: 00:17:00 •Learn German - The Genitive: 00:13:00 •Learn German - The Genitive - Exercises: 00:19:00 •Learn German - Two-way prepositions: 00:11:00 •Learn German - Brief History of Germany I: 00:16:00 •Learn German - Brief History of Germany II: 00:18:00 •Learn German - Brief History of Germany III: 00:14:00 •Learn German - What is German- Part I: 00:11:00 •Learn German - What is German- Part II: 00:16:00 •Learn German - German dialects still spoken today: 00:11:00 •Learn German - Recap exercises Lessons 2-10: 00:12:00 •Learn German - Recap exercises Lessons 11-19: 00:12:00 •Learn German - The Syntax - Part I- The main clause (I): 00:12:00 •Learn German - The Syntax - Part I- The main clause (II): 00:11:00 •Learn German - The Syntax - Part II- The subordinate clause: 00:11:00 •Learn German - The Syntax - Part II- The subordinate clause (I+II): 00:12:00 •Learn German - The Syntax - Part III- The Conjunctions: 00:19:00 •Learn German - Exercises for Conjunctions, Subjunctions, Conjunct: 00:16:00 •Learn German - Often used subordinate clauses with subjunctions: 00:13:00 •Learn German - Exercises with subordinate clauses with subjunctio: 00:14:00 •Learn German - Recap exercises Lessons 22-29: 00:17:00

German Language: Intermediate Level
Delivered Online On Demand6 hours 54 minutes
£12

Learn German Language: Complete German Course - Intermediate

By iStudy UK

Accompanying this Learn German Language: Complete German Course - Intermediate course step-by-step can increase your understanding of German grammar and help you instantly gain a solid understanding of the most dominant approaches and concepts that can exceedingly help you in learning German. The core of this course is to introduce you to every aspect that you need to know about German to have the real conversation with a native German speaker. You will introduce with the vocabulary, grammatical rules, vowel sounds, pronunciation, sentence structure, punctuation, and a detailed outline of the German language. The course will benefit you in strengthening your communication skills and fluency in this language. Upon successful completion of this course, you will be able to converse in a German accent and write the German language. What you'll learn The #1 German Course for Intermediate. Reach your German language goals now and in the future, increasing your opportunities for both personal and professional success. German vocabulary, German grammar rules (covering verbs, tenses, German syntax and many more), German pronunciation (thanks to the native German speaking teacher), famous Germans, a brief history of Germany, German dialects. Speaking real, grammatically correct German fluently, effortlessly and confidently. Improve your listening and comprehension skills with native German through ear training and visual learning thanks to the native German speaking teacher, interactive board and included .pdf materials. Be confident regarding your German skills (B1 level, intermediate German) by lots of practice after every lesson. Requirements Beginner Level German knowledge is required. Videos are in German language. Native German speaking Teacher. Included: Free Demo Lessons & .pdf materials. Who is the target audience? Anyone who wants to learn German fast and easy. Anyone who wants to advance to the intermediate level of German Language. If you are nearly advanced you can improve your German with this course. Introduction Learn German - Famous Germans of the present FREE 00:19:00 Learn German - The imperfect (weak verbs) 00:11:00 Learn German - The imperfect of 'having,' 'being,' and 'becoming' 00:11:00 Learn German - The past tense of strong verbs 00:15:00 Learn German - Exercises - Imperfect and explanations 00:12:00 Learn German - Recap - Nominative and Accusative 00:10:00 Learn German - Exercises and examples with the Nominative and A 00:24:00 Learn German - The Dative 00:17:00 Learn German - The Dative - Exercises 00:17:00 Learn German - The Genitive 00:13:00 Learn German - The Genitive - Exercises 00:19:00 Learn German - Two-way prepositions 00:11:00 Learn German - Brief History of Germany II 00:18:00 Learn German - Brief History of Germany III 00:14:00 Learn German - What is German- Part II 00:16:00 Learn German - German dialects still spoken today 00:11:00 Learn German - Recap exercises Lessons 2-10 00:12:00 Learn German - Recap exercises Lessons 11-19 00:12:00 Learn German - The Syntax - Part I- The main clause (I) 00:12:00 Learn German - The Syntax - Part I- The main clause (II) 00:11:00 Learn German - The Syntax - Part II- The subordinate clause 00:11:00 Learn German - The Syntax - Part II- The subordinate clause (I+II) 00:12:00 Learn German - The Syntax - Part III- The Conjunctions 00:19:00 Learn German - Exercises for Conjunctions, Subjunctions, Conjunct 00:16:00 Learn German - Often used subordinate clauses with subjunctions 00:13:00 Learn German - Exercises with subordinate clauses with subjunctio 00:14:00 Learn German - Recap exercises Lessons 22-29 00:17:00 Course Certification

Learn German Language: Complete German Course - Intermediate
Delivered Online On Demand6 hours 27 minutes
£25

Complete German Course - Intermediate

4.3(43)

By John Academy

Learn the different effective methods related to the German language through our Complete German Course - Intermediate course. The precise outlines of the course enable you to be an expert in the German language. The course designs to teach you the core function of the German language along with its vocabulary, grammatical rules, pronunciation, sentence structure, punctuation, and a synopsis of the German language. It also guides you how to write formal, informal letter, application, and CV maintaining proper syntactical order of the sentence, and grammatical rules. The course also instructs you how to develop your communication skills and fluency in this language so that you can mastery over it. The purpose of the course is to enable you to face different interviews, presentations with a sound German accent, write the German language, and place the exact word of the German language in a sound bite. Assessment: This course does not involve any MCQ test. Students need to answer assignment questions to complete the course, the answers will be in the form of written work in pdf or word. Students can write the answers in their own time. Once the answers are submitted, the instructor will check and assess the work. Certification: After completing and passing the course successfully, you will be able to obtain an Accredited Certificate of Achievement. Certificates can be obtained either in hard copy at a cost of £39 or in PDF format at a cost of £24. Who is this Course for? Complete German Course - Intermediate is certified by CPD Qualifications Standards and CiQ. This makes it perfect for anyone trying to learn potential professional skills. As there is no experience and qualification required for this course, it is available for all students from any academic background. Requirements Our Complete German Course - Intermediate is fully compatible with any kind of device. Whether you are using Windows computer, Mac, smartphones or tablets, you will get the same experience while learning. Besides that, you will be able to access the course with any kind of internet connection from anywhere at any time without any kind of limitation. Career Path After completing this course you will be able to build up accurate knowledge and skills with proper confidence to enrich yourself and brighten up your career in the relevant job market. Module 1 Learn German - Famous Germans of the present 00:19:00 Learn German - The imperfect (weak verbs) 00:11:00 Learn German - The imperfect of 'having,' 'being,' and 'becoming' 00:11:00 Learn German - The past tense of strong verbs 00:15:00 Learn German - Exercises - Imperfect and explanations 00:12:00 Learn German - Recap - Nominative and Accusative 00:10:00 Learn German - Exercises and examples with the Nominative and A 00:24:00 Learn German - The Dative 00:17:00 Learn German - The Dative - Exercises 00:17:00 Learn German - The Genitive 00:13:00 Module 2 Learn German - The Genitive - Exercises 00:19:00 Learn German - Two-way prepositions 00:11:00 Learn German - Brief History of Germany II 00:18:00 Learn German - Brief History of Germany III 00:14:00 Learn German - What is German- Part II 00:16:00 Learn German - German dialects still spoken today 00:11:00 Learn German - Recap exercises Lessons 2-10 00:12:00 Learn German - Recap exercises Lessons 11-19 00:12:00 Learn German - The Syntax - Part I- The main clause (I) 00:12:00 Learn German - The Syntax - Part I- The main clause (II) 00:11:00 Module 3 Learn German - The Syntax - Part II- The subordinate clause 00:11:00 Learn German - The Syntax - Part II- The subordinate clause (I+II) 00:12:00 Learn German - The Syntax - Part III- The Conjunctions 00:19:00 Learn German - Exercises for Conjunctions, Subjunctions, Conjunct 00:16:00 Learn German - Often used subordinate clauses with subjunctions 00:13:00 Learn German - Exercises with subordinate clauses with subjunctio 00:14:00 Learn German - Recap exercises Lessons 22-29 00:17:00 Order Your Certificates and Transcripts Order Your Certificates and Transcripts 00:00:00

Complete German Course - Intermediate
Delivered Online On Demand6 hours 27 minutes
£25

Negotiation Skills and Techniques for Engineers and Technical Professionals

By EnergyEdge - Training for a Sustainable Energy Future

Develop essential negotiation skills with EnergyEdge's course tailored for engineers and technical professionals. Enroll in our classroom training now!

Negotiation Skills and Techniques for Engineers and Technical Professionals
Delivered In-Person
£2,099 to £2,299

Negotiation Skills and Techniques for Engineers and Technical Professionals

By EnergyEdge - Training for a Sustainable Energy Future

About this Training Course This is a 2 full-day course that is aimed at providing professionals in the Oil & Gas business with a comprehensive set of core negotiating skills. Negotiations take place in many situations e.g. between peers, manager and subordinate, company and trade unions, company and government. The skills learnt on this course will be useful in all of these situations. However, this course puts a focus on the skills needed in commercial negotiations. A particular emphasis is placed on the relationship and negotiations typically carried out between client and contractor, vendor or the provider of services. A mixture of theory, examples and practical exercises are used so that the participants understand the principles and get an opportunity to try them out. The case studies used are real cases encountered in the Oil & Gas industry. Training Objectives Many technical experts find it difficult to move out of their expertise areas and deal with commercial matters. Negotiating to optimise business value is a step further from their comfort zones. All too often negotiations are then left to finance personnel. They bring many strengths to the table but an understanding of engineering trade-offs is not one of them. By the end of this course, the participants will add to their technical know-how a core competence in negotiation skills. They will thus become formidable negotiating opponents. Target Audience The course is intended for middle-managers and technical and other staff who are responsible for contracts, but with limited previous exposure to negotiations, and who will need these skills in the near future. Course Level Intermediate Trainer Your expert course leader is a consultant, manager and engineer with more than 30 years' experience in a broad range of positions. He spent 15 years with the Shell group and during this time, gained extensive negotiating experience with contractors, vendors, service agents, trade unions and purchasers of equipment and products. Over the last 15 years, he has worked with a broad range of multinational businesses across the globe in a wide range of negotiation related roles including: Developing negotiating capability and skillsets Advising on negotiation strategies Establishing Alliances, Joint Ventures and Partnerships, & Remediating Alliances, Joint Ventures and Partnerships He has many years of teaching experience to technical staff - both in a corporate setting, and in an academic setting - for Melbourne University in Melbourne, Australia. Several thousand people from around the world have benefited from his courses. He brings an engineer's practical perspective, and can readily empathize with technical staff making forays into the commercial world of negotiations. He is joint author (with Professor Danny Samson) of Patterns of Excellence ISBN 0273638769, published by Financial Times Management. This has been adopted by a number of blue chip companies as the core text for management development. Corporate Experience: 15 years with Shell in a broad range of international & domestic technical and managerial and change management roles. Consulting Experience: 5 Years with McKinsey Consulting Group 4 Years with Melbourne Business Schoo POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Negotiation Skills and Techniques for Engineers and Technical Professionals
Delivered in Internationally or OnlineFlexible Dates
£2,407 to £2,799

Caring for the Elderly

By OnlineCoursesLearning.com

Caring for the Elderly Course Description: Old consideration centers around the old's close to home and social requirements, incorporating assist with medical services and day by day exercises. The old longing to age with pride. Accordingly, there is a requirement for customisation of exercises, lodging, preparing of representatives and administrations to suit the particular necessities of the old. A huge level of older consideration overall falls under the casual or neglected market section. Maturing is unavoidable and influences all families. Grown-ups envisioning their folks as older probably won't give the correct picture of what their maturing will undoubtedly mean for them. This is all the more so obvious if guardians are now matured, yet at the same time sound and sufficiently able to really focus on themselves. Grown-ups probably won't get an excellent of the worries or sensational changes that regularly happen when matured guardians become subordinate. Nonetheless, a period comes when the effect of guardians' maturing becomes clear, consequently the requirement for long haul care. As individuals age, they experience a decrease in mental and actual essentialness. Accordingly, the matured experience noticeable, radical changes in norm of life, appearance and surprisingly enthusiastic prosperity. What You Will Learn: In this course, you will gain proficiency with the accompanying: The embodiment of old consideration Day by day living exercises Instrumental every day living exercises Living game plans for the older Financing care for the old Assets and strong gatherings for old consideration The best consideration for the matured   Advantages of Taking the Course Taking this course will help you learn: About the need to really focus on the old The most effective method to really focus on the old What's associated with really focusing on the older About the different gatherings associated with old consideration About living course of action choices accessible for the old About the best consideration for the older

Caring for the Elderly
Delivered Online On Demand
£50

The Financial Services and Markets Act

By OnlineCoursesLearning.com

Introduction: Finance is key to economic development. It provides an investment basis and supports the flow of income and expenses. A country's financial sector transforms its economic savings into investments. An efficient financial sector does not just accomplish that, but also encourages savings and increased investment. Eventually, it results in increased income levels, and faster economic growth of the country. The financial sector also provides money and methods of payments to support the exchange of economic goods and services. However, financial regulation is key to the efficient functioning of the financial sector. Financial regulation comes in to offer varied benefits to both consumers and players in the industry. This course covers the Financial Services and Markets Act (FSMA) in the United Kingdom. It is a key regulator of the UK financial sector. First, we give extensive details about the Act. The course explains what it is and the varied functions it plays in the UK's financial sector. It further explains the different regulatory bodies that work under the Financial Services and Markets Act, including subordinate legislation. Next, it states the various regulated financial activities in the UK under the financial framework. Finally, it concludes with a few benefits of regulating a financial services market.   What You Will Lean: What the Financial Services and Markets Act is and what it does The key roles and functions of the FSMA The regulatory bodies working under the Financial Services and Markets Act The benefits of regulating the financial services sector The varied functions of the FCA, PRA and FPC Benefits of This Course Taking this Course Will Help You: Understand the role of financial regulators Understand the different aspects of the financial services sector that the Act affects Understand the Financial Services and Markets Act and its role in the UK's financial services sector Learn the various bodies or regimes involved in financial regulation Learn the importance of financial regulation Gain basic knowledge of industry regulation before entering the financial sector to start a business

The Financial Services and Markets Act
Delivered Online On Demand
£50

The German Syntax Masterclass Course Online

By Study Plex

Highlights of the Course Course Type: Online Learning Duration: 1 to 2 hours Tutor Support: Tutor support is included Customer Support: 24/7 customer support is available Quality Training: The course is designed by an industry expert Recognised Credential: Recognised and Valuable Certification Completion Certificate: Free Course Completion Certificate Included Instalment: 3 Installment Plan on checkout What you will learn from this course? Gain comprehensive knowledge about German language Understand the core competencies and principles of German language Explore the various areas of German language Know how to apply the skills you acquired from this course in a real-life context Become a confident and expert German language instructor or speaker The German Syntax Masterclass Course Master the skills you need to propel your career forward in German language. This course will equip you with the essential knowledge and skillset that will make you a confident German language speaker and take your career to the next level. This comprehensive the German syntax masterclass course is designed to help you surpass your professional goals. The skills and knowledge that you will gain through studying this the German syntax masterclass course will help you get one step closer to your professional aspirations and develop your skills for a rewarding career. This The German Syntax Masterclass at QLS Level 5 course is endorsed by the Quality Licence Scheme for its high-quality, non-regulated provision and training programmes. The Quality Licence Scheme is a brand of the Skills and Education Group, a leading national awarding organisation for providing high-quality vocational qualifications across a wide range of industries. This comprehensive course will teach you the theory of effective German language practice and equip you with the essential skills, confidence and competence to assist you in the German language industry. You'll gain a solid understanding of the core competencies required to drive a successful career in German language. This course is designed by industry experts, so you'll gain knowledge and skills based on the latest expertise and best practices. This extensive course is designed for German language speaker or for people who are aspiring to specialise in German language.This The German Syntax Masterclass at QLS Level 5 course has been endorsed by the Quality Licence Scheme for its high-quality, non-regulated provision and training programmes. This course is not regulated by Ofqual and is not an accredited qualification. Enrol in this the German syntax masterclass course today and take the next step towards your personal and professional goals. Earn industry-recognised credentials to demonstrate your new skills and add extra value to your CV that will help you outshine other candidates. Who is this Course for? This comprehensive the German syntax masterclass course is ideal for anyone wishing to boost their career profile or advance their career in this field by gaining a thorough understanding of the subject. Anyone willing to gain extensive knowledge on this German language can also take this course. Whether you are a complete beginner or an aspiring professional, this course will provide you with the necessary skills and professional competence, and open your doors to a wide number of professions within your chosen sector. Entry Requirements This the German syntax masterclass course has no academic prerequisites and is open to students from all academic disciplines. You will, however, need a laptop, desktop, tablet, or smartphone, as well as a reliable internet connection. Assessment This the German syntax masterclass course assesses learners through multiple-choice questions (MCQs). Upon successful completion of the modules, learners must answer MCQs to complete the assessment procedure. Through the MCQs, it is measured how much a learner could grasp from each section. In the assessment pass mark is 60%. Advance Your Career This the German syntax masterclass course will provide you with a fresh opportunity to enter the relevant job market and choose your desired career path. Additionally, you will be able to advance your career, increase your level of competition in your chosen field, and highlight these skills on your resume. Recognised Accreditation This course is accredited by continuing professional development (CPD). CPD UK is globally recognised by employers, professional organisations, and academic institutions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. The Quality Licence Scheme is a brand of the Skills and Education Group, a leading national awarding organisation for providing high-quality vocational qualifications across a wide range of industries. What is CPD? Employers, professional organisations, and academic institutions all recognise CPD, therefore a credential from CPD Certification Service adds value to your professional goals and achievements. Benefits of CPD Improve your employment prospects Boost your job satisfaction Promotes career advancement Enhances your CV Provides you with a competitive edge in the job market Demonstrate your dedication Showcases your professional capabilities What is IPHM? The IPHM is an Accreditation Board that provides Training Providers with international and global accreditation. The Practitioners of Holistic Medicine (IPHM) accreditation is a guarantee of quality and skill. Benefits of IPHM It will help you establish a positive reputation in your chosen field You can join a network and community of successful therapists that are dedicated to providing excellent care to their client You can flaunt this accreditation in your CV It is a worldwide recognised accreditation What is Quality Licence Scheme? This course is endorsed by the Quality Licence Scheme for its high-quality, non-regulated provision and training programmes. The Quality Licence Scheme is a brand of the Skills and Education Group, a leading national awarding organisation for providing high-quality vocational qualifications across a wide range of industries. Benefits of Quality License Scheme Certificate is valuable Provides a competitive edge in your career It will make your CV stand out Course Curriculum The German Syntax Masterclass General Introduction What is a Syntax 00:03:00 Course Overview 00:05:00 The Syntax of the Main Clause (Hauptsatz) 00:06:00 Main Clause: The Conjugated Verb On The 2nd Spot 00:06:00 Examples and Exercises - 2nd spot 00:07:00 Main Clause: The Non-Conjugated Verb Particle at The End 00:05:00 Examples - Verb Particle at the End 00:05:00 Exercises - Verb Particle at the End 00:04:00 The High Flexibility of the German Syntax 00:04:00 Examples - Flexibility 00:05:00 Examples - Cases Facilitate The Understanding 00:06:00 Main Clause - A Conjunction linking two Main Clauses 00:05:00 Examples - Two Main Clauses 00:05:00 The Syntax of the Subordinate Clause (Nebensatz) 00:08:00 Subordinate Clause - Initiated With a Subjunction 00:07:00 Relative Pronouns Also Have The Conjugated Verb at The End 00:06:00 Examples - At the End 00:09:00 Subordinate Clause - Initiated With a Conjunctional Adverb 00:05:00 The Difference Between a Conjunctional Adverb and a Conjunction/Subjunction 00:05:00 Examples - Conjunctional Adverb 00:06:00 The Interrogative Clause: Questions with Yes or No as an answer 00:04:00 The Interrogative Clause: Questions with an Interrogative Pronoun (W) 00:06:00 Examples and Exercises - Interrogative Clause 00:09:00 Summary 00:10:00 Supplementary Resources Supplementary Resources - The German Syntax Masterclass 00:00:00 Obtain Your Certificate Order Your Certificate of Achievement 00:00:00 Get Your Insurance Now Get Your Insurance Now 00:00:00 Feedback Feedback 00:00:00

The German Syntax Masterclass Course Online
Delivered Online On Demand
£19

German Language Course Intermediate Level

By Lead Academy

Quality Guarantee: Promising training excellence, satisfaction gurantee Accredited by CPD Certification Service Tutor Support Unlimited support via email, till you complete the course Recognised Certification: Accepted by thousands of professional bodies Start Anytime With 1 year access to the course materials Online Learning Learn from anywhere, whenever you want This course will help you to take your German language skills to a new level where you will learn advanced grammar, expand your vocabulary and perfect your pronunciation. After completing the course you will be able to communicate fluently in German in various situations and express your opinions. This course at a glance Accredited by CPD UK Understand the brief history of the German Language Get acquainted with German vocabulary and grammar rules Understand German pronunciation Learn how to speak real and grammatically correct German fluently Know German dialects, German writing and many teaching German exercises Understand German two-way prepositions Know German syntax - the main clause and the subordinate clause Practice German exercises for conjunctions, subjunctions, and conjunctive adverbs Understand how to use subordinate clauses with sub-junctions Learn German exercises and examples with nominative and accusative Why German Language Course Intermediate Level right for you? This comprehensive German language course intermediate level will help aspiring learners effectively understand German vocabulary and grammar rules such as verbs, tenses, and German syntax. This extensive course will enhance your listening and comprehension skills through ear training and visual learning. You will study German conjunctions, prepositions, subjunctions, and conjunctive adverbs in this interactive course. Besides that, this online course will update you on the history of the German language and other language components such as nominative and accusative, dative, genitive, and German dialects that are spoken today. By the end of the course, you will gain extensive skills and knowledge to have a good command of the written and spoken German language. German Language Course Intermediate Level Details Accredited by CPD certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Many organisations look for employees with CPD requirements, which means, that by doing this course, you would be a potential candidate in your respective field. Course Curriculum Introduction Lesson 1 Lesson 2 Lesson 3 Lesson 4 Lesson 5 Lesson 6 Lesson 7 Lesson 8 Lesson 9 Who should take this course? This comprehensive German language course intermediate level is suitable for those interested in learning German quickly or anyone who wants to advance to the intermediate level of the German language. It is ideal for those who want to improve their German language. Entry Requirements There are no academic entry requirements for this course, and it is open to students of all academic backgrounds. However, you are required to have a laptop/desktop/tablet or smartphone and a good internet connection. Assessment Method This German Language Course Intermediate Level assesses learners through multiple-choice questions (MCQs). Upon successful completion of the modules, learners must answer MCQs to complete the assessment procedure. Through the MCQs, it is measured how much a learner can grasp from each section. In the assessment pass mark is 60%. Certification Certificate of Achievement from Lead Academy After successfully passing the MCQ exam you will be eligible to order your certificate of achievement as proof of your new skill. The certificate of achievement is an official credential that confirms that you successfully finished a course with Lead Academy. Certificate can be obtained in PDF version at a cost of £12, and there is an additional fee to obtain a printed copy certificate which is £35. FAQs Is CPD a recognised qualification in the UK? CPD is globally recognised by employers, professional organisations and academic intuitions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. CPD-certified certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Are QLS courses recognised? Although QLS courses are not subject to Ofqual regulation, they must adhere to an extremely high level that is set and regulated independently across the globe. A course that has been approved by the Quality Licence Scheme simply indicates that it has been examined and evaluated in terms of quality and fulfils the predetermined quality standards. When will I receive my certificate? For CPD accredited PDF certificate it will take 24 hours, however for the hardcopy CPD certificate takes 5-7 business days and for the Quality License Scheme certificate it will take 7-9 business days. Can I pay by invoice? Yes, you can pay via Invoice or Purchase Order, please contact us at info@lead-academy.org for invoice payment. Can I pay via instalment? Yes, you can pay via instalments at checkout. How to take online classes from home? Our platform provides easy and comfortable access for all learners; all you need is a stable internet connection and a device such as a laptop, desktop PC, tablet, or mobile phone. The learning site is accessible 24/7, allowing you to take the course at your own pace while relaxing in the privacy of your home or workplace. Does age matter in online learning? No, there is no age limit for online learning. Online learning is accessible to people of all ages and requires no age-specific criteria to pursue a course of interest. As opposed to degrees pursued at university, online courses are designed to break the barriers of age limitation that aim to limit the learner's ability to learn new things, diversify their skills, and expand their horizons. When I will get the login details for my course? After successfully purchasing the course, you will receive an email within 24 hours with the login details of your course. Kindly check your inbox, junk or spam folder, or you can contact our client success team via info@lead-academy.org

German Language Course Intermediate Level
Delivered Online On Demand
£25

Active Directory with Windows Server 2016

By Packt

Identity, Access, and Authentication with Microsoft AD and Identity with Windows Server 2016 (70-742) Exam Prep

Active Directory with Windows Server 2016
Delivered Online On Demand6 hours 19 minutes
£131.99
Show all 37

Search By Location