9 Educators providing Design Engineer courses

City & Guilds 18th edition course with 2382-22 final exam only £234.00. Exams available every week across the UK, same day results, quick certificate, best prices..

Gain valuable insights into power systems with EnergyEdge's classroom training course. Take the first step towards expertise.

Enhance coal power plant efficiency with EnergyEdge's course on heat rate optimization. Join our classroom training for expert insights!

Enhance your skills with our EnergyEdge course on root cause analysis for boilers and steam cycle failures. Join us for a transformative learning experience!

Gain valuable insights into combustion engineering for coal-fired power plants with EnergyEdge's in-depth classroom training course.

Duration 3 Days 18 CPD hours This course is intended for The primary audience for this course is an IT, facilities or data centre operations professional working in and around the data centre and having the responsibility to achieve and improve high-availability and manageability of the data centre. Overview After completion of the course the participant will be able to:? Understand the design life cycle of data centres and the stages involved? Discuss the data centre requirements in great level of detail with vendors, suppliers and contractors to ensure that these requirements are met? Validate design plans, quotes and offers proposed by vendors/contractors? Understand redundancy levels for both the data centre design/setup and maintenance? Understand the various building considerations such as bullet proofing, mitigation of seismic activity, fire ratings and thermal stability? Understand how to install a raised floor that meets requirements, avoiding misalignment, level differences and leakage? Understand how to read a Single Line Electrical Diagram to identify and avoid the most common design issues? Choose the correct UPS and parallel configuration, learn and avoid classic parallel installation mistakes? Understand how to calculate battery banks, validate offered configurations to ensure they meet requirements? Understand what distance to keep to avoid EMF issues for human safety and equipment disturbances? Understand the fundamental cooling setup, CFM, Delta-T and other important factors? Understand contamination factors and limitations? Understand full details of fire suppression options, how to calculate gas content and verify installations? Understand how to measure data centre energy efficiency and how to improve it The course will bring participants to the level of a suitable sparring partner with suppliers. They will be able to verify offers provided by vendors for correctness, effectiveness and efficiency. Data Centre Design/Life Cycle Overview Overview of the phases of a data centre life cycle Planning, re-alignment and continuous improvement Standards and Rating Level Definitions Rating level history Difference between Uptime and TIA-942 Rating level definitions Redundancy options (N+1), 2N, 2(N+1) Concurrent Maintainability/Compartmentalisation Example configurations Substation and feed requirements Maintenance options Operational processes guidelines/standards Skill development Building Considerations Building location considerations Floor and hanging loads requirements Fire rating for walls and glass Blast protection Bullet proofing Forced entry protection Advanced Raised Floor & Suspended Ceiling Raised floor installation guidelines Techniques to install a proper and leveled raised access floor Common mistakes Choosing the right tiles and their locations Seismic-mitigating floor constructions Choosing the correct suspended ceiling Advanced Power Power infrastructure layout; Formulas which you should know for the data centre Single Line Electrical diagrams; how to read to ensure key components are present for protection Over current protection devices (MCB/MCCB/VCB/ACB/Fuses) definitions and what to use where Earth Leakage devices (RCB/RCD/ELCB/GFCI/ALCI/RCBO), definitions and what to use where Sizing of protective components Lightning strikes and surge protection devices (TVSS/SPD), how they operate, where to use and how to install Power cabling and cable run considerations PDU/DB setup and minimum requirements Generators; Generator types: Standy/Prime/Continuous Component make up and functions Fuel storage and calculation Paralleling of gen-sets Generator room/area requirements UPS Systems; Required specifications for UPS systems How to read data sheets and select the correct UPS Requirements for parallel configurations and avoid pitfalls such as single point of failures How parallel installation should be done, classic mistakes made by installers and how to avoid these Harmonic Filters; Active/Passive filters and their application Battery Banks; Battery bank terminology Designing battery banks, how to calculate, and double check the battery bank to be installed Battery charging pitfalls and ensuring the right charger is being installed and used Using parallel battery banks; how to properly install them, limitations and risks when using batteries in parallel How to test batteries correctly and make decisions on cell/block or string replacement Battery casing choices; ABS, V0, V1, V2 Alternative energy storage; flywheel, re-usable cell, compressed air UPS, etc. Advanced Electro Magnetic Fields Sources of EMF Difference between single, three phase and bus-bar EMF Options available to measure EMF and how to interpret the results from single-axes and composite measurements Guidance on safe distance for equipment and humans Calculation of EMF attenuation factor for shielding material permeability and saturation factors Advanced Cooling Important definitions; dry-bulb, wet-bulb, dew-point, RH, sensible and latent heat Psychometric chart and ASHRAE recommendations Environmental class definitions and thermal specifications Temperature/humidity measurements guideline Heat dissipation methods Altitude impact on temperature intake to ICT equipment Floor plan setup for effective cooling Differences in tile surface and supporting structure and the air-flow performance impact Rack door construction and the flow performance impact Equipment Delta-T and its impact Optimising air flow Thermal units conversions Calculations for air volume displacement (CFM/CMH) Cooling capacity calculations Air-conditioning selection De- / humidifying options Air conditioning efficiency SHR impact on cost saving Efficiency indicator New cooling principle and techniques (Submerged, VSD/VRF/ECF/water- and air side economisers) Redundancy guidelines for air-conditioners avoiding classic misconceptions and mistakes for meeting ANSI/TIA-942 compliant designs Installation requirements Connections to fire panel and EPO Commissioning of air conditioners Set points and calibration CFD (Computational Fluid Dynamics) Advanced Fire Protection The fire triangle and elements to stop a fire Detection systems in detail (VESDA, VIEW, smoke sensors) Considerations for installation of sensors Proper testing of smoke sensors Water based systems i.e. deluge, wet-pipe, dry-pipe, pre-action and why most of them don't work and how to detect this Details on Inert and Halocarbon systems and how to select the correct system for your data centre How to calculate the gas content ensuring the appropriate level is installed to suppress the fire including safety considerations Other requirements for gas systems such as release times, hold times, pipe install requirements and other important factors Requirements for the fire detection panel Installation verification, methods, what to check and how New advanced fire suppression technologies Design and Install Scalable Networking Cabling System ANSI/TIA942 cabling structure topology ToR, EoR Design Intelligent patching systems Installation best practice such as routing, bending radius, separation from power, containment fill ratio, fiber link loss calculator, bonding and grounding requirement Standard for telecommunications labeling and administration Environmental Specifications and Contamination Control Acoustic noise effects, regulations, specifications and limits Data centre contaminations and classifications Measurements, standards and limits Preventive measures and avoidance Data Centre Efficiency Business drivers to go Green High-availability or Green? Green guidelines and standards How to measure it and what are acceptable numbers compared to the general industry PUE classes defined by Green Grid and issues with PUE Techniques for saving energy in all parts of the data centre i.e. application/system level, cooling, power distribution Mock ExamEXAM: Certified Data Centre Specialist

Take your understanding of electrical generators, excitation systems, and governing systems to the next level with EnergyEdge's classroom training. Enroll now and excel in your field!

Mep Design Engineering

Grasp solar design essentials in our Renewable Energy and Solar Design Course. Learn PV systems, simulations, and design tools for a sustainable future.

Embark on an exhilarating journey into the captivating realm of Physics Phenomena with our comprehensive course package. Delve into the latest developments in the UK's scientific landscape, where breakthroughs in Basic Electricity, Ohm's Law, and Circuit Analysis are reshaping the way we understand and harness energy. This package covers everything from Particle Physics to the mysteries of the cosmos explored in Astronomy and the Big Bang Theory. Immerse yourself in the intricacies of Electrical circuit laws and Methods and grasp the fundamentals of Engineering Mechanics. Uncover the secrets of renewable energy and explore the dynamics of electrical power systems and high-voltage engineering. With modules spanning from Supercharger Automobile Engineering to Aerospace Engineering, this course package is your key to unlocking the secrets of the universe. This Physics Phenomena Package Consists of the following Premium courses: Course 01: Basic Electricity, Ohm's Law and Circuit Analysis Diploma Course 02: Particle Physics Course 03: Astronomy and the Big Bang Theory Course 04: Electrical Circuits Laws and Methods Course 05: Engineering Mechanics Course for Beginners Course 06: Renewable Energy Course 07: Electrical Engineering With Electric Circuits Course 08: Energy Engineering Certificate and Sustainable Energy Level 3 Course 09: Electrical Power System and High Voltage Engineering Course 10: Supercharger Automobile Engineering Course 11: Electrical Training Certificate, Fire Safety Measures and Legislation Course 12: Sustainable Energy Course 13: Flight Mechanics: Aircraft Certification Course 14: Electrical 3 Phase Power Transformers Fundamentals Course 15: Aerospace Engineering Course 16: Training Diploma in Electric and Hybrid Vehicles Engineering Course 17: Electricity - Theory and Safety Training Course 18: Digital Electric Circuits & Intelligent Electrical Devices Course 19: MATLAB Simulink for Electrical Power Engineering Course 20: Short Circuit Analysis for HV Three Phase Systems 10 Extraordinary Career Oriented courses that will assist you in reimagining your thriving techniques- Course 01: Effective Communication Skills Diploma Course 02: Business Networking Skills Course 03: Influencing and Negotiation Skills Course 04: Delegation Skills Training Course 05: Time Management Course 06: Leadership Skills Training Course 07: Decision Making and Critical Thinking Online Course Course 08: Emotional Intelligence and Social Management Diploma Course 09: Assertiveness Skills Course 10: Touch Typing Complete Training Diploma Learning Outcomes: Upon completion of this Diploma in Geotechnical Engineering - CPD Certified bundle, you should be able to: Master Basic Electricity and Circuit Analysis for practical applications. Explore Particle Physics and its implications in modern technology. Comprehend the intricacies of Astronomy, including the Big Bang Theory. Acquire proficiency in Electrical circuit laws and diverse methodologies. Demonstrate expertise in Renewable Energy and its sustainable applications. Gain a comprehensive understanding of Electrical Power Systems and High Voltage Engineering. In this dynamic learning experience, discover the intersection of theory and application, from short circuit analysis for HV three-phase systems to the intricate world of Digital Electric Circuits and Intelligent Electrical Devices. Harness the power of MATLAB Simulink for Electrical Power Engineering and gain expertise in Flight Mechanics for Aircraft Certification. Elevate your skills in Electric and Hybrid Vehicles Engineering and master the essentials of Fire Safety Measures and Legislation in Electrical Training. Join us on a transformative educational journey where knowledge meets innovation and expertise meets possibility. CPD 300 CPD hours / points Accredited by CPD Quality Standards Who is this course for? Enthusiasts seeking in-depth knowledge of Physics Phenomena. Professionals desiring to expand their expertise in Electrical Engineering. Individuals eager to explore diverse fields like Aerospace and Automotive Engineering. Please Note: Studyhub is a Compliance Central approved resale partner for Quality Licence Scheme Endorsed courses. Requirements To participate in this Physics Phenomena Package course, all you need is - A smart device A secure internet connection And a keen interest in Physics Phenomena Package Career path Aerospace Engineer: •50,000 - •70,000 Electrical Design Engineer: •35,000 - •50,000 Energy Consultant: •30,000 - •45,000 Renewable Energy Engineer: •40,000 - •60,000 Power Systems Engineer: •45,000 - •65,000 Particle Physicist: •40,000 - •60,000 Certificates CPD Accredited Certificate Digital certificate - Included CPD Accredited e-Certificate - Free CPD Accredited Hardcopy Certificate - Free Enrolment Letter - Free Student ID Card - Free