• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

204 Educators providing Legal courses in London

Tax Efficient Review

tax efficient review

London

This Website is the property of TER and is protected by copyright and intellectual property laws. All rights reserved. You may download or print out a hard copy of individual pages and/or sections of the Website, to the extent reasonably necessary for your use of the Website, and provided that you do not alter the material in any way. You may not reproduce, retransmit, disseminate, sell, publish, broadcast, or circulate the information without the express written consent of TER. As an exception to the above prohibitions, if you are a Subscriber who is regulated by the Financial Conduct Authority, TER provides permission for you to circulate the information to your clients provided that no charge is made. Nature of Service Tax Efficient Review does not provide investment advice on this Website and does not purport to do so. This website is provided for informational purposes only. This information does not constitute advice on investments within the meaning of Article 53 of the Financial Services and Markets Act (Regulated Activities) Order 2001. Should investment advice be required this should be sought from a FCA authorised person. Disclaimers The site is created and maintained by Tax Efficient Review with the utmost care. However, Tax Efficient Review cannot guarantee the accuracy, completeness, timeliness, or correct sequencing of any of the information on this Website, including, but not limited to information originated by Tax Efficient Review, or gathered by Tax Efficient Review from publicly available sources. There may be delays, omissions, or inaccuracies in the information. You agree that Tax Efficient Review shall not have any liability contingent or otherwise for the accuracy, completeness, timeliness, or correct sequencing of the information and that Tax Efficient Review cannot be held liable (whether in contract, by tort, or otherwise) for any direct, special, indirect, incidental, punitive, exemplary, or consequential damages (including, without limitation, loss of time, revenues, profits, clients, data, etc.) for any decision made or action taken by you in reliance upon the information on this Website, or for interruption of any data, information, or any other aspect of this Website. Tax Efficient Review does not make any representations about the suitability of the information, contained in this Website. All such information, products, and services are provided 'as is' without warranty of any kind. Product specifications and prices are subject to change without notice. Tax The investments and other services and transactions referred to on the Website may have tax consequences and it is important to bear in mind that TER does not provide tax advice. The levels and bases of taxation can change. You should consult your own tax advisers in order to understand any applicable tax consequences. General public Some of the investments or services referred to on the Website are not available to the general public. Accordingly, access to certain product information is only available to Qualifying Subscribers who have accepted TERs Terms and Conditions and to whom TER have issued a user name and password. General and Governing Law In interpreting these Terms of Use it is not intended that the headings should be taken into account. If any provision of these Terms of Use is held to be unenforceable, then these Terms of Use shall be deemed amended by modifying such provision to the extent necessary to make it enforceable while preserving its intent or, if that is not possible, by substituting another provision that is enforceable and achieves substantially the same objective and economic result. These Terms of Use shall be governed and interpreted in accordance with English law. Any legal action or proceeding with respect to these Terms of Use shall be brought before the competent courts of London. Cookies We use cookies to help improve your experience on the Website. If you continue, we will assume that you are happy to receive all cookies on the Website. Information on deleting or controlling cookies is available at www.AboutCookies.org. Please note that by deleting our cookies or disabling future cookies you may not be able to access certain areas or features of our site.

A-list Film Production Pro

a-list film production pro

London

ably. Productions Inc.: a production company that deals in all aspects of creative projects from film and television production to CD manufacturing http://www.acepix.com Ace Pix International, Inc.: a full in-house motion picture / television production and distribution company http://www.ancientpictures.comAncient Pictures: a Seattle-based motion picture and commercial production Company, as well as a networking center for writers to meet, enhance their skills and network in the film industry http://www.apotheosispictures.comApotheosis Pictures Productions: an independent film production company and the developers of the ScreenForge screenwriting software for Microsoft Word. ScreenForge is the best and most affordable screenplay formatting software available for MS Word, and a viable alternative to the much more expensive stand-alone screenwriting programs Armageddon Productions: creators of the 1997 home video release "Bloodletting," they develop and produce feature films, digital visual effects and music and movie soundtracks. They have also developed screenplays for other companies, such as Full Moon Pictures' "Witchouse" and "Alien Arsenal," and Regent Entertainment's upcoming "The Brotherhood" Assembler Films: a company that has shot and released films in Italy, Japan, India, the U.S. and Canada, to name a few Belarus Productions: Minsk-based independent production company, providing assistance to film-makers and broadcast journalists. TV production, film production, crew hire, equipment rent and location scouting in Belarus Black Cab Productions: an independent film, music, and literary production company specializing in horror, bizarre, and dark works http://www.blackfishfilms.comBlackFish Films: quality international productions specializing in non-broadcast projects for educational, military and corporate projects. Shooting 16, 35 and 70mm. Free goodies for independent producers Blokland Pictures: specializing in the development, production, and distribution of feature film drama; serving the international specialty marketplace http://www.angelfire.com/tn/tcthepackrat/bloodyfun.htmlBloody Fun Pictures: no-budget video/filmmaking, since 1996 http://www.bwave.f9.co.ukBrainwave: in the business of producing their own peculiar brand of entertainment for over a decade: films, radio plays, songs, etc. on the smallest budgets imaginable http://www.brilligprods.comBrillig Productions: exploring creative areas of filmmaking; developing narratives that range from the fanciful to the bizarre, visual designs that push the limits of independent cinema, and story-telling techniques that are inspired and inspirings http://www.c21etv.comC21ETV: one-stop-shop providing multimedia design, implementation and programming, VCD business cards production, video/TV production, digital, broadcast, industrial, post production http://www.cabiriafilms.com Cabiria Films, Prague: Filming in East Europe – locations & production services Cambridge Films: an independent production company http://www.cinedictum.com Cinedictum: a production company which produces cinedicta. Described as a form of film-aphorism, cinedicta are very short films whose concise narrative holds both entertainment and moral value, while addressing universal themes http://www.commercialfactory.comThe Commercial Factory: specializing in the production of high-quality television commercials, from the original idea to broadcast ready http://www.cotenfilms.comCoten Films: an independent film production company specialising in corporate and private video work, Web design and new media. Responsible for the action comedy feature film "Cop on the Edge IX" and the forthcoming "Days' End" http://www.crystalpyramid.comCrystal Pyramid: broadcast video production company in San Diego, California http://www.homestead.com/degalazare/dlp.htmlDega Lazare Productions: movies and other multimedia productions being made in the small town of Kahnawake by teens. From action/adventure to horror and comedy, it's all there http://www.dereko.tvDereko Entertainment: a small, independent and privately held feature film production company based in Los Angeles, California. Whose goal is to produce and release one or more feature films per year, both domestic/international territories Documentary Educational Resources (DER): produce, distribute and promote anthropological and documentary films and videos http://www.doublegproductions.comDouble G Video Productions: a video productions company providing a wide range of service and talent bank for your productions needs. "From gold to gold let Double G video productions get your story told!" http://www.egygrip.comEgygrip: a skilled team of professionals based in Egypt, and capable of managing every step of the video or film production process from concept to compeletion Emerald Oceans Entertainment: a multi-media company with film and music divisions. Founded in 1995 as a film production company it has evolved into its current broader base, which is helping it establish its place in the industry Eye Light Media: creating films, videos, music and Web sites from a Christian world view The Farnham Film Company: a UK-based TV production company interested in co-production–particularly of children's programming http://www.angelfire.com/film/file5home/about.htmlFile5 Productions: producer of market-specific sports videos by writer-director-actor David Lima http://www.filmforum.comFilm Forum: New York's leading movie house for independent premieres and repertory programming http://www.fireflyonline.comFirefly Entertainment: established in 1994 to allow aspiring talents and interested persons to achieve their goals in film, television, and theatre. The group has won multiple awards, is comprised of members of all ages, and is based in west central Pennsylvania http://www.footlooseproductions.com/Footloose Productions: film and video production company specializing in documentaries, commercial films, photo shoots, movies, and music videos http://www.fourhorsemenfilm.com/Four Horsemen Films, LLC: an independent film production company in New Jersey http://www.angelfire.com/movies/gmcproductions/gmc.htmGMC Productions: teenage independent film makers on a low budget. See screening room with video clips, and check out past films Goldader Film Productions GmbH: creates and produces feature films, TV movies, commercials, music videos, 3-D animated shorts, interactive CDs and DVDs, educational and corporate films, CDs and DVDs Gulliver Media Australia: producing award-winning television documentaries and videos Harrington Productions: content creators for video, film and new media. Based in Maui, Hawaii, they supply field production packages, crew and post production. Client list includes ABC-Sports, ESPN, E! Entertainment, NBC, BBC and The Discovery Channel http://go.to/headscrewHeadscrew: working entirely in the film medium, they provide affordable commercial shoots for local Seattle businesses, create traditional clay, cel, line and computer animations and also stage location shoots for studios who are unable to re-locate a full crew for short periods of time http://www.focusfilms.comHocus Focus Films, Israel: Filming in a foreign country could sometime become a metaphysic experience. In Israel, life itself is. To cut Red Tape, achieve Green Lights, and avoid Blue Holes. Contact a production house that can accommodate all your needs http://www.hollywoodpa.comHollywood PA: the world's first Global Movie Set. This is an independent film, shot in Central Pennsylvania. You were able to watch it live from the set, interact with the cast and crew and discover the passion and pain in filmmaking http://www.iconent.comIconoclastic Entertainment: dedicated to finding and creating the finest screenplays on the planet http://www.imageproducers.comImage Producers: a full service video and multimedia production company working on a local, regional, national, and international basis. Their creative staff works together to develop the concept, write the script, shoot the footage, and take the project through post-production to deliver the finished product http://www.ipcfilms.comIPC Films: IPC is a production company looking for ideas, projects, scripts, talent, and investors http://www.jam-productions.comJam Productions a San Francisco Bay Area video/film company that does broadcast quality commercials, special event filming, indie film projects, multi-media and more http://www.jamsessionfilms.comJam Session Productions: a minority/woman-owned midwest-based film and multimedia company whose projects have included music videos, commercials and PSA's, training films, industrial films, TV program segments and more Janson Media: an international program sales and distribution company, a "content" company. We have licensed programming to over 180 countries around the world. Please see our Clients page, for a fairly complete list of the broadcasters and cable and satellite networks to whom we license programming http://www.jetifilms.comJeti Films: an independent film company based in Louisiana http://www.kaizenfilms.comKaizen Films: their mission is to develop new technologies and techniques to enhance the production of motion pictures, while maintaining cinema as an art form http://www.kineticimage.comKinetic Image Co., Ltd.: an Ohio-based motion picture production company that, for nearly twenty years, have specialized in creating exciting motion picture entertainment on budgets that would shame a cat. They created a number of well-received cult items which have graced the schedules of the USA Network and Cinemax http://www.kiwifilm.comKiwi Film & Video, Asia: a Hong Kong and Singapore based film and video production service company catering to a broad range of clients from around the world; fully-equipped camera crews is their specialty http://www.ltfilms.comLarry Taylor Productions: dedicated to providing creative projects for family entertainment, including movies and television programs, as well as the construction of a new and unique style of theme park. The vision: To put the heart into every picture. http://www.leafpile.tvLeaf Pile TV: Tune In: This TV variety program is filled with a swarm of segments composed of local events and artist interviews which provide musical entertainment and hilarious sketch comedy. Leaf Pile also has freelance videography for your major rock video or demo. Check out our exclusive camera packaging http://www.littlerickyproductions.comLittle Ricky Productions: feature films that reach the moral conscience of America http://www.mecfilms.comMatrixx Entertainment: The World's First Virtual Movie Studio(tm). Services include: producing, financing and distributing independent feature films; Web site, production and legal consulting for entertainment clients; books and manuals on filmmaking and more Media Movers,Inc.: full service localization company offering services in dubbing,subtitling,voiceovers & production in Asian, Indian & European http://members.aol.com/mptvMPTV: offering on-location video production, graphics and animation design, AVID video post production, Macromedia Director authoring, and many more services http://www.mptv.commptv.com: Film, video and audio production and distribution http://www.mundiali.comMundiali Entertainment: providing a venue for the production of lower cost motion pictures ($15 and $20 million each) and television programming (based on a cooperative agreement between Mundiali and either a television network or special project investors) http://members.tripod.com/%7EOverboardProductionsOverboard Productions: an independent film production copmpany headed up by Matt Fore http://www.angelfire.com/ga/PARALLELAFTERNOONParallel Afternoon Productions: independent thinkers with a vision that strives to be unequaled http://www.peacerecord.comPeace Record Company: a multi-faceted audio/video production company offering video editing, acting video demo production, video/audio tape duping, video projection and sound systems rentals, wedding videos, on location multi-camera video recordings of special events and more http://www.phproductions.comPH Productions: services include business and personal consulting and coaching, project development, script writing, video production, video biographies, television programs, infomercials, commercials, photography and 3-d animation http://www.psavideo.comProduction Services Arizona: since 1971, providing quality, production services in the areas of video, multimedia, and animation graphics. Serving clients worldwide from Korea to France, South America to Canada in medium to high budget corporate marketing and training venues. Full collateral support through PS/A's graphics dept. Rawbass: design and production of all types of artistic media http://www.rcwmediaworks.comRCW Media Works: an independent production company that realizes that it is not the size of your budget that determines quality, it is the dedication and heart that you put into your projects http://www.realitycrash.comReality Crash Productions: showcases original and creative projects from writers, artists, film makers and critics. They are looking for people to contribute to the site. You retain full rights for your work and a web page is provided for you http://www.revivalentertainment.com/Revival Entertainment: this team is producing films of the highest quality in Surrey England http://www.riggedproductions.comRigged Productions: film and video, cartoons and art, writing, music and audio, and other works http://www.riverproductions.comRiver Productions: an independent film company located in Los Angeles, CA, headed by Michael J. Isgrig (writer, director, producer), Lynn C. Grant (writer, producer) and Kym R. Wulfe (executive producer, head of business and legal affairs) http://www.roman-pictures.comRoman Pictures: a motion picture production company which primarily produces "budget-controlled" feature-length movies that are licensed for distribution and exploitation in the direct-to-video, cable, TV and satellite markets http://www.runningdogfilms.co.ukRunning Dog Films: a new British film company dedicated to making films using cheap and affordable technology combined with proven no/lo budget production practices http://www.shadesofday.comShades of Day: the art of independent film and video producing. Extensive database of cinema related resources http://www.sharpshootertv.comSharpshooter Worldwide: a television production company that specializes in on location filming, any where in the world. Their motto is: "We don't go after awards or publicity. We just do the work." http://www.smileycrew.comSmiley Crew Productions: a California-based film crew specializing in both TV and film. Their main agenda focuses on their popular cable access comedy show, and their pro creative, anti "trend" statements http://www.smorgasbordproductions.comSmorgasbord Productions: a small company involved in the production of multimedia. Film, video, animation, graphic art and comic books are their products Starsmead Production Ltd: comprehensive production services for television and film http://www.studiosatlascolinas.comThe Studios at Las Colinas: a full-service production and entertainment facility located in the heart of the Dallas/Fort Worth Metroplex; offering complete music, film, video, and multimedia production capabilities, as well as parties and events hosting http://www.suedeinteractive.comSuede Interactive: an in-house production facility (located in the NY Metro area) for radio and TV commercials, audio/video/film productions and Internet services (Web site design, search engine placement, e-commerce and hosting) http://www.tafproductions.comTAF Productions: an independent production company, based in the Netherlands, that specializes in executive and unit production services. Additionally, they create their own screen productions Tangled Web Productions: a feature film production company that writes, directs, and produces their own projects. They currently have four projects in development http://www.telenet.bc.caTelenet Communications: video, audio and multimedia production using DV cameras, non-linear editing software and audio foley Terrazas Video: Southern Arizona's largest production facility. Film, video, grip, lighting and stage. Visit their Web site for a complete list of resources TEWS Entertainment: founded by Tim Sullivan and Erik Woods in 1995, responsible for "Of Fortune and Glory," winner of the Best Picture award at the 2000 REwind Video Awards in Calgary http://www.thrae.comThrae Entertainment: your source for no-budget moviemaking on the Web. Provides information and insight into the world of movies without the burden of large financial resources, a place for moviemakers to share their experiences and information about their films http://www.torontopictures.comToronto Pictures: a production company, with its own film-school. Under the leadership of internationally-awarded film director, writer and producer Bruno Pischiutta, they specialize in producing feature films, documentaries and TV series http://www.transworldvideo.comTransworld Video Productions: from idea to shrink wrap; Cable TV to Network. Duplications and conversions to the world formats: NTSC, PAL, SECAM http://www.twodollarpistol.comTwo Dollar Pistol Films: specializing in the writing and production of independent feature films, shorts and documentaries and providing a wide array of digital production services for independent, private and corporate projects http://www.unknownproductions.comUnknown Productions: independent movie production with distribution from Cinematrix releasing, giving the world another entertainment choice http://1aindfilm.twoffice.comVariety Plus Enterprises, Inc.: serving the lower Westchester and New York City community since 1984. They specialize in creating stories, screenplays, and feature length motion pictures http://www.waterfrontchicago.comWaterfront Productions: a Chicago, Illinois-based production company that shoots and edits complete projects on film and video. Separate packages are available for just shooting or editing, if needed http://www.whodat.comWho Dat Music Productions: in Astoria, New York, is the developer of the Who Dat AudioLogo® brand identity for the Internet. We have produced elements for CD-ROM, DVD, Streaming Media for the Internet, Web Site Developers, Multimedia Productions, Interactive Productions, Original or Library Music for Film and Video, Narrators and Voice Over Talent, Web Casting, Corporate Presentation and the entire production if necessary http://www.worldwidefilmworks.comWorld Filmworks: a company designed to create musical/theatre productions, music videos, commercials, and short films, with an eye toward the ever-increasing presence of the Internet as the future of distribution http://www.youngmankang.comYoung Man Kang Films: a writer/director with more than 20 films and more than 50 TV commercials in his portfolio http://www.zone5pictures.comZone 5 Pictures: the source for all of your business media needs, including film and video production, studio photography, Web development, graphic design, feature films and animation/3D

Moderntronics

moderntronics

Harrow,

In these terms and conditions (“Conditions”) the following expressions shall have the following meanings: “Business Day” means any day other than Saturday, Sunday or a public holiday. “Business Hours” means the hours detailed in Condition 32 below. “Contact Hours” means Monday to Friday (inclusive) from 07:00 hours to 17:00 hours but excluding bank holidays. “Contract” means any contract between MT and the Customer for the supply of Hardware and/or Software (with the associated Licence) and/or services which is subject to these Conditions. “Customer” means any person, firm or company who enters into a Contract with MT to which these Conditions apply. “Force Majeure” means any event outside the reasonable control of either Party affecting its ability to perform any of its obligations (other than as to payment) under these Conditions. “Goods” means all or any tangible or intangible goods or intellectual property including but not limited to Hardware and Software which are provided to a Customer in accordance with these Conditions. “Hardware” means any hardware provided by MT to the Customer. “MT” means MODERNTRONICS Ltd. or its servants and agents as the case may be. “Insolvency Event” means any one of the following in relation to the Customer: (i) a notice being issued to propose a resolution for winding up or dissolution, or such a resolution being passed; (ii) a petition for a winding up or an administration or bankruptcy order being presented, or such an order made; (iii)any steps being taken with a view to a voluntary arrangement or other assignment, composition or arrangement with all or any creditors or any moratorium, readjustment, rescheduling, forgiveness or deferral of all or any indebtedness; (iv) suspension of payments to all or any creditors and/or ceasing business; (v)an encumbrancer taking possession of all or any assets; (vi) an administrator or receiver being appointed over the Customer or all or any of its assets; (vii)any action anywhere similar or analogous to any of the foregoing; or MT reasonably believing that any of the foregoing is imminent. “Licence” has the meaning attributed to it in Condition 23 below. “Minimum Term” means the term set out in Condition 17 below. “Party” means MT or the Customer and “Parties” means both of them. “Response Time” means two Working Hours from an initial call to the hotline under Condition 26 or 28 below. “Seminar” means any seminar provided by MT. “Service Operator” has the meaning given to that term in Condition 28 below. “Site” means https://www.moderntronics.com and all subdomains including (but without limitation) “Software” means software or software updates or upgrades provided by MT and licensed to the Customer under Condition 23 below. “Training Sessions” means any training session provided by MT. “Working Hours” means the hours between 9:00 to 17:00 on any Business Day 2. Interpretation In these Conditions, the following rules apply: A person includes a natural person, corporate or unincorporated body (whether or not having separate legal personality). A reference to a Party includes its personal representatives, successors or permitted assigns. A reference to a statute or statutory provision is a reference to such statute or provision as amended or re-enacted. A reference to a statute or statutory provision includes any subordinate legislation made under that statute or statutory provision, as amended or re-enacted. Any phrase introduced by the terms including, include, in particular or any similar expression shall be construed as illustrative and shall not limit the sense of the words preceding those terms. A reference to writing or written includes faxes and e-mails. 3. General Information These Conditions apply when MT: sells and delivers Hardware; sells and delivers Licences; sells and delivers Software; or provides repairs or any other services to the Customer. They will also apply to other business transactions unless MT agrees that alternative special conditions apply. These Conditions apply to the exclusion of any other conditions that may be proposed by a Customer or implied by law (insofar as such exclusion is lawful). Part II Specific Provisions for the Use of the Online Shop Customers purchasing Goods from the Site, must read all Parts of these Conditions, which apply to them in full. 4. Consumers The Goods and services provided by MT are designed only for sale to and use by businesses in the course of their business activities. MT does not knowingly sell to any person dealing as a consumer or supply anything for personal use. 5. Customer’s Status By placing an order on the Site, the Customer warrants that he or she is: legally capable of entering into binding contracts and, where the Customer is an individual, that he or she is at least 18 years old; and is dealing in a business capacity and purchasing Goods and/or services for the purpose of his business and not for personal use. Part III General Conditions for the Provision of Goods and Services 6. Formation of Contract Quotations provided by MT to the Customer are not binding on MT. The Customer’s order constitutes an offer to MT to buy the Goods or services. All orders are subject to acceptance by MT. The offer will be deemed accepted, and a Contract formed, when MT sends the Customer confirmation that the Goods have been dispatched (“Dispatch Confirmation”) or, in the absence of a Dispatch Confirmation, when the Goods are delivered. The Contract will only relate to those Goods whose dispatch is confirmed to the Customer by a Dispatch Confirmation or if no Dispatch Confirmation is sent, those Goods which are actually dispatched. MT is not obliged to supply any Goods which may have been part of the Customer’s order until the dispatch of such Goods has been confirmed in a separate Dispatch Confirmation. Subject to Condition 17 below, an order for services will be deemed to have been accepted, and a Contract formed, when MT sends the Customer confirmation that the services ordered will be provided (“Service Confirmation”) or, in the absence of a Service Confirmation, when the services begin to be provided. Oral representations will only be binding upon MT if they are expressly confirmed in writing by MT to the Customer. 7. Price Unless MT expressly specifies prices to the Customer, MT’s current list of prices applicable at the time of the acknowledgement of order will apply. Unless otherwise agreed in writing, all prices are exclusive of value added tax, postage, freight, insurance, forwarding fees, installation and commissioning, travelling expenses and subsistence, which will be added as appropriate. MT will charge overtime for work outside of their normal Business Hours at up to 150% of the hourly rate from time to time applicable during Business Hours. Subject to Condition 16 below, prices are liable to change at any time, but changes will not affect orders in respect of which MT has already sent the Customer a Dispatch Confirmation or a Service Confirmation as the case may be. The Site contains a large number of products and it is always possible that, despite MT’s efforts, some of the products listed may be incorrectly priced. MT will normally verify prices as part of dispatch procedures so that, where a product’s correct price is less than our stated price, MT will charge the lower amount when dispatching the product to you. If a product’s correct price is higher than the price stated on our site, MT will normally, at our discretion, either contact you for instructions before dispatching the product, or reject your order and notify you of such rejection. MT is under no obligation to provide any Goods or services to the Customer at an incorrect (lower) price, even after MT has sent a Dispatch Confirmation or a Service Confirmation in relation to those Goods or services if such incorrect price could reasonably have been expected to be recognised by the Customer as an error. 8. Delivery and Availability The Customer’s order for Goods will be fulfilled by the delivery date in the Dispatch Confirmation or, if no delivery date is specified, then within 30 days of the date the Customer made his order (where such an order leads to a Contract). The period for delivery or performance of the Contract will normally commence on MT’s acknowledgement of the order. However, if the Customer is required to do anything before MT can effect delivery, MT will, as soon as practicable, notify the Customer accordingly. The time within which MT must deliver any Goods will run from the date on which MT receives notice from the Customer that it has duly complied with such notification from MT. Unless otherwise agreed in writing, any periods mentioned in the acknowledgement of order for services and Software development are based on a preliminary estimate of the required workload and therefore are approximate only. Time of delivery and performance is not of the essence. If MT fails to meet any delivery or performance dates set out in the acknowledgement of order and is solely responsible for such failure, the Customer may terminate the Contract but only after MT has been given an opportunity to rectify the situation and subsequently fails to meet the revised set of delivery or performance dates provided by MT to the Customer in writing. Unless MT has been deliberately or grossly negligent, all further claims of the Customer on the basis of the delay in performance are excluded. If MT cannot deliver or perform its obligations under the Contract due to Force Majeure or a failure of the Customer to cooperate or any other act, default or omission of the Customer, then MT will be entitled to perform its obligations under the Contract once the issue has been resolved, provided the issue occurred while MT was still allowed to deliver or perform and MT shall have no liability whatsoever for any delay or its failure to perform its obligations. 9. Agreed Performance Unless specified otherwise in writing, the agreed performance in respect of any repairs provided by MT, at the Customer’s request will be to adjust the relevant unit(s) to MT’s applicable standard specifications for that unit. Where the relevant unit(s) cannot be repaired to MT’s applicable standard specification due to the Customer limiting the repairs required or the time and money to be invested MT may exceed the Customer’s request if MT considers, at its sole discretion, that such additional repairs are reasonable and will ensure the proper functionality of the unit in question. The agreed performance levels for MT’s maintenance and care services are as set out in Conditions 26 and 28 below; for all other services the agreed performance levels will be as set out in the acknowledgement of order. 10. Refunds Where the Customer returns Goods (at the Customer’s cost) because he or she claims that the Goods are defective, MT will examine the returned Goods and will notify the Customer of its findings within a reasonable period of time. If MT (in its sole discretion) deems that the Goods are defective, MT may at its option repair, replace or provide a refund in respect of such defective Goods. MT will process any repair, replacement or refund as soon as practicable and, in the case of any refund, within 30 days of the day MT confirmed to the Customer that the Customer was entitled to the same. Such refunds will be made in full, including a refund of any delivery charges for sending the item to the Customer. 11. Import Duty If the Customer orders Goods for delivery outside the UK, they may be subject to import duties and taxes which are levied when the delivery reaches the specified destination. The Customer will be responsible for payment of any such import duties and taxes. Please note that MT has no control over these charges and cannot predict their amount. Customers should contact their local customs office for further information before placing an order. Customers must comply with all applicable laws and regulations of the country for which the Goods are destined. The Customer will indemnify and keep indemnified MT in respect of all costs, proceedings, losses and liabilities resulting from any breach by the Customer of any such laws. 12. Retention of Title to Property The Goods will be at the Customer’s risk from the time of delivery. Property in and title to all Goods will remain with MT until MT has received payment for the full price of all the Goods (and/or all other goods and/or services supplied by MT to the Customer under any other contract whatsoever).. The Customer may sell or use Goods in which title is retained during the course of their normal business, but may not give such Goods by way of pledge or pledge these Goods as security. Until the property in and title to the Goods passes to the Customer: the Customer shall keep the Goods properly stored, protected and insured and separate from all or any other goods whether belonging to MT, the Customer or any third party; MT shall be entitled at any time forthwith to revoke the Customer’s power to deal with the Goods; and such power shall automatically cease if an Insolvency Event shall occur in respect of the Customer; and the Customer shall not make any modification to the Goods, the Software or their packaging or alter, remove or tamper with any marks, numbers or other means of identification used on or in relation to the Goods. Upon termination of the Customer’s power to deal with the Goods, the Customer shall place the Goods at the disposal of MT and MT are hereby irrevocably authorised without the need for consent of any third party but using only such force as may be necessary, to enter upon any premises of the Customer or any third party for the purpose of removing the Goods. If third parties claim title to Goods with retained title, the Customer will inform MT without delay, will notify the person making the claim of MT’s title and will support MT in enforcing its rights, including taking all the necessary steps required to preserve MT’s rights, including commencing litigation at the Customer’s own expense. If the Customer breaches the Contract, e. g. by delaying payment, the Customer will be obliged to return the Goods with retained title if requested by MT, in return for which MT will not terminate the Contract. 13. Payment Where services, maintenance or care are provided on an ongoing basis, MT will invoice the Customer for these at the beginning of the billing period or as soon as reasonably practicable thereafter. The Customer will pay MT’s invoices in full within 30 days from the date of the relevant invoice. Depending on the scope of an order, payments for such services, maintenance or care are due either upon placement of the order by the Customer or upon partial delivery of the same of between 40 to 50% of their respective order value. BACS or cheque are the only methods of payment accepted. Invoices for Seminars and Training Sessions will be issued at the beginning of the respective session and payment is due immediately and without deduction. 14. Delay of Payment Where a Customer fails to pay an invoice by the due date, MT will be entitled to charge the Customer interest on all monies outstanding from the due date until the actual date of payment (both before and after judgment) at a rate of 8% above the base rate of the Bank of England calculated on a daily basis. 15. Setting-Off and Refusal of Payment The Customer cannot exercise any right of set-off in respect of amounts owed to or by MT. 16. Change of Pricing by MT for Ongoing Maintenance or Care MT may increase its prices for maintenance and services by giving the Customer written notice 2 months prior to the end of the Minimum Term. The Customer has 4 weeks from the date of receipt of the written notice from MT to object to the change. Where the Customer so objects, the Customer will be entitled to give notice to MT to terminate the Contract as of the date of the proposed price increase. 17. Automatic Extension of Contract Where services, maintenance or care are performed on an ongoing basis the Contract will come into effect upon acceptance by MT of the first order from the Customer for Software maintenance. The Contract will initially run until the date specified at “Minimum Service Duration” as set out in the “MT Service Product List” or until the expiry date where an expiry date is stipulated in the Contract (“Minimum Term”). Subject to one of the Parties serving written notice of termination on the other at least three months prior to the expiry of the Minimum Term, the Contract will be extended automatically. In the case of Software Licences supplied without a time limit, the Contract will extend until December 31st of the current year. The subsequent extension periods will begin on January 1st and end on December 31st of the respective year. In the case of Software Licences supplied with limited validity (e.g. a licence for 1-year) the extension is based on the terms and conditions set out in the description of the respective licence (e.g. extension by one further year). Unless otherwise agreed in writing, any extension to a Contract will be on the basis of MT’s current price list as at the date of such extension. 18. Delivery Obligations and Shipping The conditions for EXW (ex works) (MT’s premises or such other place referred to in the relevant order) as set out in the Incoterms 2010 apply to delivery of any Goods. Claims for any transport damages and any replacement of damaged Goods, remain with the Customer who is responsible for adhering to the mode and period for the filing of any claims with carriers, shippers and insurers. 19. Scope of Warranty (Material Deficiencies and Deficiencies in Title) MT warrants that the Hardware is free from defects in workmanship and material as at the time of transfer of risk; and warrants that the Software does not contain any flaws which void or substantially reduce its value or suitability for the usual or contracted purpose. Where MT is not the author of the Software, MT does not warrant that such Software will run without interruptions or errors, nor that MT will be capable of resolving all Software errors, nor that the Customer will be capable of achieving all of the functions included in the Software in all of the combinations chosen by the Customer, nor that these will meet the Customer’s requirements. MT will only warrant the quality and/or durability of Goods if it has expressly agreed in writing with the Customer that it will do so. The warranty period is 1 year. Where MT is the author of the Software such Software is subject to MT’s standard warranty. 20. Obligation to Inspect and Serve Notice of Defects The Customer must inspect the Goods upon delivery or repair and must notify MT in writing of any failure by MT to meet the specification within 7 days of delivery or repair or (where the failure was not apparent on reasonable inspection) within a reasonable time being no more than 1 month after discovery of the failure. Where the Customer fails to provide such notice MT will have no liability under its warranty. 21. Liability Subject only to Condition 21 d), MT shall not be liable to the Customer in contract, tort (including without limitation negligence) and/or breach of statutory duty for any loss or damage which the Customer may suffer by reason of any act, omission, neglect or default (including negligence) in the performance of the Contract by MT, its servants or agents, in a sum which is greater than GBP 200,000 per incident or series of connected incidents. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect loss of any kind resulting from these Conditions, its performance or any breach of its terms. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect economic loss of any kind including (but without limitation) loss of business opportunity, reputation, goodwill resulting from these Conditions, its performance or any breach of its conditions. Notwithstanding any other provision herein, nothing in these Conditions shall operate so as to limit or exclude MT’s non-excludable liability in respect of death or personal injury caused by the negligence of MT to exclude the application of Section 12 of the Sale of Goods Act 1979 and to exclude liability for fraudulent misrepresentation. MT’s liability for loss of data is limited to the effort required to restore the data from proper backups provided by the Customer. 22. Third Party Rights If any third party claims or takes action against the Customer, because Goods delivered by MT, or their use in accordance with the instructions provided by MT, purportedly violate their commercial rights or proprietary rights, then the Customer will inform MT of the same. MT agrees that they will assist the Customer in defending such claims. Where the claim is made to the Customer within 12 months of the date of delivery, MT will indemnify the Customer against claims provided that the Customer: appoints MT to defend the claims or to settle the dispute, and promptly notifies MT of any such claim, keeps the Customer informed of all information received and provides such reasonable assistance to MT as it shall reasonably require, does not defend the action itself without coordinating such defence with MT, and does not at any time admit liability or otherwise settle or compromise or attempt to settle or compromise the said claim or action except upon the express instruction of MT, the alleged breach of rights is not based on alteration of the delivered item used by the Customer, and does not use the item delivered by MT in conjunction with other items and/or in a fashion that breaches any such rights, in a situation where the use of the item as delivered by MT would not have breached the rights of the person who has filed the claim. MT may at any time and at its own expense acquire on behalf of the Customer the right to continue to use the Goods, to replace the Goods or alter them in such a fashion that the rights of others are no longer breached. If this is not possible, the Customer shall return or destroy the Goods if required to do so by MT who will reimburse the purchasing price for the Goods less depreciation. If the Customer refuses to do so, MT will no longer defend the claim or provide the Customer with any further support. The Customer has no further rights in case of disputes over proprietary rights with third parties and MT shall have no liability therefore unless MT could be blamed for acting deliberately or with gross negligence. Part IV Special Conditions for Delivery of Software 23. Conditions of Use for Delivered Software In the case of delivery of Software to the Customer, MT hereby grants the Customer a simple, non exclusive and non-transferable, licence to use the Software (“Licence”) . The validity of the Licence is not time limited, unless otherwise specified to the contrary in the terms and conditions of the Licence. MT, grants the Customer the use of such Software in the form of the object code and the user documentation with the use being restricted to one electronic data processing system at any one time and only for the tasks for which it is intended. Unless permitted by law, the Customer will not decompile the Software or perform reverse engineering. The Customer may duplicate the Software but only to the extent that this is required for the permitted use, and in order to allow it to perform data backup. Upon delivery of any Software, including updates and upgrades, the Customer will immediately produce a backup copy. MT may terminate the Licence granted to the Customer pursuant to this Condition 23 with immediate effect if the Customer is in breach of the conditions for the use of the Software for a period of 30 days from the date of a written notice of such a breach from MT or any third party. On termination of this Contract howsoever arising, the Customer will return to MT within 30 days all Software together with any related materials owned and licensed by MT and shall delete all copies and partial copies of the Software however stored within 7 days of service of the notice. Proof of such deletion must be provided to MT without delay. On receipt of prior written consent from MT, the Customer may retain a copy of the Software for the purposes of archiving. 24. Delivery of Software MT will only install the Software if this has been expressly agreed in writing between the Customer and MT. MT is able to provide telephone consultancy and support concerning questions relating to the application of the respective Software products as well as the solution of problems that may occur as provided for in Condition 26 below. 25. Prerequisites for Running the Delivered Software The proper running of Software systems supplied will only be guaranteed if the Hardware and operating system components used correspond to the reference systems of the respective manufacturer(s), as well as having been approved and certified. Unless otherwise agreed in the Contract, the Customer shall ensure that the provisions in this Condition 25 are complied with. Part VMaintenance and Care Application Software 26. Scope of Performance of MT Services for Application Software For the Software products, unless otherwise expressly agreed in writing, MT will provide the following services, denoted by Service Level “SW-Service STANDARD” and Service Level “SW-Service E-STANDARD”: Right to use Software and documentation updates: MT grants the Customer a non-transferable, non-exclusive Licence to use the Software and any documentation or updates. The right of use is not limited in validity, unless otherwise specified in the terms and conditions of the Licence. Software and documentation updates: MT will supply the Customer with the current version of the Software as specified in the Contract. This will be done as specified by the manufacturer of the Software. The documentation will be supplied in the form determined by the manufacturer of the Software. The installation of Software updates will be performed by suitably qualified personnel of the Customer. Alternatively for an additional charge, MT may install the Software updates on behalf of the Customer. Where the Customer has adapted the Software, the Customer will be liable for the additional cost of performing the same adaptation to the new version of the Software or alternatively the Customer may perform the necessary adaptation himself. Hotline (Service Level “SW-Service STANDARD” only) MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. E-mail Hotline (Service Level “SW-Service E-STANDARD” only) MT is able to provide e-mail consultancy and support in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours Wherever possible, qualified consultancy will be provided by MT within the Response Time. MT Hotline: E-mail: hotline@MT.com Internet: http://www.MT.com/customersupport Software error messages Where Software problems occur which MT is unable, for whatever reason, to resolve, the Customer may send a written error message to MT. The purpose of such an error message is to identify the error in the Software and enable the manufacturer to resolve the error. MT shall liaise with the manufacturer(s) of the Software products to resolve any Software errors as promptly as possible. Restoration of any data, regardless of the cause of the data loss, is not the responsibility of MT. 27. Obligation of the Customer to Co-operate Pre-conditions for the provision of the services by MT to the Customer are that the Customer has legally acquired the Software and holds a corresponding Licence to use it. In addition, the Software must be in the same condition that it was in when it was delivered. The services exclusively relate to the current release and delivered version of the Software. If earlier Software versions are used, a one-time update service which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Services will not be performed for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). If the operating system for the Hardware is not included in the Contract, the Customer must update the operating system to the most recent version (e. g. by purchasing updates) if this is required in order to use the new versions of the application Software. Hardware and Operating Systems 28. Scope of Performance of MT Maintenance and Care Services for Hardware and Operating System For Hardware products and the operating system, unless otherwise agreed in writing, MT will provide the following services, denoted by Service Level “HW-Service SPECIAL”: The scope of performance is briefly set out in the “Special Description” for each product listed in the attached “MT Service Product List”. The exact scope of performance will be determined in accordance with the attached description of performance issued by the respective MT service operator (“Service Operator” including but not limited to Hewlett-Packard, Fujitsu Siemens and Silicon Graphics). The following shall also apply: Hotline MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Hardware products and operating system, as well as the resolution, (in so far as it is reasonably practicable to do so) of any problems which may occur. This service will be performed by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. Where queries arise outside of the Contact Hours, the Customer should address such queries directly to MT’s Service Operator Response time for Hardware failures MT will use reasonable endeavours to solve a query within the Response Time. The Response Time shall be deemed to have been initiated either as soon as the customer service personnel arrives on the relevant site, or as soon as remote diagnosis is started, where either is required to resolve the problem. The appropriate Response Time will be determined in accordance with the attached description of performance issued by the respective MT Service Operator. 29. Services Not Included Unless otherwise agreed in writing, the following services will not be provided by MT to the Customer: a) Repair/re-acquisition of devices that have been damaged as a result of: incidents of war of any type civil wars, nuclear energy, deliberate action of the Customer (not of his subcontractors) b) Repair/re-acquisition that is required because of repair work or alterations of devices carried out by the Customer or any third party without the prior written consent of MT. c) Work required due to interface problems between MT’s devices and those of other manufacturers and suppliers. d) Customer service which is required because a product that is not covered under this Contract has caused an error. e) Customer service that has become necessary because devices have been used under adverse conditions (e.g. including contaminations and deviations from recommended room temperature and relative humidity) or in conjunction with accessories or (device-specific) consumables (e.g. including foreign disks, disk stacks, cassettes, printer paper and print heads of any type) (“Device Specific Consumables”) which do not meet the manufacturer’s specifications. f) Replacement of Device-Specific Consumables. g) Data backup. h) Calibration work that is not related to repair. 30. Restoration of Data/Programs The restoration of data and programs upon repair or replacement of a defective hard disk is limited to starting the copying program (Restore) used to restore the last full data backup. 31. Obligation of the Customer to Cooperate a) Hardware service Pre-conditions for the provision of Hardware services by MT are that the Hardware has been acquired legally and has been installed properly at the Customer’s site. In addition the Hardware affected must correspond to the current revision and be in proper condition when including in the Contract. These pre-conditions shall be met immediately after the expiry of the warranty period specified in the Contract. If the Hardware is included in the Contract at a later date, these pre-conditions must first be confirmed by a takeover inspection of the Hardware by MT, which will be independently invoiced and paid for by the Customer, and if required the pre-conditions will be achieved by MT undertaking the required repair work. b) Operating System Service Pre-conditions for the provision of operating system services are that the Customer has legally acquired the Software and has been granted the necessary corresponding Licence to use it. In addition the Software must be in the same condition as when it was delivered to the Customer. The services exclusively relate to the current release and version of the Software. If earlier Software versions are used, a one-time “Update Service” which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Operating System services will not be provided for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). Part VI Generally Applicable Conditions 32. Prices and Fees for Special Services The following items are not included in the payment for services under Conditions 26 and 28 above and will be invoiced separately in accordance with MT’s current price list: Services performed outside Working Hours on the express request of the Customer. Services to correct errors caused negligently by the Customer or by any unauthorised third party as a result of improper treatment, unsuitable operating media, unauthorised manipulations, Software manipulations, non-adherence to operating conditions or otherwise. ices required due to faulty handling, excessive vibration, chemical influence, excessive dust burden or non-adherence to the properties set forth in the unit specifications. Unreasonable wait times and delays in the performance of services which are caused by the Customer. Services to remedy failures caused by Force Majeure. 33. Backup of Customer Data Prior to the commencement of any service work undertaken by MT, the Customer will backup all data in such a way that it may easily be restored by MT in the event that it is lost in the service process. 34. Change of Installation/Application Site Where maintenance and care services are provided on an ongoing basis by MT, the Customer will immediately inform MT in writing of any change to the installation or application address. If such a change results in an increase in MT’s expenses. MT reserves the right to either increase the prices charged to recover the additional expense incurred or alternatively MT may serve notice on the Customer to terminate the Contract where the new address is outside United Kingdom. 35. Miscellaneous Service Conditions and Obligations of the Customer to Co-operate MT may appoint authorised third parties to provide services. The Customer may only transfer title to services to third parties with the prior written consent of MT. Where defective components or devices are replaced by MT, these will become the property of MT. Extension of the products included in the maintenance agreement may be included in this Contract with the consent of the Customer. On request, MT will offer to the Customer a corresponding extension of the Contract, provided maintenance for the respective product is available. Where MT has to perform any services, the Customer shall accurately and without delay provide MT with any/all information that is required to perform such services. The Customer will provide MT with the name of a competent and appropriately qualified contact person and will provide the name of an appropriate substitute in order for the Hardware and Software to be maintained. Any contact(s) will have participated in the respective Seminars and/or Training Sessions held from time to time by MT or alternatively will have acquired comparable knowledge. These contacts will be available to MT’s technicians on site or will have access to the MT’s hotline as applicable. Consumables and Auxiliaries (which shall include documentation, application programs, data, telephone lines for transmission of voice and data) are not included in the scope of performance and shall be provided by the Customer in the vicinity of the system, such consumables and auxiliaries will be provided during Working Hours or, with prior consultation, outside of these hours. Additionally, the Customer will provide to MT computing time and consumables as required. 36. Specifically Ordered Service Days If service days are ordered for call-off within a specified period, such orders are binding. The services will become due for payment once they have been performed or by the end of the defined time period at the latest. Specifically ordered service days to be called off within a defined time period, can still be called off during a time of three months beyond the expiry of such defined time period. Thereafter they are lost. The claim to payment is thereby unaffected. For users that register on our website (if any), we also store the personal information they provide in their user profile. All users can see, edit, or delete their personal information at any time (except they cannot change their username). Website administrators can also see and edit that information.

Courses matching "Legal"

Show all 208

Phlebotomy Training

By Lead Academy

Are you a fresher and looking to start your career as a phlebotomist or are you currently employed in the healthcare profession and looking to expand your phlebotomy skills in order to build a rewarding career in this field? Or simply want to understand the blood collection procedure and gather skills to handle and transport specimens securely. This comprehensive phlebotomy course online is ideal for you! Course Highlights You will be given ample opportunity to practise on the manikins Face to Face Practical Training National Occupational Standard for Obtaining Venous Blood Sample Demonstrate appropriate infection control principles when performing training 3 Hours of Remote Theoretical Learning 7 Hours of Face-to-Face Training Sessions at Swindon Centre 7 Hours of Face-to-Face Training Sessions at Bristol Centre 1 Day of Face-to-Face Training Sessions at Birmingham Centre 8 Hours of Face-to-Face Training Sessions at London Centre Once confident at taking blood from the manikin you will have the opportunity to take blood from a fellow participant with consent. Accredited by the CPD Certification Designed by expert healthcare professionals. This extensive course covers the following credentials: Venepuncture process Vial labelling Blood-taking techniques Safety protocols, Needle safety techniques Processing of blood samples Prioritising patients System of needle measurement Maintaining the accuracy of specimen labels Controlling and preventing infection Techniques for preserving clinical proficiency Legal repercussions of bad behaviour Causes of infection and needed records Identify the veins used for Venepuncture (Phlebotomy) Solving issues might arise during the actual operation Classroom-Based Phlebotomy Training Course To ensure effective training, our classroom-based learning is divided into two parts: Remote theoretical learning (online) For the first part of our phlebotomy course online, we provide in-depth theoretical learning which you can complete from the comfort of your home. You can go on to the practical learning portion once the coursework and assessments have been successfully completed. Face-to-face practical learning (designated London-based office, with a similar structure at Swindon, Bristol and Birmingham offices) As part of the practical training, you will receive practical demonstrations and hands-on experience to justify your role. The practical learning part is divided into two learning slots with each weighing 4 hours of time: First 4 hours session: Through practical demonstration using a mannikins, you will be taught how to smoothly draw blood, reduce risks, and control the patient’s reaction. Last 4 hours of sessions: You will then have the chance to draw blood from fellow participants with consent while being closely supervised. Phlebotomy | Online Course | Lead Academy - Trailer Who is this Phlebotomy Training Course for? This phlebotomy course is primarily aimed at: Phlebotomists Health Visitors Physiotherapists Occupational Therapists Healthcare professionals Nurses, midwives, phramcists and doctors Freshers looking to begin their career as a phlebotomist Anyone looking to enhance their blood-sampling skills Whether you are a fresher looking to kickstart your career in the field of phlebotomy or a practicing healthcare looking to enhance your phlebotomy skills, this course will help you achieve your professional aspirations by all means. Entry Requirements There are no academic entry requirements for this online phlebotomy course, and it is open to students of all academic backgrounds. Entry Requirements There are no academic entry requirements for this blood taking course, and it is open to students of all academic backgrounds. However, you are required to have a laptop/desktop/tablet or smartphone and a good internet connection. Assessment Method In this phlebotomy course learners will be assessed through observation. That means during the practical training you will be observed by the supervisor/trainer. Upon successful demonstration of blood sampling and blood draw, you will be awarded a CPD-accredited certificate that is accepted by thousands of professional bodies and government regulators here in the UK and around the world. We also offer face-to-face practical training for Cannulation Training, Catheterisation Training, and Advanced / Competency Phlebotomy Training Course Curriculum Module 1: Introduction Module 2: Steps Before Withdrawing Blood (Venepuncture) Module 3: Basic Anatomy Lessons Module 4: Dos and Donts for Vein Selection Module 5: Preparation for Venepuncture Module 6: Managing Patient’s Expectations Module 7: Complications Issues during Venipuncture Module 8: Processing of Blood Samples Module 9: Conclusion Recognised Accreditation This phlebotomy course is accredited by Continuing Professional Development (CPD). CPD is globally recognised by employers, professional organisations and academic intuitions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. CPD-certified certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Many organisations look for employees with CPD requirements, which means, that by doing the phlebotomy course, you would be a potential candidate in your respective field.

Phlebotomy Training
Delivered in London + 4 more or Online + more
£195

Phlebotomy (Venepuncture) Training - In Person

4.9(21)

By AB Health Group

Course Introduction Our Venepuncture and Phlebotomy training equips delegates with the skills and knowledge needed to take blood safely. Please note: this course is for health care professionals and nurses only. About this event Applicable to Nurses, Health Care Assistants and Phlebotomists in primary care, the community, hospitals or nursing homes, this course is interactive and involves a demonstration session on performing blood tests. Our venepuncture training will give delegates the theoretical and practical awareness to undertake a competence assessment framework in the workplace that will deem them competent to take blood safely and appropriately. Each delegate will receive a competence-based framework to allow them to do this. Course Aims Identify and describe equipment used for routine venepuncture Be able to assess and select suitable sites used for venepuncture as well as locations to avoid Describe and utilize the required steps to perform routine venepuncture Describe actions that ensure safety during performance of a venepuncture Identify suitable vein selection and identify factors influencing this Understand relevant professional and legal issues Be able to identify potential complications Understand anatomy and physiology and correct vein selection Be familiar with equipment and exercise choice in using most appropriate equipment Practice safely in terms of infection control and waste management Become skilled and competent at phlebotomy To recognise any complications arising and be able to take the appropriate action Course Content Background and importance of training and competence Supervision and practice Scope and responsibilities Accountability Professional and legal issues Consent and capacity What is phlebotomy? Tools of the trade-equipment Needles and patient safety Blood collection systems and devices Syringes and when to use them Blood collection tubes Labelling Anatomy and physiology Vein Selection: - Identification of Veins - Arm Veins - Hand Veins Vein assessment Unacceptable sites for venous collection Venepuncture procedure Attempts Order of Fill Specimen collection procedures Specimen handling post-phlebotomy Personal protective equipment Needle stick injuries Legislation-EU Directives Disposal Needle phobias Dealing with anxiety/fainting etc. Practical session Potential Complications (including infection control) Practical Application - techniques and troubleshooting Case scenarios Troubleshooting Audit Who should attend / would be applicable? Nurses HCAs Those interested in careers as Phlebotomists AB Health Group awards CPD points / certificate of attendance for each course. If you would prefer an accredited certificate by our accrediting body Aim Qualifications we can organise this. The charge for the certificate including postage is £30.00. Annie Barr AB Health Group Organiser Description Annie Barr is a leading provider of high quality, accredited healthcare training. With a selection of engaging healthcare training that has been developed by experts to equip you and your workforce with the skills, knowledge and competence needed to provide compassionate and high quality care.

Phlebotomy (Venepuncture) Training - In Person
Delivered In-Person in Newcastle Upon Tyne + 2 more + more
£230

Medication Safety & Administration

4.8(50)

By EF Training & Consultancy Ltd

Medication Safety, Inhaler, Buccal training, 7Rs, CPD accreditation, Drug charts, medication, administration, Human factors, nebulizer, Midazolam, documentation, MRA, drug calculations, framework, syringe, consent

Medication Safety & Administration
Delivered In-Person in London + more
£80

Cannulation Training – CPD Approved

By Lead Academy

Do you want to boost your medical career by learning about the cannulation process? This comprehensive cannulation course is ideal for you!  You can learn about the whole venepuncture and cannulation procedure in this Venepuncture and Cannulation Training Course, as well as the safest methods for handling, flushing, and removing a cannula. This course will provide you with the necessary training to flourish in your profession, whether you are a novice or an experienced individual wishing to enhance your career in the healthcare industry.  Course Highlights Designed by healthcare professionals Accredited by the CPD Certification Recognised and Valuable Certification Self-Paced Online Theoretical Learning High-Quality Study Materials Interactive practical training Practical Day Class Schedule – 1 Day Face-to-Face Training  Venue Location London: Bank Studio, 23 Park Royal Road, NW10 7JH Date: 2nd August, 2024 Date: 25th August, 2024 Date: 29th September, 2024 Date: 29th October, 2024 Date: 29th November, 2024 Time: 10:00 am – 05:00 pm Venue Location Birmingham:  44 Blucher Street, Birmingham, B1 1QJ Date: 21st August, 2024 Date: 24th October, 2024 Date: 12th December, 2024 Time: 10:00 am – 05:00 pm This extensive IV Cannulation Course covers the following credentials:  Selection of veins for cannulation Arm and hand physiology and anatomy Types of cannula Process of cannulation Safety measures Proper insertion of the cannula Classroom-Based Cannulation Course Practical learning We offer comprehensive theoretical study materials and practical sessions for our cannulation training. As part of the practical training, you will receive practical dry lab demonstrations and hands-on experience to justify your role.  Who is this Venepuncture and Cannulation Course for?  This Venepuncture and Cannulation course is primarily aimed at:  Health Visitors Healthcare professionals Nurses, midwives, pharmacists and doctors Freshers looking to begin their career in the healthcare sector Anyone looking to enhance their cannulation skills Aims and Learning Outcomes of this Venepuncture and Cannulation Training Course  Know how to select the appropriate veins for cannulation Understand the anatomy and physiology of hands and arms Recognise the various sizes of a cannula Identify the risks concerning cannulation Know how to insert the cannula properly Recognise the safety precautions that should be maintained Gain knowledge about the dressing procedure Know how to safely flush and remove a cannula Learn how to securely dispose of all the sharps Learning how to perform Phlebotomy Trainingand Catheterisation Training can help you to provide better care to your patients. By being able to insert a catheter quickly and effectively, you can administer necessary treatments more efficiently, which can improve patient outcomes and reduce discomfort. Entry Requirements There are no academic entry requirements for this cannulation course, and it is open to students of all educational backgrounds. You need to join the Phlebotomy Training before attending the Cannulation Training. Assessment Method In this Venepuncture and Cannulation training, learners will be assessed via observation. That means during the practical training, you will be observed by the supervisor/trainer. Upon successful demonstration of blood sampling and blood draw, you will be awarded a CPD-accredited certificate accepted by thousands of professional bodies and government regulators in the UK and worldwide. Whether you are a fresher looking to kickstart your career in healthcare or practising healthcare looking to enhance your cannulation skills, this course will help you achieve your professional aspirations by all means. Course Curriculum 1. Cannulation Training - Course Introduction 2. What are Venepuncture and Cannulation 3. Anatomy and Physiology of the Circulatory System 4. Legal Aspects of Venepuncture (Phlebotomy) and Cannulation 5. Practitioner Requirements 6. Professional Competence and Accountability 7. Documentation and Record Keeping 8. Vicarious Liability 9. Consent 10. Influencing Factors during Venepuncture 11. Infection Prevention and Management 12. Haemolysis 13. Selecting Correct Equipment 14. Procedure of Venepuncture and Cannulation 15. Order of Draw 16. Peripheral Cannula and Venepuncture 17. Procedure Prior to Cannulation 18. During Cannulation 19. Cannula Size and Cannulation Aftercare 20. Removal of Cannulation 21. Complications 22. Cannulation Training - Conclusion Recognised Accreditation This course is accredited by Continuing Professional Development (CPD). CPD UK is globally recognised by employers, professional organisations, and academic institutions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. CPD certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Many organisations look for employees with CPD requirements, which means, that by doing this course, you would be a potential candidate in your respective field. Certificate of Achievement On successful completion of the cannulation course, you will be eligible to obtain a CPD-accredited certificate of achievement as proof of your new skill. The certificate of achievement is an official credential that confirms that you successfully finished a course with Lead Academy. 

Cannulation Training – CPD Approved
Delivered In-Person in London + 1 more + more
£160

BCG/Mantoux and TB - In person

4.9(21)

By AB Health Group

BCG, TB, BCG Scar Training, Mantoux Training, Learn about BCG and practical training

BCG/Mantoux and TB - In person
Delivered In-Person in London + more
£230

Occupational Health Immunisation Update - In Person

4.9(21)

By AB Health Group

A course designed for occupational health nurses. Updating on latest immunisation advice. giving a complete understanding of vaccinations, agendas, schedules, vaccine ingredients, contraindications and side effects.

Occupational Health Immunisation Update - In Person
Delivered In-Person in London
£230

Clinical Skills for Health Care Assistants Course (3 Days: 1-day Webinar & 2-days In Person)

4.9(21)

By AB Health Group

Clinical skills, HCAs, Nurses, Chronic disease

Clinical Skills for Health Care Assistants Course (3 Days: 1-day Webinar & 2-days In Person)
Delivered In-Person in Newcastle Upon Tyne + 1 more
£430

PMVA (Refresher)

4.8(50)

By EF Training & Consultancy Ltd

This 2-day course includes interactive classroom training and self-guided learning. Enhance your skills in managing challenging behaviors and aggression. Perfect for healthcare professionals who have previously completed a 3-5 day PMVA training. Book now! Social Media Description: 🔔 PMVA Refresher Course Alert! 🔔 📅 Duration: 2 Days (1 Day Classroom, 1 Day Self-Guided) 🏢 Location: London 👥 Who Should Attend: Healthcare professionals who have completed a 3-5 day PMVA training. 🎯 Key Learning Objectives: Refresh de-escalation techniques and physical intervention skills. Update on current local and national guidelines. Enhance personal safety and relational security. 📜 Certificate: Emailed upon completion. 📌 Topics Covered: Legal Framework PANEL Principle Relational Security Human Rights Approach Post-Incident Procedures And much more! 🌟 Enroll Today! Enhance your skills in managing challenging behaviors and ensure safety in your healthcare setting. Contact us via email, phone, or visit our website to book your place. #PMVA #HealthcareTraining #ViolencePrevention #Deescalation #ProfessionalDevelopment

PMVA (Refresher)
Delivered In-Person in London
£100

Production Sharing Contracts (PSC) & Related Agreements

By EnergyEdge - Training for a Sustainable Energy Future

Gain a deep understanding of Production Sharing Contracts (PSC) and related agreements through our expert-led course. Enroll now and excel in your field with EnergyEdge.

Production Sharing Contracts (PSC) & Related Agreements
Delivered in Internationally or OnlineFlexible Dates
£2,699 to £2,799

Natural Gas & LNG Sales Agreements

By EnergyEdge - Training for a Sustainable Energy Future

Enhance your knowledge of natural gas and LNG sales agreements with EnergyEdge course. Enroll now to gain valuable industry knowledge and skills.

Natural Gas & LNG Sales Agreements
Delivered in Internationally or OnlineFlexible Dates
£2,699 to £2,799