248 Courses

The First Aid at Work training course, which conforms with HSE guidance, provides a comprehensive set of practical skills needed by first aiders in most workplaces, giving both the ability and knowledge to deal with first aid emergencies. It meets the standards required to help comply with Health and Safety (First aid) regulations. The comprehensive 1-day First aid at work course is ideal for those who need to be certified to be a first aider. The comprehensive 3-day First aid at work course is ideal for those who need to be certified to be a first aider in higher-risk working environments. First aiders are trained by a competent training provider in: • emergency first aid at work (EFAW) – at this level they're qualified to give emergency first aid to someone who is injured or becomes ill while at work • first aid at work (FAW) – qualified to EFAW level but can also apply first aid to a range of specific injuries and illnesses

This course provides participants with a comprehensive understanding of the requirements of the CDM Regulations 2015 and how these should be implemented in practice. The Regulations are put in context with other key health and safety legislation. The programme sets out clearly the roles and responsibilities of the principal duty holders and explores with the participants how these roles may vary on different types of project and procurement routes. The programme examines the content and appropriate level of information that should be included in the Pre-Construction Information and the Construction Phase Plan. The trainer will discuss best practice in implementing CDM through the new 2015 Regulations and Guidance. This course is essential for anyone who is involved in the procurement, planning, design or implementation of construction work. The course will provide you with: An overview of construction health and safety law, liability and enforcement A detailed understanding of the 2015 CDM Regulations and the part they play with other key legislation An explanation of the roles and responsibilities of all duty holders and the requirements for the CDM documentation Clear advice on current best practice for complying with the principles of the CDM Regulations and the changes introduced by the 2015 Regulations An understanding of how risk assessment should be applied practically throughout the design and how this responsibility is then transferred to contractors 1 Introduction Why manage health and safety? The costs of accidents Construction industry statistics Why CDM? Health and safety culture in the construction industry 2 Overview of health and safety law and liabilities Criminal and civil law Liability Enforcement and prosecution Compliance - how far do we go? Statutory duties 3 Health and safety law in construction Framework of relevant legislation Health and Safety at Work etc Act 1974 Management of Health and Safety at Work Regulations 1999 Construction (Design and Management) Regulations 2015 Who is responsible for the risks created by construction work? Shared workplaces/shared responsibilities Control of contractors - importance of contract law 4 Construction (Design and Management) Regulations 2015 Scope - What is construction? Application - When do they apply? The CDM Management System Duty holders (Client, Domestic Client, Designer, Principal Designer, Principal Contractor, Contractor) Documents (HSE Notification, Pre-Construction Information, Construction Phase Health & Safety Plan, H&S File) Management process The 2015 Guidance 5 Best practice - key issues in the CDM process The client and client management arrangements Competence and resource under CDM 2015 The role of the Principal Designer in practice Design risk assessment and the role of the Designer The CDM Documents (PCI, PCI Pack, Plan and File) Construction health, safety and welfare Making CDM work in practice 6 Questions, discussion and review

This course provides participants with a comprehensive understanding of the requirements of the CDM Regulations 2015 and how these should be implemented in practice. The Regulations are put in context with other key health and safety legislation. The programme sets out clearly the roles and responsibilities of the principal duty holders and explores with the participants how these roles may vary on different types of project and procurement routes. The programme examines the content and appropriate level of information that should be included in the Pre-Construction Information and the Construction Phase Plan. The trainer will discuss best practice in implementing CDM through the new 2015 Regulations and Guidance. This course is essential for anyone who is involved in the procurement, planning, design or implementation of construction work. The course will provide you with: An overview of construction health and safety law, liability and enforcement A detailed understanding of the 2015 CDM Regulations and the part they play with other key legislation An explanation of the roles and responsibilities of all duty holders and the requirements for the CDM documentation Clear advice on current best practice for complying with the principles of the CDM Regulations and the changes introduced by the 2015 Regulations An understanding of how risk assessment should be applied practically throughout the design and how this responsibility is then transferred to contractors 1 Introduction Why manage health and safety? The costs of accidents Construction industry statistics Why CDM? Health and safety culture in the construction industry 2 Overview of health and safety law and liabilities Criminal and civil law Liability Enforcement and prosecution Compliance - how far do we go? Statutory duties 3 Health and safety law in construction Framework of relevant legislation Health and Safety at Work etc Act 1974 Management of Health and Safety at Work Regulations 1999 Construction (Design and Management) Regulations 2015 Who is responsible for the risks created by construction work? Shared workplaces/shared responsibilities Control of contractors - importance of contract law 4 Construction (Design and Management) Regulations 2015 Scope - What is construction? Application - When do they apply? The CDM Management System Duty holders (Client, Domestic Client, Designer, Principal Designer, Principal Contractor, Contractor) Documents (HSE Notification, Pre-Construction Information, Construction Phase Health & Safety Plan, H&S File) Management process The 2015 Guidance 5 Best practice - key issues in the CDM process The client and client management arrangements Competence and resource under CDM 2015 The role of the Principal Designer in practice Design risk assessment and the role of the Designer The CDM Documents (PCI, PCI Pack, Plan and File) Construction health, safety and welfare Making CDM work in practice 6 Questions, discussion and review

The First Aid at Work training course, which conforms with HSE guidance, provides a comprehensive set of practical skills needed by first aiders in most workplaces, giving both the ability and knowledge to deal with first aid emergencies. It meets the standards required to help comply with Health and Safety (First aid) regulations. The comprehensive 1-day First aid at work course is ideal for those who need to be certified to be a first aider. First aiders are trained by a competent training provider in: • emergency first aid at work (EFAW) – at this level they're qualified to give emergency first aid to someone who is injured or becomes ill while at work

QA Level 2 Award In Fire Safety (RQF) Face to Face Classroom: Full day course Online / Virtual Classroom: 3 sessions of 2½ hours Suitable for Fire Wardens/Fire Marshals and all other members of staff Provides a foundation of fire safety knowledge on which employers and ‘responsible persons’ can build, keeping the business safe from fire Benefits of this course: How much do you know about keeping yourself and others safe in the workplace? Fire Safety Law breaches can result in unlimited fines and imprisonment More importantly, how would you feel if someone got injured or even killed by a fire you could have prevented? This course is for anyone who has a specific responsibility for fire safety in the workplace, such as designated fire wardens/fire marshals Successful candidates will gain an understanding of fire safety management at work and the specific roles and responsibilities related to fire safety in the workplace. Course Contents: Causes of Fire in the Workplace The Fire Triangle Hazards during and after a Fire Fire and Smoke Spread Identifying and Controlling Fire Hazards Fire Safety Laws Duties and Responsibilities of Employers and Employees Undertaking a Fire Safety Inspection Fire Safety Risk Assessments Contents of a Fire Safety Briefing Roles and Responsibilities of the Nominated Fire Warden Accredited, Ofqual regulated qualification: Our Fire Safety course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards.You can rest assured that the training your employees receive is of a high quality and the candidates will get a strong grounding in Fire Safety, helping to keep your staff and your business safe from fire.The Ofqual Register number for this course is 603/2756/X

QA Level 1 Award In Fire Safety Awareness (RQF) Face to Face: Half-day course Virtual Classroom: Spread over 2 sessions of 2½ hr duration This course is an ideal way to ensure that all employees have a good understanding of fire safety Candidates will learn basic fire safety principles in order to ensure they are keeping themselves and others in the workplace safe at all times Benefits of this course: Candidates will learn basic fire safety principles in order to ensure they are keeping themselves and others in the workplace safe at all times Candidates will also learn what to do in the event of an emergency and the simple measures that can be taken to control the risk of fires With subjects covered in just half a day, this course is an ideal way to ensure that all employees have a good understanding of fire safety, whilst minimising disruption to your organisation’s day to day activity This course is also good for those who just want to know a bit more about keeping themselves and loved ones safe from possible fires Course Contents: Causes of Fire in the Workplace The Costs of Fires in the Workplace for Employers, Employees and Society Basic Fire Safety Duties and Responsibilities Actions to be taken in the event of a Fire Principles of Fire Risk Control Safe Use of Portable Fire Fighting Equipment Fire Safety Equipment Checks Accredited, Ofqual regulated qualification: TOur Fire Safety Awareness course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards. This means that you can be rest assured that your Fire Safety Awareness Training is of high quality and is a very good way to make sure your employees have an Awareness in Fire Safety. The Ofqual Register number for this course is 603/2627/X

COURSES EVERY WEEK THROUGHOUT EVERY YEAR COURSE OVERVIEW. DURATION: 4 DAY (09:00 - 18:00) COST: £1500 PER PERSON LOCATION: HAMPSHIRE THIS 4 DAY HEFAT COURSE IS WITHOUT DOUBT THE HIGHEST LEVEL OF HOSTILE ENVIRONMENT TRAINING AVAILABLE Hostile Environment First Aid Training (HEFAT) has been designed for those operating or working in hostile or elevated risk environments who require an advanced level of medical training. The skills taught on the HEAT course are taken to the next level by training delegates how to deal with more complex levels of medical conditions and trauma first aid training coupled with practical training in the use of advanced medical equipment and techniques. In line with all of our benchmark courses HEFAT ensures that travellers from all backgrounds are prepared for the widest possible threat levels across the widest field of environments and situations. Delegates leave aware of potential risks and confident that they have the skills and knowledge to deal with immediate and developing situations. No previous training or qualifications are required to attend this course. Unsure if this is the right course for you? Get in touch with our team to help you choose the best course for your needs. COURSE ELEMENTS. THREAT RISK ASSESSMENT AND MITIGATION ADVANCED TRAUMA AND FIRST AID TRAINING KIDNAP AND HOSTAGE VEHICLE SAFETY AND SECURITY POST TRAUMATIC AND ENVIRONMENTAL STRESS LANDMINE AND IED’S NAVIGATION TECHNIQUES WEAPON FAMILIARISATION CONFLICT MANAGEMENT RADIO AND VOICE COMMUNICATION

COURSES EVERY WEEK THROUGHOUT EVERY YEAR COURSE OVERVIEW. DURATION: 3 DAY (09:00 - 18:00) COST: £1250 PER PERSON LOCATION: HAMPSHIRE OUR EVER POPULAR, CERTIFICATED AND ACCREDITED 3 DAY COURSE WAS DESIGNED FOR TRAVELLERS FROM ALL SECTORS, FROM MEDIA PROFESSIONALS, CHARITIES AND INTERNATIONAL NON GOVERNMENT ORGANISATIONS, FINANCIAL INSTITUTIONS TO OIL, GAS AND UTILITIES WORKERS, WHO FIND THEMSELVES WORKING IN UNFAMILIAR AND OFTEN HOSTILE LOCATIONS. No previous training or experience is required to attend this course, which has been structured to enable individuals and groups to transit to and work in a country or region whilst being aware of the inherent risks and dangers present and more importantly the steps that can be taken to avoid and deal with the situations they may be presented with. The focus at HET is to ensure that our delegates are able to get the job done, whilst having an appreciation for the risks and threats associated with travel to elevated risk environments, this ranges from bombings and vehicle related incidents to high risk kidnap situations. The remote medical training provided on the course is of high priority and provides the traveller with the knowledge and practical skills to save lives in remote locations.  Our highly experienced instructors are drawn from a range of backgrounds and ensure that the training delivered is extremely practical, current and most importantly relevant to ensure that the work gets done and everyone gets home safe. Unsure if this is the right course for you? Get in touch with our team to help you choose the best course for your needs. COURSE ELEMENTS. THREAT RISK ASSESSMENT AND MITIGATION FIRST AID TRAINING KIDNAP AND HOSTAGE VEHICLE SAFETY AND SECURITY LANDMINE AND IED’S WEAPON FAMILIARISATION NAVIGATION TECHNIQUES RADIO AND VOICE COMMUNICATIONS CONFLICT MANAGEMENT

Qualitative Face Fit Testing is a method for checking that a tight fitting facepiece matches an individual’s facial features and can provide an adequate seal to the wearer’s face. This Face Fit Train the Tester course will provide those who require it, the knowledge of how to conduct face fit testing using the Qualitative method. If you provide respiratory protective equipment (RPE) to your employees or are responsible for Health and Safety within your organisation, then it is essential that fit testing is carried out correctly and documentary evidence is recorded to demonstrate the RPE is suitable for the wearer and has passed a fit test. Please note: even though these training courses are referred to as "train the trainer" they are only to provide training to allow the attendees to conduct Qualitative face fit testing, not to enable them to teach the subject themselves. Aims The aim of the Face Fit Train the Tester course is to train people on how to conduct face fit testing so that they can carry out their own face fit tests to a high standard. Course Content • Background to Qualitative Face Fit Testing • Legislation and Guidance, HSE282/28 • Set-Up of Equipment • The Sensitivity Test • Fit Test Protocols • Pass Levels • Practical Face Fit Testing • Troubleshooting & Problem Solving • Fit Test Failures and Re-Tests • Planning & Managing a Fit Testing Program. Prerequisites None – The course is intended either as an introduction or as an update. Assessment Delegates will be required to complete a short multiple-choice test at the end of the training and will be assessed during the practical element of the training. Certificate This course is covered by certification and is valid for 3 years. Duration 2-3 Hours - dependent on class size Instructions Please note: Delegates are required to bring their own Face Fit Testing Kit and a suitable RPE Mask with them on the day of training. More information will be in your confirmation email. Directions Location Map

This workshop has been designed to help managers understand their responsibilities and what they need to do to ensure compliance with current workplace legislation - including the fire safety and CDM regulations. The day will cover the legal background - including an appreciation of how safety legislation has evolved and why; the logic behind recent developments and the implications for staff and employers; key areas of current legislation; roles and responsibilities in health and safety management, including monitoring contractors and suppliers effectively; implementing sound health and safety policies and procedures; getting staff on board, and implementing effective systems. Also, recognising potential risks and hazards and developing strategies to minimise their impact in the workplace. This course will give participants an understanding of: The broader context of the key areas of health and safety regulation which apply to your organisation Existing health and safety practice and guide them in how to shape and implement an effective health and safety policy What they should do and the procedures to support it Potential areas of risk in the workplace - and how to take action to minimise the threat to staff safety How sound health and safety processes can contribute to business performance 1 Understanding the workplace legislation Overview of health and safety and workplace legislation Compliance, the role of the facilities manager, and who is accountable? Breakout session to discuss where we are now and to highlight issues of concern Applying required policies and procedures Developing and implementation/review of the safety policy Communicating with users, clients and contractors Health and safety manual 'Selling' health and safety 2 Key legislation - a practical working guide Asbestos Regulations Construction (Design and Management) Regulations 2007 / 2015 Control of Substances Hazardous to Health (COSHH) Regulations Disability Discrimination Act (DDA) Display Screen Equipment (DSE) Regulations 1992 Electricity at Work Regulations 1989 Fire Precautions (Workplace ) Regulations 2006 Health and Safety (Consultation with Employees) Regulations 1996 Health and Safety (First Aid) Regulations 1981 Health and Safety at Work etc. Act 1974 Management of Health and Safety at Work Regulations 1992 Manual Handling Operations Regulations 1992 Portable Appliance Testing (PAT) Provision and Use of Work Equipment Regulations 1992 REACH - Registration, Evaluation, Authorisation and restriction of Chemicals Reporting of Injuries, Diseases, and Dangerous Occurrences Regulations (RIDDOR) 1995 Waste Electrical and Electronic Equipment (WEEE) Regulations 2006 Work Equipment Regulations 3 Controlling contractors Understanding the Regulations Selecting and assessing contractors Understanding and setting accountability Why a method statement? How to apply a permit to work system Safe systems of work Round-table discussion to bring out issues from participants' own experience 4 Risk assessment Understanding your hazards Identifying specialist areas How to undertake these assessments Implementation of sound systems and processes Syndicate exercise identifying where assessments are needed and carrying out assessments 5 Keeping the work environment safe Sick building syndrome and legionella Asbestos Waste management Pest control Provisions for first aid Accident reporting and investigation At-work driver safety Security 6 Fire safety Understanding the Regulatory Reform Fire Safety Order Fire certificates The fire risk assessment Testing fire-fighting equipment? Emergency procedures Workshop to examine the procedures for dealing with different types of emergencies 7 Ergonomics programme Ergonomics - important or irrelevant? Are you complying with HSE regulations? Furniture and equipment Display screen equipment assessments Homeworking - your concern or not? Syndicate exercise to review what to do when relocating or refurbishing an office 8 Inspecting and auditing Role of Health and Safety Executive Inspectors - 'be prepared' FM role Staff/trade union involvement Independent audits Records and reports Communicating the results 9 Action plan Participants to list actions they need to take after the course