Nottinghamshire

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate 360 excavator for lifting operations.The NPORS Excavator 360 qualification is required to gain the bolt on unit.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as an operator</li><li fr-original-style="" style="box-sizing: border-box;">Conform to manufacturers requirements as per technical data, conform to relevant regulations and legislation</li><li fr-original-style="" style="box-sizing: border-box;">Locate, identify and explain safe working loads, lifting capacity charts and explain different lifting configurations and working ranges</li><li fr-original-style="" style="box-sizing: border-box;">Identify and explain different lifting procedures and explain what task could fall into each category</li><li fr-original-style="" style="box-sizing: border-box;">Identify and explain centres of gravity and calculate estimated weights of loads</li><li fr-original-style="" style="box-sizing: border-box;">Identify any overhead/proximity hazards</li><li fr-original-style="" style="box-sizing: border-box;">Agree the signal codes/hand signals, direction of movement, safe working and safe landing and placement zone with the slinger/signaller</li><li fr-original-style="" style="box-sizing: border-box;">Ensure the excavator is in a safe condition for attachments to be fitted</li><li fr-original-style="" style="box-sizing: border-box;">Check load integrity and security by carrying out trial lifts</li><li fr-original-style="" style="box-sizing: border-box;">Lift and move a load to a designated position in a safe and controlled manner ensuring minimum uncontrolled movement</li><li fr-original-style="" style="box-sizing: border-box;">Understand environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all out of service and securing procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate 360 excavator for lifting operations.
The NPORS Excavator 360 qualification is required to gain the bolt on unit.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as an operator
Conform to manufacturers requirements as per technical data, conform to relevant regulations and legislation
Locate, identify and explain safe working loads, lifting capacity charts and explain different lifting configurations and working ranges
Identify and explain different lifting procedures and explain what task could fall into each category
Identify and explain centres of gravity and calculate estimated weights of loads
Identify any overhead/proximity hazards
Agree the signal codes/hand signals, direction of movement, safe working and safe landing and placement zone with the slinger/signaller
Ensure the excavator is in a safe condition for attachments to be fitted
Check load integrity and security by carrying out trial lifts
Lift and move a load to a designated position in a safe and controlled manner ensuring minimum uncontrolled movement
Understand environmental considerations
Carry out all out of service and securing procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course- 5 days depending on experience
Experienced worker tests- 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

Dynamic Training and Assessments Ltd

Construction

CSCS (Construction Skills Certification Scheme)

NPORS

NPORS Excavator as a Crane (N100)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to prepare, attach, guide and move suspended loads using a range of lifting accessories. It will enable the candidate to carry out their duties while complying with LOLER regulations.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as a Slinger Signaller</li><li fr-original-style="" style="box-sizing: border-box;">Conform to relevant regulations, legislation and manufacturers requirements as per technical data</li><li fr-original-style="" style="box-sizing: border-box;">Locate, identify and explain different types of lifting equipment and lifting accessories.</li><li fr-original-style="" style="box-sizing: border-box;">Explain their basic construction, uses, applications and their functions</li><li fr-original-style="" style="box-sizing: border-box;">Interpret and extract information on all relevant documentation</li><li fr-original-style="" style="box-sizing: border-box;">Undertake all pre-use checks on non-specialist lifting accessories and identify non-serviceable items</li><li fr-original-style="" style="box-sizing: border-box;">Explain procedures for placing non-serviceable items out-of-service</li><li fr-original-style="" style="box-sizing: border-box;">Identify and explain centres of gravity and calculate estimated weights of loads</li><li fr-original-style="" style="box-sizing: border-box;">Set up exclusion zones explaining actions required for emergency actions and identifying any overhead hazards</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for Slinger Signaller use</li><li fr-original-style="" style="box-sizing: border-box;">Secure various types of loads to a hook using the relevant lifting accessories and procedures ensuring load balance, security and integrity</li><li fr-original-style="" style="box-sizing: border-box;">Direct and guide the movement of loads to different types of location using different methods of communication</li><li fr-original-style="" style="box-sizing: border-box;">Understand environmental considerations</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all out-of service and securing procedures</li></ul><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Entry Requirements</h2>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Duration</h2>Novice course &ndash; 2 DaysExperienced Worker Tests- 1 Day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to prepare, attach, guide and move suspended loads using a range of lifting accessories. It will enable the candidate to carry out their duties while complying with LOLER regulations.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as a Slinger Signaller
Conform to relevant regulations, legislation and manufacturers requirements as per technical data
Locate, identify and explain different types of lifting equipment and lifting accessories.
Explain their basic construction, uses, applications and their functions
Interpret and extract information on all relevant documentation
Undertake all pre-use checks on non-specialist lifting accessories and identify non-serviceable items
Explain procedures for placing non-serviceable items out-of-service
Identify and explain centres of gravity and calculate estimated weights of loads
Set up exclusion zones explaining actions required for emergency actions and identifying any overhead hazards
Identify and maintain PPE appropriate for Slinger Signaller use
Secure various types of loads to a hook using the relevant lifting accessories and procedures ensuring load balance, security and integrity
Direct and guide the movement of loads to different types of location using different methods of communication
Understand environmental considerations
Carry out all out-of service and securing procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course – 2 Days
Experienced Worker Tests- 1 Day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Slinger / Signaller (N402)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate 360&deg; excavators to excavate and load materials.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Identify and maintain PPE appropriate for excavator use</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely across varying terrain in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out excavating tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out excavating tasks</li><li fr-original-style="" style="box-sizing: border-box;">Load material onto transporting vehicles or into containers</li><li fr-original-style="" style="box-sizing: border-box;">Reinstate excavation, grade and level ground</li><li fr-original-style="" style="box-sizing: border-box;">Fit and remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Entry Requirements</h2>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course &ndash; 10 Days depending upon experienceExperienced worker tests &ndash; 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate 360° excavators to excavate and load materials.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as a plant operator
Understand the manufacturer’s handbook for the particular machine to be used
Locate and identify the major components of the machine and explain their functions
Locate and identify steering, driving and braking controls and explain their functions
Identify and maintain PPE appropriate for excavator use
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely
Configure the machine for travel and manoeuvre it safely across varying terrain in open and confined areas
Conduct all necessary safety checks at the work area
Manoeuvre the machine to the work area and correctly configure in readiness to carry out excavating tasks
Carry out excavating tasks
Load material onto transporting vehicles or into containers
Reinstate excavation, grade and level ground
Fit and remove attachments
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course – 10 Days depending upon experience
Experienced worker tests – 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Excavator 360 (N202)

Course Description: This 1 day course is aimed at supervisors/team leaders/managers to provide an understanding of the correct plant operating procedures that should be adopted by plant operators in the workplace.<ul style="color: rgb(32, 42, 68); box-sizing: border-box;" fr-original-style=" color: rgb(32, 42, 68);"><li fr-original-style="" style="box-sizing: border-box;">Identify the roles and responsibilities&rsquo; of supervisor having understanding of relevant policies, procedures, legislations, risk assessments, method statements and traffic management</li><li fr-original-style="" style="box-sizing: border-box;">Check test certification of equipment and accessories to be used</li><li fr-original-style="" style="box-sizing: border-box;">Safely supervise various tasks and different environments</li><li fr-original-style="" style="box-sizing: border-box;">Carry out a toolbox talk/ safety briefing allocating roles to team</li><li fr-original-style="" style="box-sizing: border-box;">Liaise with both management and operator&rsquo;s</li><li fr-original-style="" style="box-sizing: border-box;">Produce a safe system of work giving a safe step by step guide for team to follow</li><li fr-original-style="" style="box-sizing: border-box;">Produce risk assessment</li><li fr-original-style="" style="box-sizing: border-box;">Hold a debrief with team and discuss any lessons learned</li></ul><div fr-original-style="" style="box-sizing: border-box;"> </div>

Course Description:


This 1 day course is aimed at supervisors/team leaders/managers to provide an understanding of the correct plant operating procedures that should be adopted by plant operators in the workplace.
Identify the roles and responsibilities’ of supervisor having understanding of relevant policies, procedures, legislations, risk assessments, method statements and traffic management
Check test certification of equipment and accessories to be used
Safely supervise various tasks and different environments
Carry out a toolbox talk/ safety briefing allocating roles to team
Liaise with both management and operator’s
Produce a safe system of work giving a safe step by step guide for team to follow
Produce risk assessment
Hold a debrief with team and discuss any lessons learned



NPORS Plant Supervisor Awareness (N034)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate a industrial counterbalance lift truck.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understand the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely laden and unladen, in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;">Load and unload external transport safely</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate a industrial counterbalance lift truck.
Course Content
Candidates will be able to:
Understand the industry, the dangers of working in the industry and their responsibilities as a plant operator
Understand the manufacturer’s handbook for the particular machine to be used
Locate and identify the major components of the machine and explain their functions
Locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely
Configure the machine for travel and manoeuvre it safely laden and unladen, in open and confined areas
Conduct all necessary safety checks at the work area
Manoeuvre the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks
Carry out lifting and load handling tasks
Lift and transfer loads accurately and safely at different locations
Load and unload external transport safely
Fit, adjust and or remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course- 5 days depending on experience
Experienced worker tests- 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

Lifting Operations & Lifting Equipment Regulations (LOLER)

Site Management Safety Training Scheme (SMSTS)

NEBOSH

Overhead Crane Operator

FLT (Fork Lift Truck Driving License)

Lifting Operations

NPORS Industrial Counterbalance Lift Truck (N001)

Course Information&nbsp;By the end of this course, delegates will be able to:<ul style="color: rgb(32, 42, 68); box-sizing: border-box;" fr-original-style=" color: rgb(32, 42, 68);"><li fr-original-style="" style="box-sizing: border-box;">Identify the roles and responsibilities&rsquo; of supervisor having understanding of relevant policies, procedures, legislations, risk assessments, method statements and traffic management</li><li fr-original-style="" style="box-sizing: border-box;">Check test certification of equipment and accessories to be used</li><li fr-original-style="" style="box-sizing: border-box;">Safely supervise various tasks and different environments</li><li fr-original-style="" style="box-sizing: border-box;">Carry out a toolbox talk/ safety briefing allocating roles to team</li><li fr-original-style="" style="box-sizing: border-box;">Liaise with both management and operator&rsquo;s</li><li fr-original-style="" style="box-sizing: border-box;">Produce a safe system of work giving a safe step by step guide for team to follow</li><li fr-original-style="" style="box-sizing: border-box;">Produce risk assessment</li><li fr-original-style="" style="box-sizing: border-box;">Hold a debrief with team and discuss any lessons learned</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.

Course Information 
By the end of this course, delegates will be able to:
Identify the roles and responsibilities’ of supervisor having understanding of relevant policies, procedures, legislations, risk assessments, method statements and traffic management
Check test certification of equipment and accessories to be used
Safely supervise various tasks and different environments
Carry out a toolbox talk/ safety briefing allocating roles to team
Liaise with both management and operator’s
Produce a safe system of work giving a safe step by step guide for team to follow
Produce risk assessment
Hold a debrief with team and discuss any lessons learned
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.

NPORS Lift Truck Supervisor Awareness (N036)

Course InformationBy the end of the course, delegates should be able to:&nbsp;<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Demonstrate a basic understanding of the industry and their roles and responsibilities as an operator&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate a knowledge and understanding of the machine and how to operate it safely&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate a working knowledge of the manufacturer&rsquo;s handbook</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Locate and identify the major components and controls of the machine and explain their functions&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operation checks  Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel then move off and stop safely</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Manoeuvre the machine safely when laden and unladen, over varying terrain and rough ground, &nbsp;in open and confined areas and on inclines</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Carry out stacking tasks, including loading onto transport vehicle</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Safely place loads onto machine conveyor belt</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Fit, adjust and/or remove attachments&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures.</li></ul>

Course Information
By the end of the course, delegates should be able to: 
Demonstrate a basic understanding of the industry and their roles and responsibilities as an operator
Demonstrate a knowledge and understanding of the machine and how to operate it safely
Demonstrate a working knowledge of the manufacturer’s handbook
Locate and identify the major components and controls of the machine and explain their functions
Conduct all pre-operation checks  Conduct all necessary safety checks at the work area
Safely mount and dismount the machine
Configure the machine for travel then move off and stop safely
Manoeuvre the machine safely when laden and unladen, over varying terrain and rough ground, in open and confined areas and on inclines
Carry out stacking tasks, including loading onto transport vehicle
Safely place loads onto machine conveyor belt
Fit, adjust and/or remove attachments
Carry out all end of shift and shut down procedures.

NPORS Log Handler (N106)

Liverpool

<div style="color: rgb(255, 255, 255); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(255, 255, 255);"><div style="color: rgb(130, 131, 131); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(130, 131, 131);"><div style="color: rgb(255, 255, 255); box-sizing: border-box;" fr-original-style=" color: rgb(255, 255, 255);"><div style="color: rgb(130, 131, 131); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(130, 131, 131);"><div style="color: rgb(255, 255, 255); box-sizing: border-box;" fr-original-style=" color: rgb(255, 255, 255);"><h1 style="color: inherit; box-sizing: border-box;" fr-original-style=" color: inherit;">LED Facials</h1><a href="https://satacademy.co.uk/courses/led-facials/#learndash-course-content" style="color: rgb(255, 255, 255); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(255, 255, 255);">&nbsp;</a><a href="https://satacademy.co.uk/members/course/" style="color: rgb(130, 131, 131); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(130, 131, 131);"><img alt="" src="https://satacademy.co.uk/wp-content/uploads/avatars/31/601d2ae427bb5-bpthumb.png" srcset="https://satacademy.co.uk/wp-content/uploads/avatars/31/601d2ae39e0dc-bpfull.png 2x" height="80" width="80" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable">&nbsp;</a></div><div style="color: rgb(255, 255, 255); box-sizing: border-box;" fr-original-style=" color: rgb(255, 255, 255);"><a href="https://satacademy.co.uk/members/course/" style="color: rgb(130, 131, 131); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(130, 131, 131);">Cornelius</a>&middot;October 7, 2020</div></div><div style="color: rgb(130, 131, 131); box-sizing: border-box;" fr-original-style=" color: rgb(130, 131, 131);">Training Date &ndash;&nbsp;Monday &nbsp;8/8, 1/2 day AM and PM courses &pound;125</div></div></div></div><div style="color: rgb(130, 131, 131); box-sizing: border-box;" fr-original-style=" color: rgb(130, 131, 131);"> </div>

LED Facials

Cornelius·October 7, 2020
Training Date – Monday 8/8, 1/2 day AM and PM courses £125

SATA Training Academy

Dermatology

Skin peel training covers theory, demonstrations, and hands-on practice using the CLINICCARE AHA/BHA chemical peel range, in order to gain experience to provide appropriate treatment for indication.

LED Facials

General Admission

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate mobile elevating work platforms (scissor lifts) safely and efficiently while carrying out work at heights.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used, and be familiar with other types of information sources and relevant legislation</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Check all emergency lowering functions</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely on level ground and inclines in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area, including overhead and underground hazards</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out accessing tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out accessing tasks, at various points up to full operating height</li><li fr-original-style="" style="box-sizing: border-box;">Travel with platform raised (where applicable)</li><li fr-original-style="" style="box-sizing: border-box;">Use platform extension section</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate mobile elevating work platforms (scissor lifts) safely and efficiently while carrying out work at heights.
Course Content
Candidates will be able to:
Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator
Understand the manufacturer’s handbook for the particular machine to be used, and be familiar with other types of information sources and relevant legislation
Locate and identify the major components of the machine and explain their functions
Locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Check all emergency lowering functions
Safely mount and dismount the machine
Configure the machine for travel
Configure the machine for travel and manoeuvre it safely on level ground and inclines in open and confined areas
Conduct all necessary safety checks at the work area, including overhead and underground hazards
Manoeuvre the machine to the work area and correctly configure in readiness to carry out accessing tasks
Carry out accessing tasks, at various points up to full operating height
Travel with platform raised (where applicable)
Use platform extension section
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course- 5 days depending on experience
Experienced worker tests- 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS MEWP Scissor Lift (N109)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate a Telescopic Handler to move and transport loads at various heights safely and efficiently.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used and other relevant sources of information</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely laden and unladen, over varying terrain, rough ground, inclines, in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;">Load and unload external transport safely</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate a Telescopic Handler to move and transport loads at various heights safely and efficiently.
Course Content
Candidates will be able to:
Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator
Understand the manufacturer’s handbook for the particular machine to be used and other relevant sources of information
Locate and identify the major components of the machine and explain their functions
Locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely
Configure the machine for travel and manoeuvre it safely laden and unladen, over varying terrain, rough ground, inclines, in open and confined areas
Conduct all necessary safety checks at the work area
Manoeuvre the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks
Carry out lifting and load handling tasks
Lift and transfer loads accurately and safely at different locations
Load and unload external transport safely
Fit, adjust and or remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course- 5 days depending on experience
Experienced worker tests- 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Telescopic Handler (N010)

Chelmsford

Stratford

This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries.
It is endorsed by Build UK as the standard training for all construction managers.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
• Health, safety, welfare and environmental legislation affecting your daily work
• New guidance and industry best practice
• Duties and responsibilities with regards to health, safety, welfare, and the environment
• Safe working
Prerequisites
This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role.
Certificate
The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

SMC Safety Solutions

Site Management Safety Training Scheme (SMSTS) 5 day course

This two-day course is a must for anyone who is considering or already working in a role with supervisory responsibilities. This course provides an understanding of health, safety, welfare, and environmental issues. It highlights legal responsibilities and the need to promote health and safety to supervise effectively.
It is endorsed by Build UK as the standard training for all supervisors working on Build UK sites.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your supervisory role. To help you fulfil your responsibilities regarding health, safety, welfare, and the environment. To help you implement new guidance and industry best practice affected by changes.
Course Content
• Health and safety law and how it will apply to supervisors.
• Your supervisory responsibilities in controlling site safety.
• Risk assessments and the need for method statements.
• Effective site inductions, toolbox talks and method statement briefings.
• Monitoring site activities effectively.
• Timely intervention when bad practice is identified.
Prerequisites
This course is for you if you are considering, or already have, supervisory responsibilities.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a supervisor’s role.
Certificate
This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all supervisors.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox

Site Supervisor Training Scheme (SSSTS) - 2 Day Course

Bournemouth

Our Virtual (via Zoom) course provide the same high-quality tuition as our classroom-based sessions. Quarterly meetings will take place at the Academy



Dental Nursing Diploma with National Examining Board for Dental Nurses (NEBDN) is an internationally recognised qualification that will allow you to work as a Dental Nurse in hospitals, NHS and private dental practices.

Successful completion of Dental Nursing Diploma course will enable you to register as a Dental Care Professional with the General Dental Council (GDC) and practice as a qualified Dental Nurse.


Discover the exciting world of dental nursing and be a part of a growing field that offers endless opportunities for growth and development.
How will you learn?
In addition to our traditional class-based tuition, we also offer Virtual (via Zoom) Learning courses to cater to different learning preferences. Our Virtual Learning courses provide the same high-quality tuition as our classroom-based sessions. To participate, you will need a laptop, PC, smart phone or tablet with a built-in or external camera and microphone. From the comfort of your own home, you will have the opportunity to communicate with your tutor and classmates through video chat, using your phone or computer camera. This allows for seamless interaction, discussions, and collaborative learning.

Quarterly meetings at the Academy
To ensure a well-rounded learning experience, you will be required to attend face-to-face lessons at the Academy on a quarterly basis, which means every three months. These sessions serve several important purposes:

Practical Units: Some aspects of the course require hands-on practical training. The face-to-face lessons will cover these practical units, allowing you to gain valuable experience and apply the knowledge you have acquired during the virtual learning sessions.

Tests and Mock Exams: These assessments are important for evaluating your progress, identifying areas for improvement, and preparing you for the final exams. The Academy will provide a controlled and supervised environment to ensure the integrity and fairness of these assessments.
Attending quarterly face-to-face lessons provides a balanced approach to your learning journey. It combines the convenience and flexibility of virtual learning with the benefits of in-person interactions, practical training, and assessments. By participating in these sessions, you will have the opportunity to reinforce your knowledge, receive personalized feedback, and build a stronger connection with your tutor and classmates.
The Academy is dedicated to supporting your growth and success in dental nursing field, and the face-to-face lessons are an integral part of that commitment.



Being a Dental Nurse can be an exciting and fulfilling career that allows you to make a positive impact on people’s lives while enjoying a variety of work and opportunities to learn and grow. You’ll get to work with an amazing dental team and get to know patients, helping them to feel at ease and comfortable during their visit. You’ll be the one behind the scene making sure everything runs smoothly, and you’ll be the one that patients will turn to for assistance. You’ll also get to be a part of the latest advancements in dental technology and treatment. And on top of all that, you get to have a flexible schedule and a good earning potential, with the potential to advance in your career. All in all, being a dental nurse is one of the most exciting and fulfilling career that you can have, and you’ll get to leave work every day knowing you’ve made a real difference in the lives of others.


The course is delivered by Team of Dental Professionals who are examiners, dentists and experienced Dental tutors with years of experience in teaching Dentistry.
Dental Nurses are involved in a wide range of procedures, from routine check-ups to complex surgeries, which can make the job interesting and varied.

Patient-centered care: Dental Nurses have a direct impact on the patient’s experience and can make a positive difference in people’s lives by providing them with quality care.

Professional development: Dental Nurses have the opportunity to continue their education and expand their skills, leading to advancement and new opportunities in the field.
No previous experience required – we will teach you from A to Z.
Do you need a job?
Yes, you will have 3 months’ time from the start of your course to find a placement.
The Academy provides a list of Private and NHS Dental Surgeries, who are regularly contacting us when looking for more Trainee Dental Nurses, so you can contact them directly as a registered student at the Academy. This is a paid job, unless you would like to work voluntary for personal reasons. We also provide a reference letter to the employee in case you need it.
The course is ideal for you if:
You are looking for a qualification that leads to employment
You intend to participate within dentistry and make a positive contribution to the dental health
You wish to learn how to maintain high standards of hygiene, cleanliness, health & safety
You enjoy interacting with multidisciplinary team and different people


The curriculum is based on the GDC (General Dental Council) registration requirements for dental nurses. It sets out the knowledge, skills and behavioural requirements that should be developed and demonstrated. These are set out in terms of professional competencies, with the assessment method clearly outlined (e.g. how the skills and knowledge will be assessed in the final examinations – via written questions such as multiple choice (MCQ) or extended matching questions (EMQ) or via Objective Structured Clinical Examinations – OSCEs). We are proud to announce that our Dental Nursing students has the highest examination pass rate in OSCE examinations!
Free services– workshops, mock exams, eRoE marking and internal moderation.


Earn while you learn could be another benefit for doing this course. We provide a list of Private Surgeries who have been working with us for the last 14 years and looking to recruit more Trainee Dental Nurses.
Working together – At our Dental Department, we prioritise working together with our learners every step of the way. We firmly believe in providing unwavering support, equipping you with the necessary tools, skills, and assistance to ensure your success. We take immense pride in the achievements of our students, with a long list of graduates boasting remarkable success stories. Our commitment to your success serves as the foundation for our own accomplishments
What Can You Expect to Earn as a Dental Nurse? Compared to other caring professions, Dental Nursing is well paid and offers plenty of opportunity for continued training and development. This is great for those looking on a the long-term plan for their career and those who wish to work their way up the ladder through continued learning, experience & hard work. Trainee Dental Nurse salary for standard working week will be around £23,000 per annum. Average wage for a qualified Dental Nurses between £40,417 to £42,350 p.a.
When are the exams?
There are two exams:
1. Multiple choice theory exam. November and March.
2. Practical exam. January and June. 
Record of Experience (eROE)
To be eligible to sit your first exam, you have to complete your electronic Record of Experience (eROE). The eROE has to be submitted to your tutor by 31st Jan for March exam, and 31st August for November exam. 
London Waterloo Academy supports Mouth Cancer Research Foundation and encouraging learners to raise the awareness and participate in annual 10k walk.



Study mode – virtual (via Zoom) live stream lessons combined with a quarterly meetings Saturday/Sunday at the Academy
Duration – 1 year (part time)
Virtual (via Zoom) classes – once a week
Quarterly meetings at the Academy – date are discussed with the group in advance
Next Intake/start dates (please choose one for your course to start):
21 September 2024, Saturday classes from 9am to 11am
Registration fee – £300 (includes: administration, workshops, mock exams, RoE marking, internal moderation of RoE)
Tuition Fees – £1,400 (we offer payment plan, and accept instalments)
Exam fee – £510 will be charged at the point of candidate registration with NEBDN
One day introduction course – for those who are considering/not sure whether to step up into the Dental Industry £50.00
Call us +44 (0) 7484 014980 or email to info@waterlooacademy.co.uk or Facebook – London Waterloo Academy
Office location: The Foundry, 156 Blackfriars Rd, London SE1 8EN (Southwark Station (2-3 min walk) and Waterloo/Blackfriars Station (10 min walk))

London Waterloo Academy

Dental Nurse

Dental Assistant

VIRTUAL DENTAL NURSING DIPLOMA

Registration Fee

Tuition Fee

Exam Fee

One Day Introduction Course

Our Site Management Safety Training Scheme (SMSTS) refresher training courses, available both online and in-person, are designed for managers and individuals in positions of authority who completed their original SMSTS training program less than three years ago.

Aims
Participants will undertake a concise yet equally engaging training program covering all essential aspects of enforcing health and safety codes of practice at construction sites. Topics include in-depth discussions on risk assessments and effective methods for monitoring and managing industry-specific hazards.
Instructions
For online courses labeled “Remote Learning,” a tutor will deliver the training via video call.
All SMSTS courses are delivered and assessed in English. Participants must have a good command of the language to successfully complete the program.
Additional attendee information will be provided via email. Please ensure you check your inbox.


Site Management Safety Training Scheme (SMSTS) Refresher

Our CITB Online - Site Supervisors’ Safety Training Scheme (SSSTS) Refresher course is designed to give attendees a broad reminder of their responsibilities for health and safety on construction sites. Approved and endorsed by the United Kingdom Contractors Group, the SSSTS refresher course is a must for anyone who occupies a supervisory role on UKCG sites and wants to brush up on their knowledge of their legal responsibilities and the latest construction industry regulations.
The SSSTS Refresher course has been created to provide existing supervisors, or those who are just entering into a supervisory role, with in-depth knowledge of health and safety legislation and procedures. If a candidate completed a full SSSTS training course up to 5 years ago, they will be required to attend a refresher programme.
Prerequisites
SSSTS certificates are of course valid for up to 5 years, but due to the ever-changing nature of the industry, it is recommended that staff stay up to date by enrolling on a refresher course long before the qualification expires.
Instructions
Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

Site Supervisor Training Scheme (SSSTS) Refresher

IT Cyber Security Engineer – Job Ready Programme
Enrol in Our IT Cyber Security Engineer – Job Ready Programme with Career Support!
Gain access to 3,000+ online courses and earn Free Certificates to showcase your skills and boost your career potential.
Step into the high-demand world of cyber security with a comprehensive programme designed for the UK job market. Master critical areas like penetration testing, secure cloud architecture, AI-powered threat detection, and GDPR compliance—skills that can lead to roles earning up to £95,000 a year.
As UK businesses face £27 billion in cybercrime losses annually, the demand for skilled IT Cyber Security Engineers has never been greater. Whether you're changing careers or upskilling, this course equips you with in-demand expertise in threat intelligence, cryptography, and secure coding.
Become the digital defence every company needs. Start your journey toward a resilient and rewarding career in cyber security today.

Professional Diploma in IT Cyber Security Engineer – 25 Core Courses
– Course 01: Cyber Security Online Course: DOSS and DDOS
– Course 02: Cyber Security Training: Incident Handling & Response
– Course 03: Security Threat Management
– Course 04: Certified Information Security Manager (CISM)
– Course 05: Certified Information Systems Security Professional (CISSP)
– Course 06: CompTIA Advanced Security Practitioner (CASP)
– Course 07: Computer Network Security Complete Training
– Course 08: CyberSec First Responder: Threat Detection and Response [QLS Level 7]
– Course 09: Bash Scripting and Shell Programming for Beginners
– Course 10: Ethical Hacking Masterclass
– Course 11: CompTIA PenTest+ Ethical Hacking Course
– Course 12: BlackArch Linux: Ethical Hacking and Penetration Testing
– Course 13: Ultimate Linux Security and Hardening Training
– Course 14: The Complete Python Hacking Course: Beginner to Advanced!
– Course 15: SQL Database Basics
– Course 16: CompTIA Network+ Certification (N10-008)
– Course 17: CompTIA A+ Core 1 (220-1101) Course
– Course 18: CompTIA A+ Core 2 (220-1102) Course
– Course 19: CompTIA Security+ (SY0-601)
– Course 20: CompTIA Cloud+ CV0-002 Course
– Course 21: Cisco CCENT/CCNA Interconnecting Cisco Networking Devices Part 1
– Course 22: Cisco CCNA Interconnecting Cisco Networking Devices Part 2 (ICND2) Training
– Course 23: Cisco ASA Firewall Training with Step-by-Step Lab Workbook
– Course 24: FortiGate Firewall Training Step-by-Step Lab Workbook
– Course 25: Palo Alto Firewall Training with Step-by-Step Lab Workbook
Job Readiness & Career Development Training (Complementary)
– Course 01: Career Development Training
– Course 02: Effective CV Writing
– Course 03: CV Writing and Interview Tricks
– Course 04: Ace the Interview – Interview Prep That Makes a Difference
– Course 05: Job Search Skills
– Course 06: Effective Communication Skills for Professionals
– Course 07: Boost Your Confidence, Assertiveness
– Course 08: Body Language Secrets
– Course 09: Coaching and Mentoring
– Course 10: Presentation Skills – Present like a Pro
– Course 11: Public Speaking Course
– Course 12: Project Management Training
– Course 13: Leadership & Management
– Course 14: Negotiation and Agreement Training
– Course 15: Workplace Equality & Diversity
– Course 16: Professional Development and Personal Well-being
– Course 17: Emotional Intelligence and Human Behaviour
– Course 18: Time Management: Step By Step Training
– Course 19: Cross-Cultural Awareness
– Course 20: Productivity Boosting
– Course 21: Critical Thinking & Problem Solving
– Course 22: Perfect LinkedIn Profile Creation
– Course 23: Resume Writing Skills & Job Search With LinkedIn
– Course 24: Email Writing
– Course 25: Learn Microsoft Word, PowerPoint & Outlook In 90 Minutes!

Skill Up

IT Cyber Security Engineer – Job Ready Programme

Programme With Certification

Programme Without Certification

Southampton

Portsmouth

Rotherham

Manchester

Leeds

Kingston upon Hull

Newport

Peterborough

Milton Keynes 

Dartford

Paisley

Derby

Birmingham

Luton

Hull

Northampton

Berkshire

Bedford

Liverpool 

Swansea

Essex

BASIC to ADVANCED COURSE PACKAGE

Complete 3 courses over 2 full days and receive three qualifications:

Introduction to Phlebotomy Certificate (Nationally Recognised Level 3, Ireland Level 5)
Days 1 and 2: 9.30am – 5.00pm

Advanced Phlebotomy Certificate (Nationally Recognised Level 4, Ireland Level 6)
Day 1: 5.30pm - 8.30pm

Geopace Certificate of Competency (Nationally Recognised Accredited, CPD Practical Skills)
Day 2: 5.30pm - 8.30pm

Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.






Key Facts & Summary:


COURSE 1: INTRODUCTION TO PHLEBOTOMY COURSE - NATIONALLY RECOGNISED AND ACCREDITED VENEPUCTURE COURSE
UK Level Three (Ireland Level Five)
DUALLY ACCREDITED - Open College Network (OCN) and The CPD Certification Service (21 CPD Points)

PART 1 (DAY 1) - 9.30am to 5.00pm
PART 2 (DAY 2) - 9.30am to 5.00pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

A TWO DAY venepuncture course at Level 3. Trains up to the point of live blood draws.

On completion awards a Nationally Recognised and Accredited Certificate in Phlebotomy.

DAY ONE (PART 1) - THEORY
Attend the course location of your choice – starts at 9.30am and finishes approx. 5.00pm

DAY TWO (PART 2) - CLASSROOM
Your classroom tutor will recap on the theory element (above) after which you will begin your practical sessions learning and developing the skills required up to the point of Live Blood Draws.

DOWNLOAD A COURSE ITINERARY HERE



COURSE 2: ADVANCED PHLEBOTOMY COURSE - NATIONALLY RECOGNISED AND ACCREDITED VENEPUCTURE COURSE
UK Level Four (Ireland Level 6)
DUALLY ACCREDITED - Open College Network (OCN) and The CPD Certification Service (14 CPD Points)

PART 1 - THEORY
Complete your theory training online in the comfort of your own home or at work.

PART 2 - CLASSROOM
Follow on from your Day One Theory training, in the evening, from 5.30pm - 8.30pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.

On completion awards a Nationally Recognised and Accredited Certificate in Advanced Phlebotomy.

DOWNLOAD A COURSE ITINERARY HERE



COURSE 3: ROUTE TO COMPETENCY MASTERCLASS
CPD ACCREDITED - The CPD Certification Service

CLASSROOM
Follow on from your Day Two practical training, in the evening, from 5.30pm - 8.30pm

Adheres to World Health Organisation guidelines (meets or exceeds all guidelines) and Skills for Health Directive HSC376

GEOPACE LIVE BLOOD SESSIONS enabling you to draw human blood under 1-to-1 supervision of your tutor. You will follow a Competency Checklist, signed off by your tutor on completion.

On completion awards a Geopace Certificate of Competency - Nationally Recognised and Accredited Route to Competency - Live Blood Draws Certificate

DOWNLOAD A COURSE ITINERARY HERE




How do I attend?

EITHER -
CLASSROOM OPTION - Attend one of our scheduled classroom locations, completing your Introduction to Phlebotomy Course over 2 days. You will also complete your Advanced Training at the end of the first day and your Competency Training at the end of the second day.

Our Introduction to Phlebotomy and Advanced Phlebotomy Training Kits are supplied at no charge when booking our virtual classroom training option.
If you would like to add one or both of these kits to your classroom training option then these are available to add at time of booking. Our comprehensive training kits each mirror the same equipment and supplies used in the classroom and both include detailed video tutorials, allowing you to continue to practice and "hone" your skills after you have completed your practical training.

OR -

VIRTUAL CLASSROOM OPTION- Complete your theory training online at home or work, then join us for a one day Zoom session to complete your Introduction to Phlebotomy virtual classroom training, followed by your Advanced Training in the evening of the same day. You have the option to add a classroom-based competency session, awarding a CPD Accredited Geopace Certificate of Competency, at time of booking.

Our Virtual Classroom option includes two very comprehensive training kits - one for your introductory course and one for your advanced course. Kits are included at no charge (normally £79.95 each) and are yours to keep and to continue to practice with after you have finished your courses. The equipment and supplies included in your kits are the same as those used if you choose the classroom option.

How do I book?

Choose whether you would like to attend in a classroom or if you would like to complete your training by virtual classroom.
Click on the Classroom - Booking Options or Virtual Classroom - Booking Options buttons below to see all upcoming dates and locations.

Please note - Competency Training
Our Route to Competency Masterclass - Live Blood Sessions can only be completed in a classroom environment. This is included when you book a classroom option. When booking the virtual classroom option you can choose to add this at time of booking. You will receive a voucher code to enable you to book onto any upcoming dates or locations. For most of our two day course we run our competency training at the end of the second day and therefore you should be able to complete your full training programme with us over two days.

If you are completing your training by virtual classroom please see our list of competency training locations here.

If you would like to "mix and match" your training dates and/or locations then please call our admin team on 01525 713377 who will be more than happy to put a training package together for you on dates and / or locations that suit you.

All courses are accredited and are Skills for Health & WHO compliant.

Geopace Training

Allied Health

Allied Health Professions (AHP)

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

THIS COURSE PACKAGE INCLUDES:
1: INTRODUCTION TO PHLEBOTOMY COURSE (GPT003) - Level 3 (Ireland Level 5)
2: ADVANCED PHLEBOTOMY COURSE (GPT005) - Level 4 (Ireland Level 6)
3: GEOPACE COMPETENCY CERTIFICATE - CPD Certified (optional with Virtual Classroom)

Learn how to take blood ... train as a Phlebotomist

FAST-TRACK YOUR PHLEBOTOMY TRAINING

WITH OUR

COMPLETE TRAINING PACKAGE

20% off -  Multi-Course Discount

    Cover all stages from beginner through to Level 4

    Available as Classroom or Virtual Classroom

    Complete your beginner to advanced training in 2 days

    Awards 2 accredited qualifications - Introduction to Phlebotomy and Advanced Phlebotomy qualifications

    Both courses are dually accredited (OCN & CPD)

    Geopace Certificate of Competency included with classroom attendance or available as an option when booking virtual classroom

    Covers all steps up to live blood draw

    Learn advanced skills and techniques

    Virtual Classroom options include comprehensive Practise@Home Training Kits (yours to keep)

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Phlebotomy Training - Beginner to Advanced PACKAGE

Pilates is a great way to get your body moving, with low resistance body weight exercises it is suitable for any fitness level.Pilates help you build up your core strength, improves posture and breath as well as helping you become more aware of how your body react to movement.If you work from home or are just wanting to move more, then look no furtherA pre-course registration form should be filled out prior to attending a class.Form can be found here: <a href="https://forms.gle/CrDwjPxLk8xgo7eP9" id="isPasted" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">https://forms.gle/CrDwjPxLk8xgo7eP9</a>

Pilates is a great way to get your body moving, with low resistance body weight exercises it is suitable for any fitness level.
Pilates help you build up your core strength, improves posture and breath as well as helping you become more aware of how your body react to movement.
If you work from home or are just wanting to move more, then look no further
A pre-course registration form should be filled out prior to attending a class.
Form can be found here: https://forms.gle/CrDwjPxLk8xgo7eP9

For A Better You - Pilates & Pelvic Floor Health 

Pilates

Health & Fitness

Pelvic Floor

Pilates is a great way to get your body moving, with low resistance body weight exercises it is suitable for any fitness level.

If you work from home or are just wanted to improve yourself then look no further

Pilates - Mixed Ability - ONLINE

<div data-testid="richTextElement" style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);">ONLINE STUDY - In your own time (approx. 6 hours study time) +CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours) Awarding Body:&nbsp;Open College Network (OCN) Credit for LearningAward Level:&nbsp;Level 3 (Advanced Level) - Ireland Level 5CPD Certified:&nbsp;Yes (CPD Accreditation)Minimum Age:&nbsp;18 (16 with parental consent)Entry requirements:&nbsp;None. (English Level 2 desirable)Training Locations:&nbsp;Study online + Classroom&nbsp;OCN Accredited at UK Level 3 (Ireland Level 5) &nbsp;PART 1 - Theory:&nbsp;Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc. PART 2 - Skills and Practical Development: Safely and competently set up and maintain a Peripheral IV Infusion. Attend a classroom location to complete your practical training. <div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"> Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above. </div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">Course Itinerary:</div><div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);"> </div>PART 1 - THEORY (ONLINE) M1 - Peripheral IV Cannulation - Introduction: Definitions - understanding terminology relating to PIVC. IV Therapy and NMC guidelines. M2 - Legal &amp; Professional Responsibilities: Legal Obligations and Accountability. Criminal, Civil and Contractual law in Healthcare. Vicarious Liability and your Duty of Care. M3 - Anatomy &amp; Physiology: Sites appropriate to IV cannulation. Hand vs. arm. Advantages and disadvantages of relevant veins. An overview of Homeostasis and Fluid Balance. M4 - Hygiene and Infection Prevention &amp; Control (IPC): Reducing healthcare-associated infections. Keeping Safe. Bloodborne Pathogens and Work Practice Controls. Standard Precautions. Waste Disposal. Needle-stick injuries. M5 - Indications and Advantages: When to cannulate, infusion types and benefits over alternative infusion routes. Continuous and intermittent infusion. Prophylactic use before procedures and in unstable patients. Contraindications. M6 - Equipment: Cannula types, sizes and colour coding. How to select appropriate size. Equipment overview for total procedure. M7 - Vein Choice for Cannulation: Correct vein selection. Which veins to avoid. How to manage an unsuccessful cannulation. M8 - Procedures: Full procedure for cannulation including correct documentation. M8: Guide to Cannulation - revision M8: Video - Recap with full procedure M9 - Contraindications: When inappropriate to cannulate including patients with specific health conditions. M10 - Complications: A detailed look at potential complications during and after cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions. PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED BEFORE JOINING US FOR YOUR PRACTICAL TRAINING PART 2 (CLASSROOM: 1 - Welcome, introductions and overview: Classroom - registration and introductions. Virtual Classroom - audio/visual checks and registration. 2 - Legal &amp; Professional Responsibilities: Overview and discussion. 3 - Anatomy - key points (appropriate to PIVC): Arteries and veins. Selecting an approprate site. Sites to avoid and &ldquo;first choice&rdquo; sites. 4 - Cannulae - selection and types: A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD. 5 - Complications: Complications of pVAD insertion including examples of infiltration, haematoma, extravasation and transfixation. 6 - VIP Score: Understanding and using the Visual Infusion Phlebitis score. 7 - Equipment - overview: We take a look at all essential equipment required for PIVC. 8 - PRACTICAL SESSIONS: Multiple practical sessions throughout the session. 9 - Fluids: The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann&rsquo;s solution, Colloids (and risks), blood products. 10 - Infusion Rates: Calculating infusion rates and drops per minute. This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.&nbsp;<div style="color: rgb(85, 85, 85); box-sizing: border-box;" fr-original-style=" color: rgb(85, 85, 85);">(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)</div></div>

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 3 (Advanced Level) - Ireland Level 5
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 3 (Ireland Level 5)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Safely and competently set up and maintain a Peripheral IV Infusion.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M1 - Peripheral IV Cannulation - Introduction:
Definitions - understanding terminology relating to PIVC.
IV Therapy and NMC guidelines.
M2 - Legal & Professional Responsibilities:
Legal Obligations and Accountability. Criminal, Civil and
Contractual law in Healthcare. Vicarious Liability and your
Duty of Care.
M3 - Anatomy & Physiology:
Sites appropriate to IV cannulation. Hand vs. arm.
Advantages and disadvantages of relevant veins.
An overview of Homeostasis and Fluid Balance.
M4 - Hygiene and Infection Prevention & Control (IPC):
Reducing healthcare-associated infections. Keeping Safe.
Bloodborne Pathogens and Work Practice Controls.
Standard Precautions. Waste Disposal. Needle-stick injuries.
M5 - Indications and Advantages:
When to cannulate, infusion types and benefits over
alternative infusion routes. Continuous and intermittent infusion.
Prophylactic use before procedures and in unstable patients.
Contraindications.
M6 - Equipment:
Cannula types, sizes and colour coding. How to select
appropriate size. Equipment overview for total procedure.
M7 - Vein Choice for Cannulation:
Correct vein selection. Which veins to avoid.
How to manage an unsuccessful cannulation.
M8 - Procedures:
Full procedure for cannulation including correct documentation.
M8: Guide to Cannulation - revision
M8: Video - Recap with full procedure
M9 - Contraindications:
When inappropriate to cannulate including patients with specific health conditions.
M10 - Complications:
A detailed look at potential complications during and after
cannulation, including phlebitis, infections, petechiae and haematomas. Clinical signs and corrective actions.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM:
1 - Welcome, introductions and overview:
Classroom - registration and introductions.
Virtual Classroom - audio/visual checks and registration.
2 - Legal & Professional Responsibilities:
Overview and discussion.
3 - Anatomy - key points (appropriate to PIVC):
Arteries and veins. Selecting an approprate site. Sites to avoid and “first choice” sites.
4 - Cannulae - selection and types:
A detailed look at different types of cannulas, respective benefits and attributes. Selectinng an appropriate pVAD.
5 - Complications:
Complications of pVAD insertion including examples of
infiltration, haematoma, extravasation and transfixation.
6 - VIP Score:
Understanding and using the Visual Infusion Phlebitis score.
7 - Equipment - overview:
We take a look at all essential equipment required for PIVC.
8 - PRACTICAL SESSIONS:
Multiple practical sessions throughout the session.
9 - Fluids:
The importance of understanding fluids. Includes detailed overview of: maintenance fluids, Hartmann’s solution, Colloids (and risks), blood products.
10 - Infusion Rates:
Calculating infusion rates and drops per minute.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Intravenous Cannulation

Aesthetics

Medicine & Nursing

Venepuncture & Cannulation

Learn how to cannulate ...

    Nationally Recognised Qualification

    OCN Accredited - Level 3 (advanced) - Ireland Level 5

    CPD Accredited - The CPD Certification Service

    Classroom or Virtual Classroom options

    Covers all steps for cannulating in arm or hand

    Practise on artificial arms and fake blood!

    Essential qualification for all IV therapies

    Phlebotomy training desirable but not essential

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Peripheral I.V. Cannulation Course (GPT008)

Ten live dialogues between Prof Ernesto Spinelli and International Existential Therapists followed by an &nbsp;Experiential Study Group.<hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;">A phenomenological approach to re-view psychopathology:We aim to explore the lived experiences of irregular perceptions of reality with an open mind. Each Saturday includes a live dialogue between Prof Ernesto Spinelli and an International Existential Therapist; a moment to share your thoughts and feelings with the teachers; and a final integration facilitated by B&aacute;rbara Godoy.This series of ten Dialogues set out to explore the multifaceted dimentions and complexities associated with Existential Therapies. It attempts to engage with various interpretations of insanity through the lens of patients&#39; often painful, confounding, and deeply unsettling life experiences. TIMES AND DATES 202525 Jan.&nbsp;&ldquo;Knots&rdquo;&nbsp;with&nbsp;Prof. Ernesto Spinelli2 Feb.&nbsp;&ldquo;Healing&rdquo;&nbsp;with&nbsp;Dr. Michael Guy Thompson22 Mar.&nbsp;&ldquo;Difference&rdquo;&nbsp;with&nbsp;Dr. Todd DuBose12 Apr.&nbsp;&ldquo;Polarization&rdquo;&nbsp;with&nbsp;Prof. Kirk Schneider3 May&nbsp;&ldquo;Character&rdquo;&nbsp;with&nbsp;Prof. Robert Romanyshyn21 Jun.&nbsp;&ldquo;Opening&rdquo;&nbsp;with&nbsp;Dr. Yaqui Martinez19 Jul.&nbsp;&ldquo;Meaning&rdquo;&nbsp;with&nbsp;Dr. Jan Resnick25 Oct.&nbsp;&ldquo;Invention&rdquo;&nbsp;with&nbsp;Dr. Betty Cannon15 Nov. &ldquo;Hallucination&rdquo;&nbsp;with&nbsp;Prof. Simon du Plock13 Dec.&nbsp;&ldquo;Hysteria&rdquo;&nbsp;with&nbsp;B&aacute;rbara Godoy Full course (including dialogues): &pound;1260 (2 pm to 5 pm &ndash; UK time) Only Dialogues: &pound;630 (2 pm to 3 pm &ndash; UK time) Venue:&nbsp;Online Zoom Read the full <a href="https://www.therapyharleystreet.co.uk/2025-experiential-study-group-in-sanity-who-is-sane" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Programme here &gt;</a>Course Organised by: <img src="https://images.cademy.co.uk/d34b3e28-5501-46b2-9009-97ed10d2e273/376c7e35-cd6e-46a0-9b64-dee8373e64c4/original.png" style="width: 613px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 613px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto;" fr-original-class="fr-draggable">

Ten live dialogues between Prof Ernesto Spinelli and International Existential Therapists followed by an Experiential Study Group.



A phenomenological approach to re-view psychopathology:
We aim to explore the lived experiences of irregular perceptions of reality with an open mind. Each Saturday includes a live dialogue between Prof Ernesto Spinelli and an International Existential Therapist; a moment to share your thoughts and feelings with the teachers; and a final integration facilitated by Bárbara Godoy.
This series of ten Dialogues set out to explore the multifaceted dimentions and complexities associated with Existential Therapies. It attempts to engage with various interpretations of insanity through the lens of patients' often painful, confounding, and deeply unsettling life experiences.


TIMES AND DATES 2025
25 Jan. “Knots” with Prof. Ernesto Spinelli
2 Feb. “Healing” with Dr. Michael Guy Thompson
22 Mar. “Difference” with Dr. Todd DuBose
12 Apr. “Polarization” with Prof. Kirk Schneider
3 May “Character” with Prof. Robert Romanyshyn
21 Jun. “Opening” with Dr. Yaqui Martinez
19 Jul. “Meaning” with Dr. Jan Resnick
25 Oct. “Invention” with Dr. Betty Cannon
15 Nov. “Hallucination” with Prof. Simon du Plock
13 Dec. “Hysteria” with Bárbara Godoy


Full course (including dialogues):
£1260 (2 pm to 5 pm – UK time)

Only Dialogues:
£630 (2 pm to 3 pm – UK time)


Venue: Online Zoom


Read the full Programme here >
Course Organised by:






1914 Courses in Liverpool

NPORS Excavator as a Crane (N100)

By Dynamic Training and Assessments Ltd

NPORS Slinger / Signaller (N402)

By Dynamic Training and Assessments Ltd

NPORS Excavator 360 (N202)

By Dynamic Training and Assessments Ltd

NPORS Plant Supervisor Awareness (N034)

By Dynamic Training and Assessments Ltd

NPORS Industrial Counterbalance Lift Truck (N001)

By Dynamic Training and Assessments Ltd

NPORS Lift Truck Supervisor Awareness (N036)

By Dynamic Training and Assessments Ltd

NPORS Log Handler (N106)

By Dynamic Training and Assessments Ltd

LED Facials

By SATA Training Academy

NPORS MEWP Scissor Lift (N109)

By Dynamic Training and Assessments Ltd

NPORS Telescopic Handler (N010)

By Dynamic Training and Assessments Ltd

Search By Location