Cademy logoCademy Marketplace
  • Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

23 Educators providing Courses

alterations
Ermysted's Grammar School

ermysted's grammar school

Skipton

Ermysted’s is an ancient grammar school, founded over 500 years ago. It was long believed to be William Ermysted who founded the school some time before his death in 1558 but research in 1948 revealed an earlier history, dating back to at least 1492 and possibly earlier to 1468. So William Ermysted was in fact the school’s second benefactor, the original founder being Peter Toller. Peter Toller Some time before his death in 1492, Peter Toller, who was then rector of Linton-in-Craven and Dean of Craven, founded in Skipton Parish Church the Chantry of Saint Nicholas, to which he attached a Free Grammar School to educate the children of the town. In 1492 according to his will, the Chantry School received all his lands and tenements in Skipton, Addingham, Eastby, Draughton and Hellifield, together with a sum of money to pay for ornaments and repairs. When Henry VIII initiated his reformation of the church, the Chantry of Saint Nicholas was dissolved and its lands appropriated by the Crown, although the revenues of the school were continued. William Ermysted William Ermysted had been a prominent figure in Henry VIII’s London, as Canon of St Paul’s, “clerk of the King’s Chancery” and Master of the Temple. On the 1st of September 1548 William Ermysted’s re-foundation deeds for the Chantry School were executed and on 12th December 1551 the deeds were enrolled on the Close Rolls. Essentially these documents recorded the lands which he wished to present to the School in order that it be supported in the future and also advised a system of management, with a teaching regime according to the majority of classically based grammar schools of the time. William also endowed the school with the Chapel of St. James, late of the Knights Hospitaler of St. John, purchased from Henry, Earl of Cumberland in which to house it. The building survives to this day at the bottom of Shortbank Road and current houses an electricity substation. William and Sylvester Petyt Between their respective births in 1637 and 1640, and their deaths in 1707 and 1719 William and Sylvester Petyt both played important roles in the development of the school. On his death in 1707 William Petyt bequeathed a sum of £200 towards the maintenance of Scholars of Christ’s College, Cambridge for those students who had previously been Scholars of the Free Grammar School of Skipton-in-Craven. In addition he gave £50 to the School, which was subsequently used to purchase books for poor scholars. When William’s brother Sylvester, also a former Scholar of Ermysted’s, died in 1719 he left to the School the huge sum of £30,000 to form the Petyt Trust. This still provides for various educational functions, including some Speech Day prizes, although the bulk of the capital was used in the nineteenth century to endow Skipton Girls’ High School. Sylvester also delivered to Skipton the Petyt Library comprising of books from his own collection as well as from those of his brother and friends. Edward Hartley The legacy of the School’s founding fathers and benefactors survives in the three School Houses of Toller, Ermysted and Petyt but the fourth House, Hartley, takes its name from the School’s Headmaster during the period 1876 to 1907. Under Edward Thomson Hartley, Ermysted’s moved from the Chapel bequeathed to it by Ermysted to its present Gargrave Road site. Originally thirteen boys made the move in 1877, but under Hartley’s dynamic leadership the School flourished and added to the original School House the Gym and Pool, the Science Department, Staff Study, and the Craft Workshops. Ermysted’s in the 20th Century In 1913 £1,000 was given by friends of the School to improve the Playing Field, and in 1920 the School Library was built, funded by Old Boys, as a memorial to those Scholars who fell during the Great War. In 1946 an appeal was made to provide a worthy memorial to the Old Boys of Ermysted’s who lost their lives in the Second World War. Numerous Old Boys, Governors, pupils, parents, members of the Staff and other valued friends of the School generously contributed upwards of £17,000 towards the cost of the Memorial Hall, the Organ and the alterations to Big School, the Coulthurst Trust paying for the Organ outright when the Hall was opened in 1959. Throughout its history it has been an all boys’ school and only relatively recently, in 1989, was the boarding house closed. Quincentenary Celebrations In 1992 Ermysted’s celebrated 500 years of excellence, in commemoration of the Quincentenary of the death of the Chantry School’ founder, Peter Toller. The year’s celebrations were marked by a visit from the Princess Royal on the 1 June. To commemorate the Quincentenary a Sports Hall was erected between the School and cricket pitch, opened on Speech Day 1994 by Sir Peter Yarranton, Chairman of the Sports Council. £350,000 was raised toward the cost of this venture through the generosity of pupils, teachers, parents, Old Boys, Governors and friends of the School, with the balance met from Foundation Funds. Founders’ Day is held annually in the Autumn Term with a service held in Holy Trinity Church in Skipton commemorating the foundation of the School over five hundred years ago. Building Developments In 2001, the School was successful in a bid to the DfE to provide new CDT facilities and additional classrooms (designated for the English Department). Aided by additional finance available to Voluntary Aided schools, together with a generous donation from the Wolfson Foundation, the former CDT facilities were turned into two additional science laboratories. At the same time, four of the present six science laboratories underwent considerable refurbishment.

Message
Crossbill Distillery

crossbill distillery

Glasgow,

The site has been developed for and published by Crossbill Distilling Ltd, with it’s registered office located at Caledonian House, Seaward Street, Glasgow, G41 1HJ, with the company registration number SC473332 and VAT number 193 8565 59 (hereinafter the ‘Company’ or ‘we’). ACCESS TO THE SITE To access this site, you must be of legal drinking age in your country of residence (if no such laws exist in your country, you must be over 21 to visit our site) and be aware of how to consume alcohol responsibly. COPYRIGHT AND INTELLECTUAL PROPERTY All of the trade marks and logos displayed on this site (the ‘Trade Marks’) are registered and unregistered trade marks of Crossbill Distilling Ltd, or are trade marks and logos which Crossbill Distilling Ltd has been authorised to use and/or display on its website. Unauthorised use of any of the trade marks and logos appearing on this website is not permitted. On an exception basis, we may expressly authorise to reproduce and/or represent all or part of our site, on certain media. On this regard, any request for authorisation must be submitted in advance to the following email address: info@crossbillgin.com. LIABILITY/ WARRANTY Crossbill Distilling Ltd aims to ensure that the content on this website is correct but cannot give any warranty as to the websites accuracy or completeness and therefore cannot accept responsibility for any damage or loss resulting in your use or interpretation of the website content. THIRD PARTY SITES Crossbill Distilling Ltd has no control of third-party sites linked to this site and does not accept any responsibility for the content found on these sites. You should refer separately to the terms and conditions found on any third-party site. INFORMATION ON THE PRODUCTS AND SERVICES Unless provided otherwise, the products and services which are presented to you do not constitute a sale offer but a general presentation of the range of products and services that we distribute in the country in which this site is published. THE ONLINE SHOP – Gin Sales Bottle prices shown on this website are in British Pounds, inclusive of UK duty and VAT (Value Added Tax) and exclude delivery costs. No goods are offered for sale at this site to any person who is below the legal drinking age in the country in which they are resident or any person resident in a country where such sale would be contrary to local law. By placing an order through our site, you warrant that you are of a lawful age. If you are buying products as a gift, the recipient must also be of a lawful age. This is the responsibility of the purchaser. If our couriers are in any doubt about the age of the recipient on delivery, they may request some form of ID. After placing an order, you will receive an e-mail from us acknowledging that we have received your order. Please note that this does not mean that your order has been accepted. Your order constitutes an offer to us to buy a product. All orders are subject to acceptance by us, and we will confirm such acceptance to you by sending you an e-mail that confirms that the product has been despatched. The contract between us will only be formed when we send you the Despatch Confirmation. The Contract will relate only to those products whose despatch we have confirmed in the Despatch Confirmation. We will not be obliged to supply any other Products which may have been part of your order until the despatch of such Products has been confirmed in a separate Despatch Confirmation. We despatch orders Monday to Friday and all orders received before 1pm are despatched the same day. Orders received after 1pm are despatched the next working day. Our Shipping information, including costs, can be found in the SHIPPING section of the site. Delivery of our products will be made to the address provided by you at the time of placing your order. Our customers’ satisfaction is of the utmost importance to us, and we take exceptional care in the manufacturing, packaging and delivery of our products. Customers should promptly inspect goods delivered to them to satisfy themselves that any goods delivered to them are as expected. Please note that you may be asked to show proof of age upon delivery of your order. RETURNS The courier must be informed of breakages or shortages at the time of delivery. We may not (at our sole discretion) accept any claims for breakages or shortages unless they are stated on the couriers documentation. We must have confirmation of these breakages or shortages within 48 hours of delivery. Photographic evidence is required by our carrier company if an item has been damaged during transit. To request a full refund or exchange, please notify us by email to info@crossbillgin.com within 48 hours of delivery. Please state whether you would like a full refund or exchange and quote your order confirmation number, the product name, a photo of the damage, your full name, email address, phone number and delivery address. Only unopened products that are in the original packaging will be eligible for refund or exchange. Approved refunds will be credited to the payment card/PayPal account used during the original transaction within 30 days and will exclude shipping costs. We recommend that items are returned to us via a recorded delivery service to ensure that they are protected and insured during transit. If you fail to meet these terms and conditions, the product will be returned to you and you will not receive a refund nor be eligible for an exchange. DISCLAIMER All products are stress tested before despatch. Products are sensitive to elements of extreme heat where glass and corks may fail. Products should be stored at room temperature and out of direct sunlight. All coloured products use natural ingredients and may fade or change overtime. THE ONLINE SHOP - Gin School Purchasing Options explained TO BUY A TICKET AND BOOK A DATE. This option should be used if you know the date you wish to book at the same time as purchasing a ticket. By following the link, you will be taken to the booking screen where you will choose the date then will be directed to complete your information then onto making a payment. TO REDEEM A GIFT VOUCHER AND BOOK A DATE. This option should be used if you have previously purchased or been gifted a voucher. By following the link, you will be taken to the booking screen where you will choose the date then will be directed to complete your information and redeem your voucher using the order number on the voucher. TO BUY A GIFT VOUCHER TO BE REDEEMED LATER. If you do not know the date you would like to book or if you wish to purchase a voucher to be given as a gift, you should ADD TO CART. This will then bypass the booking screen and will direct you to the checkout screen where you will complete your information then onto making a payment. By purchasing or booking a course you are agreeing to the following terms and conditions. Voucher Delivery – When purchasing a Gin School Experience, an e-voucher will be generated and sent to the provided email address within 24 hours. You will also receive a Gift Voucher by post. Refund Policy – The Gin School operates a strict 14-day refund policy from the date of purchase. Notification must be made in writing to info@crossbillgin.com and must be accompanied by the unused voucher and proof of payment. Cancellations and Postponements – A minimum of 14 days’ notice is required prior to your appointment to reschedule a booking and will incur a £10.00 administration fee. In the unlikely event that the Company has to cancel a Gin School Masterclass, the Company undertakes to offer a suitable alternative date or a full refund of any course fees. Vouchers – Vouchers cannot be exchanged for cash or other goods. Vouchers are transferable, so if you are unable to attend yourself, you may nominate a replacement. Vouchers expire 12 months from the date of issue and extensions beyond 12 months are not available under any circumstances. Course Alterations –The Company reserves the right to make minor changes to the format and content of the Gin School Masterclasses, to improve the experience, without notice. Age Restriction – You must be over 21 years of age to attend a Masterclass and those that appear under 25 years will be asked for proof of age upon arrival. Samples – A limited quantity of tasting samples will be offered during the Gin School Masterclass and are included in the cost of the voucher. Health and Safety Liability – You will be given a briefing on health and safety prior to the session commencing. All participants are expected to listen carefully and follow instructions given. Participants should take reasonable care in the Gin School to avoid personal injury and/or injury to others. Standard of Behaviour – We will refuse to admit you to the premises if you appear to be intoxicated or under the influence of prohibited narcotic substances upon your arrival. You are expected to behave sensibly and appropriately at all times and may be required to leave the premises if for any reason the Company or others are unhappy with your behaviour. We reserve the right to refuse the sampling of alcohol under the terms of the licensing act Washroom Facilities – The primary function of the premises is a distillery and the site offers limited toilet facilities with restricted access. Alternative toilet facilities with full disabled access are however available across the covered courtyard. Special Needs – Your comfort and wellbeing are of the utmost importance to us, please therefore inform us prior to our accepting the booking of any medical condition or physical impediment about which we would need to be aware in order to eliminate or anticipate any potential health and safety issue Special Dietary Requirements/ Allergies/ Disabilities – We cannot adjust courses for special dietary requirements unless previously agreed. If you have any allergies, please contact us in advance to discuss your requirements. There may be traces of nuts or other ingredients and if you have an allergy you attend at your own risk. If you have a disability or condition you think may hinder your enjoyment of the course, please let us know so we can help to ensure your day runs smoothly.

Message
Moderntronics

moderntronics

Harrow,

In these terms and conditions (“Conditions”) the following expressions shall have the following meanings: “Business Day” means any day other than Saturday, Sunday or a public holiday. “Business Hours” means the hours detailed in Condition 32 below. “Contact Hours” means Monday to Friday (inclusive) from 07:00 hours to 17:00 hours but excluding bank holidays. “Contract” means any contract between MT and the Customer for the supply of Hardware and/or Software (with the associated Licence) and/or services which is subject to these Conditions. “Customer” means any person, firm or company who enters into a Contract with MT to which these Conditions apply. “Force Majeure” means any event outside the reasonable control of either Party affecting its ability to perform any of its obligations (other than as to payment) under these Conditions. “Goods” means all or any tangible or intangible goods or intellectual property including but not limited to Hardware and Software which are provided to a Customer in accordance with these Conditions. “Hardware” means any hardware provided by MT to the Customer. “MT” means MODERNTRONICS Ltd. or its servants and agents as the case may be. “Insolvency Event” means any one of the following in relation to the Customer: (i) a notice being issued to propose a resolution for winding up or dissolution, or such a resolution being passed; (ii) a petition for a winding up or an administration or bankruptcy order being presented, or such an order made; (iii)any steps being taken with a view to a voluntary arrangement or other assignment, composition or arrangement with all or any creditors or any moratorium, readjustment, rescheduling, forgiveness or deferral of all or any indebtedness; (iv) suspension of payments to all or any creditors and/or ceasing business; (v)an encumbrancer taking possession of all or any assets; (vi) an administrator or receiver being appointed over the Customer or all or any of its assets; (vii)any action anywhere similar or analogous to any of the foregoing; or MT reasonably believing that any of the foregoing is imminent. “Licence” has the meaning attributed to it in Condition 23 below. “Minimum Term” means the term set out in Condition 17 below. “Party” means MT or the Customer and “Parties” means both of them. “Response Time” means two Working Hours from an initial call to the hotline under Condition 26 or 28 below. “Seminar” means any seminar provided by MT. “Service Operator” has the meaning given to that term in Condition 28 below. “Site” means https://www.moderntronics.com and all subdomains including (but without limitation) “Software” means software or software updates or upgrades provided by MT and licensed to the Customer under Condition 23 below. “Training Sessions” means any training session provided by MT. “Working Hours” means the hours between 9:00 to 17:00 on any Business Day 2. Interpretation In these Conditions, the following rules apply: A person includes a natural person, corporate or unincorporated body (whether or not having separate legal personality). A reference to a Party includes its personal representatives, successors or permitted assigns. A reference to a statute or statutory provision is a reference to such statute or provision as amended or re-enacted. A reference to a statute or statutory provision includes any subordinate legislation made under that statute or statutory provision, as amended or re-enacted. Any phrase introduced by the terms including, include, in particular or any similar expression shall be construed as illustrative and shall not limit the sense of the words preceding those terms. A reference to writing or written includes faxes and e-mails. 3. General Information These Conditions apply when MT: sells and delivers Hardware; sells and delivers Licences; sells and delivers Software; or provides repairs or any other services to the Customer. They will also apply to other business transactions unless MT agrees that alternative special conditions apply. These Conditions apply to the exclusion of any other conditions that may be proposed by a Customer or implied by law (insofar as such exclusion is lawful). Part II Specific Provisions for the Use of the Online Shop Customers purchasing Goods from the Site, must read all Parts of these Conditions, which apply to them in full. 4. Consumers The Goods and services provided by MT are designed only for sale to and use by businesses in the course of their business activities. MT does not knowingly sell to any person dealing as a consumer or supply anything for personal use. 5. Customer’s Status By placing an order on the Site, the Customer warrants that he or she is: legally capable of entering into binding contracts and, where the Customer is an individual, that he or she is at least 18 years old; and is dealing in a business capacity and purchasing Goods and/or services for the purpose of his business and not for personal use. Part III General Conditions for the Provision of Goods and Services 6. Formation of Contract Quotations provided by MT to the Customer are not binding on MT. The Customer’s order constitutes an offer to MT to buy the Goods or services. All orders are subject to acceptance by MT. The offer will be deemed accepted, and a Contract formed, when MT sends the Customer confirmation that the Goods have been dispatched (“Dispatch Confirmation”) or, in the absence of a Dispatch Confirmation, when the Goods are delivered. The Contract will only relate to those Goods whose dispatch is confirmed to the Customer by a Dispatch Confirmation or if no Dispatch Confirmation is sent, those Goods which are actually dispatched. MT is not obliged to supply any Goods which may have been part of the Customer’s order until the dispatch of such Goods has been confirmed in a separate Dispatch Confirmation. Subject to Condition 17 below, an order for services will be deemed to have been accepted, and a Contract formed, when MT sends the Customer confirmation that the services ordered will be provided (“Service Confirmation”) or, in the absence of a Service Confirmation, when the services begin to be provided. Oral representations will only be binding upon MT if they are expressly confirmed in writing by MT to the Customer. 7. Price Unless MT expressly specifies prices to the Customer, MT’s current list of prices applicable at the time of the acknowledgement of order will apply. Unless otherwise agreed in writing, all prices are exclusive of value added tax, postage, freight, insurance, forwarding fees, installation and commissioning, travelling expenses and subsistence, which will be added as appropriate. MT will charge overtime for work outside of their normal Business Hours at up to 150% of the hourly rate from time to time applicable during Business Hours. Subject to Condition 16 below, prices are liable to change at any time, but changes will not affect orders in respect of which MT has already sent the Customer a Dispatch Confirmation or a Service Confirmation as the case may be. The Site contains a large number of products and it is always possible that, despite MT’s efforts, some of the products listed may be incorrectly priced. MT will normally verify prices as part of dispatch procedures so that, where a product’s correct price is less than our stated price, MT will charge the lower amount when dispatching the product to you. If a product’s correct price is higher than the price stated on our site, MT will normally, at our discretion, either contact you for instructions before dispatching the product, or reject your order and notify you of such rejection. MT is under no obligation to provide any Goods or services to the Customer at an incorrect (lower) price, even after MT has sent a Dispatch Confirmation or a Service Confirmation in relation to those Goods or services if such incorrect price could reasonably have been expected to be recognised by the Customer as an error. 8. Delivery and Availability The Customer’s order for Goods will be fulfilled by the delivery date in the Dispatch Confirmation or, if no delivery date is specified, then within 30 days of the date the Customer made his order (where such an order leads to a Contract). The period for delivery or performance of the Contract will normally commence on MT’s acknowledgement of the order. However, if the Customer is required to do anything before MT can effect delivery, MT will, as soon as practicable, notify the Customer accordingly. The time within which MT must deliver any Goods will run from the date on which MT receives notice from the Customer that it has duly complied with such notification from MT. Unless otherwise agreed in writing, any periods mentioned in the acknowledgement of order for services and Software development are based on a preliminary estimate of the required workload and therefore are approximate only. Time of delivery and performance is not of the essence. If MT fails to meet any delivery or performance dates set out in the acknowledgement of order and is solely responsible for such failure, the Customer may terminate the Contract but only after MT has been given an opportunity to rectify the situation and subsequently fails to meet the revised set of delivery or performance dates provided by MT to the Customer in writing. Unless MT has been deliberately or grossly negligent, all further claims of the Customer on the basis of the delay in performance are excluded. If MT cannot deliver or perform its obligations under the Contract due to Force Majeure or a failure of the Customer to cooperate or any other act, default or omission of the Customer, then MT will be entitled to perform its obligations under the Contract once the issue has been resolved, provided the issue occurred while MT was still allowed to deliver or perform and MT shall have no liability whatsoever for any delay or its failure to perform its obligations. 9. Agreed Performance Unless specified otherwise in writing, the agreed performance in respect of any repairs provided by MT, at the Customer’s request will be to adjust the relevant unit(s) to MT’s applicable standard specifications for that unit. Where the relevant unit(s) cannot be repaired to MT’s applicable standard specification due to the Customer limiting the repairs required or the time and money to be invested MT may exceed the Customer’s request if MT considers, at its sole discretion, that such additional repairs are reasonable and will ensure the proper functionality of the unit in question. The agreed performance levels for MT’s maintenance and care services are as set out in Conditions 26 and 28 below; for all other services the agreed performance levels will be as set out in the acknowledgement of order. 10. Refunds Where the Customer returns Goods (at the Customer’s cost) because he or she claims that the Goods are defective, MT will examine the returned Goods and will notify the Customer of its findings within a reasonable period of time. If MT (in its sole discretion) deems that the Goods are defective, MT may at its option repair, replace or provide a refund in respect of such defective Goods. MT will process any repair, replacement or refund as soon as practicable and, in the case of any refund, within 30 days of the day MT confirmed to the Customer that the Customer was entitled to the same. Such refunds will be made in full, including a refund of any delivery charges for sending the item to the Customer. 11. Import Duty If the Customer orders Goods for delivery outside the UK, they may be subject to import duties and taxes which are levied when the delivery reaches the specified destination. The Customer will be responsible for payment of any such import duties and taxes. Please note that MT has no control over these charges and cannot predict their amount. Customers should contact their local customs office for further information before placing an order. Customers must comply with all applicable laws and regulations of the country for which the Goods are destined. The Customer will indemnify and keep indemnified MT in respect of all costs, proceedings, losses and liabilities resulting from any breach by the Customer of any such laws. 12. Retention of Title to Property The Goods will be at the Customer’s risk from the time of delivery. Property in and title to all Goods will remain with MT until MT has received payment for the full price of all the Goods (and/or all other goods and/or services supplied by MT to the Customer under any other contract whatsoever).. The Customer may sell or use Goods in which title is retained during the course of their normal business, but may not give such Goods by way of pledge or pledge these Goods as security. Until the property in and title to the Goods passes to the Customer: the Customer shall keep the Goods properly stored, protected and insured and separate from all or any other goods whether belonging to MT, the Customer or any third party; MT shall be entitled at any time forthwith to revoke the Customer’s power to deal with the Goods; and such power shall automatically cease if an Insolvency Event shall occur in respect of the Customer; and the Customer shall not make any modification to the Goods, the Software or their packaging or alter, remove or tamper with any marks, numbers or other means of identification used on or in relation to the Goods. Upon termination of the Customer’s power to deal with the Goods, the Customer shall place the Goods at the disposal of MT and MT are hereby irrevocably authorised without the need for consent of any third party but using only such force as may be necessary, to enter upon any premises of the Customer or any third party for the purpose of removing the Goods. If third parties claim title to Goods with retained title, the Customer will inform MT without delay, will notify the person making the claim of MT’s title and will support MT in enforcing its rights, including taking all the necessary steps required to preserve MT’s rights, including commencing litigation at the Customer’s own expense. If the Customer breaches the Contract, e. g. by delaying payment, the Customer will be obliged to return the Goods with retained title if requested by MT, in return for which MT will not terminate the Contract. 13. Payment Where services, maintenance or care are provided on an ongoing basis, MT will invoice the Customer for these at the beginning of the billing period or as soon as reasonably practicable thereafter. The Customer will pay MT’s invoices in full within 30 days from the date of the relevant invoice. Depending on the scope of an order, payments for such services, maintenance or care are due either upon placement of the order by the Customer or upon partial delivery of the same of between 40 to 50% of their respective order value. BACS or cheque are the only methods of payment accepted. Invoices for Seminars and Training Sessions will be issued at the beginning of the respective session and payment is due immediately and without deduction. 14. Delay of Payment Where a Customer fails to pay an invoice by the due date, MT will be entitled to charge the Customer interest on all monies outstanding from the due date until the actual date of payment (both before and after judgment) at a rate of 8% above the base rate of the Bank of England calculated on a daily basis. 15. Setting-Off and Refusal of Payment The Customer cannot exercise any right of set-off in respect of amounts owed to or by MT. 16. Change of Pricing by MT for Ongoing Maintenance or Care MT may increase its prices for maintenance and services by giving the Customer written notice 2 months prior to the end of the Minimum Term. The Customer has 4 weeks from the date of receipt of the written notice from MT to object to the change. Where the Customer so objects, the Customer will be entitled to give notice to MT to terminate the Contract as of the date of the proposed price increase. 17. Automatic Extension of Contract Where services, maintenance or care are performed on an ongoing basis the Contract will come into effect upon acceptance by MT of the first order from the Customer for Software maintenance. The Contract will initially run until the date specified at “Minimum Service Duration” as set out in the “MT Service Product List” or until the expiry date where an expiry date is stipulated in the Contract (“Minimum Term”). Subject to one of the Parties serving written notice of termination on the other at least three months prior to the expiry of the Minimum Term, the Contract will be extended automatically. In the case of Software Licences supplied without a time limit, the Contract will extend until December 31st of the current year. The subsequent extension periods will begin on January 1st and end on December 31st of the respective year. In the case of Software Licences supplied with limited validity (e.g. a licence for 1-year) the extension is based on the terms and conditions set out in the description of the respective licence (e.g. extension by one further year). Unless otherwise agreed in writing, any extension to a Contract will be on the basis of MT’s current price list as at the date of such extension. 18. Delivery Obligations and Shipping The conditions for EXW (ex works) (MT’s premises or such other place referred to in the relevant order) as set out in the Incoterms 2010 apply to delivery of any Goods. Claims for any transport damages and any replacement of damaged Goods, remain with the Customer who is responsible for adhering to the mode and period for the filing of any claims with carriers, shippers and insurers. 19. Scope of Warranty (Material Deficiencies and Deficiencies in Title) MT warrants that the Hardware is free from defects in workmanship and material as at the time of transfer of risk; and warrants that the Software does not contain any flaws which void or substantially reduce its value or suitability for the usual or contracted purpose. Where MT is not the author of the Software, MT does not warrant that such Software will run without interruptions or errors, nor that MT will be capable of resolving all Software errors, nor that the Customer will be capable of achieving all of the functions included in the Software in all of the combinations chosen by the Customer, nor that these will meet the Customer’s requirements. MT will only warrant the quality and/or durability of Goods if it has expressly agreed in writing with the Customer that it will do so. The warranty period is 1 year. Where MT is the author of the Software such Software is subject to MT’s standard warranty. 20. Obligation to Inspect and Serve Notice of Defects The Customer must inspect the Goods upon delivery or repair and must notify MT in writing of any failure by MT to meet the specification within 7 days of delivery or repair or (where the failure was not apparent on reasonable inspection) within a reasonable time being no more than 1 month after discovery of the failure. Where the Customer fails to provide such notice MT will have no liability under its warranty. 21. Liability Subject only to Condition 21 d), MT shall not be liable to the Customer in contract, tort (including without limitation negligence) and/or breach of statutory duty for any loss or damage which the Customer may suffer by reason of any act, omission, neglect or default (including negligence) in the performance of the Contract by MT, its servants or agents, in a sum which is greater than GBP 200,000 per incident or series of connected incidents. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect loss of any kind resulting from these Conditions, its performance or any breach of its terms. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect economic loss of any kind including (but without limitation) loss of business opportunity, reputation, goodwill resulting from these Conditions, its performance or any breach of its conditions. Notwithstanding any other provision herein, nothing in these Conditions shall operate so as to limit or exclude MT’s non-excludable liability in respect of death or personal injury caused by the negligence of MT to exclude the application of Section 12 of the Sale of Goods Act 1979 and to exclude liability for fraudulent misrepresentation. MT’s liability for loss of data is limited to the effort required to restore the data from proper backups provided by the Customer. 22. Third Party Rights If any third party claims or takes action against the Customer, because Goods delivered by MT, or their use in accordance with the instructions provided by MT, purportedly violate their commercial rights or proprietary rights, then the Customer will inform MT of the same. MT agrees that they will assist the Customer in defending such claims. Where the claim is made to the Customer within 12 months of the date of delivery, MT will indemnify the Customer against claims provided that the Customer: appoints MT to defend the claims or to settle the dispute, and promptly notifies MT of any such claim, keeps the Customer informed of all information received and provides such reasonable assistance to MT as it shall reasonably require, does not defend the action itself without coordinating such defence with MT, and does not at any time admit liability or otherwise settle or compromise or attempt to settle or compromise the said claim or action except upon the express instruction of MT, the alleged breach of rights is not based on alteration of the delivered item used by the Customer, and does not use the item delivered by MT in conjunction with other items and/or in a fashion that breaches any such rights, in a situation where the use of the item as delivered by MT would not have breached the rights of the person who has filed the claim. MT may at any time and at its own expense acquire on behalf of the Customer the right to continue to use the Goods, to replace the Goods or alter them in such a fashion that the rights of others are no longer breached. If this is not possible, the Customer shall return or destroy the Goods if required to do so by MT who will reimburse the purchasing price for the Goods less depreciation. If the Customer refuses to do so, MT will no longer defend the claim or provide the Customer with any further support. The Customer has no further rights in case of disputes over proprietary rights with third parties and MT shall have no liability therefore unless MT could be blamed for acting deliberately or with gross negligence. Part IV Special Conditions for Delivery of Software 23. Conditions of Use for Delivered Software In the case of delivery of Software to the Customer, MT hereby grants the Customer a simple, non exclusive and non-transferable, licence to use the Software (“Licence”) . The validity of the Licence is not time limited, unless otherwise specified to the contrary in the terms and conditions of the Licence. MT, grants the Customer the use of such Software in the form of the object code and the user documentation with the use being restricted to one electronic data processing system at any one time and only for the tasks for which it is intended. Unless permitted by law, the Customer will not decompile the Software or perform reverse engineering. The Customer may duplicate the Software but only to the extent that this is required for the permitted use, and in order to allow it to perform data backup. Upon delivery of any Software, including updates and upgrades, the Customer will immediately produce a backup copy. MT may terminate the Licence granted to the Customer pursuant to this Condition 23 with immediate effect if the Customer is in breach of the conditions for the use of the Software for a period of 30 days from the date of a written notice of such a breach from MT or any third party. On termination of this Contract howsoever arising, the Customer will return to MT within 30 days all Software together with any related materials owned and licensed by MT and shall delete all copies and partial copies of the Software however stored within 7 days of service of the notice. Proof of such deletion must be provided to MT without delay. On receipt of prior written consent from MT, the Customer may retain a copy of the Software for the purposes of archiving. 24. Delivery of Software MT will only install the Software if this has been expressly agreed in writing between the Customer and MT. MT is able to provide telephone consultancy and support concerning questions relating to the application of the respective Software products as well as the solution of problems that may occur as provided for in Condition 26 below. 25. Prerequisites for Running the Delivered Software The proper running of Software systems supplied will only be guaranteed if the Hardware and operating system components used correspond to the reference systems of the respective manufacturer(s), as well as having been approved and certified. Unless otherwise agreed in the Contract, the Customer shall ensure that the provisions in this Condition 25 are complied with. Part VMaintenance and Care Application Software 26. Scope of Performance of MT Services for Application Software For the Software products, unless otherwise expressly agreed in writing, MT will provide the following services, denoted by Service Level “SW-Service STANDARD” and Service Level “SW-Service E-STANDARD”: Right to use Software and documentation updates: MT grants the Customer a non-transferable, non-exclusive Licence to use the Software and any documentation or updates. The right of use is not limited in validity, unless otherwise specified in the terms and conditions of the Licence. Software and documentation updates: MT will supply the Customer with the current version of the Software as specified in the Contract. This will be done as specified by the manufacturer of the Software. The documentation will be supplied in the form determined by the manufacturer of the Software. The installation of Software updates will be performed by suitably qualified personnel of the Customer. Alternatively for an additional charge, MT may install the Software updates on behalf of the Customer. Where the Customer has adapted the Software, the Customer will be liable for the additional cost of performing the same adaptation to the new version of the Software or alternatively the Customer may perform the necessary adaptation himself. Hotline (Service Level “SW-Service STANDARD” only) MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. E-mail Hotline (Service Level “SW-Service E-STANDARD” only) MT is able to provide e-mail consultancy and support in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours Wherever possible, qualified consultancy will be provided by MT within the Response Time. MT Hotline: E-mail: hotline@MT.com Internet: http://www.MT.com/customersupport Software error messages Where Software problems occur which MT is unable, for whatever reason, to resolve, the Customer may send a written error message to MT. The purpose of such an error message is to identify the error in the Software and enable the manufacturer to resolve the error. MT shall liaise with the manufacturer(s) of the Software products to resolve any Software errors as promptly as possible. Restoration of any data, regardless of the cause of the data loss, is not the responsibility of MT. 27. Obligation of the Customer to Co-operate Pre-conditions for the provision of the services by MT to the Customer are that the Customer has legally acquired the Software and holds a corresponding Licence to use it. In addition, the Software must be in the same condition that it was in when it was delivered. The services exclusively relate to the current release and delivered version of the Software. If earlier Software versions are used, a one-time update service which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Services will not be performed for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). If the operating system for the Hardware is not included in the Contract, the Customer must update the operating system to the most recent version (e. g. by purchasing updates) if this is required in order to use the new versions of the application Software. Hardware and Operating Systems 28. Scope of Performance of MT Maintenance and Care Services for Hardware and Operating System For Hardware products and the operating system, unless otherwise agreed in writing, MT will provide the following services, denoted by Service Level “HW-Service SPECIAL”: The scope of performance is briefly set out in the “Special Description” for each product listed in the attached “MT Service Product List”. The exact scope of performance will be determined in accordance with the attached description of performance issued by the respective MT service operator (“Service Operator” including but not limited to Hewlett-Packard, Fujitsu Siemens and Silicon Graphics). The following shall also apply: Hotline MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Hardware products and operating system, as well as the resolution, (in so far as it is reasonably practicable to do so) of any problems which may occur. This service will be performed by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. Where queries arise outside of the Contact Hours, the Customer should address such queries directly to MT’s Service Operator Response time for Hardware failures MT will use reasonable endeavours to solve a query within the Response Time. The Response Time shall be deemed to have been initiated either as soon as the customer service personnel arrives on the relevant site, or as soon as remote diagnosis is started, where either is required to resolve the problem. The appropriate Response Time will be determined in accordance with the attached description of performance issued by the respective MT Service Operator. 29. Services Not Included Unless otherwise agreed in writing, the following services will not be provided by MT to the Customer: a) Repair/re-acquisition of devices that have been damaged as a result of: incidents of war of any type civil wars, nuclear energy, deliberate action of the Customer (not of his subcontractors) b) Repair/re-acquisition that is required because of repair work or alterations of devices carried out by the Customer or any third party without the prior written consent of MT. c) Work required due to interface problems between MT’s devices and those of other manufacturers and suppliers. d) Customer service which is required because a product that is not covered under this Contract has caused an error. e) Customer service that has become necessary because devices have been used under adverse conditions (e.g. including contaminations and deviations from recommended room temperature and relative humidity) or in conjunction with accessories or (device-specific) consumables (e.g. including foreign disks, disk stacks, cassettes, printer paper and print heads of any type) (“Device Specific Consumables”) which do not meet the manufacturer’s specifications. f) Replacement of Device-Specific Consumables. g) Data backup. h) Calibration work that is not related to repair. 30. Restoration of Data/Programs The restoration of data and programs upon repair or replacement of a defective hard disk is limited to starting the copying program (Restore) used to restore the last full data backup. 31. Obligation of the Customer to Cooperate a) Hardware service Pre-conditions for the provision of Hardware services by MT are that the Hardware has been acquired legally and has been installed properly at the Customer’s site. In addition the Hardware affected must correspond to the current revision and be in proper condition when including in the Contract. These pre-conditions shall be met immediately after the expiry of the warranty period specified in the Contract. If the Hardware is included in the Contract at a later date, these pre-conditions must first be confirmed by a takeover inspection of the Hardware by MT, which will be independently invoiced and paid for by the Customer, and if required the pre-conditions will be achieved by MT undertaking the required repair work. b) Operating System Service Pre-conditions for the provision of operating system services are that the Customer has legally acquired the Software and has been granted the necessary corresponding Licence to use it. In addition the Software must be in the same condition as when it was delivered to the Customer. The services exclusively relate to the current release and version of the Software. If earlier Software versions are used, a one-time “Update Service” which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Operating System services will not be provided for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). Part VI Generally Applicable Conditions 32. Prices and Fees for Special Services The following items are not included in the payment for services under Conditions 26 and 28 above and will be invoiced separately in accordance with MT’s current price list: Services performed outside Working Hours on the express request of the Customer. Services to correct errors caused negligently by the Customer or by any unauthorised third party as a result of improper treatment, unsuitable operating media, unauthorised manipulations, Software manipulations, non-adherence to operating conditions or otherwise. ices required due to faulty handling, excessive vibration, chemical influence, excessive dust burden or non-adherence to the properties set forth in the unit specifications. Unreasonable wait times and delays in the performance of services which are caused by the Customer. Services to remedy failures caused by Force Majeure. 33. Backup of Customer Data Prior to the commencement of any service work undertaken by MT, the Customer will backup all data in such a way that it may easily be restored by MT in the event that it is lost in the service process. 34. Change of Installation/Application Site Where maintenance and care services are provided on an ongoing basis by MT, the Customer will immediately inform MT in writing of any change to the installation or application address. If such a change results in an increase in MT’s expenses. MT reserves the right to either increase the prices charged to recover the additional expense incurred or alternatively MT may serve notice on the Customer to terminate the Contract where the new address is outside United Kingdom. 35. Miscellaneous Service Conditions and Obligations of the Customer to Co-operate MT may appoint authorised third parties to provide services. The Customer may only transfer title to services to third parties with the prior written consent of MT. Where defective components or devices are replaced by MT, these will become the property of MT. Extension of the products included in the maintenance agreement may be included in this Contract with the consent of the Customer. On request, MT will offer to the Customer a corresponding extension of the Contract, provided maintenance for the respective product is available. Where MT has to perform any services, the Customer shall accurately and without delay provide MT with any/all information that is required to perform such services. The Customer will provide MT with the name of a competent and appropriately qualified contact person and will provide the name of an appropriate substitute in order for the Hardware and Software to be maintained. Any contact(s) will have participated in the respective Seminars and/or Training Sessions held from time to time by MT or alternatively will have acquired comparable knowledge. These contacts will be available to MT’s technicians on site or will have access to the MT’s hotline as applicable. Consumables and Auxiliaries (which shall include documentation, application programs, data, telephone lines for transmission of voice and data) are not included in the scope of performance and shall be provided by the Customer in the vicinity of the system, such consumables and auxiliaries will be provided during Working Hours or, with prior consultation, outside of these hours. Additionally, the Customer will provide to MT computing time and consumables as required. 36. Specifically Ordered Service Days If service days are ordered for call-off within a specified period, such orders are binding. The services will become due for payment once they have been performed or by the end of the defined time period at the latest. Specifically ordered service days to be called off within a defined time period, can still be called off during a time of three months beyond the expiry of such defined time period. Thereafter they are lost. The claim to payment is thereby unaffected. For users that register on our website (if any), we also store the personal information they provide in their user profile. All users can see, edit, or delete their personal information at any time (except they cannot change their username). Website administrators can also see and edit that information.

Message
123

Courses matching "alterations"

Show all 31

Dressmaking for Mind and Body - Weekly Dressmaking Course with Helen

5.0(1)

By Stitching Kitchen

Get 6 weeks of quality sewing me time with Helen at the Stitching Kitchen sewing studio - Wednesday evenings!

Dressmaking for Mind and Body - Weekly Dressmaking Course with Helen
Delivered In-Person in Brackley + more
£27.50 to £150

Tailoring and Alterations Mastery

By Online Training Academy

The Tailoring and Alterations Mastery course provides a comprehensive understanding of Tailoring, covering fundamental skills such as sewing machine operation and basic techniques, progressing to advanced alterations and special projects. In today's modern world, where personalization and sustainability are valued, mastering Tailoring is essential. The ability to tailoring clothing not only ensures a perfect fit but also extends the lifespan of garments, reducing waste in the fashion industry. Learning this skill opens doors to various job opportunities in the UK, where there is a high demand for skilled tailors. According to recent data, the average salary for a tailor in the UK ranges from £18,000 to £30,000 per year, depending on experience and expertise. The advantages of pursuing this Tailoring and Alterations Mastery course are significant, with the sector experiencing a steady increase in demand for tailoring services. Recent statistics indicate a 10% rise in demand for tailoring services over the past five years, highlighting the promising prospects for those skilled in the art of Tailoring. Enrol now and unlock a world of opportunities in the thriving field of tailoring and alterations. Key Features: CPD Certified Tailoring and Alterations Mastery course Free Certificate from Reed CIQ Approved Developed by Specialist Lifetime Access Course Curriculum Module 01: Introduction to Tailoring Module 02: Sewing Machine Essentials Module 03: Basic Sewing Techniques Module 04: Altering Tops and Shirts Module 05: Altering Pants and Skirts Module 06: Advanced Alterations Module 07: Special Projects Learning Outcomes: Craft impeccable garments showcasing a deep understanding of tailoring fabric and design. Master sewing machine essentials for precise and efficient stitching. Execute tailoring and alterations on tops, shirts, pants, and skirts with finesse. Showcase advanced tailoring skills through intricate garment transformations. Explore special projects, unleashing your creativity in bespoke fashion creations. Develop confidence in undertaking diverse sartorial challenges with newfound expertise. Accreditation All of our courses are fully accredited, including this Tailoring and Alterations Mastery Course, providing you with up-to-date skills and knowledge and helping you to become more competent and effective in Tailoring. Certification Once you've successfully completed your Tailoring and Alterations Mastery Course, you will immediately be sent a digital certificate. Our Tailoring and Alterations Mastery Course certification has no expiry dates, although we do recommend that you renew them every 12 months. CPD 10 CPD hours / points Accredited by CPD Quality Standards Tailoring and Alterations Mastery 1:15:17 1: Module 1 Introduction to Tailoring 12:22 2: Module 2 Sewing Machine Essentials 10:06 3: Module 3 Basic Sewing Techniques 10:14 4: Module 4 Altering Tops and Shirts 09:28 5: Module 5 Altering Pants and Skirts 09:35 6: Module 6 Advanced Alterations 11:04 7: Module 7 Special Projects 11:28 8: Leave A Review 01:00 Who is this course for? This Tailoring and Alterations Mastery Course can be taken by anyone who wants to understand more about the topic. With the aid of this course, you will be able to grasp the fundamental knowledge and ideas. Additionally, this Tailoring and Alterations Mastery Course is ideal for: Aspiring fashion enthusiasts seeking to hone their tailoring craftsmanship. Individuals keen on exploring the intricate art of garment alterations and tailoring. Creatives looking to add a unique skill set to their repertoire such as tailoring and alteration. Those desiring to craft customised garments for personal satisfaction. Fashion aficionados eager to master the delicate balance of fabric manipulation through tailoring and alterations. Requirements Learners do not require any prior qualifications to enrol on this Tailoring and Alterations Mastery Course. You just need to have an interest in Tailoring and Alterations Mastery Course. Career path After finishing this Tailoring and Alterations Mastery course you will have multiple job opportunities waiting for you. Some of the the following Job sectors of Tailoring and Alterations are: Tailor - £18K to £30K/year. Alterations Specialist - £17K to £25K/year. Fashion Designer - £20K to £45K/year. Costume Maker - £18K to £35K/year. Wardrobe Stylist - £16K to £35K/year. Certificates Digital certificate Digital certificate - Included Reed Courses Certificate of Completion Digital certificate - Included Will be downloadable when all lectures have been completed.

Tailoring and Alterations Mastery
Delivered Online On Demand1 hour 18 minutes
£12

Tailoring and Alterations

By iStudy UK

Do you want to acquire the knowledge that will Help you Understand & Cope with Tailoring and Alterations? In a town where attire told tales, one course whispered secrets of perfect fits. Journey with us, from tangled threads to tailored triumphs. Here, every fabric has a destiny, waiting for the right hands to shape it. Witness ordinary clothes finding their extraordinary tales. 'Tailoring and Alterations' - where every stitch spins a story. Course Highlights Tailoring and Alterations is an award winning and the best selling course that has been given the CPD Certification & IAO accreditation. It is the most suitable course anyone looking to work in this or relevant sector. It is considered one of the perfect courses in the UK that can help students/learners to get familiar with the topic and gain necessary skills to perform well in this field. We have packed Tailoring and Alterations for teaching you everything you need to become successful in this profession. To provide you ease of access, this course is designed for both part-time and full-time students. It is also possible to study at your own pace. We have experienced tutors who will help you throughout the comprehensive syllabus of this course and answer all your queries through email. For further clarification, you will be able to recognize your qualification by checking the validity from our dedicated website. Why You Should Choose Tailoring and Alterations Lifetime access to the course No hidden fees or exam charges CPD Accredited certification on successful completion Full Tutor support on weekdays (Monday - Friday) Efficient exam system, assessment and instant results Download Printable PDF certificate immediately after completion Obtain the original print copy of your certificate, dispatch the next working day for as little as £9. Improve your chance of gaining professional skills and better earning potential. Who is this Course for? Tailoring and Alterations is CPD certified and IAO accredited. This makes it perfect for anyone trying to learn potential professional skills. As there is no experience and qualification required for this course, it is available for all students from any academic backgrounds. Requirements Our Tailoring and Alterations is fully compatible with any kind of device. Whether you are using Windows computer, Mac, smartphones or tablets, you will get the same experience while learning. Besides that, you will be able to access the course with any kind of internet connection from anywhere at any time without any kind of limitation. Career Path You will be ready to enter the relevant job market after completing this course. You will be able to gain necessary knowledge and skills required to succeed in this sector. All our Diplomas' are CPD and IAO accredited so you will be able to stand out in the crowd by adding our qualifications to your CV and Resume. Tailoring and Alterations Module 01: Introduction to Tailoring 00:12:00 Module 02: Sewing Machine Essentials 00:10:00 Module 03: Basic Sewing Techniques 00:10:00 Module 04: Altering Tops and Shirts 00:09:00 Module 05: Altering Pants and Skirts 00:10:00 Module 06: Advanced Alterations 00:11:00 Module 07: Special Projects 00:11:00

Tailoring and Alterations
Delivered Online On Demand1 hour 13 minutes
£25

Tailoring and Alterations

4.5(3)

By Studyhub UK

This Tailoring and Alterations course equips individuals with essential skills in garment modification and customization. Through a comprehensive curriculum, participants will learn the art of tailoring, from basic sewing techniques to advanced alterations, enabling them to transform clothing to fit their preferences. Learning Outcomes: Introduction to Tailoring: Understand the fundamentals of tailoring and its importance in garment modification. Sewing Machine Essentials: Master the operation of sewing machines and their use in alterations. Basic Sewing Techniques: Learn essential stitches and sewing skills for garment repair and customization. Altering Tops and Shirts: Gain proficiency in altering tops and shirts to achieve a perfect fit. Altering Pants and Skirts: Develop the skills to alter pants and skirts to suit individual preferences. Advanced Alterations: Explore complex alterations, including resizing and restyling garments. Special Projects: Apply acquired skills to create unique and customized clothing pieces. Why buy this Tailoring and Alterations?  Unlimited access to the course for forever Digital Certificate, Transcript, student ID all included in the price Absolutely no hidden fees Directly receive CPD accredited qualifications after course completion Receive one to one assistance on every weekday from professionals Immediately receive the PDF certificate after passing Receive the original copies of your certificate and transcript on the next working day Easily learn the skills and knowledge from the comfort of your home Certification After studying the course materials of the Tailoring and Alterations you will be able to take the MCQ test that will assess your knowledge. After successfully passing the test you will be able to claim the pdf certificate for £5.99. Original Hard Copy certificates need to be ordered at an additional cost of £9.60. Who is this course for? This Tailoring and Alterations course is ideal for Individuals interested in clothing customization and personal style enhancement. Aspiring fashion designers seeking foundational tailoring skills. Seamstresses and hobbyists looking to expand their alteration capabilities. Wardrobe stylists aiming to offer tailored fitting services. Prerequisites This Tailoring and Alterations was made by professionals and it is compatible with all PC's, Mac's, tablets and smartphones. You will be able to access the course from anywhere at any time as long as you have a good enough internet connection. Career path Tailor: Average earnings range from £18,000 to £30,000 per year. Fashion Designer: Salaries vary widely, with established designers earning substantially more. Seamstress: Average earnings range from £15,000 to £25,000 per year. Wardrobe Stylist: Earnings vary based on experience and clientele, with potential for substantial income. Course Curriculum Module 01: Introduction to Tailoring Introduction to Tailoring 00:12:00 Module 02: Sewing Machine Essentials Sewing Machine Essentials 00:10:00 Module 03: Basic Sewing Techniques Basic Sewing Techniques 00:10:00 Module 04: Altering Tops and Shirts Altering Tops and Shirts 00:09:00 Module 05: Altering Pants and Skirts Altering Pants and Skirts 00:10:00 Module 06: Advanced Alterations Advanced Alterations 00:11:00 Module 07: Special Projects Special Projects 00:11:00

Tailoring and Alterations
Delivered Online On Demand1 hour 13 minutes
£10.99

Tailoring and Alterations Training Program: Skill Enhancement

4.3(43)

By John Academy

Elevate your sewing expertise with our Tailoring and Alterations Training Program: Skill Enhancement. Master the art of garment customization, from basic sewing techniques to advanced alterations. Unleash your creativity in special projects and become a skilled tailor with our comprehensive course. Join now for a transformative journey in the world of fashion craftsmanship.

Tailoring and Alterations Training Program: Skill Enhancement
Delivered Online On Demand
£24.99

Tailoring and Alterations

By Course Cloud

In a world of mass-produced fashion, stand out by mastering the timeless craft of Tailoring and Alterations. This course isn't just about stitching fabrics together; it's about sculpting elegance, creating custom fits, and reimagining garments to mirror your creativity. Within seven comprehensive modules, you'll unravel the threads of the trade, transforming humble cloth into exquisite statements of style. Whether you're aspiring to launch a bespoke fashion empire or simply want to refine your sartorial skills, this course equips you to craft your own path. Unleash your imagination and gain the power to mould fashion according to your vision, merging tradition with innovation.

Tailoring and Alterations
Delivered Online On Demand
£25

Dressmaking for Mind and Body - the Sunday edition with Claire

5.0(46)

By Stitching Kitchen

Get a Sunday of quality sewing me time with Claire at the Stitching Kitchen sewing studio

Dressmaking for Mind and Body - the Sunday edition with Claire
Delivered In-Person in Brackley
£75

Sewing, Pattern Cutting, Embroidery Design for Fashion Design & Tailoring - CPD Certified

4.7(26)

By Academy for Health and Fitness

24-Hour Knowledge Knockdown! Prices Reduced Like Never Before Did you know sewing is not only a practical skill but can also have therapeutic benefits, reducing stress and increasing focus and concentration? The UK sewing industry, valued at £3.9 billion in 2023, is experiencing a resurgence, with a 15% increase in sewing machine sales in the past year. With the growing demand for handmade and sustainable fashion, there's never been a better time to learn the art of sewing. With a single payment, you will gain access to Sewing bundle, including 10 premium courses, a QLS Endorsed Hardcopy certificate (for the title course) and 11 PDF certificates for Absolutely free. This Sewing, Pattern Cutting, Embroidery Design for Fashion Design & Tailoring Bundle Package includes: Main Course: Diploma in Sewing at QLS Level 5 10 Additional CPDQS Accredited Premium Courses - Course 01: Sewing Patterns Training Course 02: Crochet for Beginners Course 03: Tailoring and Alterations Course 04: Embroidery For Beginners Certificate Course 05: Fabrics for Fashion Design: Essential Learning for Designers Course 06: Fashion Styling Fundamentals: Building a Career in Fashion Styling Course 07: Fashion Psychology: The Psychology Behind Style Choices Course 08: Revamp Your Closet Course 09: Fashion Store Assistant Training Course 10: Fashion Law Our comprehensive Sewing curriculum covers everything from the basics of sewing machines to working with patterns, cutting, marking, and hemming. You'll also learn hand stitches and how to maintain your sewing machine for optimal performance. Our tutors will guide you through each step of the process and provide personalised feedback on your projects. At the end of this Sewing Course, you will learn: Identify and operate different types of sewing machines Understand different fabrics and their properties Create and modify patterns for garments and accessories Produce high-quality seams, hems, and finishes Implement basic hand stitches for embellishment Maintain and troubleshoot sewing machines By the end of this sewing course, you will be able to create your own patterns, alter existing garments, and personalise your designs with hand embroidery. Whether you're looking to start a small sewing business, create bespoke garments for yourself and others, or simply enjoy the meditative process of sewing, this course is perfect for you. Why Choose Us? Get a Free CPD Accredited Certificate upon completion of Sewing Training Get a free student ID card with Sewing Training Training program (£10 postal charge will be applicable for international delivery) The Sewing Training is affordable and simple to understand This course is entirely online, interactive lesson with voiceover audio Get Lifetime access to the Sewing Training course materials The Sewing Training comes with 24/7 tutor support So enrol now in this Sewing Today to advance your career! Take a step toward a brighter future! *** Course Curriculum *** Main Course: Diploma in Sewing at QLS Level 5 Module 01: Knowing Your Sewing Machine Module 02: Types of Sewing Machine Module 03: Sewing Supplies and Products Module 04: Threads Module 05: Fabric Basics and Common Stitches Module 06: Working with Patterns Module 07: Cutting, Marking and Getting Ready to Sew Module 08: Sewing a Seam Module 09: Hand Stitches Module 10: Hems Module 11: Sewing Machine Maintenance Module 12: T-Shirts Module 13: Baby Blankets Course 02: Crochet for Beginners Module 01: Introduction Module 02: Equipment For Crochet Module 03: Know Your Yarn Module 04: Basic Crochet Stitches Module 05: Advance Crochet Stitches Module 06: Beginner Patterns Module 07: Crochet Techniques Module 08: Getting Started With Crochet Projects(Part 1) Module 09: Getting Started With Crochet Projects(Part 2) Course 03: Tailoring and Alterations Module 01: Introduction To Tailoring Module 02: Sewing Machine Essentials Module 03: Basic Sewing Techniques Module 04: Altering Tops And Shirts Module 05: Altering Pants And Skirts Module 06: Advanced Alterations Module 07: Special Projects =========>>>>> And 8 More Courses <<<<<========= How will I get my Certificate? After successfully completing the course, you will be able to order your QLS Endorsed Certificates and CPD Accredited Certificates as proof of your achievement. PDF Certificate: Free (Previously it was £12.99*11 = £143) QLS Endorsed Hard Copy Certificate: Free (For The Title Course: Previously it was £119) CPD 255 CPD hours / points Accredited by CPD Quality Standards Who is this course for? This bundle is ideal for: Students seeking mastery in this field Professionals seeking to enhance their skills Anyone who is passionate about this topic Requirements No prior background or expertise is required. Career path The Sewing at QLS Level 5 course will boost your CV and aims to help you get the job or even the long-awaited promotion of your dreams. Like as: Seamstress / Tailor Dressmaker Alterations specialist Fashion designer Textile artist Curtain maker Certificates CPD Accredited Digital Certificate Digital certificate - Included Upon passing the Course, you need to order a Digital Certificate for each of the courses inside this bundle as proof of your new skills that are accredited by CPD QS for Free. Diploma in Sewing at QLS Level 5 Hard copy certificate - Included Please note that International students have to pay an additional £10 as a shipment fee.

Sewing, Pattern Cutting, Embroidery Design for Fashion Design & Tailoring - CPD Certified
Delivered Online On Demand3 weeks
£109

Alterations Workshop - refashion, restyle, wear again

5.0(46)

By Stitching Kitchen

Spend half a day with Claire who will support you as you learn to alter and adjust clothes to fit and suit your personal style.

Alterations Workshop - refashion, restyle, wear again
Delivered In-Person in Brackley
£50

Climate Change Course

3.5(2)

By Elearncollege

Description Climate Change Diploma  Industrialisation and technological advancements in recent decades have adversely impacted the Earth's environment and climatic conditions. Climate change, directly and indirectly, affects the life of humanity and the rest of the organisms. Hence, it has become crucial to be aware of the climate crisis and foster a strong understanding of its effects. This Climate Change Diploma course introduces the students to many aspects of climate change. The areas explored in this Course include the Earth's biomes, structural development, oceans, and climate regulation. One will also study the influence of human activities such as industrialisation and agriculture, the response of humanity to the climate crisis, and how the Earth's climatic conditions will look in the future. Climate change or crisis refers to extended alterations in weather patterns and temperature. These alterations can also occur naturally. However, the rapid change in climate since the 19th century is predominantly due to human activities, including fossil fuel combustion (like oil, gas, and coal), which creates gases that trap heat (greenhouse gases). The Climate Change Diploma course introduces climate, its scientific study, and the effect of greenhouse gases on the Earth's natural conditions. Later, the Course explores the development and history of the Earth's composition and its relation to the surface climate. The Climate Change Diploma course will take one through distinct climates along with Earth's varying biomes, their response to changes in climatic conditions, and the differences between the Earth's principal climate control biogeochemical cycles. The learners will also explore the reaction of oceans to the increase in atmospheric carbon concentration and their effect on energy and material exchange. The Diploma course in Climate Change will require around 160 hrs to complete, using an e-learning method. The Course does not have a time limit, and the learners can complete it at their own pace. For those who are enthusiastic about the planet's wildlife, ecosystems, climate wellbeing, and implications related to the activities of humanity, the Diploma course in Climate Change provides the crucial information required to understand the grave issue of the climate crisis and how society can live sustainably to battle it. Learners will gain thorough knowledge about the effects of climate on ecosystems, weather, and human endeavours such as development and culture. The Climate Change Diploma course will investigate how agriculture affects the environment, how urbanisation affects geography, and how industrialisation affects climate, including the current implications of non-renewable fuels (fossil fuels). Towards the end of the Course, one will study the strategies for climate response through renewable resources, methods of production, and renewable resources. The learner will also explore the timelines of change in climate, climate trends, and response movements for sources of sustainable cities, policy development, and renewable energy sources. What you will learn   1: Defining Climate Change  2: Pollution Who Produces It  3: The Debate on Climate Change  4: Evidence to Support Climate Change  5: Modelling of Future Climate  6: Impacts of Climate Change  7: Climate Tipping Points and Thresholds  8: Politics of Climate Change  9: Solutions  10: What does the Future Hold  Course Outcomes After completing the course, you will receive a diploma certificate and an academic transcript from Elearn college. Assessment Each unit concludes with a multiple-choice examination. This exercise will help you recall the major aspects covered in the unit and help you ensure that you have not missed anything important in the unit. The results are readily available, which will help you see your mistakes and look at the topic once again. If the result is satisfactory, it is a green light for you to proceed to the next chapter. Accreditation Elearn College is a registered Ed-tech company under the UK Register of Learning( Ref No:10062668). After completing a course, you will be able to download the certificate and the transcript of the course from the website. For the learners who require a hard copy of the certificate and transcript, we will post it for them for an additional charge.

Climate Change Course
Delivered Online On Demand9 days
£99
Show all 31

Search By Location