Stoke on Trent

<h2>Course Details</h2>Overview of the CITB SSSTS Course
The CITB Site supervision safety training scheme (SSSTS) course is designed for those who have, or are about to acquire, supervisory responsibilities. The course covers all relevant legislation and other aspects which affect safe working in the building, construction and civil engineering industries. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures, and adequate communication to sustain a health and safety culture among the workforce. 

Entry requirements
Delegates should hold, or be about to hold, the role of a supervisor. Delegates must be competent in English at site supervisor level. 

Assessment
Assessment will be by an end of course examination and the trainer review. 

The examination paper is compulsory and consists of 25 questions, selected by CITB, covering all aspects of the course. The examination pass mark is 80% (24 out of 30). The paper consists of 22 multiple choice questions and three short written questions. There are four safety critical questions in each exam paper. The delegate must answer all four of these questions correctly to pass the exam. The multiple-choice questions are worth 1 point each, whereas written questions can score between 1-3 marks. 

Delegates will need to pass all three elements of the trainer review to gain a pass. 
The three elements of the trainer review are as follows: 
Exercise - overall, thinking about the delegate's performance in the group exercise, did they work well as part of the team?
Has the delegate actively engaged with the course and the group? 
Has the learner completed the toolbox talk?
All three elements will be either a pass (yes) or fail (no) and all three elements will need to achieve a pass for the delegate to pass this element of the course. 

Length of Course
This is a two-day course. Delegates are required to complete the full course (15 hours) to be eligible for certification. 

A natural progression from this course would be to attend the Site Management Safety Training Scheme (SMSTS) course. 

The SSSTS course is endorsed by Build UK and exceeds the standard set by CITB for construction supervisors training.

Course Details
Overview of the CITB SSSTS Course
The CITB Site supervision safety training scheme (SSSTS) course is designed for those who have, or are about to acquire, supervisory responsibilities. The course covers all relevant legislation and other aspects which affect safe working in the building, construction and civil engineering industries. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures, and adequate communication to sustain a health and safety culture among the workforce. Entry requirements
Delegates should hold, or be about to hold, the role of a supervisor. Delegates must be competent in English at site supervisor level. Assessment
Assessment will be by an end of course examination and the trainer review. The examination paper is compulsory and consists of 25 questions, selected by CITB, covering all aspects of the course. The examination pass mark is 80% (24 out of 30). The paper consists of 22 multiple choice questions and three short written questions. There are four safety critical questions in each exam paper. The delegate must answer all four of these questions correctly to pass the exam. The multiple-choice questions are worth 1 point each, whereas written questions can score between 1-3 marks. Delegates will need to pass all three elements of the trainer review to gain a pass. The three elements of the trainer review are as follows: Exercise - overall, thinking about the delegate's performance in the group exercise, did they work well as part of the team?
Has the delegate actively engaged with the course and the group? Has the learner completed the toolbox talk?
All three elements will be either a pass (yes) or fail (no) and all three elements will need to achieve a pass for the delegate to pass this element of the course. Length of Course
This is a two-day course. Delegates are required to complete the full course (15 hours) to be eligible for certification. A natural progression from this course would be to attend the Site Management Safety Training Scheme (SMSTS) course. The SSSTS course is endorsed by Build UK and exceeds the standard set by CITB for construction supervisors training. 

You Can Do It .Training

Site Safety Supervisor

Citb

CSCS (Construction Skills Certification Scheme)

Site Management Safety Training Scheme (SMSTS)

Scaffolding Supervisor

Site Supervisor

SSSTS

This course provides a basic understanding of health & safety duties and responsibilities...

CITB SSSTS (2 Days) (On-Site)

<h2>Course Details</h2>Overview of the CITB SMSTS Course
The CITB Site Managers Safety Training Scheme course is designed for site managers, or aspiring site managers. It is designed for those with responsibility for managing, monitoring, implementing and reporting in a construction environment.

Assessment
To successfully achieve the course, delegates must:
Complete all four core exercises
Pass the trainer review and
Pass the end of course exam

The trainer review provides a pass/fail based on the delegate's performance and engagement in the core exercises and engagement in the course overall. Details of this are provided in XA6T.

The paper consists of 25 questions, selected by CITB, covering all aspects of the course. The exam must be taken at the end of the course. Each
Exam paper has:
18 multiple choice questions (each worth one mark)
7 questions in multi-response or short written answer format (each worth two marks)

The exam pass mark is 81% (26 out of 32). The exam lasts for 35 minutes and must be completed within this time under exam conditions. Delegates are permitted to use the Construction site safety - The comprehensive guide (GE700) publication and the Construction site management delegate workbook (XA6) for the last 15 minutes of the exam.

Length of Course
This is a five-day course. Delegates are required to complete the full course (37.5 hours) to be eligible for certification.

The course covers relevant health, safety and environmental legislation affecting safe working in the building, construction and civil engineering industries. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures, and adequate communication to sustain a health and safety culture among the workforce. 

The SMSTS course is endorsed by Build UK as the standard training for all construction managers.

Course Details
Overview of the CITB SMSTS Course
The CITB Site Managers Safety Training Scheme course is designed for site managers, or aspiring site managers. It is designed for those with responsibility for managing, monitoring, implementing and reporting in a construction environment. Assessment
To successfully achieve the course, delegates must:
Complete all four core exercises
Pass the trainer review and
Pass the end of course exam The trainer review provides a pass/fail based on the delegate's performance and engagement in the core exercises and engagement in the course overall. Details of this are provided in XA6T. The paper consists of 25 questions, selected by CITB, covering all aspects of the course. The exam must be taken at the end of the course. Each
Exam paper has:
18 multiple choice questions (each worth one mark)
7 questions in multi-response or short written answer format (each worth two marks) The exam pass mark is 81% (26 out of 32). The exam lasts for 35 minutes and must be completed within this time under exam conditions. Delegates are permitted to use the Construction site safety - The comprehensive guide (GE700) publication and the Construction site management delegate workbook (XA6) for the last 15 minutes of the exam. Length of Course
This is a five-day course. Delegates are required to complete the full course (37.5 hours) to be eligible for certification. The course covers relevant health, safety and environmental legislation affecting safe working in the building, construction and civil engineering industries. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures, and adequate communication to sustain a health and safety culture among the workforce. The SMSTS course is endorsed by Build UK as the standard training for all construction managers. 

Construction Safety

Construction Design & Management (CDM)

Engineering Construction Industry Training (ECITB)

This course covers all relevant legislation affecting safe working in the building, construction...

CITB SMSTS (5 Days) (On-Site)

<h2>Course Details</h2>Overview of the CITB SMSTS-R Course
The CITB Site Managers Safety Training Scheme course is designed for delegates who have previously passed the full Site management safety training scheme (SMSTS) course or subsequent refresher course, and can provide proof of attendance. It aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course provides an opportunity to revisit the wide range of topics from the previous five-day course.

Entry requirements
The refresher course is only for delegates who have previously passed the five-day SMSTS or subsequent refresher course, and hold a valid SMSTS certificate. Evidence must be provided to the training provider of their eligibility.

Assessment
Successful completion of the course requires the delegate to pass an exam paper at the end of the course. 

The paper consists of 25 questions, selected by CITB, covering all aspects of the course. The exam paper must be taken at the end of the course. 
Each paper has: 
• 18 multiple choice questions (each worth one mark) 
• 7 questions in multi-response or short written answer format (each worth two marks)

The exam pass mark is 81% (26 out of 32). The exam lasts for 35 minutes and must be completed within this time under exam conditions. Delegates are permitted to use the Construction site safety - The comprehensive guide (GE700) publication for the last 15 minutes of the exam.

Length of Course
This is a two-day course. Delegates are required to complete the full course (15 hours) to be eligible for certification.

The course aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course provides an opportunity to revisit the wide range of topics from the previous five-day course.

Course Details
Overview of the CITB SMSTS-R Course
The CITB Site Managers Safety Training Scheme course is designed for delegates who have previously passed the full Site management safety training scheme (SMSTS) course or subsequent refresher course, and can provide proof of attendance. It aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course provides an opportunity to revisit the wide range of topics from the previous five-day course. Entry requirements
The refresher course is only for delegates who have previously passed the five-day SMSTS or subsequent refresher course, and hold a valid SMSTS certificate. Evidence must be provided to the training provider of their eligibility. Assessment
Successful completion of the course requires the delegate to pass an exam paper at the end of the course. The paper consists of 25 questions, selected by CITB, covering all aspects of the course. The exam paper must be taken at the end of the course. Each paper has: • 18 multiple choice questions (each worth one mark) • 7 questions in multi-response or short written answer format (each worth two marks) The exam pass mark is 81% (26 out of 32). The exam lasts for 35 minutes and must be completed within this time under exam conditions. Delegates are permitted to use the Construction site safety - The comprehensive guide (GE700) publication for the last 15 minutes of the exam. Length of Course
This is a two-day course. Delegates are required to complete the full course (15 hours) to be eligible for certification. The course aims to bring health and safety knowledge up-to-date, as well as giving a thorough overview of the legislative changes and their impact in the workplace. The course provides an opportunity to revisit the wide range of topics from the previous five-day course.


This course is for you if you have previously passed the Site Management Safety Training Scheme...

CITB SMSTS Refresher (2 Days) (On-Site)

<h2>Course Details</h2>Overview of the CITB TWSTC Course
This course complements the Temporary works coordinator training course (TWCTC) and is designed to provide training for those undertaking the role of temporary works supervisor (TWS), as defined in BS 5975:2019. The rationale for the TWSTC is to set and raise standards across the industry, and to enable a transferable knowledge base between employers to avoid unnecessary supplementary training.

Entry requirements
There are no formal entry requirements. However, delegates should hold, or be about to hold, the role of a temporary works supervisor. 

Assessment
The examination paper is compulsory and consists of 25 multiple-choice questions selected by CITB. 

It forms the basis of assessing whether a delegate has achieved a sufficient level of understanding to be awarded the Temporary works supervisor training course (TWSTC) certificate. 

The examination lasts for 30 minutes and must be completed within this time. 
The examination is open book.
The examination pass mark is 72%.

Length of Course
This course is designed to be completed in one day. Delegates are required to attend the full day (seven hours) and pass the end-of-course assessment to be eligible for certification. 

The natural progression from this course would be to the Temporary works coordinator training course (TWCTC) if duties allowed.

Course Details
Overview of the CITB TWSTC Course
This course complements the Temporary works coordinator training course (TWCTC) and is designed to provide training for those undertaking the role of temporary works supervisor (TWS), as defined in BS 5975:2019. The rationale for the TWSTC is to set and raise standards across the industry, and to enable a transferable knowledge base between employers to avoid unnecessary supplementary training. Entry requirements
There are no formal entry requirements. However, delegates should hold, or be about to hold, the role of a temporary works supervisor. Assessment
The examination paper is compulsory and consists of 25 multiple-choice questions selected by CITB. It forms the basis of assessing whether a delegate has achieved a sufficient level of understanding to be awarded the Temporary works supervisor training course (TWSTC) certificate. The examination lasts for 30 minutes and must be completed within this time. The examination is open book.
The examination pass mark is 72%. Length of Course
This course is designed to be completed in one day. Delegates are required to attend the full day (seven hours) and pass the end-of-course assessment to be eligible for certification. The natural progression from this course would be to the Temporary works coordinator training course (TWCTC) if duties allowed. 

Certificate of Completion of Training (CCT)

Certificate in Education & Training (CET)

This course is designed to provide training for those undertaking the role of temporary works...

CITB Temp Wks Sup'visor (1 Day)(On-Site)

<h2>Course Details</h2>Overview of the CITB TWCTC Course
The Temporary works coordinator training course (TWCTC) is designed to assist those on site who have responsibility for managing all forms of temporary works. The course has been designed to give confidence to senior management, and to ensure that those who engage contractors have an assessed standard of knowledge.This course will give the delegate a thorough knowledge of the temporary works coordinator (TWC) role. However, this does not make a delegate competent by itself. Competence requires other attributes, such as experience. 

Entry requirements
There are no formal entry requirements. However, delegates should hold, or be about to hold, the role of a TWC.

Assessment
Assessment will be by a multiple-choice examination at the end of the course. Delegates will also be expected to interact and participate during the course. 

The examination paper is compulsory and consists of 25 multiple-choice questions selected by CITB. It forms the basis of assessing whether a delegate has achieved a sufficient level of understanding to be awarded the Temporary works coordinator training course (TWCTC) certificate. 

The examination lasts for 30 minutes and must be completed within this time. 
The examination is open book.
The examination pass mark is 72%

Length of Course
This course is designed to be completed over two consecutive days. Delegates are required to attend both days (14 hours) and to pass the end-of-course assessment to be eligible for certification.

The natural progression from this course would be to either the Site management safety training scheme (SMSTS) or Director's role for health and safety (DRHS) course, where duties allow. 

The course is supported by a number of organisations, including the Temporary Works forum, CECA, Build UK, HSE and FMB. This enables transferability of the training within the industry. Temporary works are safety- and business-critical and require careful coordination. An accepted way of achieving this is through the adoption of the management process outlined in BS 5975:2019, which introduces the temporary works coordinator (TWC) as a key figure. This course explains the role and its overall management context. Temporary works on both smaller and larger sites can be high risk. Therefore, understanding the essentials of good risk and safety management, as outlined in BS 5975:2019, is relevant for projects of all sizes.

Course Details
Overview of the CITB TWCTC Course
The Temporary works coordinator training course (TWCTC) is designed to assist those on site who have responsibility for managing all forms of temporary works. The course has been designed to give confidence to senior management, and to ensure that those who engage contractors have an assessed standard of knowledge.This course will give the delegate a thorough knowledge of the temporary works coordinator (TWC) role. However, this does not make a delegate competent by itself. Competence requires other attributes, such as experience. Entry requirements
There are no formal entry requirements. However, delegates should hold, or be about to hold, the role of a TWC. Assessment
Assessment will be by a multiple-choice examination at the end of the course. Delegates will also be expected to interact and participate during the course. The examination paper is compulsory and consists of 25 multiple-choice questions selected by CITB. It forms the basis of assessing whether a delegate has achieved a sufficient level of understanding to be awarded the Temporary works coordinator training course (TWCTC) certificate. The examination lasts for 30 minutes and must be completed within this time. The examination is open book.
The examination pass mark is 72% Length of Course
This course is designed to be completed over two consecutive days. Delegates are required to attend both days (14 hours) and to pass the end-of-course assessment to be eligible for certification. The natural progression from this course would be to either the Site management safety training scheme (SMSTS) or Director's role for health and safety (DRHS) course, where duties allow. The course is supported by a number of organisations, including the Temporary Works forum, CECA, Build UK, HSE and FMB. This enables transferability of the training within the industry. Temporary works are safety- and business-critical and require careful coordination. An accepted way of achieving this is through the adoption of the management process outlined in BS 5975:2019, which introduces the temporary works coordinator (TWC) as a key figure. This course explains the role and its overall management context. Temporary works on both smaller and larger sites can be high risk. Therefore, understanding the essentials of good risk and safety management, as outlined in BS 5975:2019, is relevant for projects of all sizes. 

Certificate in Teaching Program (CTP)

This course is designed to assist those on site who have responsibility for managing all forms of...

CITB Temporary Works Coordinator On-Site

<h2>Course Details</h2>This course concentrates on the legal requirements for risk assessments in the organisation and the assessments and practical application. This course will give delegates the ability to carry out suitable and sufficient risk assessments.

ð Course Contents
Health and safety legislation
The management of health and safety at work regulations
Workplace accidents (causation)
The risk assessments process, understanding the key steps
Undertaking a practical risk assessment
Half day

Course Details
This course concentrates on the legal requirements for risk assessments in the organisation and the assessments and practical application. This course will give delegates the ability to carry out suitable and sufficient risk assessments. ð Course Contents
Health and safety legislation
The management of health and safety at work regulations
Workplace accidents (causation)
The risk assessments process, understanding the key steps
Undertaking a practical risk assessment
Half day

Health & Safety Awareness

Fire Risk Assessment

Workplace Health & Safety

Risk Assessment

Health & Safety At Work

This course concentrates on the legal requirements for risk assessments in the organisation and...

Risk Assess. & Method Statement On-Site

<h2>Course Details</h2>This highly-regarded course gives team leaders, supervisors and managers, the training they need to manage health and safety effectively. Delegates will learn about safety and risk management in the workplace. This course is created for up to 16 delegates.

ð Course content
Introduction and overview of the Health and Safety Law
Responsibilities of Supervisors and Managers
Assessing risks - definitions, factors to consider when carrying out a risk assessment
Risk control selection and the best methods to choose, including consideration of 'reasonably
practicable'

Course Details
This highly-regarded course gives team leaders, supervisors and managers, the training they need to manage health and safety effectively. Delegates will learn about safety and risk management in the workplace. This course is created for up to 16 delegates. ð Course content
Introduction and overview of the Health and Safety Law
Responsibilities of Supervisors and Managers
Assessing risks - definitions, factors to consider when carrying out a risk assessment
Risk control selection and the best methods to choose, including consideration of 'reasonably
practicable'

Occupational Health & Safety

Health & Safety

IOSH

This highly-regarded course gives team leaders, supervisors and managers, the training they need...

IOSH Managing Safely (On Site - 3 Days)

<h2>Course Details</h2>If no dates are available, please contact the office on 01782 438813 for our next dates. 

This course gives delegates a better understanding of safety and the assessment of risk when working within confined spaces, keeping individuals and those around them safe.

ð Course Contents
Understand the legislation applying to Confined Space work
Understand Hazards associated with Confined Space
Undertake Risk Assessments for Confined Space work
Develop Safe Systems of Work and Safe Methods of Work for Confined Space operations (Including Risk Assessments, Method Statements, Rescue Plans and Permit to Work)
Safety Person (Top Man) Responsibilities
Understand the mechanism of atmosphere testing and monitoring
Develop, install and maintain emergency plans and procedures
Maintain records and documents for Confined Space work

If no dates are available please call the team on 01782 438813 for available dates.

Course Details
If no dates are available, please contact the office on 01782 438813 for our next dates. This course gives delegates a better understanding of safety and the assessment of risk when working within confined spaces, keeping individuals and those around them safe. ð Course Contents
Understand the legislation applying to Confined Space work
Understand Hazards associated with Confined Space
Undertake Risk Assessments for Confined Space work
Develop Safe Systems of Work and Safe Methods of Work for Confined Space operations (Including Risk Assessments, Method Statements, Rescue Plans and Permit to Work)
Safety Person (Top Man) Responsibilities
Understand the mechanism of atmosphere testing and monitoring
Develop, install and maintain emergency plans and procedures
Maintain records and documents for Confined Space work If no dates are available please call the team on 01782 438813 for available dates.

First Aid At Work

Confined Space

Safety Awareness

This 1/2 day course gives delegates a better understanding of safety and the assessment of risk.

Confined Space Awareness (On-Site)

Northampton

Your course will be bespoke designed to meet your business needs. You can come to us, we can come to you or we can do it online. The choice is yours. 
All of our training is engaging as well as insightful. Please see details of our modules here. 


Beyond Theory: business training & coaching

Employee Engagement

Leadership Skills

Leadership Development

Professional Development

Institute of Leadership & Management (ILM)

Bespoke and One-off Courses and Workshops

Aberdeen

Castleford

Exeter

Glasgow

Heathrow

Manchester

Middlesbrough

Rainham

Southampton

Wellingborough

This ESS course is suitable for operatives who during the daily activities have to use gas monitors By the end of the course delegates will have an understanding of the correct operational procedures of gas monitors.Book via our website @ <a href="https://www.vp-ess.com/training/workplace-safety/gas-monitor-awareness/" id="isPasted" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">ESS | Training Courses | Vp ESS (vp-ess.com)</a>

This ESS course is suitable for operatives who during the daily activities have to use gas monitors By the end of the course delegates will have an understanding of the correct operational procedures of gas monitors.
Book via our website @ ESS | Training Courses | Vp ESS (vp-ess.com)
or via email at: esstrainingsales@vpplc.com
or phone on: 0800 000 346

Vp ESS Training

Gas Safety

Hazardous Areas

Height Safety

COSHH (Control of Substances Hazardous to Health)

This ESS course is suitable for operatives who during the daily activities have to use gas monitors By the end of the course delegates will have an understanding of the correct operational procedures of gas monitors.

Book via our website @ ESS | Training Courses | Vp ESS (vp-ess.com)

or via email at: esstrainingsales@vpplc.com

or phone on: 0800 000 346


Gas Monitor Awareness

Burnley

Would you like to develop further your practise of Reiki and learn about the Reiki Master symbol to be able to give advanced healing.This Reiki Master Practitioner level 3 course is for you if you would like to practise Reiki at a more advanced higher level. On this third level of Reiki training you are taught the Reiki Master symbol, and given a third empowerment or attunement.On this course you receive the fullest attention at this highest level of your Reiki training. I teach the course live online using Zoom. &nbsp;What does this course offer?<ul style="color: rgb(111, 114, 135); box-sizing: border-box;" fr-original-style=" color: rgb(111, 114, 135);"><li fr-original-style="" style="box-sizing: border-box;">How to use the Reiki Master symbol</li><li fr-original-style="" style="box-sizing: border-box;">Dai Ko Myo symbol and mantra</li><li fr-original-style="" style="box-sizing: border-box;">Attunement to Reiki level 3 energy</li><li fr-original-style="" style="box-sizing: border-box;">Traditional Japanese Reiki cleansing techniques</li><li fr-original-style="" style="box-sizing: border-box;">How to compile your own Reiki Lineage</li></ul>You will be initiated to the Reiki energy by a level 3 attunement and you will receive a full instruction manual and your course certificate will be awarded to you at the end of the course.On this course you receive the fullest attention at this highest level of your Reiki training. &nbsp;&nbsp;I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.This course is for those of you who have completed your level 2 Reiki course and would like to participate in the greatest gift of being able to help heal others with Reiki.If you have completed your Reiki training elsewhere you may still do this course, just simply bring your Reiki Level 2 certificate with you or details of where you completed your training.The course can be booked online here and you will receive instructions on how to access the course.Testimonials:- What other students who have attended my courses are sayingReiki Master Level 3 Course&ldquo;Margaret&rsquo;s courses are always well thought through, full of valuable information, and easy to follow.&rdquo; (Sarah W)&ldquo;I loved the relaxed pace of this class and how I can refer back to the course work materials whenever I need&rdquo; (Charlotte Q)&ldquo;Margaret is a wonderful reiki master and she has been a joy to learn from!&rdquo; (Mark T)

Would you like to develop further your practise of Reiki and learn about the Reiki Master symbol to be able to give advanced healing.
This Reiki Master Practitioner level 3 course is for you if you would like to practise Reiki at a more advanced higher level. On this third level of Reiki training you are taught the Reiki Master symbol, and given a third empowerment or attunement.
On this course you receive the fullest attention at this highest level of your Reiki training. I teach the course live online using Zoom. 
What does this course offer?
How to use the Reiki Master symbol
Dai Ko Myo symbol and mantra
Attunement to Reiki level 3 energy
Traditional Japanese Reiki cleansing techniques
How to compile your own Reiki Lineage
You will be initiated to the Reiki energy by a level 3 attunement and you will receive a full instruction manual and your course certificate will be awarded to you at the end of the course.
On this course you receive the fullest attention at this highest level of your Reiki training. 
I am a Reiki Master and teacher and I am one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course.
This course is for those of you who have completed your level 2 Reiki course and would like to participate in the greatest gift of being able to help heal others with Reiki.
If you have completed your Reiki training elsewhere you may still do this course, just simply bring your Reiki Level 2 certificate with you or details of where you completed your training.
The course can be booked online here and you will receive instructions on how to access the course.
Testimonials:- What other students who have attended my courses are saying
Reiki Master Level 3 Course
“Margaret’s courses are always well thought through, full of valuable information, and easy to follow.” (Sarah W)
“I loved the relaxed pace of this class and how I can refer back to the course work materials whenever I need” (Charlotte Q)
“Margaret is a wonderful reiki master and she has been a joy to learn from!” (Mark T)

Margaret Cook - Learn More About Reiki

Energy Healing

Reiki

Reiki Healer

I am a Reiki Teacher in Manchester and one of the few traditionally trained Reiki Masters in the UK who have been trained by international best-selling Reiki author Penelope Quest. My teaching methods use traditional Reiki techniques perfected over many years and you can be assured of my support during and after your course. I teach all three levels of Reiki courses, level 1 reiki. level 2 reiki and reiki master level 3

Reiki Master Practitioner Level 3 Online Course

General Admission

Chelmsford

Stratford

The Temporary Works Coordinator course will provide you with knowledge of the role. You will also gain a good understanding of risk management on a temporary works site.
Course Objectives:
By the end of the course, the delegate will gain knowledge of:
The need for a temporary works co-ordinator
The day-to-day roles of others involved in the temporary works procedures
Risk assessments and method statements
Best procedures as stated in BS 5975:2019
Course Content:
The content covered by the CITB course includes:
Various groups and types of Temporary Works
Case studies, procedures and policies of Temporary Works
BS5975:2019
CDM Regulations
Legislation and relevant Codes of Practice
Register for Temporary Works, design requirements and checks
Standard solutions and guidance design documents
Temporary works Co-ordinator – job role and responsibilities
Assessment:
To successfully complete the course, you will need to get 72% or above in the final exam. The trainer encourages the delegates to be interactive and involved throughout the training.
Certificate:
The certificate for this course is valid for 5 years.
Instructions
Please note all Temporary Works Coordinator courses with the venue “Remote Learning” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

SMC Safety Solutions

Temporary Works Coordinator (TWC) - 2 Day Course

This five-day course is a must for anyone who is considering or already working in a role with site manager responsibilities. This course covers all relevant legislation affecting safe working in the building, construction, and civil engineering industries.
It is endorsed by Build UK as the standard training for all construction managers.
Aims
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
To give a clear understanding of health, safety, welfare, and environmental legislation that affects your management role. It highlights the need for risk assessment in the workplace, the implementation of the necessary control measures and adequate communication to sustain a health and safety culture within the workforce.
Course Content
• Health, safety, welfare and environmental legislation affecting your daily work
• New guidance and industry best practice
• Duties and responsibilities with regards to health, safety, welfare, and the environment
• Safe working
Prerequisites
This course is for you if you’re considering, or already have management responsibilities for planning, organising, monitoring, controlling and administering groups of staff e.g. site manager.
Assessment
At the end of this course, all delegates will have a clear understanding of controlling health and safety on site from a manager’s role.
Certificate
The certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all site managers.
To remain certified in this area, you will need to take a refresher course before the expiry date on your certificate, otherwise the full course will need to be retaken.
Instructions
Please note all online Site Management Safety Training Scheme courses with the venue “Online” will be delivered by a tutor over a video call.
This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course.
Further attendee information will be sent in a separate email, please check your inbox.

Site Management Safety Training Scheme (SMSTS) 5 day course

Course price is £125.00 + Vat @20% (£150 total) 
This Practical Heat Pump Surveying training, one-day CPD course attracts 5 CPD points, and is specifically designed for individuals and companies that want to train themselves and their staff on exactly how to carry out Heat Pump Site Surveying and show how to produce specific room-by-room heat loss calculations for use by installation companies. 
The course differs from our extensive 2-day Renewables Technical Surveying course in that this one-day session is about the practical aspects of surveying for heat pumps, as opposed to explaining how existing and low temperature heating systems work along with the methodology behind the surveying process. 
For attending this course we automatically assume that candidates will already have a basic/good knowledge of existing home heating systems and building construction processes combined with identifying varying building fabric elements.
This practical surveying course is primarily aimed at Energy Suppliers, Equipment Manufacturers, Renewables Installers, Domestic Energy Assessors, Retrofit Assessors, Retrofit Co-ordinators, Renewables sales staff and suitable for individuals with a reasonable level of knowledge in varying building structures, heating systems and varying renewable technologies. 
Note: This 1 day course is an interactive course you will be required to have your camera active for the duration of the day. 
During this training course we will provide the following:
Morning - Practical training on gathering Heat Pump Site Survey data using digital software
Afternoon - Practical training on digitally completing Heat Loss Calculations using digital software
The course will provide learners with intuitive guidance on how to procure common surveying software. Fully complete Heat Pump site surveys using digital floor planning software, and the efficient completion of digital survey form data. The course also runs through how to use common digital software packages to produce room-by-room heat loss calculations to send to your clients. 
Morning Session (Starts 0930hrs)
Brief introduction on the complete surveying process 'Start to Finish'
Using the correct surveying equipment for surveys
Using common floor planning software packages - A run through floor planning packages and their individual benefits
Note: All Learners are required to download and go through a basic user tutorial on how to use the floor planning software we plan to use prior to course attendance - Links are provided prior to the course start date. We do not make allowances for candidates that have not downloaded the floor planning software or attended the free tutorial on how to use it, if you are unable to use the software on a basic level you may be asked to leave the course and re-attend on a different day. There is no charge for re-attendance. 
Recording an MCS020 compliant Noise Level Assessment
Local planning restrictions specifically relating to the siting of Heat Pump outdoor units
Recording typical heating system pipework and other emitter pipework
Recording suitable locations for the Installation of Heat Pumps & Hot Water Cylinders
Getting started using digital floor planning software
Inputting form data for basic health & safety purposes, Building Construction Elements and current Heating System Elements
Course Tutorial (Video) - Using our preconfigured 360 degree walkthrough and detailed site measurements provided we will show you how to complete the survey form information and draw up a typical survey floorplan design from start to finish.
Short Q & A Session 
Learner Task - Using a second preconfigured 360 degree property walkthrough and additional detailed site measurements, using the downloaded digital floorplan software learners will carry out a detailed a Heat Pump Survey of their own, for use in producing room-by-room heat loss calculations - we guide learners step-by-step through the process.
Providing relevant site video evidence - We show you our site videos relating to the survey we have shown you and discuss how and explain why we provide good video evidence to clients
Short Q & A Session
Afternoon Session (Completes 16:30hrs) 
Using common Heat Loss software packages - We show learners a few of the heat loss software packages currently available before finally going through a sample of one of these packages to produce a detailed Heat Loss Report
Note: All Learners are required to download the 'Training version' of the Heat Loss software prior to course attendance - Links are provided prior to the course start date. We do not make allowances for candidates that have not downloaded the Heat Loss software, if you have not downloaded the heat loss software and are not ready to complete a heat loss calculation, you may be asked to leave the course and re-attend on a different day. There is no charge for re-attendance.
Using the 'Course Tutorial' as the basis for completing a Heat Loss Report we guide learners through how to use this information to formulate a room by room heat loss calculation using the heat loss software we have provided. 
Learner Task - Using the 'Learner Task' floorplan completed on the Morning Session we provide learners with guidance whilst they complete their own room by room heat loss calculation report using the heat loss software we have provided.
We finally provide information and guidance on how to save and send a completed heat loss report to clients.
Short Q & A Session
Available course dates are Monday 3rd Feb, Monday 10th Feb, Monday 17th Feb and Monday 24th Feb 
Course duration is one day 0930hrs to 1645hrs
10 Learner Spaces Available per course
note: a minimum of 5 learners is required for live courses  if there are less than 5 bookings we will be in touch to arrange a new date  



Building Metrix

Solar Installation

Surveying

Renewable Energy

Heat Pump

Building Surveying

Heat Pump Installation

Heating Engineer

This Renewables Technical Surveying training short two day course is specifically designed for individuals and companies that want to train themselves and their staff on exactly how to carry out Renewables Technical Site Surveying prior to any renewables installation measures, this includes for heating systems, solar systems and EV Charge point installations. 
The course is primarily aimed at Energy Suppliers, Equipment Manufacturers, Renewable Installers, Domestic Energy Assessors, Retrofit Assessors, Retrofit Co-ordinators, Renewables sales staff and suitable individuals with a basic level of knowledge in varying building structures, heating systems and varying renewable technologies.   


February 2025 - 1 Day Practical Heat Pump Surveying Course (5 CPD Hours)

Course Fee inclusive of VAT

Our Site Management Safety Training Scheme (SMSTS) refresher training courses, available both online and in-person, are designed for managers and individuals in positions of authority who completed their original SMSTS training program less than three years ago.

Aims
Participants will undertake a concise yet equally engaging training program covering all essential aspects of enforcing health and safety codes of practice at construction sites. Topics include in-depth discussions on risk assessments and effective methods for monitoring and managing industry-specific hazards.
Instructions
For online courses labeled “Remote Learning,” a tutor will deliver the training via video call.
All SMSTS courses are delivered and assessed in English. Participants must have a good command of the language to successfully complete the program.
Additional attendee information will be provided via email. Please ensure you check your inbox.


Site Management Safety Training Scheme (SMSTS) Refresher

Real Estate AnalystThe Real Estate Analyst course has been taught non-stop to global real estate firms over the last 25 years, and is without doubt the core financial modelling training in your career portfolio. Whether you have an upcoming financial modelling test for a new job or an APC exam, the Real Estate Analyst course is the choice for you.Create flexible real estate investment focused financial models in Excel. Case studies focus on core, core plus and value add property investments. This course shows you how to model income producing property with both annual and quarterly discounted cash flows, build rent functions, model costs and calculate returns. It also shows you how to interpret and analyse the results. On this course, you will&hellip;<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" fr-original-style="" style="box-sizing: border-box;">Learn how to structure an investment cash flow from first principles and how to value and appraise property investments</li><li value="2" fr-original-style="" style="box-sizing: border-box;">Build annual and quarterly discounted cash flows</li><li value="3" fr-original-style="" style="box-sizing: border-box;">Look in depth at modelling tenancy schedules: rent reviews, upward-only, break options, lease expiry</li><li value="4" fr-original-style="" style="box-sizing: border-box;">Build OPEX and CAPEX into your cash flow</li><li value="5" fr-original-style="" style="box-sizing: border-box;">Analyse risk using sensitivity tables and charts</li><li value="6" fr-original-style="" style="box-sizing: border-box;">Employ best practice and find solutions to common modelling problems</li></ul> Who will benefit from this course?<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" fr-original-style="" style="box-sizing: border-box;">Real Estate Investors</li><li value="2" fr-original-style="" style="box-sizing: border-box;">Surveyors</li><li value="3" fr-original-style="" style="box-sizing: border-box;">Portfolio Analysts</li><li value="4" fr-original-style="" style="box-sizing: border-box;">Investment Managers</li><li value="5" fr-original-style="" style="box-sizing: border-box;">Asset Managers</li><li value="6" fr-original-style="" style="box-sizing: border-box;">Real Estate professionals at any level with exposure to real estate financial models on a frequent basis</li><li value="7" fr-original-style="" style="box-sizing: border-box;">Mid-level to senior Real Estate Analysts who would like to start building their own real estate models quickly, rather than relying solely on coaching from existing team members</li><li value="8" fr-original-style="" style="box-sizing: border-box;">Junior or new Real Estate Analysts who would like to start building their own real estate models quickly, rather than relying solely on coaching from existing team members</li><li value="9" fr-original-style="" style="box-sizing: border-box;">APC candidates who would like the opportunity to consolidate their competencies by understanding how theory and variables interact within the precision context of a financial model.</li></ul> Day OneKnow how to build a property asset cash flow, analyse geared, and un-geared IRRs.<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" fr-original-style="" style="box-sizing: border-box;">Term &amp; Reversion and Layer Method Valuation (Intro to Excel)</li><li value="2" fr-original-style="" style="box-sizing: border-box;">Equivalent Yield (Solver, Scenario and Goal Seek functions)</li><li value="3" fr-original-style="" style="box-sizing: border-box;">Single-Let Discounted Cash Flow</li><li value="4" fr-original-style="" style="box-sizing: border-box;">Cash Flow inputs (Rents, Yields, Growth Rates, Target Returns)</li><li value="5" fr-original-style="" style="box-sizing: border-box;">Analysis and use of date series</li><li value="6" fr-original-style="" style="box-sizing: border-box;">Internal Rate of Return (IRR) and Net Present Value (NPV)</li><li value="7" fr-original-style="" style="box-sizing: border-box;">Comparing Value, Price and Worth</li><li value="8" fr-original-style="" style="box-sizing: border-box;">Adding borrowing and analysing geared returns</li><li value="9" fr-original-style="" style="box-sizing: border-box;">Introducing Rent Reviews and other &lsquo;events&rsquo; into cash flows</li><li value="10" fr-original-style="" style="box-sizing: border-box;">The &lsquo;Rent Function&rsquo; concept and Logic functions (IF,OR,AND)</li><li value="11" fr-original-style="" style="box-sizing: border-box;">Sensitivity analysis</li></ul> Day TwoKnow how to build a multi-let property cash flow and apply the concepts on a hypothetical case study.<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" fr-original-style="" style="box-sizing: border-box;">The &lsquo;Rent Function&rsquo; and Multi-let cash flows</li><li value="2" fr-original-style="" style="box-sizing: border-box;">The &lsquo;date problem&rsquo; and assumptions in property asset cash flows</li><li value="3" fr-original-style="" style="box-sizing: border-box;">Reducing the rent function, intermediate calculations and modelling theory</li><li value="4" fr-original-style="" style="box-sizing: border-box;">Modelling lease expiries, break clauses, voids, and upward only covenants</li><li value="5" fr-original-style="" style="box-sizing: border-box;">Incorporating time-varying rental growth rates</li><li value="6" fr-original-style="" style="box-sizing: border-box;">Analysing multi-let cash flows to see if the leases are sufficiently diversified</li><li value="7" fr-original-style="" style="box-sizing: border-box;">Further IRR analysis (XIRR, MIRR)</li></ul> Included in the Course<ul fr-original-style="" style="box-sizing: border-box;"><li value="1" fr-original-style="" style="box-sizing: border-box;">CPD Accredited Certificate &amp; LinkedIn Proficiency Badge</li><li value="2" id="isPasted" fr-original-style="" style="box-sizing: border-box;">Course Manual - In-Person Course attendees will receive a Physical Copy, Virtual Course attendees will receive a Virtual Copy and have the option to purchase a Hard Copy at an additional fee</li><li value="3" fr-original-style="" style="box-sizing: border-box;">Course Files</li><li value="4" fr-original-style="" style="box-sizing: border-box;">Online Learning Platform access - Further Learning Resources (Reading, Files and Videos)</li><li value="5" fr-original-style="" style="box-sizing: border-box;">Post Course Support - Two Months of Questions &amp; Answers, and One year of support is available for an additional fee</li></ul> For more information about the Real Estate Analyst such as course delivery methods, pricing and dates, please contact Sam on the Bayfield Training Sales team:E - s.musgrave@bayfieldtraining.comT - 01223 517851W - <a href="https://www.bayfieldtraining.com/" target="_blank" rel="nofollow noopener noreferrer ugc" title="https://www.bayfieldtraining.com/" data-airgap-id="125" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">www.bayfieldtraining.com</a>



Real Estate Analyst
The Real Estate Analyst course has been taught non-stop to global real estate firms over the last 25 years, and is without doubt the core financial modelling training in your career portfolio. Whether you have an upcoming financial modelling test for a new job or an APC exam, the Real Estate Analyst course is the choice for you.
Create flexible real estate investment focused financial models in Excel. Case studies focus on core, core plus and value add property investments. This course shows you how to model income producing property with both annual and quarterly discounted cash flows, build rent functions, model costs and calculate returns. It also shows you how to interpret and analyse the results.


On this course, you will…
Learn how to structure an investment cash flow from first principles and how to value and appraise property investments
Build annual and quarterly discounted cash flows
Look in depth at modelling tenancy schedules: rent reviews, upward-only, break options, lease expiry
Build OPEX and CAPEX into your cash flow
Analyse risk using sensitivity tables and charts
Employ best practice and find solutions to common modelling problems


Who will benefit from this course?
Real Estate Investors
Surveyors
Portfolio Analysts
Investment Managers
Asset Managers
Real Estate professionals at any level with exposure to real estate financial models on a frequent basis
Mid-level to senior Real Estate Analysts who would like to start building their own real estate models quickly, rather than relying solely on coaching from existing team members
Junior or new Real Estate Analysts who would like to start building their own real estate models quickly, rather than relying solely on coaching from existing team members
APC candidates who would like the opportunity to consolidate their competencies by understanding how theory and variables interact within the precision context of a financial model.


Day One
Know how to build a property asset cash flow, analyse geared, and un-geared IRRs.
Term & Reversion and Layer Method Valuation (Intro to Excel)
Equivalent Yield (Solver, Scenario and Goal Seek functions)
Single-Let Discounted Cash Flow
Cash Flow inputs (Rents, Yields, Growth Rates, Target Returns)
Analysis and use of date series
Internal Rate of Return (IRR) and Net Present Value (NPV)
Comparing Value, Price and Worth
Adding borrowing and analysing geared returns
Introducing Rent Reviews and other ‘events’ into cash flows
The ‘Rent Function’ concept and Logic functions (IF,OR,AND)
Sensitivity analysis


Day Two
Know how to build a multi-let property cash flow and apply the concepts on a hypothetical case study.
The ‘Rent Function’ and Multi-let cash flows
The ‘date problem’ and assumptions in property asset cash flows
Reducing the rent function, intermediate calculations and modelling theory
Modelling lease expiries, break clauses, voids, and upward only covenants
Incorporating time-varying rental growth rates
Analysing multi-let cash flows to see if the leases are sufficiently diversified
Further IRR analysis (XIRR, MIRR)


Included in the Course
CPD Accredited Certificate & LinkedIn Proficiency Badge
Course Manual - In-Person Course attendees will receive a Physical Copy, Virtual Course attendees will receive a Virtual Copy and have the option to purchase a Hard Copy at an additional fee
Course Files
Online Learning Platform access - Further Learning Resources (Reading, Files and Videos)
Post Course Support - Two Months of Questions & Answers, and One year of support is available for an additional fee


For more information about the Real Estate Analyst such as course delivery methods, pricing and dates, please contact Sam on the Bayfield Training Sales team:
E - s.musgrave@bayfieldtraining.com
T - 01223 517851
W - www.bayfieldtraining.com

Bayfield Training

Financial Modelling & Analysis

Financial Modelling

Property & Real Estate Photography

Continuous Professional Development (CPD)

The Real Estate Analyst course has been taught non-stop to global real estate firms over the last 25 years, and is without doubt the core financial modelling training in your career portfolio. Whether you have an upcoming financial modelling test for a new job or an APC exam, the Real Estate Analyst course is the choice for you.

Real Estate Analyst (Investment Cash Flow Modelling in Excel)

In-Person 

Virtual

Please note the dates for this course:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">27th Jan - 23rd Feb,&nbsp;2025 for self-paced study</li><li fr-original-style="" style="box-sizing: border-box;">24th Feb - 26th Feb, 2025 for the 3 live days</li><li fr-original-style="" style="box-sizing: border-box;">27th Jan - 19th March 2025 for online access to the video materials</li></ul>Early access to the lecture materials will be granted from&nbsp;13th January&nbsp;to those registering early.Prices include VAT.Please note that payment is required before your attendance at the live course.COURSE OVERVIEWThis comprehensive course delves into the principles of research design and explores all main quantitative evaluation methods: randomised experiments, instrumental variables, sharp and fuzzy regression discontinuity designs, regression methods, matching methods and longitudinal approaches such as before-after, difference-in-differences and synthetic controls.The lectures are thoughtfully structured to accommodate participants with diverse backgrounds. Each topic is presented at various levels, ensuring accessibility through intuitive explanations, optional formal derivations, in-depth discussions, and practical examples. The live classes offer a summary of each topic and provide an interactive platform for participants to ask questions and actively engage in guided practical sessions where they will apply each evaluation method to real-world data.By the end of this course, participants will have acquired a solid foundation in research design principles and possess practical skills to implement quantitative evaluation methods effectively.FORMAT OF THE COURSEThe Remote PEM Course offers a flexible learning experience through a combination of self-paced study and live online meetings. The course is structured into two parts:Part 1) Pre-recorded Lectures (21.5 hours): The pre-recorded lecture videos will be made available four weeks (6 weeks for early registrants) prior to the course start date, allowing participants to study the material at their own pace. While the videos remain accessible for an additional three weeks starting from the live sessions, it is recommended that participants complete the lectures before the live meetings, which are designed to focus on questions and practical exercises.Part 2)&nbsp;Live Sessions (19.5 hours): The live classes are spread over three days and consists of the following:<ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Summary and Recap: Barbara, the instructor, will provide a brief summary and recap of each topic covered in the pre-recorded lectures. Participants will have the opportunity to ask questions related to the specific topic being discussed.</li></ul><ul style="color: rgb(0, 0, 0); box-sizing: border-box;" fr-original-style=" color: rgb(0, 0, 0);"><li fr-original-style="" style="box-sizing: border-box;">Guided Practical Work: Participants will be given dedicated time to work on guided practical exercises either individually or in breakout rooms. These exercises will involve utilizing Stata or R software to implement each evaluation method to real data.</li><li fr-original-style="" style="box-sizing: border-box;">Live Demonstration: Barbara will conduct a live demonstration of the practical exercise using Stata. She will guide participants through the process, explaining each step and discussing the key aspects of the exercise.</li></ul>For more information please contact <a href="mailto:cemmapevent@ifs.org.uk" style="color: rgb(119, 119, 119); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(119, 119, 119);">cemmapevent@ifs.org.uk</a>

Please note the dates for this course:
27th Jan - 23rd Feb, 2025 for self-paced study
24th Feb - 26th Feb, 2025 for the 3 live days
27th Jan - 19th March 2025 for online access to the video materials
Early access to the lecture materials will be granted from 13th January to those registering early.
Prices include VAT.
Please note that payment is required before your attendance at the live course.
COURSE OVERVIEW
This comprehensive course delves into the principles of research design and explores all main quantitative evaluation methods: randomised experiments, instrumental variables, sharp and fuzzy regression discontinuity designs, regression methods, matching methods and longitudinal approaches such as before-after, difference-in-differences and synthetic controls.
The lectures are thoughtfully structured to accommodate participants with diverse backgrounds. Each topic is presented at various levels, ensuring accessibility through intuitive explanations, optional formal derivations, in-depth discussions, and practical examples. The live classes offer a summary of each topic and provide an interactive platform for participants to ask questions and actively engage in guided practical sessions where they will apply each evaluation method to real-world data.
By the end of this course, participants will have acquired a solid foundation in research design principles and possess practical skills to implement quantitative evaluation methods effectively.
FORMAT OF THE COURSE
The Remote PEM Course offers a flexible learning experience through a combination of self-paced study and live online meetings. The course is structured into two parts:
Part 1) Pre-recorded Lectures (21.5 hours): The pre-recorded lecture videos will be made available four weeks (6 weeks for early registrants) prior to the course start date, allowing participants to study the material at their own pace. While the videos remain accessible for an additional three weeks starting from the live sessions, it is recommended that participants complete the lectures before the live meetings, which are designed to focus on questions and practical exercises.
Part 2) Live Sessions (19.5 hours): The live classes are spread over three days and consists of the following:
Summary and Recap: Barbara, the instructor, will provide a brief summary and recap of each topic covered in the pre-recorded lectures. Participants will have the opportunity to ask questions related to the specific topic being discussed.
Guided Practical Work: Participants will be given dedicated time to work on guided practical exercises either individually or in breakout rooms. These exercises will involve utilizing Stata or R software to implement each evaluation method to real data.
Live Demonstration: Barbara will conduct a live demonstration of the practical exercise using Stata. She will guide participants through the process, explaining each step and discussing the key aspects of the exercise.
For more information please contact cemmapevent@ifs.org.uk

Institute for Fiscal Studies

The course covers research design principles and all main quantitative evaluation methods: randomised experiments, instrumental variables, sharp and fuzzy regression discontinuity designs, regression methods, matching methods and longitudinal methods (before-after, difference-in-differences and synthetic controls).

Remote Policy Evaluation Methods February 2025

Higher Education

Charity or Government

Other Delegates

<div data-hook="bgLayers" style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div data-mesh-id="comp-lmkln5ek1inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Attention: This course is delivered over 2&nbsp;full days. If you&#39;re interested in the same course but delivered over 4 half-days (3pm to 6:30pm London time, consecutive half-days excluding weekend), please click&nbsp;<a href="https://www.ask-sonia.com/training?layout=grid&cadpath=ask-sonia-limited%2Fofficial-brcgs-haccp-4-half-days" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; color: inherit; cursor: pointer; text-decoration: inherit;">here</a>. Thank you.This official BRCGS&nbsp;two-day course addresses one of the key requirements of the Global Standard for Food Safety Issue 8; the adoption and implementation of a hazard analysis and critical control points (HACCP) system. The course programme reflects the requirements of the standard with regard to the implementation of a HACCP system, and will introduce delegates to the BRCGS requirements, quality systems, HACCP and the background of HACCP, BRCGS and Codex.&nbsp;This course is part of the <a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" target="_blank" rel="noreferrer noopener" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">BRCGS Professional recognition programme</a>.At the end of the course, you will: &nbsp;<ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;">Be able to explain the benefits of HACCP and the BRCGS requirements in relation to HACCP</li><li fr-original-style="" style="box-sizing: border-box;">Be able to describe Codex Alimentarius principles of HACCP</li><li fr-original-style="" style="box-sizing: border-box;">Be able to describe the reasons HACCP may fail, and the most common BRCGS non-conformities related to HACCP</li><li fr-original-style="" style="box-sizing: border-box;">Be able to explain the importance of management commitment and prerequisite programmes</li><li fr-original-style="" style="box-sizing: border-box;">Be able to complete the preparatory stages for developing the HACCP plan</li><li fr-original-style="" style="box-sizing: border-box;">Be able to conduct a hazard analysis, determine critical control points, and develop a HACCP plan with monitoring, corrective action and verification activities. </li></ul>Note: This course is proposed as either 2x full days, or 4x half-days. Please carefully review the date &amp; time options before confirming your booking.</div></div></div>

 
Attention: This course is delivered over 2 full days. If you're interested in the same course but delivered over 4 half-days (3pm to 6:30pm London time, consecutive half-days excluding weekend), please click here. Thank you.
This official BRCGS two-day course addresses one of the key requirements of the Global Standard for Food Safety Issue 8; the adoption and implementation of a hazard analysis and critical control points (HACCP) system. The course programme reflects the requirements of the standard with regard to the implementation of a HACCP system, and will introduce delegates to the BRCGS requirements, quality systems, HACCP and the background of HACCP, BRCGS and Codex. 
This course is part of the BRCGS Professional recognition programme.
At the end of the course, you will: 
Be able to explain the benefits of HACCP and the BRCGS requirements in relation to HACCP
Be able to describe Codex Alimentarius principles of HACCP
Be able to describe the reasons HACCP may fail, and the most common BRCGS non-conformities related to HACCP
Be able to explain the importance of management commitment and prerequisite programmes
Be able to complete the preparatory stages for developing the HACCP plan
Be able to conduct a hazard analysis, determine critical control points, and develop a HACCP plan with monitoring, corrective action and verification activities.
Note: This course is proposed as either 2x full days, or 4x half-days. Please carefully review the date & time options before confirming your booking.

Ask Sonia Limited

Food Safety

HACCP

Official BRCGS Product Safety Management course: HACCP
Delivered online (Zoom) by a live BRCGS Approved Training Partner.
Exam and Certificate fee included in the price.

BRCGS HACCP (2 Days)

<div data-hook="bgLayers" style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><div data-mesh-id="comp-lmkln5ek1inlineContent-gridContainer" data-testid="mesh-container-content" fr-original-style="" style="box-sizing: border-box;"><div data-testid="richTextElement" fr-original-style="" style="box-sizing: border-box;">Attention: This course is delivered over 2&nbsp;full days. If you&#39;re interested in the same course but delivered over 4 half-days (3pm to 6:30pm London time, consecutive half-days excluding weekend), please click&nbsp;<a href="https://www.ask-sonia.com/training?layout=grid&cadpath=ask-sonia-limited%2Fofficial-brcgs-harpc-4-half-days" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; color: inherit; cursor: pointer; text-decoration: inherit;">here</a>. Thank you.This official BRCGS&nbsp;hazard analysis and risk-based preventive controls (HARPC) course will cover the similarities and differences between requirements of the BRCGS Standard for Food Safety and the Food Safety Modernization Act&#39;s (FSMA) Preventive Controls rule. The HARPC plan for any food manufacturing site is the core of their entire food safety program. HARPC encompasses far more in the way of food safety assessment and control than a traditional hazard analysis and critical control points (HACCP) plan.BRCGS Standards&#39; HARPC course is not a substitute for the Food and Drug Administration&#39;s (FDA) Preventive Controls course.This course is part of the <a href="http://demo-brcgs.wearesigma.com/training/brcgs-professional/about-the-programme/" target="_blank" rel="noreferrer noopener" style="color: inherit; user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: inherit;">BRCGS Professional recognition programme</a>.At the end of the course, you will:&nbsp;<ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;">Understand how the BRCGS Standard for Food Safety aligns with FSMA&rsquo;s Preventive Controls rule</li><li fr-original-style="" style="box-sizing: border-box;">Be able to explain the BRCGS Standards and HARPC requirements for development and management of a food safety plan</li><li fr-original-style="" style="box-sizing: border-box;">Have learned how to adapt a BRCGS Standards food safety management system (FSMS) to meet Preventive Controls regulation</li><li fr-original-style="" style="box-sizing: border-box;">Be able to review common non-conformities related to HACCP and HARPC found in BRCGS Standards audits</li><li fr-original-style="" style="box-sizing: border-box;">Be able to review risk analysis principles</li></ul><div id="isPasted" fr-original-style="" style="box-sizing: border-box;">Note: This course is proposed as either 2x full days, or 4x half-days. Please carefully review the date &amp; time options before confirming your booking.</div></div></div></div>

 
Attention: This course is delivered over 2 full days. If you're interested in the same course but delivered over 4 half-days (3pm to 6:30pm London time, consecutive half-days excluding weekend), please click here. Thank you.
This official BRCGS hazard analysis and risk-based preventive controls (HARPC) course will cover the similarities and differences between requirements of the BRCGS Standard for Food Safety and the Food Safety Modernization Act's (FSMA) Preventive Controls rule. The HARPC plan for any food manufacturing site is the core of their entire food safety program. HARPC encompasses far more in the way of food safety assessment and control than a traditional hazard analysis and critical control points (HACCP) plan.
BRCGS Standards' HARPC course is not a substitute for the Food and Drug Administration's (FDA) Preventive Controls course.
This course is part of the BRCGS Professional recognition programme.
At the end of the course, you will: 
Understand how the BRCGS Standard for Food Safety aligns with FSMA’s Preventive Controls rule
Be able to explain the BRCGS Standards and HARPC requirements for development and management of a food safety plan
Have learned how to adapt a BRCGS Standards food safety management system (FSMS) to meet Preventive Controls regulation
Be able to review common non-conformities related to HACCP and HARPC found in BRCGS Standards audits
Be able to review risk analysis principles
Note: This course is proposed as either 2x full days, or 4x half-days. Please carefully review the date & time options before confirming your booking.

Official BRCGS Product Safety Management course: HARPC
Delivered online (Zoom) by a live BRCGS Approved Training Partner.
Exam and Certificate fee included in the price.

BRCGS HARPC (2 Days)

Attention: This course is delivered over 2&nbsp;full days. If you&#39;re interested in the same course but delivered over 4 half-days (3pm to 6:30pm London time, consecutive half-days excluding weekend), please click&nbsp;<a href="https://www.ask-sonia.com/training?layout=grid&cadpath=ask-sonia-limited%2Fofficial-brcgs-hara-4-half-days" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; color: inherit; cursor: pointer; text-decoration: inherit;">here</a>. Thank you.By attending this official BRCGS&nbsp;two-day course delegates will gain the essential knowledge of the hazard analysis and risk assessment principles using exercises and activities to demonstrate the preparatory stages to the development of a HARA plan.&nbsp;To successfully complete the course, delegates will need to complete an exam to assess their understanding and application of the learning outcomes. &nbsp;By the end of this course, you will be able to:<ul style="color: rgb(var(--color_25)); box-sizing: border-box;" fr-original-style=" color: rgb(var(--color_25));"><li fr-original-style="" style="box-sizing: border-box;">Discuss the principles of Hazard Analysis and Risk Assessment (HARA)</li><li fr-original-style="" style="box-sizing: border-box;">Explain the key stages in the development of a HARA plan</li><li fr-original-style="" style="box-sizing: border-box;">Describe the role of Prerequisite programmes (PRPs)</li><li fr-original-style="" style="box-sizing: border-box;">Verify and validate the critical control points</li><li fr-original-style="" style="box-sizing: border-box;">Explain the benefits of a structured HARA plan</li></ul><div id="isPasted" fr-original-style="" style="box-sizing: border-box;">Note: This course is proposed as either 2x full days, or 4x half-days. Please carefully review the date &amp; time options before confirming your booking.</div>

Attention: This course is delivered over 2 full days. If you're interested in the same course but delivered over 4 half-days (3pm to 6:30pm London time, consecutive half-days excluding weekend), please click here. Thank you.
By attending this official BRCGS two-day course delegates will gain the essential knowledge of the hazard analysis and risk assessment principles using exercises and activities to demonstrate the preparatory stages to the development of a HARA plan. 
To successfully complete the course, delegates will need to complete an exam to assess their understanding and application of the learning outcomes. 
By the end of this course, you will be able to:
Discuss the principles of Hazard Analysis and Risk Assessment (HARA)
Explain the key stages in the development of a HARA plan
Describe the role of Prerequisite programmes (PRPs)
Verify and validate the critical control points
Explain the benefits of a structured HARA plan
Note: This course is proposed as either 2x full days, or 4x half-days. Please carefully review the date & time options before confirming your booking.

Official BRCGS Product Safety Management course: HARA
Delivered online (Zoom) by a live BRCGS Approved Training Partner.
Exam and Certificate fee included in the price.

1968 Courses in Coventry

CITB SSSTS (2 Days) (On-Site)

By You Can Do It .Training

CITB SMSTS (5 Days) (On-Site)

By You Can Do It .Training

CITB SMSTS Refresher (2 Days) (On-Site)

By You Can Do It .Training

CITB Temp Wks Sup'visor (1 Day)(On-Site)

By You Can Do It .Training

CITB Temporary Works Coordinator On-Site

By You Can Do It .Training

Risk Assess. & Method Statement On-Site

By You Can Do It .Training

IOSH Managing Safely (On Site - 3 Days)

By You Can Do It .Training

Confined Space Awareness (On-Site)

By You Can Do It .Training

Bespoke and One-off Courses and Workshops

By Beyond Theory: business training & coaching

Gas Monitor Awareness

By Vp ESS Training

Search By Location