8450 Courses

Our foundation lip filler course is designed for learners wanting to enter the industry at a beginner level and specialise in lip augmentation. Our goal at the Cosmetic College is to deliver the highest quality training in dermal fillers using the safest and most up-to-date techniques. Our courses are carried out in small groups; This enables us to provide you with a training programme tailored to your needs, with more time and emphasis on the hands-on practical sessions. Course Prerequisites This course is suitable for those with or without a medical background. It is designed to provide the student with the ability to seek employment or start their own business upon qualification. At a minimum, students will be required to be qualified at least one of the following: Medically qualified as a nurse, doctor or dentist with current registration with the NMC, GMC or GDC. NVQ Level 3 in Beauty Therapy, ITEC or HND 12 months of needling experience 6 Months micropigmentation experience and Anatomy & Physiology Level 3 Please note that if your qualification does not appear above, we offer a fast track access course for those completely new to the industry.  Course Pre Study 40 hours of E-learning A series of online assessments 2 Days of Practical training Anatomy and physiology of the face Infection control Sharps and hazardous waste training First aid and anaphylaxis training Introduction to dermal filler injection techniques Elective and emergency dissolving Injection techniques practice Danger zones training Vessels, muscles, fat pads workshop Professional live demonstrations Legal requirements, obtaining consent with consultation techniques and documentation Practical training Clinical setup procedures Areas CoveredLips Professional KitDermal filler (Used for training) Numbing creamMassage gelChlorhexidine pre-injection wipesSterile treatment packsGlovesSurgical face masksSkin marker pencilsIce packConsultation forms

This is a full 4 day course covering the requirements of commercial fire alarm systems to BS 5839 Part 1 2017 Code of Practice for Design, Installation, Commissioning and Maintenance of Systems in Non-Domestic Premises. This is one of the few externally examined Level 3 courses available and is supported by the Fire Industry Association (FIA) and Independent Fire Engineering & Distributors Association (IFEDA). All successful delegates will receive a EAL Level 3 Award in the Requirements of Fire Detection and Fire Alarm Systems for Buildings BS 5839-1:2017

First Half During the first half of our sessions, there will be a demonstration on how to create Natural, Bridal & Glam Makeup. You will be able to take notes and ask questions Second Half During the afternoon sessions, students will recreate the look on a model other using our Academy Makeup kit. You will also be able to take photos of your work to start building your portfolio using professional lighting. Please bring a model for the second half of the session. If you would like us to arrange models let us know Course dates 5pm - 8.30pm Course dates (Evening) 9th, 16th & 23rd January 2024 11th, 18th & 25th January 2024 6th, 13th & 20th February 2024 (Tuesdays) 8th, 15th & 22nd February 2024 (Thursdays) £795 Deposit £100 Professional makeup brush set (worth over £100.00) 3 evenings of group training at our Academy creating Natural, Bridal and Glam makeup Makeup manual and notepad Business and social media advice Accredited Makeup Qualification Natural, Bridal & Glam Makeup Evening 5pm - 8.30pm Course Deposit £100£100 Deposit Remaining balance due on the first day of the course if paying in cash or bank transfer before the course startsFinance options available with Payl8r for our courses. Before booking onto our course, email us for a link to apply for finance. Select pay in 3 interest free payments or spread for longer. Interest rates vary subject to status and start at 1% per month. Application fees may apply

For those seeking perfection in polishing techniques. The UKDA Advanced Machine Polishing (professional) Course is a day for those who would like to develop their technique further on all machine styles to produce the high-end, high-efficiency finish that is the marque of the most accomplished detailers. Taking cues from any existing experience, we will push the boundaries of your polishing abilities over the edge, running rotary DA and forced drives to their limit to give to the skills to drive up your efficiency and perfect paint like never before. The UKDA Advanced Machine Polishing (professional) Course is a 2 day for those who would like to develop their technique further on all machine styles to produce the high-end, high-efficiency finish that is the marque of the most accomplished detailers. Far from there being a consistent method - there are a number of subtle variations you can make to what would be termed a 'standard' technique which will speed up your process, enhance further your gloss extracting capabilities and make the right choice in machine based on paint types, conditions and ancillary equipment. On this day we will run through variables in speed and pad choices, show the differences ambient temperature and rebound can make to a job, explain the different approaches based on clear coat solids, look at how far you can push a painted surface, and much much more. The course is run over two full days (9.30 am - 4.30 pm) and picks up where both our introduction course and the Flexxpert Seminar leave off, so is also the perfect follow-up to those who have attended either course, in addition to those who want to learn all about machine polishing in every style. Alternatively, if you are machine polishing in your day-to-day work outside of detailing and feel you have scope to improve, or you keep coming up against small issues, this is the course for you. Not sure if it suits you? Why not call or message one of our team, and we'll be happy to discuss which course is right for you. Course Length 2 Days (0930-1600) Group Size One-to-One, Up to 2 people Location UK Detailing Academy, 2 Purlieus Barn, Ewen, Cirencester, GL7 6BY Experience / Qualification Competent with preparation and decontamination procedures Refreshments or Lunch Lunch NOT included, Refreshments included

Training is on Days 1-3. Testing will be on either day 4 or day 5. Course structure: Establish the weight and dimensions of loads and communicate this information to the crane operator. Select appropriate lifting tackle and attach and detach it correctly and safely. Use clear and unambiguous signals to direct the actions of a crane moving loads of various weights and dimensions. Determine the serviceability of lifting accessories, and maintain and store them. Includes ‘Pick & Carry’ Duties training and testing. The course runs for 4 days (3 days of training and 1 days for technical tests). Instructions You must also bring your own PPE (boots, hi vis vest or jacket, hard hat and gloves). NB VERY IMPORTANT: All candidates must provide identification in the form of a current Photo ID Driver Licence or Passport. If you do not have one of these please call or email us to ask what suitable alternatives might be. If you are undertaking a CPCS course you MUST have passed an approved CITB or NOCN Health, Safety and Environment Test within the last 2 years. If you are unsure about this requirement, please contact us at cpcs@handsonskills.co.uk. If there are any queries regarding this booking, or if you would like to talk to us about further training requirements, please do not hesitate to contact us. You can contact us from Monday to Friday between 09.00 to 16.00 on: Tel: 020 7511 7881 and by email to cpcs@handsonskills.co.uk Before you attend the course, please read the joining instructions and training terms and conditions. It is very important that the course delegate understands the course objectives and complies with the centre rules before attending the course in order to gain maximum value from training. Details of the course are as follows: Registration and course timings: Courses will start at 08:00. You should aim to be at the centre a minimum of 15 minutes prior to the course start time for signing in. There is a half hour break at lunch time (approximately at 12:00) and courses generally finish between 15.30 and 16.00. Depending upon the course content, the instructor may require the course to start and finish at different times on subsequent course days (if any). 📎 SLINGER_manual_PDF_v1.pdf

Course Information Designed to develop personal proficiency in audit planning, execution and reporting, this course is meticulously crafted to refine essential audit skill sets. Through immersive scenarios focused on on-site audit conduct (with an alternative Remote Auditing Course available), participants will engage deeply in the audit process. Extending Expertise: Applicable across all audit types, this course builds upon and enriches the foundational concepts taught in RQA's suite of research quality assurance courses. From 'Research Quality Assurance for Good Laboratory Practice' to 'Good Clinical Practice Auditing – Principles and Practice' and 'Good Manufacturing Practice for Investigational Medicinal Products,' this programme extends the scope of learning. Relevance and Value: Relevant to any area of regulated research and development, this course shines particularly in contexts mandating a quality system for audit. Participants with prior audit experience will gain maximum value from this course.  Key Benefits: Enrich your skill set to: Navigate audit processes encompassing planning, execution, reporting, and follow-up Embrace a personalised approach fostering positive audit outcomes Analyse evidence and present cohesive audit findings Recognise the pivotal role of audits in driving continual improvement. Interactive Learning: Structured to foster dynamic engagement, this course encourages delegates to: Engage in discussions, idea development, and problem-solving Exchange invaluable information and experiences. Hands-On Experience: A highlight of this course is the series of practical workshops, where delegates work in small syndicate groups, applying the acquired skills from lectures into real-world scenarios. Tutors Tutors will be comprised of (click the photos for biographies): Andrew Waddell Founder Director, Tower Mains Ltd Rosemary Ichaba Senior QA Associate, Tower Mains Ltd Cate Ovington Director, The Knowlogy Group Ltd Jean McWilliam Associate Director, Alexion View pop up Programme Please note timings may be subject to alteration. Day 1 08:45 Registration 09:00 Welcome and Course Objectives 09:10 What is 'Audit'? Delegates explore the range of audits which they have experienced, define the purpose of each audit type and establish which of those audits are performed to meet regulatory requirements. 09:30 Audits and their Purpose The concepts of quality assurance, quality control, quality management and audit are discussed. 10:30 Break 10:45 Audit Planning The requirements for an effective audit programme and individual audit plans. 11:30 Workshop 1 - Getting the Audit Started Planning for the audit. 12:25 Workshop 1 - Feedback 12:45 Lunch 13:30 Workshop 2 - Getting the Audit Started Arranging the opening meeting. 13:50 Workshop 2 - Feedback Audit initiation. Review and discussion of the role of the opening meeting. 14:25 Auditing Techniques (1) - Data and Documentation Techniques for the conduct of data and report audits are investigated. 14:55 Break 15:10 Workshop 3 - Data and Documentation Audit Conducting an audit of a data package and supporting documentation. 17:15 Close of Day Day 2 09:00 Auditing Techniques (2) - The People Questioning techniques which get the required information from the auditee. 09:45 Live Audit Role Play Auditor and auditee behaviours are explored and strategies developed for successful audit interactions. 10:15 Break 10:35 Audit Closing Meeting An exploration of audit closing meetings. 11:00 Workshop 4 - Audit Observations and Preparing for the Closing Meeting Reviewing and categorising your observations and getting ready to present your case. 11:45 Workshop 4 - Feedback 12:30 Audit Reports The content and distribution of an effective audit report are investigated and the importance of effective written communication is discussed. 13:00 Lunch 13:45 Workshop 5 - Audit Reports and Follow-up Mechanisms for promoting effective corrective and preventive action. Critical review of an audit report example. 14:30 Workshop 5 - Feedback 14:55 Corrective and Preventive Action and Follow-up The auditor's role in monitoring responses to audit and the corrective and preventive actions promised is explored. 15:20 Panel Session An opportunity to get answers to outstanding questions. 15:30 Close of Course Extra Information Course material Course material will be available in PDF format for delegates attending this course. The advantages of this include: Ability for delegates to keep material on a mobile device Ability to review material at any time pre and post course Environmental benefits – less paper being used per course. The material will be emailed in advance of the course and RQA will not be providing any printed copies of the course notes during the training itself. Delegates wishing to have a hard copy of the notes should print these in advance to bring with them. Alternatively delegates are welcome to bring along their own portable devices to view the material during the training sessions. CPD Points 14 Points   Development Level Develop

This course is an introduction to styling dogs. You will spend 15 full days on site doing practical learning with our fabulous dog models and tutors. There are 5 written modules, grooming diaries and 2 practical assessments at the end of the 15 days. This qualification is aimed to take students on a journey from complete beginners to be able to groom a selection of breeds.

5 day Bespoke Onsite Electrical Course

Our new 20 day part time program is designed to develop students over a longer period to develop their skillset, knowledge and learn all things barbershop in a barbershop environment. You will be taken on a journey by our experienced Educators with in-depth lectures and demonstrations. Students will work initially on real hair mannequin heads before transitioning to clients, all provided by the Academy, learning the renowned Sid Sottung method of hair design. Our nurturing educators work to develop each student until services can be performed independently.

rya competent crew course UK, sailing scotland,