590 Courses

HCAs, Care certificate, patient hygiene. fluids, nutrition, mental, health, learning disabilities, dementia, manual handling, safe

Highfield Level 1 Award In Health And Safety Within A Construction Environment (RQF) Highfield Level 1 Award in Health and Safety within a Construction Environment (RQF) One day course For those applying for the Green Labourer CSCS Card Includes the Health, Safety, Environment Test For Operatives and Specialists book or DVD by CITB! Face to Face: One day course + time for self-study required This course is supported by the Construction Industry Training Board (CITB) This course is designed to give learners a route to applying for the Green Labourer CSCS Card Course Contents: The purpose of a risk assessment The purpose of a method statement The legal requirements of risk assessments and method statements The common causes of work-related fatalities and injuries The implications of not preventing accidents and ill-health at work Health and safety definitions Hazards and potential risks of a a range of situations The importance of reporting accidents and near misses Accident reporting procedures Risk assessments and dynamic risk assessments The reasons for using safe manual handling in the workplace The employees' responsibilities under current legislation and official guidance in relation to manual handling in the workplace The procedures for safe manual handling Working at height Employees' legal responsibilities in relation to working at height Potential hazards when working at height Controlling risks and hazards while working at height Regulations regarding working at height COSHH: substances hazardous to health Common risks to health within a construction environment Drugs and alcohol Personal Hygiene Asbestos PPE (Personal Protective Equipment) Working around plant and equipment safely Benefits of this course: In 2018/19, 1.4 million people suffered from a work-related illness They have a much higher rate of work-related ill-health than those working in many other industries Construction workers have the highest rate of musculoskeletal disorders compared to other occupations This course develops learners’ knowledge and understanding of health and safety in a construction environment so they can work safely on a construction site Those who successfully complete this Level 1 Award in Health and Safety in a Construction Environment and have completed the CITB Health, Safety & Environment Test within the last 2 years can then apply for a Green Labourer CSCS card. Our Health And Safety In A Construction Environment Training Course is a nationally recognised, Ofqual regulated qualification accredited by Highfields Qualifications.This course leads to the obtainment of the CSCS labour card, allowing workers to work on construction sites.The Ofqual Register number for this course is 603/2442/9

This manual handling course is for businesses who have workers who are exposed to the dangers of manual handling. This course will fulfil requirements set out by the HSE to train staff on how to correctly handle items whilst lifting, pushing and pulling.

Gain certification as a safe people handling instructor and assessor with our comprehensive course. Equip yourself with the necessary skills and knowledge to effectively train and assess others in safe manual handling techniques.

NPORS Manual Handling (N704)

Trainer to Candidate Ratio: Working at Height Theory: 12 Students to 1 instructor; Practical: 6 Students to 1 instructor Frist Aid Theory: 12 Students to 1 instructor; Practical: 6 Students to 1 instructor Manual Handling Theory: 12 Students to 1 instructor; Practical: 12 Students to 1 instructor Fire Awareness: Theory: 12 Students to 1 instructor; Practical: 6 Students to 1 instructor Sea Survival: Theory: 12 Students to 1 instructor; Practical: 6 Students to 1 instructor Enhanced First Aid: Theory: 12 Students to 1 instructor; Practical: 6 Students to 1 instructor Advanced Rescue Training: Theory: 12 Students to 1 instructor; Practical: 4 Students to 1 instructor

The aim of this module is to enable delegates to perform entry-type injured person rescue operations, in a Wind Turbine Generator, using industry standard rescue equipment, rescue methods and techniques, exceeding those of GWO Working at Heights. Valid GWO BST Module Working at Heights, GWO First aid and GWO Manual Handling certificates are prerequisites for participation.

The delegates are able to demonstrate: The participants are able to demonstrate knowledge of hazards and risks associated with working at height specific to a wind turbine generator (WTG) (L2 – Knowledge) The participants are able to demonstrate understanding of current national and regional legislation regarding working at height (L2 – Knowledge) The participants are able to demonstrate correct identification of PPE, including identification of Global and regional standard markings e.g. harness, hard hat, lanyards, etc. (L3 – Skills) The participants are able to demonstrate the knowledge and skills to correctly perform pre-use inspection, service, store and correctly fit relevant PPE, e.g. harness, fall arrest lanyards, guided type fall arrest lanyards and work positioning lanyards (L2 – Knowledge & L3 – Skills) The participants are able to demonstrate correct use of the relevant PPE, e.g. harnesses fall arrest lanyards, guided type fall arresters and work positioning lanyards. This includes correct identification of anchor points and correct conduct on ladder (L3 – Skills) The participants are able to demonstrate correct use of evacuation devices (L3 – Skills) The participants are able to demonstrate how to approach rescue situations in WTGs and use rescue equipment efficiently (L3 – Skills & Ability)

Launch your Detailing Career Combining two of our syllabus levels into a 5-day period, this course has been specially created to accommodate those travelling from further afield, and international detailer training. UK Detailing Academy's recommended syllabus path remains that structured learning over a longer period remains the most effective way to deliver vocational education. It's the reason we disagree with supposed one-week 'master detailer' courses in principle, there's just too much information in a short space of time. However, we recognise that, for some, the logistical challenges can be both burdensome and financially off-putting. With that in mind, we have taken the decision to introduce an allowance to book Levels One and Two of our detailer syllabus back to back for those travelling long distances to attend. Attendees will still need to complete the coursework and take the online exams for both levels in order to achieve our certification. For more information on the syllabus of both courses, please read through the full course description below. Notes: Mondays are the only start day available online as this is a 5-day course. If you need to start on another day due to travel and run over into the following week, please contact us to discuss. To book this course using Paypal Credit, please contact the office as it exceeds the advertised maximum payment limit, which we can then negotiate. Combining two of our syllabus levels into a 5-day period, this course has been specially listed to accommodate those travelling from further afield and international detailer training. UK Detailing Academy's recommended syllabus path remains that structured learning over a longer period remains the most effective way to deliver vocational education. It's the reason we disagree with supposed 5-day 'master detailer' courses in principle. However, we recognise that for some the logistical challenges can be both burdensome and financially off-putting. With that in mind, we have taken the decision to introduce an allowance to book Levels One and Two of our detailer syllabus back to back for those travelling long distances to attend. Attendees will still need to complete the coursework and take the online exams for both levels in order to achieve our certification.   The aim of Level One is ideal for those just about to, or have recently entered the detailing industry, or those who wish to reset and refresh their skills. the aim is to familiarise the candidate with the processes and maintenance of vehicles from a professional and business view, teaching the foundations of correct vehicle cleaning up to the final familiarisation of entry-level dual action machine polishers. Business practices and health and safety are explored covering areas such as pricing, marketing, SDS and environmental conformity. Along the way topics covered will be: Washing stages Wash media Environmental considerations Drying methods Bonded contamination and its removal Wheel care and maintenance Glass and hard surfaces Engine bay cleaning Vulnerable surfaces Efficiency and process PPE and safety Clothing and working practices Risk assessment Chemical knowledge Van set-ups Interior detailing Leather and soft surface care Fillers/glazing Dual action machine polishers intro Minor defect identification Paint types LSPs Final presentation Marketing Conflict resolution and customer care Financing Insurance Pricing and quotes Business Administration Memberships Social Media Manual handling Safe working practices Pre-work inspection Level 2 Following your introduction skills learnt in Level One you will be progressing onto more advanced machine polishing and cleaning techniques. Machines introduced at this level include forced rotation dual action polishers, every inception of Dual action polishers, both in throw and size. We'll also look at pad types, heavy cutting options and defect identification to assess what can be rectified and how. Interiors are explored in greater depth with higher yield services with dry steam cleaning, odour removal, leather protection and treatment, and stain removal with the associated chemistry. • Pad types • Compound grades • Rubber and plastic protection • Coatings after-care • Polymer and PTFE exterior LSPs • Glass sealants • Troubleshooting • Accreditations • Financial management • Insurance • Marketing • Pricing • Spot Sanding • Targeting your customer base • Safe working practice • Workshop planning • Intermediate chemical knowledge • Efficiency and time management • Matt finishes • Environmental considerations • Advanced cleaner chemistry • Bonded overspray and concrete • LSPs • Engine bay detailing • Plastic trim restoration • Odour removal • Steam cleaning • Stain removal & chemical principles • Fabric and leather protection • Paint types and their principles • Long and short throw DA machines • Forced action machines • Lighting • Defect identification All levels are accompanied by a full course booklet to revisit topics covered when needed. Practical assessment takes place as part of the original training session, at the end of the course you will be assigned a (manageable) series of case studies and exercises to complete over the period of 3 months to cement the knowledge. There is then an externally assessed online exam, to ensure there are no weaker/problem areas and to assess the candidate's knowledge. After which the Level One and Two accreditations are awarded and you can either progress or choose to practice the skills gained with ongoing support. We would again stress that, if able to attend both courses separately, candidates are likely to better retain the information delivered. However, if logistics are a challenge, then this is the ideal course to get your detailing career started.   Course Length 3 Days (0930 - 1600) Group Size One-to-One Location UK Detailing Academy, 2 Purlieus Barn, Ewen, Cirencester, GL7 6BY Experience / Qualification Open to all Refreshments or Lunch Refreshments included

QA Level 2 Award In Health And Safety In The Workplace (RQF) Health and Safety Training Courses QA Level 2 Award In Health And Safety In The Workplace (RQF) Free CPD! Book an Ofqual Regulated course with us, and receive a FREE CPD accredited training course! Course Contents: Roles and responsibilities of employers and employees Health and safety laws Risk assessments and risk control hierarchy Identifying and controlling risks from common workplace hazards, including:Slips, Trips and FallsManual HandlingFireWorking from HeightElectricityHazardous SubstancesWorkplace conditionsErgonomicsEquipmentNoise and vibrationTransport and vehiclesViolenceSmoking, alcohol and drugsStress Procedures for responding to accidents and incidents Recording incidents, accidents and ill health Benefits of this course: In 2018/19, 1.4 million people suffered from a work-related illness 581,000 sustained an injury 147 People lost their lives The estimated cost of injuries and ill health last year was £15 billion 28.2 million working days, or 108,045 working years, were lost due to work-related illnesses and injuries It is an employer's duty to protect the health, safety and welfare of their employees and other people who might be affected by their business. This includes providing sufficient information, instruction and training of employees, so they can work in a way that does not put themselves or others at risk This QA Level 2 Award in Health and Safety in the Workplace (RQF) course helps employees gain an understanding of health and safety issues and their own role within that Accredited, Ofqual regulated qualification: This Health and Safety Training Course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards.This means that you can be rest assured that your Health and Safety Certificate fulfils the legal requirements and is an excellent way to make sure you and your employees are trained in Health and Safety.The Ofqual Register number for this course is 603/2687/6