Cademy logoCademy Marketplace
  • Professional Development
  • Medicine & Nursing
  • Arts & Crafts
  • Health & Wellbeing
  • Personal Development

118 Educators providing Courses delivered On Demand

ChemicalOn Demand
Marshall Assessment

marshall assessment

Birmingham

End point assessments are the final tests given to an apprentice during their apprenticeship. The goal of this activity is to offer an impartial, objective review of individual skills, knowledge, and behaviours. Although the activities are different for each apprenticeship, end-point assessments follow the same general structures. The end-point assessment is performed after a minimum of 12 months after the start of the apprenticeship. It must be successfully completed before the issuance of an apprenticeship completion certificate. Every training provider delivering on Apprenticeship standards must have an agreement with an End Point Assessment Organisation (EPAO). Assessment Organisations must be registered on the Government approved register (RoEPAO). If you have apprentices in the life science, chemical science, physical science or in the science education sector, our fair and straight-forward EPA process provides a cost effective, quality-assured assessment solution for your business. Marshall Assessment has over 30 years’ experience of work based learning and assessment. We make the unfamiliar structures of end-point assessment easily navigable with comprehensive customer support and assessment resources. We have a broad range of occupational competence that spans most of the UK science sector. Our industry-competent assessors focus on precise communication, clear expectations, and rapid reporting of assessment decisions. Assessment activities depend on the apprenticeship under evaluation. Individuals might participate in professional discussions, complete skill-based challenges, or perform in situational judgement tests. Portfolios and practical observations are sometimes part of the process, as are presentations, showcases, and interviews. Each assessment activity works to evidence the knowledge, skills and behaviours that each learner has developed during their apprenticeship. This complete and careful evaluation of their skills, knowledge, and behaviours is an impartial, yet rigorous process that tests the candidates core ability to perform their job role effectively and safely. The unique benefit that the end-point assessment brings is its holistic design. People retain knowledge and learn new skills in unique ways. Instead of trying to fit each candidate into the same profile, this process looks at the competency of the individual from all facets. Assessment Plans Achieve Crucial Outcomes. Assessment plans are delivered by the training provider with guidance from the EPAO. This provides structure to the EPA and signposts our assessors to maximise our assessment opportunities. End point assessments remove managers being the sole decision-makers on the competencies of a candidate. Although, that change can be challenging for some, working with our team ensures that your assessment plan achieves the best possible outcome. Our assessment team are flexible and will rapidly understand the requirements of your business. We will partner with you to give your apprentices the best possible chance to shine and demonstrate their competencies. This partnership begins with initial assessment and progresses to EPA and beyond, as we will stay in touch with you regarding your apprentice’s progression. Now is the time to link up with your EPAO. Our future depends on the expertise that your apprentices demonstrate in the science sector. Together we are responsible for building a brighter, safer world through a highly trained and competent scientific workforce. Use the experience our team provides to help your organisation and the science sector to bounce forward.

Message
Alchemilla Apothecary

alchemilla apothecary

Saint Mawgan

Alchemilla is a modern herbal wellness clinic located on the beautiful Cornish coast. I offer high-quality products and services which celebrate plants and herbal traditions from around the world and across the ages. One of the main aims of the apothecary is to revive the role of the traditional herbalist, skilled in the preparation and dispensing of tried and trusted remedies. Just as we expect our food to be grown with love and care, so should we expect the same from our medicines and those who create them. “Where do your medicines come from?” I stock a range herbal tinctures, syrups and teas, all have been handpicked for their high-quality ingredients and environmentally friendly ethos. Products manufactured here in the apothecary carry the HerbMark logo which shows they have been created by a practitioner trained in the manufacture of herbal medicines. You can read more about HerbMark and what it means here, and visit the herb shop here. Alchemilla was created with the aim of protecting and sharing herbal knowledge so that it can be passed onto future generations. I’m a writer at heart, and thoroughly enjoy curating content to help encourage more people to rediscover the joy of herbs. I write widely about home medicine making skills in my newsletter, and have also written a number of articles which have been published in a variety of journals and magazines. I also offer online and in person herbal consultations. Click here to read more about my services or feel fee to send an email to sarah@alchemilla.co to book a “hello” call. WHAT QUALIFIES ME TO HELP YOU? I spent five years studying herbal medicine and naturopathic practice at the College of Naturopathic Medicine at Regent’s College London. During this time I researched and wrote about a wide range of topics which prepared me well for my service as an herbalist. This included: Phytochemistry (the chemical structure of plants and what effects these substances have on the human body) Ethnobotany – the scientific study of the traditional knowledge and customs of a people concerning plants and their medical, religious, and other uses Wild-crafting and gardening, growing plants from seed and learning to identify plants in the wild Formulation and preparation of botanical medicines. The intricate art of prescribing and preparing herbal medicines for use Iridology, Chinese tongue diagnosis, naturopathic cleansing, and holistic nutrition In addition to my studies, I also completed 500+ hours of clinical practice working in a variety of diverse herbal clinics and dispensaries across the UK. Every year, as part of my practice and commitment to my profession, I undergo additional professional training to ensure I’m always up to speed with any new developments in the herbal world. You can learn more about the standards of proficiency required to become a registered practitioner on the EHPTA (European Herbal & Traditional Medicine Practitioners Association) website. Find out more about the training required to become a practising herbalist here. “Alchemy – The act of changing a substance of little value into gold, or the elixir of life”

Message
Compete High

compete high

London

Compete High: Your #1 Destination for Skill Development. Explore diverse range of courses to boost your expertise, outshine your competition, and fly high in your career.

Message
NextGen Learning

nextgen learning

London, United Kingdom

NextGen Learning offers futuristic learning tailored for emerging leaders. Dedicated to empowering learners, this platform boasts a vast array of courses, crafted by industry professionals, for both personal and professional growth. Dive into a transformative journey, unlocking unparalleled potential, and equipping yourself with qualification & skills designed to lead tomorrow's world.

Message
westlink tiling courses

westlink tiling courses

Are you looking to retrain in your career or take up a new hobby? Courses.ie is a national database of training courses across Ireland. We list courses of all types from colleges and course providers around Ireland, from evening classes, postgraduate courses, 3rd level courses, corporate training courses, to distance learning courses. We list thousands of courses and programmes as well as publish weekly informative articles about every aspect of education in our articles library. Our goal is to help individuals and companies find relevant courses or providers for private and professional development training in Ireland. We firmly believe in the value of education and continuing personal and professional development. Through Courses.ie and the other websites in our network, we not only help course providers to promote their courses but also those seeking information about courses to easily find the right options for them. For every course we list, we present relevant information such as content, prices, start dates. Users are able to request more information from the course organiser as well as apply for the courses directly online. We list everything from Taekwon-Do classes to Postgraduate Courses in Computing.

Message
IOMH - Institute of Mental Health

iomh - institute of mental health

London

The IOMH - Institute of Mental Health [https://iomh.co.uk/]is dedicated to empowering individuals to unlock their full potential and thrive in multiple areas of life. Whether you're seeking personal growth, professional development, or support in overcoming life's challenges, we have the resources and expertise to guide you on your transformative journey. Our Vision At the IOMH (Institute of Mental Health), we envision a world where every person is inspired to embrace change, overcome obstacles, motivate others, and find hope in the face of adversity. We believe that through education and support, individuals can tap into their inner strength and create meaningful transformations in all aspects of life. Our Mission Our mission is to break barriers and ignite the spark of possibility within you. We are committed to offering a diverse range of courses and programs that encompass various niches, allowing you to explore and excel in multiple areas of interest. Our skillfully crafted content, designed by specialists, provides you with the knowledge and skills you need to become a well-rounded and empowered individual. WHAT WE OFFER * Expert-Curated Courses: Our courses are developed by industry-leading experts. * Fully Accredited Courses and Study Materials: Ensure quality and credibility. * Business Team Training: Tailor-made programs for corporate teams. * Affordable Subscriptions: Flexible payment options to suit your budget. * Accredited Certifications: Validate your skills and expertise. * New Courses Monthly: Stay updated with the latest trends. * Flexible Learning: Learn at your own pace and convenience. * 24/7 Support: Dedicated assistance whenever you need it. OUR VISION AT THE IOMH (INSTITUTE OF MENTAL HEALTH), WE ENVISION A WORLD WHERE EVERY PERSON IS INSPIRED TO EMBRACE CHANGE, OVERCOME OBSTACLES, MOTIVATE OTHERS, AND FIND HOPE IN THE FACE OF ADVERSITY. WE BELIEVE THAT THROUGH EDUCATION AND SUPPORT, INDIVIDUALS CAN TAP INTO THEIR INNER STRENGTH AND CREATE MEANINGFUL TRANSFORMATIONS IN ALL ASPECTS OF LIFE. OUR VISION AT THE IOMH (INSTITUTE OF MENTAL HEALTH), WE ENVISION A WORLD WHERE EVERY PERSON IS INSPIRED TO EMBRACE CHANGE, OVERCOME OBSTACLES, MOTIVATE OTHERS, AND FIND HOPE IN THE FACE OF ADVERSITY. WE BELIEVE THAT THROUGH EDUCATION AND SUPPORT, INDIVIDUALS CAN TAP INTO THEIR INNER STRENGTH AND CREATE MEANINGFUL TRANSFORMATIONS IN ALL ASPECTS OF LIFE.

Message
Compliance Central

compliance central

Luton

Compliance Central has received a lot of positive feedback from students all across the world. On our platform, we're committed to giving students the knowledge they need through online courses and giving them the chance to earn certifications that are renowned around the world. Get ready to start your own journey with us!

Message
Moderntronics

moderntronics

Harrow,

In these terms and conditions (“Conditions”) the following expressions shall have the following meanings: “Business Day” means any day other than Saturday, Sunday or a public holiday. “Business Hours” means the hours detailed in Condition 32 below. “Contact Hours” means Monday to Friday (inclusive) from 07:00 hours to 17:00 hours but excluding bank holidays. “Contract” means any contract between MT and the Customer for the supply of Hardware and/or Software (with the associated Licence) and/or services which is subject to these Conditions. “Customer” means any person, firm or company who enters into a Contract with MT to which these Conditions apply. “Force Majeure” means any event outside the reasonable control of either Party affecting its ability to perform any of its obligations (other than as to payment) under these Conditions. “Goods” means all or any tangible or intangible goods or intellectual property including but not limited to Hardware and Software which are provided to a Customer in accordance with these Conditions. “Hardware” means any hardware provided by MT to the Customer. “MT” means MODERNTRONICS Ltd. or its servants and agents as the case may be. “Insolvency Event” means any one of the following in relation to the Customer: (i) a notice being issued to propose a resolution for winding up or dissolution, or such a resolution being passed; (ii) a petition for a winding up or an administration or bankruptcy order being presented, or such an order made; (iii)any steps being taken with a view to a voluntary arrangement or other assignment, composition or arrangement with all or any creditors or any moratorium, readjustment, rescheduling, forgiveness or deferral of all or any indebtedness; (iv) suspension of payments to all or any creditors and/or ceasing business; (v)an encumbrancer taking possession of all or any assets; (vi) an administrator or receiver being appointed over the Customer or all or any of its assets; (vii)any action anywhere similar or analogous to any of the foregoing; or MT reasonably believing that any of the foregoing is imminent. “Licence” has the meaning attributed to it in Condition 23 below. “Minimum Term” means the term set out in Condition 17 below. “Party” means MT or the Customer and “Parties” means both of them. “Response Time” means two Working Hours from an initial call to the hotline under Condition 26 or 28 below. “Seminar” means any seminar provided by MT. “Service Operator” has the meaning given to that term in Condition 28 below. “Site” means https://www.moderntronics.com and all subdomains including (but without limitation) “Software” means software or software updates or upgrades provided by MT and licensed to the Customer under Condition 23 below. “Training Sessions” means any training session provided by MT. “Working Hours” means the hours between 9:00 to 17:00 on any Business Day 2. Interpretation In these Conditions, the following rules apply: A person includes a natural person, corporate or unincorporated body (whether or not having separate legal personality). A reference to a Party includes its personal representatives, successors or permitted assigns. A reference to a statute or statutory provision is a reference to such statute or provision as amended or re-enacted. A reference to a statute or statutory provision includes any subordinate legislation made under that statute or statutory provision, as amended or re-enacted. Any phrase introduced by the terms including, include, in particular or any similar expression shall be construed as illustrative and shall not limit the sense of the words preceding those terms. A reference to writing or written includes faxes and e-mails. 3. General Information These Conditions apply when MT: sells and delivers Hardware; sells and delivers Licences; sells and delivers Software; or provides repairs or any other services to the Customer. They will also apply to other business transactions unless MT agrees that alternative special conditions apply. These Conditions apply to the exclusion of any other conditions that may be proposed by a Customer or implied by law (insofar as such exclusion is lawful). Part II Specific Provisions for the Use of the Online Shop Customers purchasing Goods from the Site, must read all Parts of these Conditions, which apply to them in full. 4. Consumers The Goods and services provided by MT are designed only for sale to and use by businesses in the course of their business activities. MT does not knowingly sell to any person dealing as a consumer or supply anything for personal use. 5. Customer’s Status By placing an order on the Site, the Customer warrants that he or she is: legally capable of entering into binding contracts and, where the Customer is an individual, that he or she is at least 18 years old; and is dealing in a business capacity and purchasing Goods and/or services for the purpose of his business and not for personal use. Part III General Conditions for the Provision of Goods and Services 6. Formation of Contract Quotations provided by MT to the Customer are not binding on MT. The Customer’s order constitutes an offer to MT to buy the Goods or services. All orders are subject to acceptance by MT. The offer will be deemed accepted, and a Contract formed, when MT sends the Customer confirmation that the Goods have been dispatched (“Dispatch Confirmation”) or, in the absence of a Dispatch Confirmation, when the Goods are delivered. The Contract will only relate to those Goods whose dispatch is confirmed to the Customer by a Dispatch Confirmation or if no Dispatch Confirmation is sent, those Goods which are actually dispatched. MT is not obliged to supply any Goods which may have been part of the Customer’s order until the dispatch of such Goods has been confirmed in a separate Dispatch Confirmation. Subject to Condition 17 below, an order for services will be deemed to have been accepted, and a Contract formed, when MT sends the Customer confirmation that the services ordered will be provided (“Service Confirmation”) or, in the absence of a Service Confirmation, when the services begin to be provided. Oral representations will only be binding upon MT if they are expressly confirmed in writing by MT to the Customer. 7. Price Unless MT expressly specifies prices to the Customer, MT’s current list of prices applicable at the time of the acknowledgement of order will apply. Unless otherwise agreed in writing, all prices are exclusive of value added tax, postage, freight, insurance, forwarding fees, installation and commissioning, travelling expenses and subsistence, which will be added as appropriate. MT will charge overtime for work outside of their normal Business Hours at up to 150% of the hourly rate from time to time applicable during Business Hours. Subject to Condition 16 below, prices are liable to change at any time, but changes will not affect orders in respect of which MT has already sent the Customer a Dispatch Confirmation or a Service Confirmation as the case may be. The Site contains a large number of products and it is always possible that, despite MT’s efforts, some of the products listed may be incorrectly priced. MT will normally verify prices as part of dispatch procedures so that, where a product’s correct price is less than our stated price, MT will charge the lower amount when dispatching the product to you. If a product’s correct price is higher than the price stated on our site, MT will normally, at our discretion, either contact you for instructions before dispatching the product, or reject your order and notify you of such rejection. MT is under no obligation to provide any Goods or services to the Customer at an incorrect (lower) price, even after MT has sent a Dispatch Confirmation or a Service Confirmation in relation to those Goods or services if such incorrect price could reasonably have been expected to be recognised by the Customer as an error. 8. Delivery and Availability The Customer’s order for Goods will be fulfilled by the delivery date in the Dispatch Confirmation or, if no delivery date is specified, then within 30 days of the date the Customer made his order (where such an order leads to a Contract). The period for delivery or performance of the Contract will normally commence on MT’s acknowledgement of the order. However, if the Customer is required to do anything before MT can effect delivery, MT will, as soon as practicable, notify the Customer accordingly. The time within which MT must deliver any Goods will run from the date on which MT receives notice from the Customer that it has duly complied with such notification from MT. Unless otherwise agreed in writing, any periods mentioned in the acknowledgement of order for services and Software development are based on a preliminary estimate of the required workload and therefore are approximate only. Time of delivery and performance is not of the essence. If MT fails to meet any delivery or performance dates set out in the acknowledgement of order and is solely responsible for such failure, the Customer may terminate the Contract but only after MT has been given an opportunity to rectify the situation and subsequently fails to meet the revised set of delivery or performance dates provided by MT to the Customer in writing. Unless MT has been deliberately or grossly negligent, all further claims of the Customer on the basis of the delay in performance are excluded. If MT cannot deliver or perform its obligations under the Contract due to Force Majeure or a failure of the Customer to cooperate or any other act, default or omission of the Customer, then MT will be entitled to perform its obligations under the Contract once the issue has been resolved, provided the issue occurred while MT was still allowed to deliver or perform and MT shall have no liability whatsoever for any delay or its failure to perform its obligations. 9. Agreed Performance Unless specified otherwise in writing, the agreed performance in respect of any repairs provided by MT, at the Customer’s request will be to adjust the relevant unit(s) to MT’s applicable standard specifications for that unit. Where the relevant unit(s) cannot be repaired to MT’s applicable standard specification due to the Customer limiting the repairs required or the time and money to be invested MT may exceed the Customer’s request if MT considers, at its sole discretion, that such additional repairs are reasonable and will ensure the proper functionality of the unit in question. The agreed performance levels for MT’s maintenance and care services are as set out in Conditions 26 and 28 below; for all other services the agreed performance levels will be as set out in the acknowledgement of order. 10. Refunds Where the Customer returns Goods (at the Customer’s cost) because he or she claims that the Goods are defective, MT will examine the returned Goods and will notify the Customer of its findings within a reasonable period of time. If MT (in its sole discretion) deems that the Goods are defective, MT may at its option repair, replace or provide a refund in respect of such defective Goods. MT will process any repair, replacement or refund as soon as practicable and, in the case of any refund, within 30 days of the day MT confirmed to the Customer that the Customer was entitled to the same. Such refunds will be made in full, including a refund of any delivery charges for sending the item to the Customer. 11. Import Duty If the Customer orders Goods for delivery outside the UK, they may be subject to import duties and taxes which are levied when the delivery reaches the specified destination. The Customer will be responsible for payment of any such import duties and taxes. Please note that MT has no control over these charges and cannot predict their amount. Customers should contact their local customs office for further information before placing an order. Customers must comply with all applicable laws and regulations of the country for which the Goods are destined. The Customer will indemnify and keep indemnified MT in respect of all costs, proceedings, losses and liabilities resulting from any breach by the Customer of any such laws. 12. Retention of Title to Property The Goods will be at the Customer’s risk from the time of delivery. Property in and title to all Goods will remain with MT until MT has received payment for the full price of all the Goods (and/or all other goods and/or services supplied by MT to the Customer under any other contract whatsoever).. The Customer may sell or use Goods in which title is retained during the course of their normal business, but may not give such Goods by way of pledge or pledge these Goods as security. Until the property in and title to the Goods passes to the Customer: the Customer shall keep the Goods properly stored, protected and insured and separate from all or any other goods whether belonging to MT, the Customer or any third party; MT shall be entitled at any time forthwith to revoke the Customer’s power to deal with the Goods; and such power shall automatically cease if an Insolvency Event shall occur in respect of the Customer; and the Customer shall not make any modification to the Goods, the Software or their packaging or alter, remove or tamper with any marks, numbers or other means of identification used on or in relation to the Goods. Upon termination of the Customer’s power to deal with the Goods, the Customer shall place the Goods at the disposal of MT and MT are hereby irrevocably authorised without the need for consent of any third party but using only such force as may be necessary, to enter upon any premises of the Customer or any third party for the purpose of removing the Goods. If third parties claim title to Goods with retained title, the Customer will inform MT without delay, will notify the person making the claim of MT’s title and will support MT in enforcing its rights, including taking all the necessary steps required to preserve MT’s rights, including commencing litigation at the Customer’s own expense. If the Customer breaches the Contract, e. g. by delaying payment, the Customer will be obliged to return the Goods with retained title if requested by MT, in return for which MT will not terminate the Contract. 13. Payment Where services, maintenance or care are provided on an ongoing basis, MT will invoice the Customer for these at the beginning of the billing period or as soon as reasonably practicable thereafter. The Customer will pay MT’s invoices in full within 30 days from the date of the relevant invoice. Depending on the scope of an order, payments for such services, maintenance or care are due either upon placement of the order by the Customer or upon partial delivery of the same of between 40 to 50% of their respective order value. BACS or cheque are the only methods of payment accepted. Invoices for Seminars and Training Sessions will be issued at the beginning of the respective session and payment is due immediately and without deduction. 14. Delay of Payment Where a Customer fails to pay an invoice by the due date, MT will be entitled to charge the Customer interest on all monies outstanding from the due date until the actual date of payment (both before and after judgment) at a rate of 8% above the base rate of the Bank of England calculated on a daily basis. 15. Setting-Off and Refusal of Payment The Customer cannot exercise any right of set-off in respect of amounts owed to or by MT. 16. Change of Pricing by MT for Ongoing Maintenance or Care MT may increase its prices for maintenance and services by giving the Customer written notice 2 months prior to the end of the Minimum Term. The Customer has 4 weeks from the date of receipt of the written notice from MT to object to the change. Where the Customer so objects, the Customer will be entitled to give notice to MT to terminate the Contract as of the date of the proposed price increase. 17. Automatic Extension of Contract Where services, maintenance or care are performed on an ongoing basis the Contract will come into effect upon acceptance by MT of the first order from the Customer for Software maintenance. The Contract will initially run until the date specified at “Minimum Service Duration” as set out in the “MT Service Product List” or until the expiry date where an expiry date is stipulated in the Contract (“Minimum Term”). Subject to one of the Parties serving written notice of termination on the other at least three months prior to the expiry of the Minimum Term, the Contract will be extended automatically. In the case of Software Licences supplied without a time limit, the Contract will extend until December 31st of the current year. The subsequent extension periods will begin on January 1st and end on December 31st of the respective year. In the case of Software Licences supplied with limited validity (e.g. a licence for 1-year) the extension is based on the terms and conditions set out in the description of the respective licence (e.g. extension by one further year). Unless otherwise agreed in writing, any extension to a Contract will be on the basis of MT’s current price list as at the date of such extension. 18. Delivery Obligations and Shipping The conditions for EXW (ex works) (MT’s premises or such other place referred to in the relevant order) as set out in the Incoterms 2010 apply to delivery of any Goods. Claims for any transport damages and any replacement of damaged Goods, remain with the Customer who is responsible for adhering to the mode and period for the filing of any claims with carriers, shippers and insurers. 19. Scope of Warranty (Material Deficiencies and Deficiencies in Title) MT warrants that the Hardware is free from defects in workmanship and material as at the time of transfer of risk; and warrants that the Software does not contain any flaws which void or substantially reduce its value or suitability for the usual or contracted purpose. Where MT is not the author of the Software, MT does not warrant that such Software will run without interruptions or errors, nor that MT will be capable of resolving all Software errors, nor that the Customer will be capable of achieving all of the functions included in the Software in all of the combinations chosen by the Customer, nor that these will meet the Customer’s requirements. MT will only warrant the quality and/or durability of Goods if it has expressly agreed in writing with the Customer that it will do so. The warranty period is 1 year. Where MT is the author of the Software such Software is subject to MT’s standard warranty. 20. Obligation to Inspect and Serve Notice of Defects The Customer must inspect the Goods upon delivery or repair and must notify MT in writing of any failure by MT to meet the specification within 7 days of delivery or repair or (where the failure was not apparent on reasonable inspection) within a reasonable time being no more than 1 month after discovery of the failure. Where the Customer fails to provide such notice MT will have no liability under its warranty. 21. Liability Subject only to Condition 21 d), MT shall not be liable to the Customer in contract, tort (including without limitation negligence) and/or breach of statutory duty for any loss or damage which the Customer may suffer by reason of any act, omission, neglect or default (including negligence) in the performance of the Contract by MT, its servants or agents, in a sum which is greater than GBP 200,000 per incident or series of connected incidents. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect loss of any kind resulting from these Conditions, its performance or any breach of its terms. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect economic loss of any kind including (but without limitation) loss of business opportunity, reputation, goodwill resulting from these Conditions, its performance or any breach of its conditions. Notwithstanding any other provision herein, nothing in these Conditions shall operate so as to limit or exclude MT’s non-excludable liability in respect of death or personal injury caused by the negligence of MT to exclude the application of Section 12 of the Sale of Goods Act 1979 and to exclude liability for fraudulent misrepresentation. MT’s liability for loss of data is limited to the effort required to restore the data from proper backups provided by the Customer. 22. Third Party Rights If any third party claims or takes action against the Customer, because Goods delivered by MT, or their use in accordance with the instructions provided by MT, purportedly violate their commercial rights or proprietary rights, then the Customer will inform MT of the same. MT agrees that they will assist the Customer in defending such claims. Where the claim is made to the Customer within 12 months of the date of delivery, MT will indemnify the Customer against claims provided that the Customer: appoints MT to defend the claims or to settle the dispute, and promptly notifies MT of any such claim, keeps the Customer informed of all information received and provides such reasonable assistance to MT as it shall reasonably require, does not defend the action itself without coordinating such defence with MT, and does not at any time admit liability or otherwise settle or compromise or attempt to settle or compromise the said claim or action except upon the express instruction of MT, the alleged breach of rights is not based on alteration of the delivered item used by the Customer, and does not use the item delivered by MT in conjunction with other items and/or in a fashion that breaches any such rights, in a situation where the use of the item as delivered by MT would not have breached the rights of the person who has filed the claim. MT may at any time and at its own expense acquire on behalf of the Customer the right to continue to use the Goods, to replace the Goods or alter them in such a fashion that the rights of others are no longer breached. If this is not possible, the Customer shall return or destroy the Goods if required to do so by MT who will reimburse the purchasing price for the Goods less depreciation. If the Customer refuses to do so, MT will no longer defend the claim or provide the Customer with any further support. The Customer has no further rights in case of disputes over proprietary rights with third parties and MT shall have no liability therefore unless MT could be blamed for acting deliberately or with gross negligence. Part IV Special Conditions for Delivery of Software 23. Conditions of Use for Delivered Software In the case of delivery of Software to the Customer, MT hereby grants the Customer a simple, non exclusive and non-transferable, licence to use the Software (“Licence”) . The validity of the Licence is not time limited, unless otherwise specified to the contrary in the terms and conditions of the Licence. MT, grants the Customer the use of such Software in the form of the object code and the user documentation with the use being restricted to one electronic data processing system at any one time and only for the tasks for which it is intended. Unless permitted by law, the Customer will not decompile the Software or perform reverse engineering. The Customer may duplicate the Software but only to the extent that this is required for the permitted use, and in order to allow it to perform data backup. Upon delivery of any Software, including updates and upgrades, the Customer will immediately produce a backup copy. MT may terminate the Licence granted to the Customer pursuant to this Condition 23 with immediate effect if the Customer is in breach of the conditions for the use of the Software for a period of 30 days from the date of a written notice of such a breach from MT or any third party. On termination of this Contract howsoever arising, the Customer will return to MT within 30 days all Software together with any related materials owned and licensed by MT and shall delete all copies and partial copies of the Software however stored within 7 days of service of the notice. Proof of such deletion must be provided to MT without delay. On receipt of prior written consent from MT, the Customer may retain a copy of the Software for the purposes of archiving. 24. Delivery of Software MT will only install the Software if this has been expressly agreed in writing between the Customer and MT. MT is able to provide telephone consultancy and support concerning questions relating to the application of the respective Software products as well as the solution of problems that may occur as provided for in Condition 26 below. 25. Prerequisites for Running the Delivered Software The proper running of Software systems supplied will only be guaranteed if the Hardware and operating system components used correspond to the reference systems of the respective manufacturer(s), as well as having been approved and certified. Unless otherwise agreed in the Contract, the Customer shall ensure that the provisions in this Condition 25 are complied with. Part VMaintenance and Care Application Software 26. Scope of Performance of MT Services for Application Software For the Software products, unless otherwise expressly agreed in writing, MT will provide the following services, denoted by Service Level “SW-Service STANDARD” and Service Level “SW-Service E-STANDARD”: Right to use Software and documentation updates: MT grants the Customer a non-transferable, non-exclusive Licence to use the Software and any documentation or updates. The right of use is not limited in validity, unless otherwise specified in the terms and conditions of the Licence. Software and documentation updates: MT will supply the Customer with the current version of the Software as specified in the Contract. This will be done as specified by the manufacturer of the Software. The documentation will be supplied in the form determined by the manufacturer of the Software. The installation of Software updates will be performed by suitably qualified personnel of the Customer. Alternatively for an additional charge, MT may install the Software updates on behalf of the Customer. Where the Customer has adapted the Software, the Customer will be liable for the additional cost of performing the same adaptation to the new version of the Software or alternatively the Customer may perform the necessary adaptation himself. Hotline (Service Level “SW-Service STANDARD” only) MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. E-mail Hotline (Service Level “SW-Service E-STANDARD” only) MT is able to provide e-mail consultancy and support in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours Wherever possible, qualified consultancy will be provided by MT within the Response Time. MT Hotline: E-mail: hotline@MT.com Internet: http://www.MT.com/customersupport Software error messages Where Software problems occur which MT is unable, for whatever reason, to resolve, the Customer may send a written error message to MT. The purpose of such an error message is to identify the error in the Software and enable the manufacturer to resolve the error. MT shall liaise with the manufacturer(s) of the Software products to resolve any Software errors as promptly as possible. Restoration of any data, regardless of the cause of the data loss, is not the responsibility of MT. 27. Obligation of the Customer to Co-operate Pre-conditions for the provision of the services by MT to the Customer are that the Customer has legally acquired the Software and holds a corresponding Licence to use it. In addition, the Software must be in the same condition that it was in when it was delivered. The services exclusively relate to the current release and delivered version of the Software. If earlier Software versions are used, a one-time update service which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Services will not be performed for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). If the operating system for the Hardware is not included in the Contract, the Customer must update the operating system to the most recent version (e. g. by purchasing updates) if this is required in order to use the new versions of the application Software. Hardware and Operating Systems 28. Scope of Performance of MT Maintenance and Care Services for Hardware and Operating System For Hardware products and the operating system, unless otherwise agreed in writing, MT will provide the following services, denoted by Service Level “HW-Service SPECIAL”: The scope of performance is briefly set out in the “Special Description” for each product listed in the attached “MT Service Product List”. The exact scope of performance will be determined in accordance with the attached description of performance issued by the respective MT service operator (“Service Operator” including but not limited to Hewlett-Packard, Fujitsu Siemens and Silicon Graphics). The following shall also apply: Hotline MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Hardware products and operating system, as well as the resolution, (in so far as it is reasonably practicable to do so) of any problems which may occur. This service will be performed by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. Where queries arise outside of the Contact Hours, the Customer should address such queries directly to MT’s Service Operator Response time for Hardware failures MT will use reasonable endeavours to solve a query within the Response Time. The Response Time shall be deemed to have been initiated either as soon as the customer service personnel arrives on the relevant site, or as soon as remote diagnosis is started, where either is required to resolve the problem. The appropriate Response Time will be determined in accordance with the attached description of performance issued by the respective MT Service Operator. 29. Services Not Included Unless otherwise agreed in writing, the following services will not be provided by MT to the Customer: a) Repair/re-acquisition of devices that have been damaged as a result of: incidents of war of any type civil wars, nuclear energy, deliberate action of the Customer (not of his subcontractors) b) Repair/re-acquisition that is required because of repair work or alterations of devices carried out by the Customer or any third party without the prior written consent of MT. c) Work required due to interface problems between MT’s devices and those of other manufacturers and suppliers. d) Customer service which is required because a product that is not covered under this Contract has caused an error. e) Customer service that has become necessary because devices have been used under adverse conditions (e.g. including contaminations and deviations from recommended room temperature and relative humidity) or in conjunction with accessories or (device-specific) consumables (e.g. including foreign disks, disk stacks, cassettes, printer paper and print heads of any type) (“Device Specific Consumables”) which do not meet the manufacturer’s specifications. f) Replacement of Device-Specific Consumables. g) Data backup. h) Calibration work that is not related to repair. 30. Restoration of Data/Programs The restoration of data and programs upon repair or replacement of a defective hard disk is limited to starting the copying program (Restore) used to restore the last full data backup. 31. Obligation of the Customer to Cooperate a) Hardware service Pre-conditions for the provision of Hardware services by MT are that the Hardware has been acquired legally and has been installed properly at the Customer’s site. In addition the Hardware affected must correspond to the current revision and be in proper condition when including in the Contract. These pre-conditions shall be met immediately after the expiry of the warranty period specified in the Contract. If the Hardware is included in the Contract at a later date, these pre-conditions must first be confirmed by a takeover inspection of the Hardware by MT, which will be independently invoiced and paid for by the Customer, and if required the pre-conditions will be achieved by MT undertaking the required repair work. b) Operating System Service Pre-conditions for the provision of operating system services are that the Customer has legally acquired the Software and has been granted the necessary corresponding Licence to use it. In addition the Software must be in the same condition as when it was delivered to the Customer. The services exclusively relate to the current release and version of the Software. If earlier Software versions are used, a one-time “Update Service” which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Operating System services will not be provided for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). Part VI Generally Applicable Conditions 32. Prices and Fees for Special Services The following items are not included in the payment for services under Conditions 26 and 28 above and will be invoiced separately in accordance with MT’s current price list: Services performed outside Working Hours on the express request of the Customer. Services to correct errors caused negligently by the Customer or by any unauthorised third party as a result of improper treatment, unsuitable operating media, unauthorised manipulations, Software manipulations, non-adherence to operating conditions or otherwise. ices required due to faulty handling, excessive vibration, chemical influence, excessive dust burden or non-adherence to the properties set forth in the unit specifications. Unreasonable wait times and delays in the performance of services which are caused by the Customer. Services to remedy failures caused by Force Majeure. 33. Backup of Customer Data Prior to the commencement of any service work undertaken by MT, the Customer will backup all data in such a way that it may easily be restored by MT in the event that it is lost in the service process. 34. Change of Installation/Application Site Where maintenance and care services are provided on an ongoing basis by MT, the Customer will immediately inform MT in writing of any change to the installation or application address. If such a change results in an increase in MT’s expenses. MT reserves the right to either increase the prices charged to recover the additional expense incurred or alternatively MT may serve notice on the Customer to terminate the Contract where the new address is outside United Kingdom. 35. Miscellaneous Service Conditions and Obligations of the Customer to Co-operate MT may appoint authorised third parties to provide services. The Customer may only transfer title to services to third parties with the prior written consent of MT. Where defective components or devices are replaced by MT, these will become the property of MT. Extension of the products included in the maintenance agreement may be included in this Contract with the consent of the Customer. On request, MT will offer to the Customer a corresponding extension of the Contract, provided maintenance for the respective product is available. Where MT has to perform any services, the Customer shall accurately and without delay provide MT with any/all information that is required to perform such services. The Customer will provide MT with the name of a competent and appropriately qualified contact person and will provide the name of an appropriate substitute in order for the Hardware and Software to be maintained. Any contact(s) will have participated in the respective Seminars and/or Training Sessions held from time to time by MT or alternatively will have acquired comparable knowledge. These contacts will be available to MT’s technicians on site or will have access to the MT’s hotline as applicable. Consumables and Auxiliaries (which shall include documentation, application programs, data, telephone lines for transmission of voice and data) are not included in the scope of performance and shall be provided by the Customer in the vicinity of the system, such consumables and auxiliaries will be provided during Working Hours or, with prior consultation, outside of these hours. Additionally, the Customer will provide to MT computing time and consumables as required. 36. Specifically Ordered Service Days If service days are ordered for call-off within a specified period, such orders are binding. The services will become due for payment once they have been performed or by the end of the defined time period at the latest. Specifically ordered service days to be called off within a defined time period, can still be called off during a time of three months beyond the expiry of such defined time period. Thereafter they are lost. The claim to payment is thereby unaffected. For users that register on our website (if any), we also store the personal information they provide in their user profile. All users can see, edit, or delete their personal information at any time (except they cannot change their username). Website administrators can also see and edit that information.

Message
1...101112

Courses matching "Chemical"

Show all 858

Chemical Hygiene and Engineering Training

4.3(43)

By John Academy

Enhance workplace safety with our Chemical Hygiene and Engineering Training. Explore topics such as chemical hazards, toxicology, storage, and personal protective equipment. Master best practices, regulatory compliance, and process safety, ensuring a secure environment. Join us for a comprehensive course designed to equip you with the knowledge and skills essential for chemical safety in laboratories and industrial settings.

Chemical Hygiene and Engineering Training
Delivered Online On Demand
£24.99

Chemical Hygiene and Engineering

By Course Cloud

Get ready to unlock a new level of expertise and confidence in handling the dynamic challenges of chemical safety, all from the comfort of your learning space.

Chemical Hygiene and Engineering
Delivered Online On Demand1 hour 30 minutes
£5.99

Chemical Engineering & Petroleum Refining

4.9(27)

By Apex Learning

Life Just Got Better This Summer! Save Up To £5,206 and get Hard Copy + PDF Certificates + Transcript + Student ID Card as a Gift - Enrol Now Tired of browsing and searching for the course you are looking for? Can't find the complete package that fulfils all your needs? Then don't worry as you have just found the solution. Take a minute and look through this 14-in-1 extensive bundle that has everything you need to succeed in Chemical Engineering and other relevant fields! After surveying thousands of learners just like you and considering their valuable feedback, this all in one Chemical Engineering bundle has been designed by industry experts. We prioritised what learners were looking for in a complete package and developed this in-demand Chemical Engineering course that will enhance your skills and prepare you for the competitive job market. Also, our Chemical Engineering experts are available for answering your queries and help you along your learning journey. Advanced audiovisual learning modules of these courses are broken down into little chunks so that you can learn at your own pace without being overwhelmed by too much material at once. Furthermore, to help you showcase your expertise in Chemical Engineering, we have prepared a special gift of 1 hardcopy certificate and 1 PDF certificate for the title course completely free of cost. These certificates will enhance your credibility and encourage possible employers to pick you over the rest. This Chemical Engineering Bundle Consists of the following Premium courses: Course 01: Basic Chemistry Online Course Course 02: Organic Chemistry Course 03: Organic Chemistry Demystified Course 04: General Inorganic Chemistry Course 05: Petroleum Refining Demystified Course 06: Diploma in Water Chemistry Course 07: Diploma in Water Treatment Course 08: Carbon Literacy Knowledge | Course Course 09: Understand Piping & Instrumentation Diagrams P&IDs Course 10: DSEAR Training Course 11: COSHH Training and Safety - Level 2 Course 12: Gas Safety Course 13: Electrical and Fire Safety Training - Level 2 Course 14: Ultimate Geology Course Benefits you'll get choosing Apex Learning for this Chemical Engineering: Pay once and get lifetime access to 14 CPD courses Certificates, student ID for the title course included in a one-time fee Free up your time - don't waste time and money travelling for classes Accessible, informative modules designed by expert instructors Learn at your ease - anytime, from anywhere Study the course from your computer, tablet or mobile device CPD accredited course - improve the chance of gaining professional skills How will I get my Certificate? After successfully completing the course, you will be able to order your CPD Accredited Certificates (PDF + Hard Copy) as proof of your achievement. PDF Certificate: Free (For The Title Course) Hard Copy Certificate: Free (For The Title Course) Curriculum of Chemical Engineering Bundle Course 01: Basic Chemistry Online Course Introduction to Basic Chemistry Understanding Matter Atom Chemical Bonding Energy Periodic Table Intermolecular Forces Gases Solution Chemical Equilibrium Kinetics and Equilibrium Acids and Bases pH and pOH Reactions Involving Acids and Bases Redox Reaction Electricity and Chemistry Inorganic Chemistry Organic Chemistry Biochemistry Nuclear Chemistry Industrial Chemistry Environmental Chemistry Laboratory Safety Chemical Hygiene Plan Course 02: Organic Chemistry Alkane series Alkene Series Alkanol Series Alkyne series Alkanals and Aldehydes Nomenclature Practices Course 03: Organic Chemistry Demystified About the Course Drawing Organic Molecules Resonance Acid-Base Reactions Geometry Nomenclature Conformations Configurations Mechanisms Substitution Reactions Elimination Reactions Substitution vs Elimination Addition Reactions Synthesis Techniques Wrapping Up and Bonus Course 04: General Inorganic Chemistry ABOUT THE COURSE Quantities and Units Atomic, Molecular and Molar Masses Formulas and Compositions Inorganic Nomenclature Chemical Equations Measurement of Gases The Ideal Gas Law Thermochemistry Atomic Structure Chemical Bonding and Molecular Structure Solids and Liquids Oxidation - Reduction Concentration of Solutions Reaction Involving Standard Solutions Properties of Solutions Thermodynamics Acids and Bases Complex Ions and Precipitates Electrochemistry Rates of Reactions Course 05: Petroleum Refining Demystified About the Course Overview of Crude Oil Refining Petroleum Properties Distillation and Fractionation Converting Petroleum Cuts Hydrofining Petroleum Cuts Cracking Heavy Petroleum Cuts Blending Operation Making Asphalts A Typical Refinery Operation Course 06: Diploma in Water Chemistry Introduction to Water Chemistry Concepts of Basic Chemistry Alkalinity of Water Hard Water and Basic Water Treatment Principles Water Treatment and Purification Chemical Processes of Water Treatment Inorganic Chemicals Volatile and Synthetic Organic Compounds Metalloid Section Metals and Heavy Metal Section Laboratory Safety Chemical Hygiene Plan Course 07: Diploma in Water Treatment Overview of Water Treatment Water Quality Wastewater Sampling and Analysis Preliminary Treatment Coagulation, Flocculation and Clarification Sedimentation Filtration Flotation Removal of Fats, Oils and Grease Inorganic Constituents Removal Ion Exchange Biological Process of Water Treatment Aerobic Processes of Biological Treatment Disinfection Course 08: Carbon Literacy Knowledge | Course Introduction to Carbon Literacy The Carbon Cycle Global Warming and Climate Change Solutions for Global Warming Steps to Take for a Cleaner Tomorrow Course 09: Understand Piping & Instrumentation Diagrams P&IDs INTRODUCTION ABOUT P&ID's INTRODUCTION TO P&ID READING BASIC P&ID SYMBOLS LET'S GET SOME PRACTICE : BASIC P&ID SYMBOLS P&ID DESIGNATION CODES THE IMPORTANCE OF PROCESS CONTROL CONTROL THEORY BASICS BASIC PROCESS CONTROL SYSTEMS (BPCS) ADVANCED PROCESS CONTROL SAFETY INSTRUMENTED SYSTEMS (SIS), INTERLOCKS AND ALARMS P&ID EXAMPLES : LET'S GET SOME PRACTICE Course 10: DSEAR Training Introduction to DSEAR ATEX and Explosive Atmospheres General Safety Safe Working with Flammable Substances Equipment and Protection System Risk Assessment Course 11: COSHH Training and Safety - Level 2 COSHH Explained COSHH Regulations Health Problems Related to Hazardous Substances Identifying Hazardous Substances COSHH Risk Assessments Control Measures and Monitoring Implementing Control Measures Course 12: Gas Safety Gas Safety Legislation Combustion Transmission System: Pipes and Flues Ventilation Tightness Testing Meter Regulator Check Appliance Pressures and Gas Rates Emergency Isolation Controls and Valves Gas Safety Devices and Controls Gas Warning Labelling Emergency and Evacuation Procedures Chimney Standards, Inspection and Testing Gas Appliances and Safety Course 13: Electrical and Fire Safety Training - Level 2 Introduction and Basics Introduction to Fire Safety Voltage and Resistance Capacitance and Capacitors Safety Precautions Fire Safety Legislation Measures of Fire Safety Fire Emergency: Evacuation Procedures Course 14: Ultimate Geology Course Course Promo Introduction Solar System Geologic Time Inside Earth Plate Tectonics Weathering Deserts & Winds Minerals Sedimentary Rocks Metamorphic Rocks Igneous Rock Deformation And Much More... CPD 150 CPD hours / points Accredited by CPD Quality Standards Who is this course for? Anyone from any background can enrol in this Chemical Engineering bundle. Persons with similar professions can also refresh or strengthen their skills by enrolling in this course. Students can take this course to gather professional knowledge besides their study or for the future. Disclaimer: Our comprehensive course will enhance your theoretical knowledge to help you explore your opportunities in relevant sectors. But please note that this course is not a professional qualification and will not allow you to work professionally. Requirements Our Chemical Engineering is fully compatible with PC's, Mac's, laptops, tablets and Smartphone devices. This course has been designed to be fully compatible with tablets and smartphones so that you can access your course on Wi-Fi, 3G or 4G. There is no time limit for completing this course; it can be studied in your own time at your own pace. Career path Having this various expertise will increase the value of your CV and open you up to multiple job sectors. Certificates Certificate of completion Digital certificate - Included

Chemical Engineering & Petroleum Refining
Delivered Online On Demand
£100

Chemical Spill

4.7(160)

By Janets

Register on the Chemical Spill today and build the experience, skills and knowledge you need to enhance your professional development and work towards your dream job. Study this course through online learning and take the first steps towards a long-term career. The course consists of a number of easy to digest, in-depth modules, designed to provide you with a detailed, expert level of knowledge. Learn through a mixture of instructional video lessons and online study materials. Receive online tutor support as you study the course, to ensure you are supported every step of the way. Get an e-certificate as proof of your course completion. The Chemical Spill is incredibly great value and allows you to study at your own pace. Access the course modules from any internet-enabled device, including computers, tablet, and smartphones. The course is designed to increase your employability and equip you with everything you need to be a success. Enrol on the now and start learning instantly! What You Get With The Chemical Spill Receive a e-certificate upon successful completion of the course Get taught by experienced, professional instructors Study at a time and pace that suits your learning style Get instant feedback on assessments 24/7 help and advice via email or live chat Get full tutor support on weekdays (Monday to Friday) Course Design The course is delivered through our online learning platform, accessible through any internet-connected device. There are no formal deadlines or teaching schedules, meaning you are free to study the course at your own pace. You are taught through a combination of Video lessons Online study materials Certification Upon successful completion of the course, you will be able to obtain your course completion e-certificate free of cost. Print copy by post is also available at an additional cost of £9.99 and PDF Certificate at £4.99. Who Is This Course For: The course is ideal for those who already work in this sector or are an aspiring professional. This course is designed to enhance your expertise and boost your CV. Learn key skills and gain a professional qualification to prove your newly-acquired knowledge. Requirements: The online training is open to all students and has no formal entry requirements. To study the Chemical Spill, all your need is a passion for learning, a good understanding of English, numeracy, and IT skills. You must also be over the age of 16. Course Content Module 01: Introduction to Hazardous Chemicals Introduction to Hazardous Chemicals 00:15:00 Module 02: Hazardous Chemicals and the Human Body Hazardous Chemicals and the Human Body 00:16:00 Module 03: Common Hazardous Substances Common Hazardous Substances 00:11:00 Module 04: Chemical Spills Chemical Spills 00:08:00 Module 05: Preventing Spills Preventing Spills 00:12:00 Module 06: Spill Response Spill Response 00:13:00 Module 07: Spill Cleanup Spill Cleanup 00:13:00 Module 08: Hazardous Waste Treatment and Disposal Hazardous Waste Treatment and Disposal 00:19:00 Module 09: Oil Spills Oil Spills 00:17:00 Module 10: Legislations Legislations Regarding Hazardous Chemicals in the UK 00:14:00 Assignment Assignment - Chemical Spill 00:00:00 Frequently Asked Questions Are there any prerequisites for taking the course? There are no specific prerequisites for this course, nor are there any formal entry requirements. All you need is an internet connection, a good understanding of English and a passion for learning for this course. Can I access the course at any time, or is there a set schedule? You have the flexibility to access the course at any time that suits your schedule. Our courses are self-paced, allowing you to study at your own pace and convenience. How long will I have access to the course? For this course, you will have access to the course materials for 1 year only. This means you can review the content as often as you like within the year, even after you've completed the course. However, if you buy Lifetime Access for the course, you will be able to access the course for a lifetime. Is there a certificate of completion provided after completing the course? Yes, upon successfully completing the course, you will receive a certificate of completion. This certificate can be a valuable addition to your professional portfolio and can be shared on your various social networks. Can I switch courses or get a refund if I'm not satisfied with the course? We want you to have a positive learning experience. If you're not satisfied with the course, you can request a course transfer or refund within 14 days of the initial purchase. How do I track my progress in the course? Our platform provides tracking tools and progress indicators for each course. You can monitor your progress, completed lessons, and assessments through your learner dashboard for the course. What if I have technical issues or difficulties with the course? If you encounter technical issues or content-related difficulties with the course, our support team is available to assist you. You can reach out to them for prompt resolution.

Chemical Spill
Delivered Online On Demand2 hours 18 minutes
£25

Chemical Engineering Courses for Beginners

4.9(27)

By Apex Learning

"The harmful emissions of CO2 are warming the planet because of the Greenhouse effect..". So, Just like everyone, you've heard these things before, numerous times, Right? Ever wondered how on earth the Carbon emissions result in this catastrophe? Yes! You're in the right place to quench your thirst for Chemistry and Chemical Engineering knowledge, upgrade your career to the next level, and achieve your dream career in the chemical industry. As we live in the era of the third Industrial revolution, specialised skills and expertise in science and engineering are of utmost importance. Chemists and Chemical Engineers are at the forefront of it. So, enrol now and sharpen your skills as a chemical engineer. Along with this Chemical Engineering course, you will get 11 premium courses, an originalHardcopy, 11 PDF Certificates (Main Course + Additional Courses) Student ID card as gifts. This Chemical Engineering Bundle Consists of the following Premium courses: Courses are included in this Chemical Engineering Bundle? Course 01: Basic Chemistry Online Course Course 02: Organic Chemistry Course 03: Organic Chemistry Demystified Course 04: General Inorganic Chemistry Course 05: Petroleum Refining Demystified Course 06: Diploma in Water Chemistry Course 07: Diploma in Water Treatment Course 08: Carbon Literacy Knowledge | Course Course 09: Understand Piping & Instrumentation Diagrams P&IDs Course 10: Gas Safety Course 11: Electrical and Fire Safety Training - Level 2 Learning Outcomes Upon successful completion of the Chemical Engineering course, you will be able to, Gain a basic knowledge of organic and inorganic chemistry. Learn about the petroleum refining process. Understand Water Chemistry and Water Treatment. Improve your Carbon Literacy Knowledge. Develop an in-depth understanding of Piping & Instrumentation Diagrams. Increase your workplace safety awareness. Enrol now in Chemical Engineering to advance your career, and use the premium study materials from Apex Learning. The bundle incorporates basic to advanced level skills to shed some light on your way and boost your career. Hence, you can strengthen your Chemical Engineeringexpertise and essential knowledge, which will assist you in reaching your goal. Certificate: PDF Certificate: Free (Previously it was £6*11 = £66) Hard Copy Certificate: Free (For The Title Course: Previously it was £10) CPD 120 CPD hours / points Accredited by CPD Quality Standards Who is this course for? Anyone from any background can enrol in this Chemical Engineering bundle. Requirements This Chemical Engineering course has been designed to be fully compatible with tablets and smartphones. Career path This Chemical Engineering course is designed to provide value for the following career paths Chemical Project Engineer Chemical Process Engineer Polymer Chemist Engineer Chemist Research Chemist Forensic Scientist Chemical Engineer Certificates Certificate of completion Digital certificate - Included

Chemical Engineering Courses for Beginners
Delivered Online On Demand
£53

Chemical Engineering: Chemistry, Biochemistry, Petroleum Engineering & Energy Management

By Compliance Central

Feeling Stuck in Your Career? The Chemical Engineering: Chemistry, Biochemistry, Petroleum Engineering & Energy Management Bundle is Your Skill-Building Solution. This exceptional collection of 30 premium courses is designed to encourage growth and improve your career opportunities. Suited to meet different interests and goals, the Chemical Engineering bundle provides an engaging learning experience, helping you learn skills across various disciplines. With the Chemical Engineering: Chemistry, Biochemistry, Petroleum Engineering & Energy Management bundle, you'll have a personalised journey that aligns with your career goals and interests. This comprehensive package helps you confidently tackle new challenges, whether entering a new field or enhancing your existing knowledge. The Chemical Engineering bundle is your gateway to expanding your career options, increasing job demand, and enhancing your skill set. By enrolling in this bundle, you'll receive complimentary PDF certificates for all courses, adding value to your resume at no extra cost. Develop key skills and achieve important progress in your career and personal development. Start your journey today and experience the transformative impact of the Chemical Engineering bundle on your job life and career growth! This Chemical Engineering: Chemistry, Biochemistry, Petroleum Engineering & Energy Management Bundle Comprises the Following CPD Accredited Courses: Course 01: Diploma in Basic Chemistry Level 3 Course 02: Organic Chemistry Demystified Course 03: General Inorganic Chemistry Course 04: Chemistry for Everyone Course 05: Carbon Literacy Knowledge Course 06: Biochemistry Course 07: Laboratory Technician Diploma Course 08: Diploma in Water Chemistry Course 09: Diploma in Water Treatment Course 10: Environmental Engineering Course 11: Environmental Health Course 12: Oil and Gas Management Course 13: Introduction to Petroleum Engineering and Exploration Course 14: Petroleum Refining Demystified Course 15: Instrumentation Training Including PID Control Course 16: Understand Piping & Instrumentation Diagrams P&IDs Course 17: Particle Physics Course 18: Diploma in Sustainable Energy Course 19: Renewable Energy: Solar Course 20: Environment Management Course 21: Chemical Spill Course 22: COSHH - Control of Substances Hazardous to Health Course 23: Chemical Hygiene and Engineering Course 24: Level 2 Health and Safety in the Workplace Course 25: Career Development Plan Fundamentals Course 26: CV Writing and Job Searching Course 27: Learn to Level Up Your Leadership Course 28: Networking Skills for Personal Success Course 29: Ace Your Presentations: Public Speaking Masterclass Course 30: Learn to Make a Fresh Start in Your Life What will make you stand out? Upon completion of this online Chemical Engineering: Chemistry, Biochemistry, Petroleum Engineering & Energy Management bundle, you will gain the following: CPD QS Accredited Proficiency with this Chemical Engineering bundle After successfully completing the Chemical Engineering bundle, you will receive a FREE PDF Certificate from REED as evidence of your newly acquired abilities. Lifetime access to the whole collection of learning materials of this Chemical Engineering bundle The online test with immediate results You can study and complete the Chemical Engineering bundle at your own pace. Study for the Chemical Engineering bundle using any internet-connected device, such as a computer, tablet, or mobile device. TheChemical Engineering: Chemistry, Biochemistry, Petroleum Engineering & Energy Management bundle is a premier learning resource, with each course module holding respected CPD accreditation, symbolising exceptional quality. The content is packed with knowledge and is regularly updated to ensure it remains relevant. This bundle offers not just education but a constantly improving learning experience designed to enrich both your personal and professional development. Advance the future of learning with the Chemical Engineering bundle, a comprehensive complete collection of 30 courses. Each course in the Chemical Engineering bundle has been handpicked by our experts to provide a broad range of learning opportunities. Together, these modules form an important and well-rounded learning experience. Our mission is to deliver high-quality, accessible education for everyone. Whether you are starting your career, switching industries, or enhancing your professional skills, the Chemical Engineering bundle offers the flexibility and convenience to learn at your own pace. Make the Chemical Engineering package your trusted partner in your lifelong learning journey. CPD 300 CPD hours / points Accredited by CPD Quality Standards Who is this course for? The Chemical Engineering: Chemistry, Biochemistry, Petroleum Engineering & Energy Management bundle is perfect for: Expand your knowledge and skillset for a fulfilling career with the Chemical Engineering bundle. Become a more valuable professional by earning CPD certification and mastering in-demand skills with the Chemical Engineering bundle. Discover your passion or explore new career options with the diverse learning opportunities in the Chemical Engineering bundle. Learn on your schedule, in the comfort of your home - the Chemical Engineering bundle offers ultimate flexibility for busy individuals. Requirements You are warmly invited to register for this bundle. Please be aware that no formal entry requirements or qualifications are necessary. This curriculum has been crafted to be open to everyone, regardless of previous experience or educational attainment. Career path Gain a wide range of skills across various fields, improve your problem-solving capabilities, and keep current with industry trends. Perfect for those aiming for career advancement, exploring a new professional direction, or pursuing personal growth. Begin your journey with the Chemical Engineering: Chemistry, Biochemistry, Petroleum Engineering & Energy Management bundle. Certificates CPD Certificates Digital certificate - Included

Chemical Engineering: Chemistry, Biochemistry, Petroleum Engineering & Energy Management
Delivered Online On Demand5 days
£210

Chemical Spill

4.9(27)

By Apex Learning

Overview This comprehensive course on Chemical Spill will deepen your understanding on this topic. After successful completion of this course you can acquire the required skills in this sector. This Chemical Spill comes with accredited certification from CPD, which will enhance your CV and make you worthy in the job market. So enrol in this course today to fast track your career ladder. How will I get my certificate? You may have to take a quiz or a written test online during or after the course. After successfully completing the course, you will be eligible for the certificate. Who is This course for? There is no experience or previous qualifications required for enrolment on this Chemical Spill. It is available to all students, of all academic backgrounds. Requirements Our Chemical Spill is fully compatible with PC's, Mac's, Laptop, Tablet and Smartphone devices. This course has been designed to be fully compatible with tablets and smartphones so you can access your course on Wi-Fi, 3G or 4G. There is no time limit for completing this course, it can be studied in your own time at your own pace. Career Path Learning this new skill will help you to advance in your career. It will diversify your job options and help you develop new techniques to keep up with the fast-changing world. This skillset will help you to- Open doors of opportunities Increase your adaptability Keep you relevant Boost confidence And much more! Course Curriculum 11 sections • 11 lectures • 02:18:00 total length •Introduction to Hazardous Chemicals: 00:15:00 •Hazardous Chemicals and the Human Body: 00:16:00 •Common Hazardous Substances: 00:11:00 •Chemical Spills: 00:08:00 •Preventing Spills: 00:12:00 •Spill Response: 00:13:00 •Spill Cleanup: 00:13:00 •Hazardous Waste Treatment and Disposal: 00:19:00 •Oil Spills: 00:17:00 •Legislations Regarding Hazardous Chemicals in the UK: 00:14:00 •Assignment - Chemical Spill: 00:00:00

Chemical Spill
Delivered Online On Demand2 hours 18 minutes
£12

Chemical Engineering Level 3 Advanced Diploma

By Learn Era

Embarking on a journey through the world of Chemical Engineering opens doors to a realm where innovation meets application. In the UK, this field is experiencing a surge in demand, with recent statistics showing a 15% increase in chemical engineering roles over the past year. This course, intricately designed, offers an in-depth exploration into the principles and practices of chemical engineering. It encompasses a comprehensive study, blending theoretical knowledge with real-world problem-solving skills. As sustainability becomes a global imperative, this course equips learners with the expertise to design and operate processes that are both efficient and environmentally friendly, a skill highly valued in today's industries. Learning Outcomes: Understand fundamental concepts in chemical engineering. Analyse chemical processes and systems efficiently. Design sustainable and efficient chemical processes. Apply safety and ethical standards in engineering. Utilise modern chemical engineering software tools. Develop solutions for global environmental challenges. Collaborate effectively in multidisciplinary teams. Communicate chemical engineering concepts clearly. Who Is This Course For? Individuals aspiring to become chemical engineers. Science graduates seeking specialised knowledge. Professionals in related fields expanding their expertise. Environmental enthusiasts focusing on sustainable solutions. Career changers interested in a dynamic and growing field. Why Choose Us? Lifetime access to course materials Full tutor support is available Monday through Friday for all courses Learn essentials skills at your own pace from the comfort of your home Gain a thorough understanding of the course Access informative video modules taught by expert instructors 24/7 assistance and advice available through email and live chat Study the course on your computer, tablet, or mobile device Improve your chances of gaining professional skills and earning potential by completing the course. Why should you study this course? The course offers a comprehensive introduction to the subject matter and provides a solid foundation for further study. It will also help students to gain knowledge and skills that can be applied in their professional or personal life. Assessment The course includes a series of quizzes that will test your understanding and retention of the material covered in the course. The quizzes will help you to identify areas where you may need further practice, and you will have the opportunity to review the course materials as needed. Upon successfully passing the final quiz, you will be able to order your certificate of achievement. Career Path: Chemical Engineer: £40,000 - £60,000 Process Engineer: £35,000 - £55,000 Environmental Engineer: £30,000 - £50,000 Biochemical Engineer: £32,000 - £52,000 Petrochemical Engineer: £45,000 - £65,000 Pharmaceutical Engineer: £37,000 - £57,000 Course Features Lectures 9 Quizzes 0 Duration Lifetime access Skill level All levels Language English Students 33 Assessments Yes Chemical Engineering Essentials Training Lecture1.1 Module 1: Introduction to Chemical Engineering Lecture1.2 Module 2: Principles of Chemistry and Physics Lecture1.3 Module 3: Process Calculations Lecture1.4 Module 4: Fluid Mechanics and Heat Transfer Lecture1.5 Module 5: Mass Transfer and Separation Processes Lecture1.6 Module 6: Chemical Reaction Engineering Lecture1.7 Module 7: Process Control and Instrumentation Lecture1.8 Module 8: Process Design and Safety Lecture1.9 Module 9: Materials Science in Chemical Engineering

Chemical Engineering Level 3 Advanced Diploma
Delivered Online On Demand6 hours 30 minutes
£29

Level 3 Chemical Engineering Training

By EduXpress

In the heart of innovation and environmental stewardship, Chemical Engineering stands as a pivotal force in the UK's industrial landscape. As the world navigates through challenges of sustainability and technological advancement, this course propels learners into the forefront of these endeavours. Recent statistics reveal that the UK's chemical industry contributes significantly to the economy, making this field not just a career choice, but a vital cog in national development. This course, rich in theory and contemporary applications, equips students with the knowledge to thrive in this dynamic sector. It is a fusion of science and industry, transforming raw materials into valuable products, and addressing global challenges through ingenious solutions. Graduates from this programme are the architects of tomorrow's world, driving change and innovation in an ever-evolving industry. Learning Outcomes: Master fundamental chemical engineering principles and theories. Analyse complex chemical processes and systems effectively. Design sustainable and efficient chemical production methods. Apply safety and ethical standards in chemical engineering. Utilise advanced software for process simulation and analysis. Develop solutions for environmental challenges in industry. Understand global trends and their impact on chemical engineering. Enhance skills in communication and teamwork within the sector. Who Is This Course For? Individuals aspiring to become chemical engineers. Graduates seeking a comprehensive understanding of the chemical industry. Professionals in related fields aiming to diversify their expertise. Students passionate about solving environmental and technological problems. Career changers interested in a dynamic and evolving industry. Why Choose Us? Lifetime access to course materials Full tutor support is available Monday through Friday for all courses Learn essentials skills at your own pace from the comfort of your home Gain a thorough understanding of the course Access informative video modules taught by expert instructors 24/7 assistance and advice available through email and live chat Study the course on your computer, tablet, or mobile device Improve your chances of gaining professional skills and earning potential by completing the course. Why should you study this course? The course offers a comprehensive introduction to the subject matter and provides a solid foundation for further study. It will also help students to gain knowledge and skills that can be applied in their professional or personal life. Assessment The course includes a series of quizzes that will test your understanding and retention of the material covered in the course. The quizzes will help you to identify areas where you may need further practice, and you will have the opportunity to review the course materials as needed. Upon successfully passing the final quiz, you will be able to order your certificate of achievement. Career Path: Chemical Engineer: £30,000 - £60,000 Process Engineer: £28,000 - £55,000 Production Manager (Chemical): £35,000 - £70,000 Quality Control Analyst: £25,000 - £45,000 Research Scientist (Chemical): £27,000 - £50,000 Environmental Consultant: £22,000 - £40,000 Course Content Chemical Engineering Essentials Training Module 1: Introduction to Chemical Engineering Module 2: Principles of Chemistry and Physics Module 3: Process Calculations Module 4: Fluid Mechanics and Heat Transfer Module 5: Mass Transfer and Separation Processes Module 6: Chemical Reaction Engineering Module 7: Process Control and Instrumentation Module 8: Process Design and Safety Module 9: Materials Science in Chemical Engineering

Level 3 Chemical Engineering Training
Delivered Online On Demand
£10.49

Chemical Hygiene and Engineering: Safety in Laboratories

4.5(3)

By Studyhub UK

Imagine walking into a laboratory, equipped not just with your intellect but a robust understanding of safety measures. Our course, 'Chemical Hygiene and Engineering: Safety in Laboratories,' serves as your comprehensive guide to maintaining a risk-free environment in scientific settings. From understanding toxicology to mastering the effective use of Personal Protective Equipment (PPE), we've got you covered. The curriculum unfolds across six meticulous modules that delve into the most pressing issues of laboratory safety. Get a detailed walk-through of chemical hazards, learn about storage and handling protocols, and understand what it takes to establish a culture of safety in your workspace. Module 4 even focuses on engineering controls, offering insights into the equipment designed to safeguard you from chemical exposure. Learning Outcomes Gain comprehensive insights into the principles of chemical hygiene and engineering. Develop a deep understanding of chemical hazards and toxicology. Acquire mastery in chemical storage and handling protocols. Become proficient in the use of PPE and engineering controls. Establish a culture of best practices for laboratory safety. Why buy this Chemical Hygiene and Engineering: Safety in Laboratories? Unlimited access to the course for forever Digital Certificate, Transcript, student ID all included in the price Absolutely no hidden fees Directly receive CPD accredited qualifications after course completion Receive one to one assistance on every weekday from professionals Immediately receive the PDF certificate after passing Receive the original copies of your certificate and transcript on the next working day Easily learn the skills and knowledge from the comfort of your home Certification After studying the course materials of the Chemical Hygiene and Engineering: Safety in Laboratories there will be a written assignment test which you can take either during or at the end of the course. After successfully passing the test you will be able to claim the pdf certificate for £5.99. Original Hard Copy certificates need to be ordered at an additional cost of £9.60. Who is this Chemical Hygiene and Engineering: Safety in Laboratories for? Aspiring scientists aiming to conduct experiments in a laboratory setting. Lab technicians seeking to improve their understanding of workplace safety. Safety officers responsible for implementing lab safety measures. Chemistry teachers focused on instilling safety measures in educational settings. Regulatory compliance specialists aiming to update their lab safety knowledge. Prerequisites This Chemical Hygiene and Engineering: Safety in Laboratories does not require you to have any prior qualifications or experience. You can just enrol and start learning.This Chemical Hygiene and Engineering: Safety in Laboratories was made by professionals and it is compatible with all PC's, Mac's, tablets and smartphones. You will be able to access the course from anywhere at any time as long as you have a good enough internet connection. Career path Laboratory Manager: Average salary range £35,000 - £50,000 Safety Officer: Average salary range £30,000 - £45,000 Chemical Engineer: Average salary range £40,000 - £70,000 Lab Technician: Average salary range £20,000 - £30,000 Chemistry Teacher: Average salary range £30,000 - £45,000 Regulatory Compliance Specialist: Average salary range £40,000 - £60,000 Course Curriculum Module 01: Introduction to Chemical Hygiene and Engineering Introduction to Chemical Hygiene and Engineering 00:11:00 Module 02: Chemical Hazards and Toxicology Chemical Hazards and Toxicology 00:17:00 Module 03: Chemical Storage and Handling Chemical Storage and Handling 00:20:00 Module 04: Personal Protective Equipment (PPE) and Engineering Controls Personal Protective Equipment (PPE) and Engineering Controls 00:24:00 Module 05: Laboratory Safety and Best Practices Laboratory Safety and Best Practices 00:27:00 Module 06: Chemical Process Safety Chemical Process Safety 00:20:00

Chemical Hygiene and Engineering: Safety in Laboratories
Delivered Online On Demand1 hour 59 minutes
£10.99
Show all 858