Cademy logoCademy Marketplace
  • Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

146 Educators providing Other courses in Belper

OtherBelper
Ian Hart Consultancy

ian hart consultancy

Nottingham

In the highly stressful position of school leadership, it is often difficult to get a truly dispassionate view about how well you are doing or what other schools are doing to address particular challenges. Too often, external evaluation is very clear on identifying strengths and weaknesses but offers little in the way of advising on what can be done to address issues arising. With our experience of working with more than two hundred senior leadership teams across England, extensive knowledge of data management and analysis and up to date knowledge of inspection procedures; we can help you gain an objective, accurate understanding of the effectiveness of key areas of your school and will write this up in a way that directly contributes to your school self-evaluation, thus saving you time to spend where it really impacts; with your children and teachers. My Background After a successful 15 year career teaching in a range of different primary schools in different authorities, culminating in Headship, I joined a major public services company in 2008 advising on data analysis and management and school improvement through accurate self-evaluation. As part of this remit, I provided CPD and advice to primary schools across the country. In 2010, I undertook inspection training and became a fully qualified additional Ofsted Inspector. I successfully retained my badge in the reduction of inspectors in 2016 and continued inspecting until 2018, when one-day inspections significantly reduced the need for additional inspectors. During my time on inspection, I worked on behalf of SERCO and then Ofsted directly from 2016. In May 2011, I became a fully independent schools advisor and since then, as well as inspection work, I have worked with over 250 schools Nationwide. The location of these schools has included Sunderland and Teesside in the North East, Manchester and Thameside in the North West, various parts of London and Wiltshire in the South East and West, as well as many points in between! In these schools, I have worked in partnership with them on SEF writing, school advisory work, self-evaluation and school performance information analysis as well as providing both on-site and course training regarding data analysis and curriculum development. As I am not employed by Ofsted and have no ties to local authorities, then you can be sure that the view point I give is objective and based entirely around the evidence available. I work as an advisor to both maintained LA primary schools and Multi-Academy Trust groups.

Training in Electrical

training in electrical

Nottingham,

All of our electrical courses are delivered by highly skilled, experienced electrical staff that have an enormous wealth of practical knowledge and qualifications in the electrotechnical industry. Every member of our team have enhanced CRB checks, hold professional teaching qualifications and possess the appropriate Assessor Awards to make sure that you receive the best learning experience possible. We are a QCF Approved Training Centre and we are registered with Ofqual who regulate qualifications, examinations and assessments in England and vocational qualifications in Northern Ireland. We know that some people just can’t get time off work or have other commitments during the day, that’s why we offer a full range of popular electrical courses 7 days a week, delivered at the weekend and in the evening. From previous experience we know how popular these classes are, so why not take advantage of qualifying with us at a time that suits you. We always listen to our students and we are constantly developing our training to make sure your experience with us is enjoyable and successful. We have excellent success rates with our electrical qualifications and our learners have given us 100% positive feedback. We are always happy for you to see our facilities before joining one of our courses. Here at Training in Electrical we pride ourselves on being a sustainable company and care about the environment in which we all live. Why not read our sustainability policy for more details? Our team are always happy to deal with any enquiries in a friendly, professional manner and will always support you during your time with us. If you have any questions why not give us a call or request a call back? Location Our training centre is ideally located in the East Midlands area. We cater for candidates from all over the UK and offer outstanding facilities, all in a relaxed friendly environment. The training centre is easily accessable by road, rail or tram - and if you’re thinking of staying over there is a hotel next within a 2 minute walk. Looking for evening or weekend courses? If you're new to the electrical industry or are thinking of changing your career, Training in Electrical are here to help you to succeed. Each candidate who enrols onto any of our electrical courses will receive comprehensive course notes prior to the commencement of the course. Why not view our full range of electrical qualifications presently offered as weekend or evening options or call our friendly team who will be happy to advice you on forthcoming classes. Our classes are intentionally kept small so you have the opportunity to fully understand all of the course content at a more relaxed pace. We are committed to delivering quality training at all levels, so you can develop your knowledge and skills to become a competent electrician.

Message
Pawsitive Dog Training

pawsitive dog training

Derby

I have over 20 years of experience in the behaviour and training of dogs and am a member of the Kennel Club Accredited Instructors. I have a Diploma in Canine Behaviour, and am a full member of INTO Dogs, ICAN and The Pet Professional Guild. My passion is working with dogs to help them reach their full potential in a fun, fear free way, whether they are working and competing dogs, fearful rescues or family unit members. I work completely on a positive reward basis, and as an ex Veterinary Nurse I also understand the anatomical and physical restraints that some dogs have, and will work with owners to overcome the problems. I have a special interest in arthritic dogs as per my Canine Arthritis Management qualification. As both a trainer and a behaviourist, I am fully insured and offer both group classes or one to one behaviour assessments and training. Debbie Goodwin Pawsitive Dog Training I run a Rescue and Rehoming Service for my breed, Papillons, and I have extensive knowledge on rescue dog behaviour, particularly the fearful foreign dogs. I regularly, successfully compete in agility, scentwork, showing and obedience myself. Behaviour consultations typically last an hour (or more if needed) to enable me to understand your dogs issues, to suggest a way forward and to start a programme. This will be followed up with a full written history and plan. Follow up visits very much depend on the issue, the implementation of the behaviour modification plan and the individual dog. General Training for dogs and puppies can be in either a class situation or one to one training. Some dogs do really well in class, whilst others need some one to one training first, especially where a class situation is too stressful. Again, it is very much dependent on what you wish to achieve with your dog, the dog itself, and its progression as to how many sessions you will need. To book a consultation or training session please complete the Questionnaire which can be sent by e mail or downloaded here, e mail to dogpawsitivetraining@yahoo.com and I will ring you to book an appointment. If you would like to discuss your requirements prior to this, please telephone me on 07956 547769 and I will be very pleased to answer your questions at no extra charge. Consultations normally last a minimum of 1 hour and are carried out in your own home at a time which is convenient to you. It is helpful for the whole family and any other carers to be present. The cause and motivation for the behaviour will be fully explained and a staged programme of behaviour modification advised. You will receive a written report and advised of follow up visits. I am able to provide a secure field for training on a Sunday afternoon so please contact me if required.

Message
Ajw Football Academy

ajw football academy

London

AJW Distribution Ltd is an independently owned company that supplies roofing, cladding, and general building materials to various contractors, builders, building merchants, and the general public. At AJW Distribution, we believe that service is the most important part of what we do. As a result, we always go that extra mile to satisfy our customers’ needs and requirements. We stock a wide range of industry-leading brands, so you can rest assured that product quality is also at the forefront of our mind. A brief history of AJW We were established in 1998, and over the years, have proudly built a reputation for offering a great personal service. During this period, the company has established five depots in East Anglia and the surrounding regions. As a result, we serve customers all over the region and further afield with our industrial and agricultural offerings. Our head office is based in Chatteris, Cambridgeshire, and this was our first location. In 2020 we relocated our Chatteris branch to a different Chatteris location, offering a better experience for our customers. Our second branch, in central Norwich, opened in 2002, whilst our third site opened in 2007, based in Witham, Essex. The AJW Roofing portfolio expanded further in November 2014 with Sawston, Cambridge depot and then our Bury St Edmunds depot was opened in July 2018. We have recently added to our portfolio with opening our 6th depot in May this year in St Neots. AJW Distribution is owned and managed by Alan Woods, a well-known figure in the industry whose experience and knowledge spans five decades. (That’s a lot of knowledge!) After working in various management and executive positions within the roofing industry, Alan established AJW Distribution as a partnership in 1999. He acquired his partner’s shareholding in 2002 and has been responsible for driving the company forward ever since. Why choose AJW? Over the years, we have matured to become one of the region’s largest and most trusted distributors of roofing and cladding materials for the industrial, agricultural and domestic markets. Alongside our local depots for trade and public customers, AJW Distribution also has two dedicated sales offices for Industrial roofing and agricultural products. Our Central Industrial Sales is based at Sawston, and our other Industrial Sales team is based in Leicester. As a family business, our staff mean everything to us! This is reflected in the quality of the staff we employ. We understand how important expert knowledge is to our customers. As a result, each valued member of our team has been handpicked for their long experience in the industry and extensive products. We have great relationships with our suppliers! As we previously said, we stock and supply roofing and cladding materials from the very best in the industry. We work closely with our suppliers to ensure that we are always kept up to date with lead times, new product releases and maintaining great pricing for our customers.

Greensville Learning

greensville learning

Nottingham

GLC is a non-profit center for students with learning differences and/or Attention Deficit Disorder. We are the first replication site of The Hill Center in Durham, NC and have been serving area students with learning differences since 2002. Our Vision The vision of GLC is to make this successful teaching method available to as many students in Pitt County and the surrounding counties, as possible. GLC will continue to serve the needs of Pitt County students by working in partnership with Pitt County Public Schools and area private schools. It is also our goal to work with families and students in need of financial assistance by offering scholarships. In addition, GLC hopes to cooperate with ECU as a resource for future teachers and as an official internship site and volunteer service center. We look forward to becoming a vital resource for the east. Greenville Learning Center does not discriminate on the basis of race, color, national and/or ethnic origin in administration of its educational policies, admissions, scholarship programs, or any other administered programs. Mission Statement Greenville Learning Center enables students with learning differences and/or Attention Deficit Disorder to achieve their full potential and to become confident, independent learners. History The doors of Greenville Learning Center opened in the fall of 2002. It was the vision of three local families who shared the need for this type of school for their children and others in Pitt County. In 1997 they sought the guidance of The Hill Center and began the process of modeling their successful program. Over the past years, we have served students from the following schools: A.G. Cox Middle School Ayden Grifton High School Belvoir Elementary Chicod School Christ Covenant School Eastern Elementary EB Aycock Middle School Elmhurst Elementary School The Epiphany School of Global Studies Falkland Elementary Hope Middle School John Paul II Catholic High School North East Carolina Prep The Oakwood School Our Lady of Perpetual Hope – Rocky Mount, NC PS Jones Middle School Ridgewood Elementary Rose High School South Central High School South Greenville Elementary School St. Peters Catholic School Wahl Coates Elementary School Washington Montessori – Washington, NC Wayne Christian School Wintergreen Intermediate Wintergreen Primary School Words from a founding parent As one of the founders of GLC and parent of an alumni student, it has been amazing to watch the journey of this little school develop. In the beginning, many thought it would be impossible to start such a project in eastern NC, but the determination of three mothers cannot be underestimated. The idea began to take root in 1997 after a visit to The Hill Center in Durham. It was determined by the three founding families at that time to make an investment and to begin to hire teachers to train in The Hill Center Methodology. Laura Bruce Hadley Nichols came on board and eventually became the school’s director. Dr. Michael Priddy who was a superintendent of Pitt County Public Schools at the time, made the trip to Durham with the founding mothers along with Mr. Larry Seigler (GLC board member), and Dr. Marilyn Sheer (previous Dean of ECU School of Education). We met with The Hill Center professionals and Dr. Priddy and decided that GLC would be a great partner with Pitt County Schools. The meeting was successful and afterwards Dr. Priddy granted transfer credit to GLC from Pitt County Schools. From this point on, GLC has been helping children throughout Pitt County meet their academic potential and feel good about who they are even though they learn differently.

Message
Djanogly City Academy

djanogly city academy

Nottingham

I hope that as you explore our website, you get a real flavour of the unique culture and strong ethos that exists within our school. Our aim is very simple. We want every Scholar that attends our school to leave us with a wide choice of life destinations and career paths, intent on making a positive difference to our world. The determination of staff and governors to achieve this goal is very strong and is based on a simple but direct strategy

Message
1...131415

Courses matching "Other"

Show all 728

Vaccination / Injection Course (GPT601)

4.6(39)

By Geopace Training

Learn how to administer vaccines or injections ... Nationally Recognised Qualification Includes IM, ID and Sub-Cut Injection methods OCN Accredited - Level 4 (Foundation Degree - FDSc) Covers all steps to safely perform a vaccination Use same techniques and skills for aesthetic therapies Includes B12, Vitamin C and other treatments Essential qualification for all injections Basic understanding of English language required OPEN TO ALL APPLICANTS

Vaccination / Injection Course (GPT601)
Delivered in Liverpool + 4 more or Online + more
£195

Advanced Phlebotomy - Skills & Techniques (GPT005)

4.6(39)

By Geopace Training

The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6) FDSc (Foundation Degree Level) qualification Nationally Recognised certificate Dually accredited: Open College Network and CPD Covers both aspirated and evacuated systems Covers specialised blood collection systems & methods Classroom or Virtual Classroom learning options Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep) Complete your training from beginner to advanced level This course either follows on from our Introduction to Phlebotomy Course or can be combined with our introductory course as part of a course package (see below) Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.

Advanced Phlebotomy - Skills & Techniques (GPT005)
Delivered in Liverpool + 20 more or Online + more
£195

PLC 10

4.7(1243)

By Technique Learning Solutions

We have an extensive range of PLC training courses available covering all PLC manufacturers and levels of expertise from the complete novice to the advanced. ALL of our training courses can be tailoured to your own requirements. ALL our courses will be based on the relevant software and hardware. We aim to make ALL our courses as practical as possible, leading to ‘real world’ skills and not just theoretical skills. No prior knowledge is required for this course as it starts from scratch and assumes no previous experience, you will reach the skilled level where you can look at becoming a programmer, get into engineering maintenance in an industrial environment, fault find or make amendments to programs, this is the course for you. The ‘Typical’ 10 day level 3 course usually covers 2 or 3 of the major manufacturers, Siemens S7, Allen Bradley and Mitsubishi (This can be amended to other manufacturers if you have a particular requirement). The course aims to be 90% practical, as we believe the easiest way to learn is to do it! Every student works on their own dedicated training rig and computer, enabling you to get the most from the course. A full set of course notes and a USB drive full of other manuals is provided at the end of the course. We can also cover a wide range of manufacturers including : Siemens Step 5 PLC Training (Using Step 5, Quadriga or Others) Allen Bradley PLC 3; 5 Training (AB6200 Software) RSLogix 5 PLC Training SLC PLC Training (RSLogix 500) ControlLogix PLC Training (RS Logix5000) MicroLogix PLC Training (RSLogix 500) S7-200 PLC Training (Step 7 Micro) S7-300 PLC Training (Step 7 or TIA Portal) S7-400 PLC Training (Step 7 or TIA Portal) Kuhnke PLC Training (Kubes) Omron PLC Training (Syswin) Modicon PLC Training (ProWorx and Others) Mitsubishi PLC Training (Medoc, GX Developer, GPP & Others) Toshiba PLC Training GE Fanuc PLC Training GEM 80 PLC Training Telemecanique PLC Training Most other PLC manufacturer training undertaken. We also cover a wide range of SCADA Systems to enable engineers to modify and add to existing screens, fault find through systems, set up communications etc.

PLC 10
Delivered in Clay Cross + 1 more or Online + more
£500

PLC 5 Day

4.7(1243)

By Technique Learning Solutions

We have an extensive range of PLC training courses available covering all PLC manufacturers and levels of expertise from the complete novice to the advanced. ALL of our training courses can be tailoured to your own requirements. ALL our courses will be based on the relevant software and hardware. We aim to make ALL our courses as practical as possible, leading to ‘real world’ skills and not just theoretical skills. No prior knowledge is required for this course as it starts from scratch and assumes no previous experience, you will reach the skilled level where you can look at becoming a programmer, get into engineering maintenance in an industrial environment, fault find or make amendments to programs, this is the course for you. The ‘Typical’ 5 day course usually covers 2 or 3 of the major manufacturers, Siemens S7, Allen Bradley and Mitsubishi (This can be amended to other manufacturers if you have a particular requirement). The course aims to be 90% practical, as we believe the easiest way to learn is to do it! Every student works on their own dedicated training rig and computer, enabling you to get the most from the course. A full set of course notes and a USB drive full of other manuals is provided at the end of the course. We can also cover a wide range of manufacturers including : Siemens Step 5 PLC Training (Using Step 5, Quadriga or Others) Allen Bradley PLC 3 & 5 Training (AB6200 Software) RSLogix 5 PLC Training SLC PLC Training (RSLogix 500) ControlLogix PLC Training (RS Logix5000) MicroLogix PLC Training (RSLogix 500) S7-200 PLC Training (Step 7 Micro) S7-300 PLC Training (Step 7 or TIA Portal) S7-400 PLC Training (Step 7 or TIA Portal) Kuhnke PLC Training (Kubes) Omron PLC Training (Syswin) Modicon PLC Training (ProWorx and Others) Mitsubishi PLC Training (Medoc, GX Developer, GPP & Others) Toshiba PLC Training GE Fanuc PLC Training GEM 80 PLC Training Telemecanique PLC Training Most other PLC manufacturer training undertaken. We also cover a wide range of SCADA Systems to enable engineers to modify and add to existing screens, fault find through systems, set up communications etc.

PLC 5 Day
Delivered in Clay Cross + 1 more or Online + more
£500

18th Edition Wiring Regulations City and Guilds 2382-22

4.7(1243)

By Technique Learning Solutions

Course Description: The 18th edition course is a 3 day short course aimed at anyone involved in the design, construction and inspection and testing of electrical systems, also a nationally recognised ‘must have’ qualification for companies seeking to recruit electricians. It is intended to introduce the candidate to a working knowledge of the Wiring Regulations along with a brief overview of the Electricity at Work Regulations covering their statutory duties. Previous knowledge of the regulations is not assumed, however, a fundamental knowledge of electrical principles is assumed. Please be aware that the Wiring Regulations course is not designed to teach you every regulation in the book but it will teach you the best practices on how the reference the latest regulations as you would on the job. As such key topics currently covered on the 17th Edition will still be included. We have been delivering Wiring Regulations courses for many years and although it is mainly theory based you cannot beat real training in a real classroom. By training with other people in your class you will benefit from being able to ask relevant questions as well as finding the answers to many questions from your fellow students that you may not have even thought of. The examination is a 2 hour multiple choice, open book PC based examination with instant results. The course cost includes examination entry fees. Focus: You will study the latest standard of the IET wiring regulations, including essential subjects such as safety, selection and erection of electrical equipment. There are 8 key modules and current amendments: Section 1 – Scope, Object and FundamentalsSection 2 – DefinitionsSection 3 – Assessment of general characteristicsSection 4 – Protection for SafetySection 5 – Selection and Erection of equipmentSection 6 – Inspection & TestingSection 7 – Special Installations or locationsSection 8 – Functional Requirements This course does include the latest amendments such as: Electromagnetic Disturbance Surge Protection Medical locations Operating and Maintenance Gangways Arc Fault Detection Devices (AFDDs) Changes to fire safety requirements in chapter 422, covering the design of electrical installations in industrial, commercial and multiple-occupancy homes, as well as new information for ‘protected escape routes’ Protection against over voltages Changes across Part 7: Special Locations This classroom based course will show, teach and perfect you on how to reference and use the book for situations that you will encounter while working in the field.

18th Edition Wiring Regulations City and Guilds 2382-22
Delivered in Scotland + 1 more or Online + more
£500

C&G 2391-50, Initial Verification of Electrical Installations

4.7(1243)

By Technique Learning Solutions

The City and Guilds 2391-50 electrical course has been designed to meet the needs of the electrical installation industry, and is aimed at practising electricians who have not carried out inspection and testing since qualifying or who require some update of training before going on to other City and Guilds qualifications. Candidates who achieve the City and Guilds 2391-50 qualification could progress on to the City and Guilds 2391-51: the Level 3 Certificate in Inspection, Testing and Certification of Electrical Installations. The City and Guilds 2391-50 course will focus on the teaching and learning of initial verification and certification of electrical installations. In order to claim the full City and Guilds 2391-50 qualification, students must successfully complete: One 1 hour 30 minute online multiple choice test to be completed during the courseOne 3 hour 30 minute practical test to be completed after the course, broken into two sections as follows:Task A – Initial Verification and Certification of the Complete Installation – 2hrs and 30minsTask B – Short Answer Questions – 1hr To further support this course, we offer a 1 day practical workshop (at the cost of £120.00 Net VAT) available to candidates who have completed the course and require further ‘hands on’ practical experience prior to their practical exam. Most students who take this option elect to complete this the day before their practical assessment. The City and Guilds 2391-50 course costs include examination entry fees.

C&G 2391-50, Initial Verification of Electrical Installations
Delivered in Clay Cross + 1 more or Online + more
£120

C&G 2391-51, Periodic Inspection and Testing of Electrical Installations

4.7(1243)

By Technique Learning Solutions

City and Guilds 2391-51, level 3, is ideal for people with limited experience of periodic inspection of electrical installations. If you are already working as an Electrician, but have not carried out inspection and testing since qualifying, or you require to update before moving onto other qualifications, then this 5 day City and Guilds 2391-51 course will be right for you. City and Guilds 2391-51 Course Content: Principles, practices and legislation for the periodic inspection, testing and condition reporting of electrical installations. Requirements for completing the safe isolation of electrical circuits and installations Requirements for inspecting, testing and recording the condition of electrical installations Requirements for completing the periodic inspection of electrical installations Differences between periodic inspection and initial verification Requirements for safe testing of electrical installations which have been put in to service Requirements for testing before circuits are live. Requirements for testing live installations Understanding and interpreting test results Requirements for the completion of electrical installation condition reports and associated documentation Confirmation of safety of system and equipment prior to completion of inspection, testing and commissioning Carrying out inspection of electrical installations prior to them being put into service Ability to test electrical installations prior to them being put into service Produce a condition report with recording observations and classification In order to claim the full City and Guilds 2391-51 qualification, students must successfully complete: One x1 hour 30 minute online multiple choice (Open Book) Exam to be completed during the course One x3 hours 30 minute practical test to be completed after the course, broken into sections as follows: Task A – Visual Inspection – 30mins Task B – Periodic Inspection and Test – 2hrs Task C – Short Answer Questions – 1hr To further support this course, we offer a 1 day practical workshop (at the cost of £120.00 Net VAT) available to candidates who have completed the course and require further ‘hands on’ practical experience prior to their practical exam. Most students who take this option elect to complete this the day before their practical assessment. The City and Guilds 2391-51 course costs include examination entry fees.

C&G 2391-51, Periodic Inspection and Testing of Electrical Installations
Delivered in Clay Cross + 1 more or Online + more
£120

Communication Skills 1 Day Training in Derby

5.0(1)

By Mangates

Communication Skills 1 Day Training in Derby

Communication Skills 1 Day Training in Derby
Delivered In-Person + more
£595 to £795

Building Better Careers with Soft Skills: 1-Day Workshop in Derby

By Mangates

10 Soft Skills You Need 1 Day Training in Derby

Building Better Careers with Soft Skills: 1-Day Workshop in Derby
Delivered In-Person + more
£595 to £795

Communication Skills 1 Day Training in Nottingham

By Mangates

Communication Skills 1 Day Training in Nottingham

Communication Skills 1 Day Training in Nottingham
Delivered In-Person + more
£595 to £795
Show all 728

Search By Location