• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

33 Educators providing Courses in London

British Compressed Air Society

british compressed air society

London

In a world of constantly changing legislation and standards, BCAS plays a crucial role in driving progress in the compressed air industry. Founded in 1930, the British Compressed Air Society is the only UK technical trade association open to manufacturers, distributors and end users of compressors, vacuum pumps, pneumatic tools and allied products. Our role is to provide unbiased advice on legislation, technical standards, education, compliance, safety and environmental matters that affect suppliers and users of compressed air and vacuum systems. BCAS Structure There are tiers of activity within BCAS: BCAS Board Permanent Committees The board is made up of the President, Vice President, Last Past President and Executive Director plus elected and co-opted seats. Each group member has a permanent place on the board. There are 5 board seats elected by the membership and the remainder are co-opted for skills required within BCAS. Elected & Co-opted board members stand down at the first change of president but may be re-elected/re-co-opted to serve on the board. BCAS also has sector committees, special committees and working groups, which are set up from time to time to address specific issues. The chair of the committee is selected by ballot of the sector committee. The current committees are: Compressor Committee Low Pressure & Vacuum Committee Air Treatment & Applications Committee Distribution Committee Training & Development Committee Statistics Committee In addition, BCAS plays a crucial role in upholding standards and advising its members about changing legislation and standards to ensure compliance and safety within the industry. It is also an active member of Euris to lobby on UK matters , Pneurop to lobby on European legislation, BSI and the International Organization for Standardization (ISO). Crucially, BCAS is an independent source of advice and technical help to ensure that compressor equipment, its installation and maintenance is energy efficient, compliant and safe. BCAS is calling on compressed air users to save energy from their compressed air system with the 10% Taskforce.

Courses matching "Legislation"

Show all 155

Phlebotomy (Venepuncture) Training - In Person

4.9(21)

By AB Health Group

Course Introduction Our Venepuncture and Phlebotomy training equips delegates with the skills and knowledge needed to take blood safely. Please note: this course is for health care professionals and nurses only. About this event Applicable to Nurses, Health Care Assistants and Phlebotomists in primary care, the community, hospitals or nursing homes, this course is interactive and involves a demonstration session on performing blood tests. Our venepuncture training will give delegates the theoretical and practical awareness to undertake a competence assessment framework in the workplace that will deem them competent to take blood safely and appropriately. Each delegate will receive a competence-based framework to allow them to do this. Course Aims Identify and describe equipment used for routine venepuncture Be able to assess and select suitable sites used for venepuncture as well as locations to avoid Describe and utilize the required steps to perform routine venepuncture Describe actions that ensure safety during performance of a venepuncture Identify suitable vein selection and identify factors influencing this Understand relevant professional and legal issues Be able to identify potential complications Understand anatomy and physiology and correct vein selection Be familiar with equipment and exercise choice in using most appropriate equipment Practice safely in terms of infection control and waste management Become skilled and competent at phlebotomy To recognise any complications arising and be able to take the appropriate action Course Content Background and importance of training and competence Supervision and practice Scope and responsibilities Accountability Professional and legal issues Consent and capacity What is phlebotomy? Tools of the trade-equipment Needles and patient safety Blood collection systems and devices Syringes and when to use them Blood collection tubes Labelling Anatomy and physiology Vein Selection: - Identification of Veins - Arm Veins - Hand Veins Vein assessment Unacceptable sites for venous collection Venepuncture procedure Attempts Order of Fill Specimen collection procedures Specimen handling post-phlebotomy Personal protective equipment Needle stick injuries Legislation-EU Directives Disposal Needle phobias Dealing with anxiety/fainting etc. Practical session Potential Complications (including infection control) Practical Application - techniques and troubleshooting Case scenarios Troubleshooting Audit Who should attend / would be applicable? Nurses HCAs Those interested in careers as Phlebotomists AB Health Group awards CPD points / certificate of attendance for each course. If you would prefer an accredited certificate by our accrediting body Aim Qualifications we can organise this. The charge for the certificate including postage is £30.00. Annie Barr AB Health Group Organiser Description Annie Barr is a leading provider of high quality, accredited healthcare training. With a selection of engaging healthcare training that has been developed by experts to equip you and your workforce with the skills, knowledge and competence needed to provide compassionate and high quality care.

Phlebotomy (Venepuncture) Training - In Person
Delivered In-Person in Newcastle Upon Tyne + 2 more + more
£230

Environmental legislation (In-House)

By The In House Training Company

A thorough account of the UK and European legal framework and its requirements as regards managing environmental performance. This course will help staff to understand: The framework of UK and European legislation and its enforcement The principal features of the legislation as they apply to your organisation's activity/product/service The benefit of having an Environmental Management System such as ISO 14001 How their own actions and decisions can either expose or protect the organisation in relation to its legal obligations 1 Introduction and objectives 2 Introduction to environmental law and enforcement Sources of law (European and UK) Structure and enforcement Key legislation 3 Integrated Pollution Prevention and Control (IPPC) and Local Air Pollution and Control (LAPC) Pollution and Prevention Control Act 1999 EC Directives on PPC The meaning of BAT Transitional provisions Fit and proper persons Control of emissions to air National Air Quality Strategy 4 Packaging and producer responsibilities Who, what and how The Producer Responsibility Obligations (Packaging Waste) Regulations Obligations and exemptions Registration Recycling and recovery obligations Records Duties of the Environment Agency Offences Developments 5 Waste management National Waste Strategy Waste minimisation (re-use/recycling) Waste definition Disposal and recovery Controlled waste management Hazardous waste management 6 Proposed Legislation and EC Directives EU Commission's waste and resources strategies Implementation of ELV (End of Life Vehicles) Directive WEEE (Waste Electrical and Electronic Equipment) Directive transposition into UK legislation Other producer responsibility initiatives Other proposals from the EU 7 Conclusion Open forum Summary Close

Environmental legislation (In-House)
Delivered in Harpenden or UK Wide or OnlineFlexible Dates
Price on Enquiry

Racking Inspection (On-Site)

4.9(182)

By You Can Do It .Training

This course enables you to comply with Health and Safety Legislation by training your staff to...

Racking Inspection (On-Site)
Delivered In-Person in Stoke on Trent or UK WideFlexible Dates
£640

COSHH & Spill Kit (Half Day) (On-Site)

4.9(182)

By You Can Do It .Training

COSHH training course will help to ensure that your business complies with relevant legislation...

COSHH & Spill Kit (Half Day) (On-Site)
Delivered In-Person in Stoke on Trent or UK WideFlexible Dates
£640

City & Guilds Level 2 Award in Working in High Risk Confined Spaces - 6160-03

By Vp ESS Training

City & Guilds Level 2 Award in Working in High Risk Confined Spaces - 6160-03 - This course is designed to provide delegates that need to enter medium and high risk confined spaces with an in-depth understanding of legislation, regulations and safe systems of work. This course includes recognising all risk levels of confined spaces. Book via our website @ https://www.vp-ess.com/training/confined-spaces/6160-03-city-and-guilds-level-2-award-in-working-in-high-risk-confined-spaces/ or via email at: esstrainingsales@vpplc.com or phone on: 0800 000 346

City & Guilds Level 2 Award in Working in High Risk Confined Spaces - 6160-03
Delivered In-Person in Aberdeen + 9 more or UK WideFlexible Dates
£620

City & Guilds Level 3 Award in Control Entry and Arrangements for Confined Spaces (High Risk) - 6160-04

By Vp ESS Training

City & Guilds Level 3 Award in Control Entry and Arrangements for Confined Spaces (High Risk) - 6160-04 - This course is designed to provide delegates that need to enter medium and high risk confined spaces with an in-depth understanding of legislation, regulations and safe systems of work. This course includes recognising all risk levels of confined spaces. Book via our website @ https://www.vp-ess.com/training/confined-spaces/6160-04-level-3-award-in-control-entry-and-arrangements-for-confined-spaces-(high-risk)/ or via email at: esstrainingsales@vpplc.com or phone on: 0800 000 346

City & Guilds Level 3 Award in Control Entry and Arrangements for Confined Spaces (High Risk) - 6160-04
Delivered In-Person in Aberdeen + 9 more or UK WideFlexible Dates
£585

NVQ Level 3 - Experienced Worker Route

5.0(9)

By Optima Electrical Training

If you want to start installing independently or with an electrical contractor look no further as this course will give you the skills and knowledge required. This package which will allow you to become a fully qualified domestic installer and enable you to join a Competent Person Self-Certification Scheme and certify your own domestic work.

NVQ Level 3 - Experienced Worker Route
Delivered In-Person in London + 2 more or UK WideFlexible Dates
£1,615 to £1,995

City & Guilds Level 2 Award in Entrant and Entry Controller for Confined Spaces (Medium Risk) - 6160-09

By Vp ESS Training

City and Guilds level 2 Award in Entrant and Entry Controller for Confined Spaces (Medium Risk) - 6160-09 - This course is designed to provide delegates that need to enter confined spaces and hazardous areas with an in-depth understanding of the Legal requirements and the associated legislation, hazard identification and suitable control measures. Book via our website @ https://www.vp-ess.com/training/confined-spaces/6160-09-city-and-guilds-level-2-award-in-entrant-and-entry-controller-for-confined-spaces-(medium-ri/ or via email at: esstrainingsales@vpplc.com or phone on: 0800 000 346

City & Guilds Level 2 Award in Entrant and Entry Controller for Confined Spaces (Medium Risk) - 6160-09
Delivered In-Person in Aberdeen + 9 more or UK WideFlexible Dates
£400

NVQ Level 3 - Experienced Worker Route

5.0(9)

By Optima Electrical Training

The NVQ Level 3 is designed to provide both new entrants and those seeking progression in their career, with the opportunity to develop the necessary skills to carry out job roles and responsibilities associated with the installation and maintenance of Electrotechnical systems. The EWR is for electricians who have been working in the industry for at least 5 years but have not formally completed an industry apprenticeship or Level 3 NVQ qualification. Successful completion of the NVQ and AM2 assessment will satisfy the entry criteria for JIB accredited Gold Card status. Bear in mind that the C&G 2391-50 and 18th Edition courses are pre-requisites to the Experienced Worker route. In case you don’t hold them, we can help you with a Pre-Experienced Worker Route package.

NVQ Level 3 - Experienced Worker Route
Delivered In-Person in London + 2 more or UK WideFlexible Dates
£1,495 to £1,795

NVQ Level 3 in Electrical Installations

5.0(9)

By Optima Electrical Training

The NVQ Level 3 is designed to provide both new entrants and those seeking progression in their career, with the opportunity to develop the necessary skills to carry out job roles and responsibilities associated with the installation and maintenance of Electrotechnical systems. There are two options to complete the NVQ Level 3 in Electrical Installations, these are the C&G 2346 and C&G 2357. Successful completion of the NVQ and AM2 assessment will satisfy the entry criteria for JIB accredited electricians

NVQ Level 3 in Electrical Installations
Delivered In-Person in London + 2 more or UK WideFlexible Dates
£1,795 to £1,995