665 Educators providing Other courses in Epping

The Temporary Works Coordinator course will provide you with knowledge of the role. You will also gain a good understanding of risk management on a temporary works site. Course Objectives: By the end of the course, the delegate will gain knowledge of: The need for a temporary works co-ordinator The day-to-day roles of others involved in the temporary works procedures Risk assessments and method statements Best procedures as stated in BS 5975:2019 Course Content: The content covered by the CITB course includes: Various groups and types of Temporary Works Case studies, procedures and policies of Temporary Works BS5975:2019 CDM Regulations Legislation and relevant Codes of Practice Register for Temporary Works, design requirements and checks Standard solutions and guidance design documents Temporary works Co-ordinator – job role and responsibilities Assessment: To successfully complete the course, you will need to get 72% or above in the final exam. The trainer encourages the delegates to be interactive and involved throughout the training. Certificate: The certificate for this course is valid for 5 years. Instructions Please note all Temporary Works Coordinator courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

This one-day course is a must for anyone considering or already working within a construction or civil engineering environment. This course provides Health and Safety awareness and is endorsed by Build UK as a standard training for all operatives on site. Aims To give a clear understanding of Regulations & Legislation that applies to construction work and is an ideal refresher for any operative that has previously completed training in Health & Safety. Course Content • Accident prevention • Health & Safety law • Control and management of the site and your how your role fits in with this • Risk assessments and method statements • Performing safely on site • Reporting unsafe acts to prevent an accident • Individual & employee responsibilities • What to do if you think anyone’s Health and Safety is being put at risk Assessment At the end of this course, all delegates will have a clear understanding of the requirements of Health and Safety Legislation and their responsibilities to comply with them. Candidates will need to complete a multiple-choice exam at the end of the CITB course. They will also need to engage and interact with others throughout the day. Certificate This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all operatives. The certificate is part of CSCS Green Card requirements. To remain certified in this area, you will need to retake the course before the expiry date or have completed an NVQ2 or higher in your skills set. Instructions Please note all Health & Safety Awareness courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

BAG AND ACCESSORY DESIGN COURSE: WHAT IS THIS COURSE ABOUT?This fashion design course for beginners and intermediates is a group class aimed to support aspiring designers or designers in need of guidance in designing viable and realistic bags and/or accessories.This course enables you to understand essential skills required to become a fashion bag designer ans well as guiding you through the steps necessary for designing, developing, prototyping and manufacturing your collection. WHY THIS IS NOT THE USUAL ‘ACCESSORY DESIGN’ COURSEThis course is designed by a team of designers, prototype makers and handbag manufacturers.It is both a theoretical and practical introductory course which will teach you what the industry requires from designers in order to be able to understand and correctly translate their ideas into finished products.This course is focused on giving you an overview on the complexity and extensiveness of the process that designing handbags requires.The course will assist you in understanding the prerequisites before and during the design of your styles. This knowledge will enable you to circumvent a lengthy, costly, and occasionally frustrating process when it comes time to prototype and manufacture your collection. WHY WE CREATED A FASHION DESIGN COURSEAfter years of experience in designing and developing collections for our customers, we realised that there was a substantial lack of clear information available about what designing a collection of handbags and fashion accessories truly requires and how it is achieved.We created this course with the aim of helping the new generation of designers, as well as designers which are still struggling, in developing their ideas and empower them to clearly and correctly communicate them to whoever is going to prototype their collection.We essentially have created this tuition based on the needs and problems of our customers, hoping to promote and facilitate creatives in the realisation of their projects. WHO IS THIS COURSE FOR?This course is designed for aspiring designers and professionals seeking expert advice from the industry. It caters to those in need of guidance to optimise their design process or understand the nuances of working as a fashion accessory designer.No previous experience is required. WHAT WILL BE TAUGHT?The designing classes cover various topics, including:Preliminary considerations before designing on the role and skills of a designerUnderstanding the concept and use of a moodboardAnatomy of a handbag, including lining and hardwearImportance of construction and finishing optionsDifferences and purposes of illustrations vs technical drawingsSketching techniques, including drawing in perspective and technical drawingsProduct development for a specific designUnderstanding what technical information the prototype maker requiresOverview of the prototyping process HOW WILL THE ABOVE BE TAUGHT:The class will take place in person at our London studio and the lesson will alternate between theoretical lessons and practical exercises. INCLUDED IN THE COURSE:You will also receive access to a collection of handouts providing relevant information, useful resources and support in continuing your designing process independently.The handouts will contain:– A glossary containing essential key words related to the topic of the lesson– An illustrated glossary containing information about type of bags and bags’ features– Documents about leather types, finishings, tanning processes– Information about perspective and guides to be used as reference to develop your drawings– A list of recommended suppliers for both leather and fittings (physically in London and online)– A glossary containing information about leather types and characteristicsWHAT ARE THE ENTRY REQUIREMENTS?You should be able to use measurements and understand verbal and written English instructions. ARE THERE ANY OTHER COSTS? IS THERE ANYTHING I NEED TO BRING?Materials to exercise with are included.Feel free to bring a notepad, if you would like to take some notes, we will provide the rest.HOW LONG IS THIS TUITION?:This tuition will require up to 7.5 hours to complete but depending on the number of attendees, the ability of participants and the group’s pace, the syllabus may be covered in a shorter time frame.We aim to provide customised and high-quality tuition services and by only allowing max 6 students at a time, we are able to focus on each person needs and interests.As every student has a different level of ability and previous experience, this course might lead some students to complete the core aspects of the lesson in a shorter time frame than others.Students who complete the course early will be welcome to stay and use the studio facilities to exercise on the topics of the lesson.

This two-day course is a must for anyone who is considering or already working in a role with supervisory responsibilities. This course provides an understanding of health, safety, welfare, and environmental issues. It highlights legal responsibilities and the need to promote health and safety to supervise effectively. It is endorsed by Build UK as the standard training for all supervisors working on Build UK sites. Aims To give a clear understanding of health, safety, welfare, and environmental legislation that affects your supervisory role. To help you fulfil your responsibilities regarding health, safety, welfare, and the environment. To help you implement new guidance and industry best practice affected by changes. Course Content • Health and safety law and how it will apply to supervisors. • Your supervisory responsibilities in controlling site safety. • Risk assessments and the need for method statements. • Effective site inductions, toolbox talks and method statement briefings. • Monitoring site activities effectively. • Timely intervention when bad practice is identified. Prerequisites This course is for you if you are considering, or already have, supervisory responsibilities. Assessment At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a supervisor’s role. Certificate This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all supervisors. To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken. Instructions Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox

This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries. It is endorsed by Build UK as the standard training for all construction managers. Aims To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce. Course Content To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce. Course Content • Health, safety, welfare and environmental legislation affecting your daily work • New guidance and industry best practice • Duties and responsibilities with regards to health, safety, welfare, and the environment • Safe working Prerequisites This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager. Assessment At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role. Certificate The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers. To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken. Instructions Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

Learn the popular Night Club Style Salsa aka Salsa On2/Mambo with Funky Mambo! Every Tuesday. No partner, no pre-experience required. 😊

LEARN HOW TO MAKE SIMPLE LEATHER ITEMS: WHAT IS THIS COURSE ABOUT? This is a theoretical and practical taster group tuition during which you will receive an overview on basic leather craft skills and techniques and realise one or more simple leather items to take home with you.The class will take place in our London workshop where you will be able to see how a leather craft studio is equipped and receive practical demonstrations of common working methods used in the field.YOU WILL BE ABLE TO MAKE AS MANY CUSTOMISED LEATHER ITEMS AS YOU CAN, choosing between a selection of different types of goods such as key rings, glasses cases, card holders, bracelets and more.You will be shown different types of leather and get to understand their main features. You will receive an introduction on how to prepare, mark, cut, edge finish leather and use simple fastening hardware.You will receive relevant, useful and informative handouts as well as lists of leather and tool suppliers.   At the end of the tuition you will have:– Gained an understanding of leather types– Been instructed on the use of common fastenings and closure techniques– Received an overview on the correct use of tools for preparing, marking, cutting and punching leather– Understood and practiced leather craft techniques such as beveling and burnishing techniques– Realised you own small, simple leather item(s) to take home with you WHAT ARE THE ENTRY REQUIREMENTS?This course is suitable for total beginners and beginners with some experience in leather crafts.You should be able to use measurements and understand verbal and written English instructions.   ARE THERE ANY OTHER COSTS? IS THERE ANYTHING I NEED TO BRING?Materials are included.Feel free to bring a notepad, if you would like to take some notes, we will provide the rest. INCLUDED IN THE COURSE:You will be provided with useful handouts which contain:– A list of recommended suppliers for both leather and fittings (physically in London and online)– A glossary containing information about leather types and characteristicsHOW LONG IS THIS TUITION?:This tuition will require up to 2 hours to complete.We aim to provide customised and high quality tuition services and by only allowing up to 6 students at a time, we are able to focus on each person needs and interests.As every student has a different level of ability and previous experience, this course might lead some students to complete the core aspects of the lesson in a shorter time frame than others.Students who complete the course early will be welcome to stay and use the studio facilities to exercise on the topics of the lesson.

P404 Air Sampling of Asbestos and MMMF and Requirements for a Certificate of Reoccupation Following Clearance of Asbestos is the industry standard qualification for those whose work involves air sampling and clearance testing, such as asbestos analysts. In addition to holding the qualification, they are required to undertake and provide evidence of annual refresher training. RP404 Refresher is a new course, specifically designed to meet this requirement. RP404 Refresher enables candidates to revise and update their knowledge on air sampling and clearance testing techniques, and to receive a certificate of course completion by passing a written examination, which covers both the theory and practice of air sampling and clearance testing.

LEARN HOW TO MAKE SIMPLE LEATHER ITEMS: WHAT IS THIS COURSE ABOUT? This is a theoretical and practical taster group tuition during which you will receive an overview on basic leather craft skills and techniques and realise one or more simple leather items to take home with you.The class will take place in our London workshop where you will be able to see how a leather craft studio is equipped and receive practical demonstrations of common working methods used in the field.YOU WILL BE ABLE TO MAKE AS MANY CUSTOMISED LEATHER ITEMS AS YOU CAN, choosing between a selection of different types of goods such as key rings, glasses cases, card holders, bracelets and more.You will be shown different types of leather and get to understand their main features. You will receive an introduction on how to prepare, mark, cut, edge finish leather and use simple fastening hardware.You will receive relevant, useful and informative handouts as well as lists of leather and tool suppliers.   At the end of the tuition you will have:– Gained an understanding of leather types– Been instructed on the use of common fastenings and closure techniques– Received an overview on the correct use of tools for preparing, marking, cutting and punching leather– Understood and practiced leather craft techniques such as beveling and burnishing techniques– Realised you own small, simple leather item(s) to take home with you WHAT ARE THE ENTRY REQUIREMENTS?This course is suitable for total beginners and beginners with some experience in leather crafts.You should be able to use measurements and understand verbal and written English instructions.   ARE THERE ANY OTHER COSTS? IS THERE ANYTHING I NEED TO BRING?Materials are included.Feel free to bring a notepad, if you would like to take some notes, we will provide the rest. INCLUDED IN THE COURSE:You will be provided with useful handouts which contain:– A list of recommended suppliers for both leather and fittings (physically in London and online)– A glossary containing information about leather types and characteristicsHOW LONG IS THIS TUITION?:This tuition will require up to 3 hours to complete.We aim to provide customised and high quality tuition services and by only allowing up to 6 students at a time, we are able to focus on each person needs and interests.As every student has a different level of ability and previous experience, this course might lead some students to complete the core aspects of the lesson in a shorter time frame than others.Students who complete the course early will be welcome to stay and use the studio facilities to exercise on the topics of the lesson.

Learn Traditional Leather Craft, Saddle Stitching And Leather Goods Construction Skills A week-long masterclass offering an in-depth experience of traditional leather craft skills and hand sewing techniques, merging theory with hands-on learning. Dates/times: Five consecutive days - Mon-Fri 10am-5pm Understand the uniqueness of vegetable-tanned leather and the amazing long lasting products that can be created with this material. Proficiently handle traditional hand tools, master various hand-sewing techniques, and understand pattern drafting for the creation of handmade goods. You will gain insights into the technical aspects of leatherworking, including preparation, marking, cutting, gluing, reinforcing, skiving, debossing, finishing, and more. You will create a finished leather bag as well as personalised samples to take home for reference in your future projects.You will conclude the masterclass with the ability to craft entirely handmade leather items and master essential skills such as cutting, finishing, and saddle stitching. You will be taught by a prototype maker and manufacturer with 20 years of experience in this field. Participants also receive valuable handouts and curated lists of leather and tool suppliers for ongoing reference. Leather And Hand Tools: Overview of leather types, tanning, finishing, and best uses Understanding vegetable-tanned leather, how to use it, and how to finish it Importance of choosing the right materials and tools for projects Leather preparation, pattern placement and marking Understanding the cutting of thin and thick leathers and selecting the right cutting tools Using leather punches, skiving, beveling and creasing Finishing leather edges: burnishing and inking Utilising leather glues, tapes and reinforcements Exploration of prototyping and manufacturing leather goods, encompassing varied working methods, machines, and tools. Hand Sewing/saddle Stitching: Saddle stitching leather and understanding related tools and materialsUnderstanding thread types Correctly sewing various leather types, ranging from thin to very thick Sewing straight lines, curves and three-dimensional parts Producing various seams and seam finishes Construction techniques: Sewing and finishing a simple zip on leather Cutting, assembling and sewing simple straps/handles Constructing and sewing common gussets Leather Goods Making: Understanding the basics of pattern making for hand-sewn items and how this differs from machine sewing pattern drafting. Creating a finalised hand sewn leather bag from our designs, choosing colour, materials, reinforcements, hardware and trimmings. By the end of the tuition, you will have: – Developed confidence in utilising specific tools for leather preparation, marking, finishing, cutting and fastening fittings. – Acquired an understanding of working with diverse leather types and thicknesses, with the ability to source and select appropriate tools and materials for your projects. – Mastered essential leather sewing techniques, troubleshooting common sewing issues, and handling challenges such as curves, multiple layers of leather, and three-dimensional objects. – Learned to sew fundamental bag components like simple zips and gussets. – Built confidence in hand sewing, using patterns, and gaining the skills to independently create simple leather items