2 Educators providing Courses in Glasgow

The UK's first and only Level 4 qualification in Phlebotomy (equivalent to Ireland Level 6) FDSc (Foundation Degree Level) qualification Nationally Recognised certificate Dually accredited: Open College Network and CPD Covers both aspirated and evacuated systems Covers specialised blood collection systems & methods Classroom or Virtual Classroom learning options Comprehensive Training Kit is provided when booking our Virtual Classroom option (yours to keep) Complete your training from beginner to advanced level This course either follows on from our Introduction to Phlebotomy Course or can be combined with our introductory course as part of a course package (see below) Available to candidates who have completed (or are currently enrolled to complete) our Introduction to Phlebotomy Course or have previous phlebotomy practical experience.

In the modern work environment, managers and leaders must treat all colleagues with respect, including those who are challenging. Understanding the causes of difficult behaviour and being self-aware are crucial for creating a fair and inclusive workplace. This training session equips participants with the knowledge and communication tools to manage and overcome difficult behaviours effectively. This course is available to book for delivery in-house for your organisation and people exclusively, for either a half or full days training workshop. Prices are dependent on size of group ranging from a minimum of 4 to a maximum of 12 delegates. If you have a smaller number of delegates the Puritas 1:1 Leadership Coaching Programme is recommended.

Wanna Be The Trusted Waxer That Everyone Raves About? Who is this course for? ​ This Level 6 Depilation course is designed for anyone looking to have a career in the waxing industry and allows for progression on to Intimate Waxing and Advanced Waxing Skills. SQA Level 6 Award in Depilation provides knowledge and practical competence in health & safety within the salon and waxing and is regulated by SQA. The strategy for delivery of this unit is based upon a combination of online theory, and autonomous learning, workshops and practical sessions. This is delivered over 6 sessions. The final stage is an assessment which is submitted to SQA and finally your certificate will be issued. In this unit you will develop the skills required to remove hair from various areas on the face and body. You will gain knowledge of skin and hair structure, hair growth, causes of excess hair growth, hair types, contra-indications, special care conditions and contra-actions. Your practical skills will be developed by consulting with clients to develop treatment plans then preparing for and performing depilation treatments You will give clients homecare and aftercare advice and evaluate the effectiveness of the treatment in relation to technique and product selection. You will demonstrate knowledge of and adherence to relevant health and safety procedures; appearance which reflects organisational and industry standards and effective communication and consultation techniques. You will be assessed by answering structured questions in closed-book conditions to demonstrate your understanding of essential knowledge relating to depilation and will be observed carrying out depilation treatments on a minimum of six areas of the face and body on four different clients. Two of the performances must demonstrate multiple treatment areas. Treatment areas must include Face: upper lip and eyebrow; Body: underarms and bikini; Limbs: half leg and full leg. An assessor observation checklist must be used to provide evidence of performance supported by an accurately completed client consultation record completed by the learner. Practical performance must be carried out in a commercially acceptable time. Key areas of knowledge will be: Structures of the skin Hair structure Hair growth cycle Hair types Causes of excess hair growth Ingrown hairs Contra-indications Contra-actions Personal preparation Consultation techniques Reasons for consultation Client confidentiality Treatment planning Treatment environment preparation Equipment preparation Current waxing techniques — warm and hot wax Correct application and removal methods Product selection Skin sensitivity testing When and how to trim over-long hair Treatment areas: face, body, limbs Client preparation and positioning Client comfort and safety Waste disposal Commercial timing Time management Relevant current Health and safety legislation After care and homecare advice Methods used to evaluate the effectiveness of the depilation technique Self-evaluation ​​ Aspects of the Core Skill of Problem Solving, that is, Planning and Organising, Critical Thinking, and Reviewing and Evaluating, will be naturally developed as the depilation treatment is planned and safely undertaken. In planning the treatment you will identify and analyse a range of factors including suitable products, equipment and techniques to ensure the treatment meets the needs of each individual client. The treatment application must ensure client comfort and safety. Compliance with health and safety legislation is integral to achievement. Communication skills are not formally assessed however you will be expected to present oral and written communication to an acceptable professional standard. Oral communication skills will be developed in practical work with clients when interaction must be professional, sensitive and empathic. Communicating appropriate information to clients, explaining and reassuring during treatment sessions and giving aftercare advice and homecare advice will be an essential aspect of competence. You should be fully aware of a range of active listening techniques in order to relate and respond to others in the most appropriate and effective way, adapting language, register and style to suit their purpose and clientele. In addition to the specific vocational skills developed and assessed you will have the opportunity to develop generic skills which will enhance their employability skills profile, eg customer care skills, communication skills, time management. The SQA Level 6 Depliation is a practical and knowledge based qualification. It is aimed at equipping therapists with skills required for work in salons, destination/day spas and cruise ships. The units have been identified by employers as the most appropriate for working as a beauty therapist however, there are many CPD courses that can enhance the skills learnt and provide new techniques to ensure that the qualified therapist remains current and at the forefront of the industry

Overview This Leadership and Management course is essential reading for anyone wanting to improve their skills and reach their potential as a team leader or manager. The course is fully interactive and prompts you to assess your own leadership or management style and then learn how to develop it further. The course covers key topics such as effective communication, the importance of managing your time well, how to build solid relationships with your team, mental fitness and taking care of your own well-being, and how to better solve workplace problems.

Overview SEO help you define your most profitable focused audience and develop a bridge of communication that reach them directly, thereby positioning your product in the right and most efficient way. Using SEO skills targets increasing the number of visitors to a website and ensuring that the site appears high in ranking on the list of top page results returned by a search engine. SEO has become an increasingly sought-after skill for companies who want to keep track of their rankings in Google's organic search. To reach the customer nationally or internationally, SEO is the only way where we can reach a global market. It is very important to understand the techniques of SEO and how to use Digital Marketing in a more efficient way to reach every corner of the world.  This Specialized course will highlight the skills required to optimize website content for top SE Ranking. Through this course, you will learn the algorithms many search engines follow including Google Search. Specially designed with a lot of practical and live examples of advanced SEO techniques used by professionals you will gain a real-world skill to enhance your knowledge in Content Marketing, On-Off Page Optimization, followed by aligning SEO with overall business strategies. 

LTE Airside training course description This course provides a concise insight into the LTE airside. Key parts of the course are detailed looks at the air interface protocol stack, cell acquisition, transmission and reception of data and of he layer 1 procedures along with layer 2 procedures. What will you learn Explain the RF optimisation flowchart. Describe the importance of Reference Signal Received Power (RSRP). List many of the 3GPP recommended KPIs. Describe the concept of APN AMBR and UE AMBR within LTE. Describe the use of planning and optimisation computer tools. LTE Airside training course details Who will benefit: Anyone working with LTE. Prerequisites: Essential LTE Duration 2 days LTE Airside training course contents Introduction and review of LTE This section describes the requirements of LTE and key technical features, and reviews the system architecture. LTE Architecture, UE, E-UTRAN and EPC. Specifications. OFDMA, SC-FDMA and MIMO antennas This section describes the techniques used in the LTE air interface, notably orthogonal frequency division multiple access (OFDMA) and multiple input multiple output (MIMO) antennas. Communication techniques for fading multipath channels. OFDMA, FFT processing and cyclic prefix insertion. SC-FDMA in the LTE uplink. Multiple antenna techniques including transmit & receive diversity and spatial multiplexing. Introduction to the air interface This section covers the operation of the air interface, the channels that it uses, and the mapping to the time and frequency domains of OFDMA and SC-FDMA. Air interface protocol stack. Logical, transport and physical channels. Frame and slot structure, the resource grid. Resource element mapping of the physical channels and physical signals. LTE spectrum allocation. Cell acquisition This is the first of three sections covering the air interface physical layer. Here, we cover mobile procedures to start low-level communications with the cell, and base station transmission of the corresponding information. Primary/secondary synchronisation signals. Downlink reference signals. The master information block. Physical control format indicator channel. Organisation and transmission of the system information. Data transmission and reception In this section, we cover procedures used for data transmission and reception on the shared channels, and describe in detail the individual steps. Data transmission and reception on the uplink and downlink. Scheduling commands and grants on the PDCCH. DL-SCH and UL-SCH. Physical channel processing of the PDSCH and PUSCH. Hybrid ARQ indicators on the PHICH. Uplink control information on the PUCCH. Uplink demodulation and sounding reference signals. Additional physical layer procedure This section concludes our discussion of the air interface physical layer, by discussing a number of procedures that support its operation. Transmission of the physical random access channel. Contention and non-contention based random access procedures. Discontinuous transmission in idle and connected modes. Uplink power control and timing advance. Air interface layer 2 This section describes the architecture and operation of layer 2 of the air interface protocol stack. MAC protocol, interactions with the physical layer, use for scheduling. RLC protocol, transparent, unacknowledged and acknowledged modes. PDCP, including header compression, security functions and recovery from handover.

About this training course The smart meter or smart grid represents the next-generation electrical power system. This system uses information, data & communication technology within generation, delivery and consumption of electric energy. This 4-day course will equip you with the innovations that are shaping the power generation and distribution systems and will cover topics ranging from Smart Metering Architecture, Cybersecurity, Smart Grid Systems and Power Line Communications. Training Objectives By participating in this course, you will be able to: Comprehend the Smart Grid and Smart Meters architecture Review latest trends and challenges within the Smart Grid Technology Perform analysis on smart electronic meters Comply with regulatory and metering standards Recognize the importance of cybersecurity in smart grids Maximize efficiency, reliability, and longevity of your smart meters and equipment Gain valuable insights into power quality and harmonics Target Audience This course will greatly benefit the following groups but not limited to: Smart Grid managers and engineers Smart Meters managers and engineers Power plant managers Outage managers Maintenance and operations engineers Power regulatory personnel Transmission managers and engineers Distribution managers and engineers IT managers Renewable energy managers and engineers Course Level Basic or Foundation Intermediate Training Methods The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught in their own organization. Course Duration: 4 days in total (28 hours). Training Schedule 0830 - Registration 0900 - Start of training 1030 - Morning Break 1045 - Training recommences 1230 - Lunch Break 1330 - Training recommences 1515 - Evening break 1530 - Training recommences 1700 - End of Training The maximum number of participants allowed for this training course is 25. This course is also available through our Virtual Instructor Led Training (VILT) format. Trainer Your expert course leader is a professional engineer with extensive experience in power system studies, substation design field-testing, and EHS programs settings for Mining and Electrical Utilities sectors. He was formally the Engineering Manager at GE Canada in Ontario. He received his M.Sc. in electrical engineering from the University of New Brunswick and his MBA from Laurier School of Business in Waterloo. He has managed and executed more than 150 engineering projects on substation design EMF audits and power system studies and analyses, EMF audits and grounding audits, for major electrical utilities, mines, oil and gas, data centers, industrial and commercial facilities in Canada and the U.S. He is a certified professional engineer in the provinces of Ontario and Alberta. He has various IEEE publications, has served as a technical reviewer for many IEEE journals in power systems and control systems, and is the chair of the Industry Application Chapter (IAS) for IEEE Toronto Section. He remains a very active member for the IEEE substation committee of IEEE Std. 81 ground testing (WGE6) and IEEE Std. 80 ground design (WGD7). A certified electrical safety trainer by GE Corporate and a Canadian Standard Association (CSA) committee member at the mining advisory panel for electrical safety, he also taught many technical courses all over Canada to industrial customers, electrical consultants as well as to electrical utilities customers. Highlighted Projects: Various Power System Studies for 345/230 kV Stations - Nova Scotia Power (EMERA) RF audits for Telecom tower and antennas - Cogeco/Rogers Mobile Power System analysis - Powell Canada Structural/Geotechnical Design and upgrades - Oakville Hydro Underground Cables testing and sizing - Plan Group Relay programming and design optimization - Cenovus Canada Different Arc Flash Analysis and BESS Design - SNC Lavalin Environmental site assessment (ESA) Phase I/II for multiple stations - Ontario Electromagnetic compatibility (EMC) assessment for Toronto LRT expansion - MOSAIC Battery energy storage system (BESS) installation at City of London - Siemens Canada EMF audits for 500 kV Transmission Lines - Hydro One EMF audits for 500 kV Transmission Lines - Hydro Quebec AC interference for 138 kV line modeling and mitigations - HBMS Mine POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Trust building Pain point assessment Relationship history analysation Communication strengthening Ascertain main problem areas Closure on reoccurring arguments Intervention and mediation Emotional intelligence training Love language assessment Resolving fights Private assessments with each individual 3 couples therapy sessions https://relationshipsmdd.com/product/couples-trust-building-and-communication-therapy-package/

Gain a comprehensive understanding of immunisation and vaccines with our "Foundations of Immunisation and Vaccines" course. Designed for healthcare professionals, public health workers, and individuals interested in immunisation, this course covers vaccine development, administration, safety, and the role of vaccines in preventing infectious diseases.

ITIL® 4 Leader: Digital and IT Strategy: In-House Training The ITIL® 4 Leader: Digital and IT Strategy (DITS) is one of the two modules in the ITIL® 4 Strategic Leader (SL) certification scheme. The other module in the SL designation is the ITIL® 4 Strategist: Direct, Plan & Improve. Accredited training for the ITIL® 4 Strategic Leader modules is mandatory to enable full understanding of the core material. The ITIL ® 4 Digital and IT Strategy certification focuses on enabling business success through the creation of digital and IT strategies. The IT and Digital Strategy certification adds a new perspective to the ITIL suite and elevates the discussion around ITIL concepts to a strategic level among business leaders and aspiring leaders. The ITIL® 4 Digital and IT Strategy course is based on the ITIL® 4 Digital and IT Strategy exam specification from AXELOS. With the help of ITIL® 4 concepts and terminology, exercises, and examples included in the course, you will acquire relevant knowledge to pass the certification exam. The core learning material in the course is supported by interactive case study, discussions and activities. What You Will Learn The ITIL ® 4 Digital and IT Strategy course covers the content in relation to the following learning outcomes of the exam specification for ITIL ® 4 Digital and IT Strategy: Demonstrate the use of the ITIL guiding principles in Digital and IT Strategy decisions and activities Understand how to leverage digital strategy to react to digital disruption Understand the relationship between the concepts of Digital and IT Strategy, the service value system and the service value chain, and explain how to utilize them to create value Understand how an organization uses Digital and IT Strategy to remain viable in environments disrupted by digital technology Understand strategic approaches made possible by digital and information technology to achieve customer/market relevance and operational excellence Understand the risks and opportunities of Digital and IT Strategy Understand the steps and techniques involved in defining and advocating for a Digital and IT Strategy Understand how to implement a Digital and IT Strategy Key Concepts of Digital and IT Strategy Digital, Information, and Communication Technology Digital Transformation Services, Products, and Competitive Advantage Tiers of Strategy Business Models Operating Models Strategy and the Service Value System Opportunity and Demand Value Governance ITIL® Guiding Principles Continual Improvement ITIL® Practices What is Vision? Disruptions Vision Digital Disruptions Balanced Strategic Focus Positioning Tools for Digital Organizations Assignment 1: Digital Disruption and Digital Positioning Where Are We Now? Environmental Analysis Opportunity Analysis Digital Readiness Assessment How Do We Get There (Strategic Planning) Strategy Planning Financial Aspects of Digital and IT Strategy Business Models for Strategy Planning Portfolio Optimization How Do We Get There (Strategic Approaches) Strategic Approaches for Digital Organizations Strategic Approaches for Operational Excellence Strategic Approaches to Evolution Strategic Approaches to Social Responsibility and Sustainability Assignment 2: Strategic Approaches for Digital Organizations Take Action (Managing Strategic Initiatives) How Strategies are Implemented Coordinating Strategy and Strategic Initiatives Leading Digital Transformation Digital Leadership Assignment 3: Strategy Planning and Communication Did We Get There? (Measuring Strategy) Key Facts About Measurement Measuring a Strategy Instrumenting Strategy How Do We Keep the Momentum Going Long-Term Momentum: Ensuring Organizational Viability Short-Term Momentum: Parallel Operation Assignment: Digital Strategy in VUCA Environment Managing Innovation and Emerging Technologies Managing Innovation Formal Approach to Innovation Management Culture that Supports Innovation Approaches to Innovation Evaluating and Adopting Emerging Technology Managing Strategic Risk Risk Management Risk Identification Risk Posture Risk Treatment