Nottinghamshire

Course information&nbsp;It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator.</li><li fr-original-style="" style="box-sizing: border-box;">Have a working knowledge of the manufacturer&rsquo;s handbook for the machine to be used and be familiar with other types of information sources and relevant legislation.</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify steering, driving and braking controls and explain their functions conduct all pre-operational checks in accordance with manufacturers and legislative requirements and check all emergency lowering functions.</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine configure the machine for travel.</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and maneuver it safely on level/rough ground and inclines in open and confined areas.</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area, including overhead and underground hazards maneuver the machine to work the area and correctly configure in readiness to carry out accessing tasks at various points up to full operating height.</li><li fr-original-style="" style="box-sizing: border-box;">Travel with platform raised (where applicable)</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures.</li></ul>Entry requirements&nbsp;In order to be eligible to undertake NPORS testing.Good understanding of spoken and written English.__________________________________________________________________________________Assessment&nbsp;Assessment will be to NPORS standards consisting of a theory test and practical test. &nbsp;CertificationNPORS Traditional card &ndash;&nbsp;With the traditional card there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required.&nbsp;NPORS CSCS &ndash;&nbsp;To ensure that the operator can receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.&nbsp;

Course information 
It is envisaged that by the end of this course of training the trainee operator will be able to answer questions on and perform the following:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator.
Have a working knowledge of the manufacturer’s handbook for the machine to be used and be familiar with other types of information sources and relevant legislation.
Be able to locate and identify steering, driving and braking controls and explain their functions conduct all pre-operational checks in accordance with manufacturers and legislative requirements and check all emergency lowering functions.
Safely mount and dismount the machine configure the machine for travel.
Configure the machine for travel and maneuver it safely on level/rough ground and inclines in open and confined areas.
Conduct all necessary safety checks at the work area, including overhead and underground hazards maneuver the machine to work the area and correctly configure in readiness to carry out accessing tasks at various points up to full operating height.
Travel with platform raised (where applicable)
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation.
Carry out all end of shift and shut down procedures.
Entry requirements 
In order to be eligible to undertake NPORS testing.
Good understanding of spoken and written English.
__________________________________________________________________________________
Assessment 
Assessment will be to NPORS standards consisting of a theory test and practical test. 
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five-year card is issued and after five years reassessment is required. 
NPORS CSCS – To ensure that the operator can receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant. 

Dynamic Training and Assessments Ltd

Construction

CSCS (Construction Skills Certification Scheme)

NPORS

NPORS MEWP Boom (N108)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate mobile elevating work platforms (scissor lifts) safely and efficiently while carrying out work at heights.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used, and be familiar with other types of information sources and relevant legislation</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Check all emergency lowering functions</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely on level ground and inclines in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area, including overhead and underground hazards</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out accessing tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out accessing tasks, at various points up to full operating height</li><li fr-original-style="" style="box-sizing: border-box;">Travel with platform raised (where applicable)</li><li fr-original-style="" style="box-sizing: border-box;">Use platform extension section</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate mobile elevating work platforms (scissor lifts) safely and efficiently while carrying out work at heights.
Course Content
Candidates will be able to:
Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator
Understand the manufacturer’s handbook for the particular machine to be used, and be familiar with other types of information sources and relevant legislation
Locate and identify the major components of the machine and explain their functions
Locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Check all emergency lowering functions
Safely mount and dismount the machine
Configure the machine for travel
Configure the machine for travel and manoeuvre it safely on level ground and inclines in open and confined areas
Conduct all necessary safety checks at the work area, including overhead and underground hazards
Manoeuvre the machine to the work area and correctly configure in readiness to carry out accessing tasks
Carry out accessing tasks, at various points up to full operating height
Travel with platform raised (where applicable)
Use platform extension section
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course- 5 days depending on experience
Experienced worker tests- 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS MEWP Scissor Lift (N109)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Overview</h2>This course is aimed at candidates that require the knowledge and practical skills to operate a Telescopic Handler to move and transport loads at various heights safely and efficiently.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course Content</h2>Candidates will be able to:<ul style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><li fr-original-style="" style="box-sizing: border-box;">Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">Understand the manufacturer&rsquo;s handbook for the particular machine to be used and other relevant sources of information</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Locate and identify steering, driving and braking controls and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">Start and stop the engine and safely move the machine off and stop it safely</li><li fr-original-style="" style="box-sizing: border-box;">Configure the machine for travel and manoeuvre it safely laden and unladen, over varying terrain, rough ground, inclines, in open and confined areas</li><li fr-original-style="" style="box-sizing: border-box;">Conduct all necessary safety checks at the work area</li><li fr-original-style="" style="box-sizing: border-box;">Manoeuvre the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;">Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;">Load and unload external transport safely</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;">Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures</li></ul><div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Entry Requirements</h2></div>NPORS CSCS &ndash; Candidates must have achieved the relevant CITB Health, Safety &amp; Environment (HS&amp;E) touch-screen-test within 2 years.Good understanding of spoken and written English.<div style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);"><h2 fr-original-style="" style="box-sizing: border-box;">Duration</h2></div>Novice course- 5 days depending on experienceExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Location</h2>Customer Site (Training &amp; Testing) &ndash; Site must adhere to NPORS specifications

Overview
This course is aimed at candidates that require the knowledge and practical skills to operate a Telescopic Handler to move and transport loads at various heights safely and efficiently.
Course Content
Candidates will be able to:
Understanding the industry, the dangers of working in the industry and their responsibilities as a plant operator
Understand the manufacturer’s handbook for the particular machine to be used and other relevant sources of information
Locate and identify the major components of the machine and explain their functions
Locate and identify steering, driving and braking controls and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely
Configure the machine for travel and manoeuvre it safely laden and unladen, over varying terrain, rough ground, inclines, in open and confined areas
Conduct all necessary safety checks at the work area
Manoeuvre the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks
Carry out lifting and load handling tasks
Lift and transfer loads accurately and safely at different locations
Load and unload external transport safely
Fit, adjust and or remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements
NPORS CSCS – Candidates must have achieved the relevant CITB Health, Safety & Environment (HS&E) touch-screen-test within 2 years.
Good understanding of spoken and written English.
Duration
Novice course- 5 days depending on experience
Experienced worker tests- 1 day theory and practical assessment
Location
Customer Site (Training & Testing) – Site must adhere to NPORS specifications

NPORS Telescopic Handler (N010)

London

Pinner

<div data-padding='{"d":"45px 0% 45px 0% "}' data-padding-top="45px" style="color: rgb(73, 73, 73); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(73, 73, 73);"><div data-parallax-speed="0" fr-original-style="" style="box-sizing: border-box;"><div data-padding='{"d":"45px 0% 45px 0% "}' data-padding-top="45px" style="color: rgb(73, 73, 73); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(73, 73, 73);"><div data-parallax-speed="0" fr-original-style="" style="box-sizing: border-box;"><div data-parallax-speed="0" id="isPasted" fr-original-style="" style="box-sizing: border-box;">Automatic driving lessons with friendly, patient, experienced and fully qualified male and female driving instructors.Our current Automatic teaching vehicle is a Nissan Micra, which our students have again found has a simple logical layout and is easy to control with good all round visibility when driving, that is why we feel it is ideal as a learning car.</div><div data-animation="fadeInUp" data-parallax-speed="0" fr-original-style="" style="box-sizing: border-box;">In addition the car has the following features for our pupil&rsquo;s safety and comfort;<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">He-Man duel controls &ndash; for safety and to give students added confidence</li><li fr-original-style="" style="box-sizing: border-box;">Power assisted Steering &ndash; for comfort and ease of use</li><li fr-original-style="" style="box-sizing: border-box;">Electric Windows</li><li fr-original-style="" style="box-sizing: border-box;">Air Conditioning</li><li fr-original-style="" style="box-sizing: border-box;">Driver and passengers air-bags</li></ul>Having the right training vehicle is essential to maximising each learners chance of passing their test in as short a time as possible! Which is always our aim at Drive2Pass School of Motoring.</div></div><div data-animation="fadeInUp" data-parallax-speed="0" fr-original-style="" style="box-sizing: border-box;"> </div><div data-animation="fadeInUp" data-parallax-speed="0" fr-original-style="" style="box-sizing: border-box;"><img alt="Manual Driving Lessons London" title="Manual Driving Lessons London" src="https://drive2pass.biz/wp-content/uploads/2018/05/LRG_DSC03557.jpg" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable"></div></div><div style="color: rgb(73, 73, 73); box-sizing: border-box;" fr-original-style=" color: rgb(73, 73, 73);"> </div></div><div data-animation="fadeInUp" data-parallax-speed="0" fr-original-style="" style="box-sizing: border-box;"><a href="https://drive2pass.biz/pass-plus/" data-gdpr-atts="{}" style="color: rgb(255, 255, 255); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(255, 255, 255);">FIND OUT MORE</a></div><div data-parallax-speed="0" fr-original-style="" style="box-sizing: border-box;">LONDON DRIVING LESSONS,&nbsp;<a href="https://drivingschool-ruislip.co.uk/" style="color: rgb(125, 184, 70); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(125, 184, 70);">RUISLIP</a>,&nbsp;<a href="https://drivingschool-harrow.co.uk/" style="color: rgb(125, 184, 70); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(125, 184, 70);">HARROW</a>,&nbsp;<a href="https://drivingschoolhillingdon.co.uk/" style="color: rgb(125, 184, 70); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(125, 184, 70);">HILLINGDON</a>,&nbsp;<a href="https://drivingschool-uxbridge.co.uk/" style="color: rgb(125, 184, 70); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(125, 184, 70);">UXBRIDGE</a>,&nbsp;<a href="https://drivingschool-wembley.co.uk/" style="color: rgb(125, 184, 70); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(125, 184, 70);">WEMBLEY</a>, PINNER,&nbsp;<a href="https://drivingschoolnorthwood.co.uk/" style="color: rgb(125, 184, 70); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(125, 184, 70);">NORTHWOOD</a>&nbsp;AND NORTHOLT</div></div><div style="color: rgb(73, 73, 73); box-sizing: border-box;" fr-original-style=" color: rgb(73, 73, 73);"> </div>

Automatic driving lessons with friendly, patient, experienced and fully qualified male and female driving instructors.
Our current Automatic teaching vehicle is a Nissan Micra, which our students have again found has a simple logical layout and is easy to control with good all round visibility when driving, that is why we feel it is ideal as a learning car.
In addition the car has the following features for our pupil’s safety and comfort;
He-Man duel controls – for safety and to give students added confidence
Power assisted Steering – for comfort and ease of use
Electric Windows
Air Conditioning
Driver and passengers air-bags
Having the right training vehicle is essential to maximising each learners chance of passing their test in as short a time as possible! Which is always our aim at Drive2Pass School of Motoring.

FIND OUT MORE
LONDON DRIVING LESSONS, RUISLIP, HARROW, HILLINGDON, UXBRIDGE, WEMBLEY, PINNER, NORTHWOOD AND NORTHOLT

Drive2Pass School Of Motoring - Barnet

Automatic driving lessons with friendly, patient, experienced and fully qualified male and female driving instructors.

Our current Automatic teaching vehicle is a Nissan Micra, which our students have again found has a simple logical layout and is easy to control with good all round visibility when driving, that is why we feel it is ideal as a learning car.

Automatic Driving Lessons London

1 Hour

5 Hour Block

10 Hours Block

Introductory Special Offer

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Rear Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 4 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N205It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for rear tipping dumper use ➢ Conduct all necessary safety checks at the work area ➢ Prepare the rear tipping dumper for use &amp; operate machinery safely and efficiently ➢ Environmental considerations ➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Rear Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 4 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N205

It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for rear tipping dumper use
➢ Conduct all necessary safety checks at the work area
➢ Prepare the rear tipping dumper for use & operate machinery safely and efficiently
➢ Environmental considerations
➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Rear Tipping Dumper (N205)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Road Rollers to compact a variety of ground. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category 214 Road RollerIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for roller use ➢ Prepare the roller for use and operate machinery safely and efficiently ➢ Conduct all necessary safety checks at the work area ➢ Operate machinery safely and efficiently ➢ Environmental considerations ➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Road Rollers to compact a variety of ground. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 3 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category 214 Road Roller
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for roller use
➢ Prepare the roller for use and operate machinery safely and efficiently
➢ Conduct all necessary safety checks at the work area
➢ Operate machinery safely and efficiently
➢ Environmental considerations
➢ Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Road Roller (N214)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N204 Forward Tipping DumperIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for forward tipping dumper use ➢ Prepare the forward tipping dumper for use and operate safely and efficiently ➢ Conduct all necessary safety checks at the work area ➢ Attach and set trailers, ready for operation ➢ Environmental considerations ➢ Storage and transport of implements and attachments ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 3 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N204 Forward Tipping Dumper
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for forward tipping dumper use
➢ Prepare the forward tipping dumper for use and operate safely and efficiently
➢ Conduct all necessary safety checks at the work area
➢ Attach and set trailers, ready for operation
➢ Environmental considerations
➢ Storage and transport of implements and attachments
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Forward Tipping Dumper (N204)

<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(38, 49, 62);">Who Should Attend</h2>This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers (mini) to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.Novice course- 3 DaysExperienced worker tests- 1 day theory and practical assessment<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Course information</h2>Category N139 Forward tipping mini dumperIt is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following: ➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator ➢ Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be used ➢ Be able to locate and identify the major components of the machine and explain their functions ➢ Be able to locate and identify key controls and explain their functions ➢ Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative requirements ➢ Identify and maintain PPE appropriate for forward tipping mini dumper use ➢ Conduct all necessary safety checks at the work area ➢ Prepare the forward tipping mini dumper for use and operate safely and efficiently ➢ Attachments set correctly ready for operation ➢ Environmental considerations ➢ Storage and transport of forward tipping mini dumper / implements / attachments ➢ Carry out all end of shift and shut down procedures<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Assessment</h2>Assessment will be to NPORS standards consisting of a theory test and practical test.<h2 style="color: rgb(38, 49, 62); box-sizing: border-box;" fr-original-style=" color: rgb(38, 49, 62);">Certification</h2>NPORS Traditional card &ndash; With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.NPORS CSCS &ndash; To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

Who Should Attend
This course is aimed at candidates that require the knowledge and practical skills operate Forward Tipping Dumpers (mini) to transport and discharge loads. This course can be completed by both novice and experienced candidates. We also offer refresher tests.
Novice course- 3 Days
Experienced worker tests- 1 day theory and practical assessment
Course information
Category N139 Forward tipping mini dumper
It is envisaged that by the end of this course of training the learner will be able to answer questions on and perform the following:
➢ Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
➢ Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
➢ Be able to locate and identify the major components of the machine and explain their functions
➢ Be able to locate and identify key controls and explain their functions
➢ Conduct all pre-operational checks in accordance with manufacturer’s and legislative
requirements
➢ Identify and maintain PPE appropriate for forward tipping mini dumper use
➢ Conduct all necessary safety checks at the work area
➢ Prepare the forward tipping mini dumper for use and operate safely and efficiently
➢ Attachments set correctly ready for operation
➢ Environmental considerations
➢ Storage and transport of forward tipping mini dumper / implements / attachments
➢ Carry out all end of shift and shut down procedures
Assessment
Assessment will be to NPORS standards consisting of a theory test and practical test.
Certification
NPORS Traditional card – With the traditional card there is no requirements to complete an NVQ, a five year card is issued and after five years reassessment is required.
NPORS CSCS – To ensure that the operator is able to receive the NPORS CSCS logo card, candidates must have completed the relevant health and safety test within the last 2 years of the test date. This will issue a trained operator card. To gain a competent operator card the candidate will be required to complete an NVQ in the specific item of plant.

NPORS Forward Tipping Mini Dumper (N139)

<ul style="color: rgb(230, 230, 230); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(230, 230, 230);"><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;">2 weeks package</li><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;">Advice and support</li><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;">Dating coach guidance</li><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;">Discuss your situation</li><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;">social interaction training</li><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;">Suitable package for drama, arguments.trying to get to know someone</li><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;">Dating advice and relationship issues guidance</li><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;">3 x 30 mins sessions per week</li><li style="color: rgb(0, 0, 0); font-weight: bold; box-sizing: border-box;" fr-original-style="color: rgb(0, 0, 0); font-weight: bold;">Dating advice for singles</li></ul> <a href="https://relationshipsmdd.com/product/m-d-d-advice-and-support-package/" id="isPasted" fr-original-style="" style="-webkit-user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">https://relationshipsmdd.com/product/m-d-d-advice-and-support-package/</a>

2 weeks package
Advice and support
Dating coach guidance
Discuss your situation
social interaction training
Suitable package for drama, arguments.trying to get to know someone
Dating advice and relationship issues guidance
3 x 30 mins sessions per week
Dating advice for singles


https://relationshipsmdd.com/product/m-d-d-advice-and-support-package/

Miss Date Doctor Dating Coach London, Couples Therapy

Psychology Counselling

Counselling Skills

Couples Counselling

Counselling

Relationship Counselling

M.D.D ADVICE AND SUPPORT PACKAGE (SINGLES)

General admission

Who should attend&nbsp;This course is aimed at people who require the knowledge and practical skills needed to enable them to safely operate and maintain a Multi Directional Lift Truck. We will conduct a learner analysis to identify the duration of training required for those with limited or no experience, whereas experienced operators can attend a one day Experienced Worker Assessment (Test Only).&nbsp;Course information Overview&nbsp;To provide knowledge and understanding in the following areas:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Have a basic understanding of the industry, the dangers of working in the industry and their &nbsp;responsibilities as a plant operator</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Have a working knowledge of the manufacturer&rsquo;s handbook for the particular machine to be &nbsp;used&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Be able to locate and identify the major components of the machine and explain their functions</li><li fr-original-style="" style="box-sizing: border-box;"> Be able to locate and identify driving, steering and braking controls in each travel mode and &nbsp;explain their functions</li><li fr-original-style="" style="box-sizing: border-box;"> Conduct all pre-operational checks in accordance with manufacturer&rsquo;s and legislative &nbsp;requirements&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Safely mount and dismount the machine</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Start and stop the engine and safely move the machine off and stop it safely in each travel mode</li><li fr-original-style="" style="box-sizing: border-box;"> Configure the machine for travel and maneuver it safely laden and unladen, in open and &nbsp;confined areas in each travel mode</li><li fr-original-style="" style="box-sizing: border-box;"> Conduct all necessary safety checks at the work area&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Maneuver the machine to the work area and correctly configure in readiness to carry out &nbsp;lifting and load handling tasks using each travel mode as appropriate</li><li fr-original-style="" style="box-sizing: border-box;">&nbsp;Carry out lifting and load handling tasks</li><li fr-original-style="" style="box-sizing: border-box;"> Lift and transfer loads accurately and safely at different locations</li><li fr-original-style="" style="box-sizing: border-box;"> Load and unload external transport safely&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Fit, adjust and or remove attachments</li><li fr-original-style="" style="box-sizing: border-box;"> Demonstrate knowledge and understanding of loading and unloading procedures for machine &nbsp;transportation&nbsp;</li><li fr-original-style="" style="box-sizing: border-box;">Carry out all end of shift and shut down procedures&nbsp;</li></ul>Entry Requirements&nbsp;For learners applying for the NPORS CSCS Card, or for those requiring the &#39;HS&amp;E TESTED Logo&#39; displayed on their card they must have passed the CITB Operatives Health, Safety and Environment Test within the last 2 years. Good understanding of spoken and written English. Assessment NPORS Theory assessment made up of open questions and multiple choice. NPORS Practical assessment.

Who should attend
 This course is aimed at people who require the knowledge and practical skills needed to enable them to safely operate and maintain a Multi Directional Lift Truck. We will conduct a learner analysis to identify the duration of training required for those with limited or no experience, whereas experienced operators can attend a one day Experienced Worker Assessment (Test Only).
 Course information Overview
 To provide knowledge and understanding in the following areas:
Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as a plant operator
Have a working knowledge of the manufacturer’s handbook for the particular machine to be used
Be able to locate and identify the major components of the machine and explain their functions
Be able to locate and identify driving, steering and braking controls in each travel mode and explain their functions
Conduct all pre-operational checks in accordance with manufacturer’s and legislative requirements
Safely mount and dismount the machine
Start and stop the engine and safely move the machine off and stop it safely in each travel mode
Configure the machine for travel and maneuver it safely laden and unladen, in open and confined areas in each travel mode
Conduct all necessary safety checks at the work area
Maneuver the machine to the work area and correctly configure in readiness to carry out lifting and load handling tasks using each travel mode as appropriate
Carry out lifting and load handling tasks
Lift and transfer loads accurately and safely at different locations
Load and unload external transport safely
Fit, adjust and or remove attachments
Demonstrate knowledge and understanding of loading and unloading procedures for machine transportation
Carry out all end of shift and shut down procedures
Entry Requirements 
For learners applying for the NPORS CSCS Card, or for those requiring the 'HS&E TESTED Logo' displayed on their card they must have passed the CITB Operatives Health, Safety and Environment Test within the last 2 years. Good understanding of spoken and written English. Assessment NPORS Theory assessment made up of open questions and multiple choice. NPORS Practical assessment.

NPORS Multi Directional Lift Truck (N135)

Could there be a way to release pain, unwanted habits, or life’s ups and downs? How about making positive changes happen with this powerful method – EFT Tapping, short for Emotional Freedom Techniques, and affectionately known as Tapping. EFT is The most effective energy healing modality or any modality at all that we have ever experienced.

This course explains the theory and practice of EFT Tapping and gives you practical experience of the full range of powerful possibilities, for you or yours.

This is not a pen-and-paper or video presentation class! This is live healing that you can actually feel! You will leave having actually experienced various forms of the EFT Tapping training at this level, with full confidence in applying it with ease.

Learn and experience how to easily let go of life's stresses, strains, and ups & downs.

Learn and experience how to get relief from neck and shoulder tension, headaches, chronic back-ache.

Learn and experience how to get control over bad habits like eating that one biscuit too many, drinking that extra glass of wine, or those cigarettes – without any unwanted side-effects!


Learn from an EFT Tapping Master Practitioner, Trainer and Author with experience in running workshops since 1999, and who is committed to raising standards and awareness of EFT Tapping.

EFT Course UK Online Zoom Live

EFT Course EFT Tapping Live On Zoom Level 1

General Admission

Portsmouth

Rotherham

Manchester

Leeds

Newport

Peterborough

Milton Keynes 

Dartford

Paisley

Derby

Birmingham

Luton

Hull

Berkshire

Bedford

Liverpool 

Swansea

Essex

ONLINE STUDY - In your own time (approx. 6 hours study time) +
CLASSROOM SESSION - Morning, Afternoon or Evening session (approx. 3 hours)



Awarding Body: Open College Network (OCN) Credit for Learning
Award Level: Level 4 (Foundation Degree Level) - Ireland Level 6
CPD Certified: Yes (CPD Accreditation)
Minimum Age: 18 (16 with parental consent)
Entry requirements: None. (English Level 2 desirable)
Training Locations: Study online + Classroom
 
OCN Accredited at UK Level 4 (Ireland Level 6)

 
PART 1 - Theory: Complete this part of your course online at home or work in your own time (stop and start learning when it suits you). Can be completed on multiple devices - smart phones, kindle, laptop, tablet etc.

PART 2 - Skills and Practical Development:
Covers advanced specialised phlebotomy techniques to give you the leading edge as a phlebotomist. Learn to use a wide range of non-routine equipment.


Attend a classroom location to complete your practical training.


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


Course Itinerary:
PART 1 - THEORY (ONLINE)
M00 - Introduction:
Learning outcomes, Assumptions and Overview.
M01 - Basic Phlebotomy - revision:
Recap of basic phlebotomy theory and practice - precursor to
the advanced course.
M02 - Aspirated and Vacuated Systems:
Open systems (Syringe & Needle), closed systems (Vacutainer & Monovette), Alternative closed systems, Using Monovette - aspiration and evacuated techniques, monovette adapter systems.
M03 - Specialised and Advanced Phlebotomy Equipment:
The centrifuge - overview. Safe operation and use. Managing a centrifuge breakage or spillage.
Equipment and practices in unusual situations.
Patients with special needs and requiring specific attention.
Equipment preparation for blood samples that are collected at
0 degrees, 37 degrees C and other non-standard conditions.
A look at advances in technology and how to use the latest devices.
M04 - Point of Care Testing:
What is POC Testing? Advantages, Disadvantages and Clinical
Outcomes. Comparison of POC with lab testing. 10 common POC tests. Roles for phlebotomists performing POC Tests.
M05 - Neonates and Children:
Sample collection from new-born to pre-adult. A detailed overview of legal principles of law including child consent and child protection for phlebotomists. Neonatal and child blood collection equipment.
A comprehensive look at heel and finger-prick procedures including
microtainers, lancets and capillary tube collection. Detailed heel prick procedure. Paediatric finger prick collection. The life-threatening hazard of over-collecting. Communication techniques in differing age bands.
Consent and the law. Basic principles of lawful consent for neonates and paediatric patients. Child protection.
Detailed analysis of neonatal and paediatric blood collection including Guthrie card collection. Neonatal bottles - colours and tests. Paediatric blood gases collection.
Butterfly needles - when to use. Blood tests during pregnancy. Neonatal blood screening - nine conditions covered. Bilirubin in neonates.
M06 - Geriatric Patients:
The challenges of phlebotomy in older people. Understanding skin changes and venepuncture implications. A profile of common
geriatric blood tests. Age related problems. Procedural precautions.
M07 - Special Procedures:
Drawing blood from back of hand. Drawing blood from lower limb veins. Managing the unwilling or difficult patient. Managing the psychiatric patient. Managing the isolated patient. Non-routine blood tests. Managing the latex allergy patient (type 1 and type 4 reactions). Latex indicators. Sample handling - non-routine procedures. Drug trials and research projects.
M08 - Special Tests and Sample Handling Procedures:
A look at sample collection at specific times of day and night,
samples that are protected from light, collected on ice and
collected at body temperature. Procedures for each group - collection notes, analytic time, optimal collection time and notes for each group.
M09 - Advanced Phlebotomy Tasks:
Additional procedures. Maintaining POC equipment. Stock control and stock rotation. Quality control. Data entry. Product evaluation. Training and competency evaluation.
M10 - Alternative Environments:
A step-by-step look at non-clinical phlebotomy environments including private testing, DEFRA, forensic and police, cord blood collection, DNA analysis, veterinary services, overseas and volunteering.

PLEASE NOTE THAT PART 1 SHOULD BE COMPLETED
BEFORE JOINING US FOR YOUR PRACTICAL TRAINING

PART 2 (CLASSROOM)
MORNING , AFTERNOON OR EVENING SESSION:

1 - Welcome, introductions and overview:
- Classroom - health & safety briefing, schedule overview.
- Virtual Classroom - audio/visual checks and registration. Unpacking and overview of your training kit.
2 - Syringe and Needle (open system): Correct use and applications.
3 - Monovette (open and closed systems):
Using the Monovette system in aspiration mode - correct use and applications.
Using the Monovette system in evacuated mode - correct use and applications.
4 - IR Vein Detector:
Demonstration of the IR vein detector for assisting in detection of difficult veins.
5 - Veins in back of hand:
Detecting suitable veins in the back of the hand.
6 - POC testing:
Point of Care Testing - use of glucose meter to demonstrate a typical POC test procedure. Correct use and overview of other POC test devices.
7 - Using lancets (finger collection)
We look at the correct use of lancets for POC testing and whole blood micro-collection.
8 - Using lancets (heel collection)
We look at the correct use of lancets for neonatal blood spot tests (Guthrie Test).
9 - Capillary collection
Using glass capillary tubes for micro-collection. Correct use and handling.
10 - Microtube collection
Correct use of BD Microtainers (and similar micro-collection bottles) - collection and handling.

This course is supported with downloadable resources and may include extra video segments to reinforce your practical training.
 
(THE COURSE DELIVERY AWARDS SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR VIRTUAL CLASSROOM COURSE VERSION)



Geopace Training

Allied Health

Allied Health Professions (AHP)

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6)

    FDSc (Foundation Degree Level) qualification

    Nationally Recognised certificate

    Dually accredited: Open College Network  and CPD

    Covers both aspirated and evacuated systems

    Covers specialised blood collection systems & methods

    Classroom or Virtual Classroom learning options

    Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep)

    Complete your training from beginner to advanced level

    This course either follows on from our Introduction to Phlebotomy Course  or can be combined with our introductory course as part of a course package (see below)

    Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.


Advanced Phlebotomy - Skills & Techniques (GPT005)

This is an online course sat at your own pace to introduce you to clinical coaching.During the course we will go into the concept of training a student, learning methods, tutorial techniques, safeguarding and how to use the Central Skills Log (CSL).The course is open for 2 months. Once completed we can then arrange access to the CSL for one of Abbeydale&rsquo;s students.

This is an online course sat at your own pace to introduce you to clinical coaching.
During the course we will go into the concept of training a student, learning methods, tutorial techniques, safeguarding and how to use the Central Skills Log (CSL).
The course is open for 2 months. Once completed we can then arrange access to the CSL for one of Abbeydale’s students.

Samantha Morgan-Hourd

Veterinary

Veterinary Medicine

Animal Care

Pets & Animal Care

Clinical coach training for non- Abbeydale Training Practices- September 2025 cohort

This is an online course sat at your own pace to introduce you to clinical coaching. As an Abbeydale training practice the cost of this course is including with the annual TP fee.During the course we will go into the concept of training a student, learning methods, tutorial techniques, safeguarding and how to use the Central Skills Log (CSL).The course is open for 2 months. Once completed we can then arrange access to the CSL for one of Abbeydale&rsquo;s students.

This is an online course sat at your own pace to introduce you to clinical coaching. As an Abbeydale training practice the cost of this course is including with the annual TP fee.
During the course we will go into the concept of training a student, learning methods, tutorial techniques, safeguarding and how to use the Central Skills Log (CSL).
The course is open for 2 months. Once completed we can then arrange access to the CSL for one of Abbeydale’s students.

Clinical coach training for Abbeydale Training Practices- September 2025 cohort

Broxburn

<h3 style="color: rgb(6, 49, 77); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(6, 49, 77);">Online courses take 5 days and are spread over two weeks.</h3>2024 Dates:&nbsp;October Week 1 - 14th, 15th, 16th / Week 2 - 23rd &amp; 24th&nbsp;2025 Dates:&nbsp;January&nbsp;Week 1 - 13th, 14th 15th /&nbsp;January&nbsp;Week 2 - 20th &amp; 21stApril&nbsp;Week 1 - 22nd, 23rd&nbsp;&amp; 24th / April&nbsp;Week 2 - 29th &amp; 30thEmber Compliance is delighted to offer a new FD&amp;FA BS5839-1 RQF Certified 5-Day Combined Course which encompasses all our FD&amp;FA courses from Introduction to Maintenance complete with RQF Exam at the end of the week.At the end of the 5 days, Learners will attain an RQF Award in the requirements of FD&amp;FA systems for non-domestic buildings BS 5839-1: 2017.As an accredited training provider affiliated with FireQual, recognised by both SQA and Ofqual, our courses are meticulously designed to align with the stringent standards outlined by the BAFE SP203-1 competence scheme.&nbsp;Details of the course are as follows:Module 1: Introduction to BS 5839-1 Learners are introduced to the requirements of BS 5839-1. This module includes basic principles of fire safety and an introduction to FD&amp;FA systems requirements within the boundaries of the various legal frameworks within the UK. Module 2: Design -BS 5839-1 In this module, emphasis is placed on the process of fire alarm design, enquiry, survey, design, certification and the appropriate recording and documentation requirements. Module 3: Installation -BS 5839-1 This module explores compliance with the standard and how the installer may deal with issues not known to the designer during the installation. Module 4: Commissioning - BS 5839-1 This module explores the process of commissioning, the requirements of testing and inspecting a newly installed system and how the commissioner may deal with issues not known to the designer and/or nonconformities with the standard.Module 5: Maintenance - BS 5839-1 This module explores the process of maintenance, the requirements of inspection &amp; servicing existing systems and how the maintainer may deal with non-conformities with the standard.Exam - L3 Award in the Requirements of FD&amp;FA Systems for Non-Domestic Buildings BS 5839-1: 2017 The RQF examination allows learners to demonstrate knowledge of BS 5839-1: 2017 as part of competence in the design, installation, commissioning, and maintenance of FD&amp;FA systems. Learners will demonstrate knowledge gained within our previous modules and industry experience.<div id="isPasted" fr-original-style="" style="box-sizing: border-box;">Notes:</div>Please bring a valid form of identification (such as a driving license or passport). This identification must be shown for verification purposes and recorded by our invigilatorAdditionally, please ensure that you have a non-scientific calculator with you for the exam. Calculators on phones are not permitted.<img src="https://images.cademy.co.uk/88d338d8-7dc4-4054-bf9e-401495774eee/80ddaf3c-277e-490d-aad9-f53db6cf9e22/original.png" style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto;" fr-original-class="fr-draggable"><h3 style="color: rgb(6, 49, 77); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(6, 49, 77);">Online courses take 5 days and are spread over two weeks.</h3>October Dates:&nbsp;Week 1 - 14th, 15th, 16th&nbsp;Week 2 - 21st &amp; 22nd

Online courses take 5 days and are spread over two weeks.
2025 Dates: 
September Week 1 - 1st, 2nd & 3rd / Week 2 -24th & 25th September
September Week 1 - 29th, 30th & 1st October / Week 2 - 6th & 7th October
November Week 1 - 4th & 5th November / Week 2 - 25th 26th & 27th November.

Ember Compliance is delighted to offer a new FD&FA BS5839-1 RQF Certified 5-Day Combined Course which encompasses all our FD&FA courses from Introduction to Maintenance complete with RQF Exam at the end of the week.

At the end of the 5 days, Learners will attain an RQF Award in the requirements of FD&FA systems for non-domestic buildings BS 5839-1: 2025.

As an accredited training provider affiliated with FireQual, recognised by both SQA and Ofqual, our courses are meticulously designed to align with the stringent standards outlined by the BAFE SP203-1 competence scheme. 

Details of the course are as follows:
Module 1: Introduction to BS 5839-1
Learners are introduced to the requirements of BS 5839-1. This module includes basic principles of fire safety and an introduction to FD&FA systems requirements within the boundaries of the various legal frameworks within the UK.

Module 2: Design -BS 5839-1
In this module, emphasis is placed on the process of fire alarm design, enquiry, survey, design, certification and the appropriate recording and documentation requirements.

Module 3: Installation -BS 5839-1
This module explores compliance with the standard and how the installer may deal with issues not known to the designer during the installation.

Module 4: Commissioning - BS 5839-1
This module explores the process of commissioning, the requirements of testing and inspecting a newly installed system and how the commissioner may deal with issues not known to the designer and/or nonconformities with the standard.

Module 5: Maintenance - BS 5839-1
This module explores the process of maintenance, the requirements of inspection & servicing existing systems and how the maintainer may deal with non-conformities with the standard.

Exam - L3 Award in the Requirements of FD&FA Systems for Non-Domestic Buildings BS 5839-1: 2025
The RQF examination allows learners to demonstrate knowledge of BS 5839-1: 2025 as part of competence in the design, installation, commissioning, and maintenance of FD&FA systems. Learners will demonstrate knowledge gained within our previous modules and industry experience.

Notes:
Please bring a valid form of identification (such as a driving license or passport). This identification must be shown for verification purposes and recorded by our invigilator
Additionally, please ensure that you have a non-scientific calculator with you for the exam. 
Calculators on phones are not permitted.

Online courses take 5 days and are spread over two weeks


Ember Compliance

Fire Alarm

Professional Development

Engineer

Continuous Professional Development (CPD)

At the end of the 5 days, Learners will attain an RQF Award in the requirements of FD&FA systems for non-domestic buildings BS 5839-1: 2017.

FD&FA BS5839-1 RQF Certified 5-Day Combined Course - 2 Part Online Course

Chelmsford

This two-day course is a must for anyone who is considering or already working in a role with supervisory responsibilities. This course provides an understanding of health, safety, welfare, and environmental issues. It highlights legal responsibilities and the need to promote health and safety to supervise effectively.
It is endorsed by Build UK as the standard training for all supervisors working on Build UK sites.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your supervisory role. To help you fulfil your responsibilities regarding health, safety, welfare, and the environment. To help you implement new guidance and industry best practice affected by changes.
Course Content
• Health and safety law and how it will apply to supervisors.
• Your supervisory responsibilities in controlling site safety.
• Risk assessments and the need for method statements.
• Effective site inductions, toolbox talks and method statement briefings.
• Monitoring site activities effectively.
• Timely intervention when bad practice is identified.
Prerequisites
This course is for you if you are considering, or already have, supervisory responsibilities.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a supervisor’s role.
Certificate
This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all supervisors.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox

SMC Safety Solutions

Site Supervisor Training Scheme (SSSTS) - 2 Day Course

Stratford

This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries.
It is endorsed by Build UK as the standard training for all construction managers.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
• Health, safety, welfare and environmental legislation affecting your daily work
• New guidance and industry best practice
• Duties and responsibilities with regards to health, safety, welfare, and the environment
• Safe working
Prerequisites
This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role.
Certificate
The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

Site Management Safety Training Scheme (SMSTS) 5 day course

Our Site Management Safety Training Scheme (SMSTS) refresher training courses, available both online and in-person, are designed for managers and individuals in positions of authority who completed their original SMSTS training program less than three years ago.

Aims
Participants will undertake a concise yet equally engaging training program covering all essential aspects of enforcing health and safety codes of practice at construction sites. Topics include in-depth discussions on risk assessments and effective methods for monitoring and managing industry-specific hazards.
Instructions
For online courses labeled “Remote Learning,” a tutor will deliver the training via video call.
All SMSTS courses are delivered and assessed in English. Participants must have a good command of the language to successfully complete the program.
Additional attendee information will be provided via email. Please ensure you check your inbox.


Site Management Safety Training Scheme (SMSTS) Refresher

C01M01 - FD&amp;FA Foundation Fundamentals - BS5839-1This is a gateway course for all further learning in FD&amp;FA systems. Learners are introduced to the requirements of BS 5839-1. The module includes basic principles of fire safety and an introduction to FD&amp;FA systems requirements within the boundaries of the various legal frameworks within the UK.This is module 1 of 5 which can lead to an RQF L3 Award in the Requirements of FD&amp;FA Systems for non-domestic buildings BS 5839-1: 2017.Who should attend?Anyone involved in the procurement, delivery, and checking, of FD&amp;FA systems and those who have any responsibility for fire safety within a building e.g., architects, service managers, building/property managers, consultants, fire risk assessors, electrical contractors, fire alarm contractors, interested parties (F&amp;RS, building control, insurers)Content<ul id="isPasted" style="color: rgb(63, 77, 90); box-sizing: border-box;" fr-original-style=" color: rgb(63, 77, 90);"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Legislation / standards,</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">BS 5839-1: 2017<ul style="font-size: initial; box-sizing: border-box;" fr-original-style="font-size: initial;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Section 1 &ndash; General</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Section 2 &ndash; Design</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Section 3 &ndash; False alarms</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Section 4 &ndash; Installation</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Section 5 &ndash; Commissioning</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Section 6 &ndash; Maintenance</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Section 7 &ndash; User responsibilities</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Annexes A-G</li></ul></li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Assessment</li></ul><img src="https://images.cademy.co.uk/88d338d8-7dc4-4054-bf9e-401495774eee/5293624b-3258-4be0-b61f-1d0469f76c49/original.png" style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto;" fr-original-class="fr-draggable">

C01M01 - FD&FA Foundation Fundamentals - BS5839-1
This is a gateway course for all further learning in FD&FA systems. Learners are introduced to the requirements of BS 5839-1. The module includes basic principles of fire safety and an introduction to FD&FA systems requirements within the boundaries of the various legal frameworks within the UK.

This is module 1 of 5 which can lead to an RQF L3 Award in the Requirements of FD&FA Systems for non-domestic buildings BS 5839-1: 2025.

Who should attend?
Anyone involved in the procurement, delivery, and checking, of FD&FA systems and those who have any responsibility for fire safety within a building e.g., architects, service managers, building/property managers, consultants, fire risk assessors, electrical contractors, fire alarm contractors, interested parties (F&RS, building control, insurers)

Content
Legislation / standards,
BS 5839-1: 2025
Section 1 – General
Section 2 – Design
Section 3 – False alarms
Section 4 – Installation
Section 5 – Commissioning
Section 6 – Maintenance
Section 7 – User responsibilities
Annexes A-G
Assessment



Fire Safety

Fire Safety Awareness

This is a gateway course for all further learning in FD&FA systems.

C01M01 - FD&FA Fundamentals - BS 5839-1 (online)

Awarding Body:&nbsp;Open College Network (OCN Credit4Learning)Award Level:&nbsp;Level Three (Advanced)Minimum Age:&nbsp;18Entry requirements:&nbsp;None. English Level 2 desirable.Training Locations:&nbsp;E-learning - complete this course in the comfort of your own home or at work<hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Course Overview:It takes a very special person to care for those at the end of their life&rsquo;s journey. Yet for the terminally ill and their families, the gifts of compassion, dedication and skill are priceless treasures. This End of Life (Palliative Care) Course covers the issues and practices involved in caring for the terminally ill and is suitable for both healthcare professionals and individuals looking at optimising their care skills and practices.This course will help you to gain a better knowledge of the procedures and best practices which underpins end of life care. It will help you to learn about the delivery of optimal end of life care and improve your communication skills to strengthen working relationships with healthcare professionals during this period. You will also feel you have a much better understanding on how to support the friends and family of the person that you are caring for.In this online course, you will learn to address the ethical issues and characteristics of hospice and palliative care. You will also understand the assessment and management of pain. And you will be able to help patients and their families cope with dying, death, and the grief that follows and, in doing so, will ensure that the process is in the very best interests of the individual concerned.If you are an individual looking after a terminally ill relative this course bridges the divide between understanding how healthcare professionals work and understanding how your relative or friend should be managed by your support team.This course can also be combined with our&nbsp;Healthcare Practice (Fundamental Care Skills) Course&nbsp;which will also prepare you with a general and very solid foundation qualification in healthcare. Both qualifications combined will give you a total of 6 credits which you can also use towards other future qualifications (at many UK Colleges and Universities).Once completed you will immediately be able to download your pass certificate. (Your new accredited certificate will be posted to you within 6-8 weeks.)The nationally recognised and accredited certificate (awarded by the Open College Network) can be added to your existing certificate credit value (cumulative credits), and these may also count towards other similar college or university courses.This course will perfectly supplement any medical or nursing course, however specific, and is open to anyone. At the end of each e-learning section you have up to 6 multiple choice questions to answer, with a passmark of 65%. You can re-sit each section 3 times.<hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">Is this course for me?This course is suitable for you if:-- You are a healthcare professional or healthcare student and looking at focussing on this area of work -- You are a healthcare professional looking to add a specialised qualification to your C.V. -- You are an individual caring for a terminally ill relative or friend and would like to be fully aligned with current medical practices and end-of-life procedures -- You are currently working in a Hospice, Care Home, Geriatric Unit or Hospital and have been advised to complete this course. Add to your CPD (continual professional development) or if requested by your employer as part of your CPD or Induction Programme. (Completion of this course adds to your existing credit value and awards an Advanced Level Three Certificate)<hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);">What does this course cover?Topics covered include:M01: Introduction and Course Overview M02: Caring for people at the end of their life M03: Palliative Care M04: What is person-centred care? M05: Equality, Diversity and Rights M06: Planning Ahead M07: End of Life Strategies and Guidelines M08: Communication M09: Nutrition, Hydration and Mouth Care M10: Symptom Control M11: Identifying the Dying Phase of Life M12: The bereavement process M13: Working within the Multidisciplinary TeamDownload a certificate as soon as completed.This course is also supported with a video presentation and additional support material can be downloaded as you progress through the course.Download a&nbsp;<a href="https://drive.google.com/file/d/1zDO1PzSKxk08nGsgnig5NwCmki__qCBG/view?usp=sharing" style="color: rgb(30, 126, 200); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(30, 126, 200);"></a><a href="https://drive.google.com/file/d/1zDO1PzSKxk08nGsgnig5NwCmki__qCBG/view?usp=sharing" target="_blank" style="color: rgb(30, 126, 200); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(30, 126, 200);">Course Itinerary</a> <hr style="color: rgb(51, 51, 51); border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;" fr-original-style=" color: rgb(51, 51, 51);"><img src="https://s3.amazonaws.com/images.ecwid.com/images/wysiwyg/product/20661234/206740469/1591525097385817184361/Accreditation_Strip_jpg" fr-original-style="" style="cursor: pointer; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-class="fr-draggable">

Awarding Body: Open College Network (OCN Credit4Learning)
Award Level: Level Three (Advanced)
Minimum Age: 18
Entry requirements: None. English Level 2 desirable.
Training Locations: E-learning - complete this course in the comfort of your own home or at work



Course Overview:
It takes a very special person to care for those at the end of their life’s journey. Yet for the terminally ill and their families, the gifts of compassion, dedication and skill are priceless treasures. This End of Life (Palliative Care) Course covers the issues and practices involved in caring for the terminally ill and is suitable for both healthcare professionals and individuals looking at optimising their care skills and practices.
This course will help you to gain a better knowledge of the procedures and best practices which underpins end of life care. It will help you to learn about the delivery of optimal end of life care and improve your communication skills to strengthen working relationships with healthcare professionals during this period. You will also feel you have a much better understanding on how to support the friends and family of the person that you are caring for.
In this online course, you will learn to address the ethical issues and characteristics of hospice and palliative care. You will also understand the assessment and management of pain. And you will be able to help patients and their families cope with dying, death, and the grief that follows and, in doing so, will ensure that the process is in the very best interests of the individual concerned.
If you are an individual looking after a terminally ill relative this course bridges the divide between understanding how healthcare professionals work and understanding how your relative or friend should be managed by your support team.
This course can also be combined with our Healthcare Practice (Fundamental Care Skills) Course which will also prepare you with a general and very solid foundation qualification in healthcare. Both qualifications combined will give you a total of 6 credits which you can also use towards other future qualifications (at many UK Colleges and Universities).
Once completed you will immediately be able to download your pass certificate. (Your new accredited certificate will be posted to you within 6-8 weeks.)
The nationally recognised and accredited certificate (awarded by the Open College Network) can be added to your existing certificate credit value (cumulative credits), and these may also count towards other similar college or university courses.
This course will perfectly supplement any medical or nursing course, however specific, and is open to anyone. At the end of each e-learning section you have up to 6 multiple choice questions to answer, with a passmark of 65%. You can re-sit each section 3 times.



Is this course for me?
This course is suitable for you if:
-- You are a healthcare professional or healthcare student and looking at focussing on this area of work
-- You are a healthcare professional looking to add a specialised qualification to your C.V.
-- You are an individual caring for a terminally ill relative or friend and would like to be fully aligned with current medical practices and end-of-life procedures
-- You are currently working in a Hospice, Care Home, Geriatric Unit or Hospital and have been advised to complete this course.

Add to your CPD (continual professional development) or if requested by your employer as part of your CPD or Induction Programme.
(Completion of this course adds to your existing credit value and awards an Advanced Level Three Certificate)



What does this course cover?
Topics covered include:
M01: Introduction and Course Overview
M02: Caring for people at the end of their life
M03: Palliative Care
M04: What is person-centred care?
M05: Equality, Diversity and Rights
M06: Planning Ahead
M07: End of Life Strategies and Guidelines
M08: Communication
M09: Nutrition, Hydration and Mouth Care
M10: Symptom Control
M11: Identifying the Dying Phase of Life
M12: The bereavement process
M13: Working within the Multidisciplinary Team
Download a certificate as soon as completed.
This course is also supported with a video presentation and additional support material can be downloaded as you progress through the course.
Download a Course Itinerary






General Nursing

Care Worker

Healthcare Assistant

Care

Nursing

Medicine & Nursing

End Of Life Care

Assisting patients at the end of their life's journey ...

    Nationally Recognised Qualifications

    Accredited OCN Credit4Learning - Level 3

    Accredited CPD (The CPD Certification Service)​

    Expand your horizons to include this specialised area of caring

    Comprehensively covers end of life and terminal patient care skills

    Includes support and reference material to download and keep

    No previous experience or qualification needed

    Download a certificate on completion of your online course

1537 Courses in Leicester

NPORS MEWP Boom (N108)

By Dynamic Training and Assessments Ltd

NPORS MEWP Scissor Lift (N109)

By Dynamic Training and Assessments Ltd

NPORS Telescopic Handler (N010)

By Dynamic Training and Assessments Ltd

Automatic Driving Lessons London

By Drive2Pass School Of Motoring - Barnet

NPORS Rear Tipping Dumper (N205)

By Dynamic Training and Assessments Ltd

NPORS Road Roller (N214)

By Dynamic Training and Assessments Ltd

NPORS Forward Tipping Dumper (N204)

By Dynamic Training and Assessments Ltd

NPORS Forward Tipping Mini Dumper (N139)

By Dynamic Training and Assessments Ltd

M.D.D ADVICE AND SUPPORT PACKAGE (SINGLES)

By Miss Date Doctor Dating Coach London, Couples Therapy

NPORS Multi Directional Lift Truck (N135)

By Dynamic Training and Assessments Ltd

Search By Location