13074 Courses in Cardiff delivered Online

Students who complete PV202 will be able to: Define the purpose of the National Electrical Code (NEC®) and NEC® terminology for PV equipment Determine procedures for proper installation of equipment and conductors, including minimum requirements for working space Examine methods for PV wire management and determine where expansion fittings are required Describe and identify electrical services, including split-phase and three-phase Wye (Y) and Delta (∆) Evaluate electrical service details to collect and record during solar site evaluation Identify options for NEC®-compliant PV system interconnection to the utility grid and determine whether a supply side, load side, or additional service connection is appropriate Identify code-compliant methods for connecting an inverter to an existing AC feeder Calculate PV module voltage based on temperature to ensure compatibility with system components and NEC® Section 690.7, and explore other options for maximum PV system DC voltage calculations Identify NEC® requirements and sizing of disconnects and overcurrent protection devices (OCPDs) in grid-direct PV systems Define inverter grounding configurations Evaluate inverter choices and system configurations, including string inverters, central inverters, and module level power electronics (MLPE) Identify requirements for equipment grounding, equipment grounding conductors (EGC), and grounding electrode conductors (GEC), and size the conductors according to the NEC® Identify common causes of ground-faults and arc-faults Describe ground-fault and arc-fault protection devices Describe benefits and appropriate locations of surge protection devices (SPD) Demonstrate the use of sun charts and perform calculations to determine row spacing and minimize inter-row shading Identify how Codes detailing access for first responders impact PV array roof layout Examine fire classifications that affect racking and module selection Detail NEC rapid shutdown requirements and options for implementation Identify load and structural considerations for low- and steep-slope roof-mounted PV systems Calculate wind uplift force and select appropriate lag bolts Review issues related to planning, design, and installation of ground-mount PV arrays Review PV system circuit terminology, definitions, and conductor types Calculate minimum overcurrent protection device (OCPD) size and conductor ampacity using appropriate adjustment and correction factors Calculate voltage drop and verify system operation within acceptable limits Examine requirements for PV system labeling Calculate the maximum and minimum number of modules per PV source circuit, and number of PV source circuits per inverter Determine size of residential grid-direct PV system based on site and customer-specific considerations including the number and wiring layout of modules, conductor and OCPD sizes, and the AC interconnections Determine the size of a large, multiple inverter, grid-direct PV system based on site and customer-specific considerations, including the quantity and layout of modules and inverters and the AC interconnection Define large-scale PV and review associated NEC® allowances and requirements Describe importance of Data Acquisition Systems (DAS) Identify common DAS equipment and hardware Review DAS design, installation, and commissioning processes and common problems associated with DAS Show how reports can be generated and utilized to remotely assess health of system

Are you a teacher looking to obtain QTLS - Qualified Teacher Learning and Skills status or enhance your teaching skills? You are at the right place! This comprehensive Level 5 Diploma in Education and Training | DET will equip you with the required skills to work as a teacher in the UK. This nationally recognized education and training diploma will help you advance to higher studies and become a well-trained teacher in the field of lifelong learning. No Previous Experience Needed Available to individuals from all backgrounds, regardless of their previous work experience Unlimited Tutor Support With endless support from an expert tutor, learning has never been simpler Recognised Qualification Ofqual regulation and NCFE accreditation make this course a highly reputable qualification in the industry Interest Free Instalment Plan Pay in 12 interest-free instalments and spread the cost of your purchase over time Fast Track Accelerate your success and start your rewarding career faster with the fast track program Exam Pass Guarantee We are committed to your success and will work closely with you to ensure your success in the exam Diploma in Education and Training (DET) and Post Graduate Certificate in Education (PGCE) are the same qualification. The employers do not discriminate based on the title or where you obtained the qualification. This DET qualification will help to get Qualified Teacher Learning and Skills (QTLS) status. QTLS is a professional status recognised in the Education sector. Course Highlights Course Type: Online Learning Guided Learning Hours (GLH): 360 Hours Teaching Practice Hours: 100 Hours (8 hours of observations of teaching practice) Accreditation: NCFE Qualification: Ofqual Regulated Access: 1 Year Access Certificate: Certificate upon completion (hard copy) Tutor Support- Personalised feedback on all your assignments Customer Support: 24/7 live chat available Level 5 Diploma in Education and Training This Level 5 Diploma in Education and Training | DET will set you up with the appropriate qualifications and adequate credentials that are required for you to have expertise in the field of teaching. NCFE accredits and Ofqual regulates this course, which enhances your resume as a nationally recognised qualification. Upon successful completion of this course, you will gain extensive teaching skills and knowledge to evaluate, create resources, and assist students to reach their full potential.  Learning Outcomes By the end of this Level 5 Diploma in Education and Training | DET, you will: Learn to plan and deliver inclusive teaching using various approaches and models. Use behaviour management techniques to create a safe and welcoming environment. Evaluate learning using assessment theories and reflective practices. Understand how to conduct diagnostic assessments and organize inclusive teaching. Recognize the importance of professionalism and accountability in education and training. Support quality assurance and improvement efforts and understand education policies. Who should take this course? This extensive Level 5 Diploma in Education and Training is suitable for:  Aspiring teachers Anyone looking to teach young people at school Anyone looking to teach adult people at a higher education level Anyone aiming to achieve Qualified Teacher Learning and Skills Status (QTLS) Entry Requirements This Level 5 Diploma in Education and Training | DET is available to all students of all academic backgrounds. No experience or previous qualifications are required.  Applicants must be 19 years of age or over. Before pursuing level 5 education and training, individuals are not required to have completed level 3 or level 4 education and training. Assessment structureAssignment Students must complete a number of brief assignments for each section of the award. The guidelines are designed to assess you according to the following criteria. Each of the ten modules in this qualification has assignments. The assignments can include calls for product evidence such as lesson plans, teaching materials, and other related paperwork. Completing these assignments will allow you to fully engage with and apply the teaching and learning cycle, with feedback provided by your tutor after review. Teaching Assessment In order to properly evaluate your teaching skills, you must submit a teaching assessment that will be based on the following guidelines: You must observe for a minimum of 8 hours. Each observation should last at least 30 minutes. This means you can do 16 observations at 30 minutes or 8 observations at 1 hour each. Either way, you must complete 8 hours of observation. A teacher with appropriate credentials must complete this witness testimony. In exceptional cases, we may also arrange a video link with your tutor to complete these observations. For this training, there is no prerequisite in terms of prior experience. To get your completion certificate, however, you must complete 100 hours of classroom teaching experience throughout the course. You will need to find an expert witness with a level 5 diploma in education and training to observe your practical teaching demonstration. If you prefer, we can help you by providing an expert witness for an additional fee of £250 + VAT for 8 hours. You'll have to keep a record of teaching practise hours and observations in the provided teaching log. Additionally, you'll need to provide a teaching record and documentation of continuous personal development As previously stated, one must observe practice for at least eight hours. These observations must correspond to the following essential units: Teaching, learning and assessment in education and training (level 4) Developing teaching, learning and assessment in education and training (level 5) Progression Opportunities Upon successfully attaining the NCFE Level 5 Diploma in Education and Training, you can: Work towards attaining Qualified Teacher Learning and Skills (QTLS) Improve your chances of getting a promotion Obtain employment in a variety of teaching roles Course Curriculum Course Overview Course Overview - Level 5 Diploma in Education and Training Lesson 1: Roles Responsibilities of Teachers in Education Learning Lesson 1: Roles Responsibilities of Teachers in Education Learning Lesson 2 : Pedagogical Principles Theory and Practice Lesson 2 : Pedagogical Principles Theory and Practice Lesson 3 : Functional Skills and the Minimum Core Lesson 3 : Functional Skills and the Minimum Core Lesson 4 : Planning in Education and Learning Lesson 4 : Planning in Education and Learning Lesson 5 : Selecting, Creating and Using Resources Lesson 5 : Selecting, Creating and Using Resources Lesson 6 : Augmenting Communication through Teaching Strategies Lesson 6 : Augmenting Communication through Teaching Strategies Lesson 7 : The Assessment Process Lesson 7 : The Assessment Process Lesson 8 : Managing Learners Lesson 8 : Managing Learners Lesson 9 : Professionalism and Continued Professional Development Lesson 9 : Professionalism and Continued Professional Development Lesson 10 : Developing Designing Curriculum Lesson 10 : Developing Designing Curriculum Lesson 11 : The Professional Practice Quality Management Lesson 11 : The Professional Practice Quality Management Additional Resource Additional Resource - Level 5 Diploma in Education and Training Assignment 1: Developing Teaching, Learning and Assessment in Education and Training Assignment 1 - Developing Teaching, Learning and Assessment in Education and Training Assignment 2: Teaching, Learning and Assessment in Education and Training Assignment 2 - Teaching, Learning and Assessment in Education and Training Assignment 3: Theories, Principles and Models in Education and Training Assignment 3 - Theories, Principles and Models in Education and Training Assignment 4: Wider Professional Practice and Development in Education and Training Assignment 4 - Wider Professional Practice and Development in Education and Training Assignment 5: Develop Learning and Development Programmes Assignment 5 - Develop Learning and Development Programmes Assignment 6: Identify the Learning Needs of Organisations Assignment 6 - Identify the Learning Needs of Organisations Assignment 7: Internally Assure the Quality of Assessment Assignment 7 - Internally Assure the Quality of Assessment Assignment 8: Understanding and Managing Behaviours in a Learning Environment Assignment 8 - Understanding and Managing Behaviours in a Learning Environment Assignment 9: Understanding the Principles and Practices of Internally Assuring the Quality of Assessment Assignment 9 - Understanding the Principles and Practices of Internally Assuring the Quality of Assessments Assignment 10: Working with Individual Learners Assignment 10 - Working with Individual Learners Recognised Accreditation This Level 5 Diploma in Education and Training | DET is independently accredited by NCFE and regulated by Ofqual. It is a nationally recognised qualification that will help you pave your path to higher education and fulfil the entry requirements of any skilled-oriented job. About NCFE The National Council for Educational Awarding (NCFE) is a national educational awarding organisation that creates, develops, and accredits a range of widely accepted qualifications and awards, including those for online courses. The NCFE Functional Skills certificate is the best option for students who want to gain useful, transferable skills that will enable them to function freely, with self-assurance, and effectively in the real world. Certificate of Achievement Upon successful completion of this Level 5 Diploma in Education and Training | DET and passing the internal assessments, and practical teaching assessments, you will be awarded the qualification: NCFE Level 5 Diploma in Education and Training which is valued by all employers in the UK and globally. FAQs What is a level 5 diploma equivalent to? The Level 5 Diploma in Education and Training qualification is equivalent to the Certificate of Education (CertEd). Additionally, it is equivalent to the second year of a bachelor's degree in the UK. What can I do with a Level 5 diploma in education and training? You can advance to further vocational study, apply for Qualified Teacher Status (QTLS), and earn a Bachelor of Arts in Education or a BA in Education (BEd). Besides these progression opportunities, you can also enhance your resume and increase your chances of getting hired. What is a BTEC equivalent to? BTEC Firsts are Level 2 qualifications, which are the same as GCSE coursework. The level of BTEC Nationals is Level 3, which is the same as A-level study. BTEC Higher Nationals are at the same academic level as the first two years of a degree program (Level 4/5 studies). Do I have to conduct my practical evaluation in a real classroom or workplace? For the Level 5 Diploma in Education and Training qualification, you must be seen teaching in an actual classroom; simulation is not allowed, and your observations must be conducted in an actual classroom. Who should complete the course's observations for the practical evaluation? This witness testimony must be provided by an expert with a Level 5 Diploma in Education and Training. For an additional charge of £250 + VAT for 8 hours, if you'd prefer, we can also assist you by providing an expert witness. How is this course assessed? The course is evaluated through the submission of eight observations of your teaching in a classroom environment and writing assignments based on the course's sections. You will also be required to provide an evidence log showing that you have completed at least 100 hours of teaching. Can I submit my assignment again? Your instructor will provide feedback and the option to resubmit assignments if additional work is required. How can I produce evidence to support my lessons? The teaching session must be recorded using a smartphone, tablet, or other camera device and uploaded to your web portal in order to be graded. In addition to that, you must also provide product evidence such as lesson plans, teaching materials, and other related paperwork How much time will it take to complete this course? For the supervised study, 360 hours are allotted. However, the total amount of time we anticipate you to spend on this award, including all the research and writing tasks is 1200 hours. These hours can be distributed in any way you desire as you have the choice to complete the course whenever it's convenient for you over the course of a year. Should I obtain the level 3 award or the level 4 certificate before taking this course? It is not necessary to have finished the level 3 award in education and training or the level 4 certificate in education and training before enrolling in this course. Will this course qualify me for the Qualified Teacher Learning and Skills Status (QTLS)? The Level 5 Diploma in Education and Training will provide you with the opportunity and skills to apply for QTLS, while it does not automatically grant you this status. For how long can I access this course? You have a year to access this course, so you can complete it at your own pace and convenience. Can I teach infants and children with a level 5 diploma in education and training? Since the majority of the training is geared toward adults, you won't be able to work with young children or teach in primary settings. Do I have to finish the 100 hours of teaching before I sign up for this course? There is no prerequisite in terms of prior knowledge for this training. However, you must complete 100 hours of classroom teaching experience throughout the course to receive your completion certificate. Can I use a smartphone or a tablet to study? With no time limit on completion, our online courses are accessible for life. If there is a safe internet connection, every course is fully accessible from a tablet, phone, or laptop. What will I receive once the course is over? You will be able to order the NCFE-recognised Level 5 Diploma in Education and Training, which is governed by Ofqual, after completing the assignments and the teaching assessment. What is the difference between Level 3, Level 4 and Level 5 Education and training? Education and training levels differ in the depth of knowledge and skills acquired. Level 3 is foundational, Level 4 is subject-specific, and Level 5 is for higher expertise. Completing Level 5 can lead to Qualified Teacher Learning and Skills status. To be able to teach Level 2, one must undertake Level 3; for both Level 2 and 3, Level 4 must be completed; and for all three levels, one must take Level 5. What is the difference between QTS and QTLS? QTS is for teaching up to age 16, while QTLS covers beyond that. QTS is necessary for teaching young students, while QTLS is ideal for teaching at a higher education level. QTS requires an intensive course with work practice, while QTLS requires sector competence and 100 hours of teaching experience.

https://www.lloydmaritime.com/C-S/cargo-surveying-advanced-diploma-expert-in-draught-surveying

This qualification is designed for learners aged pre-16 and above who wish to develop skills and knowledge in creative craft. This course has been designed to be as affordable for families as possible. Please note, this is not a GCSE but is a GCSE Level course which is why it is designed to span 2 years, although we offer complete flexibility on the timeframe that learners can complete within. This qualification is a Level 2 Qualification and is Ofqual approved carrying 15 credits. Other examples of Level 2 qualifications are BTEC Level 2 and the Silver Arts Award. Feedback from our past learners shows that this qualiifcation is widely regarded as level to a grade A*-C/4-9 at GCSE standard when applying for college or work placements. Please also note, that whether this course is recognised as a GCSE equivalent by colleges and further education establishments, can vary according to location, college and even between courses at the same college. If reliant on this qualification for entry onto another course, it is recommended that you establish with the college whether or not this will aid admission, before committing to the course. Click here to download the Level 2 Creative Craft Information Pack.pdf Our Open Day event gives a little more insight into how this course works as well as the course content and payment options: We don't impose any minimum or maximum ages on our learners as we recognise that every learner is an individual and is on their own unique learning journey. We believe, that their adult facilitator is the best person to judge whether a learner is ready for a particular course, but to enable you to make this decision we provide a workbook, free for you to try. Simpy email technologytriumphs@outlook.com to request a free sample session. We are also happy to advise you with this decision so do reach out to us if you would like our guidance on this. As part of your Induction pack, your learner will receive a free apron to use within their course, but aside from this we have designed the courses to utilise as affordable as possible. The following is not an exhaustive list, but does highlight the main costs associated with the course. UNIT SUMMARIES 601/3232/2 Credit Value: 15 Total Qualification Time: 150 hours 1 Be able to use materials, tools and equipment to develop craft techniques  1.1 Assess the properties of available materials for craft item(s) including the visual and tactile qualities 1.2 Select materials, tools, equipment and techniques to support craft ideas and give reasons for choices 1.3 Use appropriate tools and equipment for selected techniques 1.4 Develop craft techniques, making effective use of materials, tools and equipment 1.5 Maintain a safe working environment by ensuring safe use of materials, tools and equipment 1 Understand the market within a chosen craft area  1.1 Explore enterprises within a chosen craft area 1.2 Explain what makes them successful 1.3 Describe the market(s) for chosen craft area 1.4 Identify opportunities in chosen market(s) 1.5 Explain the importance of listening to stakeholders when developing ideas 1.6 Explain the importance of balancing risk against the potential reward of creative ideas 1.7 Identify appropriate financial tools to support creative enterprising ideas 1.8 Identify ways to market a creative product 2 Understand employment opportunities within a chosen craft area  The learner can: 2.1 Explore employment opportunities within a chosen craft area 2.2 Describe the characteristics of an enterprising individual in a chosen craft area 2.3 Identify own strengths and areas for development within a chosen craft area 2.4 Produce an action plan for personal development/career aspirations   1 Be able to develop craft ideas  The learner can: 1.1 Use a range of different sources to develop craft ideas 1.2 Develop visual language to communicate craft ideas 1.3 Use feedback and evaluation of own work to develop craft ideas 1.4 Adapt craft ideas in response to feedback and evaluation of own work 1.5 Select preferred craft idea giving reasons for 1.6 Maintain a safe working environment 1 Be able to create and present final craft item(s)  The learner can: 1.1 Use chosen idea to create a production plan 1.2 Use selected tools, materials, equipment and techniques to produce final craft work 1.3 Display craft work in an appropriate way/setting 1.4 Maintain a safe working environment 2 Know how to evaluate the creative and craft making processes  The learner can: 2.1 Evaluate the creative process 2.2 Review final craft item to identify opportunities for improvement or further development

Awarded by ATHE + Ofqual Regulated + TOTUM Pro Discount Card + Tutor Support + Fully Online + Job Placement Assistance

This qualification is designed for learners aged pre-16 and above who wish to develop skills and knowledge in cookery. This course has been designed to be as affordable for families as possible and it is entirely possible to complete this qualification from a standard domestic kitchen. Please note, this is not a GCSE but is a GCSE Level course which is why it is designed to span 2 years, although we offer complete flexibility on the timeframe that learners can complete within. This qualification is a Level 2 Qualification and is Ofqual approved carrying 15 credits. Other examples of Level 2 qualifications are BTEC Level 2 and the Silver Arts Award. Feedback from our past learners shows that this qualiifcation is widely regarded as level to a grade A*-C/4-9 at GCSE standard when applying for college or work placements. Please also note, that whether this course is recognised as a GCSE equivalent by colleges and further education establishments, can vary according to location, college and even between courses at the same college. If reliant on this qualification for entry onto another course, it is recommended that you establish with the college whether or not this will aid admission, before committing to the course. Click here to download the 2023 Level 2 Cookery Info Pack.pdf The following video explains in detail how the course works and what the course covers: We don't impose any minimum or maximum ages on our learners as we recognise that every learner is an individual and is on their own unique learning journey. We believe, that their adult facilitator is the best person to judge whether a learner is ready for a particular course, but to enable you to make this decision we provide a workbook, free for you to try. Simpy email technologytriumphs@outlook.com to request a free sample session. We are also happy to advise you with this decision so do reach out to us if you would like our guidance on this. As part of your Induction pack, your learner will receive a free apron to use within their course, but aside from this we have designed the courses to utilise as affordable as possible. The following is not an exhaustive list, but does highlight the main costs associated with the course. *** PLEASE CLICK HERE TO BOOK *** UNIT SUMMARIES 601/3232/2/COO Credit Value: 15 Total Qualification Time: 150 hours   1 Be able to use materials, tools and equipment to develop craft techniques  1.1 Assess the properties of available materials for craft item(s) including the visual and tactile qualities  1.2 Select materials, tools, equipment and techniques to support craft ideas and give reasons for choices  1.3 Use appropriate tools and equipment for selected techniques  1.4 Develop craft techniques, making effective use of materials, tools and equipment  1.5 Maintain a safe working environment by ensuring safe use of materials, tools and equipment   1 Understand the market within a chosen craft area  1.1 Explore enterprises within a chosen craft area  1.2 Explain what makes them successful  1.3 Describe the market(s) for chosen craft area  1.4 Identify opportunities in chosen market(s)  1.5 Explain the importance of listening to stakeholders when developing ideas  1.6 Explain the importance of balancing risk against the potential reward of creative ideas  1.7 Identify appropriate financial tools to support creative enterprising ideas  1.8 Identify ways to market a creative product   2 Understand employment opportunities within a chosen craft area  The learner can:  2.1 Explore employment opportunities within a chosen craft area  2.2 Describe the characteristics of an enterprising individual in a chosen craft area  2.3 Identify own strengths and areas for development within a chosen craft area  2.4 Produce an action plan for personal development/career aspirations    1 Be able to develop craft ideas  The learner can:  1.1 Use a range of different sources to develop craft ideas  1.2 Develop visual language to communicate craft ideas  1.3 Use feedback and evaluation of own work to develop craft ideas  1.4 Adapt craft ideas in response to feedback and evaluation of own work  1.5 Select preferred craft idea giving reasons for  1.6 Maintain a safe working environment   1 Be able to create and present final craft item(s)  The learner can:  1.1 Use chosen idea to create a production plan 1.2 Use selected tools, materials, equipment and techniques to produce final craft work  1.3 Display craft work in an appropriate way/setting  1.4 Maintain a safe working environment    2 Know how to evaluate the creative and craft making processes  The learner can:  2.1 Evaluate the creative process  2.2 Review final craft item to identify opportunities for improvement or further development

This qualification is designed for learners aged pre-16 and above who wish to develop skills and knowledge in cake decorating. This course has been designed to be as affordable for families as possible and it is entirely possible to complete this qualification from a standard domestic kitchen. Please note, this is not a GCSE but is a GCSE Level course which is why it is designed to span 2 years, although we offer complete flexibility on the timeframe that learners can complete within. This qualification is a Level 2 Qualification and is Ofqual approved carrying 15 credits. Other examples of Level 2 qualifications are BTEC Level 2 and the Silver Arts Award. Feedback from our past learners shows that this qualiifcation is widely regarded as level to a grade A*-C/4-9 at GCSE standard when applying for college or work placements. Please also note, that whether this course is recognised as a GCSE equivalent by colleges and further education establishments, can vary according to location, college and even between courses at the same college. If reliant on this qualification for entry onto another course, it is recommended that you establish with the college whether or not this will aid admission, before committing to the course. Click here to download the Level 2 Cake Decorating Information Pack.pdf We recently hosted an Open Day live which can be watch on replay here: We don't impose any minimum or maximum ages on our learners as we recognise that every learner is an individual and is on their own unique learning journey. We believe, that their adult facilitator is the best person to judge whether a learner is ready for a particular course, but to enable you to make this decision we provide a workbook, free for you to try. Simpy email technologytriumphs@outlook.com to request a free sample session. We are also happy to advise you with this decision so do reach out to us if you would like our guidance on this. As part of your Induction pack, your learner will receive a free apron to use within their course, but aside from this we have designed the courses to utilise as affordable as possible. The following is not an exhaustive list, but does highlight the main costs associated with the course. UNIT SUMMARIES 601/3232/2/CAK Credit Value: 15 Total Qualification Time: 150 hours   1 Be able to use materials, tools and equipment to develop craft techniques  1.1 Assess the properties of available materials for craft item(s) including the visual and tactile qualities  1.2 Select materials, tools, equipment and techniques to support craft ideas and give reasons for choices  1.3 Use appropriate tools and equipment for selected techniques  1.4 Develop craft techniques, making effective use of materials, tools and equipment  1.5 Maintain a safe working environment by ensuring safe use of materials, tools and equipment   1 Understand the market within a chosen craft area  1.1 Explore enterprises within a chosen craft area  1.2 Explain what makes them successful  1.3 Describe the market(s) for chosen craft area  1.4 Identify opportunities in chosen market(s)  1.5 Explain the importance of listening to stakeholders when developing ideas  1.6 Explain the importance of balancing risk against the potential reward of creative ideas  1.7 Identify appropriate financial tools to support creative enterprising ideas  1.8 Identify ways to market a creative product   2 Understand employment opportunities within a chosen craft area  The learner can:  2.1 Explore employment opportunities within a chosen craft area  2.2 Describe the characteristics of an enterprising individual in a chosen craft area  2.3 Identify own strengths and areas for development within a chosen craft area  2.4 Produce an action plan for personal development/career aspirations    1 Be able to develop craft ideas  The learner can:  1.1 Use a range of different sources to develop craft ideas  1.2 Develop visual language to communicate craft ideas  1.3 Use feedback and evaluation of own work to develop craft ideas  1.4 Adapt craft ideas in response to feedback and evaluation of own work  1.5 Select preferred craft idea giving reasons for  1.6 Maintain a safe working environment   1 Be able to create and present final craft item(s)  The learner can:  1.1 Use chosen idea to create a production plan 1.2 Use selected tools, materials, equipment and techniques to produce final craft work  1.3 Display craft work in an appropriate way/setting  1.4 Maintain a safe working environment    2 Know how to evaluate the creative and craft making processes  The learner can:  2.1 Evaluate the creative process  2.2 Review final craft item to identify opportunities for improvement or further development

This qualification is designed for learners aged pre-16 and above who wish to develop skills and knowledge in textile craft. This course has been designed to be as affordable for families as possible but does rely on the use of a sewing machine. Please note, this is not a GCSE but is a GCSE Level course which is why it is designed to span 2 years, although we offer complete flexibility on the timeframe that learners can complete within. This qualification is a Level 2 Qualification and is Ofqual approved carrying 15 credits. Other examples of Level 2 qualifications are BTEC Level 2 and the Silver Arts Award. Feedback from our past learners shows that this qualiifcation is widely regarded as level to a grade A*-C/4-9 at GCSE standard when applying for college or work placements. Please also note, that whether this course is recognised as a GCSE equivalent by colleges and further education establishments, can vary according to location, college and even between courses at the same college. If reliant on this qualification for entry onto another course, it is recommended that you establish with the college whether or not this will aid admission, before committing to the course. Click here to download the Level 2 Textiles Information Pack.pdf Our Open day event gives a little more insight into how the course works and the content covered: We don't impose any minimum or maximum ages on our learners as we recognise that every learner is an individual and is on their own unique learning journey. We believe, that their adult facilitator is the best person to judge whether a learner is ready for a particular course, but to enable you to make this decision we provide a workbook, free for you to try. Simpy email technologytriumphs@outlook.com to request a free sample session. We are also happy to advise you with this decision so do reach out to us if you would like our guidance on this. As part of your Induction pack, your learner will receive a free apron to use within their course, but aside from this we have designed the courses to utilise as affordable as possible. The following is not an exhaustive list, but does highlight the main costs associated with the course. For further information or to ask any questions please feel free to reach out to us, in the assurance that you are speaking to another fellow home edder.Support can be found in our dedicated Facebook group where you will also have access to a free sample session within the file sectionLevel 2 Textiles Group *** PLEASE CLICK HERE TO BOOK *** UNIT SUMMARIES 601/3232/2/TEX Credit Value: 15 Total Qualification Time: 150 hours   1 Be able to use materials, tools and equipment to develop craft techniques  1.1 Assess the properties of available materials for craft item(s) including the visual and tactile qualities  1.2 Select materials, tools, equipment and techniques to support craft ideas and give reasons for choices  1.3 Use appropriate tools and equipment for selected techniques  1.4 Develop craft techniques, making effective use of materials, tools and equipment  1.5 Maintain a safe working environment by ensuring safe use of materials, tools and equipment   1 Understand the market within a chosen craft area  1.1 Explore enterprises within a chosen craft area  1.2 Explain what makes them successful  1.3 Describe the market(s) for chosen craft area  1.4 Identify opportunities in chosen market(s)  1.5 Explain the importance of listening to stakeholders when developing ideas  1.6 Explain the importance of balancing risk against the potential reward of creative ideas  1.7 Identify appropriate financial tools to support creative enterprising ideas  1.8 Identify ways to market a creative product   2 Understand employment opportunities within a chosen craft area  The learner can:  2.1 Explore employment opportunities within a chosen craft area  2.2 Describe the characteristics of an enterprising individual in a chosen craft area  2.3 Identify own strengths and areas for development within a chosen craft area  2.4 Produce an action plan for personal development/career aspirations    1 Be able to develop craft ideas  The learner can:  1.1 Use a range of different sources to develop craft ideas  1.2 Develop visual language to communicate craft ideas  1.3 Use feedback and evaluation of own work to develop craft ideas  1.4 Adapt craft ideas in response to feedback and evaluation of own work  1.5 Select preferred craft idea giving reasons for  1.6 Maintain a safe working environment   1 Be able to create and present final craft item(s)  The learner can:  1.1 Use chosen idea to create a production plan 1.2 Use selected tools, materials, equipment and techniques to produce final craft work  1.3 Display craft work in an appropriate way/setting  1.4 Maintain a safe working environment    2 Know how to evaluate the creative and craft making processes  The learner can:  2.1 Evaluate the creative process  2.2 Review final craft item to identify opportunities for improvement or further development

This session is for those who find themselves teaching even though they have not gone through teacher training. It is designed to give you the basic tools you need to begin delivering to ensure that learning takes place.

The NASM Certified Nutrition Coach (CNC) is your education solution for guiding clients toward optimal nutrition choices for health- and wellness-related outcomes. The course arms you with evidence-backed nutrition science that has been peer-reviewed by multiple experts in the industry. It also teaches you how to use behavior change and coaching strategies with your clients to develop long-lasting weight loss and healthful nutrition habits.