Cademy logoCademy Marketplace
  • Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

265 Educators providing Systems courses in London

SystemsLondon
Tutor Stream

tutor stream

London

Introduction The TutorStream Website helps Students to find Tutors, Tutors to market their services, and for Students to book and pay for Lessons. All of these terms and conditions apply to Students and Tutors, unless they specifically state otherwise, or are marked with a "T", when they only apply to Tutors. Clause 5 only applies to Tutors. These terms and conditions replace any previous versions of them. The TutorStream Website is owned and operated by Tutor Stream Ltd, trading as TutorStream. TutorStream is a limited liability company registered in England and Wales under company number 12338203. TutorStream's registered office is at Kemp House, 152-160 City Road, London, EC1V 2NX United Kingdom. TutorStream's other contact details are set out on the Website, which is at https://TutorStream.net. A User may register on the Website as a Student or as a Tutor. A User may use the Website without registering, but if a User does register, certain information will be stored, making future visits to the Website easier. By registering on or using our Website, the User agrees to be bound by these terms and conditions. These terms and conditions are legally binding – every User should read them fully before agreeing to them. (Please print or save these terms for future use as TutorStream will not keep a file copy specifically for the User and TutorStream cannot guarantee that they will remain accessible on the Website in future.) If a User does not wish to be bound by these terms, they should not use the Website. ("T") Where the person who agrees these terms and conditions contracts on behalf of a company/organisation, they hereby confirm that they have authority to act on behalf of that entity. Certain words are defined in clause 16 (Definitions) of these terms and conditions and are capitalised throughout. TutorStream Rights & Responsibilities This clause sets out what TutorStream promises to do: To help Tutors and Students to meet by allowing Tutors to advertise their professional tuition services on the Website, and Students to book and pay for Lessons To maintain a functioning Website, including communication systems, a booking platform and Online Classroom, wherever possible. TutorStream cannot guarantee that the Website will always be available, or that it will always work, but it will try to have it up and running properly at all times. Every now and again, the Website might need to be taken offline for maintenance purposes. To communicate any planned maintenance of the Website or Platform downtime. To use reasonable endeavours (which means to try hard!) to keep the Website free from viruses and worms. To use reasonable endeavours to check the identity of all Tutors and the background checks of Tutors who have Background Checked Status. (But if a Student is concerned about any Tutor, do not meet a Tutor alone.) To decide when a Tutor’s profile is sufficiently complete to be set live on the Website and be accessible by other Users. To communicate new Bookings, confirmation of Bookings and cancellations, to both Students and Tutors via the Website and by email (except where a Student or Tutor has chosen to alter their notification settings to exclude email communication). To endeavour to ensure that each Student’s payment of Lesson Fees and the payment of each Tutor’s Tutor Fees are processed promptly and usually within 9 days of a Lesson, when there is no Complaint or Failed Payment. To endeavour to ensure Complaints are considered promptly and in accordance with these terms and conditions. To endeavour to ensure that refunds to Students are made promptly in accordance with these terms and conditions. To endeavour to ensure that Failed Payments are processed promptly and in accordance with these terms and conditions. To take precautions TutorStream considers appropriate to protect Students' and Tutors' information. To monitor postings made on the Website and messages sent between Students and Tutors. TutorStream does so in the hope of helping Students and Tutors meet, but also to stop misuse of the Website, as set out in these terms and conditions.

Message
Springboard4education (Uk)

springboard4education (uk)

London

Last but not least, attending a UK university means you’ll be able to make connections and develop a high-quality network that can prove very useful when the time comes to look for a job. Besides, the UK is a multicultural society, and as such, you’ll easily be able to meet friends for life. Education Systems in the UK The UK education system can be divided into four distinct levels, and the national curriculum is organised into ‘’key stages’’: Primary education: Students will attend between ages five and age 11 and undertake key stage 1 and 2 with compulsory subjects and tests to assess their English and Maths skills Secondary education: Students will typically be between 11 and 16 years of age, undertake key stages 3 and 4 and work towards taking their GCSE’s. Further education: Students who have completed their secondary education and wish to gain access to university or college must complete further education. They’ll have to obtain qualifications such as A-Levels, BTEC's, or other qualifications based on the type of curriculum they wish to pursue. Higher education: With over 33% of British people entering the higher education level every year, the competition is fierce. A-Levels are the main criteria to get into university. However, there are some entry pathways, such as enrolling for an Access to Higher Education (Access to HE) course. If you’re an international student, you‘ll need to complete the equivalent to the UK’s further education. Note that all four regions of the UK, including Northern Ireland, England, Wales, and Scotland, have their own forms of education systems. The main difference pertains to primary and secondary education, where each region has its own qualifications. Higher Education Higher education in the UK offers students multiple options ranging from bachelors and masters to doctoral degrees. As an international student, you can apply for pathway programme in order to improve your English skills while accessing foundation courses to consolidate your basic knowledge in some specific areas before enrolling for university. This will ensure you acquire both the English and academic qualifications you need to get access to better universities. Note that both universities and private institutions offer pathway programs. Undergraduate courses Undergraduate courses are a great way for students to transition to the university level after high-school. Indeed, undertaking an undergraduate course in the UK will provide you with a first-degree level (Bachelor) while allowing you to explore different subjects and better define your preferences. To help you understand the different types of programs you can choose from, we’ve added a table below. Postgraduate studies Postgraduate courses allow students to obtain a postgraduate diploma, a professional degree, a master’s degree, or a doctorate and usually require having a first degree to enter (Bachelor). More specifically, there are four main types of postgraduate degrees: Taught courses: Master’s degrees or postgraduate diplomas Research degrees: PhDs, DPhils, integrated PhDs, and professional doctorates Conversion courses: Certificates and diplomas based on crash courses designed to get you up to speed on a subject you haven’t studied before Professional qualifications: Practical training to enter a specific profession To help you understand the different types of programs you can choose from, we’ve added a table below. Tuition Fees Tuition fees will greatly vary depending on your location, the institution you’re studying at, the study level, the program, and the duration of the program. Normally, the tuition fees range from 10,000GBP to 20000GBP+ per year, depend on the university or college you are going to attend. Students life in the UK The UK includes four different countries, including England, Scotland, North Ireland, and Wales, and is home to 66.65 million inhabitants. A few general facts you should be familiar with when enrolling for a British university: British people like law and order Respect and politeness are expected Punctuality is important Universities and college campuses are non-smoking zones Although the UK is usually safe, travel in a group at night, lock your doors, and avoid leaving your valuables in plain sight Accommodation There are a few different types of accommodation options available when it comes to accommodation for international students depending on your location, your budget, and whether or not your university features halls of residence: Halls of residence Finding accommodation will most likely be one of the first obstacles to tackle as an international student. One of the most popular options for a foreign student who starts the first year of study in the UK is to stay in a hall of residence. Halls of residence are buildings offering small single or shared flats usually provided by universities or colleges to accommodate students. Living in a hall of residence is an excellent way to meet other students as they feature common facilities and communal areas such as canteens, pool tables, or bars. This option is usually cheaper than renting a flat or a house. Private Flats or Houses While choosing to live in a flat or a house is more costly than staying in a hall of residence, this option allows for flexibility as you’ll be able to choose the location you live in. However, choosing to live by yourself might make meeting new people more challenging. According to a study led by the World University Ranking in 2020, the average student rent is £126 per week on average, and the average annual rent cost is £4,914. Note that around 70% of rents include bills. Shared flats Some websites, such as studentspareroom.co.uk or room.go.uk , allow students to research shared houses and shared flat options. Less expensive than renting a private flat, this option will also allow you to meet other people (may they be students or not). It also means you won’t have to consistently stay on the college or university premises. Public Transport The UK is well connected through different types of transport: Trains: Most cities and towns in the UK have a train station. You can plan your journey and book your tickets on thetrainline.com . As a full-time international student under the age of 25, you are eligible for a 30% discounted pass . Coaches: Coaches are a great option if you’re planning to explore the UK as these large buses are designed for long journeys. Buses: Buses are the cheapest way to travel around and are very popular among students. You can use the app city mapper to plan your journey. You can find tickets based on your destination here . Underground: Whether you’re studying in London or just exploring for a couple of days, you’ll most likely use ‘’the tube’’ to travel around. As an international student under the age of 25, you can apply for the 18+ student Oyster card , which will give you access to a 30% discount on fares. Social Life Two great ways to immerse yourself into the UK culture and embrace the local way of life is to learn English and join student clubs or societies. Some campuses, including Loughborough University, Lancaster, or Liverpool Hope, offer great facilities such as spas, gyms, shops, bars, and clubs, which can help you meet other students. The towns and campuses brim with bars, restaurants, and clubs welcoming countless students every night. Going out on the weekends is an integral part of the UK way of life and is a widespread activity among students. Note that, if you’re invited to a house party or for dinner, you’ll be expected to bring something along (dessert if it’s a dinner, for instance, or a drink if it’s a party). Note that the pub culture is embedded in the UK way of life as it’s a way for people to relax and socialise. Although the country is multicultural and international cuisines are an integral part of the UK food scene, Britons have a few specialties you might want to try on a day out with friends. Fish & Chips, Bangers & Mash, Shepherd’s pie or steak & kidney pudding are some of the British favourites to try. Last but not least, the local sense of humour might surprise you. Indeed, Brits use sarcasm and irony a lot (famous British sense of humour) so make sure you don’t take things to the first degree as they’ll often be teasing you. You can deleted it The UK student visa Cost of Visa The fee for the Tier 4 General Visa is £348. In addition to the general visa fee, you’ll have to pay for the healthcare surcharge up to £470 a year, depending on your location, home country, and the type, of course, you choose to enroll in. The fees for the Short-term Student Visa range currently between £97 for visas up to 6 months and £186 for visas up to 11 months. Healthcare As a Tier 4 student visa holder who is studying in the UK for six months or longer, you will have access to the NHS (the British Healthcare System). If you’re not eligible via your visa, you will need to look into private insurance. Note: For students who apply with SpringBoard4Education in any countries, we help you prepare the necessary documents for your student visa application, as well as other steps in the process, completely free of charge. Work opportunities International students who hold a Tier 4 student visa are allowed to work part-time while studying in the UK. Let’s take a look at the working rights before diving into working options. Working rights If you hold a Tier 4 visa issued for full-time degree-level studies, you’ll be allowed to work for up to 20 hours a week and full-time during vacations or summer holidays. Your institutions must be listed on the official UKVI Sponsor list and the list of “recognised bodies .” Note that you’re not allowed to work, may it be work placement or work experience, on a Short-term Student Visa. Reinstatement of the two-year post-study work visa In 2019, the UK government announced the reinstatement of the two-year post-study work visa ( Graduate Route ) for international students studying in the UK, starting from September 2020. This will allow international students enrolled in a bachelor's or master's degree to be able to work in the UK for up to two years after completing their master’s degree and up to three years after completing their Ph.D. There will be no restrictions regarding the type of work that can be performed by former international students. Sponsorship For international students who wish to find long term work in the UK (up to 5 years), the Tier 2 Visa is the best option. To be eligible for this visa, the first step will be to find an employer who is a licensed sponsor and is willing to hire you. They must also demonstrate that they’ve advertised the role but couldn’t fill it. You’ll find more information on this visa here . Opportunities Working part-time while studying can be a great way to help fund the cost related to your study. It can also be an excellent way for students to develop their work experience and critical employability skills and ultimately increase your chances of being offered a job at the end of your studies. Popular part-time jobs for international students include: Server Bartender Student Ambassador Admin jobs Animal Caretaker Childminder Tutor Retail assistant Customer Service

Message
Standout Programmes

standout programmes

London

Penny started her career as a corporate lawyer at City firm Freshfields. On a career break she became involved as a volunteer in her local prison which led her to train as a tutor with Prison Fellowship and lead the restorative justice based Sycamore Tree programme in HMP Wandsworth for 12 years. She was involved in rolling out Sycamore Tree in HMP Bronzefield and HMP Pentonville and also has experience of tutoring the course with people in prison long term. Penny was a Trustee of Prison Fellowship for several years and acted as Interim CEO in 2015. Penny has also volunteered with the Prison Reform Trust, supporting work around mental health and criminal justice issues. She has a Masters degree in Criminology and Criminal Justice from King’s College London and believes in second chances and releasing potential. Andy Bater, Head of Operations Andy joined the StandOut team in October 2022 from a community organisation based in Holborn. With a background in project and operations management working with various large corporate organisations, he brings his breadth of experience and knowledge to StandOut. Despite his career achievements, Andy would much rather talk about his time being a mature student in Canada, starting a wellbeing and employment social enterprise and especially about rugby, boxing and the Andrew Kaufman book 'All My Friends are Superheroes’. Rich McStraw, Fundraising Manager Rich joined us in April 2022 from Clinks, the infrastructure organisation for the voluntary sector working in criminal justice. He spent the last three years as Clinks’ Fundraising Officer, and prior to this worked as a freelance fundraiser and sales manager for renewable heating systems. He has previous experience of fundraising regulation and compliance, sales and marketing, and developing training programmes. Louise Harbert, Communications Officer Louise is passionate about supporting people with lived experience to share their stories. Before joining the StandOut team, she worked for a health charity to amplify the voices of volunteers and shine a light on health inequalities. A strong believer in social justice, Louise is determined to change the narrative around prison leavers, and is excited to contribute to StandOut’s development and growth as our first full-time comms officer. Alex Rose, Coaching Manager Alex joined the team in April 2018 from Prospects where he was a National Careers Service advisor. Previously he worked as a behaviour change manager and an achievement coach working on gang prevention and exit programmes. Alex is passionate about helping people who have been in prison back into work and recently completed his OCR Level 6 Diploma in Career Guidance & Development. Amrit Hunjan, Lead Coach HMP Wandsworth Amrit joined the StandOut team in September 2019 having previously worked as part of a council multi-disciplinary team working collectively to improve the well-being, participation and attainment of young people in mainstream education. Amrit connected with StandOut whilst volunteering with the youth mentoring service Trailblazers at HMP Wandsworth and she is passionate about using a relational approach to build confidence and unlock potential. Amy Young, StandOut Coach HMP Wandsworth Amy joined StandOut in November 2022 after completing an English Literature degree at KCL. During and following her degree she voluntarily set up Shakespeare and poetry workshops in HMP Brixton, believing in the power of arts in Criminal Justice. She found she facilitated enlightening and illuminating conversations, using literary themes to generate powerful reflections and increased emotional awareness. She looks forward to coaching at Wandsworth and supporting trainees with a holistic approach, offering guidance and practical help post-release. Hannah Jolley, Lead Coach HMP Pentonville Hannah joined StandOut in February 2022. Prior to this, she was Lead Coach on the Spear Programme, supporting young people who face barriers to employment and also coached corporate delegates on various topics. Hannah graduated from Durham University with BA Criminology, and spent time volunteering with vulnerable people in prison at HMP Durham. She is passionate about reducing reoffending rates, through showing that there is hope and are opportunities out there for those leaving prison. Erin Crombie, Lead StandOut Coach Erin discovered StandOut in 2018 whilst completing her Masters in Criminological Research at the University of Cambridge, when she carried out an evaluation of the charity for her dissertation. On graduating, Erin joined the education department in HMP Pentonville as a Student Support Worker, whilst maintaining contact with StandOut in a voluntary capacity. She joined StandOut at the beginning of 2020 and is now in a new role leading our expansion to a third prison. Erin’s favourite thing about working for StandOut is seeing the trainees’ confidence grow over the duration of the Phase 1 course and getting to celebrate their achievements. Louisa Laven, Lead Community Coach Louisa joined the StandOut team in November 2020. Prior to this she was on the Unlocked Graduates Programme, working as a frontline prison officer for two years while completing a Masters in MSc Leadership and Custodial Environments. Louisa loved the relational and support aspect of the officer role, but wanted to move into the charity sector and focus on the critical resettlement period after prison. She is enthusiastic about helping people leaving prison to get back on their feet and build towards a positive future. Iona Warren, Community Coach Iona joined the StandOut team in September 2022 after spending two years as a prison officer on the Unlocked Graduates programme. Whilst working in a women's prison, she completed a Masters in Applied Custodial Leadership, writing a dissertation on the women's experience of trauma informed practice in their establishment. She loved building relationships with the women on her landing, and relished the opportunity to support them whilst in custody. She is particularly excited to now be working with those transitioning into the community, and is passionate and motivated to see them thrive. StandOut Trustees Joe Froud, Chair Joe is the co-founder of Paloma Capital LLP, a London based real estate private equity business that was established in 2015. Paloma raises equity from foundations and endowments, pensions funds and family offices and invests in UK commercial real estate projects. Prior to this he was the founder and Managing Partner of Columbus Capital Management LLP, a real estate private equity joint venture that he established with Schroders plc in 2008. Joe is married with four children and lives in West London. Liz Delacave, Trustee Liz Delacave is a leadership consultant, experienced in training leaders, developing teams and coaching individuals to excel. She studied Engineering Science at the University of Oxford, worked in Citibank’s global commercial and investment banks, becoming chief of staff for Citibank’s European Private Bank. While Divisional Finance Director of a multinational engineering company, she was responsible for managing a global change programme. As a Non-Executive Director, she has helped turn around an underperforming NHS Foundation Trust hospital in East Anglia. Liz has advised a number of charities, including the International Federation of the Red Cross in Geneva and Prison Fellowship. Marion Peters, Trustee Marion Peters studied English Literature at Reading University before joining the Post Office fast track graduate management scheme. After 4 years in marketing and development roles Marion entered the charitable sector, working for international and small local charities in a generalist capacity. Marion has led client service teams, HR departments and spearheaded major fundraising projects and most recently worked as CEO of a heritage almshouse. Since stepping down from this role, Marion has continued to offer her operational and organisational skills to not for profit organisations on a voluntary basis. Passionately committed to the Justice System, Marion has been a volunteer within Her Majesty’s Court Services for over 20 years and is a great believer that where we have come from does not determine who we are. Joseph Ewing, Trustee Joseph studied Politics, Philosophy and Economics at Oxford University, has worked in a range of research, campaigning and public affairs roles - including three and a half years in public affairs at Cancer Research UK - and now works in policy at the Academy of Medical Sciences. His work includes policy development, advocacy and strategy. He became a trustee in April 2019 and is still inspired by StandOut’s belief in people. StandOut Consultants Jo Fellows, Programme and Coaching Consultant, Co Founder Jo's background is in group facilitation and project management and she has extensive experience leading employability services for those with additional barriers to employment. Her experience includes 4 years working with the award winning Spear course, partnering with IBM through her work with City Gateway and designing a 1-1 service for those leaving custody or care. Jo is passionate about equipping people coming up for release with the tools, skills and confidence to step into sustainable and fulfilling work. Jo has a Postgraduate Diploma in Voluntary Sector Management from CASS Business School. Jo co-founded StandOut with Penny and now supports StandOut as a consultant bringing her expertise in programme design and coaching skills.

Message
Moderntronics

moderntronics

Harrow,

In these terms and conditions (“Conditions”) the following expressions shall have the following meanings: “Business Day” means any day other than Saturday, Sunday or a public holiday. “Business Hours” means the hours detailed in Condition 32 below. “Contact Hours” means Monday to Friday (inclusive) from 07:00 hours to 17:00 hours but excluding bank holidays. “Contract” means any contract between MT and the Customer for the supply of Hardware and/or Software (with the associated Licence) and/or services which is subject to these Conditions. “Customer” means any person, firm or company who enters into a Contract with MT to which these Conditions apply. “Force Majeure” means any event outside the reasonable control of either Party affecting its ability to perform any of its obligations (other than as to payment) under these Conditions. “Goods” means all or any tangible or intangible goods or intellectual property including but not limited to Hardware and Software which are provided to a Customer in accordance with these Conditions. “Hardware” means any hardware provided by MT to the Customer. “MT” means MODERNTRONICS Ltd. or its servants and agents as the case may be. “Insolvency Event” means any one of the following in relation to the Customer: (i) a notice being issued to propose a resolution for winding up or dissolution, or such a resolution being passed; (ii) a petition for a winding up or an administration or bankruptcy order being presented, or such an order made; (iii)any steps being taken with a view to a voluntary arrangement or other assignment, composition or arrangement with all or any creditors or any moratorium, readjustment, rescheduling, forgiveness or deferral of all or any indebtedness; (iv) suspension of payments to all or any creditors and/or ceasing business; (v)an encumbrancer taking possession of all or any assets; (vi) an administrator or receiver being appointed over the Customer or all or any of its assets; (vii)any action anywhere similar or analogous to any of the foregoing; or MT reasonably believing that any of the foregoing is imminent. “Licence” has the meaning attributed to it in Condition 23 below. “Minimum Term” means the term set out in Condition 17 below. “Party” means MT or the Customer and “Parties” means both of them. “Response Time” means two Working Hours from an initial call to the hotline under Condition 26 or 28 below. “Seminar” means any seminar provided by MT. “Service Operator” has the meaning given to that term in Condition 28 below. “Site” means https://www.moderntronics.com and all subdomains including (but without limitation) “Software” means software or software updates or upgrades provided by MT and licensed to the Customer under Condition 23 below. “Training Sessions” means any training session provided by MT. “Working Hours” means the hours between 9:00 to 17:00 on any Business Day 2. Interpretation In these Conditions, the following rules apply: A person includes a natural person, corporate or unincorporated body (whether or not having separate legal personality). A reference to a Party includes its personal representatives, successors or permitted assigns. A reference to a statute or statutory provision is a reference to such statute or provision as amended or re-enacted. A reference to a statute or statutory provision includes any subordinate legislation made under that statute or statutory provision, as amended or re-enacted. Any phrase introduced by the terms including, include, in particular or any similar expression shall be construed as illustrative and shall not limit the sense of the words preceding those terms. A reference to writing or written includes faxes and e-mails. 3. General Information These Conditions apply when MT: sells and delivers Hardware; sells and delivers Licences; sells and delivers Software; or provides repairs or any other services to the Customer. They will also apply to other business transactions unless MT agrees that alternative special conditions apply. These Conditions apply to the exclusion of any other conditions that may be proposed by a Customer or implied by law (insofar as such exclusion is lawful). Part II Specific Provisions for the Use of the Online Shop Customers purchasing Goods from the Site, must read all Parts of these Conditions, which apply to them in full. 4. Consumers The Goods and services provided by MT are designed only for sale to and use by businesses in the course of their business activities. MT does not knowingly sell to any person dealing as a consumer or supply anything for personal use. 5. Customer’s Status By placing an order on the Site, the Customer warrants that he or she is: legally capable of entering into binding contracts and, where the Customer is an individual, that he or she is at least 18 years old; and is dealing in a business capacity and purchasing Goods and/or services for the purpose of his business and not for personal use. Part III General Conditions for the Provision of Goods and Services 6. Formation of Contract Quotations provided by MT to the Customer are not binding on MT. The Customer’s order constitutes an offer to MT to buy the Goods or services. All orders are subject to acceptance by MT. The offer will be deemed accepted, and a Contract formed, when MT sends the Customer confirmation that the Goods have been dispatched (“Dispatch Confirmation”) or, in the absence of a Dispatch Confirmation, when the Goods are delivered. The Contract will only relate to those Goods whose dispatch is confirmed to the Customer by a Dispatch Confirmation or if no Dispatch Confirmation is sent, those Goods which are actually dispatched. MT is not obliged to supply any Goods which may have been part of the Customer’s order until the dispatch of such Goods has been confirmed in a separate Dispatch Confirmation. Subject to Condition 17 below, an order for services will be deemed to have been accepted, and a Contract formed, when MT sends the Customer confirmation that the services ordered will be provided (“Service Confirmation”) or, in the absence of a Service Confirmation, when the services begin to be provided. Oral representations will only be binding upon MT if they are expressly confirmed in writing by MT to the Customer. 7. Price Unless MT expressly specifies prices to the Customer, MT’s current list of prices applicable at the time of the acknowledgement of order will apply. Unless otherwise agreed in writing, all prices are exclusive of value added tax, postage, freight, insurance, forwarding fees, installation and commissioning, travelling expenses and subsistence, which will be added as appropriate. MT will charge overtime for work outside of their normal Business Hours at up to 150% of the hourly rate from time to time applicable during Business Hours. Subject to Condition 16 below, prices are liable to change at any time, but changes will not affect orders in respect of which MT has already sent the Customer a Dispatch Confirmation or a Service Confirmation as the case may be. The Site contains a large number of products and it is always possible that, despite MT’s efforts, some of the products listed may be incorrectly priced. MT will normally verify prices as part of dispatch procedures so that, where a product’s correct price is less than our stated price, MT will charge the lower amount when dispatching the product to you. If a product’s correct price is higher than the price stated on our site, MT will normally, at our discretion, either contact you for instructions before dispatching the product, or reject your order and notify you of such rejection. MT is under no obligation to provide any Goods or services to the Customer at an incorrect (lower) price, even after MT has sent a Dispatch Confirmation or a Service Confirmation in relation to those Goods or services if such incorrect price could reasonably have been expected to be recognised by the Customer as an error. 8. Delivery and Availability The Customer’s order for Goods will be fulfilled by the delivery date in the Dispatch Confirmation or, if no delivery date is specified, then within 30 days of the date the Customer made his order (where such an order leads to a Contract). The period for delivery or performance of the Contract will normally commence on MT’s acknowledgement of the order. However, if the Customer is required to do anything before MT can effect delivery, MT will, as soon as practicable, notify the Customer accordingly. The time within which MT must deliver any Goods will run from the date on which MT receives notice from the Customer that it has duly complied with such notification from MT. Unless otherwise agreed in writing, any periods mentioned in the acknowledgement of order for services and Software development are based on a preliminary estimate of the required workload and therefore are approximate only. Time of delivery and performance is not of the essence. If MT fails to meet any delivery or performance dates set out in the acknowledgement of order and is solely responsible for such failure, the Customer may terminate the Contract but only after MT has been given an opportunity to rectify the situation and subsequently fails to meet the revised set of delivery or performance dates provided by MT to the Customer in writing. Unless MT has been deliberately or grossly negligent, all further claims of the Customer on the basis of the delay in performance are excluded. If MT cannot deliver or perform its obligations under the Contract due to Force Majeure or a failure of the Customer to cooperate or any other act, default or omission of the Customer, then MT will be entitled to perform its obligations under the Contract once the issue has been resolved, provided the issue occurred while MT was still allowed to deliver or perform and MT shall have no liability whatsoever for any delay or its failure to perform its obligations. 9. Agreed Performance Unless specified otherwise in writing, the agreed performance in respect of any repairs provided by MT, at the Customer’s request will be to adjust the relevant unit(s) to MT’s applicable standard specifications for that unit. Where the relevant unit(s) cannot be repaired to MT’s applicable standard specification due to the Customer limiting the repairs required or the time and money to be invested MT may exceed the Customer’s request if MT considers, at its sole discretion, that such additional repairs are reasonable and will ensure the proper functionality of the unit in question. The agreed performance levels for MT’s maintenance and care services are as set out in Conditions 26 and 28 below; for all other services the agreed performance levels will be as set out in the acknowledgement of order. 10. Refunds Where the Customer returns Goods (at the Customer’s cost) because he or she claims that the Goods are defective, MT will examine the returned Goods and will notify the Customer of its findings within a reasonable period of time. If MT (in its sole discretion) deems that the Goods are defective, MT may at its option repair, replace or provide a refund in respect of such defective Goods. MT will process any repair, replacement or refund as soon as practicable and, in the case of any refund, within 30 days of the day MT confirmed to the Customer that the Customer was entitled to the same. Such refunds will be made in full, including a refund of any delivery charges for sending the item to the Customer. 11. Import Duty If the Customer orders Goods for delivery outside the UK, they may be subject to import duties and taxes which are levied when the delivery reaches the specified destination. The Customer will be responsible for payment of any such import duties and taxes. Please note that MT has no control over these charges and cannot predict their amount. Customers should contact their local customs office for further information before placing an order. Customers must comply with all applicable laws and regulations of the country for which the Goods are destined. The Customer will indemnify and keep indemnified MT in respect of all costs, proceedings, losses and liabilities resulting from any breach by the Customer of any such laws. 12. Retention of Title to Property The Goods will be at the Customer’s risk from the time of delivery. Property in and title to all Goods will remain with MT until MT has received payment for the full price of all the Goods (and/or all other goods and/or services supplied by MT to the Customer under any other contract whatsoever).. The Customer may sell or use Goods in which title is retained during the course of their normal business, but may not give such Goods by way of pledge or pledge these Goods as security. Until the property in and title to the Goods passes to the Customer: the Customer shall keep the Goods properly stored, protected and insured and separate from all or any other goods whether belonging to MT, the Customer or any third party; MT shall be entitled at any time forthwith to revoke the Customer’s power to deal with the Goods; and such power shall automatically cease if an Insolvency Event shall occur in respect of the Customer; and the Customer shall not make any modification to the Goods, the Software or their packaging or alter, remove or tamper with any marks, numbers or other means of identification used on or in relation to the Goods. Upon termination of the Customer’s power to deal with the Goods, the Customer shall place the Goods at the disposal of MT and MT are hereby irrevocably authorised without the need for consent of any third party but using only such force as may be necessary, to enter upon any premises of the Customer or any third party for the purpose of removing the Goods. If third parties claim title to Goods with retained title, the Customer will inform MT without delay, will notify the person making the claim of MT’s title and will support MT in enforcing its rights, including taking all the necessary steps required to preserve MT’s rights, including commencing litigation at the Customer’s own expense. If the Customer breaches the Contract, e. g. by delaying payment, the Customer will be obliged to return the Goods with retained title if requested by MT, in return for which MT will not terminate the Contract. 13. Payment Where services, maintenance or care are provided on an ongoing basis, MT will invoice the Customer for these at the beginning of the billing period or as soon as reasonably practicable thereafter. The Customer will pay MT’s invoices in full within 30 days from the date of the relevant invoice. Depending on the scope of an order, payments for such services, maintenance or care are due either upon placement of the order by the Customer or upon partial delivery of the same of between 40 to 50% of their respective order value. BACS or cheque are the only methods of payment accepted. Invoices for Seminars and Training Sessions will be issued at the beginning of the respective session and payment is due immediately and without deduction. 14. Delay of Payment Where a Customer fails to pay an invoice by the due date, MT will be entitled to charge the Customer interest on all monies outstanding from the due date until the actual date of payment (both before and after judgment) at a rate of 8% above the base rate of the Bank of England calculated on a daily basis. 15. Setting-Off and Refusal of Payment The Customer cannot exercise any right of set-off in respect of amounts owed to or by MT. 16. Change of Pricing by MT for Ongoing Maintenance or Care MT may increase its prices for maintenance and services by giving the Customer written notice 2 months prior to the end of the Minimum Term. The Customer has 4 weeks from the date of receipt of the written notice from MT to object to the change. Where the Customer so objects, the Customer will be entitled to give notice to MT to terminate the Contract as of the date of the proposed price increase. 17. Automatic Extension of Contract Where services, maintenance or care are performed on an ongoing basis the Contract will come into effect upon acceptance by MT of the first order from the Customer for Software maintenance. The Contract will initially run until the date specified at “Minimum Service Duration” as set out in the “MT Service Product List” or until the expiry date where an expiry date is stipulated in the Contract (“Minimum Term”). Subject to one of the Parties serving written notice of termination on the other at least three months prior to the expiry of the Minimum Term, the Contract will be extended automatically. In the case of Software Licences supplied without a time limit, the Contract will extend until December 31st of the current year. The subsequent extension periods will begin on January 1st and end on December 31st of the respective year. In the case of Software Licences supplied with limited validity (e.g. a licence for 1-year) the extension is based on the terms and conditions set out in the description of the respective licence (e.g. extension by one further year). Unless otherwise agreed in writing, any extension to a Contract will be on the basis of MT’s current price list as at the date of such extension. 18. Delivery Obligations and Shipping The conditions for EXW (ex works) (MT’s premises or such other place referred to in the relevant order) as set out in the Incoterms 2010 apply to delivery of any Goods. Claims for any transport damages and any replacement of damaged Goods, remain with the Customer who is responsible for adhering to the mode and period for the filing of any claims with carriers, shippers and insurers. 19. Scope of Warranty (Material Deficiencies and Deficiencies in Title) MT warrants that the Hardware is free from defects in workmanship and material as at the time of transfer of risk; and warrants that the Software does not contain any flaws which void or substantially reduce its value or suitability for the usual or contracted purpose. Where MT is not the author of the Software, MT does not warrant that such Software will run without interruptions or errors, nor that MT will be capable of resolving all Software errors, nor that the Customer will be capable of achieving all of the functions included in the Software in all of the combinations chosen by the Customer, nor that these will meet the Customer’s requirements. MT will only warrant the quality and/or durability of Goods if it has expressly agreed in writing with the Customer that it will do so. The warranty period is 1 year. Where MT is the author of the Software such Software is subject to MT’s standard warranty. 20. Obligation to Inspect and Serve Notice of Defects The Customer must inspect the Goods upon delivery or repair and must notify MT in writing of any failure by MT to meet the specification within 7 days of delivery or repair or (where the failure was not apparent on reasonable inspection) within a reasonable time being no more than 1 month after discovery of the failure. Where the Customer fails to provide such notice MT will have no liability under its warranty. 21. Liability Subject only to Condition 21 d), MT shall not be liable to the Customer in contract, tort (including without limitation negligence) and/or breach of statutory duty for any loss or damage which the Customer may suffer by reason of any act, omission, neglect or default (including negligence) in the performance of the Contract by MT, its servants or agents, in a sum which is greater than GBP 200,000 per incident or series of connected incidents. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect loss of any kind resulting from these Conditions, its performance or any breach of its terms. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect economic loss of any kind including (but without limitation) loss of business opportunity, reputation, goodwill resulting from these Conditions, its performance or any breach of its conditions. Notwithstanding any other provision herein, nothing in these Conditions shall operate so as to limit or exclude MT’s non-excludable liability in respect of death or personal injury caused by the negligence of MT to exclude the application of Section 12 of the Sale of Goods Act 1979 and to exclude liability for fraudulent misrepresentation. MT’s liability for loss of data is limited to the effort required to restore the data from proper backups provided by the Customer. 22. Third Party Rights If any third party claims or takes action against the Customer, because Goods delivered by MT, or their use in accordance with the instructions provided by MT, purportedly violate their commercial rights or proprietary rights, then the Customer will inform MT of the same. MT agrees that they will assist the Customer in defending such claims. Where the claim is made to the Customer within 12 months of the date of delivery, MT will indemnify the Customer against claims provided that the Customer: appoints MT to defend the claims or to settle the dispute, and promptly notifies MT of any such claim, keeps the Customer informed of all information received and provides such reasonable assistance to MT as it shall reasonably require, does not defend the action itself without coordinating such defence with MT, and does not at any time admit liability or otherwise settle or compromise or attempt to settle or compromise the said claim or action except upon the express instruction of MT, the alleged breach of rights is not based on alteration of the delivered item used by the Customer, and does not use the item delivered by MT in conjunction with other items and/or in a fashion that breaches any such rights, in a situation where the use of the item as delivered by MT would not have breached the rights of the person who has filed the claim. MT may at any time and at its own expense acquire on behalf of the Customer the right to continue to use the Goods, to replace the Goods or alter them in such a fashion that the rights of others are no longer breached. If this is not possible, the Customer shall return or destroy the Goods if required to do so by MT who will reimburse the purchasing price for the Goods less depreciation. If the Customer refuses to do so, MT will no longer defend the claim or provide the Customer with any further support. The Customer has no further rights in case of disputes over proprietary rights with third parties and MT shall have no liability therefore unless MT could be blamed for acting deliberately or with gross negligence. Part IV Special Conditions for Delivery of Software 23. Conditions of Use for Delivered Software In the case of delivery of Software to the Customer, MT hereby grants the Customer a simple, non exclusive and non-transferable, licence to use the Software (“Licence”) . The validity of the Licence is not time limited, unless otherwise specified to the contrary in the terms and conditions of the Licence. MT, grants the Customer the use of such Software in the form of the object code and the user documentation with the use being restricted to one electronic data processing system at any one time and only for the tasks for which it is intended. Unless permitted by law, the Customer will not decompile the Software or perform reverse engineering. The Customer may duplicate the Software but only to the extent that this is required for the permitted use, and in order to allow it to perform data backup. Upon delivery of any Software, including updates and upgrades, the Customer will immediately produce a backup copy. MT may terminate the Licence granted to the Customer pursuant to this Condition 23 with immediate effect if the Customer is in breach of the conditions for the use of the Software for a period of 30 days from the date of a written notice of such a breach from MT or any third party. On termination of this Contract howsoever arising, the Customer will return to MT within 30 days all Software together with any related materials owned and licensed by MT and shall delete all copies and partial copies of the Software however stored within 7 days of service of the notice. Proof of such deletion must be provided to MT without delay. On receipt of prior written consent from MT, the Customer may retain a copy of the Software for the purposes of archiving. 24. Delivery of Software MT will only install the Software if this has been expressly agreed in writing between the Customer and MT. MT is able to provide telephone consultancy and support concerning questions relating to the application of the respective Software products as well as the solution of problems that may occur as provided for in Condition 26 below. 25. Prerequisites for Running the Delivered Software The proper running of Software systems supplied will only be guaranteed if the Hardware and operating system components used correspond to the reference systems of the respective manufacturer(s), as well as having been approved and certified. Unless otherwise agreed in the Contract, the Customer shall ensure that the provisions in this Condition 25 are complied with. Part VMaintenance and Care Application Software 26. Scope of Performance of MT Services for Application Software For the Software products, unless otherwise expressly agreed in writing, MT will provide the following services, denoted by Service Level “SW-Service STANDARD” and Service Level “SW-Service E-STANDARD”: Right to use Software and documentation updates: MT grants the Customer a non-transferable, non-exclusive Licence to use the Software and any documentation or updates. The right of use is not limited in validity, unless otherwise specified in the terms and conditions of the Licence. Software and documentation updates: MT will supply the Customer with the current version of the Software as specified in the Contract. This will be done as specified by the manufacturer of the Software. The documentation will be supplied in the form determined by the manufacturer of the Software. The installation of Software updates will be performed by suitably qualified personnel of the Customer. Alternatively for an additional charge, MT may install the Software updates on behalf of the Customer. Where the Customer has adapted the Software, the Customer will be liable for the additional cost of performing the same adaptation to the new version of the Software or alternatively the Customer may perform the necessary adaptation himself. Hotline (Service Level “SW-Service STANDARD” only) MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. E-mail Hotline (Service Level “SW-Service E-STANDARD” only) MT is able to provide e-mail consultancy and support in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours Wherever possible, qualified consultancy will be provided by MT within the Response Time. MT Hotline: E-mail: hotline@MT.com Internet: http://www.MT.com/customersupport Software error messages Where Software problems occur which MT is unable, for whatever reason, to resolve, the Customer may send a written error message to MT. The purpose of such an error message is to identify the error in the Software and enable the manufacturer to resolve the error. MT shall liaise with the manufacturer(s) of the Software products to resolve any Software errors as promptly as possible. Restoration of any data, regardless of the cause of the data loss, is not the responsibility of MT. 27. Obligation of the Customer to Co-operate Pre-conditions for the provision of the services by MT to the Customer are that the Customer has legally acquired the Software and holds a corresponding Licence to use it. In addition, the Software must be in the same condition that it was in when it was delivered. The services exclusively relate to the current release and delivered version of the Software. If earlier Software versions are used, a one-time update service which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Services will not be performed for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). If the operating system for the Hardware is not included in the Contract, the Customer must update the operating system to the most recent version (e. g. by purchasing updates) if this is required in order to use the new versions of the application Software. Hardware and Operating Systems 28. Scope of Performance of MT Maintenance and Care Services for Hardware and Operating System For Hardware products and the operating system, unless otherwise agreed in writing, MT will provide the following services, denoted by Service Level “HW-Service SPECIAL”: The scope of performance is briefly set out in the “Special Description” for each product listed in the attached “MT Service Product List”. The exact scope of performance will be determined in accordance with the attached description of performance issued by the respective MT service operator (“Service Operator” including but not limited to Hewlett-Packard, Fujitsu Siemens and Silicon Graphics). The following shall also apply: Hotline MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Hardware products and operating system, as well as the resolution, (in so far as it is reasonably practicable to do so) of any problems which may occur. This service will be performed by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. Where queries arise outside of the Contact Hours, the Customer should address such queries directly to MT’s Service Operator Response time for Hardware failures MT will use reasonable endeavours to solve a query within the Response Time. The Response Time shall be deemed to have been initiated either as soon as the customer service personnel arrives on the relevant site, or as soon as remote diagnosis is started, where either is required to resolve the problem. The appropriate Response Time will be determined in accordance with the attached description of performance issued by the respective MT Service Operator. 29. Services Not Included Unless otherwise agreed in writing, the following services will not be provided by MT to the Customer: a) Repair/re-acquisition of devices that have been damaged as a result of: incidents of war of any type civil wars, nuclear energy, deliberate action of the Customer (not of his subcontractors) b) Repair/re-acquisition that is required because of repair work or alterations of devices carried out by the Customer or any third party without the prior written consent of MT. c) Work required due to interface problems between MT’s devices and those of other manufacturers and suppliers. d) Customer service which is required because a product that is not covered under this Contract has caused an error. e) Customer service that has become necessary because devices have been used under adverse conditions (e.g. including contaminations and deviations from recommended room temperature and relative humidity) or in conjunction with accessories or (device-specific) consumables (e.g. including foreign disks, disk stacks, cassettes, printer paper and print heads of any type) (“Device Specific Consumables”) which do not meet the manufacturer’s specifications. f) Replacement of Device-Specific Consumables. g) Data backup. h) Calibration work that is not related to repair. 30. Restoration of Data/Programs The restoration of data and programs upon repair or replacement of a defective hard disk is limited to starting the copying program (Restore) used to restore the last full data backup. 31. Obligation of the Customer to Cooperate a) Hardware service Pre-conditions for the provision of Hardware services by MT are that the Hardware has been acquired legally and has been installed properly at the Customer’s site. In addition the Hardware affected must correspond to the current revision and be in proper condition when including in the Contract. These pre-conditions shall be met immediately after the expiry of the warranty period specified in the Contract. If the Hardware is included in the Contract at a later date, these pre-conditions must first be confirmed by a takeover inspection of the Hardware by MT, which will be independently invoiced and paid for by the Customer, and if required the pre-conditions will be achieved by MT undertaking the required repair work. b) Operating System Service Pre-conditions for the provision of operating system services are that the Customer has legally acquired the Software and has been granted the necessary corresponding Licence to use it. In addition the Software must be in the same condition as when it was delivered to the Customer. The services exclusively relate to the current release and version of the Software. If earlier Software versions are used, a one-time “Update Service” which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Operating System services will not be provided for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). Part VI Generally Applicable Conditions 32. Prices and Fees for Special Services The following items are not included in the payment for services under Conditions 26 and 28 above and will be invoiced separately in accordance with MT’s current price list: Services performed outside Working Hours on the express request of the Customer. Services to correct errors caused negligently by the Customer or by any unauthorised third party as a result of improper treatment, unsuitable operating media, unauthorised manipulations, Software manipulations, non-adherence to operating conditions or otherwise. ices required due to faulty handling, excessive vibration, chemical influence, excessive dust burden or non-adherence to the properties set forth in the unit specifications. Unreasonable wait times and delays in the performance of services which are caused by the Customer. Services to remedy failures caused by Force Majeure. 33. Backup of Customer Data Prior to the commencement of any service work undertaken by MT, the Customer will backup all data in such a way that it may easily be restored by MT in the event that it is lost in the service process. 34. Change of Installation/Application Site Where maintenance and care services are provided on an ongoing basis by MT, the Customer will immediately inform MT in writing of any change to the installation or application address. If such a change results in an increase in MT’s expenses. MT reserves the right to either increase the prices charged to recover the additional expense incurred or alternatively MT may serve notice on the Customer to terminate the Contract where the new address is outside United Kingdom. 35. Miscellaneous Service Conditions and Obligations of the Customer to Co-operate MT may appoint authorised third parties to provide services. The Customer may only transfer title to services to third parties with the prior written consent of MT. Where defective components or devices are replaced by MT, these will become the property of MT. Extension of the products included in the maintenance agreement may be included in this Contract with the consent of the Customer. On request, MT will offer to the Customer a corresponding extension of the Contract, provided maintenance for the respective product is available. Where MT has to perform any services, the Customer shall accurately and without delay provide MT with any/all information that is required to perform such services. The Customer will provide MT with the name of a competent and appropriately qualified contact person and will provide the name of an appropriate substitute in order for the Hardware and Software to be maintained. Any contact(s) will have participated in the respective Seminars and/or Training Sessions held from time to time by MT or alternatively will have acquired comparable knowledge. These contacts will be available to MT’s technicians on site or will have access to the MT’s hotline as applicable. Consumables and Auxiliaries (which shall include documentation, application programs, data, telephone lines for transmission of voice and data) are not included in the scope of performance and shall be provided by the Customer in the vicinity of the system, such consumables and auxiliaries will be provided during Working Hours or, with prior consultation, outside of these hours. Additionally, the Customer will provide to MT computing time and consumables as required. 36. Specifically Ordered Service Days If service days are ordered for call-off within a specified period, such orders are binding. The services will become due for payment once they have been performed or by the end of the defined time period at the latest. Specifically ordered service days to be called off within a defined time period, can still be called off during a time of three months beyond the expiry of such defined time period. Thereafter they are lost. The claim to payment is thereby unaffected. For users that register on our website (if any), we also store the personal information they provide in their user profile. All users can see, edit, or delete their personal information at any time (except they cannot change their username). Website administrators can also see and edit that information.

Message
A-list Film Production Pro

a-list film production pro

London

ably. Productions Inc.: a production company that deals in all aspects of creative projects from film and television production to CD manufacturing http://www.acepix.com Ace Pix International, Inc.: a full in-house motion picture / television production and distribution company http://www.ancientpictures.comAncient Pictures: a Seattle-based motion picture and commercial production Company, as well as a networking center for writers to meet, enhance their skills and network in the film industry http://www.apotheosispictures.comApotheosis Pictures Productions: an independent film production company and the developers of the ScreenForge screenwriting software for Microsoft Word. ScreenForge is the best and most affordable screenplay formatting software available for MS Word, and a viable alternative to the much more expensive stand-alone screenwriting programs Armageddon Productions: creators of the 1997 home video release "Bloodletting," they develop and produce feature films, digital visual effects and music and movie soundtracks. They have also developed screenplays for other companies, such as Full Moon Pictures' "Witchouse" and "Alien Arsenal," and Regent Entertainment's upcoming "The Brotherhood" Assembler Films: a company that has shot and released films in Italy, Japan, India, the U.S. and Canada, to name a few Belarus Productions: Minsk-based independent production company, providing assistance to film-makers and broadcast journalists. TV production, film production, crew hire, equipment rent and location scouting in Belarus Black Cab Productions: an independent film, music, and literary production company specializing in horror, bizarre, and dark works http://www.blackfishfilms.comBlackFish Films: quality international productions specializing in non-broadcast projects for educational, military and corporate projects. Shooting 16, 35 and 70mm. Free goodies for independent producers Blokland Pictures: specializing in the development, production, and distribution of feature film drama; serving the international specialty marketplace http://www.angelfire.com/tn/tcthepackrat/bloodyfun.htmlBloody Fun Pictures: no-budget video/filmmaking, since 1996 http://www.bwave.f9.co.ukBrainwave: in the business of producing their own peculiar brand of entertainment for over a decade: films, radio plays, songs, etc. on the smallest budgets imaginable http://www.brilligprods.comBrillig Productions: exploring creative areas of filmmaking; developing narratives that range from the fanciful to the bizarre, visual designs that push the limits of independent cinema, and story-telling techniques that are inspired and inspirings http://www.c21etv.comC21ETV: one-stop-shop providing multimedia design, implementation and programming, VCD business cards production, video/TV production, digital, broadcast, industrial, post production http://www.cabiriafilms.com Cabiria Films, Prague: Filming in East Europe – locations & production services Cambridge Films: an independent production company http://www.cinedictum.com Cinedictum: a production company which produces cinedicta. Described as a form of film-aphorism, cinedicta are very short films whose concise narrative holds both entertainment and moral value, while addressing universal themes http://www.commercialfactory.comThe Commercial Factory: specializing in the production of high-quality television commercials, from the original idea to broadcast ready http://www.cotenfilms.comCoten Films: an independent film production company specialising in corporate and private video work, Web design and new media. Responsible for the action comedy feature film "Cop on the Edge IX" and the forthcoming "Days' End" http://www.crystalpyramid.comCrystal Pyramid: broadcast video production company in San Diego, California http://www.homestead.com/degalazare/dlp.htmlDega Lazare Productions: movies and other multimedia productions being made in the small town of Kahnawake by teens. From action/adventure to horror and comedy, it's all there http://www.dereko.tvDereko Entertainment: a small, independent and privately held feature film production company based in Los Angeles, California. Whose goal is to produce and release one or more feature films per year, both domestic/international territories Documentary Educational Resources (DER): produce, distribute and promote anthropological and documentary films and videos http://www.doublegproductions.comDouble G Video Productions: a video productions company providing a wide range of service and talent bank for your productions needs. "From gold to gold let Double G video productions get your story told!" http://www.egygrip.comEgygrip: a skilled team of professionals based in Egypt, and capable of managing every step of the video or film production process from concept to compeletion Emerald Oceans Entertainment: a multi-media company with film and music divisions. Founded in 1995 as a film production company it has evolved into its current broader base, which is helping it establish its place in the industry Eye Light Media: creating films, videos, music and Web sites from a Christian world view The Farnham Film Company: a UK-based TV production company interested in co-production–particularly of children's programming http://www.angelfire.com/film/file5home/about.htmlFile5 Productions: producer of market-specific sports videos by writer-director-actor David Lima http://www.filmforum.comFilm Forum: New York's leading movie house for independent premieres and repertory programming http://www.fireflyonline.comFirefly Entertainment: established in 1994 to allow aspiring talents and interested persons to achieve their goals in film, television, and theatre. The group has won multiple awards, is comprised of members of all ages, and is based in west central Pennsylvania http://www.footlooseproductions.com/Footloose Productions: film and video production company specializing in documentaries, commercial films, photo shoots, movies, and music videos http://www.fourhorsemenfilm.com/Four Horsemen Films, LLC: an independent film production company in New Jersey http://www.angelfire.com/movies/gmcproductions/gmc.htmGMC Productions: teenage independent film makers on a low budget. See screening room with video clips, and check out past films Goldader Film Productions GmbH: creates and produces feature films, TV movies, commercials, music videos, 3-D animated shorts, interactive CDs and DVDs, educational and corporate films, CDs and DVDs Gulliver Media Australia: producing award-winning television documentaries and videos Harrington Productions: content creators for video, film and new media. Based in Maui, Hawaii, they supply field production packages, crew and post production. Client list includes ABC-Sports, ESPN, E! Entertainment, NBC, BBC and The Discovery Channel http://go.to/headscrewHeadscrew: working entirely in the film medium, they provide affordable commercial shoots for local Seattle businesses, create traditional clay, cel, line and computer animations and also stage location shoots for studios who are unable to re-locate a full crew for short periods of time http://www.focusfilms.comHocus Focus Films, Israel: Filming in a foreign country could sometime become a metaphysic experience. In Israel, life itself is. To cut Red Tape, achieve Green Lights, and avoid Blue Holes. Contact a production house that can accommodate all your needs http://www.hollywoodpa.comHollywood PA: the world's first Global Movie Set. This is an independent film, shot in Central Pennsylvania. You were able to watch it live from the set, interact with the cast and crew and discover the passion and pain in filmmaking http://www.iconent.comIconoclastic Entertainment: dedicated to finding and creating the finest screenplays on the planet http://www.imageproducers.comImage Producers: a full service video and multimedia production company working on a local, regional, national, and international basis. Their creative staff works together to develop the concept, write the script, shoot the footage, and take the project through post-production to deliver the finished product http://www.ipcfilms.comIPC Films: IPC is a production company looking for ideas, projects, scripts, talent, and investors http://www.jam-productions.comJam Productions a San Francisco Bay Area video/film company that does broadcast quality commercials, special event filming, indie film projects, multi-media and more http://www.jamsessionfilms.comJam Session Productions: a minority/woman-owned midwest-based film and multimedia company whose projects have included music videos, commercials and PSA's, training films, industrial films, TV program segments and more Janson Media: an international program sales and distribution company, a "content" company. We have licensed programming to over 180 countries around the world. Please see our Clients page, for a fairly complete list of the broadcasters and cable and satellite networks to whom we license programming http://www.jetifilms.comJeti Films: an independent film company based in Louisiana http://www.kaizenfilms.comKaizen Films: their mission is to develop new technologies and techniques to enhance the production of motion pictures, while maintaining cinema as an art form http://www.kineticimage.comKinetic Image Co., Ltd.: an Ohio-based motion picture production company that, for nearly twenty years, have specialized in creating exciting motion picture entertainment on budgets that would shame a cat. They created a number of well-received cult items which have graced the schedules of the USA Network and Cinemax http://www.kiwifilm.comKiwi Film & Video, Asia: a Hong Kong and Singapore based film and video production service company catering to a broad range of clients from around the world; fully-equipped camera crews is their specialty http://www.ltfilms.comLarry Taylor Productions: dedicated to providing creative projects for family entertainment, including movies and television programs, as well as the construction of a new and unique style of theme park. The vision: To put the heart into every picture. http://www.leafpile.tvLeaf Pile TV: Tune In: This TV variety program is filled with a swarm of segments composed of local events and artist interviews which provide musical entertainment and hilarious sketch comedy. Leaf Pile also has freelance videography for your major rock video or demo. Check out our exclusive camera packaging http://www.littlerickyproductions.comLittle Ricky Productions: feature films that reach the moral conscience of America http://www.mecfilms.comMatrixx Entertainment: The World's First Virtual Movie Studio(tm). Services include: producing, financing and distributing independent feature films; Web site, production and legal consulting for entertainment clients; books and manuals on filmmaking and more Media Movers,Inc.: full service localization company offering services in dubbing,subtitling,voiceovers & production in Asian, Indian & European http://members.aol.com/mptvMPTV: offering on-location video production, graphics and animation design, AVID video post production, Macromedia Director authoring, and many more services http://www.mptv.commptv.com: Film, video and audio production and distribution http://www.mundiali.comMundiali Entertainment: providing a venue for the production of lower cost motion pictures ($15 and $20 million each) and television programming (based on a cooperative agreement between Mundiali and either a television network or special project investors) http://members.tripod.com/%7EOverboardProductionsOverboard Productions: an independent film production copmpany headed up by Matt Fore http://www.angelfire.com/ga/PARALLELAFTERNOONParallel Afternoon Productions: independent thinkers with a vision that strives to be unequaled http://www.peacerecord.comPeace Record Company: a multi-faceted audio/video production company offering video editing, acting video demo production, video/audio tape duping, video projection and sound systems rentals, wedding videos, on location multi-camera video recordings of special events and more http://www.phproductions.comPH Productions: services include business and personal consulting and coaching, project development, script writing, video production, video biographies, television programs, infomercials, commercials, photography and 3-d animation http://www.psavideo.comProduction Services Arizona: since 1971, providing quality, production services in the areas of video, multimedia, and animation graphics. Serving clients worldwide from Korea to France, South America to Canada in medium to high budget corporate marketing and training venues. Full collateral support through PS/A's graphics dept. Rawbass: design and production of all types of artistic media http://www.rcwmediaworks.comRCW Media Works: an independent production company that realizes that it is not the size of your budget that determines quality, it is the dedication and heart that you put into your projects http://www.realitycrash.comReality Crash Productions: showcases original and creative projects from writers, artists, film makers and critics. They are looking for people to contribute to the site. You retain full rights for your work and a web page is provided for you http://www.revivalentertainment.com/Revival Entertainment: this team is producing films of the highest quality in Surrey England http://www.riggedproductions.comRigged Productions: film and video, cartoons and art, writing, music and audio, and other works http://www.riverproductions.comRiver Productions: an independent film company located in Los Angeles, CA, headed by Michael J. Isgrig (writer, director, producer), Lynn C. Grant (writer, producer) and Kym R. Wulfe (executive producer, head of business and legal affairs) http://www.roman-pictures.comRoman Pictures: a motion picture production company which primarily produces "budget-controlled" feature-length movies that are licensed for distribution and exploitation in the direct-to-video, cable, TV and satellite markets http://www.runningdogfilms.co.ukRunning Dog Films: a new British film company dedicated to making films using cheap and affordable technology combined with proven no/lo budget production practices http://www.shadesofday.comShades of Day: the art of independent film and video producing. Extensive database of cinema related resources http://www.sharpshootertv.comSharpshooter Worldwide: a television production company that specializes in on location filming, any where in the world. Their motto is: "We don't go after awards or publicity. We just do the work." http://www.smileycrew.comSmiley Crew Productions: a California-based film crew specializing in both TV and film. Their main agenda focuses on their popular cable access comedy show, and their pro creative, anti "trend" statements http://www.smorgasbordproductions.comSmorgasbord Productions: a small company involved in the production of multimedia. Film, video, animation, graphic art and comic books are their products Starsmead Production Ltd: comprehensive production services for television and film http://www.studiosatlascolinas.comThe Studios at Las Colinas: a full-service production and entertainment facility located in the heart of the Dallas/Fort Worth Metroplex; offering complete music, film, video, and multimedia production capabilities, as well as parties and events hosting http://www.suedeinteractive.comSuede Interactive: an in-house production facility (located in the NY Metro area) for radio and TV commercials, audio/video/film productions and Internet services (Web site design, search engine placement, e-commerce and hosting) http://www.tafproductions.comTAF Productions: an independent production company, based in the Netherlands, that specializes in executive and unit production services. Additionally, they create their own screen productions Tangled Web Productions: a feature film production company that writes, directs, and produces their own projects. They currently have four projects in development http://www.telenet.bc.caTelenet Communications: video, audio and multimedia production using DV cameras, non-linear editing software and audio foley Terrazas Video: Southern Arizona's largest production facility. Film, video, grip, lighting and stage. Visit their Web site for a complete list of resources TEWS Entertainment: founded by Tim Sullivan and Erik Woods in 1995, responsible for "Of Fortune and Glory," winner of the Best Picture award at the 2000 REwind Video Awards in Calgary http://www.thrae.comThrae Entertainment: your source for no-budget moviemaking on the Web. Provides information and insight into the world of movies without the burden of large financial resources, a place for moviemakers to share their experiences and information about their films http://www.torontopictures.comToronto Pictures: a production company, with its own film-school. Under the leadership of internationally-awarded film director, writer and producer Bruno Pischiutta, they specialize in producing feature films, documentaries and TV series http://www.transworldvideo.comTransworld Video Productions: from idea to shrink wrap; Cable TV to Network. Duplications and conversions to the world formats: NTSC, PAL, SECAM http://www.twodollarpistol.comTwo Dollar Pistol Films: specializing in the writing and production of independent feature films, shorts and documentaries and providing a wide array of digital production services for independent, private and corporate projects http://www.unknownproductions.comUnknown Productions: independent movie production with distribution from Cinematrix releasing, giving the world another entertainment choice http://1aindfilm.twoffice.comVariety Plus Enterprises, Inc.: serving the lower Westchester and New York City community since 1984. They specialize in creating stories, screenplays, and feature length motion pictures http://www.waterfrontchicago.comWaterfront Productions: a Chicago, Illinois-based production company that shoots and edits complete projects on film and video. Separate packages are available for just shooting or editing, if needed http://www.whodat.comWho Dat Music Productions: in Astoria, New York, is the developer of the Who Dat AudioLogo® brand identity for the Internet. We have produced elements for CD-ROM, DVD, Streaming Media for the Internet, Web Site Developers, Multimedia Productions, Interactive Productions, Original or Library Music for Film and Video, Narrators and Voice Over Talent, Web Casting, Corporate Presentation and the entire production if necessary http://www.worldwidefilmworks.comWorld Filmworks: a company designed to create musical/theatre productions, music videos, commercials, and short films, with an eye toward the ever-increasing presence of the Internet as the future of distribution http://www.youngmankang.comYoung Man Kang Films: a writer/director with more than 20 films and more than 50 TV commercials in his portfolio http://www.zone5pictures.comZone 5 Pictures: the source for all of your business media needs, including film and video production, studio photography, Web development, graphic design, feature films and animation/3D

Message
1...252627

Courses matching "Systems"

Show all 441

Temporary Works Supervisor (TWS)

By SMC Safety Solutions

The Temporary Works Supervisor course will provide you with knowledge of the role. You will also gain a good understanding of risk management on a temporary works site. Course Objectives: By the end of the course, the delegate will gain knowledge of: Have gained an understanding of the importance of cooperation and teamwork on a temporary works site Understand the legal duties of the role Have a stronger awareness of risk management on-site as well as the roles of a supervisor and their fellow employees on site Leave the course with an understanding of the “4C’s”, Communication, Cooperation, Coordination and Competency Course Content: Different groups and types of Temporary Works BS5975:2019 CDM Regulations Legislation and Codes of Practice Temporary Works Register, Design Brief and Design Case studies, policy and procedures, Standard solutions and permitted drawings Risk assessments, method statements Safe systems of work The roles and duties of a Temporary Works Supervisor Assessment: To successfully complete the course, you will need to get 72% or above in the final exam. The trainer encourages the delegates to be interactive and involved throughout the training. Certificate: The certificate for this course is valid for 5 years. Instructions Please note all Temporary Works Supervisor courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

Temporary Works Supervisor (TWS)
Delivered in Stratford + 1 more or Online + more
£219

Human Resource Management 1 Day Training in London

By Mangates

Human Resource Management 1 Day Training in London

Human Resource Management 1 Day Training in London
Delivered In-Person + more
£595 to £795

Human Resource Management 1 Day Training in Bromley

By Mangates

Human Resource Management 1 Day Training in Bromley

Human Resource Management 1 Day Training in Bromley
Delivered In-Person + more
£595 to £795

Human Resource Management 1 Day Training in Heathrow

By Mangates

Human Resource Management 1 Day Training in Heathrow

Human Resource Management 1 Day Training in Heathrow
Delivered In-Person + more
£595 to £795

Summer Fast Track 2025 - Organisation & Relationship Systems Coaching Training

By CRR UK

CRRUK equips professionals with the concepts, skills and tools to build conscious, intentional relationships, and to coach relationship systems of any size.

Summer Fast Track 2025 - Organisation & Relationship Systems Coaching Training
Delivered In-Person in London + more
£5,920

Electrical Generators, Excitation Systems and Governing Systems

By EnergyEdge - Training for a Sustainable Energy Future

About this Training Course This 5 full-day course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVRs), governing systems, and protective systems. The focus will be on maximizing the efficiency, reliability and longevity of these equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance. The emphasis of this course is on protective systems, inspection methods, diagnostic testing, troubleshooting, modern maintenance techniques, refurbishment, rewind and upgrade options, as well as advanced methods for preventing partial discharge and other failures. Training Objectives Equipment Operation: Gain a thorough understanding of the operating characteristics of generators, exciters, AVR's and protective systems Equipment Diagnostics and Inspection: Learn in detail all the diagnostic techniques and inspections required of critical components of generators, exciters, AVR's and protective systems Equipment Testing: Understand thoroughly all the tests required for the various types of generators, exciters, AVR's and protective systems Electrical Generator Protective Systems: Gain a thorough understanding of all Electrical generator protective systems including: all electrical relays, tripping mechanisms, protective systems for negative phase sequence (unbalance loading), loss of excitation, over fluxing protection (over-voltage and underfrequency), reverse power (generator monitoring), over-speeding, pole slipping / out of step (sudden increase in torque or weakness in excitation), Class A protection, Class B protection Equipment Maintenance and Troubleshooting: Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of generators, exciters, AVR's and protective systems Equipment Repair and Refurbishment: Gain a detailed understanding of the various methods used to repair and refurbish generators, exciters, AVR's and protective systems Equipment Rewind and Upgrade Options: Discover all options available to rewind and upgrade the generator rotor and stator to enhance the output and reduce downtime Efficiency, Reliability, and Longevity: Learn the various methods used to maximize the efficiency, reliability, and longevity of generators, exciters, AVR's and protective systems Advanced Methods to Prevent Failure: Gain a thorough understanding of all the methods used to prevent partial discharge, and other failures in generators, exciters, AVR's and protective systems Equipment Sizing: Gain a detailed understanding of all the calculations and sizing techniques used for generators, exciters, AVR's and protective systems Design Features: Understand all the design features that improve the efficiency, reliability of generators, exciters, AVR's and protective systems Equipment Selection: Learn how to select generators, exciters, AVR's and protective systems by using the performance characteristics and selection criteria that you will learn in this course Equipment Enclosures and Sealing Methods: Learn about the various types of enclosures and sealing arrangements used for generators, exciters, AVR's and protective systems Equipment Commissioning: Understand all the commissioning requirements for generators, exciters, AVR's and protective systems Equipment Codes and Standards: Learn all the codes and standards applicable for generators, exciters, AVR's and protective systems Equipment Causes and Modes of Failures: Understand causes and modes of failures of generators, exciters, AVR's and protective systems System Design: Learn all the requirements for designing different types of generators, exciters, AVR's and protective systems Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals Course Level Basic or Foundation Training Methods Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Each delegate will receive a copy of the following materials written by the instructor: ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages) Generator Inspection, Testing, Maintenance, Protective Systems and Refurbishment Manual (this manual covers all the inspection and maintenance activities as well as all protective systems required for generators - 400 pages) Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Electrical Generators, Excitation Systems and Governing Systems
Delivered in Internationally or OnlineFlexible Dates
£3,009 to £3,499

Java Bootcamp | 8 weeks | 8 lessons

4.6(12)

By PCWorkshops

Full stack, in-depth, comprehensive in classroom 2 month training on Java programming. 1 lesson a week; the other days you work on your own on structured homework and are supported with a 1-1 mentor.

Java Bootcamp | 8 weeks | 8 lessons
Delivered In-Person in London
£880

Securing UNIX systems

5.0(3)

By Systems & Network Training

Securing UNIX systems training course description This course teaches you everything you need to know to build a safe Linux environment. The first section handles cryptography and authentication with certificates, openssl, mod_ssl, DNSSEC and filesystem encryption. Then Host security and hardening is covered with intrusion detection, and also user management and authentication. Filesystem Access control is then covered. Finally network security is covered with network hardening, packet filtering and VPNs. What will you learn Secure UNIX accounts. Secure UNIX file systems. Secure UNIX access through the network. Securing UNIX systems course details Who will benefit: Linux technical staff needing to secure their systems. Prerequisites: Linux system administration (LPIC-1) Duration 5 days Securing UNIX systems course contents Cryptography Certificates and Public Key Infrastructures X.509 certificates, lifecycle, fields and certificate extensions. Trust chains and PKI. openssl. Public and private keys. Certification authority. Manage server and client certificates. Revoke certificates and CAs. Encryption, signing and authentication SSL, TLS, protocol versions. Transport layer security threats, e.g. MITM. Apache HTTPD with mod_ssl for HTTPS service, including SNI and HSTS. HTTPD with mod_ssl to authenticate users using certificates. HTTPD with mod_ssl to provide OCSP stapling. Use OpenSSL for SSL/TLS client and server tests. Encrypted File Systems Block device and file system encryption. dm-crypt with LUKS to encrypt block devices. eCryptfs to encrypt file systems, including home directories and, PAM integration, plain dm-crypt and EncFS. DNS and cryptography DNSSEC and DANE. BIND as an authoritative name server serving DNSSEC secured zones. BIND as an recursive name server that performs DNSSEC validation, KSK, ZSK, Key Tag, Key generation, key storage, key management and key rollover, Maintenance and resigning of zones, Use DANE. TSIG. Host Security Host Hardening BIOS and boot loader (GRUB 2) security. Disable useless software and services, sysctl for security related kernel configuration, particularly ASLR, Exec-Shield and IP / ICMP configuration, Exec-Shield and IP / ICMP configuration, Limit resource usage. Work with chroot environments, Security advantages of virtualization. Host Intrusion Detection The Linux Audit system, chkrootkit, rkhunter, including updates, Linux Malware Detect, Automate host scans using cron, AIDE, including rule management, OpenSCAP. User Management and Authentication NSS and PAM, Enforce password policies. Lock accounts automatically after failed login attempts, SSSD, Configure NSS and PAM for use with SSSD, SSSD authentication against Active Directory, IPA, LDAP, Kerberos and local domains, Kerberos and local domains, Kerberos tickets. FreeIPA Installation and Samba Integration FreeIPA, architecture and components. Install and manage a FreeIPA server and domain, Active Directory replication and Kerberos cross-realm trusts, sudo, autofs, SSH and SELinux integration in FreeIPA. Access Control Discretionary Access Control File ownership and permissions, SUID, SGID. Access control lists, extended attributes and attribute classes. Mandatory Access Control TE, RBAC, MAC, DAC. SELinux, AppArmor and Smack. etwork File Systems NFSv4 security issues and improvements, NFSv4 server and clients, NFSv4 authentication mechanisms (LIPKEY, SPKM, Kerberos), NFSv4 pseudo file system, NFSv4 ACLs. CIFS clients, CIFS Unix Extensions, CIFS security modes (NTLM, Kerberos), mapping and handling of CIFS ACLs and SIDs in a Linux system. Network Security Network Hardening FreeRADIUS, nmap, scan methods. Wireshark, filters and statistics. Rogue router advertisements and DHCP messages. Network Intrusion Detection ntop, Cacti, bandwidth usage monitoring, Snort, rule management, OpenVAS, NASL. Packet Filtering Firewall architectures, DMZ, netfilter, iptables and ip6tables, standard modules, tests and targets. IPv4 and IPv6 packet filtering. Connection tracking, NAT. IP sets and netfilter rules, nftables and nft. ebtables. conntrackd Virtual Private Networks OpenVPN server and clients for both bridged and routed VPN networks. IPsec server and clients for routed VPN networks using IPsec-Tools / racoon. L2TP.

Securing UNIX systems
Delivered in Internationally or OnlineFlexible Dates
£4,997

Securing Linux systems

5.0(3)

By Systems & Network Training

Securing Linux systems training course description This course teaches you everything you need to know to build a safe Linux environment. The first section handles cryptography and authentication with certificates, openssl, mod_ssl, DNSSEC and filesystem encryption. Then Host security and hardening is covered with intrusion detection, and also user management and authentication. Filesystem Access control is then covered. Finally network security is covered with network hardening, packet filtering and VPNs. What will you learn Secure Linux accounts. Secure Linux file systems. Secure Linux access through the network. Securing Linux systems training course details Who will benefit: Linux technical staff needing to secure their systems. Prerequisites: Linux system administration (LPIC-1) Duration 5 days Securing Linux systems training course contents Cryptography Certificates and Public Key Infrastructures X.509 certificates, lifecycle, fields and certificate extensions. Trust chains and PKI. openssl. Public and private keys. Certification authority. Manage server and client certificates. Revoke certificates and CAs. Encryption, signing and authentication SSL, TLS, protocol versions. Transport layer security threats, e.g. MITM. Apache HTTPD with mod_ssl for HTTPS service, including SNI and HSTS. HTTPD with mod_ssl to authenticate users using certificates. HTTPD with mod_ssl to provide OCSP stapling. Use OpenSSL for SSL/TLS client and server tests. Encrypted File Systems Block device and file system encryption. dm-crypt with LUKS to encrypt block devices. eCryptfs to encrypt file systems, including home directories and, PAM integration, plain dm-crypt and EncFS. DNS and cryptography DNSSEC and DANE. BIND as an authoritative name server serving DNSSEC secured zones. BIND as an recursive name server that performs DNSSEC validation, KSK, ZSK, Key Tag, Key generation, key storage, key management and key rollover, Maintenance and resigning of zones, Use DANE. TSIG. Host Security Host Hardening BIOS and boot loader (GRUB 2) security. Disable useless software and services, sysctl for security related kernel configuration, particularly ASLR, Exec-Shield and IP / ICMP configuration, Exec-Shield and IP / ICMP configuration, Limit resource usage. Work with chroot environments, Security advantages of virtualization. Host Intrusion Detection The Linux Audit system, chkrootkit, rkhunter, including updates, Linux Malware Detect, Automate host scans using cron, AIDE, including rule management, OpenSCAP. User Management and Authentication NSS and PAM, Enforce password policies. Lock accounts automatically after failed login attempts, SSSD, Configure NSS and PAM for use with SSSD, SSSD authentication against Active Directory, IPA, LDAP, Kerberos and local domains, Kerberos and local domains, Kerberos tickets. FreeIPA Installation and Samba Integration FreeIPA, architecture and components. Install and manage a FreeIPA server and domain, Active Directory replication and Kerberos cross-realm trusts, sudo, autofs, SSH and SELinux integration in FreeIPA. Access Control Discretionary Access Control File ownership and permissions, SUID, SGID. Access control lists, extended attributes and attribute classes. Mandatory Access Control TE, RBAC, MAC, DAC. SELinux, AppArmor and Smack. etwork File Systems NFSv4 security issues and improvements, NFSv4 server and clients, NFSv4 authentication mechanisms (LIPKEY, SPKM, Kerberos), NFSv4 pseudo file system, NFSv4 ACLs. CIFS clients, CIFS Unix Extensions, CIFS security modes (NTLM, Kerberos), mapping and handling of CIFS ACLs and SIDs in a Linux system. Network Security Network Hardening FreeRADIUS, nmap, scan methods. Wireshark, filters and statistics. Rogue router advertisements and DHCP messages. Network Intrusion Detection ntop, Cacti, bandwidth usage monitoring, Snort, rule management, OpenVAS, NASL. Packet Filtering Firewall architectures, DMZ, netfilter, iptables and ip6tables, standard modules, tests and targets. IPv4 and IPv6 packet filtering. Connection tracking, NAT. IP sets and netfilter rules, nftables and nft. ebtables. conntrackd Virtual Private Networks OpenVPN server and clients for both bridged and routed VPN networks. IPsec server and clients for routed VPN networks using IPsec-Tools / racoon. L2TP.

Securing Linux systems
Delivered in Internationally or OnlineFlexible Dates
£3,697

Networking Microsoft Systems

5.0(3)

By Systems & Network Training

Networking Microsoft Systems course description A hands-on course covering the network aspects of Microsoft systems. The course progresses from basic TCP/IP tools and configuration settings through to advanced security considerations finishing with an overview of Exchange and IIS. Hands on sessions are based on a choice of Windows Server 2003 or Windows 2000 server and Windows XP or Windows 2000 professional. Customised versions with other Microsoft platforms are also available. What will you learn Design networks with consideration for Microsoft issues such as logons. Design, configure and troubleshoot TCP/IP, DNS, WINS and DHCP. Configure security features such as PKI and IPSec. Describe the Windows TCP/IP implementation details. Networking Microsoft Systems course details Who will benefit: Anyone working with Microsoft systems. Prerequisites: TCP/IP foundation for engineers Supporting Windows ( XP or 2000 or 2003) Duration 5 days Networking Microsoft Systems course contents Configuring network cards PnP, resources, Ethernet cards, wireless cards, dial up networking, other cards, Ethernet settings, layer 2 QoS. Configuring and supporting IP Basic IP settings, advanced IP settings, advanced TCP settings, DrTCP and registry settings, security DHCP DHCP server, authorising the DHCP service, DHCP client, DHCP relays, Address pools, options, lease duration's, Integrating with DNS. Microsoft networking overview Workgroups and domains, Domain controllers, the logon process in a network, the role of Active Directory, synchronisation, protocol stacks and bindings. Accessing file and print resources Shared folders, permissions, network printers, browsing, NetBIOS, SMB. WINS Servers, clients, Client registration, renewing and releasing of names. NetBIOS node types. DNS1 Overview, Primary and secondary servers, DDNS, zones, resource records. The browser service Master, backup and other browser roles, elections, announcements, recovery from failure, Inter subnet browsing. TCP/IP implementation details Dead gateway detection, Multi homing, multicasting, MTU path discovery, registry settings, QOS and RSVP, Windows as a router, performance implications of Microsoft services. Internet Access Options, NAT, Firewall capabilities and Proxy server, Internet Authentication Service. Remote Access Installing, RAS servers. RAS process, protocols Security: PKI PPTP, L2TP, What is IPSec, configuring IPSec. Security: VPNs PPTP, L2TP, What is IPSec, configuring IPSec. Other Microsoft networking services & tools Netmeeting, instant messaging, white boarding, document collaboration, video conferencing Microsoft Exchange, IIS, Directory replication, SNMP, Net Monitor, integration with other platforms.

Networking Microsoft Systems
Delivered in Internationally or OnlineFlexible Dates
£3,697
Show all 441

Search By Location