<div>
</div>
<section>
<div>
<h2><strong>About this Virtual Instructor Led Training (VILT)</strong></h2>
<p>Governments, regulators and energy companies are pursuing CO<sub>2</sub> storage technologies to meet their net-zero carbon commitments as well as targets set by the international Paris Agreement on climate change. For successfully executing Carbon Capture &amp; Storage (CCS) projects, various technical, operational, economic and environmental risks and associated stakeholders need to be managed.</p>
<p>In this <strong>5 half-day Virtual Instructor Led Training (VILT) course</strong>, the methods for managing risk in CCS projects are addressed <u>with a focus on CO<sub>2 </sub>injection and storage.</u> The VILT course will also demonstrate how to assess storage capacity of a potential CO<sub>2</sub> storage reservoir, model framing techniques, and well injectivity issues related to CO<sub>2</sub> injection. The potential leak paths will be discussed such as reservoir seals, leakage along faults and aspects of well integrity. In the VILT course, the design of a monitoring programme will also be discussed. The VILT course will be supported by various case studies.</p>
<p>This VILT course will cover the following modules:</p>
<ol>
<li>CCS projects in an international context</li>
<li>Site selection and site characterization</li>
<li>Storage capacity assessment</li>
<li>Injectivity assessment</li>
<li>Containment assessment</li>
<li>Measurement, monitoring &amp; verification</li>
</ol>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>On completion of this VILT course, participants will be able to:</p>
<ul>
<li>Uncover the functions and associated components required to capture, transport and store CO<sub>2</sub> in subsurface aquifers and (depleted) hydrocarbon reservoirs</li>
<li>Find a systematic and integrated approach to risk identification and assessment for CO<sub>2</sub> storage projects (maturation)</li>
<li>Appreciate the requirements (physics modelling) and uncertainties to assess the CO<sub>2</sub> storage capacity of a selected site.</li>
<li>Understand the challenges, data and methods to assess CO<sub>2</sub> well injectivity and well integrity</li>
<li>Identify the leakage pathways of a selected storage site, and understand the assessment methods and associated uncertainties</li>
<li>Learn how to design a monitoring program</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This VILT course is intended for all surface and subsurface engineers such as facility engineers, geologists, geophysicists, reservoir engineers, petrophysicists, production technologists/engineers, well engineers and geomechanical specialists. Also, (sub)surface team leads, project managers, business opportunity managers, decision executives, and technical risk assessment &amp; assurance specialists will benefit from this VILT course as it provides a common framework and workflow to develop a CCS project.</p>
<p><em><strong>For each class, it is highly recommended that a mix of disciplines mentioned above are represented to facilitate discussions from different perspectives.</strong></em></p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>This VILT course is built around cases in which teams work to identify and assess CO2 storage site issues using a systematic thought approach in this course. In addition, exercises are used to practise the aspects of the CCS risk assessment process. The VILT course provides a venue for discussion and sharing of good practices as well as opportunities to practise multi-discipline co-operation and facilitation.</p>
<p>Participants are encouraged to bring their own work issues and challenges and seek advice from the expert course leaders and other participants about all aspects of CCS.</p>
<p><strong>This VILT course will be delivered online in 5 half-day sessions comprising 4 hours per day, with 2 breaks of 10 minutes per day.</strong></p>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p><strong>Trainer 1:</strong></p>
<p>Your expert course leader has more than 36 years of experience in the oil &amp; gas industry with Shell. He gained broad experience in petroleum engineering, with expertise in integrated production systems from subsurface, wells and surface. He has had assignments in Production Technology, R&amp;D, Production Chemistry, Rock Mechanics and Reservoir Engineering cEOR, with a proven track record in technology screening, development and deployment, field development planning, conceptual well design and Production System Optimization (PSO) of gas and oil fields as well as preparing Well, Reservoir &amp; Facility Management (WRFM) strategies and plans. He had also worked on assignments in NAM and did fieldwork in Oman, Gabon and Shell Nigeria. He is a skilled workshop facilitator. He discovered his passion for teaching following an assignment in Shell Learning. During his time in Shell, he developed and taught technical courses to Shell professionals via blended learning.</p>
<p><strong>Trainer 2:</strong></p>
<p>Your second expert course leader has over 30 years of experience identifying, assessing and mitigating technical risks with Shell. The main focal point of his experience is in subsurface and Geomechanical risks. He is the the founding father of various innovations in how we assess risks by tool development (for bore hole stability, 3D geomechanical field evaluations and probabilistic assessment). He also developed an eye for people motivation, change management and facilitation. He was also responsible for the Geomechanical competence framework, and associated virtual and classroom training programme in Shell for 10 years.</p>
<p><strong>Trainer 3:</strong></p>
<p>Your third expert course leader has more than 30 years of experience in Shell, focusing on research and development in drilling and offshore systems. His areas of expertise is in project management, finance, business planning, investment, development studies and economics models. In 2021, he worked on a project that looked into the economic evaluation of P18A field complex for CO<sub>2</sub> storage. He has an MSc in Mechanical Engineering (M.E.) TU Delft Netherlands (Hons) and a baccalaureate from Erasmus University Rotterdam.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information about post training coaching support and fees applicable for this.</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Carbon Capture and Storage (CCS): Project Risks & How to Manage Them

Team of 10, pp

Normal Fee, pp

Harpenden

<p>M&amp;O of engineering plant and services is becoming more important to the success of the core business. To select the right M&amp;O technique for specific plant and equipment it is necessary to know what options are available, what they deliver and how they should be implemented. This course will help you consider options and techniques that provide best value based on that thorough understanding of the business need. M&amp;O will increasingly be required to demonstrate it is delivering the optimum of cost and value and the main purpose of the course is to show how this can be achieved.</p><p>Note: this is a purely indicative list of topics that can be covered. The content, duration, objectives and material used would all be adapted to match your specific requirements.</p>This course will help you:<ul><li>Determine what the business needs from the M&amp;O service</li><li>Determine the cost and value of the various M&amp;O options</li><li>Prepare and present the business case for the selected M&amp;O strategy</li><li>Introduce meaningful KPIs based on performance-based service by the M&amp;O provider</li><li>Undertake a review of current M&amp;O and make recommendations for improvement</li><li>Introduce energy and carbon management performance criteria in M&amp;O</li><li>Better deal with project risk and uncertainties</li><li>Motivate others to deliver a reliable and cost effective M&amp;O service</li></ul><section>
                    					<p><em>Note: this is a purely indicative list of topics that can be covered. The content, duration, objectives and material used would all be adapted to match your specific requirements.</em></p>			  <h3>1 What is maintenance and what is operation? - their relative importance to the business</h3> <h3>2 Comparison of the various maintenance options and techniques, including:</h3><ul><li>Planned preventative</li><li>Run to failure</li><li>Condition monitoring</li><li>Business focused</li><li>Business critical</li><li>Total productive</li><li>Reliability centred maintenance</li></ul> <h3>3 Forms of contracts and service, including:</h3><ul><li>Comprehensive</li><li>Input driven</li><li>Output driven</li><li>Limited replacement</li><li>Performance based M&amp;O</li></ul> <h3>4 Selecting the right options and making the business case</h3> <h3>5 Continuous commissioning as a tool for delivering best value</h3> <h3>6 Case studies</h3> 


                </section>

The In House Training Company

Operations Management

Computer Maintenance

Vehicle Maintenance

Plant Maintenance

Facility Management

Aircraft Maintenance

Maintenance and operation (M&O) of engineering plant and services (In-House)

<p>The importance of building services to the success of an organisation has never been greater and continues to grow. Developers and occupiers are becoming more aware of the contribution that building services make to the well being of occupants and hence their perception of the quality of the working environment. Those involved with the design, construction, maintenance and operation will increasingly be required to deliver building services that demonstrable contribution to the occupier's business.</p><p>Energy efficiency, carbon management and occupant satisfaction depend substantially on the way building services are designed, managed and operated. To optimise these aspects, an informed strategic approach is essential. Tried and tested techniques and processes are available that, when applied holistically, will deliver substantial benefits.</p><p>This course reviews best practice in the area and inspires participants to ensure that building services perform at their optimal level.</p>To provide a better understanding of how building services can be designed, managed and operated to:<ul><li>Maximise occupant comfort, satisfaction and wellbeing</li><li>Add value and contribute to the success of the business of the occupier</li><li>Improve health safety</li><li>Reduce operating cost, energy use, carbon emissions and environmental impact</li><li>Optimise cost and value</li><li>Provide strategies for continuous improvement and sustainable operation</li></ul><section>
                    <h3>1 Building services fundamentals</h3><ul><li>The function of services in commercial buildings and their importance to the core business</li></ul> <h3>2 Techniques and processes for optimising cost and value</h3><ul><li>Programmed operation evaluation</li><li>Continuous commissioning</li><li>Lifetime product management</li><li>Performance-based service</li><li>Energy efficiency and the scope for environmental improvement</li></ul> <h3>3 Making the business case and preparing the strategy</h3><ul><li>Motivating decision-makers</li><li>Empowering those who have to deliver the results</li><li>Managing business risk</li></ul> <h3>4 Strategy implementation and monitoring results</h3><ul><li>Ensuring that rich and robust feedback is available to support continuous improvement and<br />strategy enhancement<ul><li>When to get feedback</li><li>Why</li><li>How</li><li>What to do with it</li></ul></li></ul> <h3>5 Case histories and 'air time'</h3><ul><li>Sharing experience and addressing specific issues of interest to participants</li><li>Course review</li><li>Close</li></ul> 


                </section>

Service Design Courses (SDC)

Construction Design & Management (CDM)

Building Engineering Services Association (BESA)

Business Case Development

Building Management

Building services and maintenance - best-practice (In-House)

To provide a fundamental understanding of building services in the context of:<ul><li>The working environment</li><li>The success of the core business</li><li>The health and safety of the occupants</li><li>Operating cost and environmental impact</li><li>The optimisation of cost and value</li><li>Strategies for continuous improvement</li></ul><section>
                    <h3>DAY ONE</h3> <h3>1 Building services fundamentals</h3><ul><li>The function of services in commercial buildings and their importance to the core business<ul><li>Electrical services</li><li>Lighting</li><li>Heating</li><li>Ventilation and air conditioning</li><li>Lifts</li><li>Water</li></ul></li><li>Understanding IT and communication systems</li><li>Practical exercises</li></ul> <h3>2 The provision of comfort and safety</h3><ul><li>Statutory requirements<ul><li>Health and safety legislation</li><li>Control of contractors</li><li>Risk assessment</li><li>Fire precautions</li><li>Legionella, sick building and other risks</li></ul></li><li>Business requirements<ul><li>Understanding user requirements</li><li>Matching systems to business needs</li></ul></li><li>Practical exercises</li></ul> <h3>3 Getting the design right</h3><ul><li>What the FM needs to know about design and its procurement<ul><li>Successful space planning</li><li>Relationship between services, space planning and design</li><li>Getting the brief right</li><li>Supplier selection and management</li></ul></li><li>Practical exercises</li></ul>  <h3>DAY TWO</h3> <h3>4 Operation and maintenance</h3><ul><li>Why maintain?<ul><li>Maintenance contracts</li><li>Input and output specifications</li><li>Resource options</li><li>Contracts - principal elements</li><li>Tendering - key steps</li><li>Selection criteria</li><li>Operational criteria</li><li>Maintenance trends</li></ul></li><li>Performance-based service provision<ul><li>Input and output specifications</li><li>KPIs and thresholds</li><li>Risk containment</li><li>Value-add opportunities</li><li>Performance contract strategy</li></ul></li><li>Practical exercises</li></ul> <h3>5 Contingency planning</h3><ul><li>Being ready for the unexpected</li><li>Identifying and reducing risk<ul><li>Internal risks</li><li>External risks</li><li>Identifying threats at your site</li></ul></li><li>Managing risk<ul><li>Protective systems</li><li>Occupier obligations</li><li>Fire management</li><li>Testing</li></ul></li><li>Practical exercises</li></ul> <h3>6 Commissioning services systems</h3><ul><li>Physical commissioning</li><li>Common problems</li><li>Typical costs</li><li>Commissioning stages</li><li>Continuous commissioning</li><li>Energy efficiency and the scope for environmental improvement</li><li>Practical exercises</li></ul> <h3>7 Satisfying the occupants</h3><ul><li>Obtaining and responding to feedback<ul><li>When to get feedback</li><li>Why</li><li>How</li><li>What to do with it</li></ul></li><li>Practical exercises</li></ul> <h3>8 'Air time'</h3><ul><li>Sharing experience and addressing specific issues of interest to participants</li><li>Course review</li><li>Close</li></ul> 


                </section>

11 Educators providing Facility Management courses in London

nextgen learning

London, United Kingdom

Courses matching "Facility Management"

Carbon Capture and Storage (CCS): Project Risks & How to Manage Them

By EnergyEdge - Training for a Sustainable Energy Future

Maintenance and operation (M&O) of engineering plant and services (In-House)

By The In House Training Company

Building services and maintenance - best-practice (In-House)

By The In House Training Company

Building services and maintenance - introduction (In-House)

By The In House Training Company

Search By Location