405 Courses in Sheffield

QA Level 3 Award In First Aid At Work (Annual Refresher) (RQF) Half day course How much do you still remember from your last first aid training course? Skills fade rapidly. This course is there to ensure learners retain the most important skills of saving a life. The Annual Refresher as recommended by HSE Course Contents: Assessing an Incident Managing an Unresponsive Casualty Recovery Position CPR Safe Use of an AED (Automated External Defibrillator) Choking Benefits of this course: 1.1 million workers in Britain had an accident at work in 2014/2015 Of those, 2,700 were from the East Midlands On average, one out of every 370 people received an injury at work Are you already holding a valid Emergency First Aid at Work (EFAW) or First Aid at Work (FAW) Certificate? How much can you still remember a year later? HSE strongly recommends that first aiders undertake Annual Refresher training during any three year FAW/EFAW certification period. This will help qualified first aiders remain competent and keep up to date with any changes to first aid procedures. In just half a day, this course is an ideal way to satisfy HSE requirements whilst minimising disruption to the work day. Accredited, Ofqual regulated qualification: Our Emergency First Aid at Work Annual Refresher course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards.This means that you can be rest assured that your Emergency First Aid at Work Annual Refresher Certificate fulfils the legal requirements and is a very good way to make sure you and your employees keep your First Aid skills up to date.The Ofqual Register number for this course is 603/3154/9

City and Guilds 2391-51, level 3, is ideal for people with limited experience of periodic inspection of electrical installations. If you are already working as an Electrician, but have not carried out inspection and testing since qualifying, or you require to update before moving onto other qualifications, then this 5 day City and Guilds 2391-51 course will be right for you. City and Guilds 2391-51 Course Content: Principles, practices and legislation for the periodic inspection, testing and condition reporting of electrical installations. Requirements for completing the safe isolation of electrical circuits and installations Requirements for inspecting, testing and recording the condition of electrical installations Requirements for completing the periodic inspection of electrical installations Differences between periodic inspection and initial verification Requirements for safe testing of electrical installations which have been put in to service Requirements for testing before circuits are live. Requirements for testing live installations Understanding and interpreting test results Requirements for the completion of electrical installation condition reports and associated documentation Confirmation of safety of system and equipment prior to completion of inspection, testing and commissioning Carrying out inspection of electrical installations prior to them being put into service Ability to test electrical installations prior to them being put into service Produce a condition report with recording observations and classification In order to claim the full City and Guilds 2391-51 qualification, students must successfully complete: One x1 hour 30 minute online multiple choice (Open Book) Exam to be completed during the course One x3 hours 30 minute practical test to be completed after the course, broken into sections as follows: Task A – Visual Inspection – 30mins Task B – Periodic Inspection and Test – 2hrs Task C – Short Answer Questions – 1hr To further support this course, we offer a 1 day practical workshop (at the cost of £120.00 Net VAT) available to candidates who have completed the course and require further ‘hands on’ practical experience prior to their practical exam. Most students who take this option elect to complete this the day before their practical assessment. The City and Guilds 2391-51 course costs include examination entry fees.

APM Project Fundamentals Qualification (PFQ): In-House Training This practical course gives Participants a solid introduction to the fundamentals of project management and to prepare them for the one-hour, multiple-choice exam held at the end of the course. The APM Project Fundamentals Qualification (PFQ) is an entry-level qualification suitable for those who are new to project management and working in a project team, and who wish to understand the standard terminology. The goal of this course is to prepare you to successfully pass the exam. What you will Learn You'll learn how to: Identify project management terminology and context Identify project management processes Identify the roles involved in project management Describe project success criteria and benefits Prepare project documentation Acquire the level of understanding needed to pass the APM PFQ examination Getting Started Introductions Course structure Course goals and objective Project Context Project characteristics Project management processes Business and project context Organizational roles Project Lifecycle Programme and portfolio management Project Concept Phase Stakeholder management Project success and benefits management Business case Benefits People in Projects Leadership and teamwork Communication Project Definition Phase Project management plan Quality management Risk management Scope management Scheduling Resource management Estimating Procurement Project Implementation Phase Change control and configuration management Issue management Information management Project Hand-over and Close-out Phase Hand-over and close-out Post-project review Revision and Exam Revision and practice questions APM PFQ examination

A ½ day short City and Guilds 2393-10 course aimed at anyone involved in electrical installations in dwellings. The Government approved Document P (electrical safety) came into effect on the 1st January 2005. For the first time the mainstream work of domestic electrical installers became subject to the requirements and procedures associated with Building Control. Domestic Electrical installers need to appreciate the requirements that apply to building work they carry out in connection with their electrical work, and they need to understand the way that Building Control works and the procedures that need to be followed. This short City and Guilds 2393-10 course is to enable those involved in the installation of electrical systems within the domestic environment to gain an understanding of how electrical installations in dwellings must comply with all relevant Building Regulations and how electrical installations in dwellings can affect the building construction. Please note that this City and Guilds 2393-10 qualification is only suitable for those practising their trade in England and Wales due to their being different regulations in Scotland and Northern Ireland. The City and Guilds 2393-10 examination is a 40 minute open book pc based assessment and will be held in the afternoon following the course, with instant results. The City and Guilds 2393-10 course costs include examination entry fees.

QA Level 2 Award In Working At Height (RQF) Face to Face: Half-day course Virtual Classroom: Spread over 2 sessions of 2½ hr duration Raises awareness of safety considerations whilst working at height Teaches how to ensure a safe working environment Course Contents: Legislation, regulations, roles and responsibilities when working at height The consequences of non-compliance Safe working practices when working at height How to reduce the risks from:Weather conditionsWorking environmentsOthers working at heightFalling objectsFragile surfaces Importance of risk assessments Rescue plan requirements Selecting appropriate equipment Identifying safety precautions when using equipment Importance of Personal hygiene Reporting procedures when equipment is faulty Benefits of this course: 35 People died in 2017/18 due to falls from height There were also 43,000 non-fatal accidents due to falls from height These resulted in 80 major injuries And 230 over-3-day absences, costing employees and employers money Even just a height of less than 2 meters can result in serious, or even fatal, injuries The Work at Height Regulations 2005 require employers, and those in charge of any type of work at height activity to ensure that the work is properly planned, well supervised and carried out by competent people Employees who do this course will learn to have a greater awareness of the risks involved in working at height, and on how to best manage those risks, ensuring the safety of all concerned Accredited, Ofqual regulated qualification: This Health and Safety Training Course is a nationally recognised, Ofqual regulated qualification accredited by Qualsafe Awards.This means that you can be rest assured that your Health and Safety Certificate fulfils the legal requirements and is an excellent way to make sure you and your employees are trained in Health and Safety.The Ofqual Register number for this course is 603/2687/6

Highfield Level 2 Award In HACCP For Catering (RQF) Full day course This course gives learners the knowledge and understanding of HACCP regulations Shows learners how to implement these in their catering environment Benefits of this course: This course is for those working in a food catering environment and other food handlers This qualification is intended for both those who are already working in catering and those who are preparing to work in the industry This course will give an introduction to HACCP It will support those who are, or will be part of a HACCP (hazard analysis and critical control points) team within a catering environment Course Contents: The procedures required to develop Food Safety Management systems based on HACCP principlesThe role of the food handler in implementing a Food Safety Management System based on HACCP principlesThe need for prerequisite programmesCommon prerequisite programmesSteps required to develop HACCP based food safety systems How to develop food Safety Management systems based on HACCP principles The purpose of identifying hazards at each step in a food process The importance of, and methods which can be used to determine, specific controls at steps in the process The importance of identifying critical (safe) limits The importance of monitoring controls Ways of monitoring controls The purpose of taking appropriate corrective action The importance of verification and review of HACCP based Food Safety Management Systems Documentation and records needed to support HACCP based Food Safety Management Systems Accredited, Ofqual regulated qualification: Our HACCP for Catering training course is a nationally recognised, Ofqual regulated qualifications accredited by Highfields Qualifications. This means that you can be rest assured that your HACCP for Catering Certificate provides information for best practice and goes a long way toward ensuring that food produced is as safe as possible. The Ofqual Register number for this course is 603/2527/6

Highfield Level 2 Award In HACCP For Manufacturing (RQF) Full day course This course gives learners the knowledge and understanding of HACCP regulations Shows learners how to implement these in their manufacturing environment Benefits of this course: This course is for those working in a food Manufacturing environment This qualification is intended for both those who are already working in catering and those who are preparing to work in the industry This course will give an introduction to HACCP It will support those who are, or will be part of a HACCP (hazard analysis and critical control points) team within a Manufacturing environment Course Contents: The procedures required to develop Food Safety Management systems based on HACCP principlesThe role of the food handler in implementing a Food Safety Management System based on HACCP principlesThe need for prerequisite programmesCommon prerequisite programmesSteps required to develop HACCP based food safety systems How to develop Food Safety Management systems based on HACCP principles The purpose of identifying hazards at each step in a food process The importance of, and methods which can be used to determine, specific controls at steps in the process The importance of identifying critical (safe) limits The importance of monitoring controls Ways of monitoring controls The purpose of taking appropriate corrective action The importance of verification and review of HACCP based Food Safety Management Systems Documentation and records needed to support HACCP based Food Safety Management Systems Accredited, Ofqual regulated qualification: Our HACCP for Manufacturing training course is a nationally recognised, Ofqual regulated qualifications accredited by Highfields Qualifications. This means that you can be rest assured that your HACCP for Manufacturing  Certificate provides information for best practice and goes a long way toward ensuring that food produced is as safe as possible. The Ofqual Register number for this course is 603/2527/6

First Aid - Level 3 First Aid at Work Re-Qualification Two Day Course Cost:  £125 + vat per person Group Booking: 8 People or more £850 (inclusive of vat). SYLLABUS A range of subjects are covered, including:- Legalities, responsibilities and reporting Dealing with an unresponsive casualty Fractures and spinal injuries Resuscitation and AED Awareness Assessment of the situation CERTIFICATION Control of bleeding Shock (including Anaphylaxis) Heart attacks Head injuries Sprains and strains Poisoning Bandaging Choking Eye injuries Chest injuries Maximum of 12 People All learners will have the skills and knowledge to provide the organisation with Emergency First Aider’s that can provide treatment to their casualties in a prompt, safe and effective manner. This accredited Two-Day First-Aid at Work Course is designed for those who currently hold a First-Aid Qualification that is due to expire and meets the requirements of the Health & Safety (First Aid) Regulations 1981 and the Health and Safety (First Aid) Regulations (Northern Ireland) 1982. The Certificate is valid for 3 years and will expire from the date on the certificate. First Aid • Life-Saving Skills First Aid Training is not just a Course; it’s a life-saving skill everyone should possess. It’s about being prepared for the unexpected knowing how to respond when seconds count. As Health & Safety Law mandates, employers must create a secure and healthy environment for their employees. This responsibility extends to providing immediate and effective First-Aid Care when necessary. We understand that learning is best achieved through practical application. That’s why we offer In-Person Workshops on First Aid. These workshops provide hands-on experience under the guidance of our highly qualified trainers. You’ll have the opportunity to practice what you’ve learned in a controlled environment before you need to apply it in real life. Upon completion of a First-Aid Qualification, employers can be assured that they have highly-trained personnel capable of responding swiftly and effectively to any First-Aid needs. This fulfils legal obligations and contributes to a safer, more caring work environment for all. In essence, the First Aid Certification is more than just a qualification; it’s an investment in the health and safety of your workforce.

FAA Level 1 Award In Awareness Of First Aid For Mental Health (RQF) Classroom (4.5 hour course), Virtual (2 x 2 ½ hour sessions) Gives learners a good awareness of Mental Health First Aid Gives learners the skills to start that difficult conversation Course Contents: What is Mental Health? Why people develop mental health conditions What the role of a mental health first aider is Knowing how to provide advice and practical support Knowing how to recognise and manage stress Recognising a range of mental health conditions: Depression Anxiety Psychosis Eating disorders Suicide Self-harm Benefits of this course: 37% of all work-related ill-health is due to mental health problems Problems with mental health cover 45% of all working days lost A whopping 12.8 million working days, or 49, 042 years, were lost due to mental health problems in 2018/19 602,000 workers suffered from work-related stress, depression or anxiety in 2018/19 One in four people will have a mental health problem at some point during their lives Whether work is causing or aggravating mental health problems, employers have a legal responsibility towards their employees Work-related mental health issues must to be assessed to measure the levels of risk to staff Where a risk is identified, steps must be taken to remove it or reduce it as far as reasonably practicable This half day course gives people a good awareness of mental health in the workplace For a more complete introduction, see our full day First Aid for Mental Health or two day Supervising First Aid for Mental Health courses Accredited, Ofqual regulated qualification This Awareness of Mental Health First Aid Course is a nationally recognised, Ofqual regulated qualification accredited by First Aid Awards. This means that you can be rest assured that your Mental Health First Aid Certificates fulfil the upcoming legal requirements and are a very good way to make sure you and your employees have a supporting workplace to deal with staff's mental health conditions. The Ofqual Register number for this course is 603/3768/0

The Level 2 NVQ Certificate in Plant Operations (Construction) -Compacting qualification has been developed for achievement in a real workplace environment which means you need to be employed to undertake this qualification. This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding and to demonstrate your competence in a real workplace environment so you can work in Compacting within the construction industry. You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be assessed by an occupationally competent and qualified assessor whose job is to work with you and help you complete your qualification. This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge. The learner will learn key practical skills and knowledge in these mandatory units: -Conforming to General Health, Safety and Welfare in the Workplace -Conforming to Productive Working Practices in the Workplace The learner will also learn key practical skills and knowledge in one of the following optional units: -Preparing and operating soil compactors to compact materials in the workplace -Preparing and operating landfill compactors to compact materials in the workplace -Preparing and operating ride-on rollers to compact materials in the workplace Entry Requirements There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.