68 Educators providing Courses delivered Online

Duration 2 Days 12 CPD hours This course is intended for The primary audience for this course is any IT, facilities or data centre professional who works in and around the data centre and who has the responsibility to achieve and improve the availability and manageability of the data centre. Overview After completion of the course the participant will be able to:? Choose an optimum site for mission-critical data centre based on current and future needs? Describe all components that are important for high availability in a data centre and how to effectively setup the data centre? Name and apply the various industry standards? Describe the various technologies for UPS, fire suppression, cooling, monitoring systems, cabling standards, etc, and to select and apply them effectively to cost-efficiently enhance the high-availability of the data centre.? Review the electrical distribution system to avoid costly downtime? Enhance cooling capabilities and efficiency in the data centre by using existing and new techniques and technologies for the increased cooling requirements of the future? Design a highly reliable and scalable network architecture and learn how to ensure installers apply proper testing techniques? Create effective maintenance contracts with equipment suppliers ensuring the best return on investment? Setup effective data centre monitoring ensuring the right people get the right message? Ensure proper security measures, both procedural and technical, are established to safeguard your company's valuable information in the data centre The course will address how to setup and improve key aspects such as power, cooling, security, cabling, safety, etc., to ensure a high available data centre. It will also address key operations and maintenance aspects. The Data Centre, it?s Importance and Causes for DowntimeData Centre Standards and Best PracticesData Centre Location, Building and Construction Selecting appropriate sites and buildings and how to avoid pitfalls Various components of an effective data centre and supporting facilities setup Raised Floor/Suspended Ceiling Uniform, concentrated and rolling load definitions Applicable standards Raised Floor guidelines Signal Reference Grid, grounding of racks Disability act and regulations Suspended ceiling usage and requirements Light Standards Light fixture types and placement Emergency lighting, Emergency Power Supply (EPS) Power Infrastructure Power infrastructure layout from generation to rack level ATS and STS systems Redundancy levels and techniques Three-phase and single-phase usage Power distribution options within the computer room Power cabling versus bus bar trunking Bonding versus grounding Common Mode Noise and isolation transformers Distribution boards, form factors and IP-protection grades Power quality guidelines Real power versus apparent power How to size and calculate load in the data centre Generators Static and dynamic UPS systems, selection criteria, how they operate and energy efficiency option Battery types, correct selection and testing Thermo-graphics Electro Magnetic Fields Electrical fields and magnetic fields definitions and units of measurements Sources of EMF Effects of EMF on human health and equipment (H)EMP Standards EMF shielding solutions Equipment Racks Rack standards, properties and selection criteria Security considerations Power rail/strip options Cooling Infrastructure Temperature and humidity recommendations Cooling measurement units and conversion rates Sensible and latent heat definitions Differences between comfort and precision cooling Overview of different air conditioner technologies Raised floor versus non-raised floor cooling Placement of air conditioner units and limitations to be observed Supplemental cooling options Cold aisle/hot aisle containment Water Supply Importance of water supply and application areas Backup water supply techniques Designing a Scalable Network Infrastructure The importance of a Structured Cabling System Planning considerations Copper and Fiber cable technology and standards ANSI/TIA-942 Cabling hierarchy and recommendations Testing and verification SAN storage cabling Network redundancy Building-to-building connectivity Network monitoring system requirements Fire Suppression Standards for fire suppression Detection systems Various total flooding fire suppression techniques and systems, their benefits and disadvantages Handheld extinguishers Signage and safety Regulatory requirements and best practices Data Centre Monitoring Data centre monitoring requirements EMS versus BMS Water leak detection systems Notification options and considerations Operational Security and Safety Practices Data centre security layers Physical, infrastructure and organisational security Safety measures and essential signage Labelling Choosing a labelling scheme Recommended labelling practices Network labelling Documentation How to setup proper documentation Document management policies and procedures Cleaning Cleaning practices for the data centre MTBF/MTTR Standards and definitions Calculation models The ?real? value Maintenance Contracts/SLA/OLAEXAM: Certified Data Centre Professional Additional course details: Nexus Humans Certified Data Centre Professional (CDCP) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Certified Data Centre Professional (CDCP) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.

Duration 3 Days 18 CPD hours This course is intended for The primary audience for this course is an IT, facilities or data centre operations professional working in and around the data centre and having the responsibility to achieve and improve high-availability and manageability of the data centre. Overview After completion of the course the participant will be able to:? Understand the design life cycle of data centres and the stages involved? Discuss the data centre requirements in great level of detail with vendors, suppliers and contractors to ensure that these requirements are met? Validate design plans, quotes and offers proposed by vendors/contractors? Understand redundancy levels for both the data centre design/setup and maintenance? Understand the various building considerations such as bullet proofing, mitigation of seismic activity, fire ratings and thermal stability? Understand how to install a raised floor that meets requirements, avoiding misalignment, level differences and leakage? Understand how to read a Single Line Electrical Diagram to identify and avoid the most common design issues? Choose the correct UPS and parallel configuration, learn and avoid classic parallel installation mistakes? Understand how to calculate battery banks, validate offered configurations to ensure they meet requirements? Understand what distance to keep to avoid EMF issues for human safety and equipment disturbances? Understand the fundamental cooling setup, CFM, Delta-T and other important factors? Understand contamination factors and limitations? Understand full details of fire suppression options, how to calculate gas content and verify installations? Understand how to measure data centre energy efficiency and how to improve it The course will bring participants to the level of a suitable sparring partner with suppliers. They will be able to verify offers provided by vendors for correctness, effectiveness and efficiency. Data Centre Design/Life Cycle Overview Overview of the phases of a data centre life cycle Planning, re-alignment and continuous improvement Standards and Rating Level Definitions Rating level history Difference between Uptime and TIA-942 Rating level definitions Redundancy options (N+1), 2N, 2(N+1) Concurrent Maintainability/Compartmentalisation Example configurations Substation and feed requirements Maintenance options Operational processes guidelines/standards Skill development Building Considerations Building location considerations Floor and hanging loads requirements Fire rating for walls and glass Blast protection Bullet proofing Forced entry protection Advanced Raised Floor & Suspended Ceiling Raised floor installation guidelines Techniques to install a proper and leveled raised access floor Common mistakes Choosing the right tiles and their locations Seismic-mitigating floor constructions Choosing the correct suspended ceiling Advanced Power Power infrastructure layout; Formulas which you should know for the data centre Single Line Electrical diagrams; how to read to ensure key components are present for protection Over current protection devices (MCB/MCCB/VCB/ACB/Fuses) definitions and what to use where Earth Leakage devices (RCB/RCD/ELCB/GFCI/ALCI/RCBO), definitions and what to use where Sizing of protective components Lightning strikes and surge protection devices (TVSS/SPD), how they operate, where to use and how to install Power cabling and cable run considerations PDU/DB setup and minimum requirements Generators; Generator types: Standy/Prime/Continuous Component make up and functions Fuel storage and calculation Paralleling of gen-sets Generator room/area requirements UPS Systems; Required specifications for UPS systems How to read data sheets and select the correct UPS Requirements for parallel configurations and avoid pitfalls such as single point of failures How parallel installation should be done, classic mistakes made by installers and how to avoid these Harmonic Filters; Active/Passive filters and their application Battery Banks; Battery bank terminology Designing battery banks, how to calculate, and double check the battery bank to be installed Battery charging pitfalls and ensuring the right charger is being installed and used Using parallel battery banks; how to properly install them, limitations and risks when using batteries in parallel How to test batteries correctly and make decisions on cell/block or string replacement Battery casing choices; ABS, V0, V1, V2 Alternative energy storage; flywheel, re-usable cell, compressed air UPS, etc. Advanced Electro Magnetic Fields Sources of EMF Difference between single, three phase and bus-bar EMF Options available to measure EMF and how to interpret the results from single-axes and composite measurements Guidance on safe distance for equipment and humans Calculation of EMF attenuation factor for shielding material permeability and saturation factors Advanced Cooling Important definitions; dry-bulb, wet-bulb, dew-point, RH, sensible and latent heat Psychometric chart and ASHRAE recommendations Environmental class definitions and thermal specifications Temperature/humidity measurements guideline Heat dissipation methods Altitude impact on temperature intake to ICT equipment Floor plan setup for effective cooling Differences in tile surface and supporting structure and the air-flow performance impact Rack door construction and the flow performance impact Equipment Delta-T and its impact Optimising air flow Thermal units conversions Calculations for air volume displacement (CFM/CMH) Cooling capacity calculations Air-conditioning selection De- / humidifying options Air conditioning efficiency SHR impact on cost saving Efficiency indicator New cooling principle and techniques (Submerged, VSD/VRF/ECF/water- and air side economisers) Redundancy guidelines for air-conditioners avoiding classic misconceptions and mistakes for meeting ANSI/TIA-942 compliant designs Installation requirements Connections to fire panel and EPO Commissioning of air conditioners Set points and calibration CFD (Computational Fluid Dynamics) Advanced Fire Protection The fire triangle and elements to stop a fire Detection systems in detail (VESDA, VIEW, smoke sensors) Considerations for installation of sensors Proper testing of smoke sensors Water based systems i.e. deluge, wet-pipe, dry-pipe, pre-action and why most of them don't work and how to detect this Details on Inert and Halocarbon systems and how to select the correct system for your data centre How to calculate the gas content ensuring the appropriate level is installed to suppress the fire including safety considerations Other requirements for gas systems such as release times, hold times, pipe install requirements and other important factors Requirements for the fire detection panel Installation verification, methods, what to check and how New advanced fire suppression technologies Design and Install Scalable Networking Cabling System ANSI/TIA942 cabling structure topology ToR, EoR Design Intelligent patching systems Installation best practice such as routing, bending radius, separation from power, containment fill ratio, fiber link loss calculator, bonding and grounding requirement Standard for telecommunications labeling and administration Environmental Specifications and Contamination Control Acoustic noise effects, regulations, specifications and limits Data centre contaminations and classifications Measurements, standards and limits Preventive measures and avoidance Data Centre Efficiency Business drivers to go Green High-availability or Green? Green guidelines and standards How to measure it and what are acceptable numbers compared to the general industry PUE classes defined by Green Grid and issues with PUE Techniques for saving energy in all parts of the data centre i.e. application/system level, cooling, power distribution Mock ExamEXAM: Certified Data Centre Specialist

Overview From falling objects to electrical shock, there are many injuries that lurk in the construction site. In order to protect the workers from these accidents, the UK government has developed the CDM regulations. Learn about this regulation and create a safe working site with our CDM Training course.  In this course, you will get a clear understanding of the CDM regulations. The informative modules will educate you on the planning phase of the construction project. From the modules, you will learn the skills for developing and maintaining a safe construction site. The course will also help you understand the legalities and liabilities of a construction site.  This course is the perfect opportunity to enhance your knowledge of CDM and plan safe working sites. Join today Course Preview Learning Outcomes Get a deep insight into the UK CDM regulations. Learn about the planning phase of the construction project Develop the ability to create and maintain a safe construction site Explore the legalities and liabilities of a construction site Why Take This Course From John Academy? Affordable, well-structured and high-quality e-learning study materials Engaging tutorial videos, materials from the industry-leading experts Opportunity to study in a user-friendly, advanced online learning platform Efficient exam systems for the assessment and instant result Earn UK & internationally recognised accredited qualification Easily access the course content on mobile, tablet, or desktop from anywhere, anytime Excellent career advancement opportunities Get 24/7 student support via email. What Skills Will You Learn from This Course? Safety management Construction planning Maintaining legal responsibilities Who Should Take This CDM Training? Whether you're an existing practitioner or an aspiring professional, this course is an ideal opportunity. It will elevate your expertise and boost your CV with key skills and a recognised qualification attesting to your knowledge. Are There Any Entry Requirements? This CDM Training is available to all learners of all academic backgrounds. But learners should be aged 16 or over to undertake the qualification. And a good understanding of the English language, numeracy, and ICT will be helpful. Certificate of Achievement After completing this course successfully, you will be able to obtain an Accredited Certificate of Achievement. Certificates & Transcripts can be obtained either in Hardcopy at £14.99 or in PDF format at £11.99. Career Path​ This exclusive CDM Training course will equip you with effective skills and abilities and help you explore career paths such as  CDM Coordinator Construction Manager Health and Safety Manager Safety Consultant Module 01:Introducing CDM Regulations Introducing CDM Regulations 00:09:00 Module 02:An Overview Of CDM Regulations An Overview Of CDM Regulations 00:09:00 Module 03:Building and Maintaining a Safe Site Building and Maintaining a Safe Site 00:11:00 Module 04:A Continued Overview Of The CDM Regulations A Continued Overview Of The CDM Regulations 00:08:00 Module 05:Legalities and Liabilities on a Site Legalities and Liabilities on a Site 00:09:00 Module 06:Planning Phases of Construction Projects Planning Phases of Construction Projects 00:08:00 Certificate and Transcript Order Your Certificates and Transcripts 00:00:00

48-Hour Knowledge Knockdown! Prices Reduced Like Never Before! This Certificate in CDM Awareness at QLS Level 3 course is endorsed by The Quality Licence Scheme and accredited by CPDQS (with 120 CPD points) to make your skill development & career progression more accessible than ever! Are you looking to improve your current abilities or make a career move? If yes, our unique CDM Awareness at QLS Level 3 course might help you get there! It is an expertly designed course which ensures you learn everything about the topic thoroughly. Expand your expertise with high-quality training from the CDM Awareness at QLS Level 3 course. Due to CDM Awareness at QLS Level 3's massive demand in the competitive market, you can use our comprehensive course as a weapon to strengthen your knowledge and boost your career development. Learn CDM Awareness at QLS Level 3 from industry professionals and quickly equip yourself with the specific knowledge and skills you need to excel in your chosen career. The CDM Awareness at QLS Level 3 course is broken down into several in-depth modules to provide you with the most convenient and rich learning experience possible. Upon successful completion of the CDM Awareness at QLS Level 3 course, an instant e-certificate will be exhibited in your profile that you can order as proof of your skills and knowledge. Add these amazing new skills to your resume and boost your employability by simply enrolling in this CDM Awareness at QLS Level 3 course. This CDM Awareness at QLS Level 3 training can help you to accomplish your ambitions and prepare you for a meaningful career. So, join us today and gear up for excellence! Why Prefer This CDM Awareness at QLS Level 3 Course? Opportunity to earn a certificate endorsed by the Quality Licence Scheme & another accredited by CPDQS which is completely free. Get a free student ID card! (£10 postal charge will be applicable for international delivery) Innovative and engaging content. Free assessments 24/7 tutor support. Take a step toward a brighter future! *** Course Curriculum *** Here is the curriculum breakdown of the CDM Awareness at QLS Level 3 course: Module 01: Introduction to Construction, Design and Management (CDM) Regulations Module 02: Regulations and Legislation Module 03: Key Roles and Responsibilities of Duty Holders Module 04: Construction Phase Plan (CPP) Module 05: Health and Safety File, and CDM Tools Module 06: Safety Requirements and Procedures Module 07: Case Study Assessment Process You have to complete the assignment questions given at the end of the course and score a minimum of 60% to pass each exam. Our expert trainers will assess your assignment and give you feedback after you submit the assignment. You will be entitled to claim a certificate endorsed by the Quality Licence Scheme after you have completed all of the Certificate in CDM Awareness at QLS Level 3 exams. CPD 120 CPD hours / points Accredited by CPD Quality Standards Who is this course for? This CDM Awareness at QLS Level 3 course is perfect for highly motivated people who want to improve their technical skills and prepare for the career they want! Requirements CDM Awareness at QLS Level 3 No prior background or expertise is required. Career path The CDM Awareness at QLS Level 3 course will boost your CV and aims to help you get the job or even the long-awaited promotion of your dreams. Certificates Certificate in CDM Awareness at QLS Level 3 Hard copy certificate - Included After successfully completing the Certificate in CDM Awareness at QLS Level 3 , you can order an original hardcopy certificate of achievement endorsed by the Quality Licence Scheme andalso you can order CPDQSAccredited Certificate that is recognised all over the UK and also internationally. The certificates will be home-delivered, completely free of cost. CPDQS Accredited Certificate Digital certificate - Included

11 in 1 "CDM" Bundle only at £53 Boost Your Career with Apex Learning and Get Noticed By Recruiters in this Hiring Season! Get Hard Copy + PDF Certificates + Transcript + Student ID Card worth £160 as a Gift - Enrol Now Give a compliment to your career and take it to the next level. This CDM bundle will provide you with the essential knowledge to shine in your professional career. Whether you want to develop skills for your next job or elevate your skills for your next promotion, this CDM bundle will help you stay ahead of the pack. Throughout the CDM programme, it stresses how to improve your competency as a person in your chosen field while also outlining essential career insights in the relevant job sector. Along with this CDM course, you will get 10 premium courses, an originalhardcopy, 11 PDF certificates (Main Course + Additional Courses) Student ID card as gifts. This CDM Bundle Consists of the following Premium courses: Course 01: CDM Awareness Training Course Course 02: Construction Safety Course 03: Architectural Studies Course 04: Building Surveying and Construction Management Diploma Course 05: Land Surveying Course 06: Bricklaying Course 07: Construction Industry Scheme (CIS) Course 08: Material Management Course 09: LOLER Training Course 10: RIDDOR Training Course 11: Emergency First Aid and Incident Management at Work As one of the top course providers in the UK, we're committed to providing you with the best educational experience possible. Our industry experts have designed the CDM to empower you to learn all at once with accuracy. You can take the CDM course at your own pace - anytime, from anywhere. Enrol now in CDM to advance your career, and use the premium study materials from Apex Learning. How will I get my Certificate? After successfully completing the course you will be able to order your CPD Accredited Certificates (PDF + Hard Copy) as proof of your achievement. PDF Certificate: Free (Previously it was £6*11 = £66) Hard Copy Certificate: Free (For The Title Course: Previously it was £10) The bundle incorporates basic to advanced level skills to shed some light on your way and boost your career. Hence, you can strengthen your CDM expertise and essential knowledge, which will assist you in reaching your goal. Moreover, you can learn from any place in your own time without travelling for classes. Curriculum of Bundle Course 01: CDM Awareness Training Course Module 01: Introduction to Construction, Design and Management Regulations Module 02: Regulations and Legislation Module 03: Key Roles and Responsibilities of Duty Holders Module 04: Construction Phase Plan (CPP) Module 05: Health and Safety File, and CDM Tools Module 06: Safety Requirements and Procedures Module 07: Case Study Course 02: Construction Safety Module 01: Managing Health and Safety Module 02: Risk Assessment and Common Risks Module 03: Health and Safety Guidelines and Legislations Module 04: Reporting Accidents at Work Module 05: General Site Issues Module 06: Working at Height Module 07: Excavation Work and Confined spaces Module 08: Work Equipments Module 09: Manual and Mechanical Handling Module 10: Chemical and Biological Health Hazards and Control Module 11: - Electrical Hazards and Control Module 12: - Fire Hazards and Control Course 03: Architectural Studies Module 01: Introduction to Architectural Studies Module 02: Ancient Architecture Module 03: Architectural Ideas and Movements Module 04: Architectural Styles Module 05: Art Deco Architectural Style Module 06: Scandinavian Architectural Style Module 07: Victorian Architectural Style Module 08: Classical and Early Christian Architectural Style Module 09: Gothic Architectural Style Module 10: Baroque and Rococo Architectural Style Module 11: Eclecticism Architectural Style Module 12: Modern and Post-Modern Architectural Style Module 13: Interior Designing Module 14: Colour in Interior Designing Module 15: Lighting in Interior Design Part One Module 16: Lighting in Interior Design Part Two Course 04: Building Surveying and Construction Management Diploma Construction Cost Estimation Building Surveyor Training Course 05: Land Surveying Introduction to Land Surveying Land Surveying Basics Land Surveying Instrumentation Land Surveying Methods and Techniques Topographic Surveying and Mapping Boundary Surveying Surveying Health and Safety Course 06: Bricklaying Module 01: Introduction to Bricklaying Module 02: Tools of Bricklaying Module 03: Bonding of Bricklaying Module 04: Basic Techniques of Bricklaying Module 05: Constructing Walls Module 06: Basic Joint Finishes Module 07: Building Curved Arches Module 08: Building Curved Brickwork and Defects and Maintenance of Bricklaying Course 07: Construction Industry Scheme (CIS) Module 01: Construction Industry Scheme (CIS) Module 02: Coverage of the Scheme Module 03: Contractors and Registration for the Scheme Module 04: Verification Process Module 05: The CIS Returns Module 06: Record Keeping and CIS Certificates Module 07: Penalties Involved in CIS Module 08: Miscellaneous Information Course 08: Material Management Introduction to Material Management Purchasing and Supply Chain Management Inventory Management, Planning and Control Stores Management and Control Forecasting Material Requirements Planning Materials Handling Course 09: LOLER Training Module 01: Introduction to LOLER Module 02: Part 01 - Selecting Lifting Equipment and Accessories Module 03: Part 02 - Selecting Lifting Equipment and Accessories Module 04: Planning the Lifting Operation Module 05: Factors Affecting Safe Lifting Operation Module 06: Roles and Responsibilities Module 07: Risk Assessment Module 08: Examination and Inspection Module 09: Reports and Defects Course 10: RIDDOR Training Module 01: Health and Safety at Work and the Laws Module 02: Managing for Health and Safety Module 03: Risk Assessment and Common Risks Module 04: RIDDOR Course 11: Emergency First Aid and Incident Management at Work Introduction to Workplace First Aid Legal Framework for Workplace First Aid Incident Management at Work Primary Survey Secondary Survey Basic First-Aid Techniques Dealing with Minor Injuries at the Workplace Secondary Illness Loss of Responsiveness and CPR Secondary Illness Breathing Problems Secondary Illnesses and Injuries Dealing With Fractures and Dislocations Call for an Emergency CPD 110 CPD hours / points Accredited by CPD Quality Standards Who is this course for? Anyone from any background can enrol in this CDM bundle. Requirements This CDM course has been designed to be fully compatible with tablets and smartphones. Career path Having this expertise will increase the value of your CV and open you up to multiple job sectors. Certificates Certificate of completion Digital certificate - Included Certificate of completion Hard copy certificate - Included You will get the Hard Copy certificate for the title course (CDM Awareness Training Course) absolutely Free! Other Hard Copy certificates are available for £10 each. Please Note: The delivery charge inside the UK is £3.99, and the international students must pay a £9.99 shipping cost.

Overview Many life-threatening dangers can lurk in a construction site. Thus, following the regulations and designing the plan accordingly is very important. If you are new to this topic, our CDM Awareness Course can help you out. Not only the newbies but even the exciting professionals can polish their knowledge. Through this comprehensive course, you will be able to understand the basic principles of CDM. It will help you understand the key responsibilities of the duty holders. In addition, you will be able to develop the construction phase plan. The lessons will also include detailed lectures on CDM tools and safety measures. After completing the course, you will receive a certificate of achievement this certificate will increase your employability in the construction industry. Enrol now! Course Preview Learning Outcomes Familiarise yourself with the CDM regulations Understand the major role and responsibility of the duty holders Learn about the construction phase planning Know the tools used for CDM Gain in-depth knowledge of health and safety measures Why Take This Course From John Academy? Affordable, well-structured and high-quality e-learning study materials Meticulously crafted engaging and informative tutorial videos and materials Efficient exam systems for the assessment and instant result Earn UK & internationally recognised accredited qualification Easily access the course content on mobile, tablet, or desktop from anywhere, anytime Excellent career advancement opportunities Get 24/7 student support via email What Skills Will You Learn from This Course? Construction Management Building Planning Health And Safety Awareness Contractual Administration Who Should Take This CDM Awareness Course? Whether you're an existing practitioner or an aspiring professional, this course will enhance your expertise and boost your CV with key skills and a recognised qualification attesting to your knowledge. Are There Any Entry Requirements? The course is available to all learners of all academic backgrounds. But learners should be aged 16 or over to undertake the qualification. And a good understanding of the English language, numeracy, and ICT will be helpful. CDM Awareness Course Certification After completing and passing the Online Floristry Course successfully, you will be able to obtain a Recognised Certificate of Achievement. Learners can obtain the certificate in hard copy at £14.99 or PDF format at £11.99. Career Path​ This exclusive CDM Awareness Course will equip you with effective skills and abilities and help you explore career paths such as  Construction Worker Construction Manager Safety Officer Module 01: Introduction To Construction, Design And Management (CDM) Regulations Introduction to Construction, Design and Management (CDM) Regulations 00:20:00 Module 02: Regulations And Legislation Regulations and Legislation 00:33:00 Module 03: Key Roles And Responsibilities Of Duty Holders Key Roles and Responsibilities of Duty Holders 00:30:00 Module 04: Construction Phase Plan (CPP) Construction Phase Plan (CPP) 00:33:00 Module 05: Health And Safety File, And CDM Tools Health and Safety File, and CDM Tools 00:35:00 Module 06: Safety Requirements And Procedures Safety Requirements and Procedures 00:35:00 Module 07: Case Study Case Study 00:25:00 Assignment Assignment - CDM Awareness Training Course 00:00:00 Certificate and Transcript Order Your Certificates and Transcripts 00:00:00

Our Aim Is Your Satisfaction! Offer Ends Soon; Hurry Up!! Are you looking to improve your current abilities or make a career move? Our unique CDM Awareness course might help you get there! Expand your expertise with high-quality training - study the CDM Awareness course and get an expertly designed, great-value training experience. Learn from industry professionals and quickly equip yourself with the specific knowledge and skills you need to excel in your chosen career through the CDM Awareness online training course. This Certificate in CDM Awareness at QLS Level 3 course is endorsed by The Quality Licence Scheme and accredited by CPD QS (with Y CPD points) to make your skill development & career progression more accessible than ever! The CDM Awareness course is broken down into several in-depth modules to provide you with the most convenient and rich learning experience possible. Upon successful completion of the CDM Awareness course, an instant e-certificate will be exhibited in your profile that you can order as proof of your skills and knowledge. Add these amazing new skills to your resume and boost your employability by simply enrolling in this course. This CDM Awareness training can help you to accomplish your ambitions and prepare you for a meaningful career. So, join us today and gear up for excellence! Why Prefer This CDM Awareness Course? Opportunity to earn a certificate endorsed by the Quality Licence Scheme & another certificate accredited by CPD QS after completing the CDM Awareness course Get a free student ID card! (£10 postal charges will be applicable for international delivery) Innovative and engaging content. Free assessments 24/7 tutor support. Take a step toward a brighter future! *** Course Curriculum *** Here is the curriculum breakdown of CDM Awareness course: Module 01: Introduction Module 02: Regulations and Legislation Module 03: Key Roles and Responsibilities of Duty Holders Module 04: Construction Phase Plan (CPP) Module 05: Health and Safety File, and CDM Tools Module 06: Safety Requirements and Procedures Module 07: Case Study Assessment Process You have to complete the assignment questions given at the end of the course and score a minimum of 60% to pass each exam. Our expert trainers will assess your assignment and give you feedback after you submit the assignment. After passing the Certificate in CDM Awareness at QLS Level 3 course exam, you will be able to request a certificate at an additional cost that has been endorsed by the Quality Licence Scheme. CPD 120 CPD hours / points Accredited by CPD Quality Standards Who is this course for? Anyone interested in learning more about the topic is advised to take this CDM Awareness course. This course is open to everybody. Requirements You will not need any prior background or expertise to enrol in this course. Career path After completing this course, you are to start your career or begin the next phase of your career. Certificates Certificate of completion Digital certificate - £10 Certificate in CDM Awareness at QLS Level 3 Hard copy certificate - £89 After successfully completing the Certificate in CDM Awareness at QLS Level 3,you can order an original hardcopy certificate of achievement endorsed by the Quality Licence Scheme. The certificate will be home-delivered, with a pricing scheme of - 89 GBP inside the UK 99 GBP (including postal fees) for international delivery CPD Accredited Certificate 29 GBP for Printed Hardcopy Certificate inside the UK 39 GBP for Printed Hardcopy Certificate outside the UK (international delivery)

Boost Your Career By Enrolling In This CDM Awareness Bundle To Overcome Your Challenges! Recent studies have shown that the construction industry accounts for a significant proportion of work-related fatalities, with 39% of all work-related fatalities occurring in this sector. It is therefore imperative that the construction industry ensures that all employees are aware of the risks and hazards associated with their work. This is where our CDM Awareness course comes in. This comprehensive course covers all aspects of construction, from minimum requirements of building design and construction to site management safety training. It also includes modules on construction cost estimation, construction management principles and practices, and workplace health and safety. Our courses are designed to provide individuals with a broad understanding of the industry, giving them the knowledge and skills needed to work safely and efficiently. At the end of this course, individuals will have a strong understanding of the construction industry and its associated risks and hazards. They will be able to identify potential hazards, assess risks and implement control measures to mitigate these risks. By enrolling in our CDM Awareness course, individuals can be assured that they will receive the knowledge and skills needed to work safely and efficiently in the construction industry. This CDM Awareness bundle package includes 1 Premium, The Quality Licence Scheme-endorsed course, 10 additional CPDQS Accredited Certificate courses, with expert assistance, and a FREE courses assessment included. Learn a range of in-demand technical skills to help you progress in your career with 12 months of unlimited access to this bundle of courses. If you enrol in this CDM Awareness package, you will not be charged any extra fees. This CDM Awareness Bundle Package includes: Course 01: Certificate in CDM Awareness at QLS Level 3 10 Additional CPD QS Accredited Premium Courses - Course 01: Professional Interior Design & Construction Course 02: Minimum Requirements of Building Design and Construction Course 03: Construction Management Principles and Practices Course 04: Site Management Safety Training Course 05: Construction Site supervisor Course 06: Construction Cost Estimation Course 07: Construction Estimation using RSMeans Course Course 08: Introduction to Xactimate: Construction Cost Estimation Course 09: Construction Safety Course 10: Workplace Health and Safety Success becomes a lot simpler with this CDM Awareness bundle package, which allows you to monetise your skills. This CDM Awareness bundle is appropriate for both part-time and full-time students, and it can be completed at your own pace. Learning Outcome Upon completion of the course, you will be able to: Understand the principles and practices of CDM regulations and their application in the construction industry. Demonstrate knowledge of professional interior design and construction techniques. Identify and apply the minimum requirements for building design and construction. Understand the principles of construction management and their practical application in construction projects. Implement site management safety procedures and practices. Manage construction sites effectively as a supervisor. Estimate construction costs accurately using various techniques and tools. Ensure construction safety and implement health and safety practices in the workplace. The course materials for CDM Awareness are designed by experts, and you can access them. easily from any of your smartphones, laptops, PCs, tablets, etc. Master the skills. You need to arm yourself with the necessary qualities and explore your career opportunities in relevant sectors. Why Prefer This CDM Awareness Bundle? You will receive a completely free certificate from the Quality Licence Scheme. Option to receive 10 additional certificates accredited by CPD QS Get a free student ID card! (£10 postal charges will be applicable for international delivery) Engaging voiceover and visual elements for your convenience. Complete the bundle at your own pace. Free assessments and immediate results. 24/7 tutor support. This course curriculum covers a broad range of topics related to the construction industry, from CDM awareness and professional interior design to construction cost estimation and workplace health and safety. You will learn about the principles and practices of CDM regulations and their application in the construction industry. You will also gain knowledge of minimum building design and construction requirements and learn about the principles of construction management and site management safety procedures. The course will equip you with the skills needed to manage construction sites effectively, estimate construction costs accurately, and implement health and safety practices in the workplace. *** Course Curriculum: *** Module 01: Introduction to Construction, Design and Management (CDM) Regulations Module 02: Regulations and Legislation Module 03: Key Roles and Responsibilities of Duty Holders Module 04: Construction Phase Plan (CPP) Module 05: Health and Safety File, and CDM Tools Module 06: Safety Requirements and Procedures Module 07: Case Study You have to complete the assignment questions given at the end of the course and score a minimum of 60% to pass each exam. Our expert trainers will assess your assignment and give you feedback after you submit the assignment. You will be entitled to claim a certificate endorsed by the Quality Licence Scheme after you have completed all of the Certificate in CDM Awareness at QLS Level 3 exams. Show off Your New Skills with a Certificate of Completion After successfully completing the Certificate in CDM Awareness at QLS Level 3, you can order an original hardcopy certificate of achievement endorsed by the Quality Licence Scheme. The certificate will be home-delivered, completely free of charge. To Additional the Quality Licence Scheme Endorsed Certificate, you have to pay the price based on the level of these courses: Level 1 - £59 Level 2 - £79 Level 3 - £89 Level 4 - £99 Level 5 - £119 Level 6 - £129 Level 7 - £139 Certificate Accredited by CPD QS Upon finishing the bundle, you will need to order to receive a certificate accredited by CPD QS that is recognised all over the UK and also internationally. The pricing schemes are - Printed Hardcopy Certificate £29 inside the UK. £39 outside the UK (International Delivery). CPD 220 CPD hours / points Accredited by CPD Quality Standards Who is this course for? This self-paced and comprehensive yet interactive course is designed for: Individuals interested in pursuing a career in construction management, surveying, or bricklaying. Construction industry workers looking to improve their technical skills and knowledge. Business owners and managers seeking to comply with health and safety regulations and CIS scheme. Anyone interested in working in the construction industry or developing their career in this field. Individuals looking to enhance their CV or progress to higher education in construction-related fields. Requirements No prior background or expertise is required. Career path Here are some potential jobs and career paths that you can opt for in the UK: Construction Manager (£41,000) Quantity Surveyor (£38,000) Architect (£35,000) Building Surveyor (£32,000) Land Surveyor (£28,000) Note: These salary figures may vary depending on factors such as location, experience, and job role.

CDM Health and Safety Course: Learn the Fundamentals and Advance Your Career The construction industry is a vital part of the UK economy, but it is also one of the most dangerous. In fact, construction workers are more likely to be injured at work than workers in any other industry. That's why it's so important to have a strong understanding of CDM Health and Safety regulations and best practices. The CDM Health and Safety Course is designed to give you the knowledge and skills you need to help build a safer and healthier construction industry. The CDM Health and Safety course is tailored to usher you into this thriving domain, covering essential topics such as the CDM Health and Safety File and detailed CDM Health and Safety tools, as well as vital safety requirements and procedures. Elevating your professional career, this CDM Health and Safety course is a cornerstone in understanding the nuances of ensuring safety standards. Enrol in the CDM Health and Safety Course today! Why would you choose the CDM Health and Safety course: Lifetime access to CDM Health and Safety course materials Full tutor support is available from Monday to Friday with the CDM Health and Safety course Learn CDM Health and Safety skills at your own pace from the comfort of your home Gain a complete understanding of CDM Health and Safety course Accessible, informative CDM Health and Safety learning modules designed by experts Get 24/7 help or advice from our email and live chat teams with the CDM Health and Safety Study CDM Health and Safety in your own time through your computer, tablet or mobile device A 100% learning satisfaction guarantee with your CDM Health and Safety Course Course Curriculum: Module 01: Health and Safety File, and CDM Tools Module 02: Safety Requirements and Procedures CDM Health and Safety Course Learning Outcomes Understand the fundamentals of CDM Health and Safety. Grasp the application and importance of CDM Health and Safety Tools. Recognise key safety requirements in various scenarios. Comprehend essential safety procedures and their applications. Assess and interpret theoretical CDM Health and Safety principles. Identify the relevance of CDM Health and Safety in diverse contexts. Develop a robust theoretical foundation in CDM Health and Safety dynamics. CPD 10 CPD hours / points Accredited by CPD Quality Standards Who is this course for? The CDM Health and Safety course helps aspiring professionals who want to obtain the knowledge and familiarise themselves with the skillsets to pursue a career in CDM Health and Safety. Requirements To enrol in this CDM Health and Safety course, all you need is a basic understanding of the English Language and an internet connection. Career path The CDM Health and Safety course will enhance your knowledge and improve your confidence in exploring opportunities in: Health and Safety Advisor: £25,000 to £45,000 per year Health and Safety Manager: £35,000 to £60,000 per year Risk Manager: £40,000 to £70,000 per year Environmental Health Officer: £30,000 to £45,000 per year Certificates CPD Accredited PDF Certificate Digital certificate - Included CPD Accredited PDF Certificate CPD Accredited Hard Copy Certificate Hard copy certificate - £10.79 CPD Accredited Hard Copy Certificate Delivery Charge: Inside the UK: Free Outside of the UK: £9.99 each

Overview Dive deep into the intricate world of construction, design, and management with the 'CDM Awareness Complete Training'. This comprehensive course not only demystifies the CDM awareness meaning but also offers a thorough understanding of the regulations, legislation, and key roles pivotal to the industry. From delving into the nuances of the Construction Phase Plan (CPP) to mastering the essentials of health and safety, this training ensures that you're well-equipped to navigate the complexities of the CDM landscape. The curriculum is crafted, ensuring each module builds upon the last. Starting with an introduction to CDM regulations, learners will progress to understand the legislation that governs the sector. You'll also have a holistic grasp of duty-holder responsibilities, safety procedures, and the indispensable tools that make CDM successful. Whether you're a novice eager to learn or someone looking to refresh your knowledge, this course promises to be an enlightening journey. Learning Outcomes: Understand the foundational principles of Construction, Design, and Management (CDM) regulations. Gain insights into the prevailing regulations and legislation in the CDM sector. Identify and comprehend the roles and responsibilities of various duty holders. Acquire knowledge about the Construction Phase Plan (CPP) and its significance. Master the components of the Health and Safety File and the use of CDM tools. Why buy this CDM Awareness Complete Training? Unlimited access to the course for forever Digital Certificate, Transcript, student ID all included in the price Absolutely no hidden fees Directly receive CPD accredited qualifications after course completion Receive one to one assistance on every weekday from professionals Immediately receive the PDF certificate after passing Receive the original copies of your certificate and transcript on the next working day Easily learn the skills and knowledge from the comfort of your home Certification After studying the course materials of the CDM Awareness Complete Training there will be a written assignment test which you can take either during or at the end of the course. After successfully passing the test you will be able to claim the pdf certificate for £5.99. Original Hard Copy certificates need to be ordered at an additional cost of £9.60. Who is this CDM Awareness Complete Training for? Individuals keen on understanding the CDM sector and its regulations. Construction managers aiming to enhance their knowledge of safety procedures. Design professionals looking to integrate CDM regulations into their projects. Safety officers wanting to update their understanding of CDM tools and files. Students and fresh graduates aspiring for a career in construction and design management. Prerequisites This CDM Awareness Complete Training does not require you to have any prior qualifications or experience.  Career path Construction Manager: £40,000 - £60,000 per annum Design Coordinator: £35,000 - £50,000 per annum Safety Officer: £30,000 - £45,000 per annum CDM Consultant: £45,000 - £65,000 per annum Site Supervisor: £25,000 - £40,000 per annum Project Planner: £38,000 - £55,000 per annum Course Curriculum Module 01: Introduction to Construction, Design and Management (CDM) Regulations Introduction to Construction, Design and Management (CDM) Regulations 00:20:00 Module 02: Regulations and Legislation Regulations and Legislation 00:33:00 Module 03: Key Roles and Responsibilities of Duty Holders Key Roles and Responsibilities of Duty Holders 00:30:00 Module 04: Construction Phase Plan (CPP) Construction Phase Plan (CPP) 00:33:00 Module 05: Health and Safety File, and CDM Tools Health and Safety File, and CDM Tools 00:34:00 Module 06: Safety Requirements and Procedures Safety Requirements and Procedures 00:35:00 Module 07: Case Study Case Study 00:25:00 Assignment Assignment - CDM Awareness Training Course 00:00:00