547 Educators providing Print courses delivered Online

Name: ONE SPACE LEFT! 3rd September Francesca Riccardi #Agent121. Looking for: ADULT FICTION
Price: 72 GBP
Availability: InStock

Print Online

tutor stream

London

Introduction The TutorStream Website helps Students to find Tutors, Tutors to market their services, and for Students to book and pay for Lessons. All of these terms and conditions apply to Students and Tutors, unless they specifically state otherwise, or are marked with a "T", when they only apply to Tutors. Clause 5 only applies to Tutors. These terms and conditions replace any previous versions of them. The TutorStream Website is owned and operated by Tutor Stream Ltd, trading as TutorStream. TutorStream is a limited liability company registered in England and Wales under company number 12338203. TutorStream's registered office is at Kemp House, 152-160 City Road, London, EC1V 2NX United Kingdom. TutorStream's other contact details are set out on the Website, which is at https://TutorStream.net. A User may register on the Website as a Student or as a Tutor. A User may use the Website without registering, but if a User does register, certain information will be stored, making future visits to the Website easier. By registering on or using our Website, the User agrees to be bound by these terms and conditions. These terms and conditions are legally binding – every User should read them fully before agreeing to them. (Please print or save these terms for future use as TutorStream will not keep a file copy specifically for the User and TutorStream cannot guarantee that they will remain accessible on the Website in future.) If a User does not wish to be bound by these terms, they should not use the Website. ("T") Where the person who agrees these terms and conditions contracts on behalf of a company/organisation, they hereby confirm that they have authority to act on behalf of that entity. Certain words are defined in clause 16 (Definitions) of these terms and conditions and are capitalised throughout. TutorStream Rights & Responsibilities This clause sets out what TutorStream promises to do: To help Tutors and Students to meet by allowing Tutors to advertise their professional tuition services on the Website, and Students to book and pay for Lessons To maintain a functioning Website, including communication systems, a booking platform and Online Classroom, wherever possible. TutorStream cannot guarantee that the Website will always be available, or that it will always work, but it will try to have it up and running properly at all times. Every now and again, the Website might need to be taken offline for maintenance purposes. To communicate any planned maintenance of the Website or Platform downtime. To use reasonable endeavours (which means to try hard!) to keep the Website free from viruses and worms. To use reasonable endeavours to check the identity of all Tutors and the background checks of Tutors who have Background Checked Status. (But if a Student is concerned about any Tutor, do not meet a Tutor alone.) To decide when a Tutor’s profile is sufficiently complete to be set live on the Website and be accessible by other Users. To communicate new Bookings, confirmation of Bookings and cancellations, to both Students and Tutors via the Website and by email (except where a Student or Tutor has chosen to alter their notification settings to exclude email communication). To endeavour to ensure that each Student’s payment of Lesson Fees and the payment of each Tutor’s Tutor Fees are processed promptly and usually within 9 days of a Lesson, when there is no Complaint or Failed Payment. To endeavour to ensure Complaints are considered promptly and in accordance with these terms and conditions. To endeavour to ensure that refunds to Students are made promptly in accordance with these terms and conditions. To endeavour to ensure that Failed Payments are processed promptly and in accordance with these terms and conditions. To take precautions TutorStream considers appropriate to protect Students' and Tutors' information. To monitor postings made on the Website and messages sent between Students and Tutors. TutorStream does so in the hope of helping Students and Tutors meet, but also to stop misuse of the Website, as set out in these terms and conditions.

Message

istudy uk

We understand more than anyone how important it is for you to get the right qualifications at the right time. We also understand that when you have a lot to do, you might not always have the time free to go to a place of study. That is why we created this site, so you can take all the time you need to learn more about your chosen topics as well as be able to do the whole thing from home. We believe in empowering people by offering them opportunities to expand and extend their knowledge and skill set as well as giving them the support they need to achieve great things. With thousands of courses available and a team who will do just about anything to help you, it is safe to say that you will not find a better course provider on the internet and so we would love to work with you to make sure that you get the best experience and best results out of your education. WHAT WE DO Here at iStudy we provide a range of online training courses for those who want to gain new skills, and qualifications and update their knowledge. iStudy training courses are delivered entirely online through our sophisticated student learning portal. The student learning portal is an online learning management system that allows students to study for their courses online. This innovative technology means there is no need to attend any classes or take time off work to study. Professionally accredited courses All our courses are delivered in partnership with nationally recognised awarding bodies so be assured that what you learn with us matters when it comes to achieving your career goals. Study that suits you You do not have to give up your job or your life to get a new qualification, you can learn anytime, anywhere.

Message

compete high

London

Compete High: Your #1 Destination for Skill Development. Explore diverse range of courses to boost your expertise, outshine your competition, and fly high in your career.

Message

home education uk

London

For most, home education is far more like university than school. It's about curiosity. Formulating a question or thought and researching it. The parents roll is not to formally teach but to facilitate that journey. It doesn't really matter too much what the child is curios about, the trick is to develop and facilitate curiosity, kindle it like a precious flame, and ultimately develop those critical thinking skills necessary to formulate new ideas for so it becomes a raging inferno. That sounds complicated perhaps, but it's really not. It's what all parents do for their children especially when they're small. Every time a child asks a question you start a journey of discovery. If parents see themselves not as teachers but as facilitators in this way, they will see progress they didn't imagine possible. It's exciting and fun but it can also be scary. Scary because as a parent you've been led to believe children need to be steered along a certain path, that there's a set of knowledge all children should have. But if that's not the child's path, or if it's a part of a journey your child has not yet encountered, you're effectively imposing ideas on the child and run the risk, along side millions of other children, of alienating your child from the learning process, suppressing their own intrinsic curiosity for the imposed ideas of others. How often has a child asked "what's the point in this?" Far too many I suspect. Spark a child's curiosity, facilitate their journey of discovery, put the child behind the wheel and they will take responsibility for their own course and progress, because they will be intrinsically motivated to satisfy their curiosity. For the overwhelming majority of parents, this is the beauty of home education. By answering questions they themselves pose, they retain what they learn because it's part of their own journey. Something they questioned themselves. Covid-19 Home Schooling Support We have created a support section entirely for those caught up in the covid crisis. We also have a FB Forum just for you. Experienced home educators are on hand to welcome you and help with issues relating to your child's education at home. We can't promise to answer every question, but many of the issues you will face will already have been dealt with by home educators who are the experts in educating in the home. The group is the Home Education UK School Closure Support Forum. now with over five thousand members The Supremacy of the Family - & Why. “The totalitarian state tries to separate the child from her family and mould her to its own design. Families in all their subversive variety are the breeding ground of diversity and individuality. Hence the family is given special protection in all the modern human rights… The child is not the mere creature of the State.” Baroness Hale, President of the Supreme Court 11th June 2008 LG Ombudsman rules against routine visits The Local Government Ombudsman ruled that councils must be clear with parents of home educated children whether a home visit is routine or triggered by concerns following Leicester City's attempt to initiate actions based on anticipating, future government proposals currently being considered Download a Free Poster Many parents remain unaware that home education is legal, or if they are aware, where to find support. This poster could be put up anywhere parents and children might benefit. a3 poster download Download a poster today, print it, pin it. Help other children learn freely A4 Poster download Educational Heretics Press EHP publishes books and kindles on many topics related to home education and learning systems that are alternative or complimentary to state schooling. Including books on how and why home educators home educate. book cover A great introduction to alternative education. Many EHP books are available as Kindles, at low prices and you don't need a kindle to read them, there are app's for all brands of smart phone and tablet. Build your own library of 'read anywhere Home Education - a Human Right "The respect of parent's freedom to educate their children according to their vision of what education should be has been part of international human rights standards since their very emergence." (The Special Rapporteur to the United Nations Commission on Human Rights 8th April 1999) Parents are responsible for the education of their offspring regardless of whether they are in school or out of it. In law the right to an education is an obligatory right, it may neither be denied to, nor refused by, a child. Thus since children may not refuse education and there is no academic consensus on what constitutes an effective education, we believe that the state must be flexible in defining what a 'suitable' education is. While the law expresses the right to home educate as a parental right, it is my belief that, in the same way that young people have the right to decide upon medical procedures, a specific education should not be imposed upon them. This is not only right in principle but in practice, since intrinsically motivated learning will most readily "achieve that which it sets out to achieve". Learning cannot be imposed.

new scientist

London

New Scientist is the world’s most popular weekly science and technology publication. Our website, app and print editions cover international news from a scientific standpoint, and ask the big-picture questions about life, the universe and what it means to be human. If someone in the world has a good idea, you will read about it in New Scientist. Since the magazine was founded in 1956 for “all those interested in scientific discovery and its social consequences”, it has expanded to include newsletters, videos, podcasts, courses and live events in the UK, US and Australia, including New Scientist Live, the world’s greatest festival of science. New Scientist is based in London, UK, with offices in the US and Australia. New Scientist magazine In a time when facts are in short supply, there has never been a greater need for a trusted, impartial source of information about what is going on in the world – or a greater need for inspiration through exceptional ideas. From artificial intelligence to climate change, from the latest innovations in health to the mysteries of quantum physics and the human mind, New Scientist covers the ideas and innovations that matter. We talk to researchers at the cutting edge, separate fact from fiction and distil it all into an intelligible, need-to-know digest. News New Scientist covers the latest news from all areas of science, from the covid-19 pandemic to space travel and quantum physics. We provide a balanced, impartial viewpoint on the biggest stories as they happen to give you the facts you need. With news articles added to the New Scientist website daily and the largest stories covered in the magazine every week, you are always up to date. Features In every issue of New Scientist, you get exclusive features that dive deep into the most interesting new developments, from the origins of humanity to health and technological advances. Written by specialists in the field, these features present the latest developments in an accessible way, so you don’t have to be an expert to enjoy them. Subscribers have access to all of our magazine features on our website and app, so you can stay informed wherever you are. Subscriber-only events A New Scientist subscription gives you exclusive access to four free virtual subscriber-only events per year. Previous events have included New Scientist’s Christmas special and Reporting a Pandemic, both of which are available on demand. These events see our editorial team delve into the topics that matter most to you. Virtual events New Scientist also runs other virtual events and evening lectures throughout the year where celebrated experts discuss the most interesting subjects from all branches of science. These events and one-day masterclasses will help you truly understand the world around you and discover brand new areas of interest. In addition, subscribers have access to exclusive digital events throughout the year for even more great content. Newsletters Get the best of New Scientist delivered straight to your desktop, phone or tablet with our weekly newsletter and series of themed newsletters on health, climate and more. We are continually growing our newsletter collection and are delighted to have introduced three more newsletters in 2021 to date. Video Discover hundreds of inspirational and entertaining videos about everything from how vaccines work to what it would be like to fall into a black hole. Subscribe to our Science with Sam explainer series on YouTube, catch up with the latest researcher videos or watch in-depth interviews with the world’s top scientists. Podcasts Keep up to date with the latest science news on the go with New Scientist’s range of podcasts which bring you all the week’s biggest stories. Our podcasts are a quick way to stay up to date with all things scientific when you don’t have time to stop and read. Courses Learn from world-class experts about the hottest topics in science with New Scientist Academy. Why subscribe? Subscribers not only gain access to the full archive of digital content available on the website and within the New Scientist app, they can also access subscriber-only events and weekly interactive crosswords. Just click here to subscribe.

Message

blossoming bellies

Brittany's path led her through many experiences before focusing her work on the need for respect and humility in the amazing power, instinct, and normalcy of birth. Completing high school after her junior year with distinguished honors and a focus in visual art and writing , Brittany went on to study Literature at Temple University, graduating cum laude with a Bachelor of Arts degree in English and certificates in both writing and honors. She maintains membership with Phi Beta Kappa, a national academic honor society. Throughout college, Brittany worked for Trio Upward Bound, a national organization that prepares inner city high school students for college. In her role as tutor and counselor, she gained experience in dealing with several different ages from ninth through twelfth grade, understanding of differences in learning pace and ability, and comfort in leading group discussions and projects. Brittany went on to substitute teach for pre-school through eighth grade at Frankford Friends School, strengthening her abilities in areas including the facilitation of group activities, the development of all aspects of the person - physical, academic, spiritual, emotional, and social, and the mentoring of children of all different ages and backgrounds. In addition to her education career, Brittany has completed a mentorship training program which focuses on peaceful solutions to conflict through listening, reflection, and understanding and the development of counseling skills. She attended a Birth Works three day workshop where she gained skills and techniques helpful in facilitating childbirth classes and providing labor assistance. She has also completed birth doula training by both DONA International and Birth Arts International. Brittany is a Birth WorksTM certified childbirth educator, a DONA certified birth doula, a certified breastfeeding counselor with Nursing Mothers Alliance, and a Certified Lactation Counselor through the Academy of Lactation Policy and Practice. She has also completed birth doula training with Birth Arts International. She also holds a Rebozo certification from Wise Birth Choices, L.L.C. Brittany continuously furthers her knowledge through regular attendance and facilitation at conferences, workshops, and lectures, in addition to her home studies, and her facilitation of workshops for clinical and non-clinical birth professionals. In an effort to make maternity care options available to all birthing people, Brittany volunteered her time in putting together the Philadelphia Guide to a Healthy Birth with Choices in Childbirth. Although the Philadelphia Guide is no longer in print, The National Guide is available online at www.choicesinchildbirth.org. Brittany has also been a frequent contributor to the Birth Works quarterly newsletter and wrote monthly for the e-newsletter, "Empowerment for Healthy Living," when it was published. She continues writing for the Birth Works blog. Brittany has been a guest speaker on several pregnancy, postpartum, and health-related topics at businesses around the Philadelphia area, including Martindale's Natural Market in Delaware County, Shanti Yoga Shala and Nest, both in Center City Philadelphia, and the Expectant Parents Boot Camp at The Please Touch Museum. In the spring of 2011, Brittany organized and facilitated a free community screening of the documentary, "Food, Inc." She worked with the non-profit organization WomenCare organizing an event featuring world-renowned midwife Ina May Gaskin in May 2011. Blossoming Bellies has also been featured in the July 2011 issue of herbalist Susan Weed's ezine "Wise Woman Herbal Healing with Susun Weed." In May of 2014, Brittany had the honor of being the only childbirth educator and doula serving as a panelist at the Birth Works "Ask The Experts" event held in Cherry Hill, NJ where she discussed birth options and answered community members' birth-related questions aside several distinguished birth professionals, including obstetricians, academics, pediatricians, and midwives, from the greater Philadelphia area. She was also honored to be a presenter at ICAN's (International Cesarean Awareness Network) meeting on birth education options in the Philadelphia area in January of 2015. Brittany is also the creator of two dynamic workshops focused on understanding the pelvis, the baby's movements and positioning as they descend and rotate, and preventing and working through complications that arise from malpositioning, "Creating Space: Pelvic Dynamics, Fetal Positioning, and Use of the Rebozo" for birth professionals and "Moving Through Labor" for expectant parents. She has had the honor of facilitating her workshop, "Creating Space," for obstetrical, midwifery, and nursing groups around the country. She is a guest speaker at the University of Pennsylvania for their student midwifery program and a frequent speaker at international conferences including the Birth Works International Conference in October of 2016, the ICPA Freedom for Family Wellness Summit in March of 2018, the Evidence Based Birth Conference in September of 2019, the Midwifery Forward 2020 conference, the ICEA 2020 Virtual Conference, and the Utah Doula Association Virtual Mini-Conference in 2020. She also facilitates pelvic dynamics and fetal positioning workshops for Maternity Care Coalition and PALS. She continues to facilitate workshops for conferences and private practices around the country. Blossoming Bellies began with Brittany teaching classes in her home in South Philadelphia. She still occasionally teaches classes in the coziness of her home but, after spending time teaching classes at South Philadelphia Community Acupuncture, The Nesting House on vibrant East Passyunk Avenue, and the community space Lilypad, she now teaches at the BOK building aside Justin Ohm of Ohm Chiropractic. She has also branched out to serving other areas of the city, including Mt. Airy, Fairmount, West Philly, Fishtown, and Center City. Brittany was a Birth Works facilitator at the Maternal Wellness Center in Mt. Airy and continued teaching Birth Works classes in Mt. Airy at The Nesting House (former location of the Maternal Wellness Center) and at each of their additional locations in South Philly, West Philly, and Collingswood, for several years. Her South Philadelphia series classes are now held at the BOK building in South Philadelphia, where she shares space with Dr. Justin Ohm, of Ohm Chiropractic . She brought group Birth Works classes to the Fairmount section of Philadelphia, facilitating workshops at Still Waters Holistic Health Therapies from 2010 through 2019 and to the Fishtown section of the city, teaching at City Sprouts until their close in November 2016 and at Minnow Lane on Frankford Ave through 2020. Brittany's Homebirth Preparation Class can be found at Ohm Chiropractic in South Philadelphia. Her prenatal Breastfeeding and Chestfeeding 101 classes and Infant Care classes are offered in Brewerytown at Kith + Kin and in South Philly at BOK. Check out an interview with Brittany about her philosophies and classes at Philly Baby Bump. Brittany also helps mentor and guide new doulas as they begin their journey into the birth world. Doulas often observe her classes to fulfill their certification requirements and Brittany facilitates workshops specifically for doulas and birth professionals looking to expand their knowledge and skills. In addition, she offers a full doula mentorship course for those looking for one-on-one guidance, resources, and referrals as they enter in to the greater birth community. For more information about doula mentoring and one-on-one options available, please contact Brittany. Blossoming Bellies has been recognized by CBS Philly as one of the Top Childbirth Classes in Philly and is the winner of the 2016 Love Awards for Best Lactation Consultant, the 2017 Love Awards for Best Prenatal Classes, and the 2018, 2019, and 2020 Love Awards for Best Childbirth Preparation Classes. She is also a contributor to the blog A Child Grows and the blog We Bloom in Philly and has written several feature articles for the Birth Works newsletter. Brittany is a contributor to the international best-selling book "Baby Got VBAC: An Inspiring Collection of Wisdom for Better Births After a Cesarean," writing a chapter covering the importance of movement and guidelines for using it in all births, with a focus on vaginal birth after cesarean. In addition, she is a sought-after presenter on pelvic dynamics, fetal positioning, preventing malpositioning in labor, and working through positioning issues that can lead to stalls in labor, facilitating workshops at the Birth Works International Conference, the Freedom for Family Wellness Summit hosted by the International Chiropractic Pediatric Association, the Evidence Based Birth Conference, and the Midwifery Forward 2020 conference as well as for midwifery and obstetrical practices, labor and delivery nurses, and midwifery students around the country. She also has collaborated with East Eagle Yoga to develop and facilitate a prenatal yoga teacher training program full of the bodily knowledge, movement awareness, and empathetic practice that is crucial to the role of a prenatal yoga instructor. Brittany also developed and facilitated the online ICEA training for birth professionals on anatomy and reproductive structure. You can check out interviews with Brittany on a few national podcasts. She was honored to be a featured guest on episode #161 of the well known podcast, The VBAC Link, where she talks all about pelvic dynamics and autonomy in birth. Check it out at The VBAC Link! She will also be featured on the Vagina Talks podcast in February 2021. Providing expecting families with information, resources, a listening ear, and love and support is at the core of Brittany's goals. In helping parents to recognize their strength as humans, role models, and advocates for the needs and wishes of themselves and their children, Brittany assists families in creating birth and parenting experiences of which they feel positive, confident, and informed. Her approach to birth and parenting focuses on building awareness of one's intuition and combining it with learned knowledge in a way that is respectful of the needs and abilities of each individual.

Message

moderntronics

Harrow,

In these terms and conditions (“Conditions”) the following expressions shall have the following meanings: “Business Day” means any day other than Saturday, Sunday or a public holiday. “Business Hours” means the hours detailed in Condition 32 below. “Contact Hours” means Monday to Friday (inclusive) from 07:00 hours to 17:00 hours but excluding bank holidays. “Contract” means any contract between MT and the Customer for the supply of Hardware and/or Software (with the associated Licence) and/or services which is subject to these Conditions. “Customer” means any person, firm or company who enters into a Contract with MT to which these Conditions apply. “Force Majeure” means any event outside the reasonable control of either Party affecting its ability to perform any of its obligations (other than as to payment) under these Conditions. “Goods” means all or any tangible or intangible goods or intellectual property including but not limited to Hardware and Software which are provided to a Customer in accordance with these Conditions. “Hardware” means any hardware provided by MT to the Customer. “MT” means MODERNTRONICS Ltd. or its servants and agents as the case may be. “Insolvency Event” means any one of the following in relation to the Customer: (i) a notice being issued to propose a resolution for winding up or dissolution, or such a resolution being passed; (ii) a petition for a winding up or an administration or bankruptcy order being presented, or such an order made; (iii)any steps being taken with a view to a voluntary arrangement or other assignment, composition or arrangement with all or any creditors or any moratorium, readjustment, rescheduling, forgiveness or deferral of all or any indebtedness; (iv) suspension of payments to all or any creditors and/or ceasing business; (v)an encumbrancer taking possession of all or any assets; (vi) an administrator or receiver being appointed over the Customer or all or any of its assets; (vii)any action anywhere similar or analogous to any of the foregoing; or MT reasonably believing that any of the foregoing is imminent. “Licence” has the meaning attributed to it in Condition 23 below. “Minimum Term” means the term set out in Condition 17 below. “Party” means MT or the Customer and “Parties” means both of them. “Response Time” means two Working Hours from an initial call to the hotline under Condition 26 or 28 below. “Seminar” means any seminar provided by MT. “Service Operator” has the meaning given to that term in Condition 28 below. “Site” means https://www.moderntronics.com and all subdomains including (but without limitation) “Software” means software or software updates or upgrades provided by MT and licensed to the Customer under Condition 23 below. “Training Sessions” means any training session provided by MT. “Working Hours” means the hours between 9:00 to 17:00 on any Business Day 2. Interpretation In these Conditions, the following rules apply: A person includes a natural person, corporate or unincorporated body (whether or not having separate legal personality). A reference to a Party includes its personal representatives, successors or permitted assigns. A reference to a statute or statutory provision is a reference to such statute or provision as amended or re-enacted. A reference to a statute or statutory provision includes any subordinate legislation made under that statute or statutory provision, as amended or re-enacted. Any phrase introduced by the terms including, include, in particular or any similar expression shall be construed as illustrative and shall not limit the sense of the words preceding those terms. A reference to writing or written includes faxes and e-mails. 3. General Information These Conditions apply when MT: sells and delivers Hardware; sells and delivers Licences; sells and delivers Software; or provides repairs or any other services to the Customer. They will also apply to other business transactions unless MT agrees that alternative special conditions apply. These Conditions apply to the exclusion of any other conditions that may be proposed by a Customer or implied by law (insofar as such exclusion is lawful). Part II Specific Provisions for the Use of the Online Shop Customers purchasing Goods from the Site, must read all Parts of these Conditions, which apply to them in full. 4. Consumers The Goods and services provided by MT are designed only for sale to and use by businesses in the course of their business activities. MT does not knowingly sell to any person dealing as a consumer or supply anything for personal use. 5. Customer’s Status By placing an order on the Site, the Customer warrants that he or she is: legally capable of entering into binding contracts and, where the Customer is an individual, that he or she is at least 18 years old; and is dealing in a business capacity and purchasing Goods and/or services for the purpose of his business and not for personal use. Part III General Conditions for the Provision of Goods and Services 6. Formation of Contract Quotations provided by MT to the Customer are not binding on MT. The Customer’s order constitutes an offer to MT to buy the Goods or services. All orders are subject to acceptance by MT. The offer will be deemed accepted, and a Contract formed, when MT sends the Customer confirmation that the Goods have been dispatched (“Dispatch Confirmation”) or, in the absence of a Dispatch Confirmation, when the Goods are delivered. The Contract will only relate to those Goods whose dispatch is confirmed to the Customer by a Dispatch Confirmation or if no Dispatch Confirmation is sent, those Goods which are actually dispatched. MT is not obliged to supply any Goods which may have been part of the Customer’s order until the dispatch of such Goods has been confirmed in a separate Dispatch Confirmation. Subject to Condition 17 below, an order for services will be deemed to have been accepted, and a Contract formed, when MT sends the Customer confirmation that the services ordered will be provided (“Service Confirmation”) or, in the absence of a Service Confirmation, when the services begin to be provided. Oral representations will only be binding upon MT if they are expressly confirmed in writing by MT to the Customer. 7. Price Unless MT expressly specifies prices to the Customer, MT’s current list of prices applicable at the time of the acknowledgement of order will apply. Unless otherwise agreed in writing, all prices are exclusive of value added tax, postage, freight, insurance, forwarding fees, installation and commissioning, travelling expenses and subsistence, which will be added as appropriate. MT will charge overtime for work outside of their normal Business Hours at up to 150% of the hourly rate from time to time applicable during Business Hours. Subject to Condition 16 below, prices are liable to change at any time, but changes will not affect orders in respect of which MT has already sent the Customer a Dispatch Confirmation or a Service Confirmation as the case may be. The Site contains a large number of products and it is always possible that, despite MT’s efforts, some of the products listed may be incorrectly priced. MT will normally verify prices as part of dispatch procedures so that, where a product’s correct price is less than our stated price, MT will charge the lower amount when dispatching the product to you. If a product’s correct price is higher than the price stated on our site, MT will normally, at our discretion, either contact you for instructions before dispatching the product, or reject your order and notify you of such rejection. MT is under no obligation to provide any Goods or services to the Customer at an incorrect (lower) price, even after MT has sent a Dispatch Confirmation or a Service Confirmation in relation to those Goods or services if such incorrect price could reasonably have been expected to be recognised by the Customer as an error. 8. Delivery and Availability The Customer’s order for Goods will be fulfilled by the delivery date in the Dispatch Confirmation or, if no delivery date is specified, then within 30 days of the date the Customer made his order (where such an order leads to a Contract). The period for delivery or performance of the Contract will normally commence on MT’s acknowledgement of the order. However, if the Customer is required to do anything before MT can effect delivery, MT will, as soon as practicable, notify the Customer accordingly. The time within which MT must deliver any Goods will run from the date on which MT receives notice from the Customer that it has duly complied with such notification from MT. Unless otherwise agreed in writing, any periods mentioned in the acknowledgement of order for services and Software development are based on a preliminary estimate of the required workload and therefore are approximate only. Time of delivery and performance is not of the essence. If MT fails to meet any delivery or performance dates set out in the acknowledgement of order and is solely responsible for such failure, the Customer may terminate the Contract but only after MT has been given an opportunity to rectify the situation and subsequently fails to meet the revised set of delivery or performance dates provided by MT to the Customer in writing. Unless MT has been deliberately or grossly negligent, all further claims of the Customer on the basis of the delay in performance are excluded. If MT cannot deliver or perform its obligations under the Contract due to Force Majeure or a failure of the Customer to cooperate or any other act, default or omission of the Customer, then MT will be entitled to perform its obligations under the Contract once the issue has been resolved, provided the issue occurred while MT was still allowed to deliver or perform and MT shall have no liability whatsoever for any delay or its failure to perform its obligations. 9. Agreed Performance Unless specified otherwise in writing, the agreed performance in respect of any repairs provided by MT, at the Customer’s request will be to adjust the relevant unit(s) to MT’s applicable standard specifications for that unit. Where the relevant unit(s) cannot be repaired to MT’s applicable standard specification due to the Customer limiting the repairs required or the time and money to be invested MT may exceed the Customer’s request if MT considers, at its sole discretion, that such additional repairs are reasonable and will ensure the proper functionality of the unit in question. The agreed performance levels for MT’s maintenance and care services are as set out in Conditions 26 and 28 below; for all other services the agreed performance levels will be as set out in the acknowledgement of order. 10. Refunds Where the Customer returns Goods (at the Customer’s cost) because he or she claims that the Goods are defective, MT will examine the returned Goods and will notify the Customer of its findings within a reasonable period of time. If MT (in its sole discretion) deems that the Goods are defective, MT may at its option repair, replace or provide a refund in respect of such defective Goods. MT will process any repair, replacement or refund as soon as practicable and, in the case of any refund, within 30 days of the day MT confirmed to the Customer that the Customer was entitled to the same. Such refunds will be made in full, including a refund of any delivery charges for sending the item to the Customer. 11. Import Duty If the Customer orders Goods for delivery outside the UK, they may be subject to import duties and taxes which are levied when the delivery reaches the specified destination. The Customer will be responsible for payment of any such import duties and taxes. Please note that MT has no control over these charges and cannot predict their amount. Customers should contact their local customs office for further information before placing an order. Customers must comply with all applicable laws and regulations of the country for which the Goods are destined. The Customer will indemnify and keep indemnified MT in respect of all costs, proceedings, losses and liabilities resulting from any breach by the Customer of any such laws. 12. Retention of Title to Property The Goods will be at the Customer’s risk from the time of delivery. Property in and title to all Goods will remain with MT until MT has received payment for the full price of all the Goods (and/or all other goods and/or services supplied by MT to the Customer under any other contract whatsoever).. The Customer may sell or use Goods in which title is retained during the course of their normal business, but may not give such Goods by way of pledge or pledge these Goods as security. Until the property in and title to the Goods passes to the Customer: the Customer shall keep the Goods properly stored, protected and insured and separate from all or any other goods whether belonging to MT, the Customer or any third party; MT shall be entitled at any time forthwith to revoke the Customer’s power to deal with the Goods; and such power shall automatically cease if an Insolvency Event shall occur in respect of the Customer; and the Customer shall not make any modification to the Goods, the Software or their packaging or alter, remove or tamper with any marks, numbers or other means of identification used on or in relation to the Goods. Upon termination of the Customer’s power to deal with the Goods, the Customer shall place the Goods at the disposal of MT and MT are hereby irrevocably authorised without the need for consent of any third party but using only such force as may be necessary, to enter upon any premises of the Customer or any third party for the purpose of removing the Goods. If third parties claim title to Goods with retained title, the Customer will inform MT without delay, will notify the person making the claim of MT’s title and will support MT in enforcing its rights, including taking all the necessary steps required to preserve MT’s rights, including commencing litigation at the Customer’s own expense. If the Customer breaches the Contract, e. g. by delaying payment, the Customer will be obliged to return the Goods with retained title if requested by MT, in return for which MT will not terminate the Contract. 13. Payment Where services, maintenance or care are provided on an ongoing basis, MT will invoice the Customer for these at the beginning of the billing period or as soon as reasonably practicable thereafter. The Customer will pay MT’s invoices in full within 30 days from the date of the relevant invoice. Depending on the scope of an order, payments for such services, maintenance or care are due either upon placement of the order by the Customer or upon partial delivery of the same of between 40 to 50% of their respective order value. BACS or cheque are the only methods of payment accepted. Invoices for Seminars and Training Sessions will be issued at the beginning of the respective session and payment is due immediately and without deduction. 14. Delay of Payment Where a Customer fails to pay an invoice by the due date, MT will be entitled to charge the Customer interest on all monies outstanding from the due date until the actual date of payment (both before and after judgment) at a rate of 8% above the base rate of the Bank of England calculated on a daily basis. 15. Setting-Off and Refusal of Payment The Customer cannot exercise any right of set-off in respect of amounts owed to or by MT. 16. Change of Pricing by MT for Ongoing Maintenance or Care MT may increase its prices for maintenance and services by giving the Customer written notice 2 months prior to the end of the Minimum Term. The Customer has 4 weeks from the date of receipt of the written notice from MT to object to the change. Where the Customer so objects, the Customer will be entitled to give notice to MT to terminate the Contract as of the date of the proposed price increase. 17. Automatic Extension of Contract Where services, maintenance or care are performed on an ongoing basis the Contract will come into effect upon acceptance by MT of the first order from the Customer for Software maintenance. The Contract will initially run until the date specified at “Minimum Service Duration” as set out in the “MT Service Product List” or until the expiry date where an expiry date is stipulated in the Contract (“Minimum Term”). Subject to one of the Parties serving written notice of termination on the other at least three months prior to the expiry of the Minimum Term, the Contract will be extended automatically. In the case of Software Licences supplied without a time limit, the Contract will extend until December 31st of the current year. The subsequent extension periods will begin on January 1st and end on December 31st of the respective year. In the case of Software Licences supplied with limited validity (e.g. a licence for 1-year) the extension is based on the terms and conditions set out in the description of the respective licence (e.g. extension by one further year). Unless otherwise agreed in writing, any extension to a Contract will be on the basis of MT’s current price list as at the date of such extension. 18. Delivery Obligations and Shipping The conditions for EXW (ex works) (MT’s premises or such other place referred to in the relevant order) as set out in the Incoterms 2010 apply to delivery of any Goods. Claims for any transport damages and any replacement of damaged Goods, remain with the Customer who is responsible for adhering to the mode and period for the filing of any claims with carriers, shippers and insurers. 19. Scope of Warranty (Material Deficiencies and Deficiencies in Title) MT warrants that the Hardware is free from defects in workmanship and material as at the time of transfer of risk; and warrants that the Software does not contain any flaws which void or substantially reduce its value or suitability for the usual or contracted purpose. Where MT is not the author of the Software, MT does not warrant that such Software will run without interruptions or errors, nor that MT will be capable of resolving all Software errors, nor that the Customer will be capable of achieving all of the functions included in the Software in all of the combinations chosen by the Customer, nor that these will meet the Customer’s requirements. MT will only warrant the quality and/or durability of Goods if it has expressly agreed in writing with the Customer that it will do so. The warranty period is 1 year. Where MT is the author of the Software such Software is subject to MT’s standard warranty. 20. Obligation to Inspect and Serve Notice of Defects The Customer must inspect the Goods upon delivery or repair and must notify MT in writing of any failure by MT to meet the specification within 7 days of delivery or repair or (where the failure was not apparent on reasonable inspection) within a reasonable time being no more than 1 month after discovery of the failure. Where the Customer fails to provide such notice MT will have no liability under its warranty. 21. Liability Subject only to Condition 21 d), MT shall not be liable to the Customer in contract, tort (including without limitation negligence) and/or breach of statutory duty for any loss or damage which the Customer may suffer by reason of any act, omission, neglect or default (including negligence) in the performance of the Contract by MT, its servants or agents, in a sum which is greater than GBP 200,000 per incident or series of connected incidents. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect loss of any kind resulting from these Conditions, its performance or any breach of its terms. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect economic loss of any kind including (but without limitation) loss of business opportunity, reputation, goodwill resulting from these Conditions, its performance or any breach of its conditions. Notwithstanding any other provision herein, nothing in these Conditions shall operate so as to limit or exclude MT’s non-excludable liability in respect of death or personal injury caused by the negligence of MT to exclude the application of Section 12 of the Sale of Goods Act 1979 and to exclude liability for fraudulent misrepresentation. MT’s liability for loss of data is limited to the effort required to restore the data from proper backups provided by the Customer. 22. Third Party Rights If any third party claims or takes action against the Customer, because Goods delivered by MT, or their use in accordance with the instructions provided by MT, purportedly violate their commercial rights or proprietary rights, then the Customer will inform MT of the same. MT agrees that they will assist the Customer in defending such claims. Where the claim is made to the Customer within 12 months of the date of delivery, MT will indemnify the Customer against claims provided that the Customer: appoints MT to defend the claims or to settle the dispute, and promptly notifies MT of any such claim, keeps the Customer informed of all information received and provides such reasonable assistance to MT as it shall reasonably require, does not defend the action itself without coordinating such defence with MT, and does not at any time admit liability or otherwise settle or compromise or attempt to settle or compromise the said claim or action except upon the express instruction of MT, the alleged breach of rights is not based on alteration of the delivered item used by the Customer, and does not use the item delivered by MT in conjunction with other items and/or in a fashion that breaches any such rights, in a situation where the use of the item as delivered by MT would not have breached the rights of the person who has filed the claim. MT may at any time and at its own expense acquire on behalf of the Customer the right to continue to use the Goods, to replace the Goods or alter them in such a fashion that the rights of others are no longer breached. If this is not possible, the Customer shall return or destroy the Goods if required to do so by MT who will reimburse the purchasing price for the Goods less depreciation. If the Customer refuses to do so, MT will no longer defend the claim or provide the Customer with any further support. The Customer has no further rights in case of disputes over proprietary rights with third parties and MT shall have no liability therefore unless MT could be blamed for acting deliberately or with gross negligence. Part IV Special Conditions for Delivery of Software 23. Conditions of Use for Delivered Software In the case of delivery of Software to the Customer, MT hereby grants the Customer a simple, non exclusive and non-transferable, licence to use the Software (“Licence”) . The validity of the Licence is not time limited, unless otherwise specified to the contrary in the terms and conditions of the Licence. MT, grants the Customer the use of such Software in the form of the object code and the user documentation with the use being restricted to one electronic data processing system at any one time and only for the tasks for which it is intended. Unless permitted by law, the Customer will not decompile the Software or perform reverse engineering. The Customer may duplicate the Software but only to the extent that this is required for the permitted use, and in order to allow it to perform data backup. Upon delivery of any Software, including updates and upgrades, the Customer will immediately produce a backup copy. MT may terminate the Licence granted to the Customer pursuant to this Condition 23 with immediate effect if the Customer is in breach of the conditions for the use of the Software for a period of 30 days from the date of a written notice of such a breach from MT or any third party. On termination of this Contract howsoever arising, the Customer will return to MT within 30 days all Software together with any related materials owned and licensed by MT and shall delete all copies and partial copies of the Software however stored within 7 days of service of the notice. Proof of such deletion must be provided to MT without delay. On receipt of prior written consent from MT, the Customer may retain a copy of the Software for the purposes of archiving. 24. Delivery of Software MT will only install the Software if this has been expressly agreed in writing between the Customer and MT. MT is able to provide telephone consultancy and support concerning questions relating to the application of the respective Software products as well as the solution of problems that may occur as provided for in Condition 26 below. 25. Prerequisites for Running the Delivered Software The proper running of Software systems supplied will only be guaranteed if the Hardware and operating system components used correspond to the reference systems of the respective manufacturer(s), as well as having been approved and certified. Unless otherwise agreed in the Contract, the Customer shall ensure that the provisions in this Condition 25 are complied with. Part VMaintenance and Care Application Software 26. Scope of Performance of MT Services for Application Software For the Software products, unless otherwise expressly agreed in writing, MT will provide the following services, denoted by Service Level “SW-Service STANDARD” and Service Level “SW-Service E-STANDARD”: Right to use Software and documentation updates: MT grants the Customer a non-transferable, non-exclusive Licence to use the Software and any documentation or updates. The right of use is not limited in validity, unless otherwise specified in the terms and conditions of the Licence. Software and documentation updates: MT will supply the Customer with the current version of the Software as specified in the Contract. This will be done as specified by the manufacturer of the Software. The documentation will be supplied in the form determined by the manufacturer of the Software. The installation of Software updates will be performed by suitably qualified personnel of the Customer. Alternatively for an additional charge, MT may install the Software updates on behalf of the Customer. Where the Customer has adapted the Software, the Customer will be liable for the additional cost of performing the same adaptation to the new version of the Software or alternatively the Customer may perform the necessary adaptation himself. Hotline (Service Level “SW-Service STANDARD” only) MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. E-mail Hotline (Service Level “SW-Service E-STANDARD” only) MT is able to provide e-mail consultancy and support in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours Wherever possible, qualified consultancy will be provided by MT within the Response Time. MT Hotline: E-mail: hotline@MT.com Internet: http://www.MT.com/customersupport Software error messages Where Software problems occur which MT is unable, for whatever reason, to resolve, the Customer may send a written error message to MT. The purpose of such an error message is to identify the error in the Software and enable the manufacturer to resolve the error. MT shall liaise with the manufacturer(s) of the Software products to resolve any Software errors as promptly as possible. Restoration of any data, regardless of the cause of the data loss, is not the responsibility of MT. 27. Obligation of the Customer to Co-operate Pre-conditions for the provision of the services by MT to the Customer are that the Customer has legally acquired the Software and holds a corresponding Licence to use it. In addition, the Software must be in the same condition that it was in when it was delivered. The services exclusively relate to the current release and delivered version of the Software. If earlier Software versions are used, a one-time update service which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Services will not be performed for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). If the operating system for the Hardware is not included in the Contract, the Customer must update the operating system to the most recent version (e. g. by purchasing updates) if this is required in order to use the new versions of the application Software. Hardware and Operating Systems 28. Scope of Performance of MT Maintenance and Care Services for Hardware and Operating System For Hardware products and the operating system, unless otherwise agreed in writing, MT will provide the following services, denoted by Service Level “HW-Service SPECIAL”: The scope of performance is briefly set out in the “Special Description” for each product listed in the attached “MT Service Product List”. The exact scope of performance will be determined in accordance with the attached description of performance issued by the respective MT service operator (“Service Operator” including but not limited to Hewlett-Packard, Fujitsu Siemens and Silicon Graphics). The following shall also apply: Hotline MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Hardware products and operating system, as well as the resolution, (in so far as it is reasonably practicable to do so) of any problems which may occur. This service will be performed by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. Where queries arise outside of the Contact Hours, the Customer should address such queries directly to MT’s Service Operator Response time for Hardware failures MT will use reasonable endeavours to solve a query within the Response Time. The Response Time shall be deemed to have been initiated either as soon as the customer service personnel arrives on the relevant site, or as soon as remote diagnosis is started, where either is required to resolve the problem. The appropriate Response Time will be determined in accordance with the attached description of performance issued by the respective MT Service Operator. 29. Services Not Included Unless otherwise agreed in writing, the following services will not be provided by MT to the Customer: a) Repair/re-acquisition of devices that have been damaged as a result of: incidents of war of any type civil wars, nuclear energy, deliberate action of the Customer (not of his subcontractors) b) Repair/re-acquisition that is required because of repair work or alterations of devices carried out by the Customer or any third party without the prior written consent of MT. c) Work required due to interface problems between MT’s devices and those of other manufacturers and suppliers. d) Customer service which is required because a product that is not covered under this Contract has caused an error. e) Customer service that has become necessary because devices have been used under adverse conditions (e.g. including contaminations and deviations from recommended room temperature and relative humidity) or in conjunction with accessories or (device-specific) consumables (e.g. including foreign disks, disk stacks, cassettes, printer paper and print heads of any type) (“Device Specific Consumables”) which do not meet the manufacturer’s specifications. f) Replacement of Device-Specific Consumables. g) Data backup. h) Calibration work that is not related to repair. 30. Restoration of Data/Programs The restoration of data and programs upon repair or replacement of a defective hard disk is limited to starting the copying program (Restore) used to restore the last full data backup. 31. Obligation of the Customer to Cooperate a) Hardware service Pre-conditions for the provision of Hardware services by MT are that the Hardware has been acquired legally and has been installed properly at the Customer’s site. In addition the Hardware affected must correspond to the current revision and be in proper condition when including in the Contract. These pre-conditions shall be met immediately after the expiry of the warranty period specified in the Contract. If the Hardware is included in the Contract at a later date, these pre-conditions must first be confirmed by a takeover inspection of the Hardware by MT, which will be independently invoiced and paid for by the Customer, and if required the pre-conditions will be achieved by MT undertaking the required repair work. b) Operating System Service Pre-conditions for the provision of operating system services are that the Customer has legally acquired the Software and has been granted the necessary corresponding Licence to use it. In addition the Software must be in the same condition as when it was delivered to the Customer. The services exclusively relate to the current release and version of the Software. If earlier Software versions are used, a one-time “Update Service” which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Operating System services will not be provided for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). Part VI Generally Applicable Conditions 32. Prices and Fees for Special Services The following items are not included in the payment for services under Conditions 26 and 28 above and will be invoiced separately in accordance with MT’s current price list: Services performed outside Working Hours on the express request of the Customer. Services to correct errors caused negligently by the Customer or by any unauthorised third party as a result of improper treatment, unsuitable operating media, unauthorised manipulations, Software manipulations, non-adherence to operating conditions or otherwise. ices required due to faulty handling, excessive vibration, chemical influence, excessive dust burden or non-adherence to the properties set forth in the unit specifications. Unreasonable wait times and delays in the performance of services which are caused by the Customer. Services to remedy failures caused by Force Majeure. 33. Backup of Customer Data Prior to the commencement of any service work undertaken by MT, the Customer will backup all data in such a way that it may easily be restored by MT in the event that it is lost in the service process. 34. Change of Installation/Application Site Where maintenance and care services are provided on an ongoing basis by MT, the Customer will immediately inform MT in writing of any change to the installation or application address. If such a change results in an increase in MT’s expenses. MT reserves the right to either increase the prices charged to recover the additional expense incurred or alternatively MT may serve notice on the Customer to terminate the Contract where the new address is outside United Kingdom. 35. Miscellaneous Service Conditions and Obligations of the Customer to Co-operate MT may appoint authorised third parties to provide services. The Customer may only transfer title to services to third parties with the prior written consent of MT. Where defective components or devices are replaced by MT, these will become the property of MT. Extension of the products included in the maintenance agreement may be included in this Contract with the consent of the Customer. On request, MT will offer to the Customer a corresponding extension of the Contract, provided maintenance for the respective product is available. Where MT has to perform any services, the Customer shall accurately and without delay provide MT with any/all information that is required to perform such services. The Customer will provide MT with the name of a competent and appropriately qualified contact person and will provide the name of an appropriate substitute in order for the Hardware and Software to be maintained. Any contact(s) will have participated in the respective Seminars and/or Training Sessions held from time to time by MT or alternatively will have acquired comparable knowledge. These contacts will be available to MT’s technicians on site or will have access to the MT’s hotline as applicable. Consumables and Auxiliaries (which shall include documentation, application programs, data, telephone lines for transmission of voice and data) are not included in the scope of performance and shall be provided by the Customer in the vicinity of the system, such consumables and auxiliaries will be provided during Working Hours or, with prior consultation, outside of these hours. Additionally, the Customer will provide to MT computing time and consumables as required. 36. Specifically Ordered Service Days If service days are ordered for call-off within a specified period, such orders are binding. The services will become due for payment once they have been performed or by the end of the defined time period at the latest. Specifically ordered service days to be called off within a defined time period, can still be called off during a time of three months beyond the expiry of such defined time period. Thereafter they are lost. The claim to payment is thereby unaffected. For users that register on our website (if any), we also store the personal information they provide in their user profile. All users can see, edit, or delete their personal information at any time (except they cannot change their username). Website administrators can also see and edit that information.

Message

1...53 54 55

Delivered OnlineWed, Sep 3, 11:00 AM GMT+1 + more

£72

Show all 8639