97 Courses in Liverpool

This course provides participants with a comprehensive understanding of the requirements of the CDM Regulations 2015 and how these should be implemented in practice. The Regulations are put in context with other key health and safety legislation. The programme sets out clearly the roles and responsibilities of the principal duty holders and explores with the participants how these roles may vary on different types of project and procurement routes. The programme examines the content and appropriate level of information that should be included in the Pre-Construction Information and the Construction Phase Plan. The trainer will discuss best practice in implementing CDM through the new 2015 Regulations and Guidance. This course is essential for anyone who is involved in the procurement, planning, design or implementation of construction work. The course will provide you with: An overview of construction health and safety law, liability and enforcement A detailed understanding of the 2015 CDM Regulations and the part they play with other key legislation An explanation of the roles and responsibilities of all duty holders and the requirements for the CDM documentation Clear advice on current best practice for complying with the principles of the CDM Regulations and the changes introduced by the 2015 Regulations An understanding of how risk assessment should be applied practically throughout the design and how this responsibility is then transferred to contractors 1 Introduction Why manage health and safety? The costs of accidents Construction industry statistics Why CDM? Health and safety culture in the construction industry 2 Overview of health and safety law and liabilities Criminal and civil law Liability Enforcement and prosecution Compliance - how far do we go? Statutory duties 3 Health and safety law in construction Framework of relevant legislation Health and Safety at Work etc Act 1974 Management of Health and Safety at Work Regulations 1999 Construction (Design and Management) Regulations 2015 Who is responsible for the risks created by construction work? Shared workplaces/shared responsibilities Control of contractors - importance of contract law 4 Construction (Design and Management) Regulations 2015 Scope - What is construction? Application - When do they apply? The CDM Management System Duty holders (Client, Domestic Client, Designer, Principal Designer, Principal Contractor, Contractor) Documents (HSE Notification, Pre-Construction Information, Construction Phase Health & Safety Plan, H&S File) Management process The 2015 Guidance 5 Best practice - key issues in the CDM process The client and client management arrangements Competence and resource under CDM 2015 The role of the Principal Designer in practice Design risk assessment and the role of the Designer The CDM Documents (PCI, PCI Pack, Plan and File) Construction health, safety and welfare Making CDM work in practice 6 Questions, discussion and review

Our first aid at work training courses are in accordance with guidance provided by the Health & Safety executive (HSE) and are both fun and informative. This qualification should enable Learners to attain the knowledge and practical competencies needed to deal with a range of emergency first aid situations. Learners should be able to demonstrate the practical administration of safe, prompt, effective first aid in emergency situations with an understanding of the role of first aider. and include dynamic and realistic casualty simulation which puts the candidates through their paces. We hold the Emergency First Aid at Work at our Education Centre in Ellesmere Port. We are also able to teach this course 'in-house' at our clients preferred site. Learners must be at least 14 years old on the first day of training and be able to perform tasks at floor level. There are no other formal entry requirements but we strongly recommend that Learners have a minimum of Level 1 in literacy and numeracy or equivalent.

This workshop has been designed to help managers understand their responsibilities and what they need to do to ensure compliance with current workplace legislation - including the fire safety and CDM regulations. The day will cover the legal background - including an appreciation of how safety legislation has evolved and why; the logic behind recent developments and the implications for staff and employers; key areas of current legislation; roles and responsibilities in health and safety management, including monitoring contractors and suppliers effectively; implementing sound health and safety policies and procedures; getting staff on board, and implementing effective systems. Also, recognising potential risks and hazards and developing strategies to minimise their impact in the workplace. This course will give participants an understanding of: The broader context of the key areas of health and safety regulation which apply to your organisation Existing health and safety practice and guide them in how to shape and implement an effective health and safety policy What they should do and the procedures to support it Potential areas of risk in the workplace - and how to take action to minimise the threat to staff safety How sound health and safety processes can contribute to business performance 1 Understanding the workplace legislation Overview of health and safety and workplace legislation Compliance, the role of the facilities manager, and who is accountable? Breakout session to discuss where we are now and to highlight issues of concern Applying required policies and procedures Developing and implementation/review of the safety policy Communicating with users, clients and contractors Health and safety manual 'Selling' health and safety 2 Key legislation - a practical working guide Asbestos Regulations Construction (Design and Management) Regulations 2007 / 2015 Control of Substances Hazardous to Health (COSHH) Regulations Disability Discrimination Act (DDA) Display Screen Equipment (DSE) Regulations 1992 Electricity at Work Regulations 1989 Fire Precautions (Workplace ) Regulations 2006 Health and Safety (Consultation with Employees) Regulations 1996 Health and Safety (First Aid) Regulations 1981 Health and Safety at Work etc. Act 1974 Management of Health and Safety at Work Regulations 1992 Manual Handling Operations Regulations 1992 Portable Appliance Testing (PAT) Provision and Use of Work Equipment Regulations 1992 REACH - Registration, Evaluation, Authorisation and restriction of Chemicals Reporting of Injuries, Diseases, and Dangerous Occurrences Regulations (RIDDOR) 1995 Waste Electrical and Electronic Equipment (WEEE) Regulations 2006 Work Equipment Regulations 3 Controlling contractors Understanding the Regulations Selecting and assessing contractors Understanding and setting accountability Why a method statement? How to apply a permit to work system Safe systems of work Round-table discussion to bring out issues from participants' own experience 4 Risk assessment Understanding your hazards Identifying specialist areas How to undertake these assessments Implementation of sound systems and processes Syndicate exercise identifying where assessments are needed and carrying out assessments 5 Keeping the work environment safe Sick building syndrome and legionella Asbestos Waste management Pest control Provisions for first aid Accident reporting and investigation At-work driver safety Security 6 Fire safety Understanding the Regulatory Reform Fire Safety Order Fire certificates The fire risk assessment Testing fire-fighting equipment? Emergency procedures Workshop to examine the procedures for dealing with different types of emergencies 7 Ergonomics programme Ergonomics - important or irrelevant? Are you complying with HSE regulations? Furniture and equipment Display screen equipment assessments Homeworking - your concern or not? Syndicate exercise to review what to do when relocating or refurbishing an office 8 Inspecting and auditing Role of Health and Safety Executive Inspectors - 'be prepared' FM role Staff/trade union involvement Independent audits Records and reports Communicating the results 9 Action plan Participants to list actions they need to take after the course

This market-leading health and safety course enables companies to demonstrate compliance and embed health and safety into the company culture. Whilst anyone can attend, it is particularly beneficial for line managers, team leaders and supervisors. It is tried, tested and trusted.

This CITB HSA course highlights potential hazards when on a construction site.

This course is designed to help give you a sound understanding of the role and benefits of well...

The Level 3 Award in Emergency First Aid at Work (RQF) is a regulated and nationally recognised qualification, specifically designed for those wishing to act as an emergency first aider in their workplace. Throughout this 1 day course, learners will develop the skills and knowledge needed to deal with a range of emergency first aid situations, including administering CPR, using a defibrillator, dealing with wounds and bleeding, minor injuries and more.

The aim of this course is to give delegates who have to use full working breathing apparatus during their working activities a greater understanding of correct operational procedures. Book via our website @ ESS | Training Courses | Vp ESS (vp-ess.com) or via email at: esstrainingsales@vpplc.com or phone on: 0800 000 346

Expert consultant to conduct Fire Risk Assessment of site/ workplace/ relevant building

Instructor training enables companies to have their own AITT Forklift Instructor. On completion they are able to instruct and examine operators on company premises. Also it could be an opportunity for an individual to embark upon a rewarding career as a recognised AITT instructor. The course complies with the approved code of practice issued by the Health & Safety Executive. We offer the AITT Instructor training course at our training centre in Warrington, Cheshire. We use all the best tools and equipment to assist trainee development. Our Instructor’s Mike Hammett and Stephen McCann have a lot of experience in this course, both have very good success rates and offer alot of after care too! Once an Instructor has passed their AITT Instructor training course they can always come back and receive professional advice. We always go the extra mile! AITT Accredited Novice Course: The Instructor training course caters for candidates seeking to become an AITT Registered Instructor. Previous fork lift experience is strongly recommended and candidates must have a current counterbalance certificate dated within 36 months prior to the course start date. Refresher courses are available prior to the instructor course extending the duration by one day to 11 days. Objectives: On successful completion of the course the candidate will be qualified to teach and train on all Industrial Counterbalance and Reach trucks for which they are certificated to use as operators. Target Group: The employer should carefully select the correct person for the job as an instructor. They should be literate and numerate with good presentation skills. The AITT recommend that candidates have a minimum of 12 months operating experience before attending the course. During the course candidates will be progressively assessed in all key areas. Candidates therefore must have a good knowledge of each subject and are provided with some excellent materials to assist them on completion of the course. AITT Instructor Training Course Duration: 3 or 5 days for Re-qualification or Re-Registration courses. 5 days for Assimilation Courses. 10-12 days for the Novice AITT instructor training course. Contents: Principles of instruction. Instructional techniques. HASAWA 1974/PUWER 1998/LOLER 1998/L117. Setting up courses. Administering the tests etc. All original documentation supplied by examining body and HSE. Prices are available on request and should you require any further information please do not hesitate to contact us. We also offer In-House Instructor training to suit companies needs and these are of five day durations, please contact for further details. Please feel free to download our Course Syllabus’s below and decide which course best meets your needs. See Mike at work demonstrating a lesson of De-stacking from High Level. In-House Courses: These courses are aimed at companies wishing to use their own Instructors to train staff. IN-HOUSE BASIC INSTRUCTOR COURSE PDF AITT Instructor Training Courses: On completion of these courses candidates will be registered as an AITT Instructor and be able to train on anything they are currently qualified to operate. Courses vary depending on experience and current qualifications so please have a look at the following courses to see which suits best. More information is available at www.aitt.co.uk.