421 Courses in London

A47 Piling Rig - Bored below 20 Tonnes

This course provides participants with a comprehensive understanding of the requirements of the CDM Regulations 2015 and how these should be implemented in practice. The Regulations are put in context with other key health and safety legislation. The programme sets out clearly the roles and responsibilities of the principal duty holders and explores with the participants how these roles may vary on different types of project and procurement routes. The programme examines the content and appropriate level of information that should be included in the Pre-Construction Information and the Construction Phase Plan. The trainer will discuss best practice in implementing CDM through the new 2015 Regulations and Guidance. This course is essential for anyone who is involved in the procurement, planning, design or implementation of construction work. The course will provide you with: An overview of construction health and safety law, liability and enforcement A detailed understanding of the 2015 CDM Regulations and the part they play with other key legislation An explanation of the roles and responsibilities of all duty holders and the requirements for the CDM documentation Clear advice on current best practice for complying with the principles of the CDM Regulations and the changes introduced by the 2015 Regulations An understanding of how risk assessment should be applied practically throughout the design and how this responsibility is then transferred to contractors 1 Introduction Why manage health and safety? The costs of accidents Construction industry statistics Why CDM? Health and safety culture in the construction industry 2 Overview of health and safety law and liabilities Criminal and civil law Liability Enforcement and prosecution Compliance - how far do we go? Statutory duties 3 Health and safety law in construction Framework of relevant legislation Health and Safety at Work etc Act 1974 Management of Health and Safety at Work Regulations 1999 Construction (Design and Management) Regulations 2015 Who is responsible for the risks created by construction work? Shared workplaces/shared responsibilities Control of contractors - importance of contract law 4 Construction (Design and Management) Regulations 2015 Scope - What is construction? Application - When do they apply? The CDM Management System Duty holders (Client, Domestic Client, Designer, Principal Designer, Principal Contractor, Contractor) Documents (HSE Notification, Pre-Construction Information, Construction Phase Health & Safety Plan, H&S File) Management process The 2015 Guidance 5 Best practice - key issues in the CDM process The client and client management arrangements Competence and resource under CDM 2015 The role of the Principal Designer in practice Design risk assessment and the role of the Designer The CDM Documents (PCI, PCI Pack, Plan and File) Construction health, safety and welfare Making CDM work in practice 6 Questions, discussion and review

This course provides participants with a comprehensive understanding of the requirements of the CDM Regulations 2015 and how these should be implemented in practice. The Regulations are put in context with other key health and safety legislation. The programme sets out clearly the roles and responsibilities of the principal duty holders and explores with the participants how these roles may vary on different types of project and procurement routes. The programme examines the content and appropriate level of information that should be included in the Pre-Construction Information and the Construction Phase Plan. The trainer will discuss best practice in implementing CDM through the new 2015 Regulations and Guidance. This course is essential for anyone who is involved in the procurement, planning, design or implementation of construction work. The course will provide you with: An overview of construction health and safety law, liability and enforcement A detailed understanding of the 2015 CDM Regulations and the part they play with other key legislation An explanation of the roles and responsibilities of all duty holders and the requirements for the CDM documentation Clear advice on current best practice for complying with the principles of the CDM Regulations and the changes introduced by the 2015 Regulations An understanding of how risk assessment should be applied practically throughout the design and how this responsibility is then transferred to contractors 1 Introduction Why manage health and safety? The costs of accidents Construction industry statistics Why CDM? Health and safety culture in the construction industry 2 Overview of health and safety law and liabilities Criminal and civil law Liability Enforcement and prosecution Compliance - how far do we go? Statutory duties 3 Health and safety law in construction Framework of relevant legislation Health and Safety at Work etc Act 1974 Management of Health and Safety at Work Regulations 1999 Construction (Design and Management) Regulations 2015 Who is responsible for the risks created by construction work? Shared workplaces/shared responsibilities Control of contractors - importance of contract law 4 Construction (Design and Management) Regulations 2015 Scope - What is construction? Application - When do they apply? The CDM Management System Duty holders (Client, Domestic Client, Designer, Principal Designer, Principal Contractor, Contractor) Documents (HSE Notification, Pre-Construction Information, Construction Phase Health & Safety Plan, H&S File) Management process The 2015 Guidance 5 Best practice - key issues in the CDM process The client and client management arrangements Competence and resource under CDM 2015 The role of the Principal Designer in practice Design risk assessment and the role of the Designer The CDM Documents (PCI, PCI Pack, Plan and File) Construction health, safety and welfare Making CDM work in practice 6 Questions, discussion and review

The NVQ Level 3 Diploma in Insulation and Building Treatments provides a nationally recognised qualification for those working in the construction and the built environment sector and specialise in one or more of the following categories: External Wall Insulation Room in the Roof Park Homes Hybrid Wall Insulations Insulating Framed Sections The qualification modules will be discussed and agreed upon with each individual candidate to ensure that the qualification will be suited to your job role and will be achievable in order to demonstrate their competence and become eligible for the Gold CSCS Card. Each candidate will be allocated a designated and qualified assessor to provide support throughout the qualification and provide information, advice and guidance to candidates in order that they can achieve the qualification. If you require further information or are looking to undertake this qualification, please contact us. CSCS Cards Candidates can undertake the CSCS test and obtain the red (Provisional) CSCS card on signing up for various qualifications. The red card can usually be obtained within 7 to 14 days and can be used to access the construction sites for a period of 12 months. On completion of the qualification, you will receive a full advanced craft, 5 year, CSCS card.

The NVQ Level 3 NVQ Diploma in Occupational Work Supervision is appropriate for individuals who supervise others in a construction area and are looking to become eligible for the Gold CSCS Card. The qualification modules will be discussed and agreed upon with each individual candidate to ensure that the qualification will be suited to your job role. Each candidate will be allocated a designated and qualified assessor to provide support throughout the qualification and provide information, advice and guidance to candidates in order that they can achieve the qualification. If you require further information or are looking to undertake this qualification, please contact us. CSCS Cards Candidates can undertake the CSCS test and obtain the red (Provisional) CSCS card on signing up for various qualifications. The red card can usually be obtained within 7 to 14 days and can be used to access the construction sites for a period of 12 months. On completion of the qualification candidates can upgrade or renew their CSCS Card to the full 5 year card.

CPCS A44 Concrete Pump Trailer Mounted

The NVQ Level 2 Diploma in Steelfixing Operations is appropriate for individuals aged 16 and over working in the construction sector who specialise in Steelfixing and are looking to become eligible for the Blue CSCS Card. Our team will discuss the qualification process with you prior to signing up in order to ensure that you will be able to complete the qualification. The aim of this qualification is to recognise the knowledge, skills and competence of individuals who specialise in Steelfixing in the construction industry. Upon completion of the qualification, you will be awarded the NVQ Level 2 Diploma in Steelfixing Operations. CSCS Cards We can provide CSCS tests and CSCS cards alongside your qualification without the need to attend the test centre. Speak to our friendly and helpful team for more information.

This fashion design 2-DAY course for beginners and intermediates is a group class aimed to support aspiring designers or designers in need of guidance in the realisation of a viable and realistic collection of bags and/or accessories.This course enables you to understand essential skills required to become a fashion bag designer ans well as guiding you through the steps necessary for designing, developing, prototyping and manufacturing your collection.   WHY THIS IS NOT THE USUAL ‘ACCESSORY DESIGN’ COURSEThis course is designed by a team of designers, prototype makers and handbag manufacturers.It is both a theoretical and practical course which will teach you what the industry requires from designers in order to be able to understand and correctly translate their ideas into finished products.This course is focused on giving you an overview on the complexity and extensiveness of the process that designing a collection of handbags requires.The course will assist you in understanding the prerequisites before and during the design of your styles. This knowledge will enable you to circumvent a lengthy, costly, and occasionally frustrating process when it comes time to prototype and manufacture your collection.   WHY WE CREATED A FASHION DESIGN COURSEAfter years of experience in designing and developing collections for our customers, we realised that there was a substantial lack of clear information available about what designing a collection of handbags and fashion accessories truly requires and how it is achieved.We created this course with the aim of helping the new generation of designers, as well as designers which are still struggling, in developing their ideas and empower them to clearly and correctly communicate them to whoever is going to prototype their collection.We essentially have created this tuition based on the needs and problems of our customers, hoping to promote and facilitate creatives in the realisation of their projects.   WHO IS THIS COURSE FOR?This course is designed for aspiring designers and professionals seeking expert advice from the industry. It caters to those in need of guidance to optimise their design process or understand the nuances of working as a fashion accessory designer.No previous experience is required.   WHAT WILL BE TAUGHT?The designing classes cover various topics, including: - Preliminary considerations before designingUnderstanding the concept and use of a moodboard - Overview of researching crucial aspects like target audience, market placement, pricing strategy, etc - Overview on leather and hardware and their impact on costImportance of construction and finishing optionsAnatomy of a handbag, including lining and reinforcements - Understanding how to structure a collection with a collection planPlanning a balanced collection of fashion accessories - Differences and purposes of illustrations vs technical drawingsSketching techniques, including drawing in perspective and technical drawings - Product development for a specific design - Understanding what technical information the prototype maker requires - Overview of the prototyping processOverview of manufacturing options and processes for your collection HOW WILL THE ABOVE BE TAUGHT:The class will take place in person at our London studio and the lesson will alternate between theoretical lessons and practical exercises.   INCLUDED IN THE COURSE:You will also receive access to a collection of handouts providing relevant information, useful resources and support in continuing your designing process independently.The handouts will contain: – A glossary containing essential key words related to the topic of the lesson – An illustrated glossary containing information about type of bags and bags’ features – An illustrated guide on common hardware used in bags and accessories – Documents about leather types, finishings, tanning processes – Information about perspective and guides to be used as reference to develop your drawings – A list of recommended suppliers for both leather and fittings (physically in London and online) – A glossary containing information about leather types and characteristics WHAT ARE THE ENTRY REQUIREMENTS? You should be able to use measurements and understand verbal and written English instructions.   ARE THERE ANY OTHER COSTS? IS THERE ANYTHING I NEED TO BRING?Materials to exercise with are included.Feel free to bring a notepad, if you would like to take some notes, we will provide the rest. HOW LONG IS THIS TUITION?:This tuition will require up to 14 hours to complete.We aim to provide customised and high-quality tuition services and by only allowing max 6 students at a time, we are able to focus on each person needs and interests. As every student has a different level of ability and previous experience, this course might lead some students to complete the core aspects of the lesson in a shorter time frame than others. Students who complete the course early will be welcome to stay and use the studio facilities to exercise on the topics of the lesson.

The Level 2 NVQ Diploma in Cladding Operations is appropriate for individuals aged 16 and over working in the construction sector who specialise in Cladding and are looking to become eligible for the Blue CSCS Card. Our team will discuss the qualification process with you prior to signing up in order to ensure that you will be able to complete the qualification. Complete the qualification within a few short weeks providing that you work with your assessor to provide the required evidence. Qualification times can be as little as 4 to 8 weeks! The aim of this qualification is to recognise the knowledge, skills and competence of individuals who specialise in Cladding in the construction industry. CSCS Cards We can provide CSCS tests and CSCS Cards alongside the qualifications without the need to attend the test centre. Speak with our friendly and helpful team for more information.

Level 2 NVQ Certificate in Plant Operations - Fork Lift Trucks