• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

371 Educators providing Truck courses delivered Online

Gar Training Services Ltd

gar training services ltd

5.0(4)

Romsey

Health and Safety Audits & Training. GAR Training Services is a family run company formed in 2007. We service the south coast and further if required, delivering quality training with our trusted team of instructors. Glen Randles founded the company and is assisted by his wife Leonie and Sister Shiree who organise the logistics from the office in Romsey Hampshire. Our instructors are from a variety of the working sectors and were friend of the family long before they all became instructors. Our goal is to assist our clients with quality training and support so they feel they are in good hands every time they require our services. Our strengths come from our experience and knowledge in our own unique fields so when an instructor is allocated you will know you are getting more than just the training course. We specialise in training in marina industry as well as construction and the warehouse environment. We are based in Romsey Hampshire but we are happy to travel should our clients request it. We have a training facility just outside of Romsey, with access to a large number of plant. Give Leonie a call in the office to discuss your needs. GLEN RANDLES Glen Randles started as a steel erector/ rigger/ slinger, working across the UK and Channel Islands on construction sites to refineries, dockyards and power stations. Glen steadily progressed to a mobile crane operator then to a lift supervisor and then to appointed person organising and managing the lifting operations, operating a variety of cranes, and other plant machinery. In 2006 Glen became a NPORS instructor teaching vast array of plant machines from cranes, excavator, MEWPS and specific Marina based equipment to name a few. SHIREE RANDLES Shiree Randles worked in the hospitality and catering industry for 25 years and in that time managed public houses and hotels. Part of the task was ensuring the Health and Safety and risk assessments for all areas such as the soft play areas to the kitchens and offices were suitable and sufficient. Joining the company in 2012 Shiree opened new areas for our company to assist our clients and has become our expert on the newly revised CDM regulations 2015, and manages all CHAS application on behalf of our clients that require this service. LEONIE RANDLES Leonie Randles joined the company formally in August 2016, however has been supporting Glen Randles in the background for that last 10 years! A qualified Management Accountant by trade, with experience in Business Planning, Fast-Moving Consumer Goods (FMCG), Analytical Skills, Transport and Logistics, and Coaching, Leonie runs the office and is the main point of contact for all our clients. Coming from the Beauty industry, Leonie appreciates the importance of great customer relationships and is dedicated to ensuring G A R Training offers the best solution for our client needs. WAYNE DAVIS Wayne Davis has over 30 years of experience as a plant machinery operator and maintenance engineer working for companies such as JCB, Oil Spill Response and CW Plant. Wayne started working with us in February 2018. Wayne became an NPORS accredited instructor in February 2019, and has a great reputation with our clients, and great feedback from their candidates on the depth of knowledge he shares on his courses. STEPHEN KEMP Steve Kemp’s career has involved working in all kinds of industries, but his specifically unique expertise are from working in demolition as well as recycling & waste site management. Steve has previously worked for companies such as Hughes and Salvidge and Raymond Brown, as well as plant hire companies. Steve is the newest member to our team, and started working with us in April 2021. Steve became an NPORS accredited instructor in July 2021, and is a fantastic addition to our instructor team! TIM PEARCE Tim Pearce has 30 years experience in the Manufacturing and Engineering industry, and is an established ITSSAR accredited instructor. Tim is one of our contracted instructors that we have had the pleasure of working with for the past few years. Tim predominantly covers training on various lift truck categories, as well as MEWPS, Overhead Cranes and Fire Marshal. Tim is always so professional and a great representative of G A R when we use his services. NEIL MCROBB Neil McRobb completed 22 years in the British Army serving in the Port & Maritime Regiment, part of the Royal Corps of Transport. He was a qualified instructor & examiner on all types of cranes, plant equipment and port operation. On leaving he re-qualified his management qualifications to their civilian equivalents and moved into the logistics industry, managing warehouses and transport operations, also being responsible for Health & Safety and Human Resources. In 2009 Neil moved back into training becoming an NPORS instructor, he joined us in May 2021 and brings a wealth of knowledge and experience on a wide variety of skills to GAR

McDonald Water Storage

mcdonald water storage

4.6(16)

Fife

When World War Two broke out the firm moved into the production of aircraft wings and it was to be peacetime before it turned its attention to plumbing, manufacturing copper cylinders and complete plumbing systems, mostly for Australia and the Middle East. As the markets for complete systems decreased McDonald Water Storage found itself expanding within the copper cylinder market. McDonald Water Storage is proud of its independent status – it is one of only a very few British independent manufacturers remaining in the plumbing and heating industry. The 1930’s saw the original company formed as McDonald Engineers by the McDonald brothers, motor and general engineers. WWII had McDonald Engineers rapidly expanding to three factories manufacturing various items for the war effort but mainly aircraft wings for Hudson Bombers and other aircraft. The end of the war saw them to move into new products such as pre-fabricated plumbing, sheet metalwork and vented copper cylinders. Financial instability in the 1960’s saw the company bought over by the Inglefield Group who employed James R Stewart (late Father of Bill, Jamie and Grandfather of David and Rachael) as managing director in 1960. JR Stewart performed a management buyout in 1973. At this time the main activities were prefabricated plumbing, vented copper cylinders (solar cylinders from 1968, foam lagging from 1971, coils from 1975), truck bodies and waste disposal skips. Due to declining markets and a recession, the decision was taken to close the steel fabricating factory in Kirkcaldy and rationalise the entire operation into the Loughborough Road, Kirkcaldy factory – concentrating wholly on copper cylinders and soon after, acquiring the BSI Kitemark. The company bought its first computer in 1986. 1990’s Huge changes! The company moved premises to Glenrothes in 1992. The POWERflow unvented system was launched the same year, soon followed by the THERMflow mains pressure thermal storage system. Jamie Stewart took over as Sales Director to support Bill Stewart as Managing Director and James Stewart became chairman. James sadly passed away and Bill also took on the role of Chairman. During the 1990’s, it was decided to pursue product specification by appointing two technical sales managers. The company website and emails were setup in 1996 one of the first in their industry to do so. In 2004 The Company bought the Amada CNC Punch Machine, our biggest capital Investment at that time. In 2006 the company self funded and built a 10,000sq.ft. factory extension to accommodate increased sales. More recently in 2018 Jamie Stewart became MD and David Stewart son of Bill, became Sales Director. The company took on a Divisional Director for England and to make it clearer to potential new customers what we do, changed our name to McDonald Water Storage and took on a full time marketing manager to spread the word! In 2020 amid the Covid strife, we celebrated our 75 year anniversary. A year of challenging trading and working conditions with the worldwide pandemic. Despite that we saw the Company all pull together to ensure not only survival, but indeed many improvements, growth and investment and several product launches with the introduction of MULTIflow, ELSOflow, WHEELIflow and COPPERtouch. A redesign and relaunch of our website was undertaken, with improved customer usability and a dedicated spares and online cylinder section.

Course Gate

course gate

5.0(1)

London

Welcome to Course Gate, your gateway to a world of knowledge and opportunity. We are a leading online learning marketplace dedicated to empowering individuals and organisations with the skills they need to succeed in today's dynamic and competitive environment. -------------------------------------------------------------------------------- Our Mission Our mission is to make education accessible and enjoyable for everyone. We want to help you discover your passion, expand your knowledge, and grow your confidence. Whether you want to learn a new language, master software, or develop a hobby, we have the right course for you.  -------------------------------------------------------------------------------- Our Vision  At Course Gate, we envision a future where education knows no boundaries. Our goal is to eliminate the traditional barriers of time, location, and accessibility, empowering learners from diverse backgrounds to unlock their full potential. Through our innovative approach, we aim to revolutionise the learning experience by making top-quality education accessible to everyone, regardless of their location. -------------------------------------------------------------------------------- Why Choose Course Gate? When you opt for Course Gate, you're choosing excellence, convenience, and an unparalleled learning experience. Here's why learners and organisations worldwide trust us: * Unmatched Quality: We meticulously curate our courses, collaborating with industry-leading experts to provide the highest-quality, relevant, and up-to-date content. * Flexible Learning: Our platform enables you to learn at your own pace, fitting into your schedule. Whether you're a full-time professional, a stay-at-home parent, or a busy student. * 24/7 Customer Support: Our dedicated customer support team is available to assist you whenever you need help. * Accreditation & Endorsement: CPD accredited & UKRLP registered course provider in the UK. * Affordability: We believe education should be accessible to all. Course Gate provides competitive pricing and discounts, ensuring that the cost never becomes a barrier to your personal and professional development. So, what are you waiting for? Join the thousands of learners who have already chosen Course Gate as their trusted learning partner and unlock your full potential. --------------------------------------------------------------------------------