1309 Courses in London

Tissue viability course Wound care training for healthcare professionals Pressure sore management Wound assessment techniques Evidence-based wound care Chronic wound management Diabetic ulcer treatment Venous leg ulcer care CPD accredited course Nursing revalidation hours Healthcare professional wound care skills Hands-on wound care practice Wound dressings and interventions Pressure sore prevention strategies Simulation wound care scenarios Tissue viability principles Optimal wound healing techniques Wound care certification program Advanced wound care education Enhancing patient outcomes through wound care

About this Training Course The drill string is the simplest piece of equipment in use on a drilling rig and at the same time, the most critical piece. We use the qualifier 'basic' because although 99% of the drill string comprises plain tubes that are just screwed together, the lowest section, just above the bit, can go to extreme loading and is fitted with highly sophisticated electronics packages providing both positional and lithological data as well as a steering system to drive and orient the bit. The principle tasks of the drill string are also deceptively simple. These are to: Convey each drill bit to the bottom of the hole and then to retrieve it when worn, Act as a conduit to convey drilling fluid at high pressure down to the bit and Transmit torque from surface to bit, occasionally in concert with a hydraulic motor to drive this bit. This 3 full-day course will cover in detail what it takes to decide on minimum drill string specifications, which are able to support the loads to which it will be subjected. In addition to the need to use a drill string with minimum strength requirements, we also need to ensure that we can prevent drill string failure. If the failure consists of a small split or leak of any kind, then the time involved may be little more than that required for a roundtrip to change the bit. If the string parts, then the recovery is likely to take a considerable amount of time. In a worst case scenario, the fish in the hole may prove impossible to retrieve, requiring a sidetrack. A less than optimal design of the string will reduce the efficiency of the operation and almost always leads to premature bit wear. This is particularly true when we are unable to measure and control the dynamics of the drill string as a whole and the bottomhole assembly in particular. Axial vibrations, torsional vibrations and lateral vibrations may take place in various degrees of severity. The behaviour of the drill string while operating under torsional vibrations is thought to be of great importance and may result in torsional buckling. This course will also cover the drilling optimization limiters, how to identify them and how to remove them. This is done by understanding the drill string dynamics - by operating under the most favourable conditions and by measuring the dynamics in the vicinity of the bit (or at the bit) in order to make timely adjustments. Training Objectives The course homes in what office staff needs to know and plan for and what field staff needs to know and implement. By the end of this course, participants will be familiar with: Critical dimensions of common drill pipe and weld-on tool joints and its relation to yield for calculation of tensile, torsional and burst resistance. Make-up torque of connections that relate to the tool joint dimensions and the torsional strength of that connection. Use of design factors and safety factors on tensile and torsional strength in relation to new and worn state. Conditions which could lead to drill pipe collapse. Situations where limitations on sinusoidal (snake) and helical buckling will apply and the influence of radial clearance and deviation. Failure of drill pipe (fatigue) and the circumstances under which these would occur (rotation across doglegs, pipe in compression etc). Mechanism under which hardbanding would induce casing wear and the methods applied to measure and prevent any significant wear. Drill pipe inspection methods we apply to identify early flaws/cracks/corrosion, to measure dimensions, to inspect tool joints etc. Common BHA components, including heavy wall drill pipe, their external/internal dimensions, connections (API, proprietary) and appearance (such as spiral). Significance of thread compounds to ensure the correct make-up torque is applied. Significance of drill string/BHA 'neutral point' in the context of drill string component failure. Basic design principles for a BHA make-up in a vertical, low/medium deviated and highly deviated well in terms of weight transfer and drag/torque. Stabilization principles for a pendulum (vertical), a stabilized (vertical or tangent), a build and a drop-off assembly. BHA design and stabilization in relation to mitigation/elimination of vibration and to the elimination of tension, torsion or fatigue failure. Matching bit aggressiveness, gauge length, BHA stabilization, steerability and Mechanical Specific Energy (MSE) to mitigate the severity of any vibration. Bit efficiency and reduction of wear by understanding mechanical and hydraulic limiters. How to perform a passive or active drill-off test. Importance of being conversant with API 7G RP and/or equivalent data books, to look up/check the recommended tensile/torque and other parameters for the drill string in use. Target Audience This course is intended for staff directly or indirectly involved in the delivery of challenging wells such as junior to senior well engineers, both in office-based planning and operations and field-based operator/contractor supervisory staff such as company men and toolpushers. Trainer Your expert course leader has over 45 years of experience in the Oil & Gas industry. During that time, he has worked exclusively in the well engineering domain. After being employed in 1974 by Shell, one of the major oil & gas producing operators, he worked as an apprentice on drilling rigs in the Netherlands. After a year, he was sent for his first international assignment to the Sultanate of Oman where he climbed up the career ladder from Assistant Driller, to Driller, to wellsite Petroleum Engineer and eventually on-site Drilling Supervisor, actively engaged in the drilling of development and exploration wells in almost every corner of this vast desert area. At that time, drilling techniques were fairly basic and safety was just a buzz word, but such a situation propels learning and the fruits of 'doing-the-basics' are still reaped today when standing in front of a class. After some seven years in the Middle East, a series of other international assignments followed in places like the United Kingdom, Indonesia, Turkey, Denmark, China, Malaysia, and Russia. Apart from on-site drilling supervisory jobs on various types of drilling rigs (such as helicopter rigs) and working environments (such as jungle and artic), he was also assigned to research, to projects and to the company's learning centre. In research, he was responsible for promoting directional drilling and surveying and advised on the first horizontal wells being drilled, in projects, he was responsible for a high pressure drilling campaign in Nigeria while in the learning centre, he looked after the development of new engineers joining the company after graduating from university. He was also involved in international well control certification and served as chairman for a period of three years. In the last years of his active career, he worked again in China as a staff development manager, a position he nurtured because he was able to pass on his knowledge to a vast number of new employees once again. After retiring in 2015, he has delivered well engineering related courses in Australia, Indonesia, Brunei, Malaysia, China, South Korea, Thailand, India, Dubai, Qatar, Kuwait, The Netherlands, and the United States. The training he provides includes well control to obtain certification in drilling and well intervention, extended reach drilling, high pressure-high temperature drilling, stuck pipe prevention and a number of other ad-hoc courses. He thoroughly enjoys training and is keen to continue taking classes as an instructor for some time to come. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Are you ready to take your photography skills to the next level? The Photography Lab is designed for enthusiasts and professionals alike, providing the perfect environment to experiment, learn, and perfect your art. 🌟 Expert Mentorship: Get personalized feedback and guidance to refine your techniques. 🌟 Creative Experimentation: Explore various photography styles and techniques in a supportive, innovative environment.  🌟 Collaborative Community: Connect with fellow photographers, share ideas, and collaborate on projects. Build a network of like-minded creatives passionate about photography. Join Us Today! Spaces in our Photography Lab are limited, so don’t miss this unique opportunity to elevate your skills and creativity. Whether you’re aiming to turn your passion into a profession or simply want to explore new techniques, our lab offers the perfect platform. Total length: 7.5 hours divided in 5 sessions 1.5 hours each (Thursdays only) Sessions (18:30-20:00): 1) 17/10/2024 2) 24/10/2024 3) 31/10/2024 4) 07/11/2024 5) 14/11/2024 This lab is for adults only. Maximum number of participants: 10 Step into a world of endless possibilities at our Photography Lab. Transform your vision into reality and capture the world like never before! Booking is necessary.

Help with chronic pain – learn the powerful psychological and behavioural techniques that alleviate persistent pain and accelerate healing with pain specialist Dr Grahame Brown Accredited CPD Certificate: 6 hours Length: 1 day (9.30am - 4.00pm GMT) Fantastic to have the opportunity to train with this specialist. Thoroughly enjoyed this online course – the best I have attended...CLINCIAL HYPNOTHERAPIST Live online training – Join Dr Grahame Brown on Wednesday 24th April 2024 for this practical live online training event via Zoom, you will have plenty of opportunities to ask questions. Simply book your place and we will email you the Zoom link the day before the event. BONUS RECORDING – the training is recorded, in case anyone experiences technical difficulties on the day, so you will also get a recording for a limited time afterwards to maximise your learning. Can’t make this date?  Register your interest and we’ll let you know when there’s another. Why you should attend Pain is endemic in our society and whatever the cause – back pain, migraine, arthritic pain, dental pain, irritable bowel (IBS), labour/menstrual pain, cancer pain, psychogenic pain, psychosomatic pain – it can be incapacitating. Chronic pain is any pain which lasts for more than three months and it is estimated that between 25–40% of our population suffer from persistent or chronic pain. The sociological and economic costs of this are enormous but it is in the personal human suffering involved – mental as well as physical – that the real costs should be measured. Many are desperate for effective help to relieve their pain and the associated effects, such as insomnia and depression. This online workshop – with leading pain and musculoskeletal medicine consultant Dr Grahame Brown – gives you important new information about how we experience pain – derived from the latest neuroscience – and a powerful range of psychological techniques for managing pain naturally, preventing it from escalating and speeding up healing. You will discover how people can be helped out of the vicious cycle of chronic pain and how, by working holistically through the bio-psycho-social model, suffering can be dramatically reduced. You don’t need to have any prior medical knowledge to learn from and enjoy the day – you will leave with a much clearer understanding of what is going on in the mind/body system, what you can do to reduce suffering when pain persists and ways to prevent chronic ongoing pain from developing. It is a key event if you work with people suffering from pain at any stage (from recent onset, recurrent to persistent) or if you would like to find out how to successfully manage pain without medication. You will learn a wide variety of pain management techniques, which can easily be integrated into your work, to help relieve pain and promote recovery – often in just one session. Dr Grahame Brown has a real gift for helping people heal themselves – I know: I’m one of them!CHRISTOPHER BUCKLEY, PROFESSOR OF RHEUMATOLOGY, UNIVERSITY OF BIRMINGHAM What will you learn An increased understanding of how we perceive pain (from the latest neuroscientific research) and what is happening in the mind/body system A road map for helping people out of the vicious cycle of chronic pain, or to stop it developing in the first place The confidence and skills to help patients suffering from persistent pain of whatever cause – no need to feel ‘heart-sink’ with some patients anymore An understanding of what is going on when pain persists – and what you can do about it How to reduce the risk of chronic pain developing – prevention is better than cure – and identify the factors that make it likely A range of psychological chronic pain management techniques to use with your patients or yourself The importance of the bio-psycho-social model in reducing pain and accelerating healing How to produce significant pain relief by changing the way people think about their pain – in minutes An understanding of the value of pain displacement and how to use the brain’s ‘reality simulator’ What the latest neuroscience tell us about the experience of pain How to use guided imagery, relaxation and distraction to promote chronic pain relief How to deal with constant pain and promote healing How healthcare professionals can make their consultations more therapeutic How to avoid labelling patients’ pain as ‘purely psychological’ The many myths about pain – and why some well-intentioned pain management techniques don’t work and more… No prior medical knowledge is needed for you to benefit from the day. Course Programme The ‘Effective Pain Management’ live online course starts at 9.15am and runs until 4.00pm. (GMT). 9.15am Join the Zoom meeting 9.30am Understanding pain 11.00am Comfort break and discussion 11.30am Assessing a person with persistent pain 1.00pm Lunch break 1.45pm Psychological & Behavioural treatment interventions 2.45pm Comfort break and discussion 3.00pm Practical demonstration of interventions 4.00pm Day ends Who is this course suitable for? This course is designed to enhance the skills and knowledge of health care professionals of any discipline who work on a regular or occasional basis with people in pain to improve outcomes, including: • doctors • surgeons • nurses • dentists • neurologists • osteopaths • chiropractors • palliative care workers • psychiatrists • midwives • physiotherapists • occupational therapists • psychologists • health visitors • support/care workers • psychotherapists • counsellors – it is perfect CPD If you personally experience persistent pain then you will gain much from the workshop but please be aware the programme is not designed to be a treatment day and the tutor will be unable to give opinions to individuals with pain problems unless (with consent) their problem can be discussed for the benefit of all participants Anyone who would like to understand more about their own experience of pain, or that of someone they care for, and what can be done to manage ongoing pain and alleviate suffering This course has been independently assessed by the internationally recognised CPD Standards Office for 6 hours of CPD training. On completion of this training you’ll receive CPD certificates from the College and the CPD Standards Office.

The “ISO 42001:2023 Lead Auditor Course” integrates the principles of ISO 42001:2023, the International Standard for Artificial Intelligence Management, with the methodologies outlined in ISO 19011:2018, the Guidelines for Auditing Management Systems. The course equips participants with the skills and knowledge required to lead Artificial Intelligence audits effectively, ensuring compliance with ISO 42001:2023, and applies the principles of ISO 17011:2017 for conformity assessment bodies.

Why choose AutoCAD Basic-Intermediate Training Courses 1 on 1? Course info. Designed for absolute beginners, this practical and interactive course offers comprehensive AutoCAD1-2-1 training, enabling participants to create 2D plans and elevations proficiently. "Call 02077202581 or WhatsApp 07970325184 to reserve your preferred dates and times. Duration: 10 hrs. Method: 1-2-1, Personalized attention. Schedule: Tailor your own schedule available from Mon to Sat between 9 am and 7 pm. Upon completion, you'll confidently navigate various AutoCAD features. Comprehensive beginners' course covering basics. Personalized attention, ample room for inquiries. Accomplished trainers, one-to-one sessions. All-inclusive course materials provided. Lifetime email support post-training. Gain the ability to: Effectively use AutoCAD features. Create, edit, manipulate plans and drawings. Utilize layers, templates, and dimensions efficiently. No prior AutoCAD experience needed. Basic computer skills are required. You'll receive a detailed PDF manual, free AutoCAD Blocks, and a Certificate of Attendance. AutoCAD Basic to Intermediate Training Course: Session 1: 1. Introduction to AutoCAD Interface, Commands, and Tools - Familiarization with the AutoCAD user interface on Mac - Overview of essential commands and tools 2. Creating and Managing Drawings - Starting a new drawing and setting up units - Saving, opening, and managing drawing files 3. Drawing Basic Shapes and Objects - Drawing lines, circles, arcs, rectangles, ellipses, and other basic shapes - Exploring the creation of precise geometries 4. Basic Modification Techniques - Erasing unwanted objects - Moving objects to new locations - Rotating objects to specific angles - Scaling objects uniformly Session 2: 5. Working with Layers and Properties - Creating layers and organizing objects - Assigning properties to objects based on layers 6. Creating and Modifying Text and Dimensions - Adding text annotations to the drawing - Inserting and customizing dimensions for accurate measurements 7. Introduction to Blocks and Attributes - Understanding the concept of blocks and their benefits - Adding attributes to blocks for dynamic data input Session 3: 8. Advanced Object Modification Techniques - Using fillet and chamfer to create smooth transitions - Trimming and extending objects to desired endpoints 9. Using Grips to Modify Objects - Leveraging grips for easy and intuitive object editing 10. Creating and Modifying Polylines and Splines - Drawing and editing complex shapes using polylines and splines Session 4: 11. Creating and Editing Tables - Generating tables to organize and present data - Modifying table content and appearance 12. Creating and Working with Layouts and Viewports - Setting up layout sheets for plotting and printing - Managing multiple viewports to display different parts of the drawing 13. Printing and Exporting Drawings - Configuring printing options and settings for output - Exporting drawings in different file formats Throughout the course, participants will actively engage in hands-on exercises and projects to practice their skills and reinforce their understanding of AutoCAD 2D for Mac. The training will also provide ample time for Q&A and troubleshooting to address specific concerns and challenges. Download AutoCAD 2024 | AutoCAD Free Trial Autodesk https://www.autodesk.co.uk › products › free-trial Download a free 30-day trial of AutoCAD or any of the toolsets that are included when you subscribe. Note: each trial must be downloaded separately.

Osteopathic palpation of the involuntary mechanism and paediatric/developmental anatomy of the cranium, membranous/fascial & fluid systems Course Title: OCC Access Course Dates: 14, 15 and 22 September 2024 (minimum 6 contact hours per day) Location: OCC, Canopi Building 7 - 14 Great Dover Street, London, SE1 4YR Osteopaths studying on our postgraduate courses need to have acquired hands-on skills beyond their undergraduate training. Our Access Course provides tailored training to introduce & nurture palpation of the involuntary mechanism and paediatric/developmental anatomy of the cranium, membranous/fascial & fluid systems to prepare less experienced osteopaths for further paediatric training. Our experienced faculty will deliver this 3-day course, which enables osteopaths to reach the required standard for entry onto the OCC courses and does not limit our osteopaths to any one technical style. These days can also be useful to osteopaths who want to refresh or enhance previously acquired skills & can be attended as individual days if space permits. Course Content: Day 1 - Saturday 14th September – Vault & base osteology, applied anatomy & motion – RTM & venous sinuses – Sacral /pelvic anatomy & motion Day 2 - Sunday 15th September – SBS patterns, theory & palpation – Fascia – Fluid – CNS Day 3 - Sunday 22nd September – Viscerocranium anatomy, osteology & motion – Principles of treatment – Intra oral techniques – Condylar parts osteology, applied anatomy & treatment All 3 days will be delivered in small groups to facilitate individual learning and needs. Most of the teaching will take place at the tables with very little lecture material & will include demonstrations interwoven with appropriate practical sessions. This is designed to deliver theory but in a very practical hands-on way. In order to provide this level of supervision numbers will be limited, and places are allocated on a ‘first come first served’ basis. For more info call 0208 875 5291 or email educationregistrar@occ.uk.com Cancellation Policy The OCC/FPO reserves the right to postpone this course if circumstances change. Eventbrite’s processing fee is non-refundable, so in the event that the course is cancelled by the OCC/FPO, all fees (excluding Eventbrite’s fee) will be refunded. Should circumstances mean that you have to cancel your place on this course, the OCC/FPO regrets to inform that no refunds can be given unless we are able to re-sell your place. Please note, the OCC/FPO does not accept responsibility for any expense you incur (such as travel and accommodation costs), so please do consider this before registration. occ.uk.com/continuing-professional-development The Osteopathic Centre for Children is the clinical arm of the Foundation for Paediatric Osteopathy. Registered Charity: 1003934

Maya face to face training customised and bespoke.

This is the follow on course for those who want complete knowledge of all Beauty Therapy. Students will need to have completed their NVQ Level 2 in order to progress to this level. This is the perfect course for being able to offer any treatment you require. You can choose from 25 evening or a 'Fast Track' of ONLY 10 Days plus coursework, case studies and homework. This course is accredited by the VTCT and recognised by the HABIA- Hair and Beauty regulated government standards. Although our Tutors have been teaching NVQ levels at many Colleges for over 15 years now, we started the 'Academy' so that the teaching revolved around the student and not around making targets, politics and college protocols! Although we set dates, our students have an opportunity to pick and choose and to the best of our ability, we will structure special dates around them. This is what makes us completely unique and probably why we are the most features teaching school on a multitude of TV Channels!! There are many Colleges and Schools that can teach you but whatever you do, even if you do not choose us to learn with us, please make sure the school has 100% pass rate as some of the biggest private schools only have between 50-75% pass rates!! You will need to BOOK SOON TO AVOID DISAPPOINTMENT!! Here at 'The Angel Academy of Teaching and Training', we have 2 different routes of NVQ Level 3: Here are the two NVQ Level 3 options: NVQ Level 3 Massage Route: Swedish Body Massage This unit will teach a variety of massage moves which can be used effectively on paying clients to help them maintain good health. Performed on massage couches, each student will receive guidance on how to effectively use massage moves on different parts of the body. Instruction will be given in order for a student to effectively perform a 60 minute massage routine. The Course will teach the following: Client Consultation Contra-indications and contra-actions Health and Safety in the workplace Related Anatomy and Physiology Massage moves to include, effleurage, petrissage, percussion and tapotement Correct application of oil and correct pressure application After-care Indian Head Massage Indian Head Massage traditionally was an ancient healing process known to relieve headaches, stress and tension. Hair was strengthened and conditioned too with the use of certain oils. Today, the fashionable hair salons provide the use of Indian Head Massage as a means of relaxation, and it ' s popularity is increasing rapidly. On-Site practitioners now visit offices to provide treatments, bringing Indian Head Massage into our working day. In fact, Indian Head Massage is more than a massage, it is an overall healing therapy which involves chakra, colour and crystal therapy. Essential oils can be added to the scalp by a trained aromatherapist to induce a real state of well-being. Benefits of becoming certified at Indian Head Massage: Take Indian Head Massage to the employees in the large corporations Incorporate it as an extra into existing treatments to give you 'the edge' Many customers prefer to keep their clothes on Very little workspace is needed. Just a chair! Pre-Blended Aromatherapy This unit is designed to give you an insight into aromatherapy oils. Enjoy discovering the therapeutic and relaxing effects of acupressure massage using pre-blended essentials oils The course will teach the following: The benefits of using pre-blended oils Shiatsu massage Pressure points Oils and their benefits Health and Safety Related Anatomy and Physiology Client Consultation and Contra-indications After-Care Hot Stone Treatment Hot Stone Massage is an ancient treatment which involves both the Placement Of Stones and the Application and Massage using them. They are a brilliant aid for the Therapist to work deeply on a client without any trauma to their hands. One stone massage stroke is equivalent to 10 normal massage strokes. The physical and spiritual well-being induced by the stones is amazing. The treatment is a lovely one to give that brings immediate benefits. Aches and Pains Swollen Muscle and Joint Pains Aids Blood Circulation Stimulates the Lymphatic system to eliminate waste It can help relieve pain Improve Bodily Functions Helps to maintain health and well-being Your extra unit is: Facial Electrical Treatments This course is becoming more popular than ever before due to the amazing electrical equipment now available at reasonable prices for salons and therapist. Microdermabrasion Micro-Current Galvanic- Iontopheresis and Desincrustation Faradic- Electrical Muscle Stimulation Micro-Lance Direct and In-direct High Frequency Realated Anatomy Health and Safety Client Consultation and Contra-indications Related Anatomy & Physiology To enable students to identify all bodily systems relating to Anatomy and Physiology, allowing them to apply their knowledge and understanding into their therapeutic working life. The course will teach the following: Cells and Tissues The Skeletal System The Integumentary System The Blood Lymph Systems The Muscular System Neurology The Digestive and Excretory Systems The Respiratory and Olfactory Systems The Endocrine and Reproductive Systems Arthrology Health and Safety Issues Hygiene in the Workplace NVQ Level 3 General Route: Body Electrical Treatments This course is becoming more popular than ever before due to the amazing electrical equipment now available at reasonable prices for salons and therapist. An Electrical body treatment can postpone early signs of ageing, improve the appearance of the skin and erase minor sun damage, scarring, pigmentation, cellulite and 'Orange Peel' creping. The course will teach the following: Microdermabrasion Micro-Current Galvanic- Iontopheresis and Desincrustation Faradic- Electrical Muscle Stimulation Direct and In-direct High Frequency Related Anatomy & Physiology Health and Safety Client Consultation and Contra-indications Facial Electrical Treatments This course is becoming more popular than ever before due to the amazing electrical equipment now available at reasonable prices for salons and therapist. An Electrical facial treatment can postpone early signs of ageing, improve the appearance of the skin and erase minor sun damage, scarring and pigmentation. The course will teach the following: Microdermabrasion Micro-Current Galvanic- Iontopheresis and Desincrustation Faradic- Electrical Muscle Stimulation Micro-Lance Direct and In-direct High Frequency Related Anatomy & Physiology Health and Safety Client Consultation and Contra-indications Swedish Body Massage This unit will teach a variety of massage moves which can be used effectively on paying clients to help them maintain good health. Performed on massage couches, each student will receive guidance on how to effectively use massage moves on different parts of the body. Instruction will be given in order for a student to effectively perform a 60 minute massage routine. The course will teach the following: Client Consultation Contra-indications and contra-actions Health and Safety in the workplace Related Anatomy and Physiology Massage moves to include, effleurage, petrissage, percussion and tapotement Correct application of oil and correct pressure application After-care Electrical Epilation Electrolysis gives you the skills necessary for a treatment to remove unwanted hair, using alternating current and blend techniques. Individual hairs can be treated effectively and safely. The course will teach the following: Be able to safely carry out an electrical epilation treatment on most areas of the body Understand how to correctly work to remove unwanted hair Related Anatomy and Physiology Preparation of the work area Health and Safety Client Consultation and Contra-indications After-Care Your extra unit is: Hot Stone Treatment Hot Stone Massage is an ancient treatment which involves both the Placement Of Stones and the Application and Massage using them. They are a brilliant aid for the Therapist to work deeply on a client without any trauma to their hands. One stone massage stroke is equivalent to 10 normal massage strokes. The physical and spiritual well-being induced by the stones is amazing. The treatment is a lovely one to give that brings immediate benefits. Aches and Pains Swollen Muscle and Joint Pains Aids Blood Circulation Stimulates the Lymphatic system to eliminate waste It can help relieve pain Improve Bodily Functions Helps to maintain health and well-being Related Anatomy & Physiology To enable students to identify all bodily systems relating to Anatomy and Physiology, allowing them to apply their knowledge and understanding into their therapeutic working life. The course will teach the following: Cells and Tissues The Skeletal System The Integumentary System The Blood Lymph Systems The Muscular System Neurology The Digestive and Excretory Systems The Respiratory and Olfactory Systems The Endocrine and Reproductive Systems Arthrology Health and Safety Issues Hygiene in the Workplace IF YOU REQUIRE ANY FURTHER INFORMATION CHECK OUT OUR PROSPECTUS, CALL US, ASK A QUESTION ONLINE AND PAY YOUR DEPOSIT NOW TO AVOID DISAPPOINTMENT! Dates and Costs Please see below our list of upcoming courses. Click on the course for further information, request a call or email regarding the course or book now! We are quite flexible in terms of course dates so if you would like to organise a course around your timetable, please contact us! Course Days Dates Cost NVQ Level 3 ** FAST TRACK OPTION ** 14 OPEN OPEN £2499 NVQ Level 3 ** FAST TRACK OPTION ** 14 2/10/2023 15/10/2023 £2499 NVQ Level 3 ** FAST TRACK OPTION 14 12/11/2023 25/11/2023 £2499 NVQ Level 3 ** FAST TRACK OPTION 14 8/12/2023 21/12/2023 £2499 NVQ Level 3 ** FAST TRACK OPTION 14 1/01/2024 14/01/2024 £2499 NVQ Level 3 ** FAST TRACK OPTION 14 15/02/2024 28/02/2024 £2499 NVQ Level 3 ** FAST TRACK OPTION 14 2/03/2024 16/03/2024 £2499

This IRATA rope access course is for candidates who already have an IRATA Level 1 qualification, plus 1,000 hours of work on ropes, one year of experience from your previous Level 1 assessment and a Level 1 certificate that is still in date.