Name: Securing Linux systems
Price: 3697 GBP
Availability: InStock

Redhill

<h3>WAN training course description</h3>
 A hands on Introduction to Wide Area Networks for
 engineers. This course covers all current major WAN
 technologies from a perspective of design, evaluating
 technologies available as well as hands on to
 consolidate the theory
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Describe the seven-layer model and realise how it applies to the real world.</li>
 <li>Evaluate and describe WAN technologies.</li>
 <li>Describe the architecture of WANs in the core.</li>
 <li>Use WANS to interconnect LANS.</li>
 </ul>
 <h5>
 WAN training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Technical staff wishing to find out more about how their WAN works.
 
							<li>Prerequisites:</li>
							
 Intro to data communications &amp; networking
 
							<li>Duration</li>
							
 5 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>WAN training course contents</h3>
 <ul>
 <li>Introduction</li>
 
 LANs, MANS and WANS, protocols, the OSI seven
 layer model, ITU-T, ETSI, DTE, DCE, and the
 overall picture.
 <li>WAN architectures</li>
 Service providers, core, access, DTE, DCE, CPE, 
 dialup, circuit switched, packet switched, how to
 choose a WAN, common bandwidths, site to site,
 remote access. 
 Topologies: Star, Full mesh, partial
 mesh.
 <li>History of WANs </li>
 Before IP was ubiquitous, The PSTN, Dial up
 networks, modems, ISDN, Stat mux, TDM, 64k,
 N*64, E1, X25, Frame Relay
 <li>The role of IP and routers</li>
 The growth of IP, the role of routers, routing tables,
 routing protocols. 
 Hands on: IP and routing.
 <li>Layer 1 Physical</li>
 Copper, Fibre, Wireless, Microwave, Phone lines,
 FTTC, FTTH, mobile networks. 
 <li>Service provider technologies </li>
 The transport plane, SDH, SONET, DWDM.
 <li>WAN access</li>
 Phone lines, leased lines, xDSL, WiMax, satellite, 
 the role of PPP.
 <li>Broadband</li>
 adband
 xDSL, ADSL, SDSL, local loops, DSLAM, DSL
 architecture.
 <li>ATM </li>
 Cell switching principles, ATM switching, Virtual
 paths, QOS, CBR, VBR, ABR, UBR, AAL1 to
 AAL5, MPOA, LANE, Voice over ATM.
 <li>The Internet </li>
 VPNs, IPSEC, QOS. 
 <li>What is MPLS?</li>
 Core MPLS, MPLS and the 7 layer model, MPLS
 protocol, MPLS standard, MPLS runs on routers,
 MPLS history, Why MPLS?
 <li>MPLS architecture</li>
 LSRs, PE and P router roles, FEC, swapping
 labels, MPLS packet format, Loops, TTL control.
 <li>Ethernet </li>
 What is Ethernet? LANs, MANs, WANs, Ethernet
 and switches in the LAN. Traditional LAN/WAN
 integration, routers. The Ethernet interface for the
					WAN. Standards: Transporting carrier Ethernet. 
 </ul>

Systems & Network Training

Network & Security

Network Engineer

Definitive WANs for engineers

General Admission

<h3>Advanced Python training course description</h3>
 This course caters to network engineers aiming to
enhance both their Python proficiency and network
automation skills. Delving deeper into key areas such
as netmiko, Nornir, and ncclient, we also focus on
automating network testing and validation. Participants
gain greater confidence working with Python functions,
classes, objects, and error handling. The course
additionally introduces more libraries like Scrapli, TTP,
pyATS, Genie, pybatfish, and Suzieq, which cover
parsing strategies, automation testing, validation,
network analysis, observability, and telemetry. The
curriculum also encompasses concurrency techniques.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Write Python modules and functions.</li>
<li>Evaluate techniques to parse unstructured data.</li>
<li>Use NETCONF filters.</li>
<li>Handle Python errors effectively (try, assertâ¦).</li>
<li>Use postman.</li>
<li>Automate testing and validation of the network.</li>
<li>Use scrapli, Genie, batfish and Suzieq. </li>
 </ul>
 <h5>
 Advanced Python training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Network engineers.
 
							<li>Prerequisites:</li>
							
 Python for network engineers
 
							<li>Duration</li>
							
 5 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Advanced Python training course contents</h3>
 <ul>
		<li>Review</li>
CLI, NETCONF, RESTCONF, structured versus
unstructured data, gNMI and when to use which.
PEP 8. Naming conventions. Packages, modules,
Classes and methods. The scrapli library. Netmiko
versus scrapli. Hands on: scrapli, Dictionaries
versus Regular Expressions.

		 <li>Modules and Functions</li>
Writing your own modules, containers versus
packages, virtual environments. Best practices,
calling functions, writing your own functions.
Parameters, arguments. Named arguments,
dictionaries as arguments. Builtins. Docstrings.
Main. __name__, __main__ . Program arguments.
 Hands on: Getting interfaces, showing interface
status using Netmiko and functions. Using
dictionaries as arguments. Writing your own
modules.

		 <li>Parsing strategies</li>
Turning unstructured data into structured data.
textfsm, PyATS Genie parser, NAPALM getters,
Template Text Parser. Hands on: Genie parser,
TTP. Accessing structured data with lists and
dictionaries.

				<li>Classes, objects and Python</li>
Python classes in Genie, PyEZ and others .
 Hands on: studying network automation classes,
objects, methods and attributes.

			<li>Configuration management - more nornir, ncclient,
requests</li>
Nornir tasks. Nornir results, Nornir functions,
Nornir plugins. Nornir processors. YANG, YANG
models, pyang. NETCONF hello. Capabilities.
Schemas. Filters. Subtrees. XPATH. Exploring
available YANG data models. NETCONF and
network wide transactions. Asserting NETCONF
capabilities. Configuration types. Locking
configurations, commits. NETCONF data stores.
Netconf-console. RESTCONF differences from
NETCONF. URI construction. Postman. More XML
and JSON. Git and configuration versions. Hands
on: Nornir and Jinja2. Exploring available models,
NETCONF filters. Using postman.

		<li>Python error handling and debugging</li>
Context handlers, try, assert, logging, pdb, pytest,
unit testing, chatgpt. Hands on: Writing code with
each of the error handling methods, investigating
what happens on an error. Use chatgpt to debug
your code.

	<li>Python Automation Testing</li>
Testing and validation. pyATS, Genie. Testbed
file. Genie parse, genie learn, genie diff. Genie
conf, Genie ops, Genie SDK, Genie harness.
Xpresso. Hands on: Using Genie for state
comparisons of the network.

	<li>Network analysis</li>
Batfish, pybatfish, configuration analysis,
analysing routing, analysing ACLs. Pandas.
Pandas dataframe. Filtering and selecting values
of interest. Hands on: Use Batfish to analyse
network snapshots, find network adjacencies, flow
path analysis.

	<li>Network observability</li>
Suzieq, using docker, using as a package. Sqpoller, suzieq-gui, suzieq-cli, sq-rest-server.
Namespaces and seeing devices, network state
and Asserts. Time based analysis, snapshots and
changes. Hands on: Suzieq: Gathering data from
the network, analysing data from the network.
Network state assertion.

	<li>Telemetry</li>
gRPC, gNMI. CAP, GET, SET. Subscriptions.
Model Driven telemetry. Hands on: Analysing
telemetry data with Python.

		<li>Concurrency</li>
asyncio, threads, processes. Nornir concurrency.
Scrapli and netmiko concurrency. Hands on:
Multiple SSH connections to devices at same
time. Scarpli asyncio.
		


 </ul>

Advanced Python for network engineers

<h3>Programming in HTML5 with CSS course description</h3>
 This course provides an introduction to HTML5, CSS3,
and JavaScript. It is an entry point into both the Web
application and Windows Store apps training paths.
The course focuses on using HTML5 / CSS3 /
JavaScript to implement programming logic, define and
use variables, perform looping and branching, develop
user interfaces, capture and validate user input, store
data, and create well-structured application.
 
				<h5>What will you learn</h5>
				<ul>
				 
	 
 <li>Create and style HTML5 pages.</li>
				 	 <li>Use JavaScript.</li>
 <li>Style HTML5 pages by using CSS3.</li>
 	<li>Use common HTML5 APLs in interactive Web applications.</li>
 <li>Create HTML5 Web pages that can adapt to different devices and form factors.</li>
																							<li>Enhance the user experience by adding animations to the HTML5 page.</li>
 </ul>
 <h5>
 Programming in HTML5 with CSS course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Website developers.
 
							<li>Prerequisites:</li>
							
 HTML5 development fundamentals.
							
 
							<li>Duration</li>
							
 5 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Programming in HTML5 with CSS course contents</h3>
 <ul>
				<li>Overview of HTML and CSS </li>
Overview of HTML, Overview of CSS, Creating a Web Application by Using Visual Studio 2012.
 Hands on Exploring the Contoso Conference Application.

<li>Creating and Styling HTML5 Pages </li>
Creating an HTML5 Page, Styling an HTML5 Page.
 Hands on Creating and Styling HTML5 Pages.

<li>Introduction to JavaScript </li>
Overview of JavaScript Syntax, Programming the HTML DOM with JavaScript, Introduction to jQuery.
 Hands on Displaying Data and Handling Events by Using JavaScript.

<li>Creating Forms to Collect and Validate User Input </li>
Overview of Forms and Input Types, Validating User Input by Using HTML5 Attributes, Validating User Input by Using JavaScript.
 Hands on Creating a Form and Validating User Input.

		<li>Communicating with a Remote Data Source </li>
Sending and Receiving Data by Using XMLHTTPRequest, Sending and Receiving Data by Using jQuery AJAX operations.
 Hands on Communicating with a Remote Data Source.

<li>Styling HTML5 by Using CSS3 </li>
Styling Text, Styling Block Elements, CSS3 Selectors, Enhancing Graphical Effects by Using CSS3.
 Hands on Styling Text and Block Elements using CSS3.

<li>Creating Objects and Methods by Using JavaScript </li>
Writing Well-Structured JavaScript, Creating Custom Objects, Extending Objects.
 Hands on Refining Code for Maintainability and Extensibility.

<li>Creating Interactive Pages using HTML5 APIs </li>
Interacting with Files, Incorporating Multimedia, Reacting to Browser Location and Context, Debugging and Profiling a Web Application.
 Hands on Creating Interactive Pages by Using HTML5 APIs.

<li>Adding Offline Support to Web Applications </li>
Reading and Writing Data Locally, Adding Offline Support by Using the Application Cache.
 Hands on Adding Offline Support to a Web Application.

<li>Implementing an Adaptive User Interface </li>
Supporting Multiple Form Factors, Creating an Adaptive User Interface.
 Hands on Implementing an Adaptive User Interface.

<li>Creating Advanced Graphics </li>
Creating Interactive Graphics by Using Scalable Vector Graphics, Programmatically Drawing Graphics by Using a Canvas.
 Hands on Creating Advanced Graphics.

<li>Animating the User Interface </li>
Applying CSS Transitions, Transforming Elements, Applying CSS Key-frame Animations.
 Hands on Animating User Interface Elements.

<li>Web Sockets for Real-Time Communications </li>
Introduction to Web Sockets, Sending and Receiving Data by Using Web Sockets.
 Hands on Implementing Real-Time Communications by Using Web Sockets.

<li>Creating a Web Worker Process </li>
Introduction to Web Workers, Performing Asynchronous Processing by Using a Web Worker.
 Hands on Creating a Web Worker Process.
			
 </ul>

Programming in HTML5 with CSS

<h3>UNIX Virtualization and High Availability course description</h3>
 This course covers administering UNIX enterprise-wide
with an emphasis on virtualization and high availability.
 
				<h5>What will you learn</h5>
				<ul>
				 
			 <li>Manage Virtual Machines.</li>
 <li>Manage containers.</li>
 <li>Manage HA clusters.</li>
 <li>Manage HA cluster storage.</li>
 </ul>
 <h5>
 UNIX Virtualization and High Availability course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Enterprise-level UNIX professional. 
 UNIX professionals
working with virtualization and/or High availability.
						 
 
							<li>Prerequisites:</li>
							
 Linux network administration 2 (LPIC-2)
							
 
							<li>Duration</li>
							
 5 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>UNIX Virtualization and High Availability course contents</h3>
 <ul>
				<li>VIRTUALIZATION </li>
<li>Virtualization concepts and theory </li>
Terminology, Pros and Cons of virtualization, variations of Virtual Machine monitors, migration of physical to VMs, migration of VMs between host systems, cloud computing.

<li>Xen </li>
Xen architecture, networking and storage, Xen configuration, Xen utilities, troubleshooting Xen installations, XAPI, XenStore, Xen Boot Parameters, the xm utility.

<li>KVM </li>
KVM architecture, networking and storage, KVM configuration, KVM utilities, troubleshooting KVM installations.

<li>Other virtualization solutions </li>
OpenVZ and LXC, other virtualization technologies, virtualization provisioning tools.

<li>Libvirt and Related Tools </li>
libvirt architecture, networking and storage, basic technical knowledge of libvirt and virsh, oVirt.

<li>Cloud Management Tools </li>
Basic feature knowledge of OpenStack and CloudStack, awareness of Eucalyptus and OpenNebula.

<li>Containers </li>
Containers versus VMs, Docker, Kubernetes.

<li>Load balanced clusters </li>
of LVS/IPVS, VRRP, configuration of keepalived, configuration of ldirectord, backend server network configuration. HAProxy, configuration of HAProxy.

<li>Failover clusters </li>
Pacemaker architecture and components (CIB, CRMd, PEngine, LRMd, DC, STONITHd), Pacemaker cluster configuration, Resource classes (OCF, LSB, Systemd, Upstart, Service, STONITH, Nagios), Resource rules and constraints (location, order, colocation), Advanced resource features (templates, groups, clone resources, multi-state resources), Pacemaker management using pcs, Pacemaker management using crmsh, configuration and management of corosync in conjunction with Pacemaker, other cluster engines (OpenAIS, Heartbeat, CMAN).


<li>HIGH AVAILABILITY CLUSTER STORAGE </li>
<li>DRBD/cLVM </li>
DRBD resources, states and replication modes, configuration of DRBD resources, networking, disks and devices, configuration of DRBD automatic recovery and error handling, management of DRBD using drbdadm. drbdsetup and drbdmeta, Integration of DRBD with Pacemaker, cLVM, integration of cLVM with Pacemaker.

<li>Clustered File Systems </li>
Principles of cluster file systems. Create, maintain and troubleshoot GFS2 file systems in a cluster, create, maintain and troubleshoot OCFS2 file systems in a cluster, Integration of GFS2 and OCFS2 with Pacemaker, the O2CB cluster stack, other commonly used clustered file systems.
 </ul>

UNIX Virtualization and High Availability

<h3>Linux virtualization and HA training course description</h3>
 The LPIC-3 certification is the culmination of LPI's multi
-level professional certification program. LPIC-3 is
designed for the enterprise-level Linux professional and
represents the highest level of professional, distribution
neutral Linux certification within the industry.
LPIC-3 304 covers administering Linux enterprise-wide
with an emphasis on virtualization and high availability.
At SNT we have enhanced the contents of the course
by covering containers.
 
				<h5>What will you learn</h5>
				<ul>
				 
			 <li>Manage Virtual Machines.</li>
 <li>Manage containers.</li>
 <li>Manage HA clusters.</li>
 <li>Manage HA cluster storage.</li>
 </ul>
 <h5>
 Linux virtualization and HA training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Linux professionals working with virtualization and/or High
availability.
						 
 
							<li>Prerequisites:</li>
							
 Linux network administration 2 (LPIC-2)
							
 
							<li>Duration</li>
							
 5 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Linux virtualization and HA training course contents</h3>
 <ul>
				<li>VIRTUALIZATION </li>
<li>Virtualization concepts and theory </li>
Terminology, Pros and Cons of virtualization, variations of Virtual Machine monitors, migration of physical to VMs, migration of VMs between host systems, cloud computing.

<li>Xen </li>
Xen architecture, networking and storage, Xen configuration, Xen utilities, troubleshooting Xen installations, XAPI, XenStore, Xen Boot Parameters, the xm utility.

<li>KVM </li>
KVM architecture, networking and storage, KVM configuration, KVM utilities, troubleshooting KVM installations.

<li>Other virtualization solutions </li>
OpenVZ and LXC, other virtualization technologies, virtualization provisioning tools.

<li>Libvirt and Related Tools </li>
libvirt architecture, networking and storage, basic technical knowledge of libvirt and virsh, oVirt.

<li>Cloud Management Tools </li>
Basic feature knowledge of OpenStack and CloudStack, awareness of Eucalyptus and OpenNebula.

<li>Containers </li>
Containers versus VMs, Docker, Kubernetes.

<li>Load balanced clusters </li>
of LVS/IPVS, VRRP, configuration of keepalived, configuration of ldirectord, backend server network configuration. HAProxy, configuration of HAProxy.

<li>Failover clusters </li>
Pacemaker architecture and components (CIB, CRMd, PEngine, LRMd, DC, STONITHd), Pacemaker cluster configuration, Resource classes (OCF, LSB, Systemd, Upstart, Service, STONITH, Nagios), Resource rules and constraints (location, order, colocation), Advanced resource features (templates, groups, clone resources, multi-state resources), Pacemaker management using pcs, Pacemaker management using crmsh, configuration and management of corosync in conjunction with Pacemaker, other cluster engines (OpenAIS, Heartbeat, CMAN).


<li>HIGH AVAILABILITY CLUSTER STORAGE </li>
<li>DRBD/cLVM </li>
DRBD resources, states and replication modes, configuration of DRBD resources, networking, disks and devices, configuration of DRBD automatic recovery and error handling, management of DRBD using drbdadm. drbdsetup and drbdmeta, Integration of DRBD with Pacemaker, cLVM, integration of cLVM with Pacemaker.

<li>Clustered File Systems </li>
Principles of cluster file systems. Create, maintain and troubleshoot GFS2 file systems in a cluster, create, maintain and troubleshoot OCFS2 file systems in a cluster, Integration of GFS2 and OCFS2 with Pacemaker, the O2CB cluster stack, other commonly used clustered file systems.
 </ul>

Linux virtualization and High Availability

<h3>Windows PowerShell training course description</h3>
 This course is intended for IT Professionals who are
already experienced in general Windows Server and
Windows Client administration, and who want to learn
more about using Windows PowerShell for
administration. No prior experience with any version of
Windows PowerShell, or any scripting language, is
assumed. This course is also suitable for IT
Professionals already experienced in server
administration, including Exchange Server, SharePoint
Server, SQL Server, System Center, and others. 
 
				<h5>What will you learn</h5>
				<ul>
				 
	 <li>Work with Windows PowerShell pipeline.</li>
 				 <li>Query system information by using WMI and CIM.</li>
																								<li>Work with variables, arrays, and hash tables.</li>
 <li>Write advanced scripts in Windows PowerShell.</li>
 				 <li>Administer remote computers.</li>
																								<li>Use advanced Windows PowerShell techniques.</li>
 </ul>
 
 <h5>Windows PowerShell training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 IT professionals.
 
							<li>Prerequisites:</li>
							
							Supporting Windows Server
 
 
							<li>Duration</li>
							
 5 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Windows PowerShell training course contents</h3>
 <ul>
				<li>Getting started with Windows PowerShell </li>
Overview and background of Windows PowerShell, Understanding command syntax, Finding commands.
 Hands on Configuring Windows PowerShell console &amp; ISE application.
 Hands on Finding and running basic commands, Using the About files.

<li>Cmdlets for administration </li>
Active Directory administration cmdlets, Network configuration cmdlets, Other server administration cmdlets.
 Hands on Windows Administration. Creating and managing Active Directory objects, Configuring network settings on Windows Server, Creating a web site.

<li>Working with the Windows PowerShell pipeline </li>
Understanding the pipeline, Selecting, sorting, and measuring objects, Filtering objects out of the pipeline, enumerating objects in the pipeline, Sending pipeline data as output.
 Hands on Using the pipeline. Selecting, sorting, and displaying data.
 Hands on Filtering objects. Hands on Enumerating objects. Hands on Sending output to a file. Exporting user information to a file.

<li>Understanding how the pipeline works </li>
Passing the pipeline data, Advanced considerations for pipeline data.
 Hands on Working with pipeline parameter binding. Predicting pipeline behaviour.

<li>Using PSProviders and PSDrives </li>
Using PSProviders, Using PSDrives.
 Hands on Using PSProviders and PSDrives Creating files and folders on a remote computer, Creating a registry key for your future scripts, Create a new Active Directory group.

<li>Querying system information by using WMI and CIM </li>
Understanding WMI and CIM, Querying data by using WMI and CIM, Making changes with WMI/CIM.
 Hands on Working with WMI and CIM. Querying information by using WMI, Querying information by using CIM, Invoking methods.

<li>Working with variables, arrays, and hash tables </li>
Manipulating variables, arrays and hash tables.
 Hands on Working with variables, Using arrays, Using hash tables.

<li>Basic scripting </li>
Introduction to scripting, Scripting constructs, Importing data from files.
 Hands on Basic scripting. Setting a script, Processing an array with a ForEach loop, Processing items by using If statements, Creating a random password, Creating users based on a CSV file.

<li>Advanced scripting </li>
Accepting user input, Overview of script documentation, Troubleshooting and error handling, Functions and modules.
 Hands on Accepting data from users. Querying disk information from remote computers, Updating the script to use alternate credentials, Documenting a script.
 Hands on Implementing functions and modules. Creating a logging function, Adding error handling to a script, Converting a function to a module.

<li>Administering Remote Computers </li>
Using basic Windows PowerShell remoting, Using advanced Windows PowerShell remoting techniques, Using PSSessions.
 Hands on Using basic remoting. Enabling remoting on the local computer, Performing one-to-one remoting, Performing one-to-many remoting.
 Hands on Using PSSessions. Using implicit remoting, Managing multiple computers.

<li>Using background jobs and scheduled jobs </li>
Using background jobs, Using scheduled jobs.
 Hands on Using background jobs and scheduled jobs. Starting and managing jobs, Creating a scheduled job.

<li>Using advanced Windows PowerShell techniques </li>
Creating profile scripts, Using advanced techniques.
 Hands on Practicing advanced techniques. Creating a profile script, Verifying the validity of an IP address, Reporting disk information, Configuring NTFS permissions, Creating user accounts with passwords from a CSV file.
 Hands on Practicing script development (optional)

 </ul>

Using Windows PowerShell

<h3>Network management technologies course description</h3>
 A comprehensive tour of the available network
management technologies available for todays
networks. The course starts with basic tools such as
syslog along with Python network automation. SNMP is
then covered with the *flow technologies and streaming
telemetry. Configuration management with ansible,
Python, NETCONF and RESTCONF is then studied.
The final part of the course looks at SDN. Hands on
sessions are used throughout to reinforce the theory
rather than teach specific manufacturer equipment.
Note that sections are available as individual courses.

 
				<h5>What will you learn</h5>
				<ul>
				 
 <li> Evaluate network management technologies.</li>
 					 <li> Evaluate network management technologies.</li>
<li> Recognise the weaknesses of SNMP versus
NETCONF and streaming telemetry.</li>
<li>Explain the role of NETCONF and RESTCONF.</li>
<li>Compare &amp; contrast *flow and streaming telemetry.</li>
<li> Explain the role of SDN in network management.</li>
<li>Automate network configuration with ansible and
Python.
</li>
 </ul>
 <h5>
 Network management technologies course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
							Those wishing to manage networks. (Previous Python experience is NOT needed)

 
							<li>Prerequisites:</li>
							
 Intro to data comms
 
							<li>Duration</li>
							
 5 days
 
							
 
 
						</ul>
					</div>
				</div>
			
				 <h3>Network management technologies course content</h3>
				<h4>Basic network management</h4>

				 <ul>
		<li>Network management</li>
What is network management? Benefits, issues.
FCAPS model. Fault management, Configuration
management, accounting, performance, security.
What to manage, what not to manage. Managing
network devices, managing servers.
				</ul>
<h4>Monitoring networks</h4> <ul>					 
<li>Traditional network tools</li>
Ping..., SSH, syslog, TFTP for configurations.
nmap. Wireshark. CLI. Web based management.
Splunk. Nessus, snort, Kali. 
 Hands on syslog, network inventories.

 </ul> <ul><li>Network automation using the CLI</li>
Programming and automating networks, netOps.
Python, Git. Python network modules, SSH,
paramiko, netmiko. EVE-NG.
 Hands onPython
network modules.

</ul> <ul><li>Structured versus unstructured data</li>
				
Problems with automation and unstructured data.
XML, JSON, YAML. The role of YANG. Hands on
Parsing data.
				
</ul> <ul><li>SNMP</li>
SNMP architecture, SNMP MIBs, SMI, the SNMP
protocol, polling security. Configuring SNMP.
SNMPv1, v2, v3, SNMP security. Which version
should you use? MIBs and MIB structure. mib-2,
extra parts of mib-2, Private enterprise MIBs.
Summary: What SNMP is good/bad at. Hands on
Configuring agents and a NMS. MIB browsing.
				
</ul> <ul><li>Server management</li>
Microsoft, Linux, application polling. WMI vs
SNMP. Hands on: Application polling.</ul>
				
<h4>Performance management</h4>
 <ul><li>*flow</li>
Polling, push vs pull, netflow, sflow, IPFIX, *flow.
Flows. Where to monitor traffic. Comparing *flow
with SNMP. Architecture: Generators and
collectors. When flows are exported. NetFlow
reporting products. SolarWinds. Hands on Netflow
configuration. Collectors.

</ul> <ul><li>Streaming telemetry</li>
Model driven telemetry, periodic/on change.
Structured data. Telemetry protocol stack. gRPC
and gNMI. Protobuf. gNMI operations. Telemetry
architecture. Telegraf, databases, Grafana. Hands on Telemetry example.
</ul>		
<h4>Configuration management</h4>
 <ul><li>Configuration management tools</li>
Chef, puppet, ansible, saltstack. Ansible
architecture, controlling machines, nodes,
agentless, SSH, modules. Inventories, playbooks,
modules, network modules, jinja2 templates.
 Hands on Network configuration with ansible.
	
</ul> <ul><li>NETCONF</li>
What is NETCONF? Protocol stack, Data stores,
traffic flows, validating configurations, rollback.
YANG data models and how YANG is used by
NETCONF. XML. Explorers and other tools.
 Hands on anx, Python and NETCONF.

</ul> <ul><li>RESTCONF</li>
The REST API, HTTP, What is RESTCONF?
Tools including Postman. Comparison with
NETCONF. Hands on Configuration with
RESTCONF.
	
</ul> <ul><li>Python network automation: configuration</li>
SSH issues. Using structured data. Jinja2.
ncclient, requests, NAPALM, Nornir. Automated
testing. Hands on Python network device
configuration with nornir.</ul>
	
<h4>Software Defined Networks and orchestration</h4>
 <ul><li>Classic SDN</li>
What is SDN? benefits. SDN architecture. SDN
applications, SDN switches, SDN controllers,
Network Operating Systems. Control plane, data
plane. Northbound interfaces. SDN components.
Southbound interfaces. OpenFlow. ONF,
OpenFlow ports, Flow tables.
	
</ul> <ul><li>Network virtualization</li>
Virtual networks, virtual switches, NfV. Service
chaining. NfV and SDN.
	
</ul> <ul><li>SDN implementations</li>
Classic SDN, Hybrid SDN, SDN via APIs, SDN
via overlays. Data centre SDN, VXLAN, Service
Provider SDN, SD WAN, Enterprise SDN, WiFi.
	
</ul> <ul><li>SDN and open source</li>
OpenDaylight, OpenVSwitch, Open Networking
Forum, Open Network Operating System. Hands onOpenStack.
	
</ul> <ul><li>SD-WAN</li>
What is SD-WAN? Architecture: Edge, gateway,
orchestrator, controller. Overlay and underlay.
Use of MPLS, 4G/5G. Benefits and features.
Secure Access Service Edge (SASE).

 
 
				
				
				 </ul>

Network management technologies

<h3>Perl training course description</h3>
 A hands on introduction to programming in Perl.
 
				<h5>What will you learn</h5>
				<ul>
				 
	 <li>Write Perl programs.</li>
																						<li>Use Perl modules.</li>
 <li>Debug Perl programs.</li>
 <li>Examine existing code and determine its function. </li>
 </ul>
 <h5>
 Perl training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone wishing to learn Perl.
 
							<li>Prerequisites:</li>
							
 None although experience in another high level language would be useful.
							
 
							<li>Duration</li>
							
 5 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Perl training course contents</h3>
 <ul>
				<li>Introduction to Perl </li>
What is Perl? When to use Perl, downloading Perl, installing Perl, documentation, perldoc, running Perl, the Perl environment. Perl under UNIX, Perl under Windows. "Hello world".

<li>Variables </li>
Scalars, data types, $_, strings and numbers, assignment, constants, strict, scope, STDIN.

<li>Operators </li>
Number operators, string operators, precedence and associativity, converting numbers and strings, shortcut operators.

<li>Flow control </li>
Blocks, if, else, elseif, unless, foreach, while, for do, until.

<li>Regular expressions </li>
What are regular expressions? Pattern matching, Perl as a filter, file editing.

<li>Strings </li>
Comparing strings, concatenating, substrings, chomp, chop, formatting, string manipulation.

<li>Subroutines </li>
Comparing strings, concatenating, substrings, chomp, chop, formatting, string manipulation.

<li>Arrays and hashes </li>
				Working with arrays, element access, push(), pop(), shift(), unshift(), &lt;STDIN&gt; as an array, associative arrays, hashes of arrays, hash references, arrays of hashes, hashes of hashes.

<li>Files </li>
Simple file handling, open, close, &lt;FILEHANDLE&gt;, &lt;&gt;, file tests, directory access, directory handles, database access, packing and packing binary data.

<li>I/O </li>
STDIN, STDOUT and STDERR, Command line arguments,@ARGV.

<li>Perl debugging </li>
The built in debugger, running the debugger, debugger commands, graphical debuggers. Script syntax errors, single stepping, breakpoints, watches.

<li>Packages and modules </li>
CPAN, Finding modules, installing modules, using modules, scope.

<li>Report formatting </li>
Formats, defining a format, invoking a format, field holders.

<li>Process management </li>
System interaction, system(), exec(), signals. Security issues.
			
 </ul>

Complete Perl programming

<h3>Python training course description</h3>
 This Python course focusses on teaching Python for
use in network automation and network DevOps. We
focus on getting delegates up and running with Python
and network automation as quickly as possible rather
than making them great programmers. In other words
we concentrate on enabling delegates to use network
automation libraries such as netmiko, NAPALM and
Nornir, and APIs such as NETCONF and RESTCONF
rather than enabling delegates to produce object
oriented programs. Hands on sessions use Cisco and
Juniper devices.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Run Python programs.</li>
																				<li>Read Python programs.</li>
																				<li>Write Python programs.</li>
																				<li>Debug Python programs.</li>
																				<li>Automate network tasks with Python programs.</li>
 <li>Configure network devices with Python.</li>
 <li>Collect data from network devices with Python.</li>
 </ul>
 <h5>
 Python training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Network engineers.
 
							<li>Prerequisites:</li>
							
 TCP/IP Foundation
 
							<li>Duration</li>
							
 5 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Python training course contents</h3>
 <ul>
				<li>What is Python? 	</li>
Programming languages, Why Python? Python in interactive mode, Python scripts, ipython, Python version 2 versus version 3. A simple Python script. Comments.
 Hands on Installing Python, Hello world.
<li>A network example	 </li>
On box vs off box Python. telnet, ssh, NETCONF, HTTP, APIs, manufacturers and API support, analysis of a simple telnetlib program.
 Hands on Using Python to retrieve the configuration from a network device. Using wireshark to analyse the actions.

<li>Python basics </li>
I/O, operators, variables and assignment, types, indentation, loops and conditionals.
 Hands on Modifying the telnet program, changing configurations on a network devices.

<li>Functions, classes and methods </li>
What are functions, calling functions, builtin functions, useful builtin functions, file handling, classes, objects, creating instances.
 Hands on Storing configurations in files, configuring devices from files, using an inventory file to work on multiple devices.

<li>Libraries and modules </li>
Modules, files and packages, import, from-import, Python standard library, other packages, pip install, executing other programs. Managing python libraries.
 Hands on Using pip, installing and using ipaddress, subprocess to access netsnmp. For the more advanced, using the sockets library.

<li>Paramiko and netmiko </li>
SSH, enabling SSH on devices, keys. Paramiko versus netmiko, example scripts. pexpect.
 Hands on Configuring VLANs from Python.

	<li>pySNMP </li>
Gathering facts using previous methods, SNMP review, pySNMP GET, pySNMP and SNMPv3. easySNMP library.
 Hands on Walking a MIB from Python.

<li>NETCONF </li>
What is NETCONF? Enabling NETCONF on devices, A first ncclient script, device handlers, get_config, edit_config, copy_config, delete_config, commit, validate, pyEZ, utils_config, utils.sw.
 Hands on Configuration using ncclient and PyEZ. This session is expanded for those interesting in JunOS automation.

<li>Manipulating configuration files </li>
Builtin functions, string handling. Unicode. Sequences, strings, lists, tuples. Dictionaries. TextFSM. Regular expressions. JSON, YAML, XML, YANG, Jinja2, templates.
 Hands on Jinja2 templating with Python to configure network devices.

<li>NAPALM </li>
Getters, configuration operations, supported devices, NAPALM transport, Config-replace, Config-merge, Compare config, Atomic changes, rollback. Example NAPLAM scripts.
 Hands on Using NAPALM to gather facts, Using NAPALM for configuration management

<li>REST and RESTCONF </li>
What is REST, HTTP methods, GET, POST, cURL, Postman, Python requests library. RESTCONF, a RESTCONF example.
 Hands on Modifying a configuration using RESTCONF.

<li>Scapy </li>
What is scapy, Scapy in interactive mode, Scapy as a module.
 Hands on Packet crafting from Python.

<li>Warning </li>
Errors and exceptions, Exception handling, try, except. Memory management. Garbage collection. Context management, With.
 Hands on Improving Python code.
		 
		 <li>Nornir </li>
What is Nornir? A network automation framework,
inventories, connection management and parallelization.
Nornir architecture and other libraires. 
 Hands on Setting
up nornir, nornir fact gathering, nornir tasks.

<li>Optional </li>
Writing your own functions, Writing your own classes. pyntc.
 Hands on Writing reusable code.

 </ul>

Python for network engineers

<h3>Securing Linux systems training course description</h3>
 This course teaches you everything you need to know
to build a safe Linux environment. The first section
handles cryptography and authentication with
certificates, openssl, mod_ssl, DNSSEC and filesystem
encryption. Then Host security and hardening is
covered with intrusion detection, and also user
management and authentication. Filesystem Access
control is then covered. Finally network security is
covered with network hardening, packet filtering and
VPNs. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Secure Linux accounts.</li>
					 <li>Secure Linux file systems.</li>
 <li>Secure Linux access through the network.</li>
 </ul>
 
 
 <h5>
 Securing Linux systems training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Linux technical staff needing to secure their systems.
 
							<li>Prerequisites:</li>
							
 Linux system administration (LPIC-1)
 
							<li>Duration</li>
							
 5 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Securing Linux systems training course contents</h3>
 <ul>
				<li>Cryptography</li>
<li>Certificates and Public Key Infrastructures</li>
				X.509 certificates, lifecycle, fields and certificate
extensions. Trust chains and PKI. openssl. Public and
private keys. Certification authority. Manage server and
client certificates. Revoke certificates and CAs.
<li>Encryption, signing and authentication</li>
SSL, TLS, protocol versions. Transport layer security
threats, e.g. MITM. Apache HTTPD with mod_ssl for
HTTPS service, including SNI and HSTS. HTTPD with
mod_ssl to authenticate users using certificates. HTTPD
with mod_ssl to provide OCSP stapling. Use OpenSSL
for SSL/TLS client and server tests.
<li>Encrypted File Systems</li>
Block device and file system encryption. dm-crypt with
LUKS to encrypt block devices. eCryptfs to encrypt file
systems, including home directories and, PAM
integration, plain dm-crypt and EncFS.
<li>DNS and cryptography</li>
DNSSEC and DANE. BIND as an authoritative name
server serving DNSSEC secured zones. BIND as an
recursive name server that performs DNSSEC validation,
KSK, ZSK, Key Tag, Key generation, key storage, key
management and key rollover, Maintenance and resigning of zones, Use DANE. TSIG.
				<li>Host Security</li>
<li>Host Hardening</li>
BIOS and boot loader (GRUB 2) security. Disable
useless software and services, sysctl for security related
kernel configuration, particularly ASLR, Exec-Shield and
IP / ICMP configuration, Exec-Shield and IP / ICMP
configuration, Limit resource usage. Work with chroot
environments, Security advantages of virtualization.
<li>Host Intrusion Detection</li>
The Linux Audit system, chkrootkit, rkhunter, including
updates, Linux Malware Detect, Automate host scans
using cron, AIDE, including rule management,
OpenSCAP.
<li>User Management and Authentication</li>
NSS and PAM, Enforce password policies. Lock
accounts automatically after failed login attempts,
SSSD, Configure NSS and PAM for use with SSSD,
SSSD authentication against Active Directory, IPA,
LDAP, Kerberos and local domains, Kerberos and local
domains, Kerberos tickets.
<li>FreeIPA Installation and Samba Integration</li>
FreeIPA, architecture and components. Install and
manage a FreeIPA server and domain, Active Directory
replication and Kerberos cross-realm trusts, sudo,
autofs, SSH and SELinux integration in FreeIPA.
				<li>Access Control</li>
<li>Discretionary Access Control</li>
File ownership and permissions, SUID, SGID. Access
control lists, extended attributes and attribute classes.
<li>Mandatory Access Control</li>
TE, RBAC, MAC, DAC. SELinux, AppArmor and Smack.
<li>etwork File Systems</li>
NFSv4 security issues and improvements, NFSv4
server and clients, NFSv4 authentication mechanisms
(LIPKEY, SPKM, Kerberos), NFSv4 pseudo file system,
NFSv4 ACLs. CIFS clients, CIFS Unix Extensions, CIFS
security modes (NTLM, Kerberos), mapping and
handling of CIFS ACLs and SIDs in a Linux system. 
				<li>Network Security</li>
<li>Network Hardening</li>
FreeRADIUS, nmap, scan methods. Wireshark, filters
and statistics. Rogue router advertisements and DHCP
messages.
<li>Network Intrusion Detection</li>
ntop, Cacti, bandwidth usage monitoring, Snort, rule
management, OpenVAS, NASL.
<li>Packet Filtering</li>
Firewall architectures, DMZ, netfilter, iptables and
ip6tables, standard modules, tests and targets. IPv4 and
IPv6 packet filtering. Connection tracking, NAT. IP sets
and netfilter rules, nftables and nft. ebtables. conntrackd
<li>Virtual Private Networks</li>
OpenVPN server and clients for both bridged and routed
VPN networks. IPsec server and clients for routed VPN
networks using IPsec-Tools / racoon. L2TP.

 </ul>

Securing Linux systems

Bournemouth

London Waterloo Academy

Dental Nurse

Dental Assistant

VIRTUAL DENTAL NURSING DIPLOMA

Registration Fee

Tuition Fee

Exam Fee

One Day Introduction Course

Burnley

This course is the next step on your Reiki journey if you would like to be able to use Reiki at a higher level and work with clients/familyThis level 2 Reiki course is for you if you want to give Reiki healing at a more intense level or give healing treatments to others. Here you are introduced to the Reiki symbols for the first time<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">Cho Ku Rei (power symbol)</li><li fr-original-style="" style="box-sizing: border-box;">Sei He Ki (emotional symbol)</li><li fr-original-style="" style="box-sizing: border-box;">Hon Sha Ze Sho Nen (distance healing symbol)</li></ul>What will I learn on this course:-<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">How to use the Reiki sacred symbols</li><li fr-original-style="" style="box-sizing: border-box;">What is Distance Healing and how to use the distance symbol so you can send Reiki healing to others.</li><li fr-original-style="" style="box-sizing: border-box;">Have increased level 2 Reiki energy</li><li fr-original-style="" style="box-sizing: border-box;">How to practice Self-Healing using the increased energy</li><li fr-original-style="" style="box-sizing: border-box;">Hand positions when healing others</li><li fr-original-style="" style="box-sizing: border-box;">The 21 day Cleansing Process explained</li><li fr-original-style="" style="box-sizing: border-box;">Professional Ethics</li><li fr-original-style="" style="box-sizing: border-box;">Question and answer session</li></ul>You will be initiated to the Reiki energy by a level 2 attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course. I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.The course can be booked online here and you will receive instructions on how to access the course.I look forward to meeting you and sharing my knowledge and experience of Reiki with you.What this course offers you<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">Individual Support - During and after your course</li><li fr-original-style="" style="box-sizing: border-box;">Practical Experience - Step by step training is given so that you can gain valuable experience using Reiki</li><li fr-original-style="" style="box-sizing: border-box;">Energy Perception &ndash; You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feel</li><li fr-original-style="" style="box-sizing: border-box;">Personal Growth - You will discover for yourself the increased level of Reiki healing and be able to use its methods of healing on others and have paying clients if you wish&nbsp;</li></ul>Why a Level 2 Course?&nbsp;Reiki at Level 2 is the level of training which is needed to practise Reiki healing professionally and have paying clients. Often reflexologists, aromatherapists and other complementary therapists add reiki healing to their range of healing skills that they offer their clients.&nbsp;However it is not just for those who have clients it is also a powerful self-development technique for your own personal healing experience and to share with family/friends and give them the benefit of well-being.A certificate at Reiki Level One is needed for you to enrol on this course and I am happy to accept students who have trained elsewhere with another Reiki Master.The Reiki Two course is taught live on line using Zoom.Testimonials:- What other students who have attended my courses are saying&nbsp;Level Two Course&ldquo;She explains everything so well and makes it easy to understand and connect to the reiki. This is my 2nd course I&rsquo;ve done with Margaret&rdquo; (Louise B)."Thank you, I thoroughly enjoyed the course." (Beverley S)This is a very well organized and informative course! (Georgie P)

This course is the next step on your Reiki journey if you would like to be able to use Reiki at a higher level and work with clients/family
This level 2 Reiki course is for you if you want to give Reiki healing at a more intense level or give healing treatments to others. Here you are introduced to the Reiki symbols for the first time
Cho Ku Rei (power symbol)
Sei He Ki (emotional symbol)
Hon Sha Ze Sho Nen (distance healing symbol)
What will I learn on this course:-
How to use the Reiki sacred symbols
What is Distance Healing and how to use the distance symbol so you can send Reiki healing to others.
Have increased level 2 Reiki energy
How to practice Self-Healing using the increased energy
Hand positions when healing others
The 21 day Cleansing Process explained
Professional Ethics
Question and answer session
You will be initiated to the Reiki energy by a level 2 attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course. 
I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.
The course can be booked online here and you will receive instructions on how to access the course.
I look forward to meeting you and sharing my knowledge and experience of Reiki with you.
What this course offers you
Individual Support - During and after your course
Practical Experience - Step by step training is given so that you can gain valuable experience using Reiki
Energy Perception – You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feel
Personal Growth - You will discover for yourself the increased level of Reiki healing and be able to use its methods of healing on others and have paying clients if you wish
Why a Level 2 Course? Reiki at Level 2 is the level of training which is needed to practise Reiki healing professionally and have paying clients. Often reflexologists, aromatherapists and other complementary therapists add reiki healing to their range of healing skills that they offer their clients. 
However it is not just for those who have clients it is also a powerful self-development technique for your own personal healing experience and to share with family/friends and give them the benefit of well-being.
A certificate at Reiki Level One is needed for you to enrol on this course and I am happy to accept students who have trained elsewhere with another Reiki Master.
The Reiki Two course is taught live on line using Zoom.
Testimonials:- What other students who have attended my courses are saying 
Level Two Course
“She explains everything so well and makes it easy to understand and connect to the reiki. This is my 2nd course I’ve done with Margaret” (Louise B).
"Thank you, I thoroughly enjoyed the course." (Beverley S)
This is a very well organized and informative course! (Georgie P)

Margaret Cook - Learn More About Reiki

Energy Healing

Reiki

Reiki Healer

I am a Reiki Teacher in Manchester and one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course. I teach all three levels of Reiki courses, level 1 reiki. level 2 reiki and reiki master level 3

Reiki Level 2 Practitioner Online Course

This driver CPC course - Customer Service &amp; Manual Handling is suitable for LGV &amp; PCV and will cover:Company &amp; Driver Image,&nbsp;Who Customers Are and What They Want,&nbsp;Communication Skills,&nbsp;Giving Good Customer Service,&nbsp;About Manual Handling,&nbsp;The Spine,&nbsp;Manual Handling Injuries and Their Costs,&nbsp;Regulations,&nbsp;Manual Handling Risk Assessment,&nbsp;Safe Handling Techniques,&nbsp;Manual Handling Equipment.All courses start at 07:45 hrs and finish at 15:45 hrsAll courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.Approval: This course is registered with JAUPT as approved for Driver CPC qualification.Course Approval Number: CRS18242/475.On completion of the course all attendees will receive certificate of attendance.Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.

This driver CPC course - Rules of the Road & Manual Handling is suitable for LGV & PCV and will cover:
Requirements, Speed Limits, SMART Motorways, Highway Code, Road Signs, Bridge Strikes, Mobile Phones, Sat-Navs, Traffic Accident Procedure, About Manual Handling, The Spine, Manual Handling Injuries and Their Costs, Regulations, Manual Handling Risk Assessment, Safe Handling Techniques, Manual Handling Equipment.
All courses start at 07:45 hrs and finish at 15:45 hrs
All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.
Approval: This course is registered with JAUPT as approved for Driver CPC qualification.
Course Approval Number: CRS18242/475.
On completion of the course all attendees will receive certificate of attendance.
Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.

PETM

HGV Driver

7.5 Ton Driver

Manual Handling

Driver CPC

Rules of the Road & Manual Handling - Online

Have you ever wondered what is Reiki and would like to know more, then this course is for you if you would like to learn more about ReikiThis Reiki Level One course is for you if you have heard a lot about Reiki and are interested in learning more about Reiki and is an introductory course on how to use Reiki healing techniques.This is where you begin and my online course will teach you all you need to know to get you started with using Reiki on yourself and it is very simple to learn and to use. It is a gentle hands-on healing technique, which uses healing energy to treat any physical or emotional concerns.Reiki is a helpful self-development technique for anyone wanting to learn more about reiki and how to enjoy the benefits of a healing treatment.The Reiki One course is taught live on line using Zoom.What will I learn on this course:-What is Reiki and its history?The Principles of ReikiAuras and chakrasPreparation for your initiation to the Reiki energy or attunementWhat does the Reiki energy feel like?21 day cleansing processHow to practise self-healing on yourselfReiki and its uses with other therapiesYour own Reiki LineageQuestion and answer session&nbsp;You will be initiated to the Reiki energy by an attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course.I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.The course can be booked online here and you will receive instructions on how to access the course.I look forward to meeting you and sharing my knowledge and experience of Reiki with you.What this course offers you:Individual Support &ndash; During and after your course, if you have any questionsPractical Experience &ndash; Step by step training is given so that you can gain valuable experience using Reiki on yourselfEnergy Perception &ndash; You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feelPersonal Growth &ndash; You will discover for yourself the gift of Reiki healing and have increased confidence to use it for self-healingTestimonials:- What other students who have attended my courses are saying &nbsp;Level One Course&ldquo;I enjoyed this course and Margaret is a great teacher and her calming voice explains everything clearly&rdquo;. (Anne-Marie M)&ldquo;This is a very informative course. It gave me everything I needed to know to start working with the Reiki energy. (Sally R.)&ldquo;This course is excellent!&rdquo; (Phil T)

Have you ever wondered what is Reiki and would like to know more, then this course is for you if you would like to learn more about Reiki
This Reiki Level One course is for you if you have heard a lot about Reiki and are interested in learning more about Reiki and is an introductory course on how to use Reiki healing techniques.
This is where you begin and my online course will teach you all you need to know to get you started with using Reiki on yourself and it is very simple to learn and to use. It is a gentle hands-on healing technique, which uses healing energy to treat any physical or emotional concerns.
Reiki is a helpful self-development technique for anyone wanting to learn more about reiki and how to enjoy the benefits of a healing treatment.
The Reiki One course is taught live on line using Zoom.
What will I learn on this course:-
What is Reiki and its history?
The Principles of Reiki
Auras and chakras
Preparation for your initiation to the Reiki energy or attunement
What does the Reiki energy feel like?
21 day cleansing process
How to practise self-healing on yourself
Reiki and its uses with other therapies
Your own Reiki Lineage
Question and answer session 
You will be initiated to the Reiki energy by an attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course.
I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.
The course can be booked online here and you will receive instructions on how to access the course.
I look forward to meeting you and sharing my knowledge and experience of Reiki with you.
What this course offers you:
Individual Support – During and after your course, if you have any questions
Practical Experience – Step by step training is given so that you can gain valuable experience using Reiki on yourself
Energy Perception – You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feel
Personal Growth – You will discover for yourself the gift of Reiki healing and have increased confidence to use it for self-healing
Testimonials:- What other students who have attended my courses are saying 
Level One Course
“I enjoyed this course and Margaret is a great teacher and her calming voice explains everything clearly”. (Anne-Marie M)
“This is a very informative course. It gave me everything I needed to know to start working with the Reiki energy. (Sally R.)
“This course is excellent!” (Phil T)

Reiki Level One Online Course - New to Reiki this is for you

Elevate your auditing expertise and lead the way in quality management with our ISO 9001:2015 Lead Auditor course, certified by CQI and IRCA. This comprehensive program is designed for professionals seeking to conduct first, second, and third-party audits of Quality Management Systems (QMS) against the ISO 9001:2015 standard.
Our course provides in-depth training on the principles and practices of auditing, equipping you with the knowledge and skills to effectively lead audit teams and assess the conformance and effectiveness of QMS in organizations. You will learn how to plan, conduct, report, and follow up on audits in compliance with ISO 19011 guidelines and ISO/IEC 17021 standards.
Key Features of the Course:
Certified Expertise: Achieve a globally recognized certification from CQI and IRCA, enhancing your professional credibility and career prospects.
Experienced Instructors: Learn from industry experts with extensive experience in quality management and auditing, who provide real-world insights and practical guidance.
Interactive Learning: Engage in hands-on exercises, case studies, and role-play scenarios that simulate real auditing situations, ensuring that you can apply what you learn directly to your work.
Comprehensive Curriculum: Cover all aspects of the ISO 9001:2015 standard, audit principles, and techniques, as well as risk-based thinking and the process approach.
Career Advancement: This course is ideal for those aspiring to become lead auditors, quality managers, or consultants, offering a pathway to new opportunities and enhanced professional status.
Upon successful completion of the course and examination, you will be awarded the prestigious CQI and IRCA certification, recognized globally as a mark of excellence in auditing. This certification will enable you to conduct audits for certification bodies and help organizations achieve compliance and continual improvement.
Enroll in our ISO 9001:2015 Lead Auditor course today and take the next step in your journey to becoming a leader in quality management.

QUALITY ACADEMY

Quality Management System

ISO 9001

Quality Management

Quality Assurance

Quality Auditor

Become a certified ISO 9001:2015 Lead Auditor with our CQI and IRCA accredited course. Gain the skills to lead quality management audits and enhance your career. Enroll now!

ISO 9001:2015 Lead Auditor (CQI and IRCA Certified)

Be it a career change, an exciting new hobby, perfecting existing skills or simply enhancing professional employment prospects&ndash; we help you unlock creativity through our industry aligned all-encompassing Graphic Design Course.<hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;">" Having done my level 1 and level 2 in graphic design, I felt that I still had gaps in my knowledge and I wasn&#39;t comfortable with what I knew. I signed up with Blue Sky Graphics and I am really glad I did. I am definitely better now than when I started and this is all thanks to my tutor and Blue Sky Graphics 🙂 " <hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><section data-id="a1c66d1" data-element_type="section" data-settings='{"background_background":"classic"}' style="color: rgb(74, 74, 74); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(74, 74, 74);"><div data-id="a6cdb97" data-element_type="column" fr-original-style="" style="box-sizing: border-box;"><div data-id="adfa4f2" data-element_type="widget" data-widget_type="text-editor.default" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">A Comprehensive Advanced Course</div><div data-id="8058df1" data-element_type="widget" data-widget_type="text-editor.default" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">The graphic design course is a structured academic and industry aligned advanced course suitable for complete beginners, intermediates or those wanting to improve their existing skill set. The graphic design course is comprehensive and through our teaching methodology is designed to train participants to become professional Graphic Designers. There is an emphasis on corporate illustration, composition, painting and logos as well as advertisement designs while focusing on vectors, lines, features, shapes, and spaces. All this will be integrated into how graphic elements are printed after they are processed in graphic design software for the purpose of visually illustrating emotions and messages. During the course you will be exposed to:&nbsp;advertisements, magazines, newspapers, corporate graphic designs particular to company cultures and brand identity, stationery, letterheads, business cards, logos, books, packaging and much more.</div><div data-id="68acc2a" data-element_type="widget" data-widget_type="image.default" fr-original-style="" style="box-sizing: border-box;"><img width="1024" height="692" alt="" data-srcset="https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-1024x692.webp 1024w, https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-300x203.webp 300w, https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-768x519.webp 768w, https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456.webp 1440w" data-src="https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-1024x692.webp" data-sizes="(max-width: 1024px) 100vw, 1024px" src="https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-1024x692.webp" sizes="(max-width: 1024px) 100vw, 1024px" srcset="https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-1024x692.webp 1024w, https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-300x203.webp 300w, https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456-768x519.webp 768w, https://blueskygraphics.co.uk/wp-content/uploads/2022/12/Student-work-123456.webp 1440w" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></div><div data-id="e3de655" data-element_type="widget" data-widget_type="text-editor.default" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">The graphic design course teaches you to understand and learn how to operate a labyrinthine yet amazing world of Adobe software. With this software we explore the uses of words, shapes, textures, forms, sizes and colours to communicate by combining ideas and images to make a new concept. Graphic design through common misconception is not just about layout and typography, but much more about ideas behind visual meaning. Graphic design can make a company more successful in the world if it makes communication smart, attractive and able to captivate its audience. Graphic design can effectively be used by businesses to make (or break) their brand identity, increase sales, promote web traffic or promote services and products through advertising on their websites to convey complex data to its readers in a clear way.Elements of graphic design include:&nbsp;Colour, Size, Texture, Line, Shape, Space and, Form. It is important that each element is understood correctly, and this is one of the key principles we teach on our graphic design course. In other terms, graphic design communicates certain ideas or messages through visuals. These visuals can be as simple as a business logo, or as complex as pages of web design. This course goes beyond just the practical side of graphic design and includes the theory and substance behind modern graphic design. Your teacher will guide you on:What salary you can expect at the start of your career? How to get new clients for your business for freelance designers ? How to find work for the new graphic designer starting out in the big world? How to quickly integrate into the graphic design field? How to combine working from home versus working at a studio ?</div><div data-id="9eeb2d6" data-element_type="widget" data-widget_type="text-editor.default" style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"> </div></div></section><section data-id="9dd6ca4" data-element_type="section" data-settings='{"background_background":"classic"}' style="color: rgb(74, 74, 74); box-sizing: border-box;" fr-original-style=" color: rgb(74, 74, 74);"><div data-id="c7b1c39" data-element_type="column" data-settings='{"background_background":"classic"}' fr-original-style="" style="box-sizing: border-box;"><div data-id="d1226d1" data-element_type="widget" data-widget_type="heading.default" fr-original-style="" style="box-sizing: border-box;"><h2 style="color: rgb(44, 132, 238); box-sizing: border-box;" fr-original-style=" color: rgb(44, 132, 238);">Begin one-to-one online learning with your very own private tutor</h2></div></div></section><img src="https://images.cademy.co.uk/0832ed64-c289-46fe-8a61-ae4fb9d9c688/14e85caa-6eee-4593-8ec3-48bdfc839153/original.webp" style="width: 698px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 698px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto;" fr-original-class="fr-draggable"><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"> <div data-id="833cc17" data-element_type="widget" data-widget_type="heading.default" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><div data-id="833cc17" data-element_type="widget" data-widget_type="heading.default" style="color: rgb(74, 74, 74); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(74, 74, 74);"><h2 style="color: rgb(33, 33, 33); box-sizing: border-box;" fr-original-style=" color: rgb(33, 33, 33);">Interested?</h2></div><div data-id="63ead7e" data-element_type="widget" data-widget_type="text-editor.default" style="color: rgb(12, 12, 12); box-sizing: border-box;" fr-original-style=" color: rgb(12, 12, 12);">Our course is 7 months long, consisting of 1 hour 30 minutes of online one-to-one sessions. When you enrol at Blue Sky Graphics expect at least 90 minutes of class sessions and 2 &ndash; 4 hours of homework per week.If we accommodate the course delivery into a shorter time frame, (for e.g. over 4 months instead of 7 months the Flexi 3 doubles from &pound;265.00 to &pound;450.00 over 4 months) the instalment is billed at the delivery rate.&nbsp; The cost of traditional schooling is typically more expensive than online courses, but in the end it all comes down to how good the tutors are. With our online courses you can gain skills that are a necessity for graphic design remotely.That&rsquo;s right! Learn the skills needed to use Photoshop, Illustrator, InDesign and portfolio!The online courses cost &pound;1799.00 (VAT inclusive) with no extra hidden costs and there are affordable instalment options too. Pay via debit or credit card or use a payment plan. A deposit of &pound;294.00 is required to secure your position.</div></div><div data-id="63ead7e" data-element_type="widget" data-widget_type="text-editor.default" style="color: rgb(12, 12, 12); box-sizing: border-box;" fr-original-style=" color: rgb(12, 12, 12);"> </div>

Graphic Design Courses Birmingham

Graphic Design

GRAPHIC DESIGN COURSE

<div id="course-pills-1">Duration2 Days12 CPD hoursThis course is intended forThe primary audience for this course is any IT, facilities or data centre professional who works in and around the data centre and who has the responsibility to achieve and improve the availability and manageability of the data centre.OverviewAfter completion of the course the participant will be able to:? Choose an optimum site for mission-critical data centre based on current and future needs? Describe all components that are important for high availability in a data centre and how to effectively setup the data centre? Name and apply the various industry standards? Describe the various technologies for UPS, fire suppression, cooling, monitoring systems, cabling standards, etc, and to select and apply them effectively to cost-efficiently enhance the high-availability of the data centre.? Review the electrical distribution system to avoid costly downtime? Enhance cooling capabilities and efficiency in the data centre by using existing and new techniques and technologies for the increased cooling requirements of the future? Design a highly reliable and scalable network architecture and learn how to ensure installers apply proper testing techniques? Create effective maintenance contracts with equipment suppliers ensuring the best return on investment? Setup effective data centre monitoring ensuring the right people get the right message? Ensure proper security measures, both procedural and technical, are established to safeguard your company's valuable information in the data centreThe course will address how to setup and improve key aspects such as power, cooling, security, cabling, safety, etc., to ensure a high available data centre. It will also address key operations and maintenance aspects.</div><div id="course-pills-2"><h4>The Data Centre, it?s Importance and Causes for Downtime</h4><h4>Data Centre Standards and Best Practices</h4><h4>Data Centre Location, Building and Construction</h4><ul><li>Selecting appropriate sites and buildings and how to avoid pitfalls Various components of an effective data centre and supporting facilities setup</li></ul><h4>Raised Floor/Suspended Ceiling</h4><ul><li>Uniform, concentrated and rolling load definitions Applicable standards Raised Floor guidelines Signal Reference Grid, grounding of racks Disability act and regulations Suspended ceiling usage and requirements</li></ul><h4>Light</h4><ul><li>Standards Light fixture types and placement Emergency lighting, Emergency Power Supply (EPS)</li></ul><h4>Power Infrastructure</h4><ul><li>Power infrastructure layout from generation to rack level ATS and STS systems Redundancy levels and techniques Three-phase and single-phase usage Power distribution options within the computer room Power cabling versus bus bar trunking Bonding versus grounding Common Mode Noise and isolation transformers Distribution boards, form factors and IP-protection grades Power quality guidelines Real power versus apparent power How to size and calculate load in the data centre Generators Static and dynamic UPS systems, selection criteria, how they operate and energy efficiency option Battery types, correct selection and testing Thermo-graphics</li></ul><h4>Electro Magnetic Fields</h4><ul><li>Electrical fields and magnetic fields definitions and units of measurements Sources of EMF Effects of EMF on human health and equipment (H)EMP Standards EMF shielding solutions</li></ul><h4>Equipment Racks</h4><ul><li>Rack standards, properties and selection criteria Security considerations Power rail/strip options</li></ul><h4>Cooling Infrastructure</h4><ul><li>Temperature and humidity recommendations Cooling measurement units and conversion rates Sensible and latent heat definitions Differences between comfort and precision cooling Overview of different air conditioner technologies Raised floor versus non-raised floor cooling Placement of air conditioner units and limitations to be observed Supplemental cooling options Cold aisle/hot aisle containment</li></ul><h4>Water Supply</h4><ul><li>Importance of water supply and application areas Backup water supply techniques</li></ul><h4>Designing a Scalable Network Infrastructure</h4><ul><li>The importance of a Structured Cabling System Planning considerations Copper and Fiber cable technology and standards ANSI/TIA-942 Cabling hierarchy and recommendations Testing and verification SAN storage cabling Network redundancy Building-to-building connectivity Network monitoring system requirements</li></ul><h4>Fire Suppression</h4><ul><li>Standards for fire suppression Detection systems Various total flooding fire suppression techniques and systems, their benefits and disadvantages Handheld extinguishers Signage and safety Regulatory requirements and best practices</li></ul><h4>Data Centre Monitoring</h4><ul><li>Data centre monitoring requirements EMS versus BMS Water leak detection systems Notification options and considerations</li></ul><h4>Operational Security and Safety Practices</h4><ul><li>Data centre security layers Physical, infrastructure and organisational security Safety measures and essential signage</li></ul><h4>Labelling</h4><ul><li>Choosing a labelling scheme Recommended labelling practices Network labelling</li></ul><h4>Documentation</h4><ul><li>How to setup proper documentation Document management policies and procedures</li></ul><h4>Cleaning</h4><ul><li>Cleaning practices for the data centre</li></ul><h4>MTBF/MTTR</h4><ul><li>Standards and definitions Calculation models The ?real? value</li></ul><h4>Maintenance Contracts/SLA/OLA</h4><h4>EXAM: Certified Data Centre Professional</h4></div><div id="course-pills-3"><h4>Additional course details:</h4> Nexus Humans Certified Data Centre Professional (CDCP) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Certified Data Centre Professional (CDCP) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.</div>

Nexus Human

IT Certifications

Construction Design & Management (CDM)

Certified Cloud Security Professional (CCSP)

AWS Certified Cloud Practitioner

Certified in Data Protection (CDP)

Certified Cyber Professional (CCP)

Certified Data Centre Professional (CDCP)

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training 

Construction Industry Scheme (CIS)

City & Guilds

Health & Safety

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Bromley

Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Kent

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

1924 Courses in Sheffield

Definitive WANs for engineers

By Systems & Network Training

Advanced Python for network engineers

By Systems & Network Training

Programming in HTML5 with CSS

By Systems & Network Training

UNIX Virtualization and High Availability

By Systems & Network Training

Linux virtualization and High Availability

By Systems & Network Training

Using Windows PowerShell

By Systems & Network Training

Network management technologies

By Systems & Network Training

Complete Perl programming

By Systems & Network Training

Python for network engineers

By Systems & Network Training

Securing Linux systems

By Systems & Network Training

Search By Location