Name: Total H.248 for Engineers
Price: 2477 GBP
Availability: InStock

Redhill

<h3>BGP training course description</h3>
 A detailed study of BGP, from the basics of how it
works through to advanced issues such as route
reflectors, policy, filtering, route selection and routing
registries. The course culminates with a study of an
industrial strength BGP template illustrating important
issues such as bogon filtering. Practical hands on with
routers follow the major sessions to reinforce the
theory. 
				A multiple choice exam, leading to the LAIT III
certification, is available after the course. The exam
consists of 60 questions and lasts 2 hours.

		
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Connect enterprises to the Internet, and ISPs to each other.</li>
 <li>Describe how BGP works.</li>
 <li>List, describe and configure the main BGP attributes.</li>
 <li>Implement and troubleshoot BGP.</li>
 <li>Work with route aggregation and calculate CIDR prefixes in seconds.</li>
 <li>Influence traffic paths with BGP.</li>
 
 </ul>
 <h5>
 BGP training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone who will be working with BGP.
 
							<li>Prerequisites:</li>
							
 TCP/IP Foundation for engineers 
 Definitive IP routing for engineers.
 
							<li>Duration</li>
							
 5 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>BGP training course contents</h3>
 <ul>
				<li>Basic BGP</li>
IGPs, EGPs, What's BGP? BGP RIB, in/out process,
tables peers, adding routes. 
 Hands on Simple
configuration and troubleshooting.
				<li>The Internet and peering</li>

ASs, AS numbers, Internet structure, ISP types,
ISP network design, IXs, peering vs. transit, public/
private peering, bi/multi-lateral peering. Hands on
AS information gathering.
<li>How BGP works</li>
Incremental updates, Path vector protocols, BGP
protocol stack, the BGP header, message types,
NLRI, withdrawn routes, route refresh, route
dampening. Hands on More troubleshooting,
packet analysis.
<li>MBGP and IPv6</li>
Multiprotocol routing, AFI, SAFI, MBGP and
multicasts, IPv6, MPLS VPNs. Hands on IPv6
<li>BGPv4 aggregation</li>
CIDR, benefits, techniques, shortcuts, configuring
BGP aggregation, leaking routes. Hands on
Reducing routing table size.
<li>BGP path selection</li>
BGP attributes, attribute types, route selection
order, Local preference, AS prepend, MEDs.
 Hands on Influencing traffic with BGP.
<li>BGP routing policies</li>
What is policy? Examples, route filtering, AS
filtering, REs, applying preference selectively, peer
groups. Hands on Sophisticated policies.
<li>RIPE and routing registries</li>
RIRs, Allocations, assignments, PI vs. PA. Objects,
RPSL, routing registry, Hands on The RIPE
database.
<li>Automating BGP configuration</li>
Automation tools, whois, IRRToolSet, Bogon lists,
tracking bogon lists, HTTP, Peering, routing
registries, DNS.
<li>Communities</li>
What is a community? Community names,
communities for: peer types and geography. RFC
1998, default communities. Hands on Setting
local preference on other routers.
<li>Route servers</li>
What are route servers? LINX route servers, route
server policy control, What are route collectors,
Looking glasses. Hands on Setting up and
working with a route server.
<li>Peer relationships</li>
IBGP, EBGP, next hop self, advertising routes
into/out of BGP, synchronisation. Hands on IBGP,
troubleshooting a large BGP network.
<li>Route reflectors and confederations</li>
Full mesh IBGP, Route reflectors, RR
configuration and design, confederations,
migration issues. Hands on RR configuration.
<li>BGP architectures</li>
Stub vs. transit AS, when to use BGP,
multihoming strategies and issues, default routes.
Multihop EBGP, load balancing. Hands on Multihoming.
<li>BGP security</li>
RFC 7454, security steps, BGP TTL security,
filters, RPKI, ROAs, rsync, rrdp, validators. A
secure BGP template. Hands on RPKI prefix
validation.


 </ul>

Systems & Network Training

Network & Security

Network Engineer

Total BGP for engineers

General Admission

<h3>Linux training course description</h3>
 A Linux foundation appropriate for all flavours of Linux,
focussed on getting network engineers up and running
with Linux. The command line is used throughout. The
course progresses from the basics of Linux commands
onto useful tools such as grep, then shell features such
as piping and then onto shell scripting. Administration
aspects covered are the tasks network engineers are
most likely to encounter such as software installation.
Hands on exercises concentrate on network related
tasks such as installing net-snmp and using shell
scripts to provide network automation.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Use Linux commands to perform a variety of tasks
from manipulating files to handling processes.</li>
																				<li>Create and edit files with vi.</li>
																				<li>Work with permissions.</li>
																				<li>Write simple shell scripts.</li>
																				<li>Install software packages.</li>
 <li>Configure base networking.</li>
 </ul>
 <h5>
 Linux training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Network engineers.
 
							<li>Prerequisites:</li>
							
 TCP/IP Foundation
 
							<li>Duration</li>
							
 5 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Linux training course contents</h3>
 <ul>
				<li>What is Linux? </li>
Linux distributions, open source software.
<li>Getting started </li>
Logging in, changing passwords, logging out.
 Hands on Basics and root access.

<li>Linux basics </li>
Command structure. The Linux manuals, basic commands (who, date, tty, uname, echo, banner...).
 Hands on Using the CLI.

<li>Connecting to a network </li>
IP configuration, DHCP, static addressing, routing, ifconfig, ping, netstat, traceroute, dig.
 Hands on Network configuration and testing.

<li>Managing Software </li>
Package Concepts, Comparison of package formats, RPM, rpm Commands, Yum, Debian Packages, dpkg, apt-cache, apt-get, dselect, aptitude, Converting Between Package Formats, Dependencies and Conflicts, Startup Script Problems, Shared Libraries, Library Management
 Hands on Installing network packages such as nmap and net-snmp.

<li>Processes and log files </li>
ps, kill, background processes, at, exec, priorities. Managing Linux log files. Syslogd. Setting the time. Cron and cronjobs. Managing Processes, the Kernel: The First Process.
 Hands on Controlling daemons and services. Setting up a TFTP server.

<li>Filesystem commands </li>
Home directories, manipulating files and directories, Filesystem layout, Pathnames, hard and symbolic links. Viewing files.
 Hands on Exploring the filesystem, working with network device configuration files.

<li>The Linux editors </li>
ed, vi, shell escapes, .exrc.
 Hands on Editing network device configuration files.

<li>Extracting data from files </li>
grep, find, cut, sort and pasteâ¦
 Hands on Working with syslog files.

<li>Permissions </li>
Theory, chmod, chown, newgrp.
 Hands on Handling permission problems.

<li>The shell </li>
Metacharacters, piping and redirection.
 Hands on Running SNMP commands and working with their output.

<li>Basic shell scripting </li>
What are shell scripts? Simple scripts, control structures. Variable. Setting variables, using variables, set, scope, export, sourcing, environmental variables, read. Positional parameters: $0 to $9, $#, $* and others. shift parameter substitution. Control statements: The test command, if , while loops, for loops, the case statement.
 Hands on Automating network tasks.

<li>Customising your environment </li>
Environmental variables, stty, .profile and other startup files.
 Hands on Customising Linux.

<li>Introduction to administration </li>
The root user, su. Managing users and groups.
 Hands on The power of root.

<li>Archiving files </li>
Backups, tar, cpio, dd, gzip.
 Hands on Working with tar files.

<li>Booting Linux and Editing Files </li>
Installing Boot Loaders, GRUB Legacy, GRUB 2, Alternative Boot Loaders, the Boot Process, Boot Messages, Runlevels and the Initialization Process, Runlevel Functions, Runlevel Services, Alternative Boot Systems , Upstart, system.
 Hands on Installing network services on Linux.
 </ul>

Linux for network engineers

<h3>UNIX system administration training course description</h3>
 This five day hands on course provides a
comprehensive coverage of core UNIX administration
tasks. The course covers generic UNIX and is available
for any UNIX distribution required.
 
				<h5>What will you learn</h5>
				<ul>
				 
			<li>Administer &amp; configure UNIX systems.</li>
					<li>Maintain UNIX by handling disk space and taking
regular backups.</li>
					<li>Manage software packages.</li>
 <li>Perform basic troubleshooting.</li>
 <li>Maintain a secure UNIX system.</li>
 <li>Describe the organisation and implementation of the
filesystem.</li> </ul>
 <h5>
 UNIX system administration training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 System administrators Network administrators.
 
							<li>Prerequisites:</li>
							
 UNIX fundamentals.
							
 
							<li>Duration</li>
							
 5 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>UNIX system administration training course contents</h3>
 <ul>
				<li>Part 1 </li>
<li>Exploring UNIX command-line tools </li>
Using a shell, shell configuration, environment variables, getting help, streams, redirection and pipes, processing text using filters, manipulating files, regular expressions, grep, sed.

			<li>Managing software </li>
Package concepts, comparison of package formats, RPM, rpm commands, yum, dpkg, apt-cache, apt-get, dselect, aptitude, converting between package formats, dependencies and conflicts, startup script problems, shared libraries, library management, managing processes, the kernel: the first process, process lists, foreground &amp; background processes, process priorities, killing processes.

<li>Configuring hardware </li>
Configuring firmware and hardware, RQs, I/O addresses, DMA addresses, Boot disks, coldplug and hotplug devices, configuring expansion cards and PCI cards, kernel modules, USB devices, UNIX USB crivers, configuring hard disks, partitioning systems, LVM, common layouts, creating partitions and filesystems, maintaining filesystem health, tuning, journals, checking filesystems, monitoring disk use, mounting and unmounting filesystems.

<li>Managing files </li>
File management commands, file naming and wildcards, file archiving, links, directory commands, file ownership and group, file access control, permissions, chmod, defaults, file attributes, disk quotas, enabling and setting quotas, locating files, the FHS.

<li>	Booting UNIX and editing files </li>
Installing boot loaders, GRUB legacy, GRUB 2, alternative boot loaders, the boot process, boot messages, runlevels and the initialization process, runlevel functions, runlevel services, alternative boot systems, upstart, system.

<li>Part 2 </li>
<li>Configuring the X window system </li>
Localization, configuring basic X features, X server options, methods of configuring X, X display information, X fonts, the X GUI login system, XDMCP server, using X for remote access, screen display settings, setting your time zone, your locale, configuring printing, conceptualizing the UNIX printing architecture, understanding PostScript and ghostscript, running a printing system, configuring CUPS, monitoring and controlling the print queue.

<li>Administering the system </li>
Managing users and groups, tuning user and system environments, using system log files, understanding syslogd, setting logging options, manually logging data, rotating l;og files, reviewing log file contents, maintaining the system time, UNIX time concepts, manually setting the time, using NTP, running jobs in the future, understanding the role of cron, creating system cron jobs, creating user cron jobs, using anacron, using at.

<li>Configuring basic networking </li>
TCP/IP, network hardware, network addresses, hostnames, network ports, configuring UNIX for a local network, configuring with DHCP, static IP address, configuring routing, using GUI configuration tools, ifup and ifdown, diagnosing network connections, testing connectivity, tracing a route, checking network status , examining network traffic, additional tools.

<li>Writing scripts, configuring email, and using databases </li>
The shell environment, aliases, shell configuration files, writing scripts, commands, variables, conditional expressions, loops, functions, managing email, choosing email software, securing your email server, managing data with SQL, picking a SQL package, understanding SQL basics, using MySQL.

<li>Securing your system 	 </li>
Administering network security, super server restrictions, disabling unused servers, administering local security, securing passwords, limiting root access, setting login, process, SUID/SGID files, configuring SSH, using GPG, generating, importing and revoking keys, encrypting and decrypting data, signing messages and verifying signatures.
 </ul>

UNIX system administration

<h3>Samba training course description</h3>
 Samba enables UNIX/Linux machines to act as Microsoft File and Print servers. This two day hands on training course progresses from the basics of installing samba and simple configurations through to authentication issues and troubleshooting.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Install and configure Samba.</li>
					<li>Administrate file and printer sharing.</li>
					<li>Secure Samba servers.</li>
 <li>Troubleshoot Samba</li>
 </ul>
 
 <h5>
 Samba training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Technical staff working with Samba.
 
							<li>Prerequisites:</li>
							
 Intro to UNIX Systems Administration 
 TCP/IP Foundation.
 
							<li>Duration</li>
							
 2 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Samba training course contents</h3>
 <ul>
				<li>What is Samba?</li>
File and print servers, Samba server roles,
Windows networking, NetBIOS, SMB. Hands on
Microsoft File and Print shares, analysing the
network traffic.
<li>Installing Samba</li>
Source, binaries, where to find samba, building
and compiling Samba. Hands on Download and
install Samba.
<li>Controlling Samba</li>
Samba daemons, starting and stopping Samba,
smbcontrol, Samba net command, smb.conf.
Viewing Samba status, smbclient. Hands on
Starting and stopping Samba, testing the server.
<li>Samba configuration</li>
Simple shares, smb.conf variables, configuration
from a web browser, swat, enabling access to
swat. Hands on Configuring samba servers and
clients.
<li>File sharing</li>
Basic shares, [homes], locking options, UNIX file
permissions, controlling user access, Windows
ACLs, virtual samba servers, browsing. Hands on
File sharing and browsing.
<li>Print sharing</li>
Sharing printers, UNIX printing, CUPS, printer
drivers, [printers], PRINT$. Hands on Samba print
server.
<li>Authentication</li>
Workgroups, domains, users and passwords,
Samba domain security, Samba password
backends: smbpasswd, tdbsam, nisplus, mysql,
Active Directory. Hands on Securing samba
shares.
	<li>Troubleshooting</li>
Logging options, controlling logs, Samba utilities,
network protocols, .SMB/CIFS. Performance
tuning. Hands on Troubleshooting Samba 

 </ul>

Definitive Samba for engineers

<h3>Advanced Asterisk training course description</h3>
 This 2 day hands-on Asterisk training course covers advanced Asterisk configuration including fault tolerant clusters, upgrading and patching Asterisk servers, firewall and NAT transversal, using databases to store Asterisk data. Practical sessions follow each major section to reinforce the theory.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Configure advanced Asterisk features.</li>
										 	 <li>Utilise databases from Asterisk</li>
											 <li>Integrate Asterisk with SIP servers.</li>
 						 <li>Build High Availability Asterisk clusters.</li>
 						 <li>Maintain and secure Asterisk servers.</li>
 </ul>
 
 <h5>
 Advanced Asterisk training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Technical staff working with or evaluating Asterisk. 
 
							<li>Prerequisites:</li>
							
 Definitive Asterisk for engineers
 
							<li>Duration</li>
							
 2 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Advanced Asterisk training course contents</h3>
 <ul>
				<li>Best Practice</li>
Review of basics, Channel best practice, dial plan
best practise.
				<li>Call Centre Features</li>
GUI, Asterisk Manager Interface, billing, CDR,
advanced IVR, ACD, Vici Dial. Hands on Install
Vici-Dial
<li>Asterisk and Databases</li>
MySQL, LDAP, ODBC, dial plan from a Database,
storing CDR in a Database, Hands on Dial plan in
MySQL, CDR in MySQL.
<li>TDM over Ethernet</li>
What is TDMoE, Asterisk to Asterisk TDMoE,
Phone Bridge. Hands on * 2 * via TDMoE.
<li>High Availability Asterisk</li>
HA Linux - Virtual Servers, Fail-over steps, setting
up HA Linux, configuring Asterisk for fail-over on
HA Linux, Hands on Configure Asterisk HA.
<li>Advanced Dial plans</li>
Asterisk Gateway Interface, AGI IVR applications,
Multiple switches sharing Dial plans, ENUM,
DUNDI. Hands on Configure DUNDI.
<li>Integration</li>
Legacy PBX, SIP Proxys, OpenSER. Hands on
Configure SER to work with Asterisk.
<li>Asterisk Maintenance</li>
Asterisk upgrades, implementing patches,
advanced debugging,
<li>Security</li>
Firewalls, NAT, Asterisk security issues. Hands on Configure Asterisk to work through a Firewall
and NAT. 

 </ul>

Advanced Asterisk for Engineers

<h3>Bluetooth training course description</h3>
 Bluetooth is used by many kids these days but is probably under-utilised in business environments. This hands on training course provides an overview of what Bluetooth is, how it works, what it can be used for and how to configure it on different devices.
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Explain what Bluetooth is.</li>
 <li>Describe the Bluetooth protocol stack.</li>
 <li>Recognise the applications of Bluetooth.</li>
 <li>Configure Bluetooth.</li>
 </ul>
 <h5>
 Bluetooth training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Anyone who needs to know more about Bluetooth.
 
							<li>Prerequisites:</li>
							
 
 None.
 
							<li>Duration</li>
							
 2 days
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Bluetooth training course contents</h3>
 <ul>
				<li>Classic Bluetooth</li>
				<li>Bluetooth overview</li>
Basics, standards, competing technologies.
<li>Bluetooth radio</li>
RF bands, power losses, frequency hopping.
<li>Bluetooth modulation</li>
PSK, DPSK, DPQSK.
<li>Bluetooth data transfer</li>
FH, TDD, FDMA, ACL, SCO, Bluetooth packets.
<li>Making connections</li>
Piconets, Scatternets, Pairing
<li>The protocol stack</li>
Baseband, Link Manager, L2CAP, SDP, GAP,
RFCOMM.
<li>Profiles</li>
FTP, DUN, LAN, Synch, HDP, GOEP/OBEX etc.
<li>Security</li>
Authentication, authorisation, encryption, risks.
<li>Bluetooth Low Energy</li>
<li>Introduction</li>
Bluetooth Smart and Bluetooth Smart Ready.
<li>BLE device types</li>
Design goals, terminology and core concepts.
<li>BLE usage models</li>
Presence detection, data broadcasting
connectionless models, gateways.
<li>BLE architecture</li>
Controller, host, applications and stack splits.
<li>BLE protocol stack</li>
Link layer, HCI, L2CAP.
<li>BLE profiles</li>
GAP roles, models, procedures, security modes,
data advertising.
<li>BLE security</li>
Pairing, bonding, data signing
<li>BLE applications</li>
Devices, services, profiles, peripherals 

 </ul>

Essential Bluetooth

Aberdeen

Castleford

Exeter

Glasgow

Heathrow

Manchester

Middlesbrough

Rainham

Southampton

Wellingborough

This course is designed to provide delegates that need to enter confined spaces and hazardous areas with an in-depth understanding of the Legal requirements and the associated legislation, hazard identification and suitable control measures.Book via our website @ <a data-fr-linked="true" href="https://www.vp-ess.com/training/confined-spaces/6160-09-city-and-guilds-level-2-award-in-entrant-and-entry-controller-for-confined-spaces" id="isPasted" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; color: inherit; cursor: pointer; text-decoration: inherit;">https://www.vp-ess.com/training/confined-spaces/6160-09-city-and-guilds-level-2-award-in-entrant-and-entry-controller-for-confined-spaces</a>-(medium-ri/

This course is designed to provide delegates that need to enter confined spaces and hazardous areas with an in-depth understanding of the Legal requirements and the associated legislation, hazard identification and suitable control measures.
Book via our website @ https://www.vp-ess.com/training/confined-spaces/6160-09-city-and-guilds-level-2-award-in-entrant-and-entry-controller-for-confined-spaces-(medium-ri/
or via email at: esstrainingsales@vpplc.com
or phone on: 0800 000 346

Vp ESS Training

City & Guilds

Confined Space

Hazardous Areas

City and Guilds level 2 Award in Entrant and Entry Controller for Confined Spaces (Medium Risk) - 6160-09 - This course is designed to provide delegates that need to enter confined spaces and hazardous areas with an in-depth understanding of the Legal requirements and the associated legislation, hazard identification and suitable control measures.

Book via our website @ https://www.vp-ess.com/training/confined-spaces/6160-09-city-and-guilds-level-2-award-in-entrant-and-entry-controller-for-confined-spaces-(medium-ri/

or via email at: esstrainingsales@vpplc.com

or phone on: 0800 000 346



City & Guilds Level 2 Award in Entrant and Entry Controller for Confined Spaces (Medium Risk) - 6160-09

General admission

<h3>ADO.NET training course description</h3>
 This ADO.net training course is designed to enable
developers to use the toolset provided with.NET for
data access including ADO.net objects, data controls,
designers and interoperability with earlier ADO objects.
The course is applicable for those using C# or VB.NET
with ADO.NET 
 
				<h5>What will you learn</h5>
				<ul>
				 
	 <li>Retrieve and manipulate data using Microsoft's ADO.NET library.</li>
																				<li>Work with the ADO.NET object model. </li>
 <li>Update data, including handling stored procedures,
parameters, and return value. </li>
 <li>Search, sort and filter data.</li>
 <li>Leverage the power of XML.</li>
 </ul>
 <h5>
 ADO.NET training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Programmers working with ADO.Net.
 
							<li>Prerequisites:</li>
							
 Effective programming with VB.NET or 
 Concise introduction to C# 
							
 
							<li>Duration</li>
							
 2 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>ADO.NET training course contents</h3>
 <ul>
				<li>Introducing ADO.Net </li>
Traditional Data Access Architecture. 
ADO.Net Disconnected Data Access Architecture. 
Different components of ADO.Net.
<li>A review of basic SQL queries </li>
SQL SELECT Statement. 
SQL INSERT Statement. 
SQL UPDATE Statement. 
SQL DELETE Statement.
<li>Common data access tasks with ADO.Net </li>
Accessing Data using ADO.Net. 
Defining the connection string. 
Defining a Connection. 
Defining the command or command string. 
Defining the Data Adapter. 
Creating and filling the DataSet.
<li>A Demonstration Application </li>
The Interface. 
Loading the table. 
Filling the controls on the Form. 
Navigating through the records.
<li>Updating Data </li>
Steps for updating the table. 
Building the Application. 
Loading the table and displaying data in the form's controls. 
Initialising Commands. 
Adding Parameters to the commands. 
The ToggleControls() method of our application. 
Editing (or Updating) Records. 
Event Handler for the Save Button. 
Event Handler for the Cancel Button. 
Inserting Records. 
Deleting a Record.
<li>Using Stored Procedures </li>
Sample Stored Procedures. 
UPDATE Stored Procedure. 
INSERT Stored Procedure. 
DELETE Stored Procedure. 
SELECT Stored Procedure. 
Using Stored Procedures with ADO.Net.
			
 </ul>

Complete ADO.NET for developers

Leeds

<h2 fr-original-style=" color: rgb(36, 42, 58);" id="isPasted" style="color: rgb(36, 42, 58); box-sizing: border-box;">WHY TAKE THE <a fr-original-style="" href="https://www.tradeskills4u.co.uk/courses/green-electrical-installer" style="user-select: auto; box-sizing: border-box; text-decoration: inherit; cursor: pointer;">DOMESTIC ELECTRICAL &amp; SOLAR PV PACKAGE</a>?</h2><hr style="color: rgb(0, 0, 0); border-color: var(--border-muted); border-style: solid; clear: both; user-select: none; break-after: page; box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);">This 23 Day solar PV training course package is structured to allow you enter an exciting market.After successfully completing this course you will have the skills to install solar PV (Photovoltaic) panels and also the skills to install domestic electrics under supervision, meaning you will have 2 potential ways to generate income. Essentially you will be able to pick and choose between PV or electrical installation jobs with various contractors.&nbsp;Please note this course runs in Gatwick, however you can complete your Domestic Electrical course in Warrington, Coventry or Leeds and then do the last week at Gatwick.Course Snapshot:&nbsp;This course covers domestic installation and solar PV.&nbsp;The course breaks down as follows:<li fr-original-style=" color: rgb(0, 0, 0);" style="color: rgb(0, 0, 0); box-sizing: border-box;">15 Days In Centre (Practical &amp; Theory)</li><li fr-original-style=" color: rgb(0, 0, 0);" style="color: rgb(0, 0, 0); box-sizing: border-box;">3 Days E-Learning</li><li fr-original-style=" color: rgb(0, 0, 0);" style="color: rgb(0, 0, 0); box-sizing: border-box;">5 Days Virtual Classroom</li>

Tradeskills 4U

Solar Installation

Solar Energy

Solar Panel

DOMESTIC ELECTRICAL & SOLAR PV PACKAGE

<h3>Total H.248 training course description</h3>
 A course focusing purely on the H.248 protocol. Anyone working through the ITU standards documents can testify to the need of a training course to explain how H.248 really works. This course already assumes knowledge of other VoIP protocols and starts by positioning H.248 in relation to the other protocols. The course then looks at H.248 architectures and concepts before analysing H.248 messages and call flows. 
 
				<h5>What will you learn</h5>
				<ul>
				 
 <li>Describe what H.248 is</li>
 <li>Recognise where H.248 fits in relation to other VoIP protocols.</li>
 <li>Explain how H.248 works.</li>
 <li>Analyse H.248 packets</li>
 </ul>
 
 <h5>
 Total H.248 training course details </h5>
				<div>
					<div>
						<ul>
							<li> Who will benefit: </li>
							
 Technical staff working with H.248 
 
							<li>Prerequisites:</li>
							
 Voice Over IP.
 
							<li>Duration</li>
							
 2 days
						
 
							
 
 
						</ul>
					</div>
				</div>
 <h3>Total H.248 training course contents</h3>
 <ul>
				<li>What is H.248?</li> Review of VoIP protocols: RTP, RTCP, SIP, SDP, H.323. The PSTN and SS7. Where H.248 fits into the picture. H.248 history. MGCP. The IETF. Megaco. ITU standards. H.248v1, v2, v3. 
 
 
<li>H.248 architectures</li> Media Gateways, Media Gateway Controllers, Gateway Control functions, Signalling Gateways. Reference architectures: IMS/TISPAN: IBCF, IWF, I-BGF, SPDF. MSF: S-SBG-NC, D-SBG-NC. GSMA: IPX Proxy. Softswitches. 
 
 
<li>H.248 concepts</li> The connection model, terminations, streams, contexts. Termination properties: descriptors, context properties. Events, signals, packages. 
 
 
<li>H.248 messages</li> Protocol stack, UDP, TCP. Message structure. Transactions, actions, commands. Requests, replies, acknowledgements. Sample message flows. Binary encoding, ASN syntax, Text encoding. 
 
 
<li>H.248 commands</li> Termination manipulation: Add, Subtract, Move, Modify. Event reporting: Notify. Management: AuditCapability, AuditValue, ServiceChange. 
 
 
<li>H.248 Descriptors</li> What are descriptors? Relationship with messages and commands. Basic descriptors, Descriptors composed of other descriptors. The 19 descriptors. Defaults. 
 
 
<li>H.248 Transactions</li> Groups of commands, transaction Ids, relationship with actions and commands. Requests and replies. 
 
 
	<li>H.248 wrap up</li> What is a package? Basic packages. H.248 security. H.248 - SIP interoperation. H.248 interoperation with other protocols. 
 

 </ul>

Total H.248 for Engineers

Burnley

Have you ever wondered what is Reiki and would like to know more, then this course is for you if you would like to learn more about ReikiThis Reiki Level One course is for you if you have heard a lot about Reiki and are interested in learning more about Reiki and is an introductory course on how to use Reiki healing techniques.This is where you begin and my online course will teach you all you need to know to get you started with using Reiki on yourself and it is very simple to learn and to use. It is a gentle hands-on healing technique, which uses healing energy to treat any physical or emotional concerns.Reiki is a helpful self-development technique for anyone wanting to learn more about reiki and how to enjoy the benefits of a healing treatment.The Reiki One course is taught live on line using Zoom.What will I learn on this course:-What is Reiki and its history?The Principles of ReikiAuras and chakrasPreparation for your initiation to the Reiki energy or attunementWhat does the Reiki energy feel like?21 day cleansing processHow to practise self-healing on yourselfReiki and its uses with other therapiesYour own Reiki LineageQuestion and answer session&nbsp;You will be initiated to the Reiki energy by an attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course.I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.The course can be booked online here and you will receive instructions on how to access the course.I look forward to meeting you and sharing my knowledge and experience of Reiki with you.What this course offers you:Individual Support &ndash; During and after your course, if you have any questionsPractical Experience &ndash; Step by step training is given so that you can gain valuable experience using Reiki on yourselfEnergy Perception &ndash; You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feelPersonal Growth &ndash; You will discover for yourself the gift of Reiki healing and have increased confidence to use it for self-healingTestimonials:- What other students who have attended my courses are saying &nbsp;Level One Course&ldquo;I enjoyed this course and Margaret is a great teacher and her calming voice explains everything clearly&rdquo;. (Anne-Marie M)&ldquo;This is a very informative course. It gave me everything I needed to know to start working with the Reiki energy. (Sally R.)&ldquo;This course is excellent!&rdquo; (Phil T)

Have you ever wondered what is Reiki and would like to know more, then this course is for you if you would like to learn more about Reiki
This Reiki Level One course is for you if you have heard a lot about Reiki and are interested in learning more about Reiki and is an introductory course on how to use Reiki healing techniques.
This is where you begin and my online course will teach you all you need to know to get you started with using Reiki on yourself and it is very simple to learn and to use. It is a gentle hands-on healing technique, which uses healing energy to treat any physical or emotional concerns.
Reiki is a helpful self-development technique for anyone wanting to learn more about reiki and how to enjoy the benefits of a healing treatment.
The Reiki One course is taught live on line using Zoom.
What will I learn on this course:-
What is Reiki and its history?
The Principles of Reiki
Auras and chakras
Preparation for your initiation to the Reiki energy or attunement
What does the Reiki energy feel like?
21 day cleansing process
How to practise self-healing on yourself
Reiki and its uses with other therapies
Your own Reiki Lineage
Question and answer session 
You will be initiated to the Reiki energy by an attunement and receive a full instruction manual and your course certificate will be awarded to you at the end of the course.
I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.
The course can be booked online here and you will receive instructions on how to access the course.
I look forward to meeting you and sharing my knowledge and experience of Reiki with you.
What this course offers you:
Individual Support – During and after your course, if you have any questions
Practical Experience – Step by step training is given so that you can gain valuable experience using Reiki on yourself
Energy Perception – You will be taught to develop skills of energy perception and learn how to interpret the Reiki by what you sense and feel
Personal Growth – You will discover for yourself the gift of Reiki healing and have increased confidence to use it for self-healing
Testimonials:- What other students who have attended my courses are saying 
Level One Course
“I enjoyed this course and Margaret is a great teacher and her calming voice explains everything clearly”. (Anne-Marie M)
“This is a very informative course. It gave me everything I needed to know to start working with the Reiki energy. (Sally R.)
“This course is excellent!” (Phil T)

Margaret Cook - Learn More About Reiki

Energy Healing

Reiki

Reiki Healer

I am a Reiki Teacher in Manchester and one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course. I teach all three levels of Reiki courses, level 1 reiki. level 2 reiki and reiki master level 3

Reiki Level One Online Course - New to Reiki this is for you

Elevate your auditing expertise and lead the way in quality management with our ISO 9001:2015 Lead Auditor course, certified by CQI and IRCA. This comprehensive program is designed for professionals seeking to conduct first, second, and third-party audits of Quality Management Systems (QMS) against the ISO 9001:2015 standard.
Our course provides in-depth training on the principles and practices of auditing, equipping you with the knowledge and skills to effectively lead audit teams and assess the conformance and effectiveness of QMS in organizations. You will learn how to plan, conduct, report, and follow up on audits in compliance with ISO 19011 guidelines and ISO/IEC 17021 standards.
Key Features of the Course:
Certified Expertise: Achieve a globally recognized certification from CQI and IRCA, enhancing your professional credibility and career prospects.
Experienced Instructors: Learn from industry experts with extensive experience in quality management and auditing, who provide real-world insights and practical guidance.
Interactive Learning: Engage in hands-on exercises, case studies, and role-play scenarios that simulate real auditing situations, ensuring that you can apply what you learn directly to your work.
Comprehensive Curriculum: Cover all aspects of the ISO 9001:2015 standard, audit principles, and techniques, as well as risk-based thinking and the process approach.
Career Advancement: This course is ideal for those aspiring to become lead auditors, quality managers, or consultants, offering a pathway to new opportunities and enhanced professional status.
Upon successful completion of the course and examination, you will be awarded the prestigious CQI and IRCA certification, recognized globally as a mark of excellence in auditing. This certification will enable you to conduct audits for certification bodies and help organizations achieve compliance and continual improvement.
Enroll in our ISO 9001:2015 Lead Auditor course today and take the next step in your journey to becoming a leader in quality management.

QUALITY ACADEMY

Quality Management System

ISO 9001

Quality Management

Quality Assurance

Quality Auditor

Become a certified ISO 9001:2015 Lead Auditor with our CQI and IRCA accredited course. Gain the skills to lead quality management audits and enhance your career. Enroll now!

ISO 9001:2015 Lead Auditor (CQI and IRCA Certified)

<div id="course-pills-1">Duration2 Days12 CPD hoursThis course is intended forThe primary audience for this course is any IT, facilities or data centre professional who works in and around the data centre and who has the responsibility to achieve and improve the availability and manageability of the data centre.OverviewAfter completion of the course the participant will be able to:? Choose an optimum site for mission-critical data centre based on current and future needs? Describe all components that are important for high availability in a data centre and how to effectively setup the data centre? Name and apply the various industry standards? Describe the various technologies for UPS, fire suppression, cooling, monitoring systems, cabling standards, etc, and to select and apply them effectively to cost-efficiently enhance the high-availability of the data centre.? Review the electrical distribution system to avoid costly downtime? Enhance cooling capabilities and efficiency in the data centre by using existing and new techniques and technologies for the increased cooling requirements of the future? Design a highly reliable and scalable network architecture and learn how to ensure installers apply proper testing techniques? Create effective maintenance contracts with equipment suppliers ensuring the best return on investment? Setup effective data centre monitoring ensuring the right people get the right message? Ensure proper security measures, both procedural and technical, are established to safeguard your company's valuable information in the data centreThe course will address how to setup and improve key aspects such as power, cooling, security, cabling, safety, etc., to ensure a high available data centre. It will also address key operations and maintenance aspects.</div><div id="course-pills-2"><h4>The Data Centre, it?s Importance and Causes for Downtime</h4><h4>Data Centre Standards and Best Practices</h4><h4>Data Centre Location, Building and Construction</h4><ul><li>Selecting appropriate sites and buildings and how to avoid pitfalls Various components of an effective data centre and supporting facilities setup</li></ul><h4>Raised Floor/Suspended Ceiling</h4><ul><li>Uniform, concentrated and rolling load definitions Applicable standards Raised Floor guidelines Signal Reference Grid, grounding of racks Disability act and regulations Suspended ceiling usage and requirements</li></ul><h4>Light</h4><ul><li>Standards Light fixture types and placement Emergency lighting, Emergency Power Supply (EPS)</li></ul><h4>Power Infrastructure</h4><ul><li>Power infrastructure layout from generation to rack level ATS and STS systems Redundancy levels and techniques Three-phase and single-phase usage Power distribution options within the computer room Power cabling versus bus bar trunking Bonding versus grounding Common Mode Noise and isolation transformers Distribution boards, form factors and IP-protection grades Power quality guidelines Real power versus apparent power How to size and calculate load in the data centre Generators Static and dynamic UPS systems, selection criteria, how they operate and energy efficiency option Battery types, correct selection and testing Thermo-graphics</li></ul><h4>Electro Magnetic Fields</h4><ul><li>Electrical fields and magnetic fields definitions and units of measurements Sources of EMF Effects of EMF on human health and equipment (H)EMP Standards EMF shielding solutions</li></ul><h4>Equipment Racks</h4><ul><li>Rack standards, properties and selection criteria Security considerations Power rail/strip options</li></ul><h4>Cooling Infrastructure</h4><ul><li>Temperature and humidity recommendations Cooling measurement units and conversion rates Sensible and latent heat definitions Differences between comfort and precision cooling Overview of different air conditioner technologies Raised floor versus non-raised floor cooling Placement of air conditioner units and limitations to be observed Supplemental cooling options Cold aisle/hot aisle containment</li></ul><h4>Water Supply</h4><ul><li>Importance of water supply and application areas Backup water supply techniques</li></ul><h4>Designing a Scalable Network Infrastructure</h4><ul><li>The importance of a Structured Cabling System Planning considerations Copper and Fiber cable technology and standards ANSI/TIA-942 Cabling hierarchy and recommendations Testing and verification SAN storage cabling Network redundancy Building-to-building connectivity Network monitoring system requirements</li></ul><h4>Fire Suppression</h4><ul><li>Standards for fire suppression Detection systems Various total flooding fire suppression techniques and systems, their benefits and disadvantages Handheld extinguishers Signage and safety Regulatory requirements and best practices</li></ul><h4>Data Centre Monitoring</h4><ul><li>Data centre monitoring requirements EMS versus BMS Water leak detection systems Notification options and considerations</li></ul><h4>Operational Security and Safety Practices</h4><ul><li>Data centre security layers Physical, infrastructure and organisational security Safety measures and essential signage</li></ul><h4>Labelling</h4><ul><li>Choosing a labelling scheme Recommended labelling practices Network labelling</li></ul><h4>Documentation</h4><ul><li>How to setup proper documentation Document management policies and procedures</li></ul><h4>Cleaning</h4><ul><li>Cleaning practices for the data centre</li></ul><h4>MTBF/MTTR</h4><ul><li>Standards and definitions Calculation models The ?real? value</li></ul><h4>Maintenance Contracts/SLA/OLA</h4><h4>EXAM: Certified Data Centre Professional</h4></div><div id="course-pills-3"><h4>Additional course details:</h4> Nexus Humans Certified Data Centre Professional (CDCP) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Certified Data Centre Professional (CDCP) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.</div>

Nexus Human

IT Certifications

Construction Design & Management (CDM)

Certified Cloud Security Professional (CCSP)

AWS Certified Cloud Practitioner

Certified in Data Protection (CDP)

Certified Cyber Professional (CCP)

Certified Data Centre Professional (CDCP)

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

MJ Electrical Training 

Construction Industry Scheme (CIS)

Health & Safety

Electrical Testing

Wiring Regulations

Electrical Installation

Electrical Inspection & Testing

ECS Health & Safety Course with MJ Electrical Training. Available every week, use this course to complete the application process when applying for an ECS Labourers Card. 

ECS Card Health & Safety Course Bromley

Bromley

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Kent.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Kent

MJ Electrical Training has the largest centre network in the UK, with City &amp; Guilds exams available every week.Final exams for the 18th Edition Wiring Regulations, Part P Building Regulations, ECS Health &amp; Safety Courses&nbsp;and CSCS Green Labourers Health &amp; Safety in a Construction Environment are available weekly in Dover.<a href="https://mjelectricaltraining.co.uk/exam-venue/safety-passport/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Learn More @ MJ Electrical Training &gt;&gt;</a>Take the First Step Towards a Successful Career in the Electrical Industry with the SPA Health &amp; Safety Core DayAre you ready to kickstart or advance your career in the electrical industry? Obtaining the ECS Labourer Card is a crucial milestone that demonstrates your competence in assisting electricians in their installations. This card not only opens doors for new opportunities but also ensures that you are recognized as a qualified professional in the field. One of the most efficient ways to qualify for this essential certification is by completing the SPA Health &amp; Safety Core Day, offered by MJ Electrical Training.Why is the ECS Labourer Card Important?The ECS Labourer Card is a must-have for anyone looking to start or further their career in the electrical industry. It signifies that you are competent to assist electricians in their electrical installations under supervision, ensuring safety and efficiency on the job. While advanced qualifications like the JIB Gold Card require extensive training and experience, the ECS Labourer Card provides a valuable entry point for newcomers, trainees, and those aiming to become fully qualified electricians.Pathways to the ECS Labourer CardMJ Electrical Training outlines two primary routes to gaining the ECS Labourer Card, depending on your previous qualifications and experience:1.&nbsp;Route One: If you already hold approved JIB theory qualifications, you may be exempt from additional health and safety courses.2.&nbsp;Route Two: If you do not hold these qualifications, you will need to complete an ECS-approved Health &amp; Safety Course. The SPA Health &amp; Safety Core Day is one of the most accessible and comprehensive options available.SPA Health &amp; Safety Core Day: Your Gateway to ECS Health &amp; Safety ExemptionThe SPA Health &amp; Safety Core Day, offered by MJ Electrical Training for just &pound;174.00 (including VAT), is a one-day online face-to-face training course delivered via Teams or Zoom. Available every week, this course is designed to provide you with the essential health and safety knowledge required for the electrical industry. Completing this course will exempt you from the ECS Health &amp; Safety Assessment, streamlining your path to obtaining the ECS Labourer Card.Who Should Take This Course?The SPA Health &amp; Safety Core Day is ideal for anyone looking to gain an ECS Labourers Card or complete an ECS Health &amp; Safety Exemption:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Practising electricians looking to formalise their safety training.</li><li fr-original-style="" style="box-sizing: border-box;">Trainees and apprentices in the electrical industry.</li><li fr-original-style="" style="box-sizing: border-box;">Associated trade professionals such as electrical engineers, contracts managers, designers, consultants, surveyors, builders, and plumbers.</li></ul>Benefits of the SPA Health &amp; Safety Core Day<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Comprehensive Training: The course covers all necessary aspects of health and safety in the electrical industry, ensuring you are well-prepared for your role.</li><li fr-original-style="" style="box-sizing: border-box;">Flexible Learning: Delivered online, you can complete the training from the comfort of your home or office, making it convenient and accessible.</li><li fr-original-style="" style="box-sizing: border-box;">Certification: Upon completion, you will receive a certificate that can be used to evidence you meet the H&amp;S requirements for the ECS Labourer Card.</li></ul>Further Opportunities with the ECS Labourer CardObtaining the ECS Labourer Card allows you to progress into employment and onto further qualifications, such as:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (2392-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings (2393-10)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Initial Verification (2391-50)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in the Periodic Inspection (2391-51)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 3 Award in Inspection and Testing (2391-52)</li><li fr-original-style="" style="box-sizing: border-box;">City &amp; Guilds Level 4 Higher Professional Diploma in Building Services Engineering (4467-04)</li></ul>To qualify for the ECS Labourer Card, not only must you have an ECS-approved H&amp;S course, but you must also demonstrate active engagement in the electrotechnical sector. This proof can be provided through:<ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">An application by your employer via the ECS Employer Portal.</li><li fr-original-style="" style="box-sizing: border-box;">A written reference from your current employer on company-headed paper, stating your role as an electrical labourer, start date, and signed by an authorised person.</li><li fr-original-style="" style="box-sizing: border-box;">Confirmation of your contract duration from an agency if you are working through one.</li><li fr-original-style="" style="box-sizing: border-box;">Documented proof of enrolment in a related electrical course from your educational institution.</li></ul>Additionally, you can submit an offer letter, employment contract, or recent payslip from a reputable business within the industry. These documents validate your eligibility and expertise, completing the ECS Labourer Card application process.Verify and Stay UpdatedWhile every effort is made to provide accurate and up-to-date information, it is essential to verify the current application criteria by visiting the <a href="https://www.ecscard.org.uk/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ECS Website</a>. Keeping informed ensures that you meet all requirements and avoid any potential issues during the application process.ConclusionTaking the SPA Health &amp; Safety Core Day is a strategic move for anyone looking to advance their career in the electrical industry. Not only does it provide essential health and safety training, but it also qualifies you for the ECS Labourer Card, a vital certification for gaining employment and furthering your career.Enrol in the SPA Health &amp; Safety Core Day with MJ Electrical Training today. Equip yourself with the knowledge and certification needed to excel in the dynamic and rewarding field of electrical installations. Your journey to becoming a fully qualified electrician starts here!&nbsp;

ECS Card Health & Safety Course Dover

ECS Card Health & Safety Course Liverpool

Swansea

ONLINE STUDY + ONE DAY ZOOM SESSION
NO CLASSROOM ATTENDANCE REQUIRED


Awarding Body: Dual Accreditation - Open College Network (OCN Credit4Learning) & The CPD Certification Service (21 CPD Points)
 
Award Level: UK - Level Three (Advanced) + 21 CPD Points
Ireland Level Five (Advanced) + 21 CPD Points
 
Minimum Age: 18 (16 with parental consent)
 
Entry requirements: None. English Level 2 desirable
 
Training Locations: Study online + virtual classroom.
 
Practical Training: Includes FREE Practise@Home Phlebotomy Training Kit worth £79.99
This comprehensive 76 piece practical training kit includes mini-arm trainer, sharps container and all medical grade supplies needed as well as a step-by-step 30 minute training video.



PART 1 (THEORY) - STUDY AT HOME ONLINE :
Complete your theory training online in the comfort of your own home or at work. Stop/start when it suits you and complete the online modules at your own pace. Can be completed on multiple devices such as laptop, smart-phone, desktop computer, kindle, tablet etc.
 
PART 2 (PRACTICAL SESSIONS) - JOIN US FOR A COMPREHENSIVE ONE DAY ZOOM SESSION:
Full instructions will be provided. We will send you a completely free Practise@Home Phlebotomy Training Kit, including a mini-arm trainer, for you to keep. You will follow your tutor's on-screen instructions during your Zoom virtual classroom sessions as you learn and develop your phlebotomy skills. The procedures and practices taught online are exactly the same as you would learn in the classroom. At any time before or after your course you can watch our 30 minute step-by-step video to refresh your knowledge and continue to use your training kit to practice your skills.
 
(THIS COURSE AWARDS THE SAME NATIONALLY RECOGNISED AND DUALLY ACCREDITED QUALIFICATION AS OUR CLASSROOM AND HYBRID COURSE VERSIONS)


Please make sure you verify the precise dates and timings of your course when you receive your booking confirmation, as it may vary from the information provided above.


COURSE ITINERARY

 
A dually-accredited hybrid modular venepuncture course awarding an
OCN Accredited Level Three Certificate (3 credits) & 21 CPD Points


Nationally Recognised Qualification


Part 1 - online (eLearning) Part 2 - Virtual Classroom (1 Day Zoom)


PRE-COURSE
Home study pack - download and complete before the virtual classroom sessions

PART 1 - ONLINE
M01: Course Overview
M02: History, Definitions and Roles
M03: Work-flow cycles
M04: Professionalism
M05: Health & Safety
M06: Blood Collection Systems
M07: Anatomy & Physiology
M08: Blood Composition
M09: Using the equipment
M10: Performing the venepuncture - see Classroom Part 2
M11: Lab Tests and Bottle Types
M12: Analytical Errors
M13: Informal Quiz – answers
M14: Award – accredited certificates, value, application and overview. Job Opportunities.


PART 2 - VIRTUAL CLASSROOM (ONE DAY ZOOM SESSION)
M01: Introduction: Welcome, Introductions and Overview.
M10: Performing the venepuncture (theory overview)
P01: Practical Session 1 – Equipment familiarisation - "Tools of the Trade"
P02A: Practical Session 2A – Unpacking your training kit
P02B: Practical Session 2B - A look at the mini-arm trainer and associated equipment
P03: Practical Session 3 – Using the tourniquet and identifying a vein
P04: Practical Session 4 – Handling and assembling the equipment. Familiarisation and procedures including initial skill-set development
P05: Practical Session 5 - Further skill-set development and consolidation. Discussing needle types including winged infusion sets (butterfly needles)
P06A: Practical Session 6A – Performing the venepuncture on the mini-arm trainer. Palpating the vein, performing the venepuncture. Sample handling and labelling.
P06B: Practical Session 6B – Consolidating pre- and post-venepuncture procedures.
 
Additional support material can be downloaded as you progress through the course online.





ZOOM SESSION

VIRTUAL CLASSROOM (ZOOM) SESSIONS 
Our Virtual Classroom training course consists of online study (Part 1 - theory) and Virtual Classroom Zoom sessions (Part 2 - practical skill-set development)
You must complete your Part 1 online study before joining us for your Zoom session(s).
Once you have enrolled on this course you will be sent a free Practise@Home Training Kit, This is yours to keep and can be reused any many time as you wish after you have completed the course.
Your Booking Confirmation will include your Zoom log-in details.



Geopace Training

Allied Health

Allied Health Professions (AHP)

Blood Taking

Healthcare Workers

Venepuncture

Phlebotomist

Phlebotomy

Accredited Phlebotomy

Healthcare

Learn how to take blood ... train as a Phlebotomist

    Nationally Recognised Qualification

    No previous experience or qualifications needed

    OCN Accredited - Level 3 (advanced)

    CPD Accredited (The CPD Certification Service)

    Covers all steps up to live blood draw

    Practise on artificial arm and fake blood!

    Basic understanding of English language required

    OPEN TO ALL APPLICANTS


Introduction to Phlebotomy Course (GPT003VC) - 1 DAY Virtual Classroom

Broxburn

C20M02 - Closed Circuit Television (CCTV) Foundation NSI NCP 104 / SSAIB SS2003Course DescriptionLearners will be introduced to the design, installation, commissioning, and maintenance of CCTV systems. This CPD provides a foundation knowledge of CCTV in relation to the requirements of NCP 104 (NSI) and SS2003 (SSAIB) Third Party Certification Bodies&#39; codes of practice, associated standards, and the various legal frameworks within the UK.Who should attend?All those involved in the specifying, design, installation, commissioning, and maintenance of CCTV Systems including specifiers, property managers, consultants, FM providers, security consultants, security installers.Course Content<ul style="color: rgb(63, 77, 90); box-sizing: border-box;" fr-original-style=" color: rgb(63, 77, 90);"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Enquiry</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Risk Assessment<ul style="font-size: initial; box-sizing: border-box;" fr-original-style="font-size: initial;"><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Operational Requirements</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Initial Design</li></ul></li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Quote</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Order</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">System Design Specification</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Installation</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Commissioning</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Handover</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Maintenance</li><li style="font-size: 16px; box-sizing: border-box;" fr-original-style="font-size: 16px;">Assessment<img src="https://images.cademy.co.uk/88d338d8-7dc4-4054-bf9e-401495774eee/5293624b-3258-4be0-b61f-1d0469f76c49/original.png" style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto; padding: 0px 1px; user-select: none; max-width: 100%; position: relative; box-sizing: border-box;" fr-original-style="width: 300px; display: block; vertical-align: top; margin: 5px auto; text-align: center; cursor: auto;" fr-original-class="fr-draggable"></li></ul>

C20M02 - Closed Circuit Television (CCTV) Foundation NSI NCP 104 / SSAIB SS2003
Course Description
Learners will be introduced to the design, installation, commissioning, and maintenance of CCTV systems. This CPD provides a foundation knowledge of CCTV in relation to the requirements of NCP 104 (NSI) and SS2003 (SSAIB) Third Party Certification Bodies' codes of practice, associated standards, and the various legal frameworks within the UK.
Who should attend?
All those involved in the specifying, design, installation, commissioning, and maintenance of CCTV Systems including specifiers, property managers, consultants, FM providers, security consultants, security installers.
Course Content
Enquiry
Risk AssessmentOperational RequirementsInitial Design
Quote
Order
System Design Specification
Installation
Commissioning
Handover
Maintenance



Ember Compliance

Professional Development

Engineer

CCTV

Continuous Professional Development (CPD)

Learners will be introduced to the design, installation, commissioning, and maintenance of CCTV systems. 

1512 Courses in Leeds

Total BGP for engineers

By Systems & Network Training

Linux for network engineers

By Systems & Network Training

UNIX system administration

By Systems & Network Training

Definitive Samba for engineers

By Systems & Network Training

Advanced Asterisk for Engineers

By Systems & Network Training

Essential Bluetooth

By Systems & Network Training

City & Guilds Level 2 Award in Entrant and Entry Controller for Confined Spaces (Medium Risk) - 6160-09

By Vp ESS Training

Complete ADO.NET for developers

By Systems & Network Training

DOMESTIC ELECTRICAL & SOLAR PV PACKAGE

By Tradeskills 4U

Total H.248 for Engineers

By Systems & Network Training

Search By Location