1132 Courses

BYOB Ultimate Pottery Experience

Create a fabulous and unique free-standing serpentine wave form in fused glass; finished size is approximately 15cms tall by 38cms wide by 5cms deep. Jill Bagnall, designer-maker at Fusing Ideas Glass, will introduce you to kiln-forming and the skills required to create a beautiful & unique work of art that will look fabulous in your home. Everything you need is supplied; equipment and lovely coloured glass, plus guidance and advice to create your design; no previous experience is necessary. Creativity Unleashed; the perfect way to relax & unwind.

This is a full day intensive workshop which will teach you the processes involved in photo etching, including preparing the metal for etching, transferring the designs onto the metal using press and peel (P&P) paper and how to use specific etching solutions to cut the designs into the metal. This course will allow you to broaden your design process so that you can add some intricate textures to your copper and silver jewellery designs. You will be provided with a set amount of materials including copper sheet to practice the process and a 4cm by 4cm piece of silver sheet to create a silver textured pendant during your session. WHEN: Sunday 13th October 10-5pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Krista Thomson WHAT DOES THE DAY INVOLVE? This is a full day intensive workshop which will teach you the processes involved in photo etching, including preparing the metal for etching, transferring the designs onto the metal using press and peel (P&P) paper and how to use specific etching solutions to cut the designs into the metal. This course will allow you to broaden your design process so that you can add some intricate textures to your copper and silver jewellery designs. You will be provided with a set amount of materials including copper sheet to practice the process and a 4cm by 4cm piece of silver sheet to create a silver textured pendant during your session. If you would like to create additional designs, you are welcome to bring along your own additional flat silver sheet, it must be no thinner than 0.6mm. This is a great opportunity to stock pile some great patterned silver for us with future projects. On the day you will be provided with some patterns to etch, if you have a set pattern in mind, please send us the artwork in good time for your class. Designs must be black and white only and please note smaller patterns work better than larger ones. Please email it to us at hello@workshop925.com. Alternatively instruction on where to purchase P&P paper and how to print your own designs onto it will be sent out prior to your course date to those of you who wish to etch your own designs. You will be etching the majority of the day, however if you would like to create a finished design, we can accommodate this, you can do some etching in the morning and create a design in the afternoon. EXPERIENCE REQUIRED: None, all abilities are welcomed. This course is a great introduction to etching for those who have a vast experience in jewellery making but have not yet tried this technique as well as beginners looking to create beautiful textural pieces of jewellery. Our small classes mean we are able to provide each student with the support they require. CLASS SIZE: 6 WHAT IS INCLUDED? All tools and consumables are supplied Please bring refreshments as we are no longer able to provide them The cost of this course includes copper sheet to practice the technique and a 4cm by 4cm section of silver sheet. The price also includes a selection of patterns printed on P&P paper to use during your course.  WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Please bring any PPE, snacks and drinks to each session. We regret we can’t offer tea and coffee at the moment due to Coronavirus. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

This class is about getting to grips with Tube Setting. You will have to option to create a pendant or ring – maybe even two pieces if time allows. Krista will guide you through the process of tube setting where you will be using the Foredom Pendant Motor to cut a seat for your facetted brilliant cut stone. From here you can design and make your pendant or ring, solder your setting in place and then learn the techniques to set your stone. WHEN: Sunday 15th September 10-5pm WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Krista Thomson WHAT DOES THE DAY INVOLVE? This class is about getting to grips with Tube Setting. You will have to option to create a pendant or ring – maybe even two pieces if time allows. Krista will guide you through the process of tube setting where you will be using the Foredom Pendant Motor to cut a seat for your facetted brilliant cut stone. From here you can design and make your pendant or ring, solder your setting in place and then learn the techniques to set your stone. Krista will guide you through each stage and there is time to practice settings so your can really understand the process correctly. We will be working with 4mm round facetted brilliant cut stones. If you would like to bring along your own stones, that is not a problem, Krista can advise if they are suitable on the day. We will work with Cubic zirconias as they are affordable, strong and perfect while you practice. Each student has their own fully equipped bench with its own Foredom Pendant Motor. We have put together a Pinterest Board to show how tube setting can be used within jewellery making. EXPERIENCE REQUIRED: It will help to have some experience with basic making skills. CLASS SIZE: 6 WHAT IS INCLUDED? All tools and consumables are supplied YOU WILL BE PROVIDED WITH: 0.8mm silver sheet – 0.5cm wide x 9cm length – for a band ring or pendant design. 2mm silver round wire – 15cm Length – for a pendant or 2 rings 4.5mm silver tube – 7cm 4mm Cubic Zirconias x 3 WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Also pack your own lunch, snacks and drinks for the session. We regret we can’t offer tea and coffee at the moment due to Coronavirus so make sure you bring enough refreshments and supplies to keep you going during the day. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange. Gift Voucher – if you have a voucher to redeem, please email us before booking on hello@workshop925.com Please check your dates carefully before booking a class as we are unable to offer refunds. See our Terms & Conditions for full details.

Stained Glass - LEADING ONE DAY Workshop  9.00am - 15.00pm

Alien spoons? Well, only because it is a memorable name and some of the knife grasps feel a bit alien to start with. You will soon get to grips with them and the focus of this workshop is learning to use safe and efficient carving techniques with hand tools - the axe, straight knives and hook knives... maybe also a drawknife on a shave horse. By following good technique you will avoid injuries and with regular stretching this will help you to look after your body as well as the tools. You should leave with the knowledge and confidence to carve safely at home. The tools are relatively cheap and easy to use in a small space. You will have access to a range of tools, but primarily use the Mora wood carving knives (106/120/164s) and be shown traditional designs for optimising strength and utility. Using these traditional tools you will make a spoon from local and sustainable fresh cut green wood - starting with a log and leaving with a spoon. From the initial splitting of the log with a froe or axe, trimming this down with an axe, and on to carving finer details and decorations with knives. Additional skills in building a shave horse and other green wood working can also be taught. This course is run from close to central Edinburgh and is accessible by public transport.  Depending on the weather it can be inside or outdoors in the wildlife garden. Courses can also be arranged to suit your availability! Please get in touch to discuss your requirements, discounts are available for small groups or multiple days. Course numbers are usually limited to five or less; individual training courses can also be arranged. What's included in the price? Tea, coffee, light lunch of bread and soup and snacks - All vegan Professional training in the use of a range of traditional tools. Advice on tool care and sharpening. Fresh cut (green) wood for carving. Some tools available for sale at competitive rates. Summary of course information emailed to you after the workshop.

Learn how to create your very own terrazzo tray from start to finish!

Learn how to make really fun and creative bowls from rope and bits of scrap fabric. I will teach you all you need to know and I will supply all you need to get going. It is SO fun and SO versatile! You decide on the shape, size and colours! This is a very practical and hands on class which will see you making stuff in no time. All tools, use of machines and materials are included. The class will finish around 1pm

This course will introduce you to the beautiful world of colour analogue photography. Taking as a starting point the work of contemporary photographic artists working with colour, we will discuss and explore theory as well as developing core skills essential for the capture and printing of your own colour images. You will learn how to correctly expose colour negative film and learn more about the characteristics of different types of film and the effects that they can have on an image. Within Stills’ darkrooms you will learn how to process your colour film by hand and print high quality analogue C-Type prints. Day 1 Morning: Colour Theory, Inspiration and Refresher for SLR Camera Controls During the morning we will be looking at contemporary photographers and artists that have used colour to inform their practice in specific ways. We will look at the ways in which colour revolutionized the artworld and vernacular photography. We will also look at basic colour theory, exploring which colours compliment each other and why. We will also refresh basic camera controls, load cameras and head out to the streets to shoot a roll of film. Afternoon: Colour Film Processing During this session, you will learn how to hand process your colour film. We will discuss the loading of the tank and the preparation of the machine to ensure correct processing temperature. We will look at different film types, why you may want to use them and the range of effects that can be produced. Day 2 Morning: Introducing the Colour Darkroom and Contact Sheets You will be introduced to Stills colour darkooms and become familiarised with the range of equipment you will be using. You will be taught how to set up your darkroom for printing, how the colour print processor works and how to print a contact sheet for viewing your negatives. Afternoon: Printing In the afternoon you will be expected to make a series of final C-Type prints. You will be shown techniques to improve your printing skills and produce the images you desire. This last session will allow you time to print with some one-to-one attention. We will discuss some printing techniques to help you get the most from your negatives. We will also have time at the end of the day to look back on all the work produced over the course and discuss it in relation to theory we learnt at the beginning. By the end of the course you will have: Learned more about colour theory and have a knowledge of contemporary artists working with colour photography Learned to process your own colour film Experimented with a variety of specialised darkroom printing techniques Printed contact sheets and a collection of colour photographs Feel confident in a colour darkroom using specialist equipment   Courses are subject to minimum enrolment. Please register early, within five days of the start date, to reduce the likelihood of course cancellation. Please read our cancellation policy before booking. Students, anyone over the age of 65, and those in receipt of any form of benefits can claim the concessionary price, offering a 10% discount on the full course price. Valid proof of eligibility must be produced on the first day of the course. Please use the code CONCESSION when prompted at checkout.

Unlike other weekend classes which involve completing a specific project, this class hands the control over to you. You are able to design and make a project of your choice, that may be a project with the aim to practice a certain skill, or maybe you are looking to make a special present, or create something you have always wanted to own, this class provides you with the tutor support, professional tools and a friendly, welcoming environment to make your own designs. This is for current term time or summer term time students only. WHEN: Saturday 3rd August 10-5pm 2024 TUTOR: Sarah Reece WHERE:  Workshop 925 based at The Mayford Centre, just outside of Woking and very close to Guildford. Unit F9 The Mayford Centre, Mayford Green Woking, Surrey  GU22 0PP TUTOR: Sarah Reece WHAT DOES THE DAY INVOLVE? Unlike other weekend classes which involve completing a specific project, this class hands the control over to you. You are able to design and make a project of your choice, that may be a project with the aim to practice a certain skill, or maybe you are looking to make a special present, or create something you have always wanted to own, this class provides you with the tutor support, professional tools and a friendly, welcoming environment to make your own designs. This is for current term time or summer term time students only. Our workshop is equipped with everything a jeweller could wish for. You will have your very own solid jewellers workbench to work on to complete your projects and your own tool kit meaning you won’t have to wait for tools. Your bench is also equipped with its own pendant motor. In the workshop you will also find soldering equipment on each bench, a wide range of professional stone setting tools for various stone setting styles, a wide range of hand tools, texturing tools, a rolling mill, a hydraulic press, polishing equipment, dapping tools and punches, all of which will allow you the chance to create your designs within a professional setting. EXPERIENCE REQUIRED: You must be enrolled on our term time class or summer term or have experience. CLASS SIZE: 7 WHAT IS INCLUDED? All tools and consumables are supplied Please bring refreshments The cost of this course does not include materials. WHAT TO BRING: For safety reasons, during each class, you are required to wear appropriate footwear, we request that no open toed shoes are worn within Workshop 925. Long hair should also be tied back when working with the equipment. You may also wish to bring a notebook. We have handouts for many demonstrations, but there are always many tips and tricks given verbally by the tutor, which some might like to keep note of. Please bring any PPE, snacks and drinks to each session. We regret we can’t offer tea and coffee at the moment due to Coronavirus. PAYMENT OPTIONS: You can pay via our website or in our workshop in person using our card machine. If you prefer to pay directly, you can email us on hello@workshop925.com and we can invoice you manually to arrange a bank transfer. For classes over £80, instalment options are also available. Please email us on hello@workshop925.com to arrange.