• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

55 Courses in Cardiff

Legionella/Water Quality Risk Management – General Awareness

By HYDROP E.C.S.

Our Legionella/Water Quality Risk Management – General Awareness course offers a basic introduction to Legionnaires' disease Management and Control.

Legionella/Water Quality Risk Management – General Awareness
Delivered in Sutton Coldfield or UK Wide or OnlineFlexible Dates
Price on Enquiry

Commissioning of Combined Cycle Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

About this Course This 5 full-day course provides a comprehensive understanding of all the commissioning procedures for combined cycle power plants. The Commissioning Management System (CMS) of combined cycle power plants is covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report. The course provides also a thorough understanding of all the commissioning requirements for gas turbines, steam turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear and transformers. All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a combined cycle power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of combined cycle power plant systems, safety rules clearance certificates, procedure for the control and handling of defects, commissioning reports, operational testing, first fire, generator synchronization, performance testing, heat rate testing, emission testing, contract testing, CO2 concentration tests, electrical full-load rejection test, duct burner testing, partial load stability test, and reliability test. This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any combined cycle power plant equipment because it provides detailed pre-commissioning checks and tests, and detailed tests and commissioning procedures and instructions for every component in a combined cycle power plant. In addition, the seminar provides an in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each combined cycle power plant equipment, safety and precautions, safety rules clearance certificates, procedures for handling defects, and commissioning reports. Training Objectives Pre-commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in Combined Cycle Power Plants: Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in combined cycle power plants Commissioning Management System (CMS) of Combined Cycle Power Plants: Discover the benefits of the CMS of combined cycle power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report Commissioning Procedures and Instructions for Heat Recovery Steam Generators, Air Blow and Steam Blow of Steam and Gas Piping in Combined Cycle Power Plants: Learn about the commissioning procedures and instructions for heat recovery steam generators, chemical cleaning of heat recovery steam generators, air blow and gas blow of steam and gas piping in combined cycle power plants, safety valve setting and soot blowers Commissioning Procedures and Instructions for Gas Turbines and Steam Turbines: Gain a thorough understanding of all the commissioning procedures and instructions for gas and steam turbines and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging Commissioning Procedures and Instructions for Generator and Auxiliaries: Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and start-up of generators Commissioning Procedures and Instructions for Electrical Equipment: Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers and motors Operational Testing, Performance Testing, Heat Rate Testing, Emission Testing of Combine Cycle Power Plants: Gain a thorough understanding of operational testing, first fire, generator synchronization, performance testing, heat rate testing, emission testing, contract testing, CO2 concentration tests, electrical full-load rejection test, duct burner testing, partial load stability test, and reliability test of combined cycle power plants Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals Training Methods The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Commissioning of Combined Cycle Power Plants
Delivered in Internationally or OnlineFlexible Dates
Price on Enquiry

Building services and maintenance - introduction (In-House)

By The In House Training Company

To provide a fundamental understanding of building services in the context of: The working environment The success of the core business The health and safety of the occupants Operating cost and environmental impact The optimisation of cost and value Strategies for continuous improvement DAY ONE 1 Building services fundamentals The function of services in commercial buildings and their importance to the core businessElectrical servicesLightingHeatingVentilation and air conditioningLiftsWater Understanding IT and communication systems Practical exercises 2 The provision of comfort and safety Statutory requirementsHealth and safety legislationControl of contractorsRisk assessmentFire precautionsLegionella, sick building and other risks Business requirementsUnderstanding user requirementsMatching systems to business needs Practical exercises 3 Getting the design right What the FM needs to know about design and its procurementSuccessful space planningRelationship between services, space planning and designGetting the brief rightSupplier selection and management Practical exercises DAY TWO 4 Operation and maintenance Why maintain?Maintenance contractsInput and output specificationsResource optionsContracts - principal elementsTendering - key stepsSelection criteriaOperational criteriaMaintenance trends Performance-based service provisionInput and output specificationsKPIs and thresholdsRisk containmentValue-add opportunitiesPerformance contract strategy Practical exercises 5 Contingency planning Being ready for the unexpected Identifying and reducing riskInternal risksExternal risksIdentifying threats at your site Managing riskProtective systemsOccupier obligationsFire managementTesting Practical exercises 6 Commissioning services systems Physical commissioning Common problems Typical costs Commissioning stages Continuous commissioning Energy efficiency and the scope for environmental improvement Practical exercises 7 Satisfying the occupants Obtaining and responding to feedbackWhen to get feedbackWhyHowWhat to do with it Practical exercises 8 'Air time' Sharing experience and addressing specific issues of interest to participants Course review Close

Building services and maintenance - introduction (In-House)
Delivered in Harpenden or UK Wide or OnlineFlexible Dates
Price on Enquiry

NPORS Cat & Genny Training

5.0(3)

By Vally Plant Training

NPORS Cat And Genny Training or Cable Avoidance Training Prioritising the safety of underground utilities in construction and excavation projects is essential, necessitating comprehensive Cat and Genny training. In these sessions, workers receive education on operating Cable Avoidance Tools (CAT) and Signal Generators (Genny), Cat and Genny. The Cat and Genny use electromagnetic signals to detect buried cables and pipes before digging commences. Through comprehensive Cat and Genny training, workers become proficient in using CAT and Genny equipment, enabling them to accurately map out the locations of underground infrastructure. This proactive approach not only enhances on-site safety but also contributes to efficient project management by minimising the risk of accidental damage and costly delays. The aim of the NPORS Cat & Genny Training is to Provide training in Cable Avoidance and Service Location (Cat and Genny).The Cat and Genny Course is designed for any person working on the roads, setting out before a build, surveying and any others who may be excavating an area where pipes or cables may be buried underground. Price Match Promise Book with Confidence at Vally Plant Training At Vally Plant Training, we guarantee unbeatable value with our Price Match Promise. When you choose us for your Cat and Genny Course, you can book with confidence, knowing that we will not be beaten on price. If you find a lower price for the same NPORS Cat And Genny Course, we’ll match it—ensuring you receive top-quality training at the best possible rate. Your skills, our commitment—always at the best price. CAT & GENNY Training is designed for construction professionals and workers involved in excavation who need to operate Cable Avoidance Tools and Signal Generators. This training is ideal for individuals who have prior experience in excavation but require formal instruction on the safe and effective use of these specific tools to prevent accidental damage to underground services. Participants should have a basic understanding of excavation work, and if unsure of their eligibility for this advanced training, are encouraged to contact our training coordinators for more information. The CAT & GENNY training program is divided into two main sections: a theoretical module and a practical application module. The theory part covers the principles of operation, safety procedures, and risk assessment associated with underground utility detection. The practical module provides hands-on experience with both the Cable Avoidance Tool and Signal Generator, emphasising field techniques and problem-solving. Upon completion of the Cat And Genny course, participants will receive comprehensive revision materials to reinforce key concepts covered during the training. Introduction to CAT and Genny Training CAT and Genny , also referred to as CAT & Genny or CAT and Genny Training, are essential tools used in the construction and utility sectors to help locate and avoid underground cables and pipes during excavation works. CAT, which stands for Cable Avoidance Tool, is designed to detect signals naturally emitted by metallic services like electrical cables. Meanwhile, the Genny, short for Signal Generator, is used alongside the CAT to apply a signal to underground utilities that do not naturally emit detectable signals, such as telecoms or fibre . Understanding how to operate these tools is crucial for anyone involved in excavation. Proper use of CAT and Genny can prevent costly and dangerous errors, such as accidentally cutting through power lines or water pipes. The training not only focuses on how to use these devices effectively but also covers the best practices for scanning different types of terrain and interpreting the signals received. This ensures that workers can conduct their tasks safely and efficiently, minimising the risk of disruption and damage to underground services. What Is CAT and Genny Training? CAT and Genny Training provides comprehensive instruction on using Cable Avoidance Tools (CAT) and Signal Generators (Genny) to locate underground utilities safely. This training is critical to reduce the risk of accidentally striking underground assets during excavation, which can lead to severe safety hazards and financial losses. What Does Our CAT and Genny Training Course Cover? Our CAT and Genny Training Course covers: Basics of operating CAT and Genny equipment: Understanding the device controls, functions, and proper handling. Detection techniques: Learning how to detect different types of services, including electric, gas, and water. Practical applications: Hands-on training with both simulated and live environments to practice safe scanning and detection. Safety protocols: Emphasising safety procedures to prevent injuries and accidents. Legal compliance: Overview of health and safety regulations related to excavation work. Who Needs CAT and Genny Training? CAT and Genny Training is essential for anyone involved in excavation and groundworks. This includes utility workers, construction workers, civil engineers, site managers, and anyone else who may need to locate underground utilities as part of their job. The Cat And Genny Course is crucial for preventing damage to underground infrastructure like gas, water, telecoms and electrical lines, which can result in costly repairs and dangerous accidents. Do You Need to Be Trained to Use a CAT Scanner? Yes, training is highly recommended to use a CAT scanner effectively and safely. While not legally mandatory, proper training ensures that operators can accurately interpret the scanner’s signals and avoid potential hazards when working near underground utilities. Specialised Genny Tool Training Course Overview: The Genny Course is designed specifically to train users on the effective operation of the Genny tool, a crucial component of the CAT and Genny system used for detecting underground utilities. Key Learning Outcomes: → Understanding Genny Signals: Participants will learn how different signals can be applied and traced using the Genny, improving their ability to detect non-metallic utilities such as plastic water pipes. → Optimising Signal Strength: Training includes adjusting the Genny’s signal strength to suit various soil conditions and utility types, ensuring clearer and more accurate detections. Practical Applications: → Hands-on Practice: Extensive field practice sessions are included to give participants real-world experience in using the Genny effectively. →Troubleshooting Common Issues: Learners will be taught how to troubleshoot common operational issues to minimise downtime and enhance field productivity. Advanced Techniques: → Using Genny with CAT4: Instructions on how to integrate Genny use with the CAT4 detector for enhanced detection capabilities. → Interpreting and Mapping: Skills in interpreting the Genny’s output and using integrated mapping tools for accurate utility mapping. Safety Protocols: → Safe Operation Practices: Emphasis on safety measures to prevent accidents during the use of high-frequency signals. → Maintenance and Daily Checks: Training on regular maintenance routines and daily checks to keep the Genny in optimal working condition. Certification: → Qualification and Certification: Upon completion of the course, participants receive a certification that validates their proficiency in using the Genny tool according to industry standards. Scanning Techniques with CAT and Genny General Scanning Techniques: → Sweeping Motion: Always use a slow, steady sweeping motion with the CAT device. Begin scanning at least a few meters away from the expected area of the utilities to avoid missing any signals. → Directional Scans: Perform scans in multiple directions — both parallel and perpendicular to the expected direction of the utility lines to ensure thorough coverage. → Depth Perception: Adjust the depth settings based on preliminary scans to get an accurate depth estimate of buried utilities. Specific Use of Genny: → Direct Connection: When available, use the direct connection method with the Genny to induce a precise signal into a specific utility line. This is particularly useful in crowded areas with multiple utility lines. → Induction Mode: Use the Genny’s induction mode when direct connections are not possible. Ensure the Genny is placed on the ground vertically for optimal signal transmission. How to Use the CAT and Genny to Find Hidden Wires and Pipes Getting Ready: Check the Tools: Make sure the CAT and Genny are ready to use and have full batteries. Set Up the Genny: Pick the right sound for the Genny to use so it can find wires or pipes under the ground. If you can, connect the Genny to the pipe or wire with a special wire. Using the Genny: Stand it on the Ground: Put the Genny on the ground where you think there might be something hidden. Turn it on to send a beep into the ground. Connect it for Better Finding: Sometimes, you connect the Genny to something like a pipe for a clearer beep. Using the CAT: Start with Power Mode: Turn on the CAT and use the power mode to find beeps from wires that are on. Try Radio Mode: Next, switch to radio mode to hear beeps from metal things like pipes. Finally, Use Genny Signal Mode: Use this mode to hear the special beeps from your Genny to find hidden stuff like plastic pipes. How to Look Properly: Move Slowly: Walk slowly with the CAT over the area. If you move too fast, you might miss some beeps. Check in a Cross Pattern: First walk in one direction and then the other direction to make sure you cover all the area. Understanding What You Hear: Listen to the Beeps: A loud beep means you are close to a wire or pipe. If the beep sounds the same as you move, it probably means you found a wire or pipe. Staying Safe: Look Before You Dig: Always check by looking in the hole to make sure what the CAT and Genny found before you start digging. Keep the Tools Working Well: Make sure your tools are working right by checking them often. 500 mm from utilities; Always use insulated digging tools when close to underground utilities Frequently Asked Questions On Cat & Genny Training What is CAT and Genny training? CAT and Genny training provides instruction on how to use Cable Avoidance Tools (CAT) and Signal Generators (Genny) effectively to detect underground utilities and avoid accidental strikes during excavation. The training covers operational techniques, safety procedures, and the correct interpretation of the equipment’s signals. Why is CAT and Genny training important for construction workers? This Cat And Genny Course is crucial for safety and efficiency on construction sites. It helps workers avoid costly damages to underground utilities such as water pipes, electricity cables, and communication lines, which can lead to severe consequences including service outages, legal liabilities, and endangerment of worker and public safety. 3. How Long Is the Certification Valid? The certification received after completing CAT and Genny Training is generally valid for three to five years. After this period, a refresher course is recommended to keep up with new technologies and changing safety regulations. 4. Is CAT and Genny training required by law in the UK? While not specifically mandated by law, CAT and Genny training is strongly recommended under the UK Health and Safety Executive guidelines (HSE) to meet the legal duties under the Health and Safety at Work Act. It is considered best practice for anyone involved in excavation works. Cat & Genny Training Available 7 days a week to suit your business requirements. VPT have a team of friendly and approachable instructors, who have a wealth of knowledge of cable avoidance and the construction industry We have our own training centre conveniently located close to the M5 junction 9, In Tewkesbury. With its own purpose-built practical training area to simulate an actual working environment for the cat & genny course. Our Cable Avoidance training and test packages are priced to be competitive. Discounts are available for multiple bookings We can send a fully qualified NPORS cat & genny Tester to your site nationwide, to reduce the amount of time away from work Our more courses: Polish your abilities with our dedicated Lift Supervision Training, Slinger Signaller Training, Telehandler Training, Cat & Genny Training, Plant Loader Securer, Ride-On Road Roller, Abrasive Wheel Training, Lorry Loader Training and Scissor Lift Training sessions. Learn the safe and effective operation of these vital machines, crucial for construction and maintenance tasks. Elevate your skills and career prospects by enrolling in our comprehensive courses today.

NPORS Cat & Genny Training
Delivered In-Person in Tewkesbury or UK WideFlexible Dates
Price on Enquiry

Hair care tips for every season

By Silk Pearl

Changing seasons impact our hair in unique ways, from winter dryness to summer humidity. By adjusting your hair care routine with each season, you can keep your hair healthy, strong, and vibrant. Here’s a look at practical tips for maintaining beautiful hair all year round. Winter hair care tips In winter, cold air and indoor heating can strip moisture from hair, leaving it dry and prone to breakage. Protecting your hair from these harsh conditions is essential. Moisturize regularly Dry winter air can make hair feel rough and brittle. Use a moisturizing shampoo and conditioner to keep your hair hydrated, and consider using a leave-in conditioner for extra protection. This helps seal in moisture, making hair less prone to frizz and breakage. Limit heat styling Winter weather already dries out hair, so limit heat styling tools like blow dryers and straighteners, which can further strip moisture. If you need to use them, apply a heat protectant spray to help reduce damage. Cover your hair Cold weather can make hair more vulnerable to damage. When outside, consider wearing a hat or scarf to shield your hair from the cold, dry air. Opt for a silk or satin-lined hat to avoid friction that can lead to frizz. Spring hair care tips Spring is a time of renewal, and as humidity levels increase, you may notice changes in your hair’s texture and manageability. Here’s how to keep your hair looking fresh. Exfoliate your scalp Over winter, dead skin and product buildup can accumulate on the scalp. Use a gentle scalp scrub or exfoliating shampoo to refresh your scalp. This helps improve hair growth and keeps your scalp healthy. Adjust your conditioner As temperatures rise, you may not need as heavy a conditioner. Switching to a lighter conditioner can prevent hair from feeling weighed down, giving you more volume and bounce. Embrace natural styles Spring’s humidity can make it difficult to keep styles smooth and sleek. Embrace natural textures and styles that work with the humidity instead of fighting it. This helps reduce the need for heat styling, keeping your hair healthier. Summer hair care tips In summer, sun exposure and chlorine from swimming pools can damage hair, making it dry and prone to breakage. Protecting your hair from these elements is key to maintaining its health. Use UV protection The sun’s UV rays can weaken hair, making it more likely to break. Look for hair products that offer UV protection to shield your strands from sun damage. Wearing a hat also provides good protection and keeps your scalp safe from sunburn. Rinse after swimming If you swim in pools or the ocean, chlorine and salt can leave hair feeling dry and brittle. Rinse your hair with fresh water after swimming to remove these drying elements, and consider applying a leave-in conditioner afterward for extra moisture. Deep conditioning Summer heat can strip moisture from hair, making it look dull and feel rough. Use a deep conditioning treatment once a week to restore moisture and keep your hair soft and shiny. Consider a Mulberry silk pillowcase Summer heat can make hair more prone to frizz, especially when sleeping on traditional pillowcases. Switching to a Mulberry silk pillowcase can help reduce friction, prevent hair breakage, and keep hair smoother, especially in humid conditions. Silk pillowcases are gentle on hair and help keep it manageable throughout the summer months. Fall hair care tips Fall brings cooler temperatures and lower humidity, making hair feel dry. Preparing your hair for the cooler season helps prevent issues like split ends and dryness. Trim split ends After summer, hair may be damaged from sun exposure, chlorine, and saltwater. Trimming split ends at the start of fall helps keep your hair looking healthy and prevents further breakage as the air gets drier. Rehydrate your hair With cooler air, your hair may start to lose moisture again. Switch back to a more hydrating shampoo and conditioner, and consider using a hair mask once a week to lock in moisture. Avoid over-washing In fall, as temperatures drop, hair does not get as oily. Avoid over-washing your hair, as it can strip away natural oils that help protect it. Washing your hair two to three times a week is usually enough to keep it clean without causing dryness. Protect from static Cooler weather often brings static electricity, which can make hair frizzy and hard to manage. Using a leave-in conditioner or a few drops of hair oil can help reduce static, leaving hair smooth and manageable. Final thoughts Taking care of your hair throughout the year requires small adjustments to your routine to match the season. Following these tips, and using silk products, you can protect your hair from the elements, maintain its health, and enjoy beautiful hair every season. Incorporating products like a Mulberry silk pillowcase can also add extra benefits by reducing frizz and protecting your hair while you sleep. With these simple steps, you’ll keep your hair looking its best, no matter the time of year.

Hair care tips for every season
Delivered In-Person in Los Angeles or UK WideFlexible Dates
FREE
1...456

Educators matching "Water "

Show all 10
Water Babies at Foxfield School

water babies at foxfield school

5LE,

Swimming strengthens your little one's heart and lungs, as well as their arm, leg and neck muscles. All this helps with their coordination and balance. It even aids a healthy appetite and improves their sleeping pattern. Enhance the bond between you Enhance the bond between you Focused time in the water builds the bond between you and your baby, through skin-to-skin and eye contact. Swimming gives you that time to really connect, away from the demands of daily life. Teach them water safety Teach them water safety There's nothing more important than your child's safety. Teaching them vital safety skills from the get-go prevents them from developing a fear of the water later and gives them the knowledge to keep themselves safe, wherever they are. Give them life confidence Give them life confidence When your little one grasps a new skill, this sense of achievement gives them the confidence to try new things. So you'll soon see them flourish in and out of the water. Develop their social skills Develop their social skills The pool is the ideal place for your little one to develop their social interaction as they play with other babies in the class. It's also a brilliant way for you to meet other like-minded parents too! Accelerate their learning ability Accelerate their learning ability All the movements that your little one learns in the water strengthen those brain connections. Research has shown that the time your baby spends swimming can put them months ahead with mathematical reasoning and reading.

Crane Process Flow Technologies

crane process flow technologies

Torfaen

CRANE Co is a diversified manufacturer of highly engineered industrial products. Founded in 1855, Crane provides products and solutions to customers in the hydrocarbon processing, petrochemical, chemical, power generation, unattended payment, automated merchandising, aerospace, electronics, transportation and other markets. The Company has four business segments: Process Flow Technologies, Payment & Merchandising Technologies, Aerospace & Electronics and Engineered Materials. Crane has approximately 11,000 employees in the Americas, Europe, the Middle East, Asia and Australia. Crane Co. is traded on the New York Stock Exchange (NYSE:CR). For more information, visit www.craneco.com. Crane’s Process Flow Technologies segment is a global provider of highly engineered products and systems, serving chemical, petrochemical, pharmaceutical, water and wastewater, and general industrial markets. With proprietary technology and differentiated designs, we are Solving Customers’ Toughest Challenges in many of the harshest and most hazardous environments. EXECUTIVE OFFICES Crane ChemPharma & Energy 4526 Research Forest Drive, Suite 400 The Woodlands, TX 77381 USA QUICK LINKS INDUSTRY LINKS CERTIFICATES CRANE CHEMPHARMA & ENERGY LOGOS CRANE IN THE MEDIA OVERVIEW BROCHURES Copyright © 2022 Crane Co., CRANE ChemPharma & Energy Corp. All Rights Reserved. IMPORTANT: This site uses cookies to enhance your user experience. Continued use of this site indicates your consent. Privacy PolicyTerms & Conditions

Sullivan Upper Preparatory Department

sullivan upper preparatory department

9EP,

Sullivan Upper is a co-educational, inter-denominational, voluntary grammar school. The school was founded in 1877 and, since 1939, has occupied extensive grounds on the edge of Holywood. The school’s aims remain very much as they originally were: to provide the best possible education for all pupils, regardless of race, sex, background or religious denomination. Pupils come to Sullivan from a large catchment area, covering North Down, Ards and East Belfast. We provide for all our pupils as broad and balanced a curriculum as possible; we support it (as our motto lamh foisdineach an uachtar ‘the gentle hand foremost’ suggests) with a much-praised pastoral care system; and we extend it through a tremendous range of games, clubs, societies and other extracurricular activities. A truly dedicated team of teaching and non-teaching staff helps all of our pupils to develop their talents to the full and to prepare themselves effectively for the challenges and responsibilities of adult life. Our emphasis is strongly academic and we place a high value on academic achievement. Pupils entering the school at age 11 begin a 5-year course of study leading to GCSE examinations, in which they will be expected to enter for at least 9 subjects, and it is anticipated that the vast majority of those who take GCSE examinations will remain at school for a further 2 years to take GCE AS and Advanced Level courses before heading off to universities at home or across the water, including Oxford and Cambridge. Our proud record of tremendous results in public examinations shows that all pupils are empowered to realise their potential.

Adderley Nursery School

adderley nursery school

1HN,

Adderley is a very child-centred nursery, which means that children spend much of their day engaged in self-directed learning. The majority of the day is free-flow, meaning children choose to engage in a range of different activities, indoors and outdoors. Children engage in activities independently and with their friends, as well as taking part in adult facilitated activities that are planned from children's interests and developmental needs. We believe that at this young age children learn best through a play-based curriculum, with support from our experienced staff team who engage with children in their play to support social interaction, language development and further learning opportunities. Some key attributes we seek to develop in children include self-confidence, problem solving and independence. 2-4s Unlike many other settings, at Adderley our two to four year olds are all part of the same unit. They share the same space and access the same activities. The Nursery is led by qualified early years' teachers and experienced qualified Nursery Practitioners. Key Person Each child & family has a named key practitioner. This offers the opportunity for a special relationship to develop. The key practitioner builds a close relationship by acting as a companion for the child & being mindful to the needs of the child during each day. The key practitioner acts as a champion for child & parent. Sharing information and creating opportunities to talk with parents builds trust & partnership. Settling-in is a crucial time. Transitions Each child and family is unique. Before starting Nursery, we offer all children and families a pre-entry induction meeting at Nursery and sometimes a home visit. We have new children starting every term. We have a range of base areas that offer a place of security for children to explore the Nursery. The Loft Room and Green Room provision support our youngest children to make smooth transitions from home to Nursery. There are seamless internal transitions to Studio 1 and Studio 2 for older children. Studio 1 and Studio 2 offer continuity and progression. We work together to support the settling process. When parents feel comfortable in the setting it helps their children to settle. During the Summer Term we work closely with neighbouring primary schools to offer smooth transitions to Reception. Children leave with excellent primary school readiness. Rhythm of the Day Adderley feels like home. We create Rhythm in the Nursery through our daily routine. Some children arrive early for breakfast and stay for tea. These are nurturing, social times. For most children in Nursery the day begins with meeting & greeting by the key person. A group time with the key person takes place on entry to meet & plan learning (breathing in) (15 minutes). This is followed by a period of child-initiated play indoors & outdoors (breathing out & exploring the world) (90 minutes). A group time at end of the session to share food, reflect, share stories and singing (breathing in) (15 minutes). About the Nursery Rhythm also comes through personal care routines. Nappy changing, changing clothes, washing, eating, quiet/resting/sleeping times are learning and development times for key person and child. Children experience the seasons and feel connected to nature and its lifecycle. There is a planned yearly timetable for looking after the garden and visits to parks. There are unplanned spontaneous experiences connected to weather. Children participate in real experiences like shopping, gardening, cooking and caring for living creatures and plants Food and Nutrition We are passionate about fresh, healthy food that tastes great. The right nutrients can affect everyone's mood, behaviour, health, growth and even their ability to concentrate. Encouraging a well-balanced diet establishes healthy eating now and for the future. We offer hot meals that are brought onto site by specialist caterers in education establishments. The children also have access to a morning snack of fruit with water available throughout the day. We offer breakfast and tea to children who are with us for longer days. The children grow some of our food in the garden. Governing Body The Governing body plays a key role in overseeing the practice and ethos of the school. They provide challenge and support to the Executive Head teacher and leadership team. If you would like to be involved please ask at Reception. Annual Data At Adderley we track children's learning and development termly, seeking to ensure that children make good or better progress and continue to be stimulated and challenged by their nursery experiences. This information is shared with families at termly reviews. We also use this data to identify curriculum development priorities. Working with Parents We value parental input very highly. We are always looking for parents to join our Governing Body which s a way to be involved in the direction that Adderley takes moving forwards. Each term parents meet with their child's Key person and contribute to identifying 'next steps' for their child's learning and development. We encourage families to share children's learning experiences from home through the Tapestry documentation tool.