3752 Courses

Duration 4.125 Days 24.75 CPD hours This course is intended for The job roles best suited to the material in this course are: Individuals responsible for maintaining and improving the workplace safety, Occupational health and safety officers, consultants, and advisors, Professionals wishing to acquaint themselves with PECB's IMS2 Methodology for implementing an OH&S MS, Individuals responsible for maintaining the conformity of OH&S MS to ISO 45001 requirements, Members of OH&S teams, Individuals aspiring to pursue a career as OH&S MS implementers, consultants, or officers Overview Explain the fundamental concepts and principles of an occupational health and safety management system (OH&S MS) based on ISO 45001 Interpret the ISO 45001 requirements for an OH&S MS from the perspective of an implementer Initiate and plan the implementation of an OH&S MS based on ISO 45001, by utilizing PECB's IMS2 Methodology and other best practices Support an organization in operating, maintaining, and continually improving an OH&S MS based on ISO 45001 Prepare an organization to undergo a third-party certification audit This course is designed to equip you with the competence to establish, implement, manage, and maintain an occupational health and safety management system (OH&S MS) in accordance with ISO 45001:2018 requirements and guidance. This training course aims to provide an in-depth understanding of ISO 45001 requirements, as well as the best practices and approaches used for the implementation and subsequent maintenance of an OH&S MS. The ultimate ambition of this training course is to enable you to create the conditions for a safer workplace. Introduction to ISO 45001 and initiation of an OH&S MS implementation Training course objectives and structure Standards and regulatory frameworks Fundamental concepts and principles of OH&S Initiation of the OH&S MS implementation The organization and its context Implementation plan of an OH&S MS Leadership and worker participation OH&S MS scope OH&S policy and objectives Hazard identification and assessment of risks and opportunities Implementation of an OH&S MS Resource management Awareness and communication Documented information management Operations management Emergency preparedness and response OH&S MS performance evaluation, continual improvement, and preparation for the certification audit Monitoring, measurement, analysis, and evaluation Internal audit Management review Treatment of nonconformities and incidents Continual improvement Preparation for the certification audit Closing of the training course

This course covers all relevant legislation affecting safe working in the building, construction...

Site supervisor safety training scheme refresher (SSSTS-R)

This course provides a basic understanding of health & safety duties and responsibilities...

This course is designed to assist those on site who have responsibility for managing all forms of...

If your organisation manages contractors then your staff need to understand the health and safety issues. This course is the answer. The expert trainer will set out clearly the legal responsibilities of all relevant parties and explore the practical application of these responsibilities with the course participants. The course will then examine the issues associated with the planning of work to be contracted out and the evaluation, selection, control and monitoring of contractors engaged to undertake the work. Although the main focus is on health and safety, the course will also explain how health and safety issues need to be integrated into your organisation's functional management processes to ensure effective control of contractors. The course will consider all types of contracted activities, including construction and maintenance, cleaning, security, plant installation, etc. This programme will give participants: A clear understanding of the organisation's legal responsibilities for managing contractors The information they need to assess the competence of contractors A practical understanding of risk assessment principles and the transfer of risk to contractors A step-by-step guide to the key aspects of managing contractors in practice, covering:Planning of the workSelecting contractorsHandover prior to work commencementDuring the workReviewing the work on completion Practical guidance on the integration of health and safety controls into organisational procedures for contractor management 1 Introduction Who are contractors? Why manage contractors? Different types of contractors Costs of poor contractor performance 2 Overview of health and safety law and liability Health and safety law and statutory duties Relevance of civil and criminal law Enforcement and prosecution 3 Relevant legislation for controlling contractors Health and Safety at Work Act 1974 Management of Health and Safety at Work Regulations 1999 Construction (Design and Management) Regulations 1994 (as amended, 2007) Other relevant legislation Contract law 4 Managing contractors in practice Exercise - how well is it happening? The objectives Five step approachPlanning of the workSelecting contractorsHandover prior to work commencementDuring the workReviewing the work on completion 5 Planning the work Scope and extent Risk assessment Interface and other activities Who controls what? Contract arrangements 6 Selecting the right contractor(s) Locating contractor organisations Selection the right contractors Assessing contractor competence Approved lists/frameworks Tender process 7 Pre-work commencement Co-ordination and co-operation Exchange of information Contractor risk assessments and method statements Permits to work Case study exercise 8 During contract work Communication and liaison Supervision and inspection of the work Inspection and reporting procedures Security issues Facilities and access 9 Reviewing work on completion Why, what and how? Achieving continuous improvement in contractor performance 10 Questions, discussion and review

This course provides participants with a comprehensive understanding of the requirements of the CDM Regulations 2015 and how these should be implemented in practice. The Regulations are put in context with other key health and safety legislation. The programme sets out clearly the roles and responsibilities of the principal duty holders and explores with the participants how these roles may vary on different types of project and procurement routes. The programme examines the content and appropriate level of information that should be included in the Pre-Construction Information and the Construction Phase Plan. The trainer will discuss best practice in implementing CDM through the new 2015 Regulations and Guidance. This course is essential for anyone who is involved in the procurement, planning, design or implementation of construction work. The course will provide you with: An overview of construction health and safety law, liability and enforcement A detailed understanding of the 2015 CDM Regulations and the part they play with other key legislation An explanation of the roles and responsibilities of all duty holders and the requirements for the CDM documentation Clear advice on current best practice for complying with the principles of the CDM Regulations and the changes introduced by the 2015 Regulations An understanding of how risk assessment should be applied practically throughout the design and how this responsibility is then transferred to contractors 1 Introduction Why manage health and safety? The costs of accidents Construction industry statistics Why CDM? Health and safety culture in the construction industry 2 Overview of health and safety law and liabilities Criminal and civil law Liability Enforcement and prosecution Compliance - how far do we go? Statutory duties 3 Health and safety law in construction Framework of relevant legislation Health and Safety at Work etc Act 1974 Management of Health and Safety at Work Regulations 1999 Construction (Design and Management) Regulations 2015 Who is responsible for the risks created by construction work? Shared workplaces/shared responsibilities Control of contractors - importance of contract law 4 Construction (Design and Management) Regulations 2015 Scope - What is construction? Application - When do they apply? The CDM Management System Duty holders (Client, Domestic Client, Designer, Principal Designer, Principal Contractor, Contractor) Documents (HSE Notification, Pre-Construction Information, Construction Phase Health & Safety Plan, H&S File) Management process The 2015 Guidance 5 Best practice - key issues in the CDM process The client and client management arrangements Competence and resource under CDM 2015 The role of the Principal Designer in practice Design risk assessment and the role of the Designer The CDM Documents (PCI, PCI Pack, Plan and File) Construction health, safety and welfare Making CDM work in practice 6 Questions, discussion and review

This course provides participants with a comprehensive understanding of the requirements of the CDM Regulations 2015 and how these should be implemented in practice. The Regulations are put in context with other key health and safety legislation. The programme sets out clearly the roles and responsibilities of the principal duty holders and explores with the participants how these roles may vary on different types of project and procurement routes. The programme examines the content and appropriate level of information that should be included in the Pre-Construction Information and the Construction Phase Plan. The trainer will discuss best practice in implementing CDM through the new 2015 Regulations and Guidance. This course is essential for anyone who is involved in the procurement, planning, design or implementation of construction work. The course will provide you with: An overview of construction health and safety law, liability and enforcement A detailed understanding of the 2015 CDM Regulations and the part they play with other key legislation An explanation of the roles and responsibilities of all duty holders and the requirements for the CDM documentation Clear advice on current best practice for complying with the principles of the CDM Regulations and the changes introduced by the 2015 Regulations An understanding of how risk assessment should be applied practically throughout the design and how this responsibility is then transferred to contractors 1 Introduction Why manage health and safety? The costs of accidents Construction industry statistics Why CDM? Health and safety culture in the construction industry 2 Overview of health and safety law and liabilities Criminal and civil law Liability Enforcement and prosecution Compliance - how far do we go? Statutory duties 3 Health and safety law in construction Framework of relevant legislation Health and Safety at Work etc Act 1974 Management of Health and Safety at Work Regulations 1999 Construction (Design and Management) Regulations 2015 Who is responsible for the risks created by construction work? Shared workplaces/shared responsibilities Control of contractors - importance of contract law 4 Construction (Design and Management) Regulations 2015 Scope - What is construction? Application - When do they apply? The CDM Management System Duty holders (Client, Domestic Client, Designer, Principal Designer, Principal Contractor, Contractor) Documents (HSE Notification, Pre-Construction Information, Construction Phase Health & Safety Plan, H&S File) Management process The 2015 Guidance 5 Best practice - key issues in the CDM process The client and client management arrangements Competence and resource under CDM 2015 The role of the Principal Designer in practice Design risk assessment and the role of the Designer The CDM Documents (PCI, PCI Pack, Plan and File) Construction health, safety and welfare Making CDM work in practice 6 Questions, discussion and review

The aim of the course is to ensure that safety requirements are appreciated by managers. To enable them to review their own safety systems. It give’s the ability to introduce new controls and possibly implement changes as appropriate to ensure safety in the workplace. Who Should Attend? The course is designed for managers and supervisors in any sector, who are required to manage health and safety risk and resources within their organisation. It is also beneficial for anybody wishing to get into the Health and Safety profession or Management. The IOSH qualification is an impressive qualification to add to a CV. Course Duration: 3 days. Learning Objectives: On successful completion of the course, delegates should be able to: Explain ‘managing safely’. Explain the component parts of a recognised safety management system such as HSG65. Identify the data and techniques required to produce an adequate record of an incident. To demonstrate the procedure for an accident investigation, recognising the human factors involved. Describe statutory requirements for reporting and procedures for checking non-reporting. Describe methods of basic trend analysis for reactive monitoring data. Define ‘hazard’ and ‘risk’, and describe the legal requirements for risk assessment. Demonstrate a practical understanding of risk assessment technique and the data required for records. Describe workplace precaution hierarchies. Prepare and use active monitoring checklists. To implement schedules for active monitoring, recording results and analysing records. Outline the main provisions of the Health and Safety at Work etc Act and the Management of Health and Safety at Work Regulations. Outline relevant health and safety legislation, codes of practice, guidance notes and information sources such as the HSE. Syllabus: 1. Module 1 – Introduction and Overview. 2. Module 2 – Risk Assessment. 3. Module 3 – Risk Control. 4. Module 4 – Health and Safety Legislation. 5. Module 5 – Common Hazards. 6. Module 6 – Investigating Accidents and Incidents. 7. Module 7 – Measuring Performance. What do IOSH Managing Safely Courses involve? The course has seven comprehensive modules. These modules cover risk assessment and control, Health and Safety Legislation, common hazards, accident and incident investigation. Also covered is performance measurement. Effectively covering all aspects of safety management in the workplace. To obtain the IOSH Managing Safely certificate, attendees will need to complete a four day course. The course is delivered using high quality animated graphics. This includes sophisticated, fun presentations to make the content of the course more memorable. With training tools including board games, DVDs and quizzes displaying clear scenarios and essential practical content. We have worked hard to ensure that taking an IOSH Managing Safely course is as enjoyable as possible. Attendees will officially attain their IOSH Managing Safely certificate upon successful completion of both the written and practical assessments of the course. Certification: An IOSH Managing Safely certificate is awarded to all those who attend the course successfully completing both written and practical assessments. Candidates will also receive an excellent workbook from IOSH, with all the tools to help them once they are back in the workplace. Understanding of the course material is evaluated by means of a 45-minute written assessment paper consisting of 20 multi-format questions. There is also a practical assessment. MHA Training was established in 2008 based at our training centre in Warrington, Cheshire. We provide an array of services On-Site also for clients around the North West in areas such as Manchester, Liverpool, Widnes, St Helens, Runcorn, Wigan, Preston and Leeds. Over the years we have expanded and have instructors available for all of our courses Nationwide. IOSH Managing Safely Refresher Course: Recently IOSH have introduced a one day refresher course. This enables candidates having previously sat a course within 3 years to keep their qualification current and upto date in just a one day course. For more information please see the factsheet below.

The learning objectives that we believe you require to be covered within the training include: A detailed understanding of the CDM 2015 Regulations and how they should work in practice An understanding of the key roles (Designer, Principal designer, contractor, principal contractor and client) under CDM 2015 What constitutes design and when you may be acting as a designer The requirements for notification Pre construction information, the construction phase plan and the H&S file An opportunity for delegates to ask questions and gain clarification on specific project requirements 1 Introduction Why manage health and safety? The costs of accidents Construction industry statistics Why CDM 2015? 2 Overview of health and safety law and liabilities Criminal and civil law Liability Enforcement and prosecution Compliance - how far do we go? Statutory duties 3 Health and safety law in construction - the current framework Framework of relevant legislationHealth and Safety at Work etc Act 1974Management of Health and Safety at Work Regulations 1999Construction (Design and Management) Regulations 2015Work at Height Regulations 2005 Who is responsible for the risks created by construction work? Shared workplaces/shared responsibilities Control of contractors - importance of contract law 4 CDM 2015 - the principles and current best practice Scope - what is construction? Application - when do the Regulations apply? The CDM management systemDutyholders (client, designer, principal designer, principal contractor, contractor)Documents (pre construction information, Notification, construction phase Plan, H&S File)Management process The 2015 HSE guidance / industry best practice Clarification of roles and responsibilities 5 Competence under CDM 2015 What is 'Competence'? The criteria to be used in construction Achieving continuous improvement 6 Part 4 Construction Health Safety and Welfare Overview of Part 4 Responsibilities Welfare arrangements 7 Risk assessment and the role of the designer Principles of risk assessment Loss prevention / hazard management What is a suitable risk assessment?Design v construction risk assessmentThe client is a designer?Whose risk is it? 8 Risk assessment exercise Understanding the principles of design risk assessment Identifying hazards under the control of clients and designers Quantifying the risk 9 Questions, discussion and review