Name: Best Practices Procurement for Carbon Offsets in the Energy Industry
Price: 2751 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p>This 5 half-day Virtual Instructor Led Training (VILT) course covers carbon capture and geological storage of carbon dioxide. Burning fossil fuels for energy is a major source of carbon dioxide emissions to the atmosphere. Most anthropogenic (man-made) carbon dioxide is emitted by coal-fired or gas-fired power plants, and significant quantities of carbon dioxide are emitted through the production and separation of carbon dioxide-rich natural gas and industries such as cement, iron and steel. Carbon Capture Utilization and Storage, or CCUS, involves the long-term storage of captured carbon dioxide emissions in subsurface geologic formations.</p>
<p>This VILT course covers all aspects of CCUS including transport, storage and monitoring, economics and community engagement. It explores in detail the challenges of the current technology of geological storage, monitoring and verification including examples from working projects around the world. Many of these technologies are commonly employed by the petroleum industry. Successful deployment of CCUS will also require economic incentives, appropriate regulation, clarity on liability issues and acceptance by the community. These aspects of CCUS, and the corresponding opportunities for appropriately skilled organisations and individuals also will be discussed.</p>
<p><strong>Course Content at a Glance</strong></p>
<ol>
<li>Context for CCS/CCUS as An Emissions-reduction Measure</li>
<li>Principles of Geological Storage</li>
<li>Finding Geological Storage Sites</li>
<li>Stationary Sources of Carbon Dioxide for Capture</li>
<li>Carbon Dioxide Capture Technologies</li>
<li>Compression and Transport of Carbon Dioxide</li>
<li>Economics of CCS/CCUS</li>
<li>Community, Safety, Legal &amp; Regulatory Issues</li>
<li>Risk Assessment</li>
</ol>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this VILT course, participants will be able to:</p>
<ul>
<li>Identify the need for Carbon Capture and Storage (CCS)</li>
<li>Outline the key steps in the Carbon Capture and Storage process</li>
<li>Distinguish between reservoir rocks and sealing rocks</li>
<li>Describe the importance of permeability and porosity to storing carbon dioxide</li>
<li>Contrast the geological structures and trapping mechanisms for storing carbon dioxide</li>
<li>Describe the changes in geologically stored carbon dioxide over time</li>
<li>Outline the monitoring techniques employed to ensure the carbon dioxide is safely stored</li>
<li>Appreciate the industrial applications of carbon dioxide capture</li>
<li>Recognize the scale of industry required for transporting and storing carbon dioxide</li>
<li>Describe economic considerations for CCS/CCUS</li>
<li>Outline the economic and environmental opportunities and challenges with using carbon dioxide injection in a range of applications</li>
<li>Explain the challenges of regulatory frameworks and public acceptance in a CCS/CCUS project</li>
<li>Identify potential risks of a CCS/CCUS project</li>
<li>Outline the risk assessment and management process</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This VILT course is ideally suited for a technical audience - geoscientists, petroleum and chemical engineers - as well as for economists, regulators, legal staff and managers wishing to learn more about the details of both the technical, regulatory and socio-economic aspects of carbon capture and storage.</p>
<p>Participants should have:</p>
<ul>
<li>Experience with oil and gas, coal or other energy projects</li>
<li>Basic understanding of the energy industry</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your first expert course leader spent 18 years in the Petroleum Industry before joining academia, in both technical and managerial roles with Shell, Arco and Vico. He has received numerous awards, including Distinguished Service, Honorary member and Special Commendation awards from the American Association of Petroleum Geologist (AAPG) and was AAPG's International Vice-President and recently chairman of AAPG's House of Delegates (the Associations Parliamentary body).</p>
<p>He is an SPE Distinguished Lecturer (DL) and has served as DL for several other professional organisations, including, AAPG, IPA and PESA. He is currently a Professor of Petroleum Geology and Engineering at the Australian School of Petroleum, University of Adelaide. He holds the South Australia State Chair in Carbon Capture &amp; Storage (CCS) and is also presently Distinguished Scientist of the Cooperative Research Centre for Greenhouse Gas Technologies (CO2CRC), having served earlier as the Storage Program Manager and Chief Scientist.</p>
<p>Your second expert course leader has a wide and deep knowledge of major capture technologies: solvent, membrane and adsorption based technologies and has developed pathways for retrofitting CO<sub>2</sub> capture and storage (CCS) to fossil fuel-based power plants. He has been actively engaged in Post-combustion capture project management and demonstration projects in Victoria's Latrobe Valley on CO<sub>2</sub> capture and hydrogen production, and on CO<sub>2</sub> capture using membrane contactor technology.</p>
<p>He has led various feasibility studies for the Asian Development Bank on CO<sub>2</sub> Capture at Indian Oil Corporation's refineries, for JPOWER on hydrogen production from Victorian brown coal and for Kawasaki on incorporation of CCS in hydrogen production from fossil fuel. He has authored multiple peer reviewed journal articles, co-authored various confidential reports on CO<sub>2</sub> capture, utilization and hydrogen production and utility, and has presented his work at various conferences, symposiums and seminars. He has a PhD in Chemical Engineering from Monash University Australia and a Master of Technology in Process Engineering from Indian Institute of Technology Delhi India.</p>
<p> </p>
<p> </p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
</div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Carbon Capture, Utilization & Storage (CCUS)

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p>This 2 half-day Virtual Instructor-Led Training (VILT) course will guide participants on the technoeconomic aspects of capture, utilization and geological storage of carbon dioxide. The VILT course will address the methods and techniques used in the technoeconomic assessment of Carbon Capture, Utilization &amp; Storage (CCUS) projects. It will explore in detail the factors that affect the cost-effectiveness of current and emerging technologies for CO<sub>2</sub> capture, transport and geological storage, including monitoring and verification. Given that the successful deployment of CCUS may require economic incentives, technical and economic drivers such as technological innovation, optimization, source sink matching and emerging opportunities will also be discussed.</p>
<p>In addition, using several worked examples and case studies, this VILT course will explain the principles behind the analysis of the costs and opportunities of a CCS / CCUS project from source to sink and examines the possibilities of using carbon dioxide from an economic perspective.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this VILT course, participants will be able to:</p>
<ul>
<li>Describe the economic considerations for CCS / CCUS projects</li>
<li>Measure and calculate the cost-effectiveness of CCS / CCUS</li>
<li>Identify the economic drivers for CCS / CCUS</li>
<li>Understand the value of source to sink matching</li>
<li>Outline the economic and environmental opportunities as well as challenges with using carbon dioxide injection in a range of applications</li>
<li>Recognize niche opportunities for CO<sub>2</sub> storage (coal seams, basalts, salt and others)</li>
</ul>
<p> </p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This VILT course is ideally suited for a technical audience such as <strong>geoscientists, petroleum and chemical engineers</strong> as well as professionals such as <strong>economists, regulators, legal staff and managers</strong> wishing to learn more about the details of economic aspects and the basis for techno-economic analysis of Carbon Capture, Utilization and Storage projects. The VILT course is presented in an interactive workshop format, allowing for discussions.</p>
<p>Participants should have:</p>
<ul>
<li>Basic background knowledge of CCUS technologies</li>
<li>Experience with oil and gas, coal or other energy projects</li>
<li>Basic understanding of the energy industry</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>The VILT course will be delivered online in <strong>2 half-day sessions comprising</strong> <strong>4 hours per day,</strong> with 2 breaks of 15 minutes per day. The VILT course is presented in an interactive workshop format that allows discussion.</p>
<p>Course Duration: 2 half-day sessions, 4 hours per session (8 hours in total).</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader received his B.Eng. in Chemical and Environmental Systems in 2002 from TecnolÃ³gico de Monterrey, Mexico, and his Ph.D. in Chemical Engineering in 2008 from the University of New South Wales (UNSW), in Sydney, Australia, at the UNESCO Centre for Membrane Science and Technology. His doctoral used computational fluid dynamics (CFD) to analyse the flows within membrane modules used for water treatment and desalination. He also worked on a desalination linkage project between the UNSW and the European Union, as part of Framework Programme 6.</p>
<p>From 2009 to 2014, he worked for the Cooperative Research Centre for Greenhouse Gas Technologies (CO2CRC), where he led the research into CO2 Transport Networks, co-led the development of a techno-economic model for the analysis of Carbon Capture and Storage (CCS) projects, and collaborated on several consultancy and feasibility studies conducted by CO2CRC for both Government and Industry. From 2014 to 2019, he held a CONACYT Research Fellowship at the Instituto TecnolÃ³gico de Sonora (ITSON) in Mexico, where he led collaborative research projects dealing with RO membrane biofouling (IHE-Delft), membrane modifications, solar energy use for desalination (CSIR-CSMCRI India) and CFD modelling of the hydrodynamics in membrane modules (UMP Malaysia).</p>
<p>Since July 2019, he is a Research Fellow in the School of Chemical and Biomolecular Engineering at the University of Sydney, where his research focuses on finding ways to reduce the cost, energy use and environmental impact of technologies for providing clean energy and water. From 2015 to 2020, he was a Member of the Board of Directors of the Mexican Society of Membrane Science and Technology. He guest edited a special edition on CCS for the Journal 'Technologies' and is currently an Editorial Board member for the journal, 'Energies', a peer-reviewed open-access scientific journal. His research interests include improving the efficiency of osmotic membrane separation processes, modelling complex processes involving heat and mass transfer, and exploring the economic drivers of low emission technologies such as the Carbon Capture and Storage (CCS) chain.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Technoeconomic Modelling of Carbon Capture, Utilization & Storage (CCUS) Projects

<div fr-original-style="" style="box-sizing: border-box;">
<br fr-original-style="" style="box-sizing: border-box;"></div>
<section fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<h2 fr-original-style="" style="box-sizing: border-box;">About this training course</h2>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This 3-days training will provide a comprehensive review of integrity of wells exposed to carbon dioxide (CO2) in the context of Carbon Capture Utilization for enhanced oil recovery and Storage (CCUS). CO2 geological storage is a proven technology to reduce greenhouse gas emissions from sources such as coal power plants, cement kilns and steel mills. Wells are widely considered the most critical containment element, especially older wells that are not used to inject CO2 or monitor the plume evolution in the storage reservoir. The main reason for this perceived risk is the high corrosion rate of carbon steel when exposed to wet CO2, and the tendency of Portland cement to react with the gas.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The training course advanced contents build on 15 years&#39; experience in carbon storage, both in the development and deployment of technologies. First-hand, in-depth knowledge of the subject will allow us to debunk myths and focus on the real challenges of wells encountering CO2.</p>
</div>
</section>
<section fr-original-style="" style="box-sizing: border-box;">
<div id="accordion" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Objectives 

</div>
<div id="collapseOne" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">After the completion of this training course, participants will be able to:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Explain the CCUS market drivers</li>
<li fr-original-style="" style="box-sizing: border-box;">Examine the behavior of CO2, on surface and in the reservoir</li>
<li fr-original-style="" style="box-sizing: border-box;">Diagnose cement defects and design repairs</li>
<li fr-original-style="" style="box-sizing: border-box;">Understand the limits of Portland cement</li>
<li fr-original-style="" style="box-sizing: border-box;">Assess the benefits of different technologies and materials</li>
<li fr-original-style="" style="box-sizing: border-box;">Realize why geology is a dominant factor in cement performance</li>
<li fr-original-style="" style="box-sizing: border-box;">Critically choose the most appropriate monitoring techniques</li>
<li fr-original-style="" style="box-sizing: border-box;">Classify aging processes of cement, steel, and rock when exposed to CO2</li>
<li fr-original-style="" style="box-sizing: border-box;">Assess the risk of existing wells if they encounter the CO2 plume</li>
<li fr-original-style="" style="box-sizing: border-box;">Examine recent advances in real-time approaches to the production monitoring and lift management</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Target Audience 

</div>
<div id="collapseTwo" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This training course is suitable and will greatly benefit:</p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">All surface technical personnel such as process engineers &amp; technologists</li>
<li fr-original-style="" style="box-sizing: border-box;">Facility engineers, production engineers &amp; technologists</li>
<li fr-original-style="" style="box-sizing: border-box;">Drilling engineers and Well engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Design engineers and Integrity engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">P&amp;A engineers and Cementing engineers</li>
<li fr-original-style="" style="box-sizing: border-box;">Geologists</li>
<li fr-original-style="" style="box-sizing: border-box;">Senior management executives will benefit from this training as covers an overview of the technical and commercial details of CO2 capture technologies and risks involved.</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Course Level 

</div>
<div id="collapsecl" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Intermediate</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Training Methods 

</div>
<div id="collapseThree" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization.</span></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Course Duration: 3 days in total (21 hours).</span></em></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">Training Schedule</span></strong></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">0830 - Registration </span><span fr-original-style="" style="box-sizing: border-box;">0900 - Start of training </span><span fr-original-style="" style="box-sizing: border-box;">1030 - Morning Break </span><span fr-original-style="" style="box-sizing: border-box;">1045 - Training recommences </span><span fr-original-style="" style="box-sizing: border-box;">1230 - Lunch Break </span><span fr-original-style="" style="box-sizing: border-box;">1330 - Training recommences </span><span fr-original-style="" style="box-sizing: border-box;">1515 - Evening break </span><span fr-original-style="" style="box-sizing: border-box;">1530 - Training recommences </span><span fr-original-style="" style="box-sizing: border-box;">1700 - End of Training</span></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span fr-original-style="" style="box-sizing: border-box;">The maximum number of participants allowed for this training course is 20.</span></p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This course is also available through our Virtual Instructor Led Training (VILT) format.</p>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

Trainer

</div>
<div id="collapseFive" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your expert course leader is an engineer with a passion for well integrity and possesses 28 years of international experience in field operations, technology development and management in the oil &amp; gas and carbon storage sectors. Since 2018 he is program chair of the Well Integrity Technical Section of the Society of Petroleum Engineers (SPE). He is also author or co-author of 31 technical papers, a book chapter on CO2 geological storage and 7 patent applications. He delivers training on well integrity, plug and abandonment, asset integrity, risk management and QHSE across the Eastern Hemisphere, and carries out active research on harnessing geological barriers, modeling leaks through cement, and quantifying methane emissions from oil &amp; gas wells. He has extensive expertise in: Well integrity, cementing, corrosion, upstream oil &amp; gas (drilling, completion), carbon capture and storage, mathematical modeling, risk management, reliability, HSSE (health/safety/security/environment), asset integrity, management systems, sustainable development, project management, portfolio management, training, and technology development and innovation. He has personally worked on CCS projects in Europe (France, Germany, Netherlands, Norway), Algeria, Japan and USA.</p>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Partial list of companies that have benefited from the trainer&#39;s expertise: </strong></p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Vermilion Energy</li>
<li fr-original-style="" style="box-sizing: border-box;">Geostock</li>
<li fr-original-style="" style="box-sizing: border-box;">Aker BP</li>
<li fr-original-style="" style="box-sizing: border-box;">Shell</li>
<li fr-original-style="" style="box-sizing: border-box;">Statoil</li>
<li fr-original-style="" style="box-sizing: border-box;">ENI</li>
<li fr-original-style="" style="box-sizing: border-box;">TNO</li>
<li fr-original-style="" style="box-sizing: border-box;">Geogreen</li>
<li fr-original-style="" style="box-sizing: border-box;">Wintershall</li>
<li fr-original-style="" style="box-sizing: border-box;">Archer</li>
<li fr-original-style="" style="box-sizing: border-box;">INA and many more</li>
</ul>
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Recent CCS consulting track record:</strong></p>
<ul fr-original-style="" style="box-sizing: border-box;">
<li fr-original-style="" style="box-sizing: border-box;">Schlumberger</li>
<li fr-original-style="" style="box-sizing: border-box;">Total</li>
<li fr-original-style="" style="box-sizing: border-box;">Oxand</li>
<li fr-original-style="" style="box-sizing: border-box;">TNO</li>
<li fr-original-style="" style="box-sizing: border-box;">THREE60 Energy and others</li>
</ul>
</div>
</div>
</div>
<div fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
<p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &#39;One to One&#39; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;">
Request for further information post training support and fees applicable</p>
</div>
</div>
</div><div fr-original-style="" style="box-sizing: border-box;"><div fr-original-style="" style="box-sizing: border-box;">

<br fr-original-style="" style="box-sizing: border-box;"></div>
<div id="collapseSeven" fr-original-style="" style="box-sizing: border-box;">
<div fr-original-style="" style="box-sizing: border-box;">
               </div>
</div>
</div>
</div>
</section>

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring

<div>
</div>
<section>
<div>
<h2>About this training</h2>
<p>Carbon Capture and Storage (CCS) is an upcoming new technology that has a vital place within global efforts to decarbonise. It has a unique set of challenges, opportunities and risks to be understood and accommodated within appropriate legal, regulatory, and social and public license frameworks. The course has a strong international and global south emphasis with case studies on CCS projects and will touch on the role of CCS in developing country energy transition. The course satisfies a part of the market that is not currently catered for - the wider science, risks, financing, regulation, planning and social license aspects of CCS. These are issues that are as important as the technical issues in the sense that any of them can be a show-stopper for CCS.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, participants will be able to:</p>
<ul>
<li>Place CCS within the context of the global geological carbon cycle and the contribution to could make to carbon abatement</li>
<li>Explore the basic engineering and other challenges and solutions of CO2 transport and capture</li>
<li>Recognize the geological challenges and solutions of CO2 storage</li>
<li>Learn the methods of geological and environmental monitoring of CCS sites and why monitoring is important</li>
<li>Understand the policy and finance challenges and solutions of CCS projects</li>
<li>Know the importance of social license to operate and how to gain a social license to operate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course will cater for in-company legal specialists, finance, project managers, marketing and communications specialists; as well as geologists, planners and environmental scientists in regulatory or government roles in regions considering the development of CCS. The course will provide up to date and relevant information to help in understanding opportunities and in managing risk.</p>
<ul>
<li>Geoscientists</li>
<li>Government energy regulators and policy makers</li>
<li>Financiers and investors</li>
<li>Government natural resource and planning department</li>
<li>Environmental scientists</li>
<li>Finance professionals</li>
<li>Marketing and communication professionals</li>
<li>Legal specialists</li>
<li>Project managers</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is one of the most influential figures in British geoscience. He has 25 years' experience in geological, energy, and palaeontological science and research, including 8 years national level science leadership as the UK's chief geologist (Executive Chief Scientist and Director of Science and Technology of the British Geological Survey). He has been providing geoscience advice to Government for almost 15 years and has an excellent overview of Government policy, industrial activity and funding landscape in applied and energy geoscience, including CCUS and shale gas.  He is a well-known communicator of science and has published three single-author popular science books (one award-winning), including the best introductory book on CCS 'Returning Carbon to Nature' Elsevier 2013.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Introduction to Carbon Capture and Storage (CCS) for Non-Technical Professionals

<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p>Governments, regulators and energy companies are pursuing CO<sub>2</sub> storage technologies to meet their net-zero carbon commitments as well as targets set by the international Paris Agreement on climate change. For successfully executing Carbon Capture &amp; Storage (CCS) projects, various technical, operational, economic and environmental risks and associated stakeholders need to be managed.</p>
<p>In this <strong>5 half-day Virtual Instructor Led Training (VILT) course</strong>, the methods for managing risk in CCS projects are addressed <u>with a focus on CO<sub>2 </sub>injection and storage.</u> The VILT course will also demonstrate how to assess storage capacity of a potential CO<sub>2</sub> storage reservoir, model framing techniques, and well injectivity issues related to CO<sub>2</sub> injection. The potential leak paths will be discussed such as reservoir seals, leakage along faults and aspects of well integrity. In the VILT course, the design of a monitoring programme will also be discussed. The VILT course will be supported by various case studies.</p>
<p>This VILT course will cover the following modules:</p>
<ol>
<li>CCS projects in an international context</li>
<li>Site selection and site characterization</li>
<li>Storage capacity assessment</li>
<li>Injectivity assessment</li>
<li>Containment assessment</li>
<li>Measurement, monitoring &amp; verification</li>
</ol>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>On completion of this VILT course, participants will be able to:</p>
<ul>
<li>Uncover the functions and associated components required to capture, transport and store CO<sub>2</sub> in subsurface aquifers and (depleted) hydrocarbon reservoirs</li>
<li>Find a systematic and integrated approach to risk identification and assessment for CO<sub>2</sub> storage projects (maturation)</li>
<li>Appreciate the requirements (physics modelling) and uncertainties to assess the CO<sub>2</sub> storage capacity of a selected site.</li>
<li>Understand the challenges, data and methods to assess CO<sub>2</sub> well injectivity and well integrity</li>
<li>Identify the leakage pathways of a selected storage site, and understand the assessment methods and associated uncertainties</li>
<li>Learn how to design a monitoring program</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This VILT course is intended for all surface and subsurface engineers such as facility engineers, geologists, geophysicists, reservoir engineers, petrophysicists, production technologists/engineers, well engineers and geomechanical specialists. Also, (sub)surface team leads, project managers, business opportunity managers, decision executives, and technical risk assessment &amp; assurance specialists will benefit from this VILT course as it provides a common framework and workflow to develop a CCS project.</p>
<p><em><strong>For each class, it is highly recommended that a mix of disciplines mentioned above are represented to facilitate discussions from different perspectives.</strong></em></p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>This VILT course is built around cases in which teams work to identify and assess CO2 storage site issues using a systematic thought approach in this course. In addition, exercises are used to practise the aspects of the CCS risk assessment process. The VILT course provides a venue for discussion and sharing of good practices as well as opportunities to practise multi-discipline co-operation and facilitation.</p>
<p>Participants are encouraged to bring their own work issues and challenges and seek advice from the expert course leaders and other participants about all aspects of CCS.</p>
<p><strong>This VILT course will be delivered online in 5 half-day sessions comprising 4 hours per day, with 2 breaks of 10 minutes per day.</strong></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><strong>Trainer 1:</strong></p>
<p>Your expert course leader has more than 36 years of experience in the oil &amp; gas industry with Shell. He gained broad experience in petroleum engineering, with expertise in integrated production systems from subsurface, wells and surface. He has had assignments in Production Technology, R&amp;D, Production Chemistry, Rock Mechanics and Reservoir Engineering cEOR, with a proven track record in technology screening, development and deployment, field development planning, conceptual well design and Production System Optimization (PSO) of gas and oil fields as well as preparing Well, Reservoir &amp; Facility Management (WRFM) strategies and plans. He had also worked on assignments in NAM and did fieldwork in Oman, Gabon and Shell Nigeria. He is a skilled workshop facilitator. He discovered his passion for teaching following an assignment in Shell Learning. During his time in Shell, he developed and taught technical courses to Shell professionals via blended learning.</p>
<p><strong>Trainer 2:</strong></p>
<p>Your second expert course leader has over 30 years of experience identifying, assessing and mitigating technical risks with Shell. The main focal point of his experience is in subsurface and Geomechanical risks. He is the the founding father of various innovations in how we assess risks by tool development (for bore hole stability, 3D geomechanical field evaluations and probabilistic assessment). He also developed an eye for people motivation, change management and facilitation. He was also responsible for the Geomechanical competence framework, and associated virtual and classroom training programme in Shell for 10 years.</p>
<p><strong>Trainer 3:</strong></p>
<p>Your third expert course leader has more than 30 years of experience in Shell, focusing on research and development in drilling and offshore systems. His areas of expertise is in project management, finance, business planning, investment, development studies and economics models. In 2021, he worked on a project that looked into the economic evaluation of P18A field complex for CO<sub>2</sub> storage. He has an MSc in Mechanical Engineering (M.E.) TU Delft Netherlands (Hons) and a baccalaureate from Erasmus University Rotterdam.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Carbon Capture and Storage (CCS): Project Risks & How to Manage Them

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong> </h2>
<p>Geomechanical evaluations are about the assessment of deformations and failure in the subsurface due to oil &amp; gas production, geothermal operations, CO<sub>2</sub> storage and other operations. All geomechanical evaluations include four types of modelling assumptions, which will be systematically addressed in this training, namely:</p>
<p>1.      Geometrical modelling assumption: Impact of structural styles on initial stress and stress redistribution due to operations</p>
<p>2.      Formation (or constitutive) behaviour: Linear elastic and non-linear behaviour, associated models and their parameters, and methods how to constrain these using</p>
<p>3.      Initial stress: Relation with structural setting and methods to quantify the in-situ stress condition</p>
<p>4.      Loading conditions: Changes in pore pressure and temperature on wellbore and field scale</p>
<p>This 5 full-day course starts with the determination of the stresses in the earth, the impact of different structural styles, salt bodies, faulting and folding on the orientation of the three main principal stress components. Different (field) data sources will be discussed to constrain their magnitude, while exercises will be made to gain hands-on experience.</p>
<p>Subsequently, the concepts of stress and strain will be discussed, linear elasticity, total and effective stress and poro-elasticity in 1D, 2D and 3D, as well as thermal expansion. Participants will be able to construct and interpret a Mohr-circles. Also, different failure mechanisms and associated models (plastic, viscous) will be discussed. All these concepts apply on a material point level.</p>
<p>Next, geomechanics on the wellbore scale is addressed, starting with the stress distribution around the wellbore (Kirsch equations). The impact of mudweight on shear and tensile failure (fracturing) will be calculated, and participants will be able to determine the mudweight window stable drilling operations, while considering well deviation and the use of oil-based and water-based muds (pore pressure penetration). Fracturing conditions and fracture propagation will be addressed.</p>
<p>Field-scale geomechanics is addressed on the fourth day, focussing on building a 3D geomechanical model that is fit-for-purpose (focussing on the risks that need evaluation). Here, geological interpretation (layering), initial stress and formation property estimation (from petrophysical logs and lab experiments) as well as determining the loading conditions come together.</p>
<p>The course is concluded with interpretation of the field-wide geomechanical response to reservoir depletion with special attention to reservoir compaction &amp; subsidence, well failure and fault reactivation &amp; induced seismicity. Special attention is paid to uncertainties and formulating advice that impacts decision-making during development and production stages of a project.</p>
<p>This course can also be offered through Virtual Instructor Led Training (VILT) format.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completing of this course, the participants will be able to:</p>
<ul>
<li>Identify potential project risks that may need a geomechanical evaluation</li>
<li>Construct a pressure-depth plot based on available field data (density logs, (X)LOT, FIT, RFT)</li>
<li>Employ log-based correlation function to estimate mechanical properties</li>
<li>Produce a simplified, but appropriate geometrical (layered, upscaled) model that honours contrasts in initial stress, formation properties and loading conditions, including</li>
<li>Construct and interpret a Mohr-circle for shear and tensile failure</li>
<li>Calculate the mud weight that leads to shear and tensile failure (fracturing conditions)</li>
<li>Identify potential lab experiments to measure required formation properties</li>
<li>Describe the workflow and data to develop a field-wide fit-for-purpose geomechanical model</li>
<li>Discuss the qualitative impact of pressure and temperature change on the risk related to compaction, well failure, top-seal integrity and fault reactivation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is intended for <strong>Drilling Engineers, Well Engineers, Production Technologists, Completion Engineers, Well Superintendents, Directional Drillers, Wellsite Supervisors and others, who wish to further their understanding of rock mechanics and its application to drilling and completion</strong>.</p>
<p>There is no specific formal pre-requisite for this course. However, the participants are requested to have been exposed to drilling, completions and production operations in their positions and to have a recommended minimum of 3 years of field experience.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has over 30 years of experience in the Oil &amp; Gas industry, covering all geomechanical issues in the petroleum industry for Shell. Some of his projects included doing research and providing operational advice in wellbore stability, sand failure prediction, and oil-shale retortion among others. He guided multi-disciplinary teams in compaction &amp; subsidence, top-seal integrity, fault reactivation, induced-seismicity and containment. He was also involved in projects related to Carbon Capture Storage (CCS).</p>
<p>He is the founding father of various innovations and assessment tools, and developed new insights into the root causes seismicity induced by Oil &amp; Gas production. Furthermore, he was the regional coordinator for technology deployment in Africa, and Smart Fields (DOFF, iField) design advisor for Shell globally. He was responsible for the Geomechanical competence framework, and associated virtual and classroom training programme in Shell for the last 10 years. He served as one of the Subject Matter Expert (SME) on geomechanics, provided Technical Assurance to many risk assessments, and is a co-author of Shell's global minimun standard on top-seal integry and containment. He has a MSc and PhD in Civil Engineering and computational mechanics from Delft University of Technology, The Netherlands.</p>
<p><strong>Training experience:</strong></p>
<p>Developed and delivered the following (between 2010 and 2020):</p>
<ul>
<li>The competence framework for the global geomechanical discipline in Shell</li>
<li>Online Geomechanical training programs for petroleum engineers (post-doc level)</li>
<li>The global minimum standard for top-seal integrity assessment in Shell</li>
<li>Over 50 learning nuggets with Subject Matter Experts</li>
<li>Various Shell virtual Geomechanical training courses covering all subjects</li>
<li>Developed Advanced Geomechanical training program for experienced staff in Shell</li>
<li>Coaching of KPC staff on Geomechanics and containment issues on an internship at Shell in The Netherlands, Q4 2014</li>
<li>Lectured at the Utrecht University summer school (The Netherlands, 2020) on induced seismicity among renowned earthquake experts (Prof. Mark Zoback, Prof. Jean-Philippe Avouac, Prof. Jean-Pierre Ampuero and Prof. Torsten Dahm) (https://www.nwo.nl/onderzoeksprogrammas/deepnl/bijeenkomsten/6-10-juli-2020-deepnl-webinar-series-induced-seismicity)</li>
<li>Lectured at the Danish Technical University summer school (Copenhagen, 2021) summer school on Carbon Capture and Storage (https://www.oilgas.dtu.dk/english/Events/DHRTC-Summer-School)</li>
<li>Virtual Carbon Capture and Storage (CCS): Project Risks &amp; How to Manage Them training course (October and November 2021)</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Geomechanics at Well and Field Scale

<div>
</div>
<section>
<div>
<h2>About this <strong>Virtual Instructor Led Training (VILT)</strong></h2>
<p>This <strong>5 half-day VILT course</strong> will comprehensively cover the technical aspects of gas processing. The scope will be from the wellhead through the typical gas processing plant and discuss gas gathering (pipeline hydraulics), natural gas treating (H2S, CO2 removal), acid gas injection and sulfur recovery. One unique aspect of this training course is the operations and troubleshooting discussions in each module. This VILT course is suited to technical personnel or technical management.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>After the completion of this VILT course, participants will be able to:</p>
<ul>
<li>Grasp the key specifications of natural gas and liquid products</li>
<li>Understand the physical and transport properties of gases and liquids and liquid-vapor phase behavior</li>
<li>Explore the various technologies for processing natural gas and to make the specifications</li>
<li>Examine the design of the technologies</li>
<li>Learn how to diagnose operating problems to keep facilities running reliably</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This VILT course is intended for all surface technical personnel such as process engineers &amp; technologists, facility engineers and production engineers &amp; technologists. This VILT course will greatly benefit but not limited to:</p>
<ul>
<li>Process, petroleum and production engineers</li>
<li>Field operators and technicians</li>
<li>Personnel involved in gas treatment and processing</li>
<li>Managers and Supervisors involved with gas processing operations</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>The VILT course will be delivered online in <strong>5 half-day sessions comprising 4 hours per day</strong>, with 2 breaks of 10 minutes per day. Course Duration: 5 half-day sessions, 4 hours per session (20 hours in total).</p>
<p>The maximum number of participants for this course is 20 persons.</p>
<p><strong>Case studies and Exercises: </strong></p>
<p>This VILT course will use actual case references throughout its duration in various forms. This will allow the application of the participants' newly-acquired knowledge. Case studies also stimulate independent thinking and discussion among the participants</p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader has written several papers that have been published in both academic and industry journals. He has over 30 years of industry experience, specializing in gas processing (pipeline hydraulics, separation, dehydration, treating, sulphur recovery and refrigeration processes) and also has experience with crude oil dehydration, stabilization and micro-refining topping plants. He has experience with developing new technology and is recently involved in lithium, waste biomass and used motor oil pyrolysis and geothermal projects. He has recognized expertise in thermodynamics and physical and transport properties of fluids. He has consulted for several EPC and operating companies through his company Chem-Pet Process Tech., and currently holds the role of Director of Technology in an integrated engineering and solutions provider to the energy industry. He is currently involved with a small power-based carbon capture project as well as helping clients determine the best options for utilities decisions. He has been involved with CO2 dehydration and CO2 flood gas treating as well as acid gas injection projects for several years.</p>
<p><strong>Highlighted Achievements:</strong></p>
<ul>
<li>Developed ORC geothermal model to determine the available power from wells in Alberta</li>
<li>Acting on the Technical Advisory Board for E3 Metals, extracting lithium from formation water.</li>
<li>Acted as a Subject Matter Expert for assessing the performance of the Plains Midstream Canada, Empress 1 Deep Cut Straddle Plant in a potential litigation.</li>
<li>Acted as an Expert Witness for JL Transportation patent defence of a dense phase technology.</li>
<li>Process engineer lead on the addition of the new Orloff gas plant for Deltastream. Also troubleshooted the oil battery shipping pump, plate exchanger and FWKO and treater.</li>
<li>Evaluated gas processing and sulphur recovery options for new feeds to the Zhaikmunai Zelenovsky Gas Plant, Kazakhstan (with PM Lucas, Serbia).</li>
<li>Completed capacity analysis for hydrocarbon dew point versus liquid recovery of three trains at Birchcliff Pouce Coupe facility including amine unit, refrigerated gas plant and acid gas injection.</li>
<li>Completed process design for CO2 flue gas dehydration for Husky Energy Inc (with Status Engineering)</li>
<li>Provided simulations of EnCana Foster Creek and Christina Lake and Husky McMullen SAGD facilities (with Vista Projects). Performed process engineering for Cenovus Pelican Lake SAGD pilot (with GRB Engineering) Bear Lake heavy oil polymer injection pilot (with GRB Engineering).</li>
<li>Lead process engineer on the design of IEC Kerrobert crude oil micro-refinery (topping plant).</li>
<li>Provided engineering support and troubleshooting for Enerchem Slave Lake Crude tower and product blending (with Status Engineering).</li>
</ul>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Natural Gas Properties & Sulphur Recovery

<div>
</div>
<section>
<div>
<h2>About this Training Course</h2>
<p>More energy companies today are setting ambitious net-zero targets and are expected to pour billions into the voluntary carbon offset market by the end of this decade. To get to net zero emissions, companies will need to balance emissions with nature and technology-based offsets. Markets are the best tool for connecting carbon sources and sinks. Many countries will not have enough supply inside their borders and will need to co-operate with those who have extra greenhouse gas removal potential.</p>
<p>The energy industry is in search of effective climate tools as pressure mounts from investors and consumers for more progress on fighting rising emissions. Corporations fighting to cut their carbon footprint have for years focused on internal reduction measures. Many are now adding to that effort by turning to carbon credits, a process made easier as verification and registration tools mature.</p>
<p>One particular category of carbon offsets leads the way: high-quality, nature-based carbon credits. These represent the largest category of carbon credit projects in the voluntary carbon market, comprising nearly half of credits issued. Public concern about this practice focused on the additionality, leakage, and integrity of carbon offsets that are created through reforestation, land preservation, carbon capture and other projects.</p>
<p>Lack of standardization and government regulation has also increased uncertainty for all participants in carbon markets, creating risks for developers of credit-generating projects and offset purchasers. Demand for higher-quality offsets will value projects that were subjected to due diligence and rely upon reputable third-party verification. Companies purchasing offsets generated by permanent and quantifiable projects will therefore be in the best position moving forward.</p>
<p>In this highly interactive training course, your course instructor will guide you through the latest developments and best procurement practices to successfully operate in the voluntary carbon market.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p><span>At the end of this course, the participants will be able to:</span></p>
<ul>
<li><span>Discover the current state of the carbon economy</span></li>
<li><span>Gain insights into the voluntary carbon market</span></li>
<li><span>Learn about the different type carbon credits available</span></li>
<li><span>Examine how companies can reach net zero target by using carbon offsets</span></li>
<li><span>Uncover best practices in carbon credit procurement strategy</span></li>
<li><span>Learn the pricing dynamics carbon credits</span></li>
<li><span>Examine how to identify and ensure high quality credits</span></li>
<li><span>Obtain key learning from flawed carbon offset projects</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p><span>This course is intended for:</span></p>
<ul>
<li><span>Energy transition team leaders</span></li>
<li><span>Carbon credit procurement professionals</span></li>
<li><span>ESG strategy team leaders</span></li>
<li><span>Finance and accounting professionals</span></li>
<li><span>Low carbon business analysts or economists</span></li>
<li><span>Corporate business sustainability professionals</span></li>
<li><span>Legal, compliance and regulatory professionals</span></li>
<li><span>Carbon trading professionals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Intermediate</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a skilled and accomplished professional with over 25 years of extensive C-level experience in the energy markets worldwide. He has a strong expertise in all the aspects of (energy) commodity markets, international sales, marketing of services, derivatives trading, staff training and risk management within dynamic and high-pressure environments.</p>
<p>He received a Master's degree in Law from the University of Utrecht in 1987. He started his career at the NLKKAS, the Clearing House of the Commodity Futures Exchange in Amsterdam. After working for the NLKKAS for five years, he was appointed as Member of the Management Board of the Agricultural Futures Exchange (ATA) in Amsterdam at the age of 31. While working for the Clearing House and exchange, he became an expert in all the aspects of trading and risk management of commodities. In 1997, he founded his own specialist-consulting firm that provides strategic advice about (energy) commodity markets, trading and risk management.</p>
<p>He has advised government agencies such as the European Commission, investment banks, major utilities and commodity trading companies and various energy exchanges and market places in Europe, CEE countries, North America and Asia. Some of the issues he has advised on are the development and implementation of a Risk Management Framework, investment strategies, trading and hedging strategies, initiation of Power Exchanges (APX) and other trading platforms, the set-up of (OTC) Clearing facilities, and feasibility and market studies like for the Oil, LNG and the Carbon Market. The latest additions are (Corporate) PPAs and Artificial Intelligence for energy firms.</p>
<p>He has given numerous seminars, workshops and (in-house) training sessions about both the physical and financial trading and risk management of commodity and carbon products. The courses have been given to companies all over the world, in countries like Japan, Singapore, Thailand, United Kingdom, Germany, Poland, Slovenia, Czech Republic, Malaysia, China, India, Belgium and the Netherlands.</p>
<p>He has published several articles in specialist magazines such as Commodities Now and Energy Risk and <strong>he is the co-author of a book called A Guide to Emissions Trading: Risk Management and Business Implications published by Risk Books in 2004.</strong></p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Educators providing Courses in Nottingham

Courses matching "Carbon Capture"

Carbon Capture, Utilization & Storage (CCUS)

By EnergyEdge - Training for a Sustainable Energy Future

Technoeconomic Modelling of Carbon Capture, Utilization & Storage (CCUS) Projects

By EnergyEdge - Training for a Sustainable Energy Future

Carbon Capture, Utilization & Storage (CCUS) Well Design & Monitoring

By EnergyEdge - Training for a Sustainable Energy Future

Introduction to Carbon Capture and Storage (CCS) for Non-Technical Professionals

By EnergyEdge - Training for a Sustainable Energy Future

Carbon Capture and Storage (CCS): Project Risks & How to Manage Them

By EnergyEdge - Training for a Sustainable Energy Future

Geomechanics at Well and Field Scale

By EnergyEdge - Training for a Sustainable Energy Future

Natural Gas Properties & Sulphur Recovery

By EnergyEdge - Training for a Sustainable Energy Future

Best Practices Procurement for Carbon Offsets in the Energy Industry

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location