517 Courses

NPORS Excavator as a Crane (N100)

#SafeUrbanDriving #Birmingham #driver #driver_safety #driver_training #fors #nottingham #sud

2 Day First Aid Refresher Description:The 2 day First Aid at Work Requalification Course is nationally recognised. It meets the standards required to help comply with Health and Safety (First aid) regulations. The 2-Day first Aid at Work Refresher Course is appropriate for candidates who are currently holding an in-date and valid full First Aid at Work Qualification. Upon completion of the course the candidates qualification is renewed for a further three years. Cardio Pulmonary Resuscitation and care of the unconscious requires physical effort. Learners should be capable of working with casualties at floor level. Learners receive a First Aid at Work guide book, a training dressing and a CPR barrier protection device. The HSE strongly recommend that all First Aiders undertake annual refresher training of at least 3 hours per year. Syllabus Care of the unconscious casualty Method of resuscitation Asphyxia Wound & bleeding Bandaging/slings Head and chest injuries Fractures Poisons Burns and scalds Epilepsy Diabetes Heart conditions Contents of a first aid box Accident reporting Other work related accidents/illnesses Scenarios AED (defibrillation) training Cost: £177.00 + VAT

First Aid - Level 3 Emergency First Aid at Work One Day Course Cost:  £75 + vat per person SYLLABUS A range of subjects are covered, including:- Responsibilities & Reporting Assessment of the situation Dealing with an unresponsive casualty Basic Hygiene in First-Aid CERTIFICATION Resuscitation & AED Awareness Anatomy Minor injuries Bleeding control Burns Choking Epilepsy Shock Maximum of 12 People All learners will have the skills and knowledge to provide the organisation with Emergency First Aiders who can provide treatment to their casualties in a prompt, safe and effective manner. This accredited One-Day Qualification meets the requirements of the Health & Safety (First Aid) Regulations 1981 and the Health and Safety (First Aid) Regulations (Northern Ireland) 1982. The Certificate is valid for 3 years and will expire from the date on the certificate. First Aid • Life-Saving Skills First Aid Training is not just a Course; it’s a life-saving skill everyone should possess. It’s about being prepared for the unexpected knowing how to respond when seconds count. As Health & Safety Law mandates, employers must create a secure and healthy environment for their employees. This responsibility extends to providing immediate and effective First-Aid Care when necessary. We understand that learning is best achieved through practical application. That’s why we offer In-Person Workshops on First Aid. These workshops provide hands-on experience under the guidance of our highly qualified trainers. You’ll have the opportunity to practice what you’ve learned in a controlled environment before you need to apply it in real life. Upon completion of a First-Aid Qualification, employers can be assured that they have highly-trained personnel capable of responding swiftly and effectively to any First-Aid needs. This fulfils legal obligations and contributes to a safer, more caring work environment for all. In essence, the First Aid Certification is more than just a qualification; it’s an investment in the health and safety of your workforce.

Develop your proficiency in hazardous waste management and logistics for upstream oil and gas with EnergyEdge's specialized course. Enroll now to advance your career.

This course is designed to provide operatives with thorough theory and practical training in the role of the piling rig attendant.

The one-day Emergency First Aid at Work qualification will teach you how to deal with emergency situations, administer general first aid treatment and is designed for people who wish to be appointed as a designated first aider in the workplace. The course is ideal for those that are required to hold a first aid qualification but don’t require the more comprehensive First Aid at Work qualification, and covers all the main workplace first aid situations you may need to deal with, including: managing an unresponsive casualty, CPR, choking, shock, bleeding and wounds, along with other minor injuries.

Legionella Responsible Person is suitable for any persons wanting to gain an understanding of Legionella and how to prevent or control the risk of exposure to Legionella bacteria.

The Health and Safety (First Aid) Regulations 1981 require all employers to make arrangements to ensure their employees receive immediate attention if they are injured or taken ill at work. This includes carrying out a risk assessment, appointing a suitable amount of first aiders and providing appropriate first aid training. However, having the correct first aid provision in the workplace is not just a legal requirement, it is incredibly important for the safety of all members of staff! The QA Level 3 Award in Emergency First Aid at Work (RQF) qualification is designed for individuals who wish to act as an emergency first aider in their workplace. Upon successful completion of this qualification, candidates will be equipped with the essential skills needed to give safe, prompt and effective first aid in emergency situations.  What’s more, as a regulated qualification, employers can book this course for their employees and rest assured that they have fulfilled their legal responsibilities for providing quality first aid training, without having to undertake any lengthy due diligence checks introduced in the recent HSE changes.  The Course will cover: - The roles and responsibilities of an emergency first aider Assessing an incident Managing an unresponsive casualty CPR and AED use Recovery Position Choking Seizures Shock Wounds and bleeding Minor injuries including; Cuts, grazes, bruises, minor burns and scalds For further details contact us on 01462 892 021

About this Training Course This course will provide a comprehensive, foundational content for a wide range of topics in power system operation and control. With the growing importance of grid integration of renewables and the interest in smart grid technologies, it is more important than ever to understand the fundamentals that underpin electrical power systems. Training Objectives Basic Terminology and Concepts of Electrical Systems: Gain an understanding of the basic terminology and concepts of electrical systems and the structure of a power system Transmission Line Parameters: Learn in detail all the transmission line parameters including line resistance, line inductance, transposition of transmission lines, and capacitance of transmission lines Insulators: Understand thoroughly all the various types of insulators, pin type insulators, suspension type or disc insulators, strain insulators, and testing of insulators High-Voltage Direct Current Transmission: Determine the advantages and disadvantages of high voltage direct current transmission, and gain an understanding of all the features of high-voltage direct current transmission Substations and Neutral Grounding: Gain a detailed understanding of all substation equipment, factors governing the layout of substations, station transformers, elements to be earthed in a substation, power system earthing, earthing transformers, bus bar arrangements and gas-insulated substations Distribution System: Learn about the effects of voltage on the conductor volume, distributor fed from one end, distributors fed from both ends at the same voltage, distributors fed from both ends at different voltages, and alternating current distribution Circuit Breakers: Learn about the classification of circuit breakers, plain-break oil circuit breakers, air break circuit breaker, air blast circuit breakers, vacuum circuit breakers, SF6 circuit breakers, rating and testing of circuit breakers Relaying and Protection: Learn all the requirements of relaying, zones of protection, primary and backup protection, classification of relays, electromagnetic relays, induction relays, feeder protection, phase fault protection, reactance relay, static overcurrent relay, differential protection, transformer protection, Buchholz relays, alternator protection restricted earth fault protection, rotor earth fault protection, and negative-sequence protection Economic Operation of Power Systems: Gain an understanding of steam power plants, heat rate characteristics and characteristics of hydro plants Load Frequency Control: Learn about speed governing mechanism, speed governor, steady state speed regulations and adjustment of governor characteristics Voltage and Reactive Power Control: Gain an understanding of impedance and reactive power, system voltage and reactive power, voltage regulation and power transfer Renewable Energy Sources: Learn about solar power, wind power, geothermal energy, biomass and tidal power Restructuring of Electrical Power Systems: Gain an understanding of smart grids, smart grid components, smart grid benefits, and open smart grid protocol Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals Course Level Basic or Foundation Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations