116 Courses

Mosaic workshops in Oxfordshire for private and group classes with Jenni Wren Creative. Choose from a number of creative projects for your home and garden and for all occasions for birthdays, to hen parties and just because.

Introduction: “Co-ordinating the temporary works process” This two day course is designed to assist those on site who have responsibility for managing all forms of temporary works. It is also designed to give confidence to senior management and those who engage contractors have reached an assessed standard of knowledge. The course has the support of a number of organisations: Temporary Works Forum CECA, UKCG, HSE and FMB. The support of these organisations offers transferability of the course within industry.Temporary works are usually safety and business-critical and require careful co-ordination. An accepted way of achieving this is through the adoption of the management process outlined in BS5975, which introduces the temporary works co-ordinator (TWC) as a key figure. This course explains the role and the overall management context within which it sits.High risk can occur on small as well as larger sites hence understanding the essentials of good safety risk management, as outlined in BS5975, is relevant for projects of all sizes. This course will give the delegate thorough knowledge of the Temporary Works Co-ordinator role however this does not alone make a delegate competent, as this requires other attributes e.g. experience. Aims and Objectives: This course is not a temporary works awareness course. It is only concerned with the process of co-ordination of temporary works, commonly expressed through the role of the Temporary Works Co-ordinator. Attendance does not confer competency as a Temporary Works Co-ordinator.The course gives emphasis, throughout, to: – The importance of communication, co-ordination, co-operation and competency. The ‘4Cs’. – Risk management: safety and also business relatedAllowing the Temporary Works Co-ordinator (TWC) to: – Understand the need for and duties of a TWC – Understand the role of others – Have a detailed knowledge and understanding of BS5975 in respect of this role. Assessment: The method of assessment will be by multiple-choice questions at the end of the course as well as being expected to be interactive during the course.Course Attendance:Delegates are required to attend both sessions, since without full attendance and achievement in the examination the Temporary Works Co-ordinator Training Course cannot be made.Delegates must attend the days in order and, where not on consecutive days, must complete the course within two weeks. Delegates unable to attend both days due to extenuating circumstances (e.g. certificated sickness) will need to enrol onto a new course in order to maintain continuity of learning outcomes and attend both days again. It is expected that experienced and competent Temporary Works Co-ordinators will attend this course. Competence comes from a mixture of education, training and experience and should be judged by an appropriate senior individual, usually referred to as the Designated Individual (DI). Training is considered an essential element of Temporary Works Co-ordinator competence. Background Publications: This course, including its group work and exercises, is constructed around BS5975:2008 +A1:2011. For Open Courses Delegates should bring a copy with them in order not to be significantly disadvantaged. For in house courses it is expected that the Tutor will tailor the course around the organisation procedures,providing they are comprehensive and follow the philosophy of BS5975. In these cases delegates will need a copy of their own procedures. In the absence of adequate procedures delegates will need a copy of the BS itself.Although the following is not mandatory, delegates may find the following useful– BS EN12811-1:20031 Temporary works equipment. Scaffolds. Performance requirements and general design– BS EN12812:2008. Falsework ‐ performance requirements and general design– BS EN12813:2004. Temporary works equipment. Load bearing towers of prefabricated components. Particular methods of structural design– NASC TG20/13 plus supplement 1– NASC TG9:12

This one day silver bangle making course lead by jeweller Kirsten Hendrich will introduce you skills and techniques required to design and make your own silver sterling bangles. You will learn how to size bangles, how to solder, texture the metal, cut out a charm, and also polish your designs. You will be provided with all the silver required to make two stacking bangles and a charm to accompany them. This is an excellent starting project for a beginner. For those with more experience, it is an opportunity to develop your skills further. WHEN: Sunday 8th December 10-5pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Amy Hubbard WHAT DOES THE DAY INVOLVE? This one day silver bangle making course will introduce you to the skills and techniques required to design and make your own silver sterling bangles. You will learn how to size bangles, how to solder, texture the metal, cut out a charm, and also polish your designs. You will be provided with all the silver required to make two stacking bangles and a charm to accompany them. This is an excellent starting project for a beginner. For those with more experience, it is an opportunity to develop your skills further. EXPERIENCE REQUIRED: None, all abilities are welcomed. Our small classes mean we are able to provide each student with the support they require. CLASS SIZE: 7 WHAT IS INCLUDED? – All tools and consumables are supplied – Light refreshments are provided The cost of this course includes materials. You will be given: Two lengths 21cm of 2 mm silver sterling round wire 10 cm of 1.2mm silver round wire 3 cm x 3 cm 0.8mm silver sheet We stock some silver, so should you wish to make additional bangles or thicker bangles, you can purchase additional silver on the day for your designs. WHAT TO BRING: For safety reasons, at each session closed in shoes must be worn and long hair tied back, we also suggest wearing old clothes. We will provide light refreshments however you might want to bring some lunch. We have a fridge, microwave and kettle in the workshop. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

During this day workshop you will be shown the techniques to create your very own bezel set ring. You will learn to set a cabochon stone (stones with a curved top and completely flat base). This is an excellent introduction to stone setting for those who have always wished to learn to set stones. For those with some experience, you can create a more detailed ring which explores textures and more advanced design techniques. WHEN: Saturday 26th October 10-5pm WHERE: Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Kirsten Hendrich WHAT DOES THE DAY INVOLVE? During this day workshop you will be shown the techniques to create your very own bezel set ring. You will learn to set a cabochon stone (stones with a curved top and completely flat base). This is an excellent introduction to stone setting for those who have always wished to learn to set stones. For those with some experience, you can create a more detailed ring which explores textures and more advanced design techniques. We will have some stones available to choose at the workshop, however feel free to bring along any stones you may wish to set. Time and materials allow you to create one ring. Some stones might not be suitable due to size or shape, so please be aware if you do bring along your own stones, it might not be suitable for the setting technique but we will advise you on the day. Stones shouldn’t be smaller than 8-10mm for those new to setting as they can be hard to work with and is it harder to see the processes involved in setting. EXPERIENCE REQUIRED: None, all abilities are welcomed. We support you throughout the session and provide demonstrations to show you the techniques and steps needed to create your project. CLASS SIZE: 7 WHAT IS INCLUDED? All tools and consumables are supplied YOU WILL BE PROVIDED WITH: 2xm x 2cm 0.5mm silver sheet 15cm bezel strip 5mm high one stone 10cm 2mm silver round wire WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Also pack your own lunch, snacks and drinks for the session. We regret we can’t offer tea and coffee at the moment due to Coronavirus so make sure you bring enough refreshments and supplies to keep you going during the day. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

Create your very own silver chain bracelet during this day workshop. We will guide you through all the processes involved in creating your own design. From cutting, shaping and texturing the silver, through to soldering and polishing. You will create each link and a T bar clasp. This is a fantastic project to help you learn or improve your soldering skills, and a great introduction to jewellery making. WHEN: Saturday 16th November 10-5pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Kirsten Hendrich WHAT DOES THE DAY INVOLVE? Create your very own silver chain bracelet during this day workshop. We will guide you through all the processes involved in creating your own design. From cutting, shaping and texturing the silver, through to soldering and polishing. You will create each link and a T bar clasp. This is a fantastic project to help you learn or improve your soldering skills. If you are looking for some inspiration, we have created a Pinterest board to help inspire some ideas. You will be provided with 1.2mm thick wire for your links. We work really hard to make sure our students love what they create, so if you have a chunkier design idea in mind, please get in touch as the material costs increase and it can be more difficult to create thicker links, so we just need to check it is achievable within the time frame. EXPERIENCE REQUIRED: None, all abilities are welcomed. We support you throughout the session and provide demonstrations to show you the techniques and steps needed to create your own chain bracelet from start to finish. Our small classes mean we are able to provide each student with the support they require. Students must be 16+ Students aged 14 or 15 are able to attend if accompanied by an adult. CLASS SIZE: 7 WHAT IS INCLUDED? All tools and consumables are supplied. The cost of this course includes materials. YOU WILL BE PROVIDED WITH: 10cm of 2mm round wire to create your clasp 1.5 metres of 1.2mm silver round wire for your bracelet links If you wish to purchase additional silver to create alternative link thicknesses (should time allow), we stock silver which you are able to purchase on the day but please run your ideas through with us first by emailing hello@workshop925.com WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Please bring any PPE, snacks and drinks to each session. We have a microwave, kettle and fridge to store or cook your lunch choices. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

Career coaching programmes support you in advancing your career aspirations in a practical and realistic manner. By looking at the specificities of your situation and nurturing your inner resources, the coach will empower you to make the right decisions for your career.

A two-day, beginner, hands-on course to rebuild a section of dry-stone wall, learning the age old techniques of this satisfying craft

A two-day, beginner, hands-on course to rebuild a section of dry-stone wall, learning the age old techniques of this satisfying craft

A two-day, beginner, hands-on course to rebuild a section of dry-stone wall, learning the age old techniques of this satisfying craft

Only 12 places available, so please do hurry booking as this exclusive tasting will sell out quickly. There will be no more opportunities to taste these extremely rare wines. These Champagnes were released in very small quantities in the first place and then aged in my own wine cellar to perfection, so none of them are still available on the market to purchase.