Cademy logoCademy Marketplace
  • Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

13 Educators providing Courses in Leeds

RegulationsLeeds
Driver Hire Training

driver hire training

3.5(41)

Bradford

All professional drivers of large goods vehicles must have a Driver Qualification Card, or DQC. There are a small number of exemptions, but essentially if you’re driving an HGV / LGV (licence categories C, C1, C1+E or C+E), then Driver CPC is a legal obligation. Professional PCV drivers with equivalent licences are also required to hold a DQC. Ongoing requirement Whether the initial DQC was gained as part of the drivers’ initial licence acquisition or by attending Driver CPC training courses, Driver CPC is an ongoing requirement. It is mandated by EU law (Directive 2003/59) and is designed to improve the knowledge and skills of drivers, as well as enhancing safety on our roads. The requirement for Driver CPC has not changed as a result of Brexit and there are no Government plans to do so – the relevant regulations pass into UK law. We believe that done well, Driver CPC training makes a positive contribution to the road transport industry, supporting the ongoing professional development of the drivers who make such a valuable contribution to our society. What must a driver do? Each DQC is valid for five years from the date of issue. This means that – unlike the 2014 deadline set when Driver CPC was introduced – each driver’s renewal date is unique to them. All drivers must undertake 35 hours’ periodic training before the end of the five years following the issue date on their DQC. If the training is not undertaken during that time, they will not be permitted to drive professionally until they have completed their 35 hours. The best way to ensure that a DQC doesn’t lapse is to carry out at least one day’s mandatory periodic training every year. To check your Driver Certificate of Professional Competence (Driver CPC) training record, visit the Driver & Vehicle Standards Agency website. The consequences If a driver is caught driving commercially without their Driver Qualification Card: Both driver and operator face fines of up to £1000 Driver suspended from driving commercially until training is completed Possible reduction in driving workforce, and operations adversely affected If operations are affected, your reputation with customers could be damaged If convicted, operator’s OCRS rating will drop to red Likely increase in insurance premiums What should I look for in Driver CPC training? When choosing your Driver CPC training provider, look for a wide range of relevant topics for drivers to choose from. This keeps the training useful, interesting and engaging. Look out for interactive elements, such as videos, quizzes and feedback sessions, which will benefit drivers, and add real value to the training.

Message
Mandate Systems

mandate systems

Liversedge

ndate Systems Ltd was formed in 1991, initially providing Written Schemes of Examination (WSE), and helping companies to comply with the Pressure Systems Safety Regulations (PSSR) set out by the Health and Safety Executive(HSE). Major expansion from 2000 enabled Mandate to take advantage of a gap in the market and progress to providing a full comprehensive solution for the pressure industry including consultation, auditing, technical manuals, statutory Pressure System examinations and training. From 2000 technological developments were made by moving away from paper to CD manuals, followed by progressing to emails in 2003, and online documentation by 2005. With over 25 years experience in compressed air, we have used our vast knowledge to be the frontrunner in new technologies, most recently moving reports from paper based to the cloud; Since 2017 all of the reports and documents produced by Mandate are now held in an innovative cloud-based system, streamlining and expediting the whole process. We have recently been thrilled to bring to the market PressureSafe – a new concept that is revolutionising the industry. Over time we have assisted over 5000 customers with PSSR and produced over 9000 Technical Pressure System Safety Manuals, including Written Schemes of Examination (WSE). With a multitude of customers ranging from the Ministry of Defence, Blue Chip PLC’s, and the Emergency services to small garages and dentists, we comprehensively produce WSE’s and carrying out legal examinations on many gases, mixed gas, compressed air and steam systems varying from 0.5bar +. Our dedicated team have many years of experience in this area of Health & Safety, with our head of engineering qualified to CEng and a member of the IMechE and IMarEST. With a complement of engineers having extensive knowledge of pressure system design, installation, commissioning and maintenance, we specialise in providing our customers with a service that we truly believe is second to none.

Message
Access Underwater

access underwater

Knaresborough

Access Underwater Ltd are a specialist underwater, diving and confined space contractor with almost 100 years combined commercial diving experience. Our company was born from a desire to centralise and coordinate the extensive diving, confined space, and restricted access experience and capabilities of our founding team members into a single solution provider. With a wealth of underwater; offshore construction, inspection, fabrication, engineering, military, emergency service and recreational/technical/cave diving/instructional backgrounds, combined with an extensive list of television/film credits, we believed that our clients would be better served by having one solution provider for their underwater access requirements, trained to the most exacting industry standards and practiced in almost every aquatic environment imaginable. We are registered with the HSE as a Diving Contractor and comply fully with The Diving at Work Approved Codes of Practice for Inshore Commercial and Media Diving (revised December 2014) and The Diving At Work Regulations 1997. About Access Underwater Despite clients often becoming overwhelmed with high running costs for their facilities, pool, plant and filming budgets, there is still a growing demand for professional and creative services to address outside-the-box, diving and restricted access projects. Clients require a dedicated service provider who can bring together all of their service, maintenance, access and creative requirements, make them affordable and offer cost-saving solutions. Utilising skill-sets forged from an impressive portfolio of projects including marine salvage, offshore oil and gas, wind farms, media productions and commercial pool facilities, Access Underwater is proud to offer such a service through our friendly, knowledgeable and highly-skilled personnel. Our team members bring their skills and expertise to your project honestly, affordably and with the highest regard for safety. We maintain a loyal, satisfied and expanding client base and look forward to discussing how we can help bring solutions to your project. Access Underwater’s Vision We aspire to be the gold standard* in our industry and want our clients to feel completely at ease knowing that they are in the safest, most professional hands. We enjoy close working relationships with all of our clients, who know we are completely dedicated to the successful completion of their projects and exploring all possibilities to deliver solutions that are right for them individually. From the very beginning, we have put honesty and complete transparency at the heart of what we do and continue to ensure that we are not only offering the best value for money but also sensible and intelligent solutions that will themselves pay dividends in the long-term. Access Underwater’s Gold Standard We noticed that during the design process with our logo, the abbreviation by which we have become known by our clients (AU) is the symbol for gold in the periodic table of elements. With this in mind, we decided immediately that the Vitruvian Diver in our logo would be crowned with a gold standard diving helmet to represent this gold standard of workmanship.

Message
12

Courses matching "Regulations"

Show all 140

CDM Regulations (Half Day) (On-Site)

4.9(182)

By You Can Do It .Training

Construction (Design & Management) Regulations 2015 - this law applies to the whole construction...

CDM Regulations (Half Day) (On-Site)
Delivered In-Person in Stoke on Trent or UK WideFlexible Dates
£640

FORS Virtual Reality Safe Urban Driving - Periodic 7 Hour CPC Course - Wakefield

By Total Compliance

Experience safer urban roads with our FORS Approved Virtual Reality Safe Urban Driving Training. Our immersive program empowers drivers to navigate bustling city streets alongside vulnerable road users, fostering a culture of road safety. With a seven-hour DCPC-approved course, participants gain valuable insights and skills for responsible driving. Invest in your drivers' safety and meet compliance requirements while protecting lives on the road. Elevate road safety with our innovative VR training. Learn more at www.totalcompliance.co.uk

FORS Virtual Reality Safe Urban Driving - Periodic 7 Hour CPC Course - Wakefield
Delivered In-Person in Wakefield + more
£110.75

Working At Height (Half Day) (On-Site)

4.9(182)

By You Can Do It .Training

This course covers all relevant health and safety laws including Working at Height Regulations 2005.

Working At Height (Half Day) (On-Site)
Delivered In-Person in Stoke on Trent or UK WideFlexible Dates
£640

Working at Height Module 2 - Safe Work at Height (General Operative)

By Vp ESS Training

This course is suitable for operatives required to Work at Height, and will give operatives a sound foundation on the requirements of the Work at Height Regulations 2005 and other relevant regulations. Also highlights the principles of how fall protection systems / equipment should be selected and used. This course will provide delegates with the knowledge and practical experience to enable them to work safely at height using a variety of basic systems and techniques. Book via our website @ ESS | Working at Height Module 2 - Safe Work at Height (General Operative) | Vp ESS (vp-ess.com) or via email at: esstrainingsales@vpplc.com or phone on: 0800 000 346

Working at Height Module 2 - Safe Work at Height (General Operative)
Delivered In-Person in Aberdeen + 9 more or UK WideFlexible Dates
£1,400

Manual Handling Awareness (On-Site)

4.9(182)

By You Can Do It .Training

This course will make delegates aware of the regulations regarding the moving and handling of...

Manual Handling Awareness (On-Site)
Delivered In-Person in Stoke on Trent or UK WideFlexible Dates
£532

Working at Height Module 1 - Safe Work at Height Awareness

By Vp ESS Training

This course is suitable for operatives required to Work at Height, providing a sound foundation on the requirements of the Work at Height Regulations 2005 in conjunction with a basic understanding of the types of fall protection systems and equipment available, its use, its limitations and unsafe practices. Suitable for individuals working around but not directly Working at Height. It allows the delegate to identify a working at height area and understand the procedures and regulations that control it. Book via our website @ ESS | Working at Height Module 1 - Safe Work at Height Awareness | Vp ESS (vp-ess.com) or via email at: esstrainingsales@vpplc.com or phone on: 0800 000 346

Working at Height Module 1 - Safe Work at Height Awareness
Delivered In-Person in Aberdeen + 9 more or UK WideFlexible Dates
£650

Slinger Banksman (On-Site)

4.9(182)

By You Can Do It .Training

This course covers relevant health and safety laws including Lifting Operations and Lifting...

Slinger Banksman (On-Site)
Delivered In-Person in Stoke on Trent or UK WideFlexible Dates
£695

18th Edition BS 7671

5.0(9)

By Optima Electrical Training

Even if you have completed a level 3 NVQ or a previous version of the wiring regulations, you still will have to prove you are conversant with the current standards. So therefore, keeping up to date with the latest wiring regulations satisfies these requirements. Although the BS 7671 can be a tricky book to navigate, our course has been designed in such a way as to ensure that you will have the knowledge to identify and find the topics covered in each of the relevant parts of the book. Further information can be found here: C&G 2382-22 BS7671 18th Edition — Optima Electrical Training (optima-ect.com)

18th Edition BS 7671
Delivered In-Person in London + 2 more or UK WideFlexible Dates
£495

Essential RFID

5.0(3)

By Systems & Network Training

RFID training course description This training course focuses on the technologies used in Radio Frequency Identification (RFID). What will you learn Describe the RFID architecture. Design RFID systems. Evaluate tag types. Recognise common RFID problems. RFID training course details Who will benefit: RFID technologists and system engineers. Prerequisites: RF fundamentals. Duration 2 days RFID training course contents What is RFID? Review of RF basics, what is RFID, RFID history, RFID base system architecture, frequency bands used by RFID, comparison with barcodes. RFID applications Supply chain, asset tracking, theft reduction, retail, access control, tolls. Tags Tag features, types of tag, passive and active, chips, read only, read write, affixing tags, selecting location to affix a tag, tag orientation and location, tag stacking, impact of rate of movement, tag data formats. Interrogators/readers Interrogation zones, interrogator types, antennas, read distance tests, multiple interrogators, synchronisation, dense interrogator environment issues. RFID peripherals. Standards and regulations Global regulatory requirements, regional regulatory requirements, ISO, ETSI, FCC, EPC, safety regulations/issues. Testing and troubleshooting Read rate problems, improperly tagged items, tag failure. RFID system design Antenna types, interference, antenna location and spacing, how many antennas? How many interrogators? tag types, grounding considerations, cabling, site diagrams.

Essential RFID
Delivered in Internationally or OnlineFlexible Dates
£2,477

Abrasive wheels

By Vp ESS Training

This course is designed to provide delegates that need to use abrasive wheels with an in-depth understanding of the requirements of the law, associated regulations and safe working practices when using abrasive wheels. Book via our website @ ESS | Training Courses | Vp ESS (vp-ess.com) or via email at: esstrainingsales@vpplc.com or phone on: 0800 000 346

Abrasive wheels
Delivered In-Person in Aberdeen + 9 more or UK WideFlexible Dates
£700
Show all 140

Search By Location