<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p>This 5 half-day Virtual Instructor Led Training (VILT) course covers carbon capture and geological storage of carbon dioxide. Burning fossil fuels for energy is a major source of carbon dioxide emissions to the atmosphere. Most anthropogenic (man-made) carbon dioxide is emitted by coal-fired or gas-fired power plants, and significant quantities of carbon dioxide are emitted through the production and separation of carbon dioxide-rich natural gas and industries such as cement, iron and steel. Carbon Capture Utilization and Storage, or CCUS, involves the long-term storage of captured carbon dioxide emissions in subsurface geologic formations.</p>
<p>This VILT course covers all aspects of CCUS including transport, storage and monitoring, economics and community engagement. It explores in detail the challenges of the current technology of geological storage, monitoring and verification including examples from working projects around the world. Many of these technologies are commonly employed by the petroleum industry. Successful deployment of CCUS will also require economic incentives, appropriate regulation, clarity on liability issues and acceptance by the community. These aspects of CCUS, and the corresponding opportunities for appropriately skilled organisations and individuals also will be discussed.</p>
<p><strong>Course Content at a Glance</strong></p>
<ol>
<li>Context for CCS/CCUS as An Emissions-reduction Measure</li>
<li>Principles of Geological Storage</li>
<li>Finding Geological Storage Sites</li>
<li>Stationary Sources of Carbon Dioxide for Capture</li>
<li>Carbon Dioxide Capture Technologies</li>
<li>Compression and Transport of Carbon Dioxide</li>
<li>Economics of CCS/CCUS</li>
<li>Community, Safety, Legal &amp; Regulatory Issues</li>
<li>Risk Assessment</li>
</ol>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this VILT course, participants will be able to:</p>
<ul>
<li>Identify the need for Carbon Capture and Storage (CCS)</li>
<li>Outline the key steps in the Carbon Capture and Storage process</li>
<li>Distinguish between reservoir rocks and sealing rocks</li>
<li>Describe the importance of permeability and porosity to storing carbon dioxide</li>
<li>Contrast the geological structures and trapping mechanisms for storing carbon dioxide</li>
<li>Describe the changes in geologically stored carbon dioxide over time</li>
<li>Outline the monitoring techniques employed to ensure the carbon dioxide is safely stored</li>
<li>Appreciate the industrial applications of carbon dioxide capture</li>
<li>Recognize the scale of industry required for transporting and storing carbon dioxide</li>
<li>Describe economic considerations for CCS/CCUS</li>
<li>Outline the economic and environmental opportunities and challenges with using carbon dioxide injection in a range of applications</li>
<li>Explain the challenges of regulatory frameworks and public acceptance in a CCS/CCUS project</li>
<li>Identify potential risks of a CCS/CCUS project</li>
<li>Outline the risk assessment and management process</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This VILT course is ideally suited for a technical audience - geoscientists, petroleum and chemical engineers - as well as for economists, regulators, legal staff and managers wishing to learn more about the details of both the technical, regulatory and socio-economic aspects of carbon capture and storage.</p>
<p>Participants should have:</p>
<ul>
<li>Experience with oil and gas, coal or other energy projects</li>
<li>Basic understanding of the energy industry</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your first expert course leader spent 18 years in the Petroleum Industry before joining academia, in both technical and managerial roles with Shell, Arco and Vico. He has received numerous awards, including Distinguished Service, Honorary member and Special Commendation awards from the American Association of Petroleum Geologist (AAPG) and was AAPG's International Vice-President and recently chairman of AAPG's House of Delegates (the Associations Parliamentary body).</p>
<p>He is an SPE Distinguished Lecturer (DL) and has served as DL for several other professional organisations, including, AAPG, IPA and PESA. He is currently a Professor of Petroleum Geology and Engineering at the Australian School of Petroleum, University of Adelaide. He holds the South Australia State Chair in Carbon Capture &amp; Storage (CCS) and is also presently Distinguished Scientist of the Cooperative Research Centre for Greenhouse Gas Technologies (CO2CRC), having served earlier as the Storage Program Manager and Chief Scientist.</p>
<p>Your second expert course leader has a wide and deep knowledge of major capture technologies: solvent, membrane and adsorption based technologies and has developed pathways for retrofitting CO<sub>2</sub> capture and storage (CCS) to fossil fuel-based power plants. He has been actively engaged in Post-combustion capture project management and demonstration projects in Victoria's Latrobe Valley on CO<sub>2</sub> capture and hydrogen production, and on CO<sub>2</sub> capture using membrane contactor technology.</p>
<p>He has led various feasibility studies for the Asian Development Bank on CO<sub>2</sub> Capture at Indian Oil Corporation's refineries, for JPOWER on hydrogen production from Victorian brown coal and for Kawasaki on incorporation of CCS in hydrogen production from fossil fuel. He has authored multiple peer reviewed journal articles, co-authored various confidential reports on CO<sub>2</sub> capture, utilization and hydrogen production and utility, and has presented his work at various conferences, symposiums and seminars. He has a PhD in Chemical Engineering from Monash University Australia and a Master of Technology in Process Engineering from Indian Institute of Technology Delhi India.</p>
<p> </p>
<p> </p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
</div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Carbon Capture, Utilization & Storage (CCUS)

Team of 10, pp

Normal Fee, pp

<div fr-original-style="" style="box-sizing: border-box;">
<br fr-original-style="" style="box-sizing: border-box;"></div>
<section fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<h2 fr-original-style="" style="box-sizing: border-box;">About this training course</h2>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This 3-days training will provide a comprehensive review of integrity of wells exposed to carbon dioxide (CO2) in the context of Carbon Capture Utilization for enhanced oil recovery and Storage (CCUS). CO2 geological storage is a proven technology to reduce greenhouse gas emissions from sources such as coal power plants, cement kilns and steel mills. Wells are widely considered the most critical containment element, especially older wells that are not used to inject CO2 or monitor the plume evolution in the storage reservoir. The main reason for this perceived risk is the high corrosion rate of carbon steel when exposed to wet CO2, and the tendency of Portland cement to react with the gas.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The training course advanced contents build on 15 years&#39; experience in carbon storage, both in the development and deployment of technologies. First-hand, in-depth knowledge of the subject will allow us to debunk myths and focus on the real challenges of wells encountering CO2.</p>
</div>
</section>
<section fr-original-style="" style="box-sizing: border-box;">
<div id="accordion" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Objectives 

</div>
<div id="collapseOne" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">After the completion of this training course, participants will be able to:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Explain the CCUS market drivers</li>
<li fr-original-style="" style="box-sizing: border-box;">Examine the behavior of CO2, on surface and in the reservoir</li>
<li fr-original-style="" style="box-sizing: border-box;">Diagnose cement defects and design repairs</li>
<li fr-original-style="" style="box-sizing: border-box;">Understand the limits of Portland cement</li>
<li fr-original-style="" style="box-sizing: border-box;">Assess the benefits of different technologies and materials</li>
<li fr-original-style="" style="box-sizing: border-box;">Realize why geology is a dominant factor in cement performance</li>
<li fr-original-style="" style="box-sizing: border-box;">Critically choose the most appropriate monitoring techniques</li>
<li fr-original-style="" style="box-sizing: border-box;">Classify aging processes of cement, steel, and rock when exposed to CO2</li>
<li fr-original-style="" style="box-sizing: border-box;">Assess the risk of existing wells if they encounter the CO2 plume</li>
<li fr-original-style="" style="box-sizing: border-box;">Examine recent advances in real-time approaches to the production monitoring and lift management</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Target Audience 

</div>
<div id="collapseTwo" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This training course is suitable and will greatly benefit:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">All surface technical personnel such as process engineers &amp; technologists</li>
<li fr-original-style="" style="box-sizing: border-box;">Facility engineers, production engineers &amp; technologists</li>
<li fr-original-style="" style="box-sizing: border-box;">Drilling engineers and Well engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Design engineers and Integrity engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">P&amp;A engineers and Cementing engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Geologists</li>
<li fr-original-style="" style="box-sizing: border-box;">Senior management executives will benefit from this training as covers an overview of the technical and commercial details of CO2 capture technologies and risks involved.</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Course Level 

</div>
<div id="collapsecl" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Intermediate</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Methods 

</div>
<div id="collapseThree" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization.</span></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Course Duration: 3 days in total (21 hours).</span></em></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Training Schedule</span></strong></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">0830 - Registration </span><span fr-original-style="" style="box-sizing: border-box;">0900 - Start of training </span><span fr-original-style="" style="box-sizing: border-box;">1030 - Morning Break </span><span fr-original-style="" style="box-sizing: border-box;">1045 - Training recommences </span><span fr-original-style="" style="box-sizing: border-box;">1230 - Lunch Break </span><span fr-original-style="" style="box-sizing: border-box;">1330 - Training recommences </span><span fr-original-style="" style="box-sizing: border-box;">1515 - Evening break </span><span fr-original-style="" style="box-sizing: border-box;">1530 - Training recommences </span><span fr-original-style="" style="box-sizing: border-box;">1700 - End of Training</span></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">The maximum number of participants allowed for this training course is 20.</span></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This course is also available through our Virtual Instructor Led Training (VILT) format.</p>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Trainer

</div>
<div id="collapseFive" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your expert course leader is an engineer with a passion for well integrity and possesses 28 years of international experience in field operations, technology development and management in the oil &amp; gas and carbon storage sectors. Since 2018 he is program chair of the Well Integrity Technical Section of the Society of Petroleum Engineers (SPE). He is also author or co-author of 31 technical papers, a book chapter on CO2 geological storage and 7 patent applications. He delivers training on well integrity, plug and abandonment, asset integrity, risk management and QHSE across the Eastern Hemisphere, and carries out active research on harnessing geological barriers, modeling leaks through cement, and quantifying methane emissions from oil &amp; gas wells. He has extensive expertise in: Well integrity, cementing, corrosion, upstream oil &amp; gas (drilling, completion), carbon capture and storage, mathematical modeling, risk management, reliability, HSSE (health/safety/security/environment), asset integrity, management systems, sustainable development, project management, portfolio management, training, and technology development and innovation. He has personally worked on CCS projects in Europe (France, Germany, Netherlands, Norway), Algeria, Japan and USA.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Partial list of companies that have benefited from the trainer&#39;s expertise: </strong></p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Vermilion Energy</li>
<li fr-original-style="" style="box-sizing: border-box;">Geostock</li>
<li fr-original-style="" style="box-sizing: border-box;">Aker BP</li>
<li fr-original-style="" style="box-sizing: border-box;">Shell</li>
<li fr-original-style="" style="box-sizing: border-box;">Statoil</li>
<li fr-original-style="" style="box-sizing: border-box;">ENI</li>
<li fr-original-style="" style="box-sizing: border-box;">TNO</li>
<li fr-original-style="" style="box-sizing: border-box;">Geogreen</li>
<li fr-original-style="" style="box-sizing: border-box;">Wintershall</li>
<li fr-original-style="" style="box-sizing: border-box;">Archer</li>
<li fr-original-style="" style="box-sizing: border-box;">INA and many more</li>
</ul>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Recent CCS consulting track record:</strong></p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Schlumberger</li>
<li fr-original-style="" style="box-sizing: border-box;">Total</li>
<li fr-original-style="" style="box-sizing: border-box;">Oxand</li>
<li fr-original-style="" style="box-sizing: border-box;">TNO</li>
<li fr-original-style="" style="box-sizing: border-box;">THREE60 Energy and others</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &#39;One to One&#39; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;">
Request for further information post training support and fees applicable</p>
</div>
</div>
</div><div fr-original-style="" style="box-sizing: border-box;"><div fr-original-style="" style="box-sizing: border-box;">

<br fr-original-style="" style="box-sizing: border-box;"></div>
<div id="collapseSeven" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
               </div>
</div>
</div>
</div>
</section>

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>On a day-to-day basis, one of the most common technologies utilised in well intervention is Coiled Tubing. This is prevalent in the oil industry and the technology is used during drilling, completion and production phases of Oil &amp; Gas wells worldwide.</p>
<p>This 5 full-day course will look at the following areas:</p>
<ol>
<li>Equipment for surface and pressure control</li>
<li>Assembly components for bottom-hole</li>
<li>Details of the different types of interventions performed with Coiled Tubing, and</li>
<li>How to deal with fatigue and corrosion.</li>
</ol>
<p>The aim of this course is to enable the participants to gain key knowledge that they will require to actively and efficiently participate in the planning, design, and / or execution of a Coiled Tubing intervention. With this, the participants will learn how to calculate the string operating limits and the volumes and rates during nitrogen interventions. The course will walk the participants through the emergency responses and contingencies to deal with in various scenarios. Time will be allocated for the participants to work on the practical exercises as well as real field cases and problems.</p>
<p>This course can also be offered through Virtual Instructor Led Training (VILT) format.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By the end of the course, the participants will be able to:</p>
<ul>
<li>Plan, design, manage and execute interventions for Coiled Tubing</li>
<li>Enhance operational performance during interventions for Coiled Tubing</li>
<li>Explain the recommended equipment for various Coiled Tubing field conditions and applications</li>
<li>Discuss the proper pressure control equipment for any particular well condition</li>
<li>Learn about the most commonly used downhole tools and explain their function</li>
<li>Understand how to calculate and define string limits for Coiled Tubing</li>
<li>Learn how to work safely with liquid nitrogen</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is aimed at</p>
<ul>
<li>Drilling and completion engineers</li>
<li>Production engineers</li>
<li>Surface/subsurface engineers</li>
<li>Operations engineers</li>
<li>Service company managers</li>
<li>Field engineers</li>
</ul>
<p>This course will also benefit professionals who would like to increase their knowledge in the planning, design and/or execution of Coiled Tubing and Liquid Nitrogen interventions.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Other than the daily quizzes to reinforce the materials presented in the session, the participants will work through exercises such as:</p>
<ol>
<li>Selecting suitable BHAs for various operations</li>
<li>Rigging up equipment in the correct order and preparing an outline testing programme</li>
<li>Carrying out suitable calculations to perform an N2 lift</li>
<li>Preparing an outline programme for a balanced cement plug</li>
<li>Identifying issues in various videos &amp; photos and suggesting mitigations</li>
<li>Basic N2 safety quiz</li>
<li>Final exercise will be preparing an outline programme for a Proppant Clean out, including a detailed Risk Register and Mitigation options</li>
</ol>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course instructor has over 40 years of experience in the Oil &amp; Gas industry. During that time, he has worked exclusively in well intervention and completions. After a number of years working for intervention service companies (completions, slickline &amp; workovers), he joined Shell as a well service supervisor. He was responsible for the day-to-day supervision of all well intervention work on Shell's Persian/Arabian Gulf platforms. This included completion running, coil tubing, e-line, slickline, hydraulic workovers, well testing and stimulation operations. An office-based role as a senior well engineer followed.</p>
<p>He was responsible for planning, programming and organising of all the well engineering and intervention work on a number of fields in the Middle East. He had a brief spell as a Site Representative for Santos in Australia before joining Petro-Canada as Completions Superintendent in Syria, then moved to Australia as Completions Operations Superintendent for Santos, before returning to Shell as Field Supervisor Completions and Well Interventions in Iraq where he carried out the first ever formal abandonment of a well in the Majnoon Field.</p>
<p>While working on rotation, he regularly taught Completion Practices, Well Intervention, Well Integrity and Reporting &amp; Planning courses all over the world. In 2014, he started to focus 100% on training and became the Technical Director for PetroEDGE. Since commencing delivering training courses in 2008, he has taught over 300 courses in 31 cities in 16 countries to in excess of 3,500 participants.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Coiled Tubing Operations - Equipment, Applications, Well Control, Safety & Emerging Technologies

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course has been designed to develop skills in understanding the geometry and petrophysical characteristics of carbonate reservoirs.</p>
<p>Depositional fabric, grain type and size and subsequent diagenetic modifications are the major controls on carbonate reservoir behaviour.</p>
<p>The complex inter-relationship of the depositional and burial history can be unravelled to allow prediction of reservoir facies and reconstruction of three-dimensional reservoir models.</p>
<p>This course will demonstrate the value of the reservoir model in volumetric assessment and development of carbonate reservoirs.</p>
<p><em>*Previous knowledge of carbonate sedimentology is not required.</em></p>
<p><strong>Course Content in Summary:</strong></p>
<ol>
<li><strong>Carbonate reservoirs:</strong> <em>Basic principles; depositional concepts; grain types; textures and fabrics; environmental reconstruction.</em></li>
<li><strong>The reservoir model - depositional and diagenetic characteristics:</strong> <em>Sabkha/tidal flat; lagoon; shelf; reef (rudist and coral/algal); barrier/shoal; slope and redeposited; aeolian and lacustrine; karst plays.</em></li>
<li><strong>Carbonate diagenesis:</strong> <em>Primary and secondary porosity; compaction; pressure solution; cementation; dolomitisation; porosity generation and destruction; fractures.</em></li>
<li><strong>Carbonate sequence stratigraphy</strong></li>
<li><strong>Log response in carbonate rocks:</strong> <em>Gamma; sonic; neutron; density; FMS.</em></li>
<li><strong>Reservoir assessment:</strong> <em>Fracture reservoirs; reservoir modelling; volumetric assessment in correlation and mapping; effects of capillary pressure; interface with engineering.</em></li>
</ol>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By attending this course, participants will be able to:</p>
<ul>
<li>Understand carbonate depositional systems and controls.</li>
<li>Recognise and model controls on reservoir quality and pore systems, including diagenesis and fracturing.</li>
<li>Understand and apply carbonate seismic stratigraphy and sequence stratigraphy.</li>
<li>Interpret log responses.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is intended for <strong>petroleum geologists, explorationists, petrophysicists, geophysicists and engineers involved with exploration of carbonate plays and development of carbonate reservoirs</strong>.</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a Director and Senior Consultant Geologist who has worked on various carbonate consultancy projects, conducted detailed sedimentological, sequence stratigraphic and diagenetic technical studies and delivered training programmes. He was formerly Managing Director of Robertson UK Limited and was responsible for the integration between different disciplines, recognition, and encouragement of technical innovation and research and development programmes across all oil and gas divisions in the company. He was also responsible for all aspects of the performance of the main Geological, Geophysical and Reservoir Engineering Services in the company.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Carbonate Reservoir Geology

<div fr-original-style="" style="box-sizing: border-box;">
</div>
<section fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<h2 fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">About this Training Course</strong></h2>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">In our pursuit to discover oil &amp; gas in deeper horizons, wells are often drilled in a HPHT environment. To be considered a HPHT well, the downhole conditions will have pressures in excess of 10,000 psi (69 MPa) and 300&Acirc;&deg; F (150&Acirc;&deg; C). To drill these usually expensive wells successfully, the planning and execution phase has to be of an exceptionally high standard. Therefore, both operator and drilling/service contractor staff must be seamlessly aligned and work as a coherent team to reach and then harness the well objectives. This is particularly important when speciality services such as Managed Pressure Drilling (MPD) are being applied with crews and/or supervisors who are not intricately familiar with complicated well control incidents. As we seek to prevent costly non-productive time, attention will also be paid to enabling technologies like expandable solid tubulars, mud coolers and specialty mud.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The 3 full-day course will explain the key characteristics and challenges of HPHT Planning and Well Control. This includes:</p>
<ol fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Differences between HPHT and standard (conventional) wells and what this entails for well design.</li>
<li fr-original-style="" style="box-sizing: border-box;">The challenges unique to HPHT and the impact of Pore Pressure Prediction (PPP).</li>
<li fr-original-style="" style="box-sizing: border-box;">Static and Dynamic Equivalent Mud Density and the factors that influence the ultimate Bottom Hole Pressure (BHP).</li>
<li fr-original-style="" style="box-sizing: border-box;">Control practices such as &#39;fingerprinting&#39; to identify what&#39;s happening downhole.</li>
<li fr-original-style="" style="box-sizing: border-box;">HPHT shut-in procedures and practices.</li>
<li fr-original-style="" style="box-sizing: border-box;">Specific HPHT equipment and drilling tool requirements and advantages of Managed Pressure Drilling (MPD).</li>
<li fr-original-style="" style="box-sizing: border-box;">Well control on/off bottom, bull-heading and dealing with kick-loss situations.</li>
<li fr-original-style="" style="box-sizing: border-box;">Mud management, tolerance on mud properties and challenges in cementing.</li>
<li fr-original-style="" style="box-sizing: border-box;">Case history on emergency control.</li>
<li fr-original-style="" style="box-sizing: border-box;">Drills, team effort, checklists, human factor and &#39;getting everybody on board&#39;.</li>
</ol>
</div>
</section>
<section fr-original-style="" style="box-sizing: border-box;">
<div id="accordion" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Objectives 

</div>
<div id="collapseOne" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">By the end of this course, participants will be able to:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Recognize the main differences in planning/design between HPHT and standard (conventional) wells as well as the challenges that will have to be faced.</li>
<li fr-original-style="" style="box-sizing: border-box;">Explain drilling and tripping operational challenges and practices as well as how to manage these effectively.</li>
<li fr-original-style="" style="box-sizing: border-box;">Identify wellbore breathing (a.k.a. ballooning) and how to safely deal with this within the narrow window for mud density selection.</li>
<li fr-original-style="" style="box-sizing: border-box;">Apply practices of consistent fingerprinting and how to develop procedures for this to benefit the rig team.</li>
<li fr-original-style="" style="box-sizing: border-box;">Measure and understand bottom hole pressure and the effect of influencing factors such as temperature, rotation and flow rate.</li>
<li fr-original-style="" style="box-sizing: border-box;">Understand the critical mud properties to alleviate barite sag, general mud density control techniques and specify the essentials in cementing.</li>
<li fr-original-style="" style="box-sizing: border-box;">Manage losses and low fracture gradients with well bore strengthening methods.</li>
<li fr-original-style="" style="box-sizing: border-box;">Execute sound HPHT shut-in procedures.</li>
<li fr-original-style="" style="box-sizing: border-box;">Understand how MPD can assist in the safe and efficient drilling and hole cleaning of HPHT wells.</li>
<li fr-original-style="" style="box-sizing: border-box;">Understand the use of MPD Influx Management Envelopes.</li>
<li fr-original-style="" style="box-sizing: border-box;">Identify critical Early Kick Detection Systems (EKDS) and HPHT well control equipment.</li>
<li fr-original-style="" style="box-sizing: border-box;">Execute safe secondary well control practices in a H2S environment, bull-heading, on and off bottom and handling of gas at surface, using MGS and hydrate mitigation measures.</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Target Audience 

</div>
<div id="collapseTwo" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The course is intended for:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Office-based staff engaged in HPHT well planning and day-to-day operations</li>
<li fr-original-style="" style="box-sizing: border-box;">Field-based rig staff working as front-line supervisors - from Assistant Drillers to Senior Toolpushers</li>
<li fr-original-style="" style="box-sizing: border-box;">Field-based rig staff working for service companies supporting the execution of HPHT wells (MPD, mud and mudlogging services etc.)</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Trainer

</div>
<div id="collapseFive" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your expert course leader has over 45 years of experience in the Oil &amp; Gas industry. During that time, he has worked exclusively in the well engineering domain. After being employed in 1974 by Shell, one of the major oil &amp; gas producing operators, he worked as an apprentice on drilling rigs in the Netherlands. After a year, he was sent for his first international assignment to the Sultanate of Oman where he climbed up the career ladder from Assistant Driller, to Driller, to wellsite Petroleum Engineer and eventually on-site Drilling Supervisor, actively engaged in the drilling of development and exploration wells in almost every corner of this vast desert area. At that time, drilling techniques were fairly basic and safety was just a buzz word, but such a situation propels learning and the fruits of &#39;doing-the-basics&#39; are still reaped today when standing in front of a class.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">After some seven years in the Middle East, a series of other international assignments followed in places like the United Kingdom, Indonesia, Turkey, Denmark, China, Malaysia, and Russia. Apart from on-site drilling supervisory jobs on various types of drilling rigs (such as helicopter rigs) and working environments (such as jungle and artic), he was also assigned to research, to projects and to the company&#39;s learning centre. In research, he was responsible for promoting directional drilling and surveying and advised on the first horizontal wells being drilled, in projects, he was responsible for a high pressure drilling campaign in Nigeria while in the learning centre, he looked after the development of new engineers joining the company after graduating from university. He was also involved in international well control certification and served as chairman for a period of three years. In the last years of his active career, he worked again in China as a staff development manager, a position he nurtured because he was able to pass on his knowledge to a vast number of new employees once again.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">After retiring in 2015, he has delivered well engineering related courses in Australia, Indonesia, Brunei, Malaysia, China, South Korea, Thailand, India, Dubai, Qatar, Kuwait, The Netherlands, and the United States. The training he provides includes well control to obtain certification in drilling and well intervention, extended reach drilling, high pressure-high temperature drilling, stuck pipe prevention and a number of other ad-hoc courses. He thoroughly enjoys training and is keen to continue taking classes as an instructor for some time to come.</p>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &#39;One to One&#39; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;">
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Accreditions And Affliations

</div>
<div id="collapseSeven" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
               </div>
</div>
</div>
</div>
</section>

HPHT Planning and Well Control

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This intensive 5 full-day has been designed as a separately bookable course comprising 3 days of Well Integrity (Basic) and 2 days of Advanced Well Integrity.</p>
<p>The intensive 3 full-day course will equip the participants with a thorough knowledge of well integrity management and risk assessment in producing assets. Based on the regulatory requirements and using real examples and exercises from around the world, this represents best practice integrity management within the oil and gas industry.</p>
<p>When to take action with a well is a critical decision, both from a safety and economic perspective. A consistent approach to decision-making provides certainty within the organisation, focusing effort, and spending wisely. The decision-making steps will be set out to ensure all critical aspects are captured consistently. Risk analysis approaches used by different organisations and examples of risk management and risk-ranking methods will be discussed.</p>
<p>The 2 full-day course will deepen the participants' knowledge of well integrity management, and skills for designing, operating, and maintaining well equipment. The ultimate goal is to optimise productivity at the lowest Unit Operating Cost (UOC) and to maintain mechanical integrity throughout well life cycle.</p>
<p>Well Integrity management is looked at in three distinct stages. The first stage is during the well design which includes material selection, engineering design, cement design, coating and inhibitors and cathodic protection. The second stage is monitoring the well during the life of the well, locating possible leaks and / or loss of metal. The last stage is to manage and control any well integrity issues using specialised products, services and techniques.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><strong>1. </strong><strong>Well Integrity Training:</strong></p>
<p>Upon completion of this course, the participants will be able to:</p>
<ul>
<li>Define the building blocks of a successful well integrity management system</li>
<li>Develop an approach to risk management, understand risk analysis and methods applied across the industry</li>
<li>How do we 'Make Wells Safer', learn about emerging technologies for well integrity problem diagnosis and new techniques available to 'repair' the issues</li>
<li>Execute the basic elements of well integrity management training for field operators</li>
<li>Evaluate well design elements that enhance or hinder well integrity status definition during the operating phase of the well life-cycle</li>
<li>Gain the demonstrable benefits of well integrity management from field experience</li>
<li>Review cases studies and discuss them to enhance knowledge and take on board lessons learned</li>
</ul>
<p><strong>2. Advanced Well Integrity:</strong></p>
<ul>
<li>Define well integrity well categorization based on compliance to the barrier policy outlined in the regulations and develop an approach to risk management</li>
<li>Discuss well-completion design and construction to create a 'integer' well with the lowest life cycle maintenance cost from a WIM perspective</li>
<li>Monitoring and surveillance of well integrity, focusing on barrier competence such as cementing and corrosion</li>
<li>Investigate and manage well integrity issues, causes &amp; potential solutions</li>
<li>Understand repairs needed to address 'Loss of Well Operating Envelope'</li>
<li>Gain an overview understanding of Well Suspension &amp; Well Abandonment</li>
<li>Discuss further case studies as well as conduct a post course test</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>Invaluable for production, operations, and integrity professionals involved in implementing &amp; managing well integrity and seeking to improve performance. It is also essential for those who need to develop and implement such systems, or who have a general need to know and understand more about well integrity management. The course will also provide a fresh approach for senior professionals and managers. Designed for professionals in the oil and gas industry who are involved in the design, construction and operation of wells from the following disciplines:</p>
<ul>
<li>Production Maintenance</li>
<li>Production Operations</li>
<li>Drilling Engineering</li>
<li>Safety engineering</li>
<li>Well Intervention</li>
<li>Well Integrity Engineering</li>
<li>Asset Management</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
<li>Advanced</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Gordon Duncan has over 40 years of experience in the Oil &amp; Gas industry. During that time, he has worked exclusively in well intervention and completions. After a number of years working for intervention service companies (completions, slickline &amp; workovers), he joined Shell as a well service supervisor. He was responsible for the day-to-day supervision of all well intervention work on Shell's Persian/Arabian Gulf platforms. This included completion running, coil tubing, e-line, slickline, hydraulic workovers, well testing and stimulation operations. An office-based role as a senior well engineer followed.</p>
<p>He was responsible for planning, programming and organising of all the well engineering and intervention work on a number of fields in the Middle East. He had a brief spell as a Site Representative for Santos in Australia before joining Petro-Canada as Completions Superintendent in Syria, then moved to Australia as Completions Operations Superintendent for Santos, before returning to Shell as Field Supervisor Completions and Well Interventions in Iraq where he carried out the first ever formal abandonment of a well in the Majnoon Field. While working on rotation, he regularly taught Completion Practices, Well Intervention, Well Integrity and Reporting &amp; Planning courses all over the world. In 2014, he started to focus 100% on training and became the Technical Director for PetroEDGE.</p>
<p>Since commencing delivering training courses in 2008, he has taught over 300 courses in 31 cities in 16 countries to in excess of 3,500 participants.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Well Integrity (Basic and Advanced)

Manchester

<div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">REFERENCE CODE</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">600/6511/4</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">COURSE LEVEL</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">NVQ Level 2</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">THIS COURSE IS AVAILABLE IN</strong></p><img src="https://oscaronsite.co.uk/wp-content/uploads/2022/08/flag_img.png" alt="image" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></div><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><h5 style="color: rgb(27, 26, 26); box-sizing: border-box;" fr-original-style=" color: rgb(27, 26, 26);">Course Overview</h5><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This qualification is aimed at those who are involved in plastering activities in the workplace. It is not expected that candidates working in this industry all do the same activities so the qualification has been developed to allow opportunities for those carrying out work in any one of the following broad categories: solid basic plastering, solid full plastering, basic fibrous plastering and full fibrous plastering. Those taking the qualification must also prove knowledge and competence in working at heights, calculating quantities and wastage and the use of powered and hand tools and equipment. All work completed must be done in accordance with building regulations and industry recognised safe working practices, including the disposal of waste.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The qualification is structured to ensure that there is a high degree of flexibility within the units available and will allow employees from companies of all sizes and specialisms equal opportunity to complete. To provide this opportunity in addition to the core skills above, candidates will also be able to select optional units recognising skills including, working with direct bond dry linings, laying sand and cement screeds, installing mechanically fixed plasterboard and carrying out repair work. The standards cover the most important aspects of the job. This qualification is at Level 2, although some units may be at different levels and should be taken by those who are fully trained to deal with routine assignments. Candidates should require minimum supervision in undertaking the job</p></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div><div style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><br fr-original-style="" style="box-sizing: border-box;"></div>

2 Educators providing Courses in Sheffield

hp enhancements and training

Sheffield

natural cement distribution ltd

Barnsley

Courses matching "CEM"

Carbon Capture, Utilization & Storage (CCUS)

By EnergyEdge - Training for a Sustainable Energy Future

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring

By EnergyEdge - Training for a Sustainable Energy Future

Coiled Tubing Operations - Equipment, Applications, Well Control, Safety & Emerging Technologies

By EnergyEdge - Training for a Sustainable Energy Future

Carbonate Reservoir Geology

By EnergyEdge - Training for a Sustainable Energy Future

HPHT Planning and Well Control

By EnergyEdge - Training for a Sustainable Energy Future

Well Integrity (Basic and Advanced)

By EnergyEdge - Training for a Sustainable Energy Future

NVQ DIPLOMA IN PLASTERING

By Oscar Onsite

Search By Location