• Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

6306 Educators providing Courses delivered Online

International Federation Of Surgical Colleges

international federation of surgical colleges

London

The International Federation of Surgical Colleges (IFSC) was founded in 1958 in Stockholm, Sweden, with the objective of speaking with a single voice for world surgery on problems of common interest. Founding members consisted of traditional colleges of surgery and surgical societies from the European continent. Official relations with the WHO started in 1960 and since then the IFSC has been a recognised non-state actor (NSA) in formal relations with the WHO. It is also in consultative status with the UN Economic and Social Council (ECOSOC) where it is in a position to advise the UN on surgical matters. The IFSC remains the only organisation representing surgeons that is in special relations with both the UN and the WHO. Over the years the IFSC regularly changed its goals and operational methods as surgical care delivery, education and training changed in world surgery. In 1992 the constitution was changed to focus primarily in supporting surgical expertise in low income countries and in 2003 the constitution was again revised to state the federation’s goal as “the advancement of surgery in developing [sic] countries, especially Africa, promoting education and training, and help with examinations”. In 2007 a Memorandum of Agreement was signed with the College of Surgeons of East, Central and Southern Africa (COSECSA) to support specific educational projects. Similar support has been extended in different formats to the West Africa College of Surgeons (WACS), basic surgical training in Sri Lanka and the Egyptian Surgical Society. About what we Did From 2010 to 2015, under the leadership of Mr Bob Lane, the IFSC has supported the design, ratification and delivery of courses in basic surgical skills, anastomosis workshops, management of surgical emergencies, surgical critical care and in research methodology to a few hundred surgical trainees, other junior doctors, nurses who work in surgery and associate clinicians, predominantly in sub-Saharan Africa, but also in Sri Lanka. Such courses were always developed and delivered on request from affiliated regional or local surgical organisations, and in consultation with ministries of health about local need. In order to easier manage the business of course delivery the IFSC was registered as a charity in England and Wales in 2011. Included in all training courses was Training of Trainers which was essential in order to create sustainability in surgical learning. Large numbers of senior surgeons joined in the teaching of trainees on our courses and were able to continue running courses independently thereafter, which is still happening in certain centres to this day. To support this process teaching material was handed over to local centres or made available electronically. In 2019 and 2021 online courses in research methodology were developed for surgical and anaesthesia trainees in COSECSA and the College of Anaesthetists of East, Central and Southern Africa (CANECSA) respectively, with guidance and support from the Royal College of Surgeons of Ireland (RCSI), a founding member of IFSC. About us, the WHO and Surgical Learning Over the years IFSC worked hard with likeminded groups to support WHO projects in emergency and essential surgery, such as contributing to the book Surgical Care at the District Hospital, the Alliance on Patient Safety, the Global Initiative for Emergency and Essential Surgical Care (GIEESC) and resolution 68.15 at WHA68 in 2015 on “Strengthening Emergency and Essential Surgical Care and Anaesthesia as a Component of Universal Health Coverage”. In 2020-2021 the IFSC contributed to the development of the Learning Strategy of the new WHO Academy with specific focus on improved global preparedness for health emergencies. Members of the IFSC’s executive board continue to play important roles in the Technical Experts Working Group for advising SADC countries on the implementation of National Surgery, Obstetrics and Anaesthesia Plans as part of Universal Health Coverage. In this process the IFSC actively contributes to implementing the WHO’s “3 Billion” Pillars of work for universal health coverage, better protection from health emergencies and people enjoying better health and wellbeing. The IFSC’s focus in delivering these goals remain in advocacy for global surgery, in supporting education and training in especially essential surgery in first level hospitals and in supporting research skills acquisition by all surgeons in especially low and middle income countries (LMICs). In this way IFSC is trying to contribute to the decolonisation of surgical education and research, and to stop the unethical flow of research data from the Global South to rich countries in the North. It has also become clear that the time for designing surgical training courses in rich Western countries (or any HICs) for delivery in LMICs has come to an end. There remains a vast learning need in surgery in the Global South but such learning is directed from surgical educational institutions and experts in LMICs. The IFSC’s role in supporting such learning needs is increasingly to provide and support individual experts from its member organisations who can help deliver or advise on such learning projects. The SARS-CoV 2 pandemic has made it possible to deliver much of such support virtually, saving the expenses and climate impact of frequent air travel. About our Vision As incoming president of IFSC I have therefore stated three goals: To make IFSC more open and democratic, and more representative of surgeons in LMICs. It means reviewing the constitution, re-introducing a president’s council, changing membership criteria, and nomination and voting processes. To give this momentum, at the AGM a new Secretary-General and a new Chair of the Education and Research Committee were elected from Southern Africa institutions. The majority of surgeons in the world are not trained through traditional surgical colleges and IFSC membership should reflect this. Proposals for changes to IFSC structure and processes will be discussed by the Executive Board (EB) in 2022 and presented at the 2022 AGM for a vote. To play our role in decolonising surgical education, training, research and care. It means discouraging the flow of teaching and training material developed in HICs to be taught in LMICs, and stopping the flow of research data and intellectual property from the Global South to rich institutions in the Global North. IFSC will, however, strongly support surgical learning programmes developed in LMICs, as requested, and continue to support our research methodology courses for trainees in COSECSA, CANECSA and elsewhere to help young surgeons and anaesthetists in LMICs have control of their own research data. To support planetary health. Human, animal, plant and climate health are all interlinked. As IFSC helps with training, ongoing learning and support for essential surgery, it is important that such progress does not come at an unnecessary cost to planetary health. This also means being aware of and speaking out about unnecessary planetary health costs of luxury surgical care in high income environments. For this goal IFSC depends on advice from experts outside our organisation. All the above mean that IFSC needs to work differently to support the role of surgeons and surgery in the world, and encourage members not to think in surgical silos, but consider how we can work with other organisations in global surgery and related groups in e.g. anaesthesia, gynaecology and with other expertise, in order to advance surgical care for patients who are most in need. Although membership of IFSC is through surgical colleges and societies, we hope that those colleagues who read this piece will be encouraged to support the work of IFSC through their respective surgical organisations.

Farmer Gow's Education

farmer gow's education

London

Farmer Gow's is registered with the Oxfordshire Work Experience Scheme. The farm offers various work experience opportunities, depending on the age of the student. The details below are not exhaustive – and with up to 20 changes to the farm routine each and every day, throughout the year - students first and foremost need to understand and appreciate the very unique work experience opportunities which we provide. Students are interviewed prior to placements being offered. What's involved? Work Experience is expensive to provide - we therefore expect a huge commitment from students to achieve as near as possible balance between the learning opportunities provided and the work a student performs. If you want to work with animals, the very first thing you need to understand and accept is that they need 24 hour/365 day a year care – so you need to be committed. We don’t keep students who can’t make a regular commitment. Farmer Gow's is a private company providing public access to farming and the countryside. Our doors are open to the public for 358 days of the year - we therefore need to ensure that you work carefully and safely - with both our animals and our visitors. We will teach you to ~ listen carefully to instructions follow those instructions and provide feedback to senior staff on all elements of the task in hand We will encourage you to ask questions – but also to make notes so that your questions come after a period of training, rather than constantly interrupting the training. We will supervise you thoroughly until we are sure you can follow instructions correctly and accurately. As your confidence grows and your ability to correctly perform tasks improves we will start to 'step back' and allow you to grow in the level of responsibility we give you. We will challenge you - and if you work hard and listen carefully - you will have a fantastic time. You will learn loads and loads and loads. You will meet many new people and learn to talk to them, work with them, and ask them for help. And that's just in your first few weeks... Age 14-16 years ~ Key Stage 4 We offer a 2-week work experience for students in years 10 and 11. Students should apply by email, with brief details of their interests. Every applicant is invited to spend a 1/2 day on the farm, to assess their suitability for a placement. A placement is confirmed after the introduction day, by email. Age 16-19 years ~ Key Stage 5 Students may apply for a work experience placement from age 15 years and thereby start at 16 years of age. The farm provides ~ 'hands on' practical and technical training to students interested in veterinary and animal careers contacts for further work experience opportunities with local farmers, businesses and government departments involved in the agricultural industry opportunities for paid work once a basic level of competence is achieved opportunities for paid work during school/college/university holidays Depending on the background of the student we would normally expect ~ From age 15 years ~ Year 1 at Farmer Gow's January-March application to join the work experience programme. Student invited to spend a ½ day on the farm, working alongside an existing student, followed by a short interview with a senior member of staff. September ~ following a successful visit and interview, student begins a one-day per week work experience. Introduction to the farm's routines, learning about everyday feeding, watering, hygiene procedures, routine tasks, preparation of feeds for hand reared lambs and kids. You will assist with twice daily 'Meet the Animals' sessions. Mandatory – February ½ term holiday - a week’s work experience, either Sunday-Thursday or Tuesday-Saturday. Mandatory – Easter holidays - one week work experience during the school holiday - either Sunday-Thursday or Tuesday-Saturday. This is our busiest time of year so you will be working under pressure. Holidays ~ please note ~ We expect students to take no more than 2-weeks off during the May-June exam period. This is hay making time - and understanding grass growing and harvesting is an incredibly important learning experience. In line with statutory holidays students may take up to six weeks (i.e. 6 days) holiday per year – one of which days will be during the Christmas stand-down period. Year 2 One day a week continues through the autumn and winter months. Most students arrange off-farm work experiences during the October school holidays. Early spring - students work with newborn/hand reared lambs and kids, refreshing/strengthening/practising Year 1 skills Students are set weekly subjects on a whole variety of agricultural subjects for presentation to staff the following weekend. This rapidly expands learning and awareness. Mandatory - February ½ term holiday, Sun-Thu or Tue-Sat – lambing will really begin to make sense – it’s a fantastic time of year. This year you may be able to assist with a lambing, you will certainly be iodine-ing newborn lambs and giving ewes and lambs heptivac injections. Injections, castration, foot trimming, ringing, record keeping, ordering feeds ... there is much to practice and new jobs to learn. Mandatory – Easter holidays - one week work experience during the school holiday - either Sunday-Thursday or Tuesday-Saturday. This is our busiest time of year so you will be working under pressure. You will be leading chick handling, egg collecting and egg boxing sessions. Customer service - you should be ready to start serving in the farm shop, welcoming visitors to the farm, helping them with chick handling - and serving them on the till. When you can do this, you will become a paid member of staff - if we have a vacancy. Working in the farm shop can only be undertaken when a student has sufficient knowledge from working on the farmyard. Visitors/customers have every imaginable questions and you need to be able to answer them with confidence and knowledge. You will be working with very young piglets, calves, lambs, kids, chicks, ducklings, turkey poults - and their adults. You will be ear tagging, worming, foot trimming, handling, feeding, moving – there’s never a dull moment at Farmer Gow’s. You will work with younger work experience students and with children on farm workshops – this will practice team leading skills Summer holidays - one week work experience (if required) on farm - or a week at another local farm/business. We will provide you with telephone numbers and a contact name. You will have a wealth of farm knowledge and handling experience on all the farm species - cattle, pigs, sheep, goats, chickens, geese, ducks and turkeys. You will be able to lead small groups of visitors through Meet the Animals. You will be able to answer their questions confidently and accurately. These skills are particularly valuable for interviews with prospective employers/university You will understand the 20+ animal medicines we use each year to safeguard our animals; you will understand routine/seasonal tasks. You will be able to medicate - orally and by injection - our farm animals. You will be able to arrange other work experiences very easily - because you have reached a level of competence which will be useful to other farms and businesses. When you have passed your driving test - you will be able to join a high end dairy farm and enjoy learning about milking and the dairy industry - unless of course you have a parent willing and able to drive you to 4am milking. Post School and on to University or other employment We will be very proud of you and want to know how you are getting on We will welcome you back for summer/Christmas/Easter work We will continue to support you - with references and contacts for further work experiences Summary The above is a basic description of the work experience opportunity available at Farmer Gow’s. We expect a lot – but offer a lot in return. If the relationship doesn’t develop well – it is normally due to a lack of commitment from the student. We will tell you and we will end the placement. Finally (as if we haven't already said an awful lot) we ask you to sign up to the above - and if you are under 18 years of age we ask a parent/guardian to co-sign - so that we all know what has been agreed and what is expected. We look forward to working with you. Applications By email to Sarah or Clara on ~ enquiries@farmergows.co.uk Please attach a current CV and make sure you also include contact telephone number.

Pwadetraining

pwadetraining

Cambridge

दिनांक 27.08.2022 को अपराह्न 3:00 बजे विभागाध्यक्ष कार्यालय के सभागार "Hindustan Colas Pvt. Ltd." द्वारा "New Technologies of Road Construction" विषयक प्रस्तुतीकरण हेतु एतदद्वारा नामित किया जाता है (1.2 Mb) दिनांक 23.07.2022 को अपराह्न 3:00 बजे विभागाध्यक्ष कार्यालय के सभागार "Luminary Projects Pvt. Ltd." द्वारा "Pressure Injection Spray Technology for Pothole Repairs" विषयक प्रस्तुतीकरण हेतु एतदद्वारा नामित किया जाता है (1.2 Mb) Uttarakhand Renewable Energy Development Agency (UREDA) द्वारा 21st से 22nd जुलाई 2022 को Pacific Hotel Dehradun में आयोजित "To develop multisectoral state energy action plan (EAP) and decision support tool for the state of Uttarakhand" से सम्बंधित Two Days Visioning Workshope में प्रतिभाग करने हेतु एतदद्वारा नामित किया जाता है (1.7 Mb) भारतीय राजमार्ग अभियंता अकादमी , नोएडा का पात्र संख्या IAHE /Training/01/Training Calender/2022-23 दि०- 18 मई 2022 द्वारा जारी ट्रेनिंग कैलेंडर वर्ष 2022-23 के अनुसार माह जुलाई से सितम्बर 2022 के मध्य आयोजित विभिन्न विषयों पर आधारित ऑनलाइन प्रशिक्षण कार्यक्रम में प्रतिभाग करने हेतु उत्तराखंड लोक निर्माण विभाग के निम्न अधिकारियो को उनके सममुख अंकित तिथियों / स्थानो के अनुसार एतदद्वारा नामित किया जाता है (1.2 Mb) दिनांक 06-07-2022 से 07-07-2022 को आयोजित Energy Simulation से सम्बंधित 02 दिवसीय प्रशिक्षण (1.2 Mb) लोक निर्माण विभाग उत्तराखंड के कनिष्ठ अभियंताओ को प्रदान किये गये 138वे प्रशिक्षण कार्यक्रम के अंतर्गत आवश्यक परीक्षाओ के सम्बन्ध में (480.0 Mb) भारतीय प्रतिस्पर्धा आयोग के प्रविधानान्तार्गत माह अप्रैल 2022 का द्वितीय Adcocacy Event का आयोजन दिनांक 21-04-2022 को अपराह्न 12:00 से 15:00 बजे तक विभागाध्यक्ष कार्यालय के सभागार में आयोजित की गयी है | (3.7 Mb) Regarding Online MIS Training On Dated 12-04-2022 (1.2 Mb) भारतीय राजमार्ग अभियंता अकादमी , नोएडा का पात्र संख्या IAHE /Training/01/Training Calender/2022-23 दि०- 22 जनवरी 2022 द्वारा जारी ट्रेनिंग कैलेंडर वर्ष 2022-23 के अनुसार माह अप्रैल से जून 2022 के मध्य आयोजित विभिन्न विषयों पर आधारित ऑनलाइन प्रशिक्षण कार्यक्रम में प्रतिभाग करने हेतु उत्तराखंड लोक निर्माण विभाग के निम्न अधिकारियो को नामित किया गया था जिसके अंतर्गत दिनांक 18-04-2022 से 29-04-2022 के मध्य Road safety Engineering and Auditing के प्रशिक्षण हेतु नामित अभियंताओ की सूची में आंशिक संशोधन किया जाता है (2.9 Mb) लोक निर्माण विभाग में कार्यरत कार्मिकों को अमीन का प्रशिक्षण दिलाये जाने के सम्बन्ध में (1.2 Mb) लोक निर्माण विभाग, उत्तराखंड में कार्यरत मिनिस्ट्रीयल संवर्ग के 624 कार्मिकों को दक्ष एवं कुशल बनाये जाने हेतु वित्तीय नियमो की जानकारी, कार्यालय प्रबंधन एवं ऑफिसर सिस्टम एवं प्रक्रियाए सम्बन्धी प्रशिक्षण प्रदान करने विषयक (1.2 Mb) भारतीय राजमार्ग अभियंता अकादमी , नोएडा का पात्र संख्या IAHE /Training/01/Training Calender/2022-23 दि०- 22 जनवरी 2022 द्वारा जारी ट्रेनिंग कैलेंडर वर्ष 2022-23 के अनुसार माह अप्रैल से जून 2022 के मध्य आयोजित विभिन्न विषयों पर आधारित ऑनलाइन प्रशिक्षण कार्यक्रम में प्रतिभाग करने हेतु उत्तराखंड लोक निर्माण विभाग के निम्न अधिकारियो को उनके सममुख अंकित तिथियों / स्थानो के अनुसार एतदद्वारा नामित किया जाता है (8.० Mb) कनिष्ठ अभियन्ता (सि०/प्रा०/वि०/याँ०) के आधारभूत प्रशिक्षण के सम्बन्ध में (1.6 Mb) कनिष्ठ अभियन्ता (सि०/प्रा०) के आधारभूत प्रशिक्षण के सम्बन्ध में (1.2 Mb) Institute of Road Traffic Education (IRTE) फरीदाबाद द्वारा Capacity Building of PWD Engineers and Police In Road Safety Management in Uttarakhand National Highway NH7 from Rishikesh to Badrinath से सम्बंधित प्रशिक्षण के सम्बन्ध में (1.5 Mb) Indian Roads Congress द्वारा दिनांक 08-09-2021 द्वारा 24-25 सितम्बर 2021 तक "Sustainable Development of Green Highways in India" विषयक दो दिवसीय Webinar हेतु नामित किया जाता है (1.2 Mb) Bitchem Asphalt Technology Limited द्वारा मार्ग निर्माण में Use of Pollution-Free CRRRI-Bitchem Cold Mix Technology के संबध में Zoom App के माध्यम से टेक्निकल Presentation दिनांक 04 सितम्बर 2021 को अपराहन 3:00 बजे से (लगभग 1 घंटे हेतु) आयोजित किया जाता है (1.2 Mb) भारतीय राजमार्ग अभियंता अकादमी , नोएडा का पात्र संख्या IAHE /Trg/01/Training Calender/2021-22 दि०- 25 मई 2021 द्वारा जारी ट्रेनिंग कैलेंडर वर्ष 2021-22 के अनुसार माह जुलाई से सितम्बर 2021 के मध्य आयोजित विभिन्न विषयों पर आधारित ऑनलाइन प्रशिक्षण कार्यक्रम में प्रतिभाग करने हेतु उत्तराखंड लोक निर्माण विभाग के निम्न अधिकारियो को उनके सममुख अंकित तिथियों / स्थानो के अनुसार एतदद्वारा नामित किया जाता है (1.2 Mb) Presentation by Techno RTM india Regarding" Evotherm Warm Mix Asphalt on Dated 20-02-2021 at 11:00 AM at E-in-C office Conference Hall (1.2 Mb) कनिष्ठ / अपर सहायक अभियन्ताओ के एक माह के अनिवार्य सेवा प्रवेश प्रशिक्षण के सम्बन्ध में (1.2 Mb) श्री सुरेन्द्र कुमार, कनिष्ठ अभियन्ता (प्रा०) को दिनांक 18-01-2021 से 16-02-2021 की एक माह के अनिवार्य प्रशिक्षण में प्रतिभाग किये जाने से अवमुक्त किया जाता है (1.2 Mb) Revised Online Training On "Will & Skill Creation Private Limited, Dehradun "on Dated 08-02-2021 to 27-02-2021 (1.2 Mb) Online Training On "Will & Skill Creation Private Limited, Dehradun "on Dated 08-02-2021 to 27-02-2021 (8.1 Mb) कनिष्ठ / अपर सहायक अभियन्ताओ के एक माह के अनिवार्य सेवा प्रवेश प्रशिक्षण के सम्बन्ध में (6.5 Mb) Presentation by Tinna Rubber and Infrastructure Limited " Tinna Green Pave Emulsion and Modified Bitumen for Construction and Recycling of Pavements using Hot Mix Cold Mix Technology on Dated 06-02-2021 at 11:00 PM at E-in-C office Conference Hall (2.2 Mb) 15 दिवसीय प्रशिक्षण कार्यक्रम "Certificate Training Course for Safety Engineers and Auditors" दिनांक 01-15 फ़रवरी 2021 के सम्बन्ध में (1.2 Mb) कनिष्ठ अभियन्ता (सि०/प्रा०) के आधारभूत प्रशिक्षण के सम्बन्ध में (2.6 Mb) Presentation by Verma Industries New Delhi Regarding " REJUPAVE-Rejuvenator for Hot-in Plant and Hot-in Situ Recycling of Bituminous Pavement. on Dated 28-01-2021 at 12:00 PM at E-in-C office Conference Hall (1.2 Mb) कनिष्ठ अभियन्ता (सि०/प्रा०) के आधारभूत प्रशिक्षण के सम्बन्ध में (1.2 Mb) कनिष्ठ / अपर सहायक अभियन्ताओ के एक माह के अनिवार्य सेवा प्रवेश प्रशिक्षण के सम्बन्ध में (1.2 Mb) लोक निर्माण विभाग उत्तराखंड के अभियन्ताओ को रोड सेफ्टी एवं रोड सेफ्टी ऑडिट से सम्बंधित ऑनलाइन प्रशिक्षण कार्यक्रम प्रदान किये जाने के सम्बन्ध में (8.2 Mb) CSIR द्वारा विभिन्न विषयक Online Training हेतु अभियन्ताओ की सूची (9.1 Mb) IAHE Noida , U.P द्वारा विभिन्न विषयक Online Training हेतु लोक निर्माण विभाग उत्तराखंड द्वारा नामित अभियन्ताओ की सूची (2.1 Mb) कनिष्ठ अभियन्ताओ के एक माह के अनिवार्य सेवा प्रवेश प्रशिक्षण के सम्बन्ध में (1.2 Mb) Online Training On "Construction, Quality Control and Maintenace of Structures"on Dated 28-09-2020 to 10-10-2020 (1.2 Mb) "Urban Mobility Planning and Management in Hill Areas" विषय दिनांक 28-09-2020 से 30-09-2020 के मध्य अकादमी में आयोजित प्रशिक्षण कार्यक्रम के सम्बन्ध में (1.2 Mb) THREE ARMEE Reinforced Earth India Pvt. Ltd. New Delhi के प्रस्ताव पर "Landslide Protection" विषय पर दिनांक - 19-09-2020 को आयोजित On-Line वेबिनार हेतु लोक निर्माण विभाग उत्तराखंड के निम्न अधिकारियों को नामित किया जाता है (2.7 Mb) कोविड - 19 द्वारा उत्पन्न परिस्थितियों के कारण प्रशिक्षण कार्यक्रम ऑनलाइन संचालित किये जाने के सम्बन्ध में (8.3 Mb) Online Training Programme on "Construction, Quality Control and Maintenance of Structures" Organized by Indian Acadmey of Highways Engineers (IAHE) during 28th September - 10th October 2020- Request for Nominations-reg" (5.4 Mb) "Geometrics Design of Highways using CAD Tools" विषय पर ऑनलाइन प्रशिक्षण कार्यक्रम दिनांक 21-09-2020 से 01-10-2020 तक आयोजित किया जाना है अधिकारियों / कर्मचारियो का नामांकन (5.1 Mb) Online Training On "Design Construction and Maintenance of flexible Pavement"on Dated 31-08-2020 to 11-09-2020 (1.0 Mb) Online Training On "Design Construction, Maintenance and Operation of Expressways" on Dated 10-08-2020 to 21-08-2020 हेतु अधिकारी नामित किये जाने के सम्बन्ध में (1.1 Mb) Online Training On "Transport Systems Modelling" on Dated 10-08-2020, 12-08-2020 to 14-08-2020 हेतु अधिकारी नामित किये जाने के सम्बन्ध में (1.2 Mb) Online Training On "Control of National Highways (Land & Traffic)" on Dated 10-08-2020 to 13-08-2020 हेतु अधिकारी नामित किये जाने के सम्बन्ध में (1.2 Mb) Online Training On "Design and Construction of High Embankment with Free Slope / RE Wall/Retaining Wall, Ground Treatment of Soft Soil" on Dated 17-08-2020 to 28-08-2020 (6.5 Mb) राष्ट्रीय आपदा प्रबंधन प्राधिकरण , भारत सरकार के सहयोग से "Landslide Mitigation and Detailed Project Reports (DPR) Prepration" विषयक 05 अर्द्धदिवसीय ऑनलाइन प्रशिक्षण कार्यक्रम हेतु अधिकारी नामित किये जाने के सम्बन्ध में (1.6 Mb) Online training programme on " Public Private Partnership (PPP) Contracts for Highway Projects" from 27th july - 07th August, 2020 - प्रशिक्षण कार्यक्रम हेतु लोक निर्माण विभाग उत्तराखंड के निम्न अधिकारियो को नामित किया जाता है (888.0 Kb) Online training programme on " Operation Maintenance and Tolling of Highway" from 27th july - 01st August, 2020 - प्रशिक्षण कार्यक्रम हेतु लोक निर्माण विभाग उत्तराखंड के निम्न अधिकारियो को नामित किया जाता है (463.0 Mb) Online training programme on " Public Private Partnership (PPP) Contracts for Highway Projects" from 27th july - 07th August, 2020 - प्रशिक्षण कार्यक्रम हेतु लोक निर्माण विभाग उत्तराखंड के निम्न अधिकारियो को नामित किया जाता है (894.2 Kb) Request for nomination Online training programme on " Public Private Partnership (PPP) Contrats for Highway Projects" from 27th July 2020 - 07th August, 2020 on Cisco WebEx (5.0 Mb) Online training programme on " Asset Management for Highways" from 13th - 24th July, 2020 - प्रशिक्षण कार्यक्रम हेतु लोक निर्माण विभाग उत्तराखंड के निम्न अधिकारियों को नामित किया जाता है (1.9 Mb) लोक निर्माण विभाग के अंतर्गत मुख्य अभियन्ता / वृत्तीय/खण्डीय संवर्ग के कनिष्ठ सहायकों को विभागीय प्रशिक्षण दिए जाने हेतु कार्मिकों का विवरण उपलब्ध कराये जाने के सम्बन्ध में (1.04 Mb) भारतीय राजमार्ग अभियंता अकादमी (आईएएचई) दिनांक 13-07-2020 से 24-07-2020 "हाईवे एसेट मैनेजमेंट" पर ऑनलाइन ट्रेनिंग प्रशिक्षण कार्यक्रम का आयोजन के सम्बन्ध में (4.3 Mb) Online Training Programme on "Operation Maintenance and Tolling of Highways" from 27th July to 01st August 2020 - Request for nominations Regd. (3.9 Mb) Online Training Programme on Planning, Design, Construction and Maintenance of Hill Roads from 20th to 31st july, 2020 on cisco WebEx Meeting - Request for nominations Regd. (8.5 Mb) प्रोजेक्ट मैनेजमेंट विषय पर ऑनलाइन प्रशिक्षण कार्यक्रम जो की दिनांक 13-07-2020 से 22-07-2020 तक निर्धारित हैं में अधिकारियों के नामांकन के सन्दर्भ में (3.64 Kb) Online training programme on " Slop Management in Hill Roads & Landslide Mitigation" from 01st - 08th July, 2020 - प्रशिक्षण कार्यक्रम हेतु श्री वी०एन० तिवारी, मुख्य अभियन्ता अल्मोड़ा , लोक निर्माण विभाग उत्तराखंड को नामित किया जाता है (80.6 Kb) Online training programme on " Slop Management in Hill Roads & Landslide Mitigation" from 01st - 08th July, 2020 - प्रशिक्षण कार्यक्रम हेतु लोक निर्माण विभाग उत्तराखंड के निम्न अधिकारियों को नामित किया जाता है (93.3 Kb) Online Training Programme Design Construction and maintenance of Flexible Pavement for Highway Projects from 22th june to 30th june 2020 - Request for Nominations Reg. (68.5 Kb) Online training programme on " Slop Management in Hill Roads & Landslide Mitigation" from 01st - 08th July, 2020 - request for nominations regd. (490.0 Kb) Indian Academy of Highway Engineers (IAHE) Noida (UP) में "Use of Waste Material in Highway Construction" विषयक दिनांक 01 जून से 06 जून 2020 तक आयोजित online प्रशिक्षण कार्यक्रम हेतु लोक निर्माण विभाग उत्तराखंड के निम्न अधिकारियों को नामित किया जाता है (102.0 Kb) Governing council of IBC for 2020-21 हेतु उत्तराखंड से श्री एम०पी०एस० वर्मा मुख्य अभियंता क्वालिटी कंट्रोल लोक निर्माण विभाग देहरादून को नामित किये जाने के सम्बन्ध में (76.3 Kb) Indian Acadmey of Highway Engineering (IAHE), Noida UP, Online Training Dated 26-05-2020 to 02-06-2020 (196.8 Kb) IAHE Training Calander FY 2020-21 (364.0 Kb) Indian Acadmey of Highway Engineering (IAHE), Noida UP, Online Training (152.0 Kb) Presentation On "Bitumen Emulsion, PMD, CRMB and other Tech" by "Juno Bitumix Pvt. Ltd." on Dated 22-02-2020 at 03:00 PM At E-in-C office Conference Hall (565.0 Kb) दिनांक 20 फरवरी से 22 फरवरी 2020 की अवधि में "Road safety : A Futuristic Approach" विषयक 03 दिवसीय प्रशिक्षण कार्यशाला के सम्बन्ध में (242.6 Kb) "Training Programme on "Disign and Construction High Embankments Ground improvment techniques for Soft Soil and Geo-synthetics Soil Structures. " के सम्बन्ध में (143.0 Kb) "Planning Disign Construction and opration of expressways including ITS/ETS" प्रशिक्षण के सम्बन्ध में (96.1 Kb) संशोधित "Application of Unnamed Aerial Veicle (UAV/Drone) in Disaster Risk" on Dated 10th Feb 2020 to 14th Feb 2020 तक भारतीय सुदूर संवेदन संस्थान, कालीदास रोड, देहरादून हेतु निम्न अधिकारियों को नामित किया जाता है (87.3 Kb) "Application of Unnamed Aerial Veicle (UAV/Drone) in Disaster Risk" on Dated 10th Feb 2020 to 14th Feb 2020 तक भारतीय सुदूर संवेदन संस्थान, कालीदास रोड, देहरादून हेतु निम्न अधिकारियों को नामित किया जाता है (493.2 Kb) प्रदेश में संचालित / किर्यान्वित की जा रही योजनाओं की वित्तीय एवं भौतिक प्रगति का Online Portal "ई-आंकलन"" पर डाटा फीड किये जाने हेतु निम्न अधिकारियों को नामित किया जाता है (565.7 Kb) Indian Academy of Highway Engineers, (IAHE) Noida. में रोड सेफ्टी ऑडिट प्रशिक्षण के सम्बन्ध में (513.9 Kb) Two Days Training Program Regarding "Uttarakhand Procurement Rules 2017 & Government e-marketplace (GeM) by "Will & Skill Creation Private Limited Dehradun at Training & Research Institute (TRI), Dehradun on Dated 06-02-2020 to 07-02-2020 at 9:45 AM (112.0 Kb) Presentation On "Products and Services for Road Sector" by "Amit Ltd " on Dated 04-02-2020 at 11:00 AM At E-in-C office Conference Hall (603.0 Kb) Presentation by "JK White cement Works New Delhi " on Dated 15-02-2020 at 12:00 PM At E-in-C office Conference Hall (588.0 Kb) Presentation On "New Technologies of road construction and Bitumen Emulsions" by "Hindustan Colas Private Limited New Delhi" on Dated 04-02-2020 at 03:00 PM At E-in-C office Conference Hall (555.5 Kb) कनिष्ठ अभियन्ता (सि0/प्रा0) के आधारभूत प्रशिक्षण के सम्बन्ध में (1.9 Mb) Nomination for 05 days Training Programme On Dated 10-02-2020 to 14-02-2020 in Indian Academy of Highway Engineers (IAHE) Noida, UP India. (906.2 Kb) Nomination for Training "Pavement & Bridge inspection, maintenance,repair, rehabilitation and management system" On Dated 20th to 25th January 2020 At Indian Academy of Highway Engineers, Noida" (293.8 Kb) "भूकम्प सुरक्षा में भवन निर्माण उपविधियों (Building Bye-Laws)" विषय पर केन्द्रीय भवन संस्थान रूडकी में दिनांक 20-24 जनवरी 2020 तक 05 दिवसीय प्रशिक्षण कार्यक्रम के सम्बन्ध में (365.5 Kb) Workshop Regarding "Application of Geographic Information System in DRm" On Dated 27th to 31th January 2020 (609.0 Kb) Presentation On "Request for Presentation & Products approval & application for your upcoming Projects" by "JALNIDHI BITUMEN SPECIALITIES PVT. LTD" on Dated 30-12-2019 at 11:00 AM (578.0 Kb) Nomination for Training"8th Task Force Meeting" "Construction Industry Devlopment Council New Delhi" On Dated 18-12-2019 in Civil Services Officer's Institute, Vinay Marg, Chanakyapuri, New Delhi 110021 (187.0 Kb) "भूकम्प सुरक्षा में भवन निर्माण उपविधियों (Building Bye-Laws)" विषय पर केन्द्रीय भवन संस्थान रूडकी में दिनांक 16-20 दिसम्बर 2019 तक 05 दिवसीय प्रशिक्षण कार्यक्रम के सम्बन्ध में (280.2 Kb) Nomination of Delegates for 80th Annual Session of Indian Roads Congress to be Held at Samrat Ashok Convention Centre, North of Gandhi maidan, Patna Bihar From 19th to 22nd December 2019 (371.0 Kb) Indian Acadmey of Highway Engineering की तीन दिवसीय कार्यशाला में प्रतिभाग किये जाने के सम्बन्ध में (612.8 Kb) "भूकंप सुरक्षा में भवन निर्माण उप-विधियों (Building Bye-Laws)" 05 Days Training Program (309.8 Kb) भारतीय मानक ब्यरो National Building Code 2016 से सम्बंधित दो दिवसीय कार्यशाला विषयक (240.2 Kb) दिनांक 16 नवम्बर 2019 को अपराहन 3:०० बजे विभागाध्यक्ष कार्यालय के conference हॉल में अधिशासी निदेशक उत्तराखण्ड आपदा न्यूवीकरण एवं प्रबंधन सचिवालय परिसर देहरादून के द्वारा चयनित रा0इ0 कॉलेज में किये गये रेट्रोफिटिंग कार्यो की विडियो फिल्म विषयक प्रस्तुतीकरण का आयोजन किया जा रहा है (517.6 Kb) Presentation by "MIDAS." Technical Workshop at PWD Uttarakhand on Midas Bridge Desig Software" on Dated 08-11-2019 to 09-11-2019 at 11:00 AM At E-in-C office Conference Hall (610.2 Kb) Presentation by "JALNIDHI BITUMEN SPECIALITIES PVT. LTD." Request for Presentation & Products approval & Application for Your Upcoming Projects" on Dated 11-11-2019 at 11:00 AM At E-in-C office Conference Hall (602.0 Kb) Presentation by "Zydex" Regarding Sustainable lonf life Asphalt Roads using nanotechnology" on Dated 13-11-2019 at 3:00 PM At E-in-C office Conference Hall (600.0 Kb) Presentation by "Verma Industries" Regarding "Supply & use of Rejuvenator for Asphalt pavement, Emulsion for Microsurfacing & Other bituminous Work" on Dated 16-11-2019 at 3:00 PM At E-in-C office Conference Hall (600.2 Kb) Presentation byAR Thermosets Regarding "New Green Technology for road construction" on Dated 05-11-2019 at 3:00 PM At E-in-C office Conference Hall (612.2 Kb) नवनियुक्त सहायक अभियंताओ को भारतीय रोड कांग्रेस (IRC) की मेम्बरशिप लेने के सम्बन्ध में (794.1 Kb) Nomination for Training Programme Indian Acadmey of Highway Engineers (Ministry of Transport & Highway) A-5 Sector 62, NH-24 Bypass Noida – 201301 U.P. (291.9 Kb) Presentation by Vedang Consultancy Service Private Limited Regarding "Implementation of Construcion Management & E-measurement System" on Dated 28-09-2019 at 3:00 PM At E-in-C office Conference Hall (310.0 Kb) Presentation by Amil Limited Regarding "Range Products and Servies for Road Sector" on Dated 24-09-2019 at 3:00 PM At E-in-C office Conference Hall (1.4 Mb) Nomination for Training Program Indian Regarding "Academy of Highway Engineers (Ministry of Road Transport & Highway) A-5 , Sector 62, NH-24 Bypass Noida - 201301 U.P." (313.0 Kb) Regarding Prakash Chandra Pant AAE, PD Almora, Training At "Engineering Staff College of India" Subject of Regulatory Practice in National Building Code 2016" Dated 11-09-2019 to 13-09-2019 (227.0 Kb) Training Program Regarding "Road Safety and road Safety audit (Level-2), On Dated 09-09-2019 to 13-09-2019 At AITD New Delhi (RSA) (270.0 Kb) Presentation by Zydex Industries Pvt. Ltd. By "Vision of pothole free, water & snow resistant rural Roads/Highways in Uttarakhand" on Dated 31-08-2019 3:00 PM At E-in-C office Conference Hall (456.5 Kb) "भूकंप सुरक्षा में भवन निर्माण उप-विधियों (Building Bye-Laws)" 05 Days Training Program (267.0 Kb) 3 Days Training Workshop 26 to 28 August 2019 Regarding "Housing Model Technology : A Futuristic Approach" (645.5 Kb) "भूकंप सुरक्षा में भवन निर्माण उप-विधियों (Building Bye-Laws)" 05 Days Training Program (309.5 Kb) 95th Meeting of Governing Council of IBC & Technical Seminar (527.2 Kb) "भूकंप सुरक्षा में भवन निर्माण उप-विधियों (Building Bye-Laws)" 05 Days Training Program (328.0 Kb) Technical Presentation on "India Road Safety Products" at 02-08-2019 at E-in-C office Conference Hall (612. Kb) Indian Academy of Highway Engineers (IAHE) Noida, UP India के ट्रेनिंग कैलेंडर वर्ष 2019-20 के अनुसार विभिन्न विषयों पर आधारित प्रशिक्षण कार्यक्रम हेतु उत्तराखण्ड लो०नि०वि० के निम्न अधिकारियो को नामित किया जाता है (1.8 Mb) Training Program on "20th Edition of Geosmart India" by Survey of India at HICC Hyderabad on Dated 03-12-2019 to 05-12-2019 (216.0 Kb) Training Program Regarding "Auality Assurance, Health Assessment and Rehabilitation of Bridges" at CSIR- CRRI New Delhi on Dated 29-07-2019 to 02-08-2019 (612.0 Kb) Presentation by Asaian contec Ltd. Regarding "NDT&QC Product Solutions" on Dated 29-06-2019 2:30 to 4:00 (500.00 Kb) Technical Presentation by "SWAREFLEX INDIA" on "India Road Safety Products" On Dated 26-06-2019 Conference Hall at 3:00 PM to 5:00 PM भूकंप सुरक्षा मैं भवन निर्माण उप- विधियों ("Building By Laws") विषय पर केंद्रीय भवन अनुसन्धान संसथान रुड़की मैं दि०- 20-24 may, 2019 के मध्य आयोजित 05 दिवसीय प्रशिक्षण कार्यक्रम मैं प्रतिभाग करने हेतु लोक निर्माण विभाग से निम्न अधिकारीयों को नामित किया जाता है (294.2 Kb) सहायक अभियन्ताओ के आधारभूत प्रशिक्षण के सम्बन्ध में (687.8 Kb) भूकंप सुरक्षा मैं भवन निर्माण उप- विधियों ("Building By Laws") विषय पर केंद्रीय भवन अनुसन्धान संसथान रुड़की मैं दि०- 20-24 may, 2019 के मध्य आयोजित 05 दिवसीय प्रशिक्षण कार्यक्रम मैं प्रतिभाग करने हेतु लोक निर्माण विभाग से निम्न अधिकारीयों को नामित किया जाता है (312.1 Kb) Nomination for One Day Workshop on "Safety for Vulnerable Road Users" on Dated 31st May 2019 At Hotel Sheraton Grand, Pune (235.4 Kb) Nomination for One Day Workshop on "Safety for Vulnerable Road Users" on Dated 31st May 2019 At Hotel Sheraton Grand, Pune (1.4 Mb) Educational Session on "Road Safety Manuals (IRC 67, MORTH Sec 800), Road Signages & Road Furniture" By 3M India Limited, Hariyana On Dated 17-06-2019 3:00 PM At E-in-C office Conference Hal (591.9 Kb) Software Applications for the Purpose of Skill Up-gradation Presentation by Mitulaksh Mukerjee, Centre Head, CADD Centre भूकंप सुरक्षा मैं भवन निर्माण उप- विधियों ("Building By Laws") विषय पर केंद्रीय भवन अनुसन्धान संसथान रुड़की मैं दि०- 20-24 may, 2019 के मध्य आयोजित 05 दिवसीय प्रशिक्षण कार्यक्रम मैं प्रतिभाग करने हेतु लोक निर्माण विभाग से निम्न अधिकारीयों को नामित किया जाता है (664 kb) आपदा न्यूनीकरण एवं प्रबंधन केंद्र सचिवालय परिसर देहरादून में अर्धदिवसीय कार्यशाला में प्रतिभाग करने हेतु नामित अधिकारी (203.5 Kb) Nomination for "Indian Academy of Highway Engineers (Ministry of Road Transport & highway) (436.6 Kb) Nomination for 02 Days Training Program on "Landslide Mitigation and Detailed Project Report (DPR) Preparation" (205.0 Kb) कार्मिकों की Capacity Building हेतु Executive MBA Course के सम्बन्ध में One Day Workshop "National Seminar on best practices under RIDF" (204.3 Kb) 5 days Training Program on "Road Safety (Level 1)" at Red Fox Hotel, 4, 973, 113, Rajpur Road Dehradun (808.2 Kb) 23rd Annual Convention & Seminar Regarding "Executive Training Program for Building Professionals on External Cladding Systems" On Dated 26-02-2019 to 27-02-2019 At IBC HQ, Sector VI, R.K. Puram, New Delhi (857.2 Kb) Seminar Regarding "Rejuvenator for Asphalt pavement, Micro Surfacing seal , surface dressing emulsion, cold Mix,, pot hole repair compound, Emulsion and Half warm mix for roads" On Dated 27-02-2019 At 12:00 to 2:30 HOD office Conference Hall Seminar Regarding "Renwable Energy and Efficiency Measures in Built Habitat" On Dated 8-03-2019 At Vigyan Bhawan New Delhi. (1.1 Mb) उत्तराखंड सेवा का अधिकार आयोग द्वारा दिनांक 02 मार्च 2019 को रघुनंदन सिंह टोलिया उत्तराखंड प्रशासनिक अकादमी नैनीताल में "सुशासन नागरिक अधिकार पत्र एवं सेवा का अधिकार अधिनियम " विषयक राज्य स्तरीय कार्यशाला का आयोजन हेतु लोक निर्माण विभाग उत्तराखंड से नामित अधिकारी (246.0 Kb) Nominations request for training programmes on Road Safety and Road Safety Audit. (675.9 Kb) "भूकम्प सुरक्षा में भवन निर्माण उप-विधियों (Building Bye- Laws)" विषयक केन्द्रीय भवन अनुसंधान संस्थान, रूडकी में दिनांक 25-29 मार्च 2019 तक 05 दिवसीय प्रशिक्षण कार्यक्रम हेतु लोक निर्माण विभाग के निम्न अधिकारियों को नामित करने हेतु (349.5 Kb) Presentation Regarding "Manufacturing of CFRP & GFRP composites for different verticals of Civil Rehabilitation and Structure Redesigning" on Dated 20-02-2019 At 11:30 to 12:30 HOD office Conference Hall (734.3 Kb) सहायक अभियन्ताओ के आधारभूत प्रशिक्षण के सम्बन्ध में Level-2 Road Safety प्रशिक्षण के लिये आवेदन के सम्बन्ध में कनिष्ठ अभियन्ताओ को प्रशिक्षण दिलाये जाने के सम्बन्ध में (1.1 Mb) 131 वा आधारभूत प्रशिक्षण पाठ्यक्रम लोक निर्माण विभाग एवं सिंचाई विभाग (यांत्रिकी) में प्रशिक्षण के उपरान्त परीक्षा में प्रथम 5 सहायक अभियंताओ का कार्य उत्साहवर्धक एवं प्रशंसनीय रहा (375.0 Kb) Presentation Regarding "PVC door window panelling etc." by Kumar Arch Tech Private Limited" on Dated 11-02-2019 At 11:30 to 12:30 HOD office Conference Hall (716.0 Kb) CSIR-CRRI Training Programmes 2019-20 (1.02 Mb) लोक निर्माण विभाग, उत्तराखण्ड के नवनियुक्त सहायक अभियंताओ हेतु आधारभूत प्रशिक्षण कार्यक्रम का आयोजन किये जाने के सम्बन्धी (628.4 Kb) e-Governance विषयक प्रशिक्षण कार्यक्रम में नामांकन के सम्बन्ध में (246.5 Kb) Perfab Concept के सम्बन्ध में Presentation and Solution हेतु कार्यक्रम के सम्बन्ध में (766.1 Kb) 5 days Training Program on "Road Safety (Level 1)" (1.1 Mb) "Advancing Transportation Infrastructure : Road and Highways" (219.5 Kb) Training of Master Trainers on Climate Change and Disaster Risk Reduction and Climate Finance. (280.4 Kb) "Road Safety Audit and other Road Safety related aspects" विषय पर दिनांक 10-24 दिसम्बर 2018 तक CRRI, New Delhi में 15 दिवसीय Certificate Course में प्रतिभाग करने के सम्बन्ध में (2.8 Mb) Indian Buildings Congress द्वारा दिनांक 28-30 दिसम्बर 2018 तक पटना में "Rapid Building Construction- Emerging Technologies" विषय पर 23rd Annual Convention & Seminar (295.2 Kb) Presentation On "Minimum Metal & Plywood Pvt. Limited. Dated 03-12-2018 (752.6 Kb) इंस्टिट्यूट ऑफ इंजिनियरस (इंडिया) स्टेट सेंटर में आयोजित तीन दिवसीय एम०एस०एक्सेल -2016 विषय पर प्रशिक्षण के सम्बन्ध में (340.2 Kb) कनिष्ठ अभियन्ताओ के एक माह के प्रशिक्षण के सम्बन्ध में (1.8 Mb) Excel 2016 Four Days Training Programme at IEI UKSC Dehradun from 22-23 October , 25-26 October 2018 (559.8 Kb) One Day Seminar on "Landslide Analysis and Mitigation : LAM - 2018" (278.3 Kb) दिनांक 29-09-2018 से ? NewsStop Button 21-11-2020 शासनादेश संख्या 383/111(1)/19-190(PWD)/01 टी०सी०-11 दिनांक 05/02/2020 में प्राविधानित प्रयोगशालाओ का रिसर्च सेल , लोक निर्माण विभाग देहरादून में कार्यरत सहायक अभियन्ताओ के मध्य कार्यभार वितरण 18-11-2020 Application Form for Approval of Bituminous Products Suppliers Employee Corner Training Calendar Seniority List Salary Details Opens in a new window Employee Locator Opens in a new window Accountant General Uttarakhand Opens in a new window Disclosure of Property Transfers & Promotions Photo Gallery Gallery view photo gallery »

Simply Wholistic

simply wholistic

Remember, beauty is never skin deep. Nothing only exists because of the shell it belongs to or has been given. Bearing this in mind, whenever we want to change anything, whether it be physical, mental or emotional, (our appearance, feelings and thoughts) the change only occurs from changing your thoughts, thinking patterns, and your feelings about how you see yourself. For example, we change our looks easily and have any amount of cosmetic surgery we could afford, but unless we feel beautiful inside, we will never feel beautiful outside. We must first love ourselves in order that we can love others. If we don't know how to even treat ourselves with love and compassion, how could we ever treat anyone else with the same? No one is saying it is easy to change the way you think, I certainly know its not. But how much money would it be worth to you to be happy in your life, with all aspects of your life? Could any amount of money ever make up for you being miserable and unhappy in your life? If you truly believe you are happy in life and you think it's all genuine, then all I ask you to do is take all the material things away out of your life and imagine that all you have left is your family, friends, pets, the roof over your head with no objects in there and last of all yourself, your body, including your feelings, thoughts, thinking patterns and physical looks and your good health. Would you still be content and happy, with the most important things in your life you have left? If the answer to that question is no, then don't you think it's time you found happiness within? Instead of just looking beyond that and to other people and material objects in your life, which will give you a little satisfaction for a short time only, which are all purely false hopes. Life is truly amazing if you allow it to be and the moment you allow yourself to be happy and love yourself for who you are is the moment you will never look back on your life and only look forward and be so happy and positive about everything in your life. Life really is so simple, yet we insist on complicating it To help ourselves and our own bodies, prevention is far better than any cure. When you maintain your health and well-being, it is very unlikely you will suffer illness or disease. Rather than seeing yourself as the shell you are and placing the emphasis on that alone, instead turn it all around and focus on the inside and how you feel and think. This is the only way you will ever continue through the aging process and be happy and content through life. To reach optimum health and well-being is not something which will happen over night and to maintain this level is an ongoing process throughout one’s life. Every second of every day our bodies are changing due to our thoughts, thinking patterns, emotions, feelings and actions. Add to this the outside influences such as stress at work, lack of vitamins and nutrients and a good balanced healthy diet and no exercise and your body will begin to feel the strain. If you don’t listen to your body and make simple changes to give your body the right conditions to enable it to heal itself, it will without a doubt become in a diseased state which will manifest into illness later on in life. Chakra’s can be over stimulated as well as under stimulated and this can have positive or negative effect on our health. Colour’s are energy and carry different vibrations, therefore the colour of food we eat can affect our health. The colour of clothes we wear and are surrounded with each day also effect the chakra’s Lots of simple and easy changes can be made by everyone to maintain optimum health and well-being and Holistic Therapies will help clear any blockages or imbalances you may have which will be detrimental to your health should they remain in that state. Preventive measures are far better than anything else you can do for you body and mind and will help maintain good health throughout one’s life. Holistic Therapies treat the whole person, not just the symptom. Treating any symptom, such as conventional medicine, will NEVER CURE any disease or illness only mask the symptoms and usually lead to even more side effects, symptoms and problems in the body. When you take something which is not a natural source and place it into the body you are removing the bodies own natural defence systems which are in place. When you treat a person with Holistic Therapies you are dealing with the root cause of the problem naturally and the real issue behind any illness, disease or symptom, therefore once treated all symptoms will be eliminated in the process. Pain does serve a purpose and its the bodies way of telling us something is wrong or must be changed. The body will always give us indicators when something is not right enabling us to rectify it. However we have become such experts at ignoring the warning signs and alarms bell's or not giving our health the time is deserves that later down the line by continuing to ignore it we now have an even bigger problem on our hands. Holistic therapies such as colour therapy can be used and implemented into your life so simply and have life changing effects without having to change anything in your life. Also great for people so busy, who sadly have limited time for their health. The consultation covers numerous aspects of your health including mental, emotional and physical. Contrary to what you have been lead to believe, when you have emotional problems your physical health will be suffering. The longer the problem is left unresolved, the more likely the problem will manifest into a physical condition. When your emotional condition improves you are well on the way to recovery. The body is the most effective tool to treat any condition which we may have in life. If it is given the correct conditions, it can and will heal itself. The consultation is to deal with the root cause of the problem and not just the symptoms you have. It will give you all the tools to provide you with everything you need to give your body the right conditions to establish good health and with continued use enable you to maintain optimum health. Looking for a quick fix may be a short term solution but it’s not in the best interests of your body’s health, nor will it completely deal with issues which may arise again if you change your way of thinking back to your old pattern and habits. That would only be the same as filling your vehicle up with petrol once and expecting it to run indefinitely, which will never be the case. Problems which people have, don’t just appear over night. Although a session may have a very profound effect on improving your health, it can’t deal with all the issues in one go because your body would not be able to handle all those changes at the same time. Therefore continued therapy is advised to work through all issues, also as a preventative measure and to maintain the bodies correct balance. You know what issues/problems you have to deal with, therefore the biggest step is acknowledging them and starting to deal with them. You must also be ready and willing for all these changes to take place in your life because it will require a little input from you to enable them to happen. Your diet and what you eat. To establish weather it is a contributing factor to how you are feeling and whether your body is undernourished. The colour of food you eat affects your mind and body. The body’s functions are dictated by the chakra’s, main energy centre’s of the body. If you are eating the same foods all the time you will not be providing your body with the colour’s and vibrations which it requires. Every living entity on this planet carries a different vibration, so colour’s really do play an important role in your life. Not just the colour of food you eat, but the colour of clothes you wear, the colours you are surrounded by. Water plays a huge role in the workings and maintenance of the mind and body. Every single function we have as a human being requires the brain to be hydrated to enable the process to happen as it should. If the brain becomes dehydrated then those processes will suffer and not work correctly. Many people have become such experts at ignoring the thirst warning or mistaking it for hunger and reaching for food when the message is really thirst. When the correct amount of water is drunk in sufficient intervals during the course of the day many so called ailments and health issues could subside. I challenge you to try it and discover the magic power water can have for you

Blossoming Bellies

blossoming bellies

Brittany's path led her through many experiences before focusing her work on the need for respect and humility in the amazing power, instinct, and normalcy of birth. Completing high school after her junior year with distinguished honors and a focus in visual art and writing , Brittany went on to study Literature at Temple University, graduating cum laude with a Bachelor of Arts degree in English and certificates in both writing and honors. She maintains membership with Phi Beta Kappa, a national academic honor society. Throughout college, Brittany worked for Trio Upward Bound, a national organization that prepares inner city high school students for college. In her role as tutor and counselor, she gained experience in dealing with several different ages from ninth through twelfth grade, understanding of differences in learning pace and ability, and comfort in leading group discussions and projects. Brittany went on to substitute teach for pre-school through eighth grade at Frankford Friends School, strengthening her abilities in areas including the facilitation of group activities, the development of all aspects of the person - physical, academic, spiritual, emotional, and social, and the mentoring of children of all different ages and backgrounds. In addition to her education career, Brittany has completed a mentorship training program which focuses on peaceful solutions to conflict through listening, reflection, and understanding and the development of counseling skills. She attended a Birth Works three day workshop where she gained skills and techniques helpful in facilitating childbirth classes and providing labor assistance. She has also completed birth doula training by both DONA International and Birth Arts International. Brittany is a Birth WorksTM certified childbirth educator, a DONA certified birth doula, a certified breastfeeding counselor with Nursing Mothers Alliance, and a Certified Lactation Counselor through the Academy of Lactation Policy and Practice. She has also completed birth doula training with Birth Arts International. She also holds a Rebozo certification from Wise Birth Choices, L.L.C. Brittany continuously furthers her knowledge through regular attendance and facilitation at conferences, workshops, and lectures, in addition to her home studies, and her facilitation of workshops for clinical and non-clinical birth professionals. In an effort to make maternity care options available to all birthing people, Brittany volunteered her time in putting together the Philadelphia Guide to a Healthy Birth with Choices in Childbirth. Although the Philadelphia Guide is no longer in print, The National Guide is available online at www.choicesinchildbirth.org. Brittany has also been a frequent contributor to the Birth Works quarterly newsletter and wrote monthly for the e-newsletter, "Empowerment for Healthy Living," when it was published. She continues writing for the Birth Works blog. Brittany has been a guest speaker on several pregnancy, postpartum, and health-related topics at businesses around the Philadelphia area, including Martindale's Natural Market in Delaware County, Shanti Yoga Shala and Nest, both in Center City Philadelphia, and the Expectant Parents Boot Camp at The Please Touch Museum. In the spring of 2011, Brittany organized and facilitated a free community screening of the documentary, "Food, Inc." She worked with the non-profit organization WomenCare organizing an event featuring world-renowned midwife Ina May Gaskin in May 2011. Blossoming Bellies has also been featured in the July 2011 issue of herbalist Susan Weed's ezine "Wise Woman Herbal Healing with Susun Weed." In May of 2014, Brittany had the honor of being the only childbirth educator and doula serving as a panelist at the Birth Works "Ask The Experts" event held in Cherry Hill, NJ where she discussed birth options and answered community members' birth-related questions aside several distinguished birth professionals, including obstetricians, academics, pediatricians, and midwives, from the greater Philadelphia area. She was also honored to be a presenter at ICAN's (International Cesarean Awareness Network) meeting on birth education options in the Philadelphia area in January of 2015. Brittany is also the creator of two dynamic workshops focused on understanding the pelvis, the baby's movements and positioning as they descend and rotate, and preventing and working through complications that arise from malpositioning, "Creating Space: Pelvic Dynamics, Fetal Positioning, and Use of the Rebozo" for birth professionals and "Moving Through Labor" for expectant parents. She has had the honor of facilitating her workshop, "Creating Space," for obstetrical, midwifery, and nursing groups around the country. She is a guest speaker at the University of Pennsylvania for their student midwifery program and a frequent speaker at international conferences including the Birth Works International Conference in October of 2016, the ICPA Freedom for Family Wellness Summit in March of 2018, the Evidence Based Birth Conference in September of 2019, the Midwifery Forward 2020 conference, the ICEA 2020 Virtual Conference, and the Utah Doula Association Virtual Mini-Conference in 2020. She also facilitates pelvic dynamics and fetal positioning workshops for Maternity Care Coalition and PALS. She continues to facilitate workshops for conferences and private practices around the country. Blossoming Bellies began with Brittany teaching classes in her home in South Philadelphia. She still occasionally teaches classes in the coziness of her home but, after spending time teaching classes at South Philadelphia Community Acupuncture, The Nesting House on vibrant East Passyunk Avenue, and the community space Lilypad, she now teaches at the BOK building aside Justin Ohm of Ohm Chiropractic. She has also branched out to serving other areas of the city, including Mt. Airy, Fairmount, West Philly, Fishtown, and Center City. Brittany was a Birth Works facilitator at the Maternal Wellness Center in Mt. Airy and continued teaching Birth Works classes in Mt. Airy at The Nesting House (former location of the Maternal Wellness Center) and at each of their additional locations in South Philly, West Philly, and Collingswood, for several years. Her South Philadelphia series classes are now held at the BOK building in South Philadelphia, where she shares space with Dr. Justin Ohm, of Ohm Chiropractic . She brought group Birth Works classes to the Fairmount section of Philadelphia, facilitating workshops at Still Waters Holistic Health Therapies from 2010 through 2019 and to the Fishtown section of the city, teaching at City Sprouts until their close in November 2016 and at Minnow Lane on Frankford Ave through 2020. Brittany's Homebirth Preparation Class can be found at Ohm Chiropractic in South Philadelphia. Her prenatal Breastfeeding and Chestfeeding 101 classes and Infant Care classes are offered in Brewerytown at Kith + Kin and in South Philly at BOK. Check out an interview with Brittany about her philosophies and classes at Philly Baby Bump. Brittany also helps mentor and guide new doulas as they begin their journey into the birth world. Doulas often observe her classes to fulfill their certification requirements and Brittany facilitates workshops specifically for doulas and birth professionals looking to expand their knowledge and skills. In addition, she offers a full doula mentorship course for those looking for one-on-one guidance, resources, and referrals as they enter in to the greater birth community. For more information about doula mentoring and one-on-one options available, please contact Brittany. Blossoming Bellies has been recognized by CBS Philly as one of the Top Childbirth Classes in Philly and is the winner of the 2016 Love Awards for Best Lactation Consultant, the 2017 Love Awards for Best Prenatal Classes, and the 2018, 2019, and 2020 Love Awards for Best Childbirth Preparation Classes. She is also a contributor to the blog A Child Grows and the blog We Bloom in Philly and has written several feature articles for the Birth Works newsletter. Brittany is a contributor to the international best-selling book "Baby Got VBAC: An Inspiring Collection of Wisdom for Better Births After a Cesarean," writing a chapter covering the importance of movement and guidelines for using it in all births, with a focus on vaginal birth after cesarean. In addition, she is a sought-after presenter on pelvic dynamics, fetal positioning, preventing malpositioning in labor, and working through positioning issues that can lead to stalls in labor, facilitating workshops at the Birth Works International Conference, the Freedom for Family Wellness Summit hosted by the International Chiropractic Pediatric Association, the Evidence Based Birth Conference, and the Midwifery Forward 2020 conference as well as for midwifery and obstetrical practices, labor and delivery nurses, and midwifery students around the country. She also has collaborated with East Eagle Yoga to develop and facilitate a prenatal yoga teacher training program full of the bodily knowledge, movement awareness, and empathetic practice that is crucial to the role of a prenatal yoga instructor. Brittany also developed and facilitated the online ICEA training for birth professionals on anatomy and reproductive structure. You can check out interviews with Brittany on a few national podcasts. She was honored to be a featured guest on episode #161 of the well known podcast, The VBAC Link, where she talks all about pelvic dynamics and autonomy in birth. Check it out at The VBAC Link! She will also be featured on the Vagina Talks podcast in February 2021. Providing expecting families with information, resources, a listening ear, and love and support is at the core of Brittany's goals. In helping parents to recognize their strength as humans, role models, and advocates for the needs and wishes of themselves and their children, Brittany assists families in creating birth and parenting experiences of which they feel positive, confident, and informed. Her approach to birth and parenting focuses on building awareness of one's intuition and combining it with learned knowledge in a way that is respectful of the needs and abilities of each individual.

Moderntronics

moderntronics

Harrow,

In these terms and conditions (“Conditions”) the following expressions shall have the following meanings: “Business Day” means any day other than Saturday, Sunday or a public holiday. “Business Hours” means the hours detailed in Condition 32 below. “Contact Hours” means Monday to Friday (inclusive) from 07:00 hours to 17:00 hours but excluding bank holidays. “Contract” means any contract between MT and the Customer for the supply of Hardware and/or Software (with the associated Licence) and/or services which is subject to these Conditions. “Customer” means any person, firm or company who enters into a Contract with MT to which these Conditions apply. “Force Majeure” means any event outside the reasonable control of either Party affecting its ability to perform any of its obligations (other than as to payment) under these Conditions. “Goods” means all or any tangible or intangible goods or intellectual property including but not limited to Hardware and Software which are provided to a Customer in accordance with these Conditions. “Hardware” means any hardware provided by MT to the Customer. “MT” means MODERNTRONICS Ltd. or its servants and agents as the case may be. “Insolvency Event” means any one of the following in relation to the Customer: (i) a notice being issued to propose a resolution for winding up or dissolution, or such a resolution being passed; (ii) a petition for a winding up or an administration or bankruptcy order being presented, or such an order made; (iii)any steps being taken with a view to a voluntary arrangement or other assignment, composition or arrangement with all or any creditors or any moratorium, readjustment, rescheduling, forgiveness or deferral of all or any indebtedness; (iv) suspension of payments to all or any creditors and/or ceasing business; (v)an encumbrancer taking possession of all or any assets; (vi) an administrator or receiver being appointed over the Customer or all or any of its assets; (vii)any action anywhere similar or analogous to any of the foregoing; or MT reasonably believing that any of the foregoing is imminent. “Licence” has the meaning attributed to it in Condition 23 below. “Minimum Term” means the term set out in Condition 17 below. “Party” means MT or the Customer and “Parties” means both of them. “Response Time” means two Working Hours from an initial call to the hotline under Condition 26 or 28 below. “Seminar” means any seminar provided by MT. “Service Operator” has the meaning given to that term in Condition 28 below. “Site” means https://www.moderntronics.com and all subdomains including (but without limitation) “Software” means software or software updates or upgrades provided by MT and licensed to the Customer under Condition 23 below. “Training Sessions” means any training session provided by MT. “Working Hours” means the hours between 9:00 to 17:00 on any Business Day 2. Interpretation In these Conditions, the following rules apply: A person includes a natural person, corporate or unincorporated body (whether or not having separate legal personality). A reference to a Party includes its personal representatives, successors or permitted assigns. A reference to a statute or statutory provision is a reference to such statute or provision as amended or re-enacted. A reference to a statute or statutory provision includes any subordinate legislation made under that statute or statutory provision, as amended or re-enacted. Any phrase introduced by the terms including, include, in particular or any similar expression shall be construed as illustrative and shall not limit the sense of the words preceding those terms. A reference to writing or written includes faxes and e-mails. 3. General Information These Conditions apply when MT: sells and delivers Hardware; sells and delivers Licences; sells and delivers Software; or provides repairs or any other services to the Customer. They will also apply to other business transactions unless MT agrees that alternative special conditions apply. These Conditions apply to the exclusion of any other conditions that may be proposed by a Customer or implied by law (insofar as such exclusion is lawful). Part II Specific Provisions for the Use of the Online Shop Customers purchasing Goods from the Site, must read all Parts of these Conditions, which apply to them in full. 4. Consumers The Goods and services provided by MT are designed only for sale to and use by businesses in the course of their business activities. MT does not knowingly sell to any person dealing as a consumer or supply anything for personal use. 5. Customer’s Status By placing an order on the Site, the Customer warrants that he or she is: legally capable of entering into binding contracts and, where the Customer is an individual, that he or she is at least 18 years old; and is dealing in a business capacity and purchasing Goods and/or services for the purpose of his business and not for personal use. Part III General Conditions for the Provision of Goods and Services 6. Formation of Contract Quotations provided by MT to the Customer are not binding on MT. The Customer’s order constitutes an offer to MT to buy the Goods or services. All orders are subject to acceptance by MT. The offer will be deemed accepted, and a Contract formed, when MT sends the Customer confirmation that the Goods have been dispatched (“Dispatch Confirmation”) or, in the absence of a Dispatch Confirmation, when the Goods are delivered. The Contract will only relate to those Goods whose dispatch is confirmed to the Customer by a Dispatch Confirmation or if no Dispatch Confirmation is sent, those Goods which are actually dispatched. MT is not obliged to supply any Goods which may have been part of the Customer’s order until the dispatch of such Goods has been confirmed in a separate Dispatch Confirmation. Subject to Condition 17 below, an order for services will be deemed to have been accepted, and a Contract formed, when MT sends the Customer confirmation that the services ordered will be provided (“Service Confirmation”) or, in the absence of a Service Confirmation, when the services begin to be provided. Oral representations will only be binding upon MT if they are expressly confirmed in writing by MT to the Customer. 7. Price Unless MT expressly specifies prices to the Customer, MT’s current list of prices applicable at the time of the acknowledgement of order will apply. Unless otherwise agreed in writing, all prices are exclusive of value added tax, postage, freight, insurance, forwarding fees, installation and commissioning, travelling expenses and subsistence, which will be added as appropriate. MT will charge overtime for work outside of their normal Business Hours at up to 150% of the hourly rate from time to time applicable during Business Hours. Subject to Condition 16 below, prices are liable to change at any time, but changes will not affect orders in respect of which MT has already sent the Customer a Dispatch Confirmation or a Service Confirmation as the case may be. The Site contains a large number of products and it is always possible that, despite MT’s efforts, some of the products listed may be incorrectly priced. MT will normally verify prices as part of dispatch procedures so that, where a product’s correct price is less than our stated price, MT will charge the lower amount when dispatching the product to you. If a product’s correct price is higher than the price stated on our site, MT will normally, at our discretion, either contact you for instructions before dispatching the product, or reject your order and notify you of such rejection. MT is under no obligation to provide any Goods or services to the Customer at an incorrect (lower) price, even after MT has sent a Dispatch Confirmation or a Service Confirmation in relation to those Goods or services if such incorrect price could reasonably have been expected to be recognised by the Customer as an error. 8. Delivery and Availability The Customer’s order for Goods will be fulfilled by the delivery date in the Dispatch Confirmation or, if no delivery date is specified, then within 30 days of the date the Customer made his order (where such an order leads to a Contract). The period for delivery or performance of the Contract will normally commence on MT’s acknowledgement of the order. However, if the Customer is required to do anything before MT can effect delivery, MT will, as soon as practicable, notify the Customer accordingly. The time within which MT must deliver any Goods will run from the date on which MT receives notice from the Customer that it has duly complied with such notification from MT. Unless otherwise agreed in writing, any periods mentioned in the acknowledgement of order for services and Software development are based on a preliminary estimate of the required workload and therefore are approximate only. Time of delivery and performance is not of the essence. If MT fails to meet any delivery or performance dates set out in the acknowledgement of order and is solely responsible for such failure, the Customer may terminate the Contract but only after MT has been given an opportunity to rectify the situation and subsequently fails to meet the revised set of delivery or performance dates provided by MT to the Customer in writing. Unless MT has been deliberately or grossly negligent, all further claims of the Customer on the basis of the delay in performance are excluded. If MT cannot deliver or perform its obligations under the Contract due to Force Majeure or a failure of the Customer to cooperate or any other act, default or omission of the Customer, then MT will be entitled to perform its obligations under the Contract once the issue has been resolved, provided the issue occurred while MT was still allowed to deliver or perform and MT shall have no liability whatsoever for any delay or its failure to perform its obligations. 9. Agreed Performance Unless specified otherwise in writing, the agreed performance in respect of any repairs provided by MT, at the Customer’s request will be to adjust the relevant unit(s) to MT’s applicable standard specifications for that unit. Where the relevant unit(s) cannot be repaired to MT’s applicable standard specification due to the Customer limiting the repairs required or the time and money to be invested MT may exceed the Customer’s request if MT considers, at its sole discretion, that such additional repairs are reasonable and will ensure the proper functionality of the unit in question. The agreed performance levels for MT’s maintenance and care services are as set out in Conditions 26 and 28 below; for all other services the agreed performance levels will be as set out in the acknowledgement of order. 10. Refunds Where the Customer returns Goods (at the Customer’s cost) because he or she claims that the Goods are defective, MT will examine the returned Goods and will notify the Customer of its findings within a reasonable period of time. If MT (in its sole discretion) deems that the Goods are defective, MT may at its option repair, replace or provide a refund in respect of such defective Goods. MT will process any repair, replacement or refund as soon as practicable and, in the case of any refund, within 30 days of the day MT confirmed to the Customer that the Customer was entitled to the same. Such refunds will be made in full, including a refund of any delivery charges for sending the item to the Customer. 11. Import Duty If the Customer orders Goods for delivery outside the UK, they may be subject to import duties and taxes which are levied when the delivery reaches the specified destination. The Customer will be responsible for payment of any such import duties and taxes. Please note that MT has no control over these charges and cannot predict their amount. Customers should contact their local customs office for further information before placing an order. Customers must comply with all applicable laws and regulations of the country for which the Goods are destined. The Customer will indemnify and keep indemnified MT in respect of all costs, proceedings, losses and liabilities resulting from any breach by the Customer of any such laws. 12. Retention of Title to Property The Goods will be at the Customer’s risk from the time of delivery. Property in and title to all Goods will remain with MT until MT has received payment for the full price of all the Goods (and/or all other goods and/or services supplied by MT to the Customer under any other contract whatsoever).. The Customer may sell or use Goods in which title is retained during the course of their normal business, but may not give such Goods by way of pledge or pledge these Goods as security. Until the property in and title to the Goods passes to the Customer: the Customer shall keep the Goods properly stored, protected and insured and separate from all or any other goods whether belonging to MT, the Customer or any third party; MT shall be entitled at any time forthwith to revoke the Customer’s power to deal with the Goods; and such power shall automatically cease if an Insolvency Event shall occur in respect of the Customer; and the Customer shall not make any modification to the Goods, the Software or their packaging or alter, remove or tamper with any marks, numbers or other means of identification used on or in relation to the Goods. Upon termination of the Customer’s power to deal with the Goods, the Customer shall place the Goods at the disposal of MT and MT are hereby irrevocably authorised without the need for consent of any third party but using only such force as may be necessary, to enter upon any premises of the Customer or any third party for the purpose of removing the Goods. If third parties claim title to Goods with retained title, the Customer will inform MT without delay, will notify the person making the claim of MT’s title and will support MT in enforcing its rights, including taking all the necessary steps required to preserve MT’s rights, including commencing litigation at the Customer’s own expense. If the Customer breaches the Contract, e. g. by delaying payment, the Customer will be obliged to return the Goods with retained title if requested by MT, in return for which MT will not terminate the Contract. 13. Payment Where services, maintenance or care are provided on an ongoing basis, MT will invoice the Customer for these at the beginning of the billing period or as soon as reasonably practicable thereafter. The Customer will pay MT’s invoices in full within 30 days from the date of the relevant invoice. Depending on the scope of an order, payments for such services, maintenance or care are due either upon placement of the order by the Customer or upon partial delivery of the same of between 40 to 50% of their respective order value. BACS or cheque are the only methods of payment accepted. Invoices for Seminars and Training Sessions will be issued at the beginning of the respective session and payment is due immediately and without deduction. 14. Delay of Payment Where a Customer fails to pay an invoice by the due date, MT will be entitled to charge the Customer interest on all monies outstanding from the due date until the actual date of payment (both before and after judgment) at a rate of 8% above the base rate of the Bank of England calculated on a daily basis. 15. Setting-Off and Refusal of Payment The Customer cannot exercise any right of set-off in respect of amounts owed to or by MT. 16. Change of Pricing by MT for Ongoing Maintenance or Care MT may increase its prices for maintenance and services by giving the Customer written notice 2 months prior to the end of the Minimum Term. The Customer has 4 weeks from the date of receipt of the written notice from MT to object to the change. Where the Customer so objects, the Customer will be entitled to give notice to MT to terminate the Contract as of the date of the proposed price increase. 17. Automatic Extension of Contract Where services, maintenance or care are performed on an ongoing basis the Contract will come into effect upon acceptance by MT of the first order from the Customer for Software maintenance. The Contract will initially run until the date specified at “Minimum Service Duration” as set out in the “MT Service Product List” or until the expiry date where an expiry date is stipulated in the Contract (“Minimum Term”). Subject to one of the Parties serving written notice of termination on the other at least three months prior to the expiry of the Minimum Term, the Contract will be extended automatically. In the case of Software Licences supplied without a time limit, the Contract will extend until December 31st of the current year. The subsequent extension periods will begin on January 1st and end on December 31st of the respective year. In the case of Software Licences supplied with limited validity (e.g. a licence for 1-year) the extension is based on the terms and conditions set out in the description of the respective licence (e.g. extension by one further year). Unless otherwise agreed in writing, any extension to a Contract will be on the basis of MT’s current price list as at the date of such extension. 18. Delivery Obligations and Shipping The conditions for EXW (ex works) (MT’s premises or such other place referred to in the relevant order) as set out in the Incoterms 2010 apply to delivery of any Goods. Claims for any transport damages and any replacement of damaged Goods, remain with the Customer who is responsible for adhering to the mode and period for the filing of any claims with carriers, shippers and insurers. 19. Scope of Warranty (Material Deficiencies and Deficiencies in Title) MT warrants that the Hardware is free from defects in workmanship and material as at the time of transfer of risk; and warrants that the Software does not contain any flaws which void or substantially reduce its value or suitability for the usual or contracted purpose. Where MT is not the author of the Software, MT does not warrant that such Software will run without interruptions or errors, nor that MT will be capable of resolving all Software errors, nor that the Customer will be capable of achieving all of the functions included in the Software in all of the combinations chosen by the Customer, nor that these will meet the Customer’s requirements. MT will only warrant the quality and/or durability of Goods if it has expressly agreed in writing with the Customer that it will do so. The warranty period is 1 year. Where MT is the author of the Software such Software is subject to MT’s standard warranty. 20. Obligation to Inspect and Serve Notice of Defects The Customer must inspect the Goods upon delivery or repair and must notify MT in writing of any failure by MT to meet the specification within 7 days of delivery or repair or (where the failure was not apparent on reasonable inspection) within a reasonable time being no more than 1 month after discovery of the failure. Where the Customer fails to provide such notice MT will have no liability under its warranty. 21. Liability Subject only to Condition 21 d), MT shall not be liable to the Customer in contract, tort (including without limitation negligence) and/or breach of statutory duty for any loss or damage which the Customer may suffer by reason of any act, omission, neglect or default (including negligence) in the performance of the Contract by MT, its servants or agents, in a sum which is greater than GBP 200,000 per incident or series of connected incidents. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect loss of any kind resulting from these Conditions, its performance or any breach of its terms. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect economic loss of any kind including (but without limitation) loss of business opportunity, reputation, goodwill resulting from these Conditions, its performance or any breach of its conditions. Notwithstanding any other provision herein, nothing in these Conditions shall operate so as to limit or exclude MT’s non-excludable liability in respect of death or personal injury caused by the negligence of MT to exclude the application of Section 12 of the Sale of Goods Act 1979 and to exclude liability for fraudulent misrepresentation. MT’s liability for loss of data is limited to the effort required to restore the data from proper backups provided by the Customer. 22. Third Party Rights If any third party claims or takes action against the Customer, because Goods delivered by MT, or their use in accordance with the instructions provided by MT, purportedly violate their commercial rights or proprietary rights, then the Customer will inform MT of the same. MT agrees that they will assist the Customer in defending such claims. Where the claim is made to the Customer within 12 months of the date of delivery, MT will indemnify the Customer against claims provided that the Customer: appoints MT to defend the claims or to settle the dispute, and promptly notifies MT of any such claim, keeps the Customer informed of all information received and provides such reasonable assistance to MT as it shall reasonably require, does not defend the action itself without coordinating such defence with MT, and does not at any time admit liability or otherwise settle or compromise or attempt to settle or compromise the said claim or action except upon the express instruction of MT, the alleged breach of rights is not based on alteration of the delivered item used by the Customer, and does not use the item delivered by MT in conjunction with other items and/or in a fashion that breaches any such rights, in a situation where the use of the item as delivered by MT would not have breached the rights of the person who has filed the claim. MT may at any time and at its own expense acquire on behalf of the Customer the right to continue to use the Goods, to replace the Goods or alter them in such a fashion that the rights of others are no longer breached. If this is not possible, the Customer shall return or destroy the Goods if required to do so by MT who will reimburse the purchasing price for the Goods less depreciation. If the Customer refuses to do so, MT will no longer defend the claim or provide the Customer with any further support. The Customer has no further rights in case of disputes over proprietary rights with third parties and MT shall have no liability therefore unless MT could be blamed for acting deliberately or with gross negligence. Part IV Special Conditions for Delivery of Software 23. Conditions of Use for Delivered Software In the case of delivery of Software to the Customer, MT hereby grants the Customer a simple, non exclusive and non-transferable, licence to use the Software (“Licence”) . The validity of the Licence is not time limited, unless otherwise specified to the contrary in the terms and conditions of the Licence. MT, grants the Customer the use of such Software in the form of the object code and the user documentation with the use being restricted to one electronic data processing system at any one time and only for the tasks for which it is intended. Unless permitted by law, the Customer will not decompile the Software or perform reverse engineering. The Customer may duplicate the Software but only to the extent that this is required for the permitted use, and in order to allow it to perform data backup. Upon delivery of any Software, including updates and upgrades, the Customer will immediately produce a backup copy. MT may terminate the Licence granted to the Customer pursuant to this Condition 23 with immediate effect if the Customer is in breach of the conditions for the use of the Software for a period of 30 days from the date of a written notice of such a breach from MT or any third party. On termination of this Contract howsoever arising, the Customer will return to MT within 30 days all Software together with any related materials owned and licensed by MT and shall delete all copies and partial copies of the Software however stored within 7 days of service of the notice. Proof of such deletion must be provided to MT without delay. On receipt of prior written consent from MT, the Customer may retain a copy of the Software for the purposes of archiving. 24. Delivery of Software MT will only install the Software if this has been expressly agreed in writing between the Customer and MT. MT is able to provide telephone consultancy and support concerning questions relating to the application of the respective Software products as well as the solution of problems that may occur as provided for in Condition 26 below. 25. Prerequisites for Running the Delivered Software The proper running of Software systems supplied will only be guaranteed if the Hardware and operating system components used correspond to the reference systems of the respective manufacturer(s), as well as having been approved and certified. Unless otherwise agreed in the Contract, the Customer shall ensure that the provisions in this Condition 25 are complied with. Part VMaintenance and Care Application Software 26. Scope of Performance of MT Services for Application Software For the Software products, unless otherwise expressly agreed in writing, MT will provide the following services, denoted by Service Level “SW-Service STANDARD” and Service Level “SW-Service E-STANDARD”: Right to use Software and documentation updates: MT grants the Customer a non-transferable, non-exclusive Licence to use the Software and any documentation or updates. The right of use is not limited in validity, unless otherwise specified in the terms and conditions of the Licence. Software and documentation updates: MT will supply the Customer with the current version of the Software as specified in the Contract. This will be done as specified by the manufacturer of the Software. The documentation will be supplied in the form determined by the manufacturer of the Software. The installation of Software updates will be performed by suitably qualified personnel of the Customer. Alternatively for an additional charge, MT may install the Software updates on behalf of the Customer. Where the Customer has adapted the Software, the Customer will be liable for the additional cost of performing the same adaptation to the new version of the Software or alternatively the Customer may perform the necessary adaptation himself. Hotline (Service Level “SW-Service STANDARD” only) MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. E-mail Hotline (Service Level “SW-Service E-STANDARD” only) MT is able to provide e-mail consultancy and support in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours Wherever possible, qualified consultancy will be provided by MT within the Response Time. MT Hotline: E-mail: hotline@MT.com Internet: http://www.MT.com/customersupport Software error messages Where Software problems occur which MT is unable, for whatever reason, to resolve, the Customer may send a written error message to MT. The purpose of such an error message is to identify the error in the Software and enable the manufacturer to resolve the error. MT shall liaise with the manufacturer(s) of the Software products to resolve any Software errors as promptly as possible. Restoration of any data, regardless of the cause of the data loss, is not the responsibility of MT. 27. Obligation of the Customer to Co-operate Pre-conditions for the provision of the services by MT to the Customer are that the Customer has legally acquired the Software and holds a corresponding Licence to use it. In addition, the Software must be in the same condition that it was in when it was delivered. The services exclusively relate to the current release and delivered version of the Software. If earlier Software versions are used, a one-time update service which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Services will not be performed for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). If the operating system for the Hardware is not included in the Contract, the Customer must update the operating system to the most recent version (e. g. by purchasing updates) if this is required in order to use the new versions of the application Software. Hardware and Operating Systems 28. Scope of Performance of MT Maintenance and Care Services for Hardware and Operating System For Hardware products and the operating system, unless otherwise agreed in writing, MT will provide the following services, denoted by Service Level “HW-Service SPECIAL”: The scope of performance is briefly set out in the “Special Description” for each product listed in the attached “MT Service Product List”. The exact scope of performance will be determined in accordance with the attached description of performance issued by the respective MT service operator (“Service Operator” including but not limited to Hewlett-Packard, Fujitsu Siemens and Silicon Graphics). The following shall also apply: Hotline MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Hardware products and operating system, as well as the resolution, (in so far as it is reasonably practicable to do so) of any problems which may occur. This service will be performed by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. Where queries arise outside of the Contact Hours, the Customer should address such queries directly to MT’s Service Operator Response time for Hardware failures MT will use reasonable endeavours to solve a query within the Response Time. The Response Time shall be deemed to have been initiated either as soon as the customer service personnel arrives on the relevant site, or as soon as remote diagnosis is started, where either is required to resolve the problem. The appropriate Response Time will be determined in accordance with the attached description of performance issued by the respective MT Service Operator. 29. Services Not Included Unless otherwise agreed in writing, the following services will not be provided by MT to the Customer: a) Repair/re-acquisition of devices that have been damaged as a result of: incidents of war of any type civil wars, nuclear energy, deliberate action of the Customer (not of his subcontractors) b) Repair/re-acquisition that is required because of repair work or alterations of devices carried out by the Customer or any third party without the prior written consent of MT. c) Work required due to interface problems between MT’s devices and those of other manufacturers and suppliers. d) Customer service which is required because a product that is not covered under this Contract has caused an error. e) Customer service that has become necessary because devices have been used under adverse conditions (e.g. including contaminations and deviations from recommended room temperature and relative humidity) or in conjunction with accessories or (device-specific) consumables (e.g. including foreign disks, disk stacks, cassettes, printer paper and print heads of any type) (“Device Specific Consumables”) which do not meet the manufacturer’s specifications. f) Replacement of Device-Specific Consumables. g) Data backup. h) Calibration work that is not related to repair. 30. Restoration of Data/Programs The restoration of data and programs upon repair or replacement of a defective hard disk is limited to starting the copying program (Restore) used to restore the last full data backup. 31. Obligation of the Customer to Cooperate a) Hardware service Pre-conditions for the provision of Hardware services by MT are that the Hardware has been acquired legally and has been installed properly at the Customer’s site. In addition the Hardware affected must correspond to the current revision and be in proper condition when including in the Contract. These pre-conditions shall be met immediately after the expiry of the warranty period specified in the Contract. If the Hardware is included in the Contract at a later date, these pre-conditions must first be confirmed by a takeover inspection of the Hardware by MT, which will be independently invoiced and paid for by the Customer, and if required the pre-conditions will be achieved by MT undertaking the required repair work. b) Operating System Service Pre-conditions for the provision of operating system services are that the Customer has legally acquired the Software and has been granted the necessary corresponding Licence to use it. In addition the Software must be in the same condition as when it was delivered to the Customer. The services exclusively relate to the current release and version of the Software. If earlier Software versions are used, a one-time “Update Service” which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Operating System services will not be provided for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). Part VI Generally Applicable Conditions 32. Prices and Fees for Special Services The following items are not included in the payment for services under Conditions 26 and 28 above and will be invoiced separately in accordance with MT’s current price list: Services performed outside Working Hours on the express request of the Customer. Services to correct errors caused negligently by the Customer or by any unauthorised third party as a result of improper treatment, unsuitable operating media, unauthorised manipulations, Software manipulations, non-adherence to operating conditions or otherwise. ices required due to faulty handling, excessive vibration, chemical influence, excessive dust burden or non-adherence to the properties set forth in the unit specifications. Unreasonable wait times and delays in the performance of services which are caused by the Customer. Services to remedy failures caused by Force Majeure. 33. Backup of Customer Data Prior to the commencement of any service work undertaken by MT, the Customer will backup all data in such a way that it may easily be restored by MT in the event that it is lost in the service process. 34. Change of Installation/Application Site Where maintenance and care services are provided on an ongoing basis by MT, the Customer will immediately inform MT in writing of any change to the installation or application address. If such a change results in an increase in MT’s expenses. MT reserves the right to either increase the prices charged to recover the additional expense incurred or alternatively MT may serve notice on the Customer to terminate the Contract where the new address is outside United Kingdom. 35. Miscellaneous Service Conditions and Obligations of the Customer to Co-operate MT may appoint authorised third parties to provide services. The Customer may only transfer title to services to third parties with the prior written consent of MT. Where defective components or devices are replaced by MT, these will become the property of MT. Extension of the products included in the maintenance agreement may be included in this Contract with the consent of the Customer. On request, MT will offer to the Customer a corresponding extension of the Contract, provided maintenance for the respective product is available. Where MT has to perform any services, the Customer shall accurately and without delay provide MT with any/all information that is required to perform such services. The Customer will provide MT with the name of a competent and appropriately qualified contact person and will provide the name of an appropriate substitute in order for the Hardware and Software to be maintained. Any contact(s) will have participated in the respective Seminars and/or Training Sessions held from time to time by MT or alternatively will have acquired comparable knowledge. These contacts will be available to MT’s technicians on site or will have access to the MT’s hotline as applicable. Consumables and Auxiliaries (which shall include documentation, application programs, data, telephone lines for transmission of voice and data) are not included in the scope of performance and shall be provided by the Customer in the vicinity of the system, such consumables and auxiliaries will be provided during Working Hours or, with prior consultation, outside of these hours. Additionally, the Customer will provide to MT computing time and consumables as required. 36. Specifically Ordered Service Days If service days are ordered for call-off within a specified period, such orders are binding. The services will become due for payment once they have been performed or by the end of the defined time period at the latest. Specifically ordered service days to be called off within a defined time period, can still be called off during a time of three months beyond the expiry of such defined time period. Thereafter they are lost. The claim to payment is thereby unaffected. For users that register on our website (if any), we also store the personal information they provide in their user profile. All users can see, edit, or delete their personal information at any time (except they cannot change their username). Website administrators can also see and edit that information.

Courses matching "course"

Show all 50519

Driver CPC - 1 Day Periodic 7 Hour Course - Security Training & Emergency Aid

By Total Compliance

This 1-day Driver CPC Periodic Training course focuses on critical areas of Emergency Aid and Security for professional drivers. Designed to meet Driver CPC requirements, this course equips drivers with essential skills for handling emergency situations and enhancing security awareness on the road. Who Should Attend: This course is ideal for all professional drivers required to complete Driver CPC Periodic Training to maintain their Driver CPC Licence. It’s tailored to both experienced drivers and those new to the field, providing relevant, up-to-date skills and knowledge. Learning Objectives: The aim of this course is to confirm and expand on each driver’s current knowledge and skills, ensuring they are informed about the latest legislation, best practices, and critical safety procedures. This training is designed to enhance drivers’ confidence and preparedness in managing emergencies and maintaining security awareness, helping them navigate the responsibilities of their role effectively. Course Format: Online Join us to reinforce your skills, stay compliant, and improve your on-road safety practices!

Driver CPC - 1 Day Periodic 7 Hour Course - Security Training & Emergency Aid
Delivered Online + more
£69.95

Learn SQL Basics, 1-day Course, Online Instructor-Led

4.6(12)

By PCWorkshops

SQL Queries Course, 1-Day. Basic SQL syntax. This course is good for any database, covering standard SQL. Most attendees are in-work IT Professional. Private individuals are also very welcome.

Learn SQL Basics, 1-day Course, Online Instructor-Led
Delivered Online + more
£185

Microsoft PowerPoint for the Business User

By Nexus Human

Duration 1 Days 6 CPD hours This course is intended for This course is intended for people who use PowerPoint for their business communication needs. Overview To ensure your success in this course, you should have end-user skills with any current version of Windows, including being able to open and close applications, navigate basic file structures, and manage files and folders. This course is intended for those who wish to take advantage of the application for high quality business presentations and reports. Presentations Create Attractive Presentations from Existing PowerPoint Templates Creating Presentations Quickly using Outline to build a Structure Incorporating and reusing slides from other presentations into your own Templates and Customization Using Slide Layouts Using the Slide Master Creating Custom Slide Layout Working with Charts and Tables Create and Modify Tables Create Charts and Graphs Copying Charts into PowerPoint Link Vs Embed Add Visual Elements to a Presentation Create and Modify Shapes Add Images Create SmartArt to Make Easily Modifiable graphics Use SmartArt to Give Dull Text a More Visual Appeal Working with Media and Animation Add Audio to A Presentation Add Video to A Presentation Add and Customize Animations Add and Customize Transitions Preparing to Present Add Notes to A Presentation Presenter View And Slide Show Controls Create A Custom Slide Show Saving and Sharing the Presentation Printing Options and Handouts Additional course details: Nexus Humans Microsoft PowerPoint for the Business User training program is a workshop that presents an invigorating mix of sessions, lessons, and masterclasses meticulously crafted to propel your learning expedition forward. This immersive bootcamp-style experience boasts interactive lectures, hands-on labs, and collaborative hackathons, all strategically designed to fortify fundamental concepts. Guided by seasoned coaches, each session offers priceless insights and practical skills crucial for honing your expertise. Whether you're stepping into the realm of professional skills or a seasoned professional, this comprehensive course ensures you're equipped with the knowledge and prowess necessary for success. While we feel this is the best course for the Microsoft PowerPoint for the Business User course and one of our Top 10 we encourage you to read the course outline to make sure it is the right content for you. Additionally, private sessions, closed classes or dedicated events are available both live online and at our training centres in Dublin and London, as well as at your offices anywhere in the UK, Ireland or across EMEA.

Microsoft PowerPoint for the Business User
Delivered Online
£197

Watercolour Techniques for All - 4 week Online Course Tuesday Evenings Via Zoom

By Art By Purnima

Watercolour Techniques for All - 4 week Online Course Tuesday Evenings Via Zoom

Watercolour Techniques for All - 4 week Online Course Tuesday Evenings Via Zoom
Delivered Online + more
£95

C20M03 - Access control systems - Principles (online)

5.0(1)

By Ember Compliance

Learners will be introduced to the design, installation, commissioning, and maintenance of Access Control systems.

C20M03 - Access control systems - Principles (online)
Delivered Online + more
£199

SQL Course Advanced, 2 Days

4.6(12)

By PCWorkshops

Practical SQL Advanced Intensive Course , exploring the advanced and less commonly used SQL Statements and techniques. We also learn Data Definition Language and Data Manipulation Language statements. as well as course automation of queries using T-SQL. Hands-on, Practical SQL Advanced Course. PCWorkshops SQL Advanced Course Certificate. Max 4 people per course; we keep it personalised.

SQL Course Advanced, 2 Days
Delivered Online + more
£450

10-week Spanish course for Absolute Beginners (Level 1)

5.0(2)

By Pronounce Languages

An exciting 10-week course to build your Spanish skills from scratch. Practical applications for travel & conversation. Enlarge your vocabulary, improve your grammar in a pain-free, step-by-step way, working with a tutor with 10+ years' experience & a small group of learners.

10-week Spanish course for Absolute Beginners (Level 1)
Delivered Online + more
£120

The Candidate Journey

5.0(1)

By Noble Foods

The candidate journey is the process job applicants go through when interacting with Noble Foods. It encompasses every interaction in person and online, from the moment a candidate first becomes aware of us to the final hiring decision – and even beyond. You play a key role in the successful recruitment of new starters. It’s important that you have the skills to navigate all stages of the recruitment process to give the candidates the best experience, hire top talent and ensure we remain legally compliant. What does the course cover? What is the candidate journey and why is it important? The role of the line manager Legal Compliance The Noble Foods Candidate Journey How to fill out a Requisition How to post a job Selection Process Interviews Flexible Working Requests

The Candidate Journey
Delivered in Staines + 3 more or Online + more
FREE

Medication Awareness training for Acer Care

5.0(13)

By CH Care Training

Medication Awareness training is mandatory for all staff who are prompting or assisting clients to take their medications. About this event Medication Awareness training is for staff who have had never taken part in Medication training before or staff returning to the profession. By the end of the course, you will be able to: Understand medication types and uses Learn legal and ethical responsibilities Master medication administration procedures Know proper storage and disposal methods Recognize and respond to adverse effects Develop communication and record-keeping skills Apply person-centred approaches Conduct risk assessments. Location for delegates attending in person Online via Teams 0798 999 5180. sales@chcaretraining.co.uk Before you book: Please do not send along staff who have just worked a nightshift or who will be visiting clients immediately before or immediately after a training session. People arriving tired, stressed or late cannot gain the most benefit from a training course. We reserve the right to turn away individuals too exhausted to focus on the training or staff who turn up late for a course and disturb the flow of the proceedings. All CH Care Training courses are fully inclusive, but if you have any concerns about a member of staff's ability to participate because of physical, sensory or learning differences then please let us know in confidence in advance, so that we may make the appropriate adjustments. Cancellations CH Care Training operates a sliding scale of cancellation; If you cancel more than two weeks before the start date of a course, you can ask for a full refund, to change the names of the delegates being sent along, or to transfer a delegate to another training date. If you give less than two weeks but more than one week's notice of cancellation, 50 percent of the booking can be refunded. If you cancel less than a week from the training delivery date we wont be able to refund. There are no refunds for staff who do not turn up on the day of the training course. If CH Care Training needs to change the date or cancel a course for any reason we will give you the maximum notice we can. In exceptional circumstances we may cancel a course due to extreme weather or circumstances at the training venue. You will be offered a full refund or the opportunity to transfer your booking to an alternative date. Please ask your staff to read the following guidance before they attend the course: Arriving at the Venue The course will start promptly so please arrive at least 15 minutes before the start time of the training to allow plenty of time to use the toilet, and be seated ready for the start of the course. You can call Training direct on 0798 999 5180 if you are struggling to arrive on time. Please note that the meeting will be locked to late arrivals 10 minutes after the actual course starts. When you arrive please come into Reception and a member of staff will come to book you in prior to directing you to the training room. This room is located on the ground floor and is wheelchair accessible. Covid-Secure Premises Please do not attend the course if you have symptoms of Covid or are feeling unwell. During the course As this is a working environment please ensure you allow the necessary time and focus to get the best from the material being presented. Please bring pen and paper to make notes during the course. Our training sessions are fun and very interactive. We will encourage plenty of comments, points of view and the sharing of lived experiences. Delegates should not share any sensitive information about a client or organisation. Our session agreement asks delegates to maintain confidentiality about individuals and organisations and to respect the views of others on the course. All CH Care Training courses are inclusive, but if you have any concerns about your ability to participate, such as sensory or learning differences then please let the Trainer know in confidence before the start of a course, so that they may make the appropriate adjustments. If the course contains practical elements such as Moving & Handling or First Aid, then please wear appropriate clothing to take part in these activities. You will be asked confidentially if you have any health concerns that could prevent you from taking part in the practical activities. Please let a Trainer know if you have any concerns about taking part in the practical courses. Refreshments are provided for free. Please bring a packed lunch for any full-day courses. After the course We will email you a pdf of the course once the training has finished and we have checked that everyone was able to join. If your Manager booked you onto the course using your work or personal email, or if you book yourself onto a course, you will receive the pdf directly. If your Manager booked you onto the course using your organisation’s email address a copy of the course will be available on request from your Manager. We will also email a link to an online evaluation and we ask that you please fill this in and return it to us so that we can continue to improve our services. All of our evaluations are gathered anonymously. If you have any questions, please contact Training on 0798 999 5180 or email sales@chcaretraining.co.uk.

Medication Awareness training for Acer Care
Delivered Online
£35

Rally Navigation - Regularity for Improvers

By Rally Navigation Training Services

Historic Road Rallying training webinar on Regularity focusing on Average Speed Table style regularities.

Rally Navigation - Regularity for Improvers
Delivered Online + more
£30