919 Courses delivered Online

Duration 3 Days 18 CPD hours This course is intended for This course is designed for Service Provider networking professionals in job roles such as: Network administrators Network architects Network designers Network engineers Network managers Network Operations Center (NOC) personnel Network supervisors Overview After taking this course, you should be able to: Use NETCONF and RESTCONF programmability protocols on Cisco devices Describe and use tools to validate YANG data models on Cisco devices Describe and configure model-driven telemetry on Cisco devices Describe and configure network traffic automation with Cisco XTC Describe and use network automation tools that utilize SSH Automate service provider network configuration with Cisco NSO Describe how to automate virtualized resources with Cisco ESC Describe how to automate service provider WAN with Cisco WAE This course prepares you to implement and support automation solutions in a Service Provider network infrastructure, using network programmability principles, protocols, tools, and mechanisms. Through a combination of lessons and hands-on labs, you will learn to deploy, configure, monitor, and operate Service Provider network environments using modern data models. These models allow you to represent operational data and new network management protocols in order to administer hundreds or thousands of devices in a single operation, replacing traditional, time-consuming, error prone, device-by-device Command Line Interface (CLI) management. The course also introduces powerful automation solutions that can streamline network operations. This course also prepares you for the CCNP-Service Provider concentration exam 300-535. Implementing Network Device Programmability Interfaces with NETCONF and RESTCONF Implement NETCONF Protocol Implement RESTCONF Protocol Implementing Model-Driven Programmability with YANG YANG Data Models YANG Tools YANG Development Kit Implementing Model-Driven Telemetry Implementing Model-Driven Telemetry with gRPC Implementing Model-Driven Telemetry with gNMI Automating Service Provider Network Traffic with Cisco XTC Cisco XTC Fundamentals Configure Cisco XTC Automating Networks with Tools That Utilize SSH Implement Device Configurations with Python Netmiko Library Implement Device Configurations with Ansible Playbooks Orchestrating Network Services with Cisco NSO Cisco NSO Fundamentals Cisco NSO Device Manager Cisco NSO Services Implement Device Configurations with Python Automating Virtualized Resources with Cisco Elastic Services Controller Cisco ESC Architecture Cisco ESC Resource Management Automating the WAN with Cisco WAE Describe the Cisco WAE Components Additional course details: Nexus Humans Cisco Implementing Automation for Cisco Service Provider Solutions v1.0 (SPAUI) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Cisco Implementing Automation for Cisco Service Provider Solutions v1.0 (SPAUI) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.

Duration 2 Days 12 CPD hours This course is intended for IT professionals interested in understanding the capabilities of the MDS 9000 Series using Cisco DCNM. IT professionals seeking a deeper knowledge of SAN operations using both CLI and DCNM may take the alternative 4-day course, Configuring Cisco MDS 9000 Series Switches (DCMDS). Much of the hands-on work in DCNMS is also covered in DCMDS. This course is also designed for professionals in the following roles including: Consulting systems engineer Data center engineers Data center operators Data center network management engineers Storage network administrator Network administrator Network engineer Sales engineer Technical solutions architect Overview After taking this course, you should be able to: Describe Cisco DCNM SAN components, licensing, high availability, and security features Describe Cisco DCNM SAN reports, alerts, event forwarding, and troubleshooting tools, including Cisco DCNM SAN Insights and SAN Analytics features The Managing SAN Infrastructure with Cisco© Data Center Network Manager (DCNMS) v1.0 course provides product training that that teaches you to deploy, operate, and maintain the Cisco Data Center Network Manager (DCNM) SAN solutions. You will learn to configure, monitor, and troubleshoot Cisco storage networking infrastructure using Cisco DCNM. Cisco DCNM provides management, automation, visualization, and troubleshooting across Cisco Nexus© and Cisco Multilayer Distributed Switching (MDS) solutions.You will learn how the DCNM serves as a Storage Area Network (SAN) solution for managing and troubleshooting Cisco storage architecture. Implementing Cisco DCNM SAN Cisco DCNM Solution Overview Implement Cisco DCNM SAN Integrate Cisco DCNM SAN with VMware vCenter Cisco DCNM SAN Licensing Monitoring and Troubleshooting SAN Infrastructure Using Cisco DCNM SAN Cisco DCNM SAN Alerts and Reports Dashboards in Cisco DCNM SAN SAN Troubleshooting with the Cisco DCNM SAN Analytics and Telemetry Streaming Additional course details: Nexus Humans Cisco Managing SAN Infrastructure with Cisco Data Center Network Manager v1.0 (DCNMS) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Cisco Managing SAN Infrastructure with Cisco Data Center Network Manager v1.0 (DCNMS) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.

Duration 5 Days 30 CPD hours This course is intended for Deployment engineer Network engineer Sales engineer Overview After taking this course, you should be able to: Describe the Cisco conferencing architecture including cloud, hybrid, and on-premises conferencing Describe the physical deployment options and deployment models for Cisco Meeting Server, including Cisco Meeting Server 1000, 2000, and virtual machine Configure a Cisco Meeting Server single combined deployment for Web-Real Time Communications (WebRTC) endpoints within the enterprise Use APIs and the Cisco Meeting Server API Guide to configure profiles using Postman and the Webadmin API tool Configure a scalable and resilient deployment of Cisco Meeting Server with three servers for WebRTC endpoints within the enterprise Configure a scalable and resilient deployment of Cisco Meeting Server to support standard Session Initiation Protocol (SIP) and WebRTC connectivity outside the enterprise Configure a scalable and resilient deployment of Cisco Meeting Server to support recording and streaming of conferences Configure Cisco Unified Communications Manager and Cisco Meeting Server to support Rendezvous, Scheduled, and Ad-hoc conferencing for Cisco Unified CM registered endpoints Configure Cisco Meeting Server to integrate with a preconfigured on-premise Microsoft Skype for Business installation Install Cisco TelePresence Management Suite (Cisco TMS) and Cisco TelePresence Management Suite for Microsoft Exchange (Cisco TMSXE) on a single Microsoft Windows 2012 server and connect to an existing SQL environment Install and integrate Cisco Meeting Management with Cisco TMS and Cisco Meeting Server Set up and manage a scheduled conference with Cisco TMS and Cisco Meeting Management Capture and analyze logs from Cisco Meeting Server and Cisco Meeting Manager to diagnose faults, including a SIP connection error The Implementing Cisco Collaboration Conferencing (CLCNF) v1.0 course focuses on Cisco© on-premises conferencing architecture and solutions. You will gain knowledge and skills to design and implement common conferencing deployment scenarios of Cisco Meeting Server, its integration with call control features such as Cisco Unified Communications Manager and Cisco Expressway, and other Cisco collaboration conferencing devices.This course offers lessons and hands-on labs to prepare you for the 300-825 Implementing Cisco Collaboration Conferencing (CLCNF) exam. Course outline Describing Cisco Conferencing Architecture Configuring a Single Combined Deployment Installing Cisco Meeting Server Using APIs with Cisco Meeting Server Configuring a Cisco Meeting Server Scalable and Resilient Deployment Configuring Business to Business (B2B) and WebRTC Firewall Traversal Connectivity for Cisco Meeting Server Configuring Recording and Streaming with Cisco Meeting Server Troubleshooting Cisco Meeting Server Integrating Cisco Meeting Server with Cisco Unified CM Integrating Cisco Meeting Server with Microsoft Skype for Business Installing and Operating Cisco TMS and Cisco TMSXE Installing and Integrating Cisco Meeting Management Additional course details: Nexus Humans Cisco Implementing Cisco Collaboration Conferencing v2.0 (CLCNF) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Cisco Implementing Cisco Collaboration Conferencing v2.0 (CLCNF) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.

Duration 5 Days 30 CPD hours This course is intended for The primary audience for this course is as follows: Network Engineers Technicians Overview Upon completing this course, the learner should be able to meet these overall objectives: Fundamental network management concepts and introduce the features of Cisco Prime Infrastructure Manage the inventory with Cisco Prime Infrastructure Map the network using the tools in Cisco Prime Infrastructure Manage user access to tasks, functions, and devices in Cisco Prime Infrastructure Manage the devices and configuration archive in Cisco Prime Infrastructure Work with Cisco AVC, QoS, and Cisco IWAN services using Cisco Prime Infrastructure tools and deploy Cisco TrustSec identity services using Cisco Prime Infrastructure Monitor and troubleshoot your network with Cisco Prime Infrastructure Perform system administration tasks in Cisco Prime Infrastructure In this Cisco Prime Infrastructure training course, you will learn how to design, deploy, operate, and optimize enterprise networks with the Cisco Prime Infrastructure solution (PI). Cisco Prime Infrastructure is part of a Unified Access solution that converges traditional wired and wireless networks into a single network management tool. The Managing Enterprise Networks labs put you in a realistic customer scenario and let you practice what you learned using Cisco Prime Infrastructure 3.7. This MENPI training course?s network management perspective has a heavier lean to the wired side of the network management. We suggest students have a working understanding of networks and networking terminology with regards to CCNA Routing and Switching. Course Outline Module 1: Cisco Prime Infrastructure Overview Module 2: Inventory Management Module 3: Map the Network Module 4: Role-Based Access Control Module 5: Configuration Management Module 6: Compliance Management Module 7: Services Management Module 8: Monitor and Troubleshoot Module 9: System Administration

Duration 5 Days 30 CPD hours This course is intended for This course is designed for Collaboration engineers and administration professionals in job roles such as: Network administrator Network architect Network designer Network engineer Network manager Overview After taking this course, you should be able to: Analyze and troubleshoot SIP, H.323, and media protocols Implement time-of-day routing, call park, call pickup, and meet-me conferences in Cisco Unified Communications Manager Implement call coverage in Cisco Unified Communications Manager Configure and troubleshoot Cisco Unified Communications Manager Device Mobility Configure and troubleshoot Cisco Unified Communications Manager Extension Mobility Configure and troubleshoot Cisco Unified Communications Manager Unified Mobility Implement Cisco Unified Communications Manager Express for SIP phones Implement globalized call routing within and between Cisco Unified Communications Manager clusters Implement Media Gateway Control Protocol (MGCP) fallback and Survivable Remote Site Telephony (SRST) in Cisco Unified Communications Manager and in Cisco IOS XE gateways Implement Call Admission Control and Automated Alternate Routing (AAR) in Cisco Unified Communications Manager Implement URI calling in Cisco Unified Communications Manager for calls within a cluster and between clusters Troubleshoot multisite Cisco Unified Communications Manager deployments Implement Intercluster Lookup Service (ILS) between Cisco Unified Communications Manager clusters and enable General Data Protection Regulation (GDPR) Configure and troubleshoot Cisco Unified Border Element In this course, you will learn how to use Cisco© Unified Communications Manager features to consolidate your communications infrastructure into a scalable, portable, and secure collaboration solution. This course prepares you for the 300-815 Implementing Cisco Advanced Call Control and Mobility Services (CLACCM) concentration exam and CCNP-Collaboration certification. Course Outline Analyzing and Troubleshooting Signaling and Media Protocols Implementing Cisco Unified Communications Manager Supplemental Services Implementing Call Coverage in Cisco Unified Communications Manager Configuring and Troubleshooting Cisco Unified Communications Manager Device Mobility Configuring and Troubleshooting Cisco Unified Communications Manager Extension Mobility Configuring and Troubleshooting Cisco Unified CM Unified Mobility Implementing Cisco Unified Communications Manager Express Implementing Globalized Call Routing Implementing Remote Site Survivability Implementing Call Admission Control in Cisco Unified Communications Manager Implementing URI Calling in Cisco Unified Communications Manager Troubleshooting Multisite Cisco Unified Communications Manager Deployments Examining Global Dial Plan Replication Configuring and Troubleshooting Cisco Unified Border Element Lab outline Analyze SIP, H.323, and Media Protocols Troubleshoot SIP and Media Protocols Implement Cisco Unified Communications Manager Supplemental Services Implement Call Hunting and Call Queueing in Cisco Unified Communications Manager Configure Device Mobility Troubleshoot Cisco Unified Communications Manager Device Mobility Configure Cisco Unified Communications Manager Extension Mobility Troubleshoot Cisco Unified Communications Manager Extension Mobility Configure Cisco Unified Mobility Troubleshoot Cisco Unified Mobility Implement Endpoints in Cisco Unified Communications Manager Express Implement Endpoint Addressing and Call Routing in Cisco Unified Communications Manager Express Implement Calling Privileges in Cisco Unified Communications Manager Express Implement Hunt Groups, Call Park, and Paging in Cisco United Communications Manager Express Implement Globalized Call Routing Implement TEHO, PSTN Backup, and CoS in a Globalized Call-Routing Deployment Implement MGCP Fallback and Survivable Remote Site Telephony Implement Call Admission Control Implement a URI-Based Dial Plan for Multisite Deployments Troubleshoot Globalized Call Routing Troubleshoot Call Admission Control Implement Global Dial Plan Replication Implement Cisco Unified Border Element Troubleshoot Cisco Unified Border Element

Duration 3 Days 18 CPD hours This course is intended for Server administrators Network engineers Systems engineers Consulting systems engineers Technical solutions architects Network administrators Storage administrators Network managers Cisco integrators and partners Overview After taking this course, you should be able to: Describe and implement Fibre Channel, zoning, and N-Port Virtualization (NPV) features on Cisco UCS Describe and implement Fibre Channel over Ethernet (FCoE) on Cisco UCS Describe Cisco UCS policies for service profiles Describe Cisco Adapter Fabric Extender (FEX) and Single Root I/O Virtualization Describe and implement Role-Based Access Control (RBAC) on Cisco UCS Describe and implement external authentication providers on Cisco UCS Manager Describe and implement key management on Cisco UCS Manager Describe Cisco UCS Director Describe and implement Cisco Intersight Describe the scripting options for Cisco UCS Manager Describe and implement monitoring on Cisco UCS Manager The Configuring Cisco Unified Computing System (DCCUCS) v1.0 shows you how to deploy, secure, operate, and maintain Cisco Unified Computing System? (Cisco UCS©) B-series blade servers, Cisco UCS C-Series, and S-Series rack servers for use in data centers. You will learn how to implement management and orchestration software for Cisco UCS. You will gain hands-on practice: configuring key features of Cisco UCS, Cisco UCS Director, and Cisco UCS Manager; implementing UCS management software including Cisco UCS Manager and Cisco Intersight?; and more. Implementing Cisco UCS Storage Area Network (SAN) SAN Introduction Cisco UCS Fabric Interconnect Fibre Channels modes Named VSANs Cisco UCS Fibre Channel and FCoE Storage Connectivity Describing Cisco UCS Policies for Service Profiles Storage Policies and Profiles Basic Input Output System (BIOS) Policies Boot Policy Intelligent Platform Management Interface (IPMI) Policies Scrub Policies Maintenance Policies Describing Cisco Adapter FEX and Single Root I/O Virtualization Cisco FEX Overview Cisco Adapter FEX Single Root I/O Virtualization Implementing RBAC on Cisco UCS RBAC in Cisco UCS Users, Roles, and Privileges Functions of Organizations and Locales Effective Rights of a User Implementing External Authentication Providers Options for External Authentication Providers Implementing Key Management on Cisco UCS Manager Public Key Infrastructure Implementing Cisco UCS Director Cisco UCS Director Overview Policies, Virtual Data Centers, and Catalogs Cisco UCS Director Virtualization Support Managing Compute with Cisco UCS Director Cisco UCS Manager Orchestration Self-Service Portal Reporting and Monitoring in Cisco UCS Director Implementing Cisco Intersight Cisco UCS Director Overview Important Features of Cisco Intersight Describing the Scripting Options for Cisco UCS Manager Cisco UCS Manager XML API Cisco UCS Management Information Tree Managed Object Browser Cisco UCS PowerTool Cisco UCS Python Software Development Kit (SDK) Implementing Key Management on Cisco UCS Manager Public Key Infrastructure Implementing Cisco Intersight Cisco Intersight Overview Important Features of Cisco Intersight Describing the Scripting Options for Cisco UCS Manager Cisco UCS Manager XML API Cisco UCS Management Information Tree Managed Object Browser Cisco UCS Manager PowerTool Cisco UCS Python SDK Implementing Monitoring on Cisco UCS Manager Logging Sources in Cisco UCS Manager Port Monitoring Capabilities of Cisco UCS Manager Simple Network Management Protocol (SNMP) Security Ramifications Cisco UCS Manager Call Home Feature Lab outline Configure Pod-Specific Device Aliases Configure Zoning Configure VSANs in Cisco UCS Manager Configure Unified Ports on Cisco UCS Fabric Interconnects Install and Boot VMware Elastic Sky X Integrated (ESXi) on Cisco UCS from the FCoE Logical Unit Number (LUN) via FCoE Configure RBAC Configure Cisco UCS Manager to Authenticate Users via Open Lightweight Directory Access Protocol (OpenLDAP) Configure a Trusted Point and Key Ring in Cisco UCS Manager Configure Cisco UCS with Cisco Intersight Configure Cisco UCS Manager Using Scripting Implement Syslog and Call Home Additional course details: Nexus Humans Cisco Configuring Cisco Unified Computing System v1.0 (DCCUCS) training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Cisco Configuring Cisco Unified Computing System v1.0 (DCCUCS) course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.

Duration 5 Days 30 CPD hours This course is intended for The primary audience for this course is as follows: Cisco Unified Communications system channel partners and resellers System engineers Customers deploying and maintaining Cisco Unified Contact Center Express products. Overview Upon completing this course, the learner will be able to meet these overall objectives: Provide a comprehensive overview of the Cisco Unified Contact Center Express product suite. This overview will cover descriptions of the product, compatibility, and hardware and software options, architecture, and sizing and ordering tools. Provide a complete description of the Cisco Unified CCX installation process, the configuration required with an overview of most common configuration web pages, and describe the call flow processes needed to establish a call on Cisco Unified CCX. Describe the Cisco Unified CCX script editor, how it is installed and how to implement common IVR scripting techniques. Provide a comprehensive view of Cisco Unified CCX ACD operations to include basic contact center build-up, scripting, agent and supervisor desktop configurations, advanced scripting topics, and reporting. Describe how to install, configure and use features found in Cisco Unified CCX Premium such as, Remote Monitoring, Outbound Dialer, Agent Email, Agent Web Chat, and Automatic Speech Recognition (ASR) and Text-to-Speech (TTS). Understand how to maintain and monitor a Cisco Unified CCX system This course, Deploying Cisco© Unified Contact Center Express (UCCXD) v6.0, provides the student with hands-on experience and knowledge of tasks typically performed during contact center deployment. Cisco Unified CCX Product Overview Cisco Unified CCX Product Packages Cisco Unified CCX Architecture Designing Cisco Unified CCX Cisco Unified CCX Installation and Configuration Installing Cisco Unified CCX Managing Cisco Unified CCX Configuring Basic Properties of Cisco Unified CCX Cisco Unified CCX Scripting Understanding Script Editor Basics Creating a Basic IVR Script Prompting and Collecting Information Accessing an External Database Making Decisions Confirming Caller Input Cisco Unified CCX ACD Operations Implementing Cisco Unified CCX

Duration 5 Days 30 CPD hours This course is intended for Channel Partner/Reseller Customer Employee Overview Course Objectives Identify the basic components and operations of the Unified CCE solution. Configure and script a basic UCCE CVP deployment. Perform the ICM configuration tasks required to support basic agent functionality. Build and test a basic ICM script utilizing microapps. Configure and script UCCE to support reporting requirements, precision queuing and RONA. Identify how to successfully deploy the CVP VXML component in a Unified CCE solution. Generate basic reports using Cisco Unified IC. The Administering Cisco Unified Contact Center Enterprise Part 1 (AUCCE1) v2.0 is a 5 day instructor-led course presented by training partners to system engineers and customers who will be involved with Day 2 support of a UCCE solution deployed in a CVP comprehensive environment. This course describes the requirements, resources and tools needed to perform routine adds, moves and changes in the inbound/outbound UCCE environment. This course is intended for those administering the solution, or who may be responsible for Level 1-2 support of the solution. Course Outline Module 1: Cisco Unified Contact Center Enterprise v10 Foundations Module 2: UCCE Configuration and Scripting Module 3: Unified CCE Inbound Agent Considerations Module 4: Unified CCE IVR/VRU Functionality Module 5: Additional UCCE Considerations Module 6: VXML Implementation Module 7: Cisco Unified Intelligence Center Reporting

Duration 5 Days 30 CPD hours This course is intended for Network professionals, including systems engineers Channel Partners Customers Overview After taking this course, you should be able to: Describe IP multicast services Identify IP multicast issues on a data link layer Explain why Protocol Independent Multicast Sparse Mode (PIM-SM) is the most current scalable IP multicast routing protocol Describe Rendezvous Point (RP) distribution solutions Recognize the drawbacks of the PIM-SM and describe two extensions to provide possible solutions Explain basic concepts of Multiprotocol BGP (MP-BGP) and its use in the IP multicast environment Configure and deploy Multicast Source Discovery Protocol (MSDP) in the interdomain environment Describe solutions to mitigate security issues in the IP multicast network Describe the process of monitoring and maintaining multicast high-availability operations Design multicast-related application and network solutions in customer and service provider networks The Implementing Cisco Multicast (MCAST) v2.0 course teaches you the fundamentals of IP multicasting, including multicast applications, sources, receivers, group management, and IP multicast routing protocols such as Protocol Independent Multicast (PIM) used within a single administrative domain. You will learn about issues in switched LAN environments and reliable IP multicasting, and technical solutions for simple deployments of IP multicast within a provider or customer network. The course reviews the configuration and troubleshooting guidelines for implementation of IP multicast on Cisco© routers. Labs offer hands-on experience to help you prepare to deploy IP multicast successfully. Course Outline Module 1: IP Multicast Concepts and Technologies Module 2: Multicast on the LAN Module 3: PIM Sparse Mode Module 4: Rendezvous Point Engineering Module 5: PIM Sparse Mode Protocol Extensions Module 6: Multiprotocol Extensions for BGP Module 7: Interdomain IP Multicast Module 8: IP Multicast Security Module 9: Multicast Optimization and High-Availability Features Module 10: Applications of Multicast