118 Educators providing Courses

Name: Advanced Process Safety Engineering
Price: 3499 GBP
Availability: InStock

Chemical In Person

marshall assessment

Birmingham

End point assessments are the final tests given to an apprentice during their apprenticeship. The goal of this activity is to offer an impartial, objective review of individual skills, knowledge, and behaviours. Although the activities are different for each apprenticeship, end-point assessments follow the same general structures. The end-point assessment is performed after a minimum of 12 months after the start of the apprenticeship. It must be successfully completed before the issuance of an apprenticeship completion certificate. Every training provider delivering on Apprenticeship standards must have an agreement with an End Point Assessment Organisation (EPAO). Assessment Organisations must be registered on the Government approved register (RoEPAO). If you have apprentices in the life science, chemical science, physical science or in the science education sector, our fair and straight-forward EPA process provides a cost effective, quality-assured assessment solution for your business. Marshall Assessment has over 30 years’ experience of work based learning and assessment. We make the unfamiliar structures of end-point assessment easily navigable with comprehensive customer support and assessment resources. We have a broad range of occupational competence that spans most of the UK science sector. Our industry-competent assessors focus on precise communication, clear expectations, and rapid reporting of assessment decisions. Assessment activities depend on the apprenticeship under evaluation. Individuals might participate in professional discussions, complete skill-based challenges, or perform in situational judgement tests. Portfolios and practical observations are sometimes part of the process, as are presentations, showcases, and interviews. Each assessment activity works to evidence the knowledge, skills and behaviours that each learner has developed during their apprenticeship. This complete and careful evaluation of their skills, knowledge, and behaviours is an impartial, yet rigorous process that tests the candidates core ability to perform their job role effectively and safely. The unique benefit that the end-point assessment brings is its holistic design. People retain knowledge and learn new skills in unique ways. Instead of trying to fit each candidate into the same profile, this process looks at the competency of the individual from all facets. Assessment Plans Achieve Crucial Outcomes. Assessment plans are delivered by the training provider with guidance from the EPAO. This provides structure to the EPA and signposts our assessors to maximise our assessment opportunities. End point assessments remove managers being the sole decision-makers on the competencies of a candidate. Although, that change can be challenging for some, working with our team ensures that your assessment plan achieves the best possible outcome. Our assessment team are flexible and will rapidly understand the requirements of your business. We will partner with you to give your apprentices the best possible chance to shine and demonstrate their competencies. This partnership begins with initial assessment and progresses to EPA and beyond, as we will stay in touch with you regarding your apprentice’s progression. Now is the time to link up with your EPAO. Our future depends on the expertise that your apprentices demonstrate in the science sector. Together we are responsible for building a brighter, safer world through a highly trained and competent scientific workforce. Use the experience our team provides to help your organisation and the science sector to bounce forward.

Message

alchemilla apothecary

Saint Mawgan

Alchemilla is a modern herbal wellness clinic located on the beautiful Cornish coast. I offer high-quality products and services which celebrate plants and herbal traditions from around the world and across the ages. One of the main aims of the apothecary is to revive the role of the traditional herbalist, skilled in the preparation and dispensing of tried and trusted remedies. Just as we expect our food to be grown with love and care, so should we expect the same from our medicines and those who create them. “Where do your medicines come from?” I stock a range herbal tinctures, syrups and teas, all have been handpicked for their high-quality ingredients and environmentally friendly ethos. Products manufactured here in the apothecary carry the HerbMark logo which shows they have been created by a practitioner trained in the manufacture of herbal medicines. You can read more about HerbMark and what it means here, and visit the herb shop here. Alchemilla was created with the aim of protecting and sharing herbal knowledge so that it can be passed onto future generations. I’m a writer at heart, and thoroughly enjoy curating content to help encourage more people to rediscover the joy of herbs. I write widely about home medicine making skills in my newsletter, and have also written a number of articles which have been published in a variety of journals and magazines. I also offer online and in person herbal consultations. Click here to read more about my services or feel fee to send an email to sarah@alchemilla.co to book a “hello” call. WHAT QUALIFIES ME TO HELP YOU? I spent five years studying herbal medicine and naturopathic practice at the College of Naturopathic Medicine at Regent’s College London. During this time I researched and wrote about a wide range of topics which prepared me well for my service as an herbalist. This included: Phytochemistry (the chemical structure of plants and what effects these substances have on the human body) Ethnobotany – the scientific study of the traditional knowledge and customs of a people concerning plants and their medical, religious, and other uses Wild-crafting and gardening, growing plants from seed and learning to identify plants in the wild Formulation and preparation of botanical medicines. The intricate art of prescribing and preparing herbal medicines for use Iridology, Chinese tongue diagnosis, naturopathic cleansing, and holistic nutrition In addition to my studies, I also completed 500+ hours of clinical practice working in a variety of diverse herbal clinics and dispensaries across the UK. Every year, as part of my practice and commitment to my profession, I undergo additional professional training to ensure I’m always up to speed with any new developments in the herbal world. You can learn more about the standards of proficiency required to become a registered practitioner on the EHPTA (European Herbal & Traditional Medicine Practitioners Association) website. Find out more about the training required to become a practising herbalist here. “Alchemy – The act of changing a substance of little value into gold, or the elixir of life”

Message

compete high

London

Compete High: Your #1 Destination for Skill Development. Explore diverse range of courses to boost your expertise, outshine your competition, and fly high in your career.

Message

nextgen learning

London, United Kingdom

NextGen Learning offers futuristic learning tailored for emerging leaders. Dedicated to empowering learners, this platform boasts a vast array of courses, crafted by industry professionals, for both personal and professional growth. Dive into a transformative journey, unlocking unparalleled potential, and equipping yourself with qualification & skills designed to lead tomorrow's world.

Message

westlink tiling courses

Are you looking to retrain in your career or take up a new hobby? Courses.ie is a national database of training courses across Ireland. We list courses of all types from colleges and course providers around Ireland, from evening classes, postgraduate courses, 3rd level courses, corporate training courses, to distance learning courses. We list thousands of courses and programmes as well as publish weekly informative articles about every aspect of education in our articles library. Our goal is to help individuals and companies find relevant courses or providers for private and professional development training in Ireland. We firmly believe in the value of education and continuing personal and professional development. Through Courses.ie and the other websites in our network, we not only help course providers to promote their courses but also those seeking information about courses to easily find the right options for them. For every course we list, we present relevant information such as content, prices, start dates. Users are able to request more information from the course organiser as well as apply for the courses directly online. We list everything from Taekwon-Do classes to Postgraduate Courses in Computing.

Message

iomh - institute of mental health

London

The IOMH - Institute of Mental Health [https://iomh.co.uk/]is dedicated to empowering individuals to unlock their full potential and thrive in multiple areas of life. Whether you're seeking personal growth, professional development, or support in overcoming life's challenges, we have the resources and expertise to guide you on your transformative journey. Our Vision At the IOMH (Institute of Mental Health), we envision a world where every person is inspired to embrace change, overcome obstacles, motivate others, and find hope in the face of adversity. We believe that through education and support, individuals can tap into their inner strength and create meaningful transformations in all aspects of life. Our Mission Our mission is to break barriers and ignite the spark of possibility within you. We are committed to offering a diverse range of courses and programs that encompass various niches, allowing you to explore and excel in multiple areas of interest. Our skillfully crafted content, designed by specialists, provides you with the knowledge and skills you need to become a well-rounded and empowered individual. WHAT WE OFFER * Expert-Curated Courses: Our courses are developed by industry-leading experts. * Fully Accredited Courses and Study Materials: Ensure quality and credibility. * Business Team Training: Tailor-made programs for corporate teams. * Affordable Subscriptions: Flexible payment options to suit your budget. * Accredited Certifications: Validate your skills and expertise. * New Courses Monthly: Stay updated with the latest trends. * Flexible Learning: Learn at your own pace and convenience. * 24/7 Support: Dedicated assistance whenever you need it. OUR VISION AT THE IOMH (INSTITUTE OF MENTAL HEALTH), WE ENVISION A WORLD WHERE EVERY PERSON IS INSPIRED TO EMBRACE CHANGE, OVERCOME OBSTACLES, MOTIVATE OTHERS, AND FIND HOPE IN THE FACE OF ADVERSITY. WE BELIEVE THAT THROUGH EDUCATION AND SUPPORT, INDIVIDUALS CAN TAP INTO THEIR INNER STRENGTH AND CREATE MEANINGFUL TRANSFORMATIONS IN ALL ASPECTS OF LIFE. OUR VISION AT THE IOMH (INSTITUTE OF MENTAL HEALTH), WE ENVISION A WORLD WHERE EVERY PERSON IS INSPIRED TO EMBRACE CHANGE, OVERCOME OBSTACLES, MOTIVATE OTHERS, AND FIND HOPE IN THE FACE OF ADVERSITY. WE BELIEVE THAT THROUGH EDUCATION AND SUPPORT, INDIVIDUALS CAN TAP INTO THEIR INNER STRENGTH AND CREATE MEANINGFUL TRANSFORMATIONS IN ALL ASPECTS OF LIFE.

Message

compliance central

Luton

Compliance Central has received a lot of positive feedback from students all across the world. On our platform, we're committed to giving students the knowledge they need through online courses and giving them the chance to earn certifications that are renowned around the world. Get ready to start your own journey with us!

Message

moderntronics

Harrow,

In these terms and conditions (“Conditions”) the following expressions shall have the following meanings: “Business Day” means any day other than Saturday, Sunday or a public holiday. “Business Hours” means the hours detailed in Condition 32 below. “Contact Hours” means Monday to Friday (inclusive) from 07:00 hours to 17:00 hours but excluding bank holidays. “Contract” means any contract between MT and the Customer for the supply of Hardware and/or Software (with the associated Licence) and/or services which is subject to these Conditions. “Customer” means any person, firm or company who enters into a Contract with MT to which these Conditions apply. “Force Majeure” means any event outside the reasonable control of either Party affecting its ability to perform any of its obligations (other than as to payment) under these Conditions. “Goods” means all or any tangible or intangible goods or intellectual property including but not limited to Hardware and Software which are provided to a Customer in accordance with these Conditions. “Hardware” means any hardware provided by MT to the Customer. “MT” means MODERNTRONICS Ltd. or its servants and agents as the case may be. “Insolvency Event” means any one of the following in relation to the Customer: (i) a notice being issued to propose a resolution for winding up or dissolution, or such a resolution being passed; (ii) a petition for a winding up or an administration or bankruptcy order being presented, or such an order made; (iii)any steps being taken with a view to a voluntary arrangement or other assignment, composition or arrangement with all or any creditors or any moratorium, readjustment, rescheduling, forgiveness or deferral of all or any indebtedness; (iv) suspension of payments to all or any creditors and/or ceasing business; (v)an encumbrancer taking possession of all or any assets; (vi) an administrator or receiver being appointed over the Customer or all or any of its assets; (vii)any action anywhere similar or analogous to any of the foregoing; or MT reasonably believing that any of the foregoing is imminent. “Licence” has the meaning attributed to it in Condition 23 below. “Minimum Term” means the term set out in Condition 17 below. “Party” means MT or the Customer and “Parties” means both of them. “Response Time” means two Working Hours from an initial call to the hotline under Condition 26 or 28 below. “Seminar” means any seminar provided by MT. “Service Operator” has the meaning given to that term in Condition 28 below. “Site” means https://www.moderntronics.com and all subdomains including (but without limitation) “Software” means software or software updates or upgrades provided by MT and licensed to the Customer under Condition 23 below. “Training Sessions” means any training session provided by MT. “Working Hours” means the hours between 9:00 to 17:00 on any Business Day 2. Interpretation In these Conditions, the following rules apply: A person includes a natural person, corporate or unincorporated body (whether or not having separate legal personality). A reference to a Party includes its personal representatives, successors or permitted assigns. A reference to a statute or statutory provision is a reference to such statute or provision as amended or re-enacted. A reference to a statute or statutory provision includes any subordinate legislation made under that statute or statutory provision, as amended or re-enacted. Any phrase introduced by the terms including, include, in particular or any similar expression shall be construed as illustrative and shall not limit the sense of the words preceding those terms. A reference to writing or written includes faxes and e-mails. 3. General Information These Conditions apply when MT: sells and delivers Hardware; sells and delivers Licences; sells and delivers Software; or provides repairs or any other services to the Customer. They will also apply to other business transactions unless MT agrees that alternative special conditions apply. These Conditions apply to the exclusion of any other conditions that may be proposed by a Customer or implied by law (insofar as such exclusion is lawful). Part II Specific Provisions for the Use of the Online Shop Customers purchasing Goods from the Site, must read all Parts of these Conditions, which apply to them in full. 4. Consumers The Goods and services provided by MT are designed only for sale to and use by businesses in the course of their business activities. MT does not knowingly sell to any person dealing as a consumer or supply anything for personal use. 5. Customer’s Status By placing an order on the Site, the Customer warrants that he or she is: legally capable of entering into binding contracts and, where the Customer is an individual, that he or she is at least 18 years old; and is dealing in a business capacity and purchasing Goods and/or services for the purpose of his business and not for personal use. Part III General Conditions for the Provision of Goods and Services 6. Formation of Contract Quotations provided by MT to the Customer are not binding on MT. The Customer’s order constitutes an offer to MT to buy the Goods or services. All orders are subject to acceptance by MT. The offer will be deemed accepted, and a Contract formed, when MT sends the Customer confirmation that the Goods have been dispatched (“Dispatch Confirmation”) or, in the absence of a Dispatch Confirmation, when the Goods are delivered. The Contract will only relate to those Goods whose dispatch is confirmed to the Customer by a Dispatch Confirmation or if no Dispatch Confirmation is sent, those Goods which are actually dispatched. MT is not obliged to supply any Goods which may have been part of the Customer’s order until the dispatch of such Goods has been confirmed in a separate Dispatch Confirmation. Subject to Condition 17 below, an order for services will be deemed to have been accepted, and a Contract formed, when MT sends the Customer confirmation that the services ordered will be provided (“Service Confirmation”) or, in the absence of a Service Confirmation, when the services begin to be provided. Oral representations will only be binding upon MT if they are expressly confirmed in writing by MT to the Customer. 7. Price Unless MT expressly specifies prices to the Customer, MT’s current list of prices applicable at the time of the acknowledgement of order will apply. Unless otherwise agreed in writing, all prices are exclusive of value added tax, postage, freight, insurance, forwarding fees, installation and commissioning, travelling expenses and subsistence, which will be added as appropriate. MT will charge overtime for work outside of their normal Business Hours at up to 150% of the hourly rate from time to time applicable during Business Hours. Subject to Condition 16 below, prices are liable to change at any time, but changes will not affect orders in respect of which MT has already sent the Customer a Dispatch Confirmation or a Service Confirmation as the case may be. The Site contains a large number of products and it is always possible that, despite MT’s efforts, some of the products listed may be incorrectly priced. MT will normally verify prices as part of dispatch procedures so that, where a product’s correct price is less than our stated price, MT will charge the lower amount when dispatching the product to you. If a product’s correct price is higher than the price stated on our site, MT will normally, at our discretion, either contact you for instructions before dispatching the product, or reject your order and notify you of such rejection. MT is under no obligation to provide any Goods or services to the Customer at an incorrect (lower) price, even after MT has sent a Dispatch Confirmation or a Service Confirmation in relation to those Goods or services if such incorrect price could reasonably have been expected to be recognised by the Customer as an error. 8. Delivery and Availability The Customer’s order for Goods will be fulfilled by the delivery date in the Dispatch Confirmation or, if no delivery date is specified, then within 30 days of the date the Customer made his order (where such an order leads to a Contract). The period for delivery or performance of the Contract will normally commence on MT’s acknowledgement of the order. However, if the Customer is required to do anything before MT can effect delivery, MT will, as soon as practicable, notify the Customer accordingly. The time within which MT must deliver any Goods will run from the date on which MT receives notice from the Customer that it has duly complied with such notification from MT. Unless otherwise agreed in writing, any periods mentioned in the acknowledgement of order for services and Software development are based on a preliminary estimate of the required workload and therefore are approximate only. Time of delivery and performance is not of the essence. If MT fails to meet any delivery or performance dates set out in the acknowledgement of order and is solely responsible for such failure, the Customer may terminate the Contract but only after MT has been given an opportunity to rectify the situation and subsequently fails to meet the revised set of delivery or performance dates provided by MT to the Customer in writing. Unless MT has been deliberately or grossly negligent, all further claims of the Customer on the basis of the delay in performance are excluded. If MT cannot deliver or perform its obligations under the Contract due to Force Majeure or a failure of the Customer to cooperate or any other act, default or omission of the Customer, then MT will be entitled to perform its obligations under the Contract once the issue has been resolved, provided the issue occurred while MT was still allowed to deliver or perform and MT shall have no liability whatsoever for any delay or its failure to perform its obligations. 9. Agreed Performance Unless specified otherwise in writing, the agreed performance in respect of any repairs provided by MT, at the Customer’s request will be to adjust the relevant unit(s) to MT’s applicable standard specifications for that unit. Where the relevant unit(s) cannot be repaired to MT’s applicable standard specification due to the Customer limiting the repairs required or the time and money to be invested MT may exceed the Customer’s request if MT considers, at its sole discretion, that such additional repairs are reasonable and will ensure the proper functionality of the unit in question. The agreed performance levels for MT’s maintenance and care services are as set out in Conditions 26 and 28 below; for all other services the agreed performance levels will be as set out in the acknowledgement of order. 10. Refunds Where the Customer returns Goods (at the Customer’s cost) because he or she claims that the Goods are defective, MT will examine the returned Goods and will notify the Customer of its findings within a reasonable period of time. If MT (in its sole discretion) deems that the Goods are defective, MT may at its option repair, replace or provide a refund in respect of such defective Goods. MT will process any repair, replacement or refund as soon as practicable and, in the case of any refund, within 30 days of the day MT confirmed to the Customer that the Customer was entitled to the same. Such refunds will be made in full, including a refund of any delivery charges for sending the item to the Customer. 11. Import Duty If the Customer orders Goods for delivery outside the UK, they may be subject to import duties and taxes which are levied when the delivery reaches the specified destination. The Customer will be responsible for payment of any such import duties and taxes. Please note that MT has no control over these charges and cannot predict their amount. Customers should contact their local customs office for further information before placing an order. Customers must comply with all applicable laws and regulations of the country for which the Goods are destined. The Customer will indemnify and keep indemnified MT in respect of all costs, proceedings, losses and liabilities resulting from any breach by the Customer of any such laws. 12. Retention of Title to Property The Goods will be at the Customer’s risk from the time of delivery. Property in and title to all Goods will remain with MT until MT has received payment for the full price of all the Goods (and/or all other goods and/or services supplied by MT to the Customer under any other contract whatsoever).. The Customer may sell or use Goods in which title is retained during the course of their normal business, but may not give such Goods by way of pledge or pledge these Goods as security. Until the property in and title to the Goods passes to the Customer: the Customer shall keep the Goods properly stored, protected and insured and separate from all or any other goods whether belonging to MT, the Customer or any third party; MT shall be entitled at any time forthwith to revoke the Customer’s power to deal with the Goods; and such power shall automatically cease if an Insolvency Event shall occur in respect of the Customer; and the Customer shall not make any modification to the Goods, the Software or their packaging or alter, remove or tamper with any marks, numbers or other means of identification used on or in relation to the Goods. Upon termination of the Customer’s power to deal with the Goods, the Customer shall place the Goods at the disposal of MT and MT are hereby irrevocably authorised without the need for consent of any third party but using only such force as may be necessary, to enter upon any premises of the Customer or any third party for the purpose of removing the Goods. If third parties claim title to Goods with retained title, the Customer will inform MT without delay, will notify the person making the claim of MT’s title and will support MT in enforcing its rights, including taking all the necessary steps required to preserve MT’s rights, including commencing litigation at the Customer’s own expense. If the Customer breaches the Contract, e. g. by delaying payment, the Customer will be obliged to return the Goods with retained title if requested by MT, in return for which MT will not terminate the Contract. 13. Payment Where services, maintenance or care are provided on an ongoing basis, MT will invoice the Customer for these at the beginning of the billing period or as soon as reasonably practicable thereafter. The Customer will pay MT’s invoices in full within 30 days from the date of the relevant invoice. Depending on the scope of an order, payments for such services, maintenance or care are due either upon placement of the order by the Customer or upon partial delivery of the same of between 40 to 50% of their respective order value. BACS or cheque are the only methods of payment accepted. Invoices for Seminars and Training Sessions will be issued at the beginning of the respective session and payment is due immediately and without deduction. 14. Delay of Payment Where a Customer fails to pay an invoice by the due date, MT will be entitled to charge the Customer interest on all monies outstanding from the due date until the actual date of payment (both before and after judgment) at a rate of 8% above the base rate of the Bank of England calculated on a daily basis. 15. Setting-Off and Refusal of Payment The Customer cannot exercise any right of set-off in respect of amounts owed to or by MT. 16. Change of Pricing by MT for Ongoing Maintenance or Care MT may increase its prices for maintenance and services by giving the Customer written notice 2 months prior to the end of the Minimum Term. The Customer has 4 weeks from the date of receipt of the written notice from MT to object to the change. Where the Customer so objects, the Customer will be entitled to give notice to MT to terminate the Contract as of the date of the proposed price increase. 17. Automatic Extension of Contract Where services, maintenance or care are performed on an ongoing basis the Contract will come into effect upon acceptance by MT of the first order from the Customer for Software maintenance. The Contract will initially run until the date specified at “Minimum Service Duration” as set out in the “MT Service Product List” or until the expiry date where an expiry date is stipulated in the Contract (“Minimum Term”). Subject to one of the Parties serving written notice of termination on the other at least three months prior to the expiry of the Minimum Term, the Contract will be extended automatically. In the case of Software Licences supplied without a time limit, the Contract will extend until December 31st of the current year. The subsequent extension periods will begin on January 1st and end on December 31st of the respective year. In the case of Software Licences supplied with limited validity (e.g. a licence for 1-year) the extension is based on the terms and conditions set out in the description of the respective licence (e.g. extension by one further year). Unless otherwise agreed in writing, any extension to a Contract will be on the basis of MT’s current price list as at the date of such extension. 18. Delivery Obligations and Shipping The conditions for EXW (ex works) (MT’s premises or such other place referred to in the relevant order) as set out in the Incoterms 2010 apply to delivery of any Goods. Claims for any transport damages and any replacement of damaged Goods, remain with the Customer who is responsible for adhering to the mode and period for the filing of any claims with carriers, shippers and insurers. 19. Scope of Warranty (Material Deficiencies and Deficiencies in Title) MT warrants that the Hardware is free from defects in workmanship and material as at the time of transfer of risk; and warrants that the Software does not contain any flaws which void or substantially reduce its value or suitability for the usual or contracted purpose. Where MT is not the author of the Software, MT does not warrant that such Software will run without interruptions or errors, nor that MT will be capable of resolving all Software errors, nor that the Customer will be capable of achieving all of the functions included in the Software in all of the combinations chosen by the Customer, nor that these will meet the Customer’s requirements. MT will only warrant the quality and/or durability of Goods if it has expressly agreed in writing with the Customer that it will do so. The warranty period is 1 year. Where MT is the author of the Software such Software is subject to MT’s standard warranty. 20. Obligation to Inspect and Serve Notice of Defects The Customer must inspect the Goods upon delivery or repair and must notify MT in writing of any failure by MT to meet the specification within 7 days of delivery or repair or (where the failure was not apparent on reasonable inspection) within a reasonable time being no more than 1 month after discovery of the failure. Where the Customer fails to provide such notice MT will have no liability under its warranty. 21. Liability Subject only to Condition 21 d), MT shall not be liable to the Customer in contract, tort (including without limitation negligence) and/or breach of statutory duty for any loss or damage which the Customer may suffer by reason of any act, omission, neglect or default (including negligence) in the performance of the Contract by MT, its servants or agents, in a sum which is greater than GBP 200,000 per incident or series of connected incidents. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect loss of any kind resulting from these Conditions, its performance or any breach of its terms. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect economic loss of any kind including (but without limitation) loss of business opportunity, reputation, goodwill resulting from these Conditions, its performance or any breach of its conditions. Notwithstanding any other provision herein, nothing in these Conditions shall operate so as to limit or exclude MT’s non-excludable liability in respect of death or personal injury caused by the negligence of MT to exclude the application of Section 12 of the Sale of Goods Act 1979 and to exclude liability for fraudulent misrepresentation. MT’s liability for loss of data is limited to the effort required to restore the data from proper backups provided by the Customer. 22. Third Party Rights If any third party claims or takes action against the Customer, because Goods delivered by MT, or their use in accordance with the instructions provided by MT, purportedly violate their commercial rights or proprietary rights, then the Customer will inform MT of the same. MT agrees that they will assist the Customer in defending such claims. Where the claim is made to the Customer within 12 months of the date of delivery, MT will indemnify the Customer against claims provided that the Customer: appoints MT to defend the claims or to settle the dispute, and promptly notifies MT of any such claim, keeps the Customer informed of all information received and provides such reasonable assistance to MT as it shall reasonably require, does not defend the action itself without coordinating such defence with MT, and does not at any time admit liability or otherwise settle or compromise or attempt to settle or compromise the said claim or action except upon the express instruction of MT, the alleged breach of rights is not based on alteration of the delivered item used by the Customer, and does not use the item delivered by MT in conjunction with other items and/or in a fashion that breaches any such rights, in a situation where the use of the item as delivered by MT would not have breached the rights of the person who has filed the claim. MT may at any time and at its own expense acquire on behalf of the Customer the right to continue to use the Goods, to replace the Goods or alter them in such a fashion that the rights of others are no longer breached. If this is not possible, the Customer shall return or destroy the Goods if required to do so by MT who will reimburse the purchasing price for the Goods less depreciation. If the Customer refuses to do so, MT will no longer defend the claim or provide the Customer with any further support. The Customer has no further rights in case of disputes over proprietary rights with third parties and MT shall have no liability therefore unless MT could be blamed for acting deliberately or with gross negligence. Part IV Special Conditions for Delivery of Software 23. Conditions of Use for Delivered Software In the case of delivery of Software to the Customer, MT hereby grants the Customer a simple, non exclusive and non-transferable, licence to use the Software (“Licence”) . The validity of the Licence is not time limited, unless otherwise specified to the contrary in the terms and conditions of the Licence. MT, grants the Customer the use of such Software in the form of the object code and the user documentation with the use being restricted to one electronic data processing system at any one time and only for the tasks for which it is intended. Unless permitted by law, the Customer will not decompile the Software or perform reverse engineering. The Customer may duplicate the Software but only to the extent that this is required for the permitted use, and in order to allow it to perform data backup. Upon delivery of any Software, including updates and upgrades, the Customer will immediately produce a backup copy. MT may terminate the Licence granted to the Customer pursuant to this Condition 23 with immediate effect if the Customer is in breach of the conditions for the use of the Software for a period of 30 days from the date of a written notice of such a breach from MT or any third party. On termination of this Contract howsoever arising, the Customer will return to MT within 30 days all Software together with any related materials owned and licensed by MT and shall delete all copies and partial copies of the Software however stored within 7 days of service of the notice. Proof of such deletion must be provided to MT without delay. On receipt of prior written consent from MT, the Customer may retain a copy of the Software for the purposes of archiving. 24. Delivery of Software MT will only install the Software if this has been expressly agreed in writing between the Customer and MT. MT is able to provide telephone consultancy and support concerning questions relating to the application of the respective Software products as well as the solution of problems that may occur as provided for in Condition 26 below. 25. Prerequisites for Running the Delivered Software The proper running of Software systems supplied will only be guaranteed if the Hardware and operating system components used correspond to the reference systems of the respective manufacturer(s), as well as having been approved and certified. Unless otherwise agreed in the Contract, the Customer shall ensure that the provisions in this Condition 25 are complied with. Part VMaintenance and Care Application Software 26. Scope of Performance of MT Services for Application Software For the Software products, unless otherwise expressly agreed in writing, MT will provide the following services, denoted by Service Level “SW-Service STANDARD” and Service Level “SW-Service E-STANDARD”: Right to use Software and documentation updates: MT grants the Customer a non-transferable, non-exclusive Licence to use the Software and any documentation or updates. The right of use is not limited in validity, unless otherwise specified in the terms and conditions of the Licence. Software and documentation updates: MT will supply the Customer with the current version of the Software as specified in the Contract. This will be done as specified by the manufacturer of the Software. The documentation will be supplied in the form determined by the manufacturer of the Software. The installation of Software updates will be performed by suitably qualified personnel of the Customer. Alternatively for an additional charge, MT may install the Software updates on behalf of the Customer. Where the Customer has adapted the Software, the Customer will be liable for the additional cost of performing the same adaptation to the new version of the Software or alternatively the Customer may perform the necessary adaptation himself. Hotline (Service Level “SW-Service STANDARD” only) MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. E-mail Hotline (Service Level “SW-Service E-STANDARD” only) MT is able to provide e-mail consultancy and support in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours Wherever possible, qualified consultancy will be provided by MT within the Response Time. MT Hotline: E-mail: hotline@MT.com Internet: http://www.MT.com/customersupport Software error messages Where Software problems occur which MT is unable, for whatever reason, to resolve, the Customer may send a written error message to MT. The purpose of such an error message is to identify the error in the Software and enable the manufacturer to resolve the error. MT shall liaise with the manufacturer(s) of the Software products to resolve any Software errors as promptly as possible. Restoration of any data, regardless of the cause of the data loss, is not the responsibility of MT. 27. Obligation of the Customer to Co-operate Pre-conditions for the provision of the services by MT to the Customer are that the Customer has legally acquired the Software and holds a corresponding Licence to use it. In addition, the Software must be in the same condition that it was in when it was delivered. The services exclusively relate to the current release and delivered version of the Software. If earlier Software versions are used, a one-time update service which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Services will not be performed for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). If the operating system for the Hardware is not included in the Contract, the Customer must update the operating system to the most recent version (e. g. by purchasing updates) if this is required in order to use the new versions of the application Software. Hardware and Operating Systems 28. Scope of Performance of MT Maintenance and Care Services for Hardware and Operating System For Hardware products and the operating system, unless otherwise agreed in writing, MT will provide the following services, denoted by Service Level “HW-Service SPECIAL”: The scope of performance is briefly set out in the “Special Description” for each product listed in the attached “MT Service Product List”. The exact scope of performance will be determined in accordance with the attached description of performance issued by the respective MT service operator (“Service Operator” including but not limited to Hewlett-Packard, Fujitsu Siemens and Silicon Graphics). The following shall also apply: Hotline MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Hardware products and operating system, as well as the resolution, (in so far as it is reasonably practicable to do so) of any problems which may occur. This service will be performed by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. Where queries arise outside of the Contact Hours, the Customer should address such queries directly to MT’s Service Operator Response time for Hardware failures MT will use reasonable endeavours to solve a query within the Response Time. The Response Time shall be deemed to have been initiated either as soon as the customer service personnel arrives on the relevant site, or as soon as remote diagnosis is started, where either is required to resolve the problem. The appropriate Response Time will be determined in accordance with the attached description of performance issued by the respective MT Service Operator. 29. Services Not Included Unless otherwise agreed in writing, the following services will not be provided by MT to the Customer: a) Repair/re-acquisition of devices that have been damaged as a result of: incidents of war of any type civil wars, nuclear energy, deliberate action of the Customer (not of his subcontractors) b) Repair/re-acquisition that is required because of repair work or alterations of devices carried out by the Customer or any third party without the prior written consent of MT. c) Work required due to interface problems between MT’s devices and those of other manufacturers and suppliers. d) Customer service which is required because a product that is not covered under this Contract has caused an error. e) Customer service that has become necessary because devices have been used under adverse conditions (e.g. including contaminations and deviations from recommended room temperature and relative humidity) or in conjunction with accessories or (device-specific) consumables (e.g. including foreign disks, disk stacks, cassettes, printer paper and print heads of any type) (“Device Specific Consumables”) which do not meet the manufacturer’s specifications. f) Replacement of Device-Specific Consumables. g) Data backup. h) Calibration work that is not related to repair. 30. Restoration of Data/Programs The restoration of data and programs upon repair or replacement of a defective hard disk is limited to starting the copying program (Restore) used to restore the last full data backup. 31. Obligation of the Customer to Cooperate a) Hardware service Pre-conditions for the provision of Hardware services by MT are that the Hardware has been acquired legally and has been installed properly at the Customer’s site. In addition the Hardware affected must correspond to the current revision and be in proper condition when including in the Contract. These pre-conditions shall be met immediately after the expiry of the warranty period specified in the Contract. If the Hardware is included in the Contract at a later date, these pre-conditions must first be confirmed by a takeover inspection of the Hardware by MT, which will be independently invoiced and paid for by the Customer, and if required the pre-conditions will be achieved by MT undertaking the required repair work. b) Operating System Service Pre-conditions for the provision of operating system services are that the Customer has legally acquired the Software and has been granted the necessary corresponding Licence to use it. In addition the Software must be in the same condition as when it was delivered to the Customer. The services exclusively relate to the current release and version of the Software. If earlier Software versions are used, a one-time “Update Service” which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Operating System services will not be provided for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). Part VI Generally Applicable Conditions 32. Prices and Fees for Special Services The following items are not included in the payment for services under Conditions 26 and 28 above and will be invoiced separately in accordance with MT’s current price list: Services performed outside Working Hours on the express request of the Customer. Services to correct errors caused negligently by the Customer or by any unauthorised third party as a result of improper treatment, unsuitable operating media, unauthorised manipulations, Software manipulations, non-adherence to operating conditions or otherwise. ices required due to faulty handling, excessive vibration, chemical influence, excessive dust burden or non-adherence to the properties set forth in the unit specifications. Unreasonable wait times and delays in the performance of services which are caused by the Customer. Services to remedy failures caused by Force Majeure. 33. Backup of Customer Data Prior to the commencement of any service work undertaken by MT, the Customer will backup all data in such a way that it may easily be restored by MT in the event that it is lost in the service process. 34. Change of Installation/Application Site Where maintenance and care services are provided on an ongoing basis by MT, the Customer will immediately inform MT in writing of any change to the installation or application address. If such a change results in an increase in MT’s expenses. MT reserves the right to either increase the prices charged to recover the additional expense incurred or alternatively MT may serve notice on the Customer to terminate the Contract where the new address is outside United Kingdom. 35. Miscellaneous Service Conditions and Obligations of the Customer to Co-operate MT may appoint authorised third parties to provide services. The Customer may only transfer title to services to third parties with the prior written consent of MT. Where defective components or devices are replaced by MT, these will become the property of MT. Extension of the products included in the maintenance agreement may be included in this Contract with the consent of the Customer. On request, MT will offer to the Customer a corresponding extension of the Contract, provided maintenance for the respective product is available. Where MT has to perform any services, the Customer shall accurately and without delay provide MT with any/all information that is required to perform such services. The Customer will provide MT with the name of a competent and appropriately qualified contact person and will provide the name of an appropriate substitute in order for the Hardware and Software to be maintained. Any contact(s) will have participated in the respective Seminars and/or Training Sessions held from time to time by MT or alternatively will have acquired comparable knowledge. These contacts will be available to MT’s technicians on site or will have access to the MT’s hotline as applicable. Consumables and Auxiliaries (which shall include documentation, application programs, data, telephone lines for transmission of voice and data) are not included in the scope of performance and shall be provided by the Customer in the vicinity of the system, such consumables and auxiliaries will be provided during Working Hours or, with prior consultation, outside of these hours. Additionally, the Customer will provide to MT computing time and consumables as required. 36. Specifically Ordered Service Days If service days are ordered for call-off within a specified period, such orders are binding. The services will become due for payment once they have been performed or by the end of the defined time period at the latest. Specifically ordered service days to be called off within a defined time period, can still be called off during a time of three months beyond the expiry of such defined time period. Thereafter they are lost. The claim to payment is thereby unaffected. For users that register on our website (if any), we also store the personal information they provide in their user profile. All users can see, edit, or delete their personal information at any time (except they cannot change their username). Website administrators can also see and edit that information.

Message

1...10 11 12

Courses matching "Chemical"

Show all 121

Chemical Engineering for Non-Chemical Engineers

By EnergyEdge - Training for a Sustainable Energy Future

Enhance your knowledge of chemical engineering with EnergyEdge's course for non-chemical engineers. Enroll now to gain valuable insights.

Chemical Engineering for Non-Chemical Engineers

Delivered In-PersonFlexible Dates

£2,899 to £3,099

Chemical Skin Peels (ClinicCare) Training Course

By Cosmetic College

As the field of skin technology and products continues to evolve, skin peels have undergone a remarkable resurgence in popularity. These treatments, also known as "chemical" peels, harness the advancements in specialised products to exfoliate the skin and eliminate dead cells, providing remarkable results while ensuring client comfort. Our course will introduce you to a variety of natural acids, such as glycolic, lactic, and salicylic acid, which are used in modern skin peels. You'll learn the art of mixing peels and working with pre-mixed products, enabling you to customise treatments to address specific skincare concerns and conditions. Our comprehensive training will empower you to confidently combine various skin peels, enhancing the effectiveness of your existing facial treatments. By extending the efficacy of your services, you'll provide your clients with exceptional results and a rejuvenated complexion. Moreover, you'll gain a deep understanding of the science behind skin peels, allowing you to educate your clients on the benefits and guide them towards achieving their skincare goals. Join our Skin Peel Course and unlock the potential of these innovative treatments. With our expert guidance, you'll acquire the expertise and knowledge to become a trusted skincare professional. Course Entry Requirements: Minimum of 18 years Good command of English Previous skin and facial training are desirable; we suggest that learners new to the industry enrol on our facial and skincare course before enrolling on our ClinicCare skin peel course. Course Pre-Study/Practical & Length: This course is a combination of theory study, virtual lectures and onsite practical Course Agenda: All courses are intimate with four learners in class 2-1 ratio. Areas covered within this course are: Anatomy and Physiology of the Skin Infection control Sharps and hazardous waste Pre-study chemical peel theory Practical training 1 model Professional live demonstrations Clinical setup Acids covered in this course: Glycolic acid Kojic acid Lactic acid Enzyme peels Mandelic acid Arbutin Phytic Acid Salicylic acid Equipment / Starter Kits A professional starter kit can be purchased with this course. The kit costs 200 and is an additional cost to the training fees. Key Information A very popular treatment that is growing in popularity. Quick appointments. Minimal downtime which produces quality results. We gear the training around the use of the Clinicare brand which is well-known, reputable and produces effective results. Training in chemical skin peels is the first step for many beauty therapists to become aestheticians. 8 types of chemical peels are covered in this training course, providing you with the knowledge and skills to help clients with a wide range of skin concerns. The course offers hands-on practical training in a small group setting, allowing for personalised instruction and support from the instructor. The course covers a comprehensive curriculum, including the theory behind chemical peels and their various types, as well as practical application techniques. Upon completion, participants will receive a certificate of achievement that demonstrates their newfound knowledge and skills. The use of the Clinicare brand in the training program ensures that participants are learning with products that are highly effective and widely recognised in the beauty industry. The combination of e-learning and practical training provides participants with a well-rounded educational experience, allowing them to build their knowledge and confidence in a convenient and flexible manner. Chemical skin peels are in high demand, making this training program a valuable investment for anyone looking to expand their skills and grow their business. The course is accredited by ABT & CPD, providing participants with the assurance that the training is of high quality and meets industry standards. Course Benefits Benefits for Students Expertise in Skin Rejuvenation: By completing this training course, you will gain in-depth knowledge of chemical skin peels and their application. You will learn various peel types, their effects on the skin, and how to select the appropriate peel for different skin concerns. This expertise will enable you to provide effective treatments and achieve remarkable results for your clients. Versatility in Treating Skin Concerns: Chemical skin peels can address a wide range of skin concerns, including acne, hyperpigmentation, fine lines, and uneven skin texture. By enrolling in this course, you will acquire the skills to tailor treatments to meet individual client needs, helping them achieve healthier, smoother, and more radiant skin. Advanced Techniques and Safety: Our training course focuses on the latest techniques and safety protocols in performing chemical skin peels. You will learn about skin assessment, pre-treatment preparation, peel application methods, post-treatment care, and potential complications. This knowledge will ensure the safety of your clients and enhance your professional credibility. Practical Hands-on Experience: Practical training is an essential component of our course. You will have the opportunity to practice chemical skin peel techniques on models under the guidance of experienced instructors. This hands-on experience will boost your confidence and proficiency in performing the treatments. Benefits for Clients Personalised Treatment Plans: With your comprehensive understanding of chemical skin peels, you will be able to assess clients' skin concerns and develop customised treatment plans. This tailored approach will address their specific needs, leading to more effective and satisfactory results. Improved Skin Texture and Appearance: Chemical skin peels can significantly improve skin texture, reduce hyperpigmentation, diminish acne scars, and minimise the appearance of fine lines and wrinkles. Your expertise in performing these treatments will help clients achieve smoother, clearer, and more youthful-looking skin. Confidence and Trust: Clients will have confidence in your abilities as a trained professional in chemical skin peels. Your knowledge of different peel types and their effects, along with your commitment to safety, will build trust and assurance in your clients, creating a positive treatment experience. Earning Potential Your earning potential can increase after completing the Chemical Skin Peels (ClinicCare) Training Course: Expanded Service Offerings: With expertise in chemical skin peels, you can expand your service menu and offer a popular and in-demand treatment. This diversification can attract new clients and increase your earning potential. Client Retention and Referrals: Satisfied clients who experience positive results from chemical skin peels are more likely to become repeat customers. Additionally, they may refer friends, family, and colleagues to your practice, further growing your client base and increasing your revenue. Professional Advancement: By enhancing your skills and knowledge in chemical skin peels, you position yourself as a knowledgeable and sought-after aesthetics professional. This can lead to opportunities for career advancement, such as working in prestigious clinics, and spas, or establishing your own practice, which can contribute to higher earning potential. Frequently Asked Questions Is this training course suitable for beginners or those with prior experience? Our Chemical Skin Peels (ClinicCare) Training Course is designed for both beginners and experienced professionals in the aesthetics industry. Whether you are just starting your career or looking to enhance your skills, this course will provide you with the necessary knowledge and techniques. What will I learn in this training course? In this course, you will learn about different types of chemical skin peels, their indications, and the process of performing the treatment. You will gain a comprehensive understanding of skin anatomy, product selection, client assessment, treatment planning, application techniques, and post-treatment care. Will I receive hands-on training during the course? Yes, hands-on training is an integral part of our Chemical Skin Peels (ClinicCare) Training Course. You will have the opportunity to practice the techniques on models under the guidance and supervision of our experienced instructors. This practical experience will help you develop confidence and proficiency in performing chemical skin peels. What products or brands will be used in the training course? Our training course focuses on ClinicCare chemical skin peels. ClinicCare is a renowned brand known for its high-quality and effective skincare products. You will learn about their specific range of peels and gain hands-on experience in working with these products. Will I receive a certification upon completion of the course? Yes, upon successfully completing our Chemical Skin Peels (ClinicCare) Training Course, you will receive a certification of completion. This certification validates your training and demonstrates your competence in performing chemical skin peels using ClinicCare products. Are there any post-training support or resources available? Yes, we provide post-training support to our students. Our instructors are available to answer any questions or provide guidance even after you complete the course. Additionally, you will have access to resources and materials that can further enhance your knowledge and skills in chemical skin peels. Can I incorporate chemical skin peels into my existing practice? Absolutely! Chemical skin peels are a popular and effective treatment for various skin concerns. Upon completing the course, you will be equipped with the skills to incorporate chemical skin peels into your existing practice or start offering this service to your clients.

Chemical Skin Peels (ClinicCare) Training Course

Delivered In-PersonFlexible Dates

£450

VTCT Level 4 Chemical Skin Peel Training

By Cosmetic College

Chemical peels are one of the most popular aesthetic treatments, offering a wide range of benefits for clients with various skin concerns. By enrolling in the VTCT (ITEC) Level 4 Certificate in Skin Peeling, you will be taking a significant step towards becoming a highly skilled and sought-after professional in the aesthetics industry. This advanced qualification is designed to provide you with the knowledge and expertise to perform skin peeling treatments safely and effectively, using a range of chemicals that are specifically chosen to suit different skin types and conditions. By learning the science behind the procedure, you will gain a comprehensive understanding of how chemical peels work and how they can improve the appearance of skin. With this knowledge, you will be able to confidently provide consultations and recommend the most appropriate treatments to your clients. This is especially important as chemical peels can be tailored to suit different skin concerns, including acne, fine lines, wrinkles, hyperpigmentation, and more. Moreover, this course is unique in that it uses industry leading products for training, which are widely recognised as industry-leading skincare brands. As such, you will gain experience working with high-quality products that are widely used in professional settings such as laser skin clinics and Medispas. By completing this course, you will acquire a wealth of skills, including client consultation, treatment planning, application techniques, and post-treatment advice. You will also learn the necessary health and safety protocols for performing chemical peels, including preparing the working area, sterilising equipment, and disposing of materials correctly. Ultimately, this course will equip you with the skills, knowledge, and confidence to provide chemical peels safely and professionally, setting you on a path towards a highly rewarding and lucrative career in the aesthetics industry.

VTCT Level 4 Chemical Skin Peel Training

Delivered In-PersonFlexible Dates

£1,350

Level 4 Chemical Peels

5.0(101)

By Elixskin & Elixir Skin Training

The Level 4 Chemical Skin Peels Qualification has been developed as a result of a move towards regulating non-medical aesthetic therapies to ensure practitioner knowledge, client care and safety is at the forefront of all advanced non-medical aesthetic treatments offered by therapists. You will also achieve Level 4 Award In Facial Anatomy & Physiology at no extra cost. Full details can be found here Please confirm dates and availability with us prior to purchasing Who Is This Course Suitable For? Learners must have previously completed and achieved a relevant Level 3 qualification. You must also have an anatomy and physiology qualification at a minimum of Level 4 which is combined with this course with NO EXTRA COST Course Content You will cover; Understanding chemical skin peeling treatments Be able to plan for chemical skin peeling treatments Be able to carry out chemical skin peeling using Beta Hydroxy Acids BHAs, Alpha Hydroxy Acids AHAs safely on all Fitzpatrick skin types Understand facial anatomy and physiology Understand associated pathologies Understand skin disorders, injuries and conditions A full start up equipment kit will be available to purchase on training. Details will be provided upon booking. Course Duration & Cost You will be required to do home study of treatment theory as well as assignments before you attend the practical training. This will allow more time to work on models and get hands on experience. You will be required to be in the centre for 1-2 practical days (depending on your experience) £999 Why Choose Us? This course will allow you to offer the most on trend and in demand treatments that are results driven. The key to a successful business is to offer services that clients will want to keep coming back for. All of the treatments within this diploma have proven results which will support you in customer retention. We do not offer online courses for treatments that require the skill that can only be performed in front an experienced trainer. We ensure we offer a practical course that allows you to work on 2 models per treatment. We want you to be confident in the skill so you can start your business straight away. We are not an Academy and we take pride in this. This means we offer more than just training you in a skill. We understand how difficult and overwhelming it can be to start a new business and our ethos is to provide guidance and support to get you started. All our sessions have an option of 1-2-1 sessions for a personalised experience and have a maximum of 4 students per session. Your journey with us doesn’t end in the practical training session. When you train with Elixir Skin Training you become a part of our brand. We stay in touch with all our graduates and provide that motivation to get you going, which you will not find in large Academies. Quality of training is important but so is what comes after- we support you in every aspect because we want to see you build your business. Categories: Advanced Skin Care Courses, ofqual, Training

Delivered In-Person in LeicesterFlexible Dates

£999

Process Safety Management & Engineering Applications [IChemE Approved Training Course]

By EnergyEdge - Training for a Sustainable Energy Future

Gain expertise in process safety management engineering through EnergyEdge's course. Participate in our classroom training to enhance your skills and knowledge.

Process Safety Management & Engineering Applications
[IChemE Approved Training Course]

Delivered In-PersonFlexible Dates

£3,099 to £3,199

Advanced Process Safety Engineering

By EnergyEdge - Training for a Sustainable Energy Future

Enhance your knowledge in process safety engineering with EnergyEdge's advanced classroom training course. Register now to secure your spot!

Delivered In-PersonFlexible Dates

£3,099 to £3,199

Chemical Peel Diploma

5.0(101)

By Elixskin & Elixir Skin Training

Skin peels also known as chemical peels, primarily work by exfoliating the skin and removing dead skin cells. Many different types of acid are used in this treatment. Most skin peels today are superficial in nature and therefore no skin peeling is actually observed. Please confirm dates and availability with us prior to purchasing Why Train In Chemical Peels? Treats active acne Treats hyperpigmentation Treats ageing skin Other treatments such as microneedling, microdermabrasion, dermaplaning etc can not be performed on active acne so this is the first treatment stage to work with skin. Clinicare Peels used for training that are also suitable for darker skin types. You can charge £60-£80- per session (depending on your location) Who Is This Course Suitable For? Those who have NVQ Level 2/3 Beauty. If you do not have any experience then you can do our VTCT Level 2 Facial Massage & Skin Care Course Content Theory: Skin anatomy & physiology Indications for use – including areas of treatments Differences in peel solutions and appropriate selection to suit the client Effectiveness of treatment – including depth and post treatment skincare Handling adverse reactions Appropriate combining of further treatment options Carrying out a Consultation: Client selection – including client medical history, drugs, and supplements list Skin analysis and pre-treatment considerations Contraindications and cautions to treatment Consenting clients Demonstration and practice session: Client preparation for treatment – including use of topical anaesthesia Importance of describing the sensation of treatment to clients Effective treatment techniques Health and safety management: including choice of equipment, safe handling of chemicals, and equipment management Number and frequency of treatments Use of homecare products Treatment records: Maintaining client records Post treatment advice Importance of treatment insurance Course Duration & Cost Home study with one day practical- 2.5 hours intensive Chemical Peel £200 Why Choose Us? This course will allow you to offer the most on trend and in demand treatments that are results driven. The key to a successful business is to offer services that clients will want to keep coming back for. All of the treatments within this diploma have proven results which will support you in customer retention. We do not offer online courses for treatments that require the skill that can only be performed in front an experienced trainer. We ensure we offer a practical course that allows you to work on 2 models per treatment. We want you to be confident in the skill so you can start your business straight away. We are not an Academy and we take pride in this. This means we offer more than just training you in a skill. We understand how difficult and overwhelming it can be to start a new business and our ethos is to provide guidance and support to get you started. All our sessions have an option of 1-2-1 sessions for a personalised experience and have a maximum of 4 students per session. Your journey with us doesn’t end in the practical training session. When you train with Elixir Skin Training you become a part of our brand. We stay in touch with all our graduates and provide that motivation to get you going, which you will not find in large Academies. Quality of training is important but so is what comes after- we support you in every aspect because we want to see you build your business. Categories: Advanced Skin Care Courses

Delivered In-Person in LeicesterFlexible Dates

£200

Process Safety Management & Engineering Applications

By EnergyEdge - Training for a Sustainable Energy Future

About this Training Course This 5 full-day course covers all the main elements of IChemE's Process Safety Competency framework: culture, knowledge and competence, engineering and design, human factors, systems and procedures, and assurance. Participants will achieve at least the second level of competence 'Basic Application', which is defined as 'Performs fundamental and routine tasks. Requires occasional supervision. Increased functional expertise and ability. Works with others.' This course examines the interrelation of the various techniques of process safety for analysing and managing process hazards in the hydrocarbon and chemical processing industries. There is a particular emphasis on engineering design aspects with extensive participation in individual and group exercises, tutored exercises and video case studies throughout the course to underpin key learning points. The learning is consolidated in a comprehensive case study and requires collaboration between members of each syndicate. This course has been reviewed and approved by the Institution of Chemical Engineers. IChemE is the global professional membership organisation for chemical, biochemical and process engineers and other professionals involved in the chemical, process and bioprocess industries. Their knowledge of professional standards, close involvement with industry, education and regulators, and their expertise as a leading global training provider, means they are uniquely positioned to independently assess and approve training courses and professional development programmes across the world. Training Objectives By the end of this course, participants will be able to: Acquire the underpinning knowledge required to achieve process safety competency Gain a comprehensive understanding of process safety management Understand the concept of the safety life cycle of a process plant from conceptual design onwards including operation, maintenance and modification Understand the hazard scenarios associated with a process plant Understand how risks can be controlled by hardware and procedural measures Identify and analyse hazard causes and consequences Recognise when specialist analytical expertise is required Generate effective and appropriate measures to reduce risks Justify and communicate practical solutions to non-technical personnel Explain the rationale for process safety measures to decision makers Target Audience This course is suitable for process industry professionals who need to acquire a comprehensive understanding of process safety management, those moving into process safety positions or those who wish to broaden their process safety knowledge within their existing discipline. It is particularly suited for anyone involved in the design, operation, modification or maintenance of a major hazard installation. This includes: Supervisors, operators and maintainers in Oil & Gas, Petrochemical and Chemical industries, process, mechanical and chemical engineers and technicians Design engineers, project engineers and HSE managers Control, automation and instrumentation engineers It will also demonstrate a substantial understanding of process safety for those engaged in Continuous Professional Development or aiming for the Chartered Engineer status. Course Level Basic or Foundation Trainer Your expert course leader has 50 years' experience in chemical and process safety engineering. His early career included 20 years in design and project engineering with various fine chemical and pharmaceutical companies where he designed chemical processes, specified plant equipment and selected materials for highly corrosive and toxic processes, often where textbook data was not available. This was followed by 10 years in offshore oil and gas design projects where he was responsible for setting up a Technical Safety group to change design safety practices in the aftermath of the 1988 Piper Alpha disaster. In recent years, he has been called upon to conduct various offshore and onshore incident investigations. His career has given him experience in project engineering, project management, process design and operations, safety engineering and risk management. He is a Fellow of the UK Institution of Chemical Engineers. He served on the Scottish Branch committee, and was elected chairman for a two-year term in 1991. He has also been chairman of the Safety and Reliability Society - North of Scotland Branch. He has delivered training courses in Process Hazard Analysis (HAZOP and HAZID), Process Safety Management, Hazard Awareness, Risk Assessment, Root Cause Analysis, Failure Modes & Effect Analysis and has lectured on Reliability Analysis to the M.Sc. course in Process Safety and Loss Prevention at Sheffield University. In addition to delivering training courses, he currently facilitates HAZOP / HAZID / LOPA studies and undertakes expert witness roles advising lawyers engaged in contractual disputes, usually involving the design or construction of chemical plants or Oil & Gas production facilities, or criminal prosecutions. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Process Safety Management & Engineering Applications

Delivered in Internationally or OnlineFlexible Dates

£3,095 to £3,599

Process Hazard Assessment using the HAZOP Technique and HAZOP Team Leader Training

By EnergyEdge - Training for a Sustainable Energy Future

About this Training Course Process Hazard Assessment using the HAZOP Technique is an intensely participative course that will both explain the key facets of the HAZOP technique as well as provide ample opportunities for participants to practice and become familiar with the technique using generic and real-life examples. HAZOP Team Leader Training is an intensely participative course that will develop participants already familiar with the HAZOP technique, the skills, knowledge and attributes of a HAZOP Team Leader. An in-depth syndicate exercise will provide the opportunity to lead a HAZOP team (consisting of other participants) and to be observed performing the role for constructive feedback. This 5 full-day course has been reviewed and approved by the Institution of Chemical Engineers (IChemE). IChemE is the global professional membership organisation for chemical, biochemical and process engineers and other professionals involved in the chemical, process and bioprocess industries. Their knowledge of professional standards, close involvement with industry, education and regulators, and their expertise as a leading global training provider, means they are uniquely positioned to independently assess and approve training courses and professional development programmes across the world. Training Objectives Process Hazard Assessment using the HAZOP Technique By the end of this course, participants will be able to: Understand the basic HAZOP Technique Fulfill roles as competent HAZOP Team Members Understand the role of HAZOP in risk management Understand how Hazard Identification can predict accidents and incidents Understand how HAZOP complements other hazard identification tool HAZOP Team Leader Training By the end of this course, participants will be able to: Understand the role of the HAZOP Team Leader Practise the role in a classroom environment Provide feedback to participants on their performance as HAZOP Team Leaders Appreciate the leadership skills required as HAZOP Team Leader Plan, organise, manage and successfully undertake a Hazard and Operability study Target Audience This course will benefit: All key persons in the organisation, who by their discipline and/or position, are likely to be called on to initiate, participate or review a HAZOP study. All who have responsibility for the management and supervision of process & safety including but not limited to Senior Management, Plant Managers, Process and Maintenance Engineers (all disciplines), Line Supervisors, Team Leaders, Safety Specialists, and Process Training Instructors. Course Level Basic or Foundation Trainer Your expert course leader has 50 years' experience in chemical and process safety engineering. His early career included 20 years in design and project engineering with various fine chemical and pharmaceutical companies where he designed chemical processes, specified plant equipment and selected materials for highly corrosive and toxic processes, often where textbook data was not available. This was followed by 10 years in offshore oil and gas design projects where he was responsible for setting up a Technical Safety group to change design safety practices in the aftermath of the 1988 Piper Alpha disaster. In recent years, he has been called upon to conduct various offshore and onshore incident investigations. His career has given him experience in project engineering, project management, process design and operations, safety engineering and risk management. He is a Fellow of the UK Institution of Chemical Engineers. He served on the Scottish Branch committee, and was elected chairman for a two-year term in 1991. He has also been chairman of the Safety and Reliability Society - North of Scotland Branch. He has delivered training courses in Process Hazard Analysis (HAZOP and HAZID), Process Safety Management, Hazard Awareness, Risk Assessment, Root Cause Analysis, Failure Modes & Effect Analysis and has lectured on Reliability Analysis to the M.Sc. course in Process Safety and Loss Prevention at Sheffield University. In addition to delivering training courses, he currently facilitates HAZOP / HAZID / LOPA studies and undertakes expert witness roles advising lawyers engaged in contractual disputes, usually involving the design or construction of chemical plants or Oil & Gas production facilities, or criminal prosecutions. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Process Hazard Assessment using the HAZOP Technique and HAZOP Team Leader Training

Delivered in Internationally or OnlineFlexible Dates

£3,095 to £3,599

Advanced Process Safety Engineering

By EnergyEdge - Training for a Sustainable Energy Future

About this Training Course Managing process hazards in the hydrocarbon and chemical processing industries is a critical function that requires relevant knowledge and skills due to the risks involved. The Advanced Process Safety Engineering course will discuss the interrelation of the various techniques of process safety for analysing, with a particular emphasis on engineering design aspects, as well as how to manage process hazards in a safe and effective way and how they can potentially be avoided. In this 3 full-day advanced level course, the expert course leader will provide participants with insights and examples from his career and experience to show how their learning should be applied in real-life situations. Feedback and questioning is highly encouraged. Reference material and reports can be provided to give more information on any particular topic of interest. Individual and group exercises, tutored exercises and video case studies will be provided throughout the course to underpin the key learning points. Training Objectives Upon completion of this course, participants will acquire in-depth knowledge of: Risk management and 'As Low as Reasonably Practicable' (ALARP) principles. Different aspects of process design that influence process safety. Approach to 'inherently safer' design. Defence in depth using 'layers of protection'. Process for ensuring the technical integrity of safety-critical equipment. Hazards associated with process materials. Range of hazard identification and consequence modelling techniques. Causes and mitigation of human error. Reliability and availability of safety-critical protection equipment. Role of engineered safety-critical equipment and systems. Target Audience This course is suitable for industry professionals who need to acquire a comprehensive understanding of process safety. This includes those who are required to make managerial decisions where process safety is a key consideration, those who are moving into process safety positions or those who wish to broaden their process safety knowledge within their existing discipline. It is particularly suited for anyone involved in the design, operation, modification or maintenance of a major hazard installation, and will demonstrate a substantial understanding of process safety for those engaged in Continuous Professional Development or aiming for Chartered Engineer status. This course will benefit professionals such as: Operations and maintenance supervisors Process, mechanical and chemical engineers and technicians Design engineers, project engineers and HSE managers Control, automation and instrumentation engineers Course Level Advanced Trainer Your expert course leader has 50 years' experience in chemical and process safety engineering. His early career included 20 years in design and project engineering with various fine chemical and pharmaceutical companies where he designed chemical processes, specified plant equipment and selected materials for highly corrosive and toxic processes, often where textbook data was not available. This was followed by 10 years in offshore oil and gas design projects where he was responsible for setting up a Technical Safety group to change design safety practices in the aftermath of the 1988 Piper Alpha disaster. In recent years, he has been called upon to conduct various offshore and onshore incident investigations. His career has given him experience in project engineering, project management, process design and operations, safety engineering and risk management. He is a Fellow of the UK Institution of Chemical Engineers. He served on the Scottish Branch committee, and was elected chairman for a two-year term in 1991. He has also been chairman of the Safety and Reliability Society - North of Scotland Branch. He has delivered training courses in Process Hazard Analysis (HAZOP and HAZID), Process Safety Management, Hazard Awareness, Risk Assessment, Root Cause Analysis, Failure Modes & Effect Analysis and has lectured on Reliability Analysis to the M.Sc. course in Process Safety and Loss Prevention at Sheffield University. In addition to delivering training courses, he currently facilitates HAZOP / HAZID / LOPA studies and undertakes expert witness roles advising lawyers engaged in contractual disputes, usually involving the design or construction of chemical plants or Oil & Gas production facilities, or criminal prosecutions. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

Delivered in Internationally or OnlineFlexible Dates

£3,499 to £4,199

Show all 121

118 Educators providing Courses

marshall assessment

Birmingham

alchemilla apothecary

Saint Mawgan

compete high

London

nextgen learning

London, United Kingdom

westlink tiling courses

iomh - institute of mental health

London

compliance central

Luton

moderntronics

Harrow,

Courses matching "Chemical"

Chemical Engineering for Non-Chemical Engineers

By EnergyEdge - Training for a Sustainable Energy Future

Chemical Skin Peels (ClinicCare) Training Course

By Cosmetic College

VTCT Level 4 Chemical Skin Peel Training

By Cosmetic College

Level 4 Chemical Peels

By Elixskin & Elixir Skin Training

Process Safety Management & Engineering Applications [IChemE Approved Training Course]

By EnergyEdge - Training for a Sustainable Energy Future

Advanced Process Safety Engineering

By EnergyEdge - Training for a Sustainable Energy Future

Chemical Peel Diploma

By Elixskin & Elixir Skin Training

Process Safety Management & Engineering Applications

By EnergyEdge - Training for a Sustainable Energy Future

Process Hazard Assessment using the HAZOP Technique and HAZOP Team Leader Training

By EnergyEdge - Training for a Sustainable Energy Future

Advanced Process Safety Engineering

By EnergyEdge - Training for a Sustainable Energy Future

Search By Location