2503 Courses

A Health & Safety Executive Approved course that complies with First Aid Regulations 1981 and includes AED familiarisation. This Course is ideal for smaller work places for persons in a lower risk work environment. Who Should Attend? Any member of an organisation who would find themselves in charge, or who has been appointed to take charge of first aid during a first aid emergency in the absence of a qualified First Aider. Course Content • Health & Safety • AED Familiarisation • First Aid Kit • Resuscitation/CPR - Adult, Child, Baby • Recovery Position • Choking - Adult, Child, Baby • Burns & Scalds • Poisoning including Anaphylaxis • Epilepsy • Shock • Bleeding & Nose Bleeds • Asthma • Head Injuries • Breaks, Sprains & Strains • Specific Conditions (Heart Attack) Assessment / Certification Independent qualified assessors carry out the assessments. Each delegate that passes will receive a Certificate valid for Three years. Please note that training can take place upto 3 months in advance of the Certificate expiry date. The new Certificate will be dated from the expiry date of the old Certificate.

Bring along 2 pieces of furniture or boxes etc to restore which reflect your experience level & the skills that you would like to learn

The Powerboat Instructor course aims to provide candidates with the necessary skills and knowledge required to instruct the RYA National Powerboat Scheme in a safe and effective way. The course duration is 3 days and comprises both practical and theoretical training scenarios where candidates are expected to deliver short training sessions. These sessions aim to develop the candidates personal skills and teaching ability in the safety of the training environment. The course does focus on teaching you how to instruct. You will learn effective methods of instructing and coaching, how to debrief, and how to structure the courses. We do revise the skills you will need to teach, but you will need to be proficient on a power boat to do this course. All potential Powerboat Instructors are required to complete a 1 day pre-assessment course to assess your personal boat handling skills. This assessment must be completed within the 3 months prior to the commencement of your Powerboat Instructor course. Course Pre-Requisites To do this course you will need to have completed Pre-Assessment. You will also need the following certificates: Valid First Aid Certificate, RYA Powerboat Level 2, RYA VHF Short Range Certificate. You will need to have 5 years powerboating experiencing (or one season full time). The minimum age of this course is 16 years old. Ideally you will have a familiarity with a range of craft giving you a wide range of knowledge of powerboats. Your theory knowledge should be at RYA Day Skipper Theory level, and we would recommend holding the certificate. RYA Instructor Training At Torbay Sea School we have trained many RYA Instructors who have gone on to instruct with us, other RYA training centres or as freelance instructors. During the course of your general RYA training you will have gained all the skills necessary to sail, motor or power boat with confidence to a high standard. The following courses consolidate all those skills and give you the tools required to instruct others to gain their RYA qualifications. You will be able to utilise our Instructors experience and our boats/equipment to feel at ease with instructing others.

The one day one-to-one freestyle course is tailored to your requirements and I happy to discuss your requirements before booking. If you have a specific project in mind and that you need assistance with then I am happy to guide you through the processes involved.

Electric Vehicle Technicians have had access to certified training at different levels of competency for a number of years, but this has not been the case for Vehicle Dismantling Technicians until now. Vehicle repairers have been taught how to diagnose faults on Electric or Hybrid vehicles, make them safe, repair or replace the high voltage component and then put the vehicle back together and make them work. Vehicle dismantlers need to know how to assess Electric and Hybrid vehicles, store them properly, make them safe and dismantle them, store the parts and ship them out for re-use, repurposing or recycling, so the accredited and certified training for vehicle repair technicians met some of the criteria for dismantling but not all. Electric Vehicle Dismantling Training raises the professional standards of the vehicle dismantling and recycling industry, provides consistent training standards across the world, helps develop knowledge and understanding, enables team members to grow their own abilities, and achieve accredited training.

We supply Fire Marshal, Warden, Awareness training at your location and tailor it to your work sector, as such your staff will have no travelling or subsistence expenses minimising disruption for your organisation. Our trainer will bring all materials so you only need to provide a room with a plug socket. There is a practical element with extinguishers outside using our propane burners, which are fully insured and environmentally friendly. We require approximately 4 car parking spaces for this, if you do not have enough space we provide extinguisher discharge only.   The training is accredited by the Institute of Fire Safety Managers, all attendees will receive individual Electronic Certificates and our Fire Warden Quick Guide, in addition a Group Certificate will be sent with all names on for audit purposes and your central records.

HIGHLY SOUGHT-AFTER AND ALREADY AN EXTREMELY LUCRATIVE INDUSTRY, LASER TATTOO REMOVAL IS SET TO BE THE BIGGEST BEAUTY TREND OF 2023!

Enhance your knowledge with EnergyEdge's course on flow assurance for offshore production. Join our classroom training to gain valuable insights.

About this Virtual Instructor Led Training (VILT) The 5 half-day Piping Stress Engineering Virtual Instructor Led Training (VILT) course will systematically expose participants to: The theory and practice of piping stress engineering, with special reference to ASME B 31.1 and ASME B 31.3 Standards. The basic principles and theories of stress and strain and piping stress engineering, through a series of lessons, case study presentations, in-class examples, multiple-choice questions (MCQs) and mandatory exercises. Principal stresses and shear stresses which form the backbone of stress analysis of a material. Expressions for these quantities will be derived using vector algebra from fundamentals. Thermal stress-range, sustained and occasional stresses, code stress equations, allowable stresses, how to increase flexibility of a piping system, cold spring. The historical development of computational techniques from hand calculations in the 1950s to the present-day software. Training Objectives On completion of this VILT course, participants will be able to: Identify potential loads the piping systems and categorise the loads to primary and secondary. Determine stresses that develop in a pipe due to various types of loads and how to derive stress-load relationships, starting from scratch. Treat the primary and secondary stresses in piping system in line with the intent of ASME Standards B 31.1 and B 31.3 and understand how the two codes deal with flexibility of piping systems, concepts of self-springing and relaxation/shake down, displacement stress range and fatigue, what is meant by code compliance. Understand the principles of flexibility analysis, piping elements and their individual effects, flexibility factor, flexibility characteristic, bending of a curved beam and importance of virtual length of an elbow in the flexibility of a piping system. Learn stress intensification factors of bends, branch connections and flanges. Understand how the stresses in the material should be controlled for the safety of the piping system, the user and the environment. Examine how codes give guidance to determine allowable stresses, stress range reduction due to cyclic loading, and effects sustained loads have on fatigue life of piping. Confidently handle terminal forces and moments on equipment. Understand the supplementary engineering standards required to establish acceptance of the equipment terminal loads and what can be done when there are no engineering standard governing equipment terminal loads is available and learn the techniques of local stress analysis. Get a thorough understanding of the concepts and the rules established by the ASME B 31.1 and ASME B 31.3 Standards. Perform flange load analysis calculations based on Kellogg's Equivalent Pressure method & Nuclear Code method. Perform the same using a piping stress analysis software and check for flange stresses and leakage. Confidently undertake formal training of piping stress analysis using any commercial software, with a clear understanding of what happens within the software rather than a 'blind' software training and start the journey of becoming a specialist piping stress engineer.   Target Audience The VILT course is intended for: Recent mechanical engineering graduates who desire to get into the specialist discipline of Piping Stress Engineering. Junior mechanical, chemical, structural and project engineers in the industry who wish to understand the basics of Piping Stress Engineering. Engineers with some process plant experience who desire to progress into the much sought-after specialist disciplines of Piping Stress Engineering. Mechanical, process and structural engineers with some process plant experience who desire to upskill themselves with the knowledge in piping stress engineering and to become a Piping Stress Engineer. Any piping engineer with some pipe stressing experience in the industry who wish to understand the theory and practice of Piping Stress Engineering at a greater depth. A comprehensive set of course notes, practice exercises and multiple-choice questions (MCQs) are included. Participants will be given time to raise questions and participants will be assessed and graded based on responses to MCQs and mandatory exercises. A certificate will be issued to each participant and it will carry one of the three performance levels: Commendable, Merit or Satisfactory, depending on how the participant has performed in MCQs and mandatory exercises. Training Methods The VILT course will be delivered online in 5 half-day sessions comprising 4 hours per day, with 2 breaks of 10 minutes per day. Course Duration: 5 half-day sessions, 4 hours per session (20 hours in total). Trainer Your expert course leader is a fully qualified Chartered Professional Engineer with over 40 years of professional experience in Oil & Gas (onshore and offshore), Petrochemical and Mining industries in engineering, engineering/design management and quality technical management related to plant design and construction. At present, he is assisting a few Perth based oil & gas and mining companies in detail engineering, piping stress analysis, feasibility study and business development work related to plant design. He is a pioneer in piping stress engineering in Western Australia. His recent major accomplishments include the following roles and challenges: Quality Technical Support Manager of USD 54 billion (Gorgon LNG Project). This encompassed management of quality technical services connected with Welding, Welding Related Metallurgy, Non-Destructive Examination, Insulation /Refractory /Coating, AS2885 Pipelines Regulatory Compliance and Pressure Vessel Registration. Regional Piping Practice Lead and Lead Piping Engineer of Hatch Associates. In this role, he was responsible for providing discipline leadership to several mining projects for BHP Billiton (Ravensthorpe), ALCOA-Australia (Alumina), Maáden Saudi Arabia (Alumina), QSLIC China (Magnesium), COOEC China (O&G Gorgon). He was actively involved in the development of piping engineering practice in WA, including training and professional development of graduate, junior and senior engineers. This also includes the formation of the Piping Engineering Specialist Group. Lead Piping/Pipe Stress Engineer on ConocoPhillips' (COP) Bayu Undan Gas Recycle, Condensate production and processing platform. He was able to develop several novel design methodologies for the project and provided training to engineers on how to implement them. These methodologies were commended by COP and the underwriters of the project Lloyds Register of Shipping, UK. Creator of Piping Engineering Professional Course aimed at global engineering community. Professional Affiliations: Fellow, Institution of Mechanical Engineers, UK (IMechE) Fellow, Institution of Engineers, Australia (EA), National Register of Engineers (NER) Member American Society of Mechanical Engineers, USA (ASME) Honorary Life Member, Institution of Engineers, Sri Lanka (IESL)   POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

Learning how to create handmade fans for your eyelash extension sets. Suitable for:  Those who hold a classic lash extension certificate  Extra's: TIME: 10am - 3pm Models: Doll training head What's Covered: Introduction to Russian eyelash extensions Health & safety & hygiene How to create fans Check list Styles of lashes What effects lashes Pre/post treatment advice Equipment and products Consultation Application Removal Trouble shooting And so much more! Extra's Basic business start up support Social media tips Ongoing support Small Groups (Max 6)