50442 Courses in Cardiff delivered Online

Driver CPC - 1 Day Periodic 7 Hour Course The Compliant Driver / Trailer Checks and 3rd Party Trailers Join our online course from Total Compliance, designed to build your expertise in being a compliant driver and conducting essential trailer check. Driver Compliance: Understanding the responsibilities and legal requirements for maintaining compliance on the road. Trailer Checks: Conducting thorough pre-use and post-use trailer inspections to ensure safety and efficiency. 3rd Party Trailers: Best practices for managing and operating third-party trailers, including checks, handling procedures, and risk mitigation. Don't miss out on this opportunity to improve your driving practices! Please review our Terms and Conditions for more information.

This qualification aims to provide expert guidance to learners wishing to gain knowledge and understanding on Electric Vehicle charging equipment installation. This 2 day course provides expert guidance on EV charging equipment installation, an important emerging area which is not covered in detail by the current edition of the Wiring Regulations (BS 7671) or the IET’s Guidance Notes. Aimed at experienced electricians interested in understanding a wide range of equipment and systems available, this course applies to the specialised installation requirements of electric vehicle charging equipment in domestic dwellings, on-street locations, commercial and industrial premises. The course provides detailed guidance and recommendations on all aspects of the installation of Electric Vehicle Charging Equipment from the origin of the electrical supply, through distribution and final circuits, installation of the charging equipment itself to the cable between the charging equipment and vehicle’s electrical inlet. Also included are related issues of site layout and planning and subsequent inspection, testing, certification and maintenance of installations. Why take this course? Currently there is an increasing demand for new electric vehicle charging points but too few installers to roll them out. This is already a booming market which is due to get much bigger in the near future. The number of public charging connectors and locations has increased by 38% in the past 12 months and is expected to continue at that rate for years to come. Entry Requirements There are no formal entry requirements for this qualification, however we do expect you to meet the following requirements: Minimum age 18 years old (mandatory) Must be able to demonstrate the following competencies Be able to correctly install and terminate: pvc/pvc cable (twin and earth) Steel Wire armoured cable (swa) Be able to carry out an initial verification (inspection & testing) on an electrical installation and complete the necessary paperwork. Please Note: These competencies are required for the assessment and are not taught as part of the course. It is also recommended that you are up to date with your wiring regulations.

This EV charging course is intended to provide expert guidance to learners wishing to gain knowledge and understanding on Electric Vehicle charging equipment installation. This 2 day course provides expert guidance on EV charging equipment installation, an important emerging area which is not covered in detail by the current edition of the Wiring Regulations (BS 7671) or the IET’s Guidance Notes. Aimed at experienced electricians interested in understanding a wide range of equipment and systems available, this course applies to the specialised installation requirements of electric vehicle charging equipment in domestic dwellings, on-street locations, commercial and industrial premises. This training course provides detailed guidance and recommendations on all aspects of the installation of Electric Vehicle Charging Equipment from the origin of the electrical supply, through distribution and final circuits, installation of the charging equipment itself to the cable between the charging equipment and vehicle’s electrical inlet. Also included are related issues of site layout and planning and subsequent inspection, testing, certification and maintenance of installations. Also Covering: How EV charging works How to select the correct EV Charging Point Solution for the customers needs. Technical requirements of installing & the use of different earthing arrangements (TN-C-S/TT systems) Planning requirements, labelling & risk assessments How to carry out surveys & Pre Installation considerations Meeting the requirements of BS7671 Awareness of the IET code of practice for Electrical Vehicle Charging Equipment & Installation. Plus much more Why take this EV charging course? Currently there is an increasing demand for new electric vehicle charging points but too few installers to roll them out. This is already a booming market which is due to get much bigger in the near future. The number of public charging connectors and locations has increased by 38% in the past 12 months and is expected to continue at that rate for years to come. Add this important service to future proof your knowledge to allow extra inspection & testing plus new installation work with this electric vehicle charging course. We have a variety of charging units and simulated installs which means it is just as working on a real installation. Making this installers course real value for money.

Learn how to test portable electrical appliances with a qualification in Electrical Equipment Maintenance and Testing. Aimed at practicing electricians this qualification will help and progress individuals within the Electrotechnical industry. This qualification is aimed at those with responsibilities for the maintenance of electrical equipment and for those undertaking practical inspection and testing of electrical equipment. It allows those with the responsibility for the testing and inspection of electrical equipment to gain a qualification suitable to their job role. The qualification allows candidates to learn, develop and practise the skills required to inspect and test items of electrical equipment in line with the latest edition of the Code of Practice for In-Service Inspection and Testing of Electrical Equipment. If you already work as an electrician it will add another string to your bow and can help you move up in the industry. Learners completing the qualification will have the ability to carry out mandatory responsibilities within the workplace depending on their prior electrical knowledge This level will suit you if you are a practising electrician either involved in, or looking to become involved in, the inspection and testing of electrical equipment. To successfully complete the qualification learners will have to sit an Evolve on-line test comprising of a 50 MCQ and a practical assignment. The practical consists of 3 tasks which are: Task 1 is inspect and test Class I equipment, Task 2 is inspect and test Class II equipment (this will be either unearthed metal or without unearthed metal or Class II FE – Learners will not need to do all 3 of these, they only need to do one type), Task 3 is completing the record forms

Join Mark on Thursday mornings to move, explore, and wake up to your true nature. Mark's classes are all about re-connecting the body and mind in order to find a sense of health, integration, freedom and kindness. Most of the time his classes are based around the seasons, since the Chinese energy system is very connected to the time of year and changing seasons.

🌿 Guided Minds: A 12-Month Meditation Journey Create calm, clarity & connection—one month at a time. Guided Minds is a year-long meditation programme designed to help you build a sustainable, enriching practice through monthly themes, supportive sessions, and practical tools for real life. Whether you're new to meditation or looking to deepen your experience, this programme will guide you with compassion and clarity. 🔁 Programme Format Weekly Live Sessions (Online & In-Person) Monthly Themes & Challenges Guided Meditations & Practices Supportive Community Access to Session Recordings Join monthly or commit to the full journey—the choice is yours. 🌟 Monthly Themes Overview July: Making Meditation a Healthy Habit Learn how to create a sustainable daily practice using breath, posture and science-backed techniques. ✔️ Relaxation response ✔️ Meditation for clarity & calm ✔️ Core practices: breath, posture, stillness ✔️ In-person Session 5: “Pulling It All Together” August: Meditation & Mindfulness Focus on the profound benefits of meditation: ✔️ Stress relief, heart health, immunity ✔️ Slowing ageing, boosting self-compassion ✔️ 3 Principles: Habituation, Wisdom, Openheartedness ✔️ Diamond Dedication Meditation September: Calming a Wandering Mind Tame your busy mind through simple, powerful practices. ✔️ Focused attention vs. mind-wandering ✔️ Thought loops & rumination ✔️ Colour, mantra & visualisation meditations ✔️ Mindfulness of thought October: Creating a Mindful Life Bring mindfulness into everyday moments. ✔️ Living in the now ✔️ Radical acceptance & surrender ✔️ Senses as anchors: sound, touch, breath ✔️ Showing up fully for life November: Meditation for Stress Relief Practical methods to manage stress & emotional overload. ✔️ Good vs. bad stress ✔️ The ego, fight/flight, and impermanence ✔️ Gratitude & visualisation ✔️ Overcoming obstacles to meditation December: Rest & Reflection Warm the heart and calm the mind before the holidays. ✔️ Body-based awareness ✔️ Reviewing your progress ✔️ Meditations for resilience ✔️ Peaceful practices for winter January: Meditation for Positive Emotions Start the year with joy, love, and purpose. ✔️ Heart-opening meditations ✔️ Gratitude & happiness ✔️ Intention-setting with optional cacao ceremony ✔️ Emotional healing & connection February: Meditation for Well-Being A holistic approach to health from the inside out. ✔️ Four foundations of mindfulness ✔️ Forgiveness (including Huna meditations) ✔️ Body-mind connection ✔️ Compassion and curiosity March: Deeper into Meditation Explore advanced techniques with renewed clarity. ✔️ Insight, wisdom, open-heartedness ✔️ Posture & Nine-Cycle Breathing ✔️ Concentration & mental clarity ✔️ Appreciation for life April: Meditation for Relaxation Recharge your nervous system with rest-focused meditations. ✔️ Body scan & breath awareness ✔️ Guided deep relaxation ✔️ Calming anxiety & overactivity ✔️ Rest as a radical act May: The Art of Living Live with intention and reverence. ✔️ Meditation on impermanence & emptiness ✔️ Self-love & emotional nourishment ✔️ Present moment awareness ✔️ Breath as a life companion June: Meditation on Inner Peace End the year rooted, spacious, and unshakable. ✔️ Letting go of resistance ✔️ Unflappability & mental resilience ✔️ Responsibility & self-awareness ✔️ Lasting inner calm and clarity 💷 Pricing Options Online sessions: £10 each In-person sessions: £15 each Join the Guided Minds Meditation Community for £28/month ✓ Includes all sessions (online & in-person) ✓ Unlimited access to recordings ✓ Bonus practices & group support 🌱 Ready to begin? Each month offers a new opportunity to reset, reflect and grow. Join any time, or commit to the full year and transform your relationship with your mind, body and life.

This one-day course is a must for anyone considering or already working within a construction or civil engineering environment. This course provides Health and Safety awareness and is endorsed by Build UK as a standard training for all operatives on site. Aims To give a clear understanding of Regulations & Legislation that applies to construction work and is an ideal refresher for any operative that has previously completed training in Health & Safety. Course Content • Accident prevention • Health & Safety law • Control and management of the site and your how your role fits in with this • Risk assessments and method statements • Performing safely on site • Reporting unsafe acts to prevent an accident • Individual & employee responsibilities • What to do if you think anyone’s Health and Safety is being put at risk Assessment At the end of this course, all delegates will have a clear understanding of the requirements of Health and Safety Legislation and their responsibilities to comply with them. Candidates will need to complete a multiple-choice exam at the end of the CITB course. They will also need to engage and interact with others throughout the day. Certificate This certification for this course is valid for 5 years and is endorsed by Build UK as a standard training for all operatives. The certificate is part of CSCS Green Card requirements. To remain certified in this area, you will need to retake the course before the expiry date or have completed an NVQ2 or higher in your skills set. Instructions Please note all Health & Safety Awareness courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

Our CITB Online - Site Supervisors’ Safety Training Scheme (SSSTS) Refresher course is designed to give attendees a broad reminder of their responsibilities for health and safety on construction sites. Approved and endorsed by the United Kingdom Contractors Group, the SSSTS refresher course is a must for anyone who occupies a supervisory role on UKCG sites and wants to brush up on their knowledge of their legal responsibilities and the latest construction industry regulations. The SSSTS Refresher course has been created to provide existing supervisors, or those who are just entering into a supervisory role, with in-depth knowledge of health and safety legislation and procedures. If a candidate completed a full SSSTS training course up to 5 years ago, they will be required to attend a refresher programme. Prerequisites SSSTS certificates are of course valid for up to 5 years, but due to the ever-changing nature of the industry, it is recommended that staff stay up to date by enrolling on a refresher course long before the qualification expires. Instructions Please note all Site Supervisor Training courses with the venue “Remote Learning” will be delivered by a tutor over a video call. This training will be delivered and assessed in English language; therefore, a good standard is required to complete the course. Further attendee information will be sent in a separate email, please check your inbox.

Our comprehensive online course offers a deep dive into Urban and Rural Driving, Working at Height. Whether you are a seasoned driver or just starting out, this training will equip you with essential knowledge and skills to navigate various road conditions safely and efficiently. Urban and Rural Driving, Working at Height Training Content: Urban Driving Techniques: Develop strategies for navigating busy city streets, including managing traffic congestion, negotiating junctions, and adhering to specific urban regulations. Rural Road Safety: Learn how to adapt your driving style for rural roads, including handling narrow lanes,unpredictable bends, and potential hazards like livestock and wildlife. Working at Height: Learn essential training on safe practices for working at height, covering risk assessments, equipment usage, and compliance with safety regulations. Learn to identify hazards, use fall protection systems, and ensure a safe working environment. Join us to enhance your vehicle safety knowledge, compliance with legal requirements, and improve your driving skills in diverse environments. Register today to be better prepared for a wide range of driving challenges. Please review our Terms and Conditions for more information.

Time and space for you to reconnect with your intuitive guidence in gentle restorative community.