Name: GDPR - CPD Certified
Price: 45 GBP
Availability: InStock

moderntronics

Harrow,

In these terms and conditions (“Conditions”) the following expressions shall have the following meanings: “Business Day” means any day other than Saturday, Sunday or a public holiday. “Business Hours” means the hours detailed in Condition 32 below. “Contact Hours” means Monday to Friday (inclusive) from 07:00 hours to 17:00 hours but excluding bank holidays. “Contract” means any contract between MT and the Customer for the supply of Hardware and/or Software (with the associated Licence) and/or services which is subject to these Conditions. “Customer” means any person, firm or company who enters into a Contract with MT to which these Conditions apply. “Force Majeure” means any event outside the reasonable control of either Party affecting its ability to perform any of its obligations (other than as to payment) under these Conditions. “Goods” means all or any tangible or intangible goods or intellectual property including but not limited to Hardware and Software which are provided to a Customer in accordance with these Conditions. “Hardware” means any hardware provided by MT to the Customer. “MT” means MODERNTRONICS Ltd. or its servants and agents as the case may be. “Insolvency Event” means any one of the following in relation to the Customer: (i) a notice being issued to propose a resolution for winding up or dissolution, or such a resolution being passed; (ii) a petition for a winding up or an administration or bankruptcy order being presented, or such an order made; (iii)any steps being taken with a view to a voluntary arrangement or other assignment, composition or arrangement with all or any creditors or any moratorium, readjustment, rescheduling, forgiveness or deferral of all or any indebtedness; (iv) suspension of payments to all or any creditors and/or ceasing business; (v)an encumbrancer taking possession of all or any assets; (vi) an administrator or receiver being appointed over the Customer or all or any of its assets; (vii)any action anywhere similar or analogous to any of the foregoing; or MT reasonably believing that any of the foregoing is imminent. “Licence” has the meaning attributed to it in Condition 23 below. “Minimum Term” means the term set out in Condition 17 below. “Party” means MT or the Customer and “Parties” means both of them. “Response Time” means two Working Hours from an initial call to the hotline under Condition 26 or 28 below. “Seminar” means any seminar provided by MT. “Service Operator” has the meaning given to that term in Condition 28 below. “Site” means https://www.moderntronics.com and all subdomains including (but without limitation) “Software” means software or software updates or upgrades provided by MT and licensed to the Customer under Condition 23 below. “Training Sessions” means any training session provided by MT. “Working Hours” means the hours between 9:00 to 17:00 on any Business Day 2. Interpretation In these Conditions, the following rules apply: A person includes a natural person, corporate or unincorporated body (whether or not having separate legal personality). A reference to a Party includes its personal representatives, successors or permitted assigns. A reference to a statute or statutory provision is a reference to such statute or provision as amended or re-enacted. A reference to a statute or statutory provision includes any subordinate legislation made under that statute or statutory provision, as amended or re-enacted. Any phrase introduced by the terms including, include, in particular or any similar expression shall be construed as illustrative and shall not limit the sense of the words preceding those terms. A reference to writing or written includes faxes and e-mails. 3. General Information These Conditions apply when MT: sells and delivers Hardware; sells and delivers Licences; sells and delivers Software; or provides repairs or any other services to the Customer. They will also apply to other business transactions unless MT agrees that alternative special conditions apply. These Conditions apply to the exclusion of any other conditions that may be proposed by a Customer or implied by law (insofar as such exclusion is lawful). Part II Specific Provisions for the Use of the Online Shop Customers purchasing Goods from the Site, must read all Parts of these Conditions, which apply to them in full. 4. Consumers The Goods and services provided by MT are designed only for sale to and use by businesses in the course of their business activities. MT does not knowingly sell to any person dealing as a consumer or supply anything for personal use. 5. Customer’s Status By placing an order on the Site, the Customer warrants that he or she is: legally capable of entering into binding contracts and, where the Customer is an individual, that he or she is at least 18 years old; and is dealing in a business capacity and purchasing Goods and/or services for the purpose of his business and not for personal use. Part III General Conditions for the Provision of Goods and Services 6. Formation of Contract Quotations provided by MT to the Customer are not binding on MT. The Customer’s order constitutes an offer to MT to buy the Goods or services. All orders are subject to acceptance by MT. The offer will be deemed accepted, and a Contract formed, when MT sends the Customer confirmation that the Goods have been dispatched (“Dispatch Confirmation”) or, in the absence of a Dispatch Confirmation, when the Goods are delivered. The Contract will only relate to those Goods whose dispatch is confirmed to the Customer by a Dispatch Confirmation or if no Dispatch Confirmation is sent, those Goods which are actually dispatched. MT is not obliged to supply any Goods which may have been part of the Customer’s order until the dispatch of such Goods has been confirmed in a separate Dispatch Confirmation. Subject to Condition 17 below, an order for services will be deemed to have been accepted, and a Contract formed, when MT sends the Customer confirmation that the services ordered will be provided (“Service Confirmation”) or, in the absence of a Service Confirmation, when the services begin to be provided. Oral representations will only be binding upon MT if they are expressly confirmed in writing by MT to the Customer. 7. Price Unless MT expressly specifies prices to the Customer, MT’s current list of prices applicable at the time of the acknowledgement of order will apply. Unless otherwise agreed in writing, all prices are exclusive of value added tax, postage, freight, insurance, forwarding fees, installation and commissioning, travelling expenses and subsistence, which will be added as appropriate. MT will charge overtime for work outside of their normal Business Hours at up to 150% of the hourly rate from time to time applicable during Business Hours. Subject to Condition 16 below, prices are liable to change at any time, but changes will not affect orders in respect of which MT has already sent the Customer a Dispatch Confirmation or a Service Confirmation as the case may be. The Site contains a large number of products and it is always possible that, despite MT’s efforts, some of the products listed may be incorrectly priced. MT will normally verify prices as part of dispatch procedures so that, where a product’s correct price is less than our stated price, MT will charge the lower amount when dispatching the product to you. If a product’s correct price is higher than the price stated on our site, MT will normally, at our discretion, either contact you for instructions before dispatching the product, or reject your order and notify you of such rejection. MT is under no obligation to provide any Goods or services to the Customer at an incorrect (lower) price, even after MT has sent a Dispatch Confirmation or a Service Confirmation in relation to those Goods or services if such incorrect price could reasonably have been expected to be recognised by the Customer as an error. 8. Delivery and Availability The Customer’s order for Goods will be fulfilled by the delivery date in the Dispatch Confirmation or, if no delivery date is specified, then within 30 days of the date the Customer made his order (where such an order leads to a Contract). The period for delivery or performance of the Contract will normally commence on MT’s acknowledgement of the order. However, if the Customer is required to do anything before MT can effect delivery, MT will, as soon as practicable, notify the Customer accordingly. The time within which MT must deliver any Goods will run from the date on which MT receives notice from the Customer that it has duly complied with such notification from MT. Unless otherwise agreed in writing, any periods mentioned in the acknowledgement of order for services and Software development are based on a preliminary estimate of the required workload and therefore are approximate only. Time of delivery and performance is not of the essence. If MT fails to meet any delivery or performance dates set out in the acknowledgement of order and is solely responsible for such failure, the Customer may terminate the Contract but only after MT has been given an opportunity to rectify the situation and subsequently fails to meet the revised set of delivery or performance dates provided by MT to the Customer in writing. Unless MT has been deliberately or grossly negligent, all further claims of the Customer on the basis of the delay in performance are excluded. If MT cannot deliver or perform its obligations under the Contract due to Force Majeure or a failure of the Customer to cooperate or any other act, default or omission of the Customer, then MT will be entitled to perform its obligations under the Contract once the issue has been resolved, provided the issue occurred while MT was still allowed to deliver or perform and MT shall have no liability whatsoever for any delay or its failure to perform its obligations. 9. Agreed Performance Unless specified otherwise in writing, the agreed performance in respect of any repairs provided by MT, at the Customer’s request will be to adjust the relevant unit(s) to MT’s applicable standard specifications for that unit. Where the relevant unit(s) cannot be repaired to MT’s applicable standard specification due to the Customer limiting the repairs required or the time and money to be invested MT may exceed the Customer’s request if MT considers, at its sole discretion, that such additional repairs are reasonable and will ensure the proper functionality of the unit in question. The agreed performance levels for MT’s maintenance and care services are as set out in Conditions 26 and 28 below; for all other services the agreed performance levels will be as set out in the acknowledgement of order. 10. Refunds Where the Customer returns Goods (at the Customer’s cost) because he or she claims that the Goods are defective, MT will examine the returned Goods and will notify the Customer of its findings within a reasonable period of time. If MT (in its sole discretion) deems that the Goods are defective, MT may at its option repair, replace or provide a refund in respect of such defective Goods. MT will process any repair, replacement or refund as soon as practicable and, in the case of any refund, within 30 days of the day MT confirmed to the Customer that the Customer was entitled to the same. Such refunds will be made in full, including a refund of any delivery charges for sending the item to the Customer. 11. Import Duty If the Customer orders Goods for delivery outside the UK, they may be subject to import duties and taxes which are levied when the delivery reaches the specified destination. The Customer will be responsible for payment of any such import duties and taxes. Please note that MT has no control over these charges and cannot predict their amount. Customers should contact their local customs office for further information before placing an order. Customers must comply with all applicable laws and regulations of the country for which the Goods are destined. The Customer will indemnify and keep indemnified MT in respect of all costs, proceedings, losses and liabilities resulting from any breach by the Customer of any such laws. 12. Retention of Title to Property The Goods will be at the Customer’s risk from the time of delivery. Property in and title to all Goods will remain with MT until MT has received payment for the full price of all the Goods (and/or all other goods and/or services supplied by MT to the Customer under any other contract whatsoever).. The Customer may sell or use Goods in which title is retained during the course of their normal business, but may not give such Goods by way of pledge or pledge these Goods as security. Until the property in and title to the Goods passes to the Customer: the Customer shall keep the Goods properly stored, protected and insured and separate from all or any other goods whether belonging to MT, the Customer or any third party; MT shall be entitled at any time forthwith to revoke the Customer’s power to deal with the Goods; and such power shall automatically cease if an Insolvency Event shall occur in respect of the Customer; and the Customer shall not make any modification to the Goods, the Software or their packaging or alter, remove or tamper with any marks, numbers or other means of identification used on or in relation to the Goods. Upon termination of the Customer’s power to deal with the Goods, the Customer shall place the Goods at the disposal of MT and MT are hereby irrevocably authorised without the need for consent of any third party but using only such force as may be necessary, to enter upon any premises of the Customer or any third party for the purpose of removing the Goods. If third parties claim title to Goods with retained title, the Customer will inform MT without delay, will notify the person making the claim of MT’s title and will support MT in enforcing its rights, including taking all the necessary steps required to preserve MT’s rights, including commencing litigation at the Customer’s own expense. If the Customer breaches the Contract, e. g. by delaying payment, the Customer will be obliged to return the Goods with retained title if requested by MT, in return for which MT will not terminate the Contract. 13. Payment Where services, maintenance or care are provided on an ongoing basis, MT will invoice the Customer for these at the beginning of the billing period or as soon as reasonably practicable thereafter. The Customer will pay MT’s invoices in full within 30 days from the date of the relevant invoice. Depending on the scope of an order, payments for such services, maintenance or care are due either upon placement of the order by the Customer or upon partial delivery of the same of between 40 to 50% of their respective order value. BACS or cheque are the only methods of payment accepted. Invoices for Seminars and Training Sessions will be issued at the beginning of the respective session and payment is due immediately and without deduction. 14. Delay of Payment Where a Customer fails to pay an invoice by the due date, MT will be entitled to charge the Customer interest on all monies outstanding from the due date until the actual date of payment (both before and after judgment) at a rate of 8% above the base rate of the Bank of England calculated on a daily basis. 15. Setting-Off and Refusal of Payment The Customer cannot exercise any right of set-off in respect of amounts owed to or by MT. 16. Change of Pricing by MT for Ongoing Maintenance or Care MT may increase its prices for maintenance and services by giving the Customer written notice 2 months prior to the end of the Minimum Term. The Customer has 4 weeks from the date of receipt of the written notice from MT to object to the change. Where the Customer so objects, the Customer will be entitled to give notice to MT to terminate the Contract as of the date of the proposed price increase. 17. Automatic Extension of Contract Where services, maintenance or care are performed on an ongoing basis the Contract will come into effect upon acceptance by MT of the first order from the Customer for Software maintenance. The Contract will initially run until the date specified at “Minimum Service Duration” as set out in the “MT Service Product List” or until the expiry date where an expiry date is stipulated in the Contract (“Minimum Term”). Subject to one of the Parties serving written notice of termination on the other at least three months prior to the expiry of the Minimum Term, the Contract will be extended automatically. In the case of Software Licences supplied without a time limit, the Contract will extend until December 31st of the current year. The subsequent extension periods will begin on January 1st and end on December 31st of the respective year. In the case of Software Licences supplied with limited validity (e.g. a licence for 1-year) the extension is based on the terms and conditions set out in the description of the respective licence (e.g. extension by one further year). Unless otherwise agreed in writing, any extension to a Contract will be on the basis of MT’s current price list as at the date of such extension. 18. Delivery Obligations and Shipping The conditions for EXW (ex works) (MT’s premises or such other place referred to in the relevant order) as set out in the Incoterms 2010 apply to delivery of any Goods. Claims for any transport damages and any replacement of damaged Goods, remain with the Customer who is responsible for adhering to the mode and period for the filing of any claims with carriers, shippers and insurers. 19. Scope of Warranty (Material Deficiencies and Deficiencies in Title) MT warrants that the Hardware is free from defects in workmanship and material as at the time of transfer of risk; and warrants that the Software does not contain any flaws which void or substantially reduce its value or suitability for the usual or contracted purpose. Where MT is not the author of the Software, MT does not warrant that such Software will run without interruptions or errors, nor that MT will be capable of resolving all Software errors, nor that the Customer will be capable of achieving all of the functions included in the Software in all of the combinations chosen by the Customer, nor that these will meet the Customer’s requirements. MT will only warrant the quality and/or durability of Goods if it has expressly agreed in writing with the Customer that it will do so. The warranty period is 1 year. Where MT is the author of the Software such Software is subject to MT’s standard warranty. 20. Obligation to Inspect and Serve Notice of Defects The Customer must inspect the Goods upon delivery or repair and must notify MT in writing of any failure by MT to meet the specification within 7 days of delivery or repair or (where the failure was not apparent on reasonable inspection) within a reasonable time being no more than 1 month after discovery of the failure. Where the Customer fails to provide such notice MT will have no liability under its warranty. 21. Liability Subject only to Condition 21 d), MT shall not be liable to the Customer in contract, tort (including without limitation negligence) and/or breach of statutory duty for any loss or damage which the Customer may suffer by reason of any act, omission, neglect or default (including negligence) in the performance of the Contract by MT, its servants or agents, in a sum which is greater than GBP 200,000 per incident or series of connected incidents. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect loss of any kind resulting from these Conditions, its performance or any breach of its terms. Subject only to Condition 21 d), MT shall not be liable to the Customer whether in contract or tort (including without limitation negligence and/or breach of statutory duty) for indirect economic loss of any kind including (but without limitation) loss of business opportunity, reputation, goodwill resulting from these Conditions, its performance or any breach of its conditions. Notwithstanding any other provision herein, nothing in these Conditions shall operate so as to limit or exclude MT’s non-excludable liability in respect of death or personal injury caused by the negligence of MT to exclude the application of Section 12 of the Sale of Goods Act 1979 and to exclude liability for fraudulent misrepresentation. MT’s liability for loss of data is limited to the effort required to restore the data from proper backups provided by the Customer. 22. Third Party Rights If any third party claims or takes action against the Customer, because Goods delivered by MT, or their use in accordance with the instructions provided by MT, purportedly violate their commercial rights or proprietary rights, then the Customer will inform MT of the same. MT agrees that they will assist the Customer in defending such claims. Where the claim is made to the Customer within 12 months of the date of delivery, MT will indemnify the Customer against claims provided that the Customer: appoints MT to defend the claims or to settle the dispute, and promptly notifies MT of any such claim, keeps the Customer informed of all information received and provides such reasonable assistance to MT as it shall reasonably require, does not defend the action itself without coordinating such defence with MT, and does not at any time admit liability or otherwise settle or compromise or attempt to settle or compromise the said claim or action except upon the express instruction of MT, the alleged breach of rights is not based on alteration of the delivered item used by the Customer, and does not use the item delivered by MT in conjunction with other items and/or in a fashion that breaches any such rights, in a situation where the use of the item as delivered by MT would not have breached the rights of the person who has filed the claim. MT may at any time and at its own expense acquire on behalf of the Customer the right to continue to use the Goods, to replace the Goods or alter them in such a fashion that the rights of others are no longer breached. If this is not possible, the Customer shall return or destroy the Goods if required to do so by MT who will reimburse the purchasing price for the Goods less depreciation. If the Customer refuses to do so, MT will no longer defend the claim or provide the Customer with any further support. The Customer has no further rights in case of disputes over proprietary rights with third parties and MT shall have no liability therefore unless MT could be blamed for acting deliberately or with gross negligence. Part IV Special Conditions for Delivery of Software 23. Conditions of Use for Delivered Software In the case of delivery of Software to the Customer, MT hereby grants the Customer a simple, non exclusive and non-transferable, licence to use the Software (“Licence”) . The validity of the Licence is not time limited, unless otherwise specified to the contrary in the terms and conditions of the Licence. MT, grants the Customer the use of such Software in the form of the object code and the user documentation with the use being restricted to one electronic data processing system at any one time and only for the tasks for which it is intended. Unless permitted by law, the Customer will not decompile the Software or perform reverse engineering. The Customer may duplicate the Software but only to the extent that this is required for the permitted use, and in order to allow it to perform data backup. Upon delivery of any Software, including updates and upgrades, the Customer will immediately produce a backup copy. MT may terminate the Licence granted to the Customer pursuant to this Condition 23 with immediate effect if the Customer is in breach of the conditions for the use of the Software for a period of 30 days from the date of a written notice of such a breach from MT or any third party. On termination of this Contract howsoever arising, the Customer will return to MT within 30 days all Software together with any related materials owned and licensed by MT and shall delete all copies and partial copies of the Software however stored within 7 days of service of the notice. Proof of such deletion must be provided to MT without delay. On receipt of prior written consent from MT, the Customer may retain a copy of the Software for the purposes of archiving. 24. Delivery of Software MT will only install the Software if this has been expressly agreed in writing between the Customer and MT. MT is able to provide telephone consultancy and support concerning questions relating to the application of the respective Software products as well as the solution of problems that may occur as provided for in Condition 26 below. 25. Prerequisites for Running the Delivered Software The proper running of Software systems supplied will only be guaranteed if the Hardware and operating system components used correspond to the reference systems of the respective manufacturer(s), as well as having been approved and certified. Unless otherwise agreed in the Contract, the Customer shall ensure that the provisions in this Condition 25 are complied with. Part VMaintenance and Care Application Software 26. Scope of Performance of MT Services for Application Software For the Software products, unless otherwise expressly agreed in writing, MT will provide the following services, denoted by Service Level “SW-Service STANDARD” and Service Level “SW-Service E-STANDARD”: Right to use Software and documentation updates: MT grants the Customer a non-transferable, non-exclusive Licence to use the Software and any documentation or updates. The right of use is not limited in validity, unless otherwise specified in the terms and conditions of the Licence. Software and documentation updates: MT will supply the Customer with the current version of the Software as specified in the Contract. This will be done as specified by the manufacturer of the Software. The documentation will be supplied in the form determined by the manufacturer of the Software. The installation of Software updates will be performed by suitably qualified personnel of the Customer. Alternatively for an additional charge, MT may install the Software updates on behalf of the Customer. Where the Customer has adapted the Software, the Customer will be liable for the additional cost of performing the same adaptation to the new version of the Software or alternatively the Customer may perform the necessary adaptation himself. Hotline (Service Level “SW-Service STANDARD” only) MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. E-mail Hotline (Service Level “SW-Service E-STANDARD” only) MT is able to provide e-mail consultancy and support in relation to queries relating to the application of the respective Software products as well as the resolution of any problems (in so far as it is reasonably practicable to do so) which may occur. This service will be provided by MT during the Contact Hours Wherever possible, qualified consultancy will be provided by MT within the Response Time. MT Hotline: E-mail: hotline@MT.com Internet: http://www.MT.com/customersupport Software error messages Where Software problems occur which MT is unable, for whatever reason, to resolve, the Customer may send a written error message to MT. The purpose of such an error message is to identify the error in the Software and enable the manufacturer to resolve the error. MT shall liaise with the manufacturer(s) of the Software products to resolve any Software errors as promptly as possible. Restoration of any data, regardless of the cause of the data loss, is not the responsibility of MT. 27. Obligation of the Customer to Co-operate Pre-conditions for the provision of the services by MT to the Customer are that the Customer has legally acquired the Software and holds a corresponding Licence to use it. In addition, the Software must be in the same condition that it was in when it was delivered. The services exclusively relate to the current release and delivered version of the Software. If earlier Software versions are used, a one-time update service which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Services will not be performed for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). If the operating system for the Hardware is not included in the Contract, the Customer must update the operating system to the most recent version (e. g. by purchasing updates) if this is required in order to use the new versions of the application Software. Hardware and Operating Systems 28. Scope of Performance of MT Maintenance and Care Services for Hardware and Operating System For Hardware products and the operating system, unless otherwise agreed in writing, MT will provide the following services, denoted by Service Level “HW-Service SPECIAL”: The scope of performance is briefly set out in the “Special Description” for each product listed in the attached “MT Service Product List”. The exact scope of performance will be determined in accordance with the attached description of performance issued by the respective MT service operator (“Service Operator” including but not limited to Hewlett-Packard, Fujitsu Siemens and Silicon Graphics). The following shall also apply: Hotline MT is able to provide consultancy and support by telephone or by e-mail in relation to queries relating to the application of the respective Hardware products and operating system, as well as the resolution, (in so far as it is reasonably practicable to do so) of any problems which may occur. This service will be performed by MT during the Contact Hours: Wherever possible, qualified consultancy will be provided by MT within the Response Time. Where queries arise outside of the Contact Hours, the Customer should address such queries directly to MT’s Service Operator Response time for Hardware failures MT will use reasonable endeavours to solve a query within the Response Time. The Response Time shall be deemed to have been initiated either as soon as the customer service personnel arrives on the relevant site, or as soon as remote diagnosis is started, where either is required to resolve the problem. The appropriate Response Time will be determined in accordance with the attached description of performance issued by the respective MT Service Operator. 29. Services Not Included Unless otherwise agreed in writing, the following services will not be provided by MT to the Customer: a) Repair/re-acquisition of devices that have been damaged as a result of: incidents of war of any type civil wars, nuclear energy, deliberate action of the Customer (not of his subcontractors) b) Repair/re-acquisition that is required because of repair work or alterations of devices carried out by the Customer or any third party without the prior written consent of MT. c) Work required due to interface problems between MT’s devices and those of other manufacturers and suppliers. d) Customer service which is required because a product that is not covered under this Contract has caused an error. e) Customer service that has become necessary because devices have been used under adverse conditions (e.g. including contaminations and deviations from recommended room temperature and relative humidity) or in conjunction with accessories or (device-specific) consumables (e.g. including foreign disks, disk stacks, cassettes, printer paper and print heads of any type) (“Device Specific Consumables”) which do not meet the manufacturer’s specifications. f) Replacement of Device-Specific Consumables. g) Data backup. h) Calibration work that is not related to repair. 30. Restoration of Data/Programs The restoration of data and programs upon repair or replacement of a defective hard disk is limited to starting the copying program (Restore) used to restore the last full data backup. 31. Obligation of the Customer to Cooperate a) Hardware service Pre-conditions for the provision of Hardware services by MT are that the Hardware has been acquired legally and has been installed properly at the Customer’s site. In addition the Hardware affected must correspond to the current revision and be in proper condition when including in the Contract. These pre-conditions shall be met immediately after the expiry of the warranty period specified in the Contract. If the Hardware is included in the Contract at a later date, these pre-conditions must first be confirmed by a takeover inspection of the Hardware by MT, which will be independently invoiced and paid for by the Customer, and if required the pre-conditions will be achieved by MT undertaking the required repair work. b) Operating System Service Pre-conditions for the provision of operating system services are that the Customer has legally acquired the Software and has been granted the necessary corresponding Licence to use it. In addition the Software must be in the same condition as when it was delivered to the Customer. The services exclusively relate to the current release and version of the Software. If earlier Software versions are used, a one-time “Update Service” which will be independently invoiced and paid for by the Customer will be provided to update the Software to the latest version. Operating System services will not be provided for Software adaptations made by the Customer (for example including but not limited to macros, programs, variants, user interfaces and database applications). Part VI Generally Applicable Conditions 32. Prices and Fees for Special Services The following items are not included in the payment for services under Conditions 26 and 28 above and will be invoiced separately in accordance with MT’s current price list: Services performed outside Working Hours on the express request of the Customer. Services to correct errors caused negligently by the Customer or by any unauthorised third party as a result of improper treatment, unsuitable operating media, unauthorised manipulations, Software manipulations, non-adherence to operating conditions or otherwise. ices required due to faulty handling, excessive vibration, chemical influence, excessive dust burden or non-adherence to the properties set forth in the unit specifications. Unreasonable wait times and delays in the performance of services which are caused by the Customer. Services to remedy failures caused by Force Majeure. 33. Backup of Customer Data Prior to the commencement of any service work undertaken by MT, the Customer will backup all data in such a way that it may easily be restored by MT in the event that it is lost in the service process. 34. Change of Installation/Application Site Where maintenance and care services are provided on an ongoing basis by MT, the Customer will immediately inform MT in writing of any change to the installation or application address. If such a change results in an increase in MT’s expenses. MT reserves the right to either increase the prices charged to recover the additional expense incurred or alternatively MT may serve notice on the Customer to terminate the Contract where the new address is outside United Kingdom. 35. Miscellaneous Service Conditions and Obligations of the Customer to Co-operate MT may appoint authorised third parties to provide services. The Customer may only transfer title to services to third parties with the prior written consent of MT. Where defective components or devices are replaced by MT, these will become the property of MT. Extension of the products included in the maintenance agreement may be included in this Contract with the consent of the Customer. On request, MT will offer to the Customer a corresponding extension of the Contract, provided maintenance for the respective product is available. Where MT has to perform any services, the Customer shall accurately and without delay provide MT with any/all information that is required to perform such services. The Customer will provide MT with the name of a competent and appropriately qualified contact person and will provide the name of an appropriate substitute in order for the Hardware and Software to be maintained. Any contact(s) will have participated in the respective Seminars and/or Training Sessions held from time to time by MT or alternatively will have acquired comparable knowledge. These contacts will be available to MT’s technicians on site or will have access to the MT’s hotline as applicable. Consumables and Auxiliaries (which shall include documentation, application programs, data, telephone lines for transmission of voice and data) are not included in the scope of performance and shall be provided by the Customer in the vicinity of the system, such consumables and auxiliaries will be provided during Working Hours or, with prior consultation, outside of these hours. Additionally, the Customer will provide to MT computing time and consumables as required. 36. Specifically Ordered Service Days If service days are ordered for call-off within a specified period, such orders are binding. The services will become due for payment once they have been performed or by the end of the defined time period at the latest. Specifically ordered service days to be called off within a defined time period, can still be called off during a time of three months beyond the expiry of such defined time period. Thereafter they are lost. The claim to payment is thereby unaffected. For users that register on our website (if any), we also store the personal information they provide in their user profile. All users can see, edit, or delete their personal information at any time (except they cannot change their username). Website administrators can also see and edit that information.

Courses matching "Data Processing"

Show all 103

GDPR - How to Apply the General Data Protection Regulation Trainning Online

By Study Plex

Highlights of the Course Course Type: Online Learning Duration: 1 Hour Tutor Support: Tutor support is included Customer Support: 24/7 customer support is available Quality Training: The course is designed by an industry expert Recognised Credential: Recognised and Valuable Certification Completion Certificate: Free Course Completion Certificate Included Instalment: 3 Installment Plan on checkout What you will learn from this course? Gain comprehensive knowledge about General Data Protection Regulation or GDPR Understand the core competencies and principles of General Data Protection Regulation or GDPR Explore the various areas of General Data Protection Regulation or GDPR Know how to apply the skills you acquired from this course in a real-life context Become a confident and expert data controller or data protection officer GDPR - How to apply the General Data Protection Regulation Course Master the skills you need to propel your career forward in General Data Protection Regulation or GDPR. This course will equip you with the essential knowledge and skillset that will make you a confident data controller or data protection officer and take your career to the next level. This comprehensive GDPR course is designed to help you surpass your professional goals. The skills and knowledge that you will gain through studying this GDPR course will help you get one step closer to your professional aspirations and develop your skills for a rewarding career. This comprehensive course will teach you the theory of effective General Data Protection Regulation or GDPR practice and equip you with the essential skills, confidence and competence to assist you in the General Data Protection Regulation or GDPR industry. You'll gain a solid understanding of the core competencies required to drive a successful career in General Data Protection Regulation or GDPR. This course is designed by industry experts, so you'll gain knowledge and skills based on the latest expertise and best practices. This extensive course is designed for data controller or data protection officer or for people who are aspiring to specialise in General Data Protection Regulation or GDPR. Enrol in this GDPR course today and take the next step towards your personal and professional goals. Earn industry-recognised credentials to demonstrate your new skills and add extra value to your CV that will help you outshine other candidates. Who is this Course for? This comprehensive GDPR course is ideal for anyone wishing to boost their career profile or advance their career in this field by gaining a thorough understanding of the subject. Anyone willing to gain extensive knowledge on this General Data Protection Regulation or GDPR can also take this course. Whether you are a complete beginner or an aspiring professional, this course will provide you with the necessary skills and professional competence, and open your doors to a wide number of professions within your chosen sector. Entry Requirements This GDPR course has no academic prerequisites and is open to students from all academic disciplines. You will, however, need a laptop, desktop, tablet, or smartphone, as well as a reliable internet connection. Assessment This GDPR course assesses learners through multiple-choice questions (MCQs). Upon successful completion of the modules, learners must answer MCQs to complete the assessment procedure. Through the MCQs, it is measured how much a learner could grasp from each section. In the assessment pass mark is 60%. Advance Your Career This GDPR course will provide you with a fresh opportunity to enter the relevant job market and choose your desired career path. Additionally, you will be able to advance your career, increase your level of competition in your chosen field, and highlight these skills on your resume. Recognised Accreditation This course is accredited by continuing professional development (CPD). CPD UK is globally recognised by employers, professional organisations, and academic institutions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. Course Curriculum Introduction Trainer Introduction and Course Outline 00:02:00 Why Data Protection? What Exactly is Why Deal with Data Protection Anyway. 00:02:00 How is the Protection of Data Guaranteed. 00:04:00 The Five Basic Principles of Data Protection Introduction 00:01:00 Principle 1: Prohibition of Data Processing and Exceptions to Consent 00:01:00 Principle 2: Purpose of Data Collection 00:03:00 Principle 3: Data Collection Limits 00:02:00 Principle 4: Data Security 00:01:00 Principle 5: Transparency 00:02:00 Summary 00:02:00 The Foundations of Data Processing introduction 00:01:00 Data Processing with Consent 00:03:00 Data Processing without Consent 00:03:00 Rights of Data Subjects Rights of Data Subjects 00:05:00 Responsibility of Data Controller or Processor Introduction 00:01:00 Maintaining a Record of Processing Activities 00:03:00 Technical and Organizational Measures (TOM) 00:01:00 Data Processing 00:02:00 Data Breaches 00:02:00 Summary 00:01:00 The Data Protection Officer The Data Protection Officer 00:02:00 Summary Summary 00:02:00 Obtain Your Certificate Order Your Certificate of Achievement 00:00:00 Get Your Insurance Now Get Your Insurance Now 00:00:00 Feedback Feedback 00:00:00

GDPR - How to Apply the General Data Protection Regulation Trainning Online

Delivered Online On Demand

£19

Data Protection

By RapidEDX

Master GDPR and data protection with our comprehensive course, learning essential regulations and security measures to safeguard organizational data. Equip yourself to manage personal information effectively, ensuring compliance and building trust.

Delivered Online On Demand2 hours 20 minutes

£15

Real-Time Data Stream Processing in Azure

By Packt

Delve into big data streaming with Azure using Event Hubs, Data Lake, and Azure Stream Analytics

Real-Time Data Stream Processing in Azure

Delivered Online On Demand1 hour 14 minutes

£22.99

Data Protection (GDPR) Practitioner

4.9(27)

By Apex Learning

The General Data Protection Regulation (GDPR) is a complex piece of legislation that governs how personal data is processed by organizations across the European Union. This Data Protection (GDPR) Practitioner bundle course will provide you with the scientific information you need to understand GDPR and its implications for your organization. Learning Outcomes: Understand the key concepts of the GDPR Apply the GDPR to your organization's data-processing activities Comply with the GDPR requirements Protect your organization from data breaches Mitigate the risks of data processing This Data Protection (GDPR) Practitioner Bundle Consists of the following Premium courses: Course 01: GDPR Data Protection Level 5 Course 02: Law and Contracts - Level 2 Course 03: Information Management Course 04: Encryption Course 05: Cyber Security Awareness Training Course 06: Document Control Course 07: Paralegal Course 08: Employment Law Level 3 Course 09: Office Administration Certificate Course 10: International Law Course 11: Decision-Making and Critical Thinking So, Enrol Data Protection (GDPR) Practitioner bundle course now to advance your career! The Data Protection (GDPR) Practitioner course is designed to provide you with the knowledge and skills you need to comply with the General Data Protection Regulation (GDPR). This Data Protection (GDPR) Practitioner bundle course covers the key concepts of the GDPR, such as data subjects, controllers, processors, and personal data. You will also learn how to apply the GDPR to your organization's data processing activities. The Curriculum of Data Protection (GDPR) Practitioner Bundle Course 01: GDPR Data Protection Level 5 Module 01: GDPR Basics Module 02: GDPR Explained Module 03: Lawful Basis for Preparation Module 04: Rights and Breaches Module 05: Responsibilities and Obligations =========>>>>> And 10 More Courses <<<<<========= Key features of this Data Protection (GDPR) Practitioner bundle: This Data Protection (GDPR) Practitioner bundle is CPD QS Accredited Learn from anywhere in the world Lifetime access Our Data Protection (GDPR) is entirely online 24/7 Learner support How will I get my Data Protection (GDPR) Practitioner Certificate? After successfully completing the Data Protection (GDPR) Practitioner course you will be able to order your CPD Accredited Certificates (PDF + Hard Copy) as proof of your achievement. PDF Certificate: Free (Previously it was £10 * 11 = £110) Hard Copy Certificate: Free (For The Title Course) P.S. The delivery charge inside the U.K. is £3.99 and international students have to pay £9.99. CPD 110 CPD hours / points Accredited by CPD Quality Standards Who is this course for? Anyone from any background can enrol in this Data Protection (GDPR) Practitioner bundle. Persons with similar professions can also refresh or strengthen their skills by enrolling in this Data Protection (GDPR) Practitioner course. Students can take this course to gather professional knowledge besides their studies or for the future. Please note: This Data Protection (GDPR) Practitioner course doesn't entitle you to practice as a professional in this specific field. Rather, this course will assist you in understanding the fundamentals so that you can improve your knowledge in the relevant field. Requirements Our Data Protection (GDPR) Practitioner is fully compatible with PCs, Macs, laptops, tablets and Smartphone devices. This course has been designed to be fully compatible with tablets and smartphones so you can access your course on Wi-Fi, 3G or 4G. There is no time limit for completing this Data Protection (GDPR) Practitioner course, it can be studied in your own time at your own pace. Career path Having this Data Protection (GDPR) Practitioner bundle course will increase the value of your CV and open you up to multiple job sectors: Data protection officer: £35,000 - £60,000 Information security manager: £40,000 - £70,000 Compliance manager: £45,000 - £80,000 Legal consultant: £50,000 - £90,000 Data analyst: £30,000 - £50,000 IT security analyst: £35,000 - £60,000 Certificates Certificate of completion Digital certificate - Included Certificate of completion Hard copy certificate - Included You will get the Hard Copy certificate for the title course (GDPR) absolutely Free! Other Hard Copy certificates are available for £10 each. Please Note: The delivery charge inside the UK is £3.99, and the international students must pay a £9.99 shipping cost.

Delivered Online On Demand

£39

General Data Protection Regulation (GDPR)

By Study Academy

Delve into the intricacies of data protection with this General Data Protection Regulation (GDPR)Â course. By the end of this comprehensive programme, you will master essential concepts and practices vital for safeguarding data in compliance with GDPR. You will gain a good understanding of personal and sensitive data, decipher GDPR obligations, and grasp the nuances of obtaining valid consent. You'll explore GDPRÂ data processing principles and dive into the rights of individuals, including 'subject access requests' and the right to erasure. Finally, you'll learn to differentiate between PECR and GDPR, identify organisational obligations, and comprehend the repercussions of data breaches.

Delivered Online On Demand1 hour

£30

General Data Protection Regulation Online Training Course

By Lead Academy

General Data Protection Regulation Training Course Overview Are you looking to begin your General Data Protection Regulation or GDPR career or want to develop more advanced skills in General Data Protection Regulation or GDPR? Then this general data protection regulation online training course will set you up with a solid foundation to become a confident data controller or data protection officer and help you to develop your expertise in General Data Protection Regulation or GDPR. This general data protection regulation online training course is accredited by the CPD UK & IPHM. CPD is globally recognised by employers, professional organisations and academic intuitions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. CPD certified certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Whether you are self-taught and you want to fill in the gaps for better efficiency and productivity, this general data protection regulation online training course will set you up with a solid foundation to become a confident data controller or data protection officer and develop more advanced skills. Gain the essential skills and knowledge you need to propel your career forward as a data controller or data protection officer. The general data protection regulation online training course will set you up with the appropriate skills and experience needed for the job and is ideal for both beginners and those currently working as a data controller or data protection officer. This comprehensive general data protection regulation online training course is the perfect way to kickstart your career in the field of General Data Protection Regulation or GDPR. This general data protection regulation online training course will give you a competitive advantage in your career, making you stand out from all other applicants and employees. If you're interested in working as a data controller or data protection officer or want to learn more skills on General Data Protection Regulation or GDPR but unsure of where to start, then this general data protection regulation online training course will set you up with a solid foundation to become a confident data controller or data protection officer and develop more advanced skills. As one of the leading course providers and most renowned e-learning specialists online, we're dedicated to giving you the best educational experience possible. This general data protection regulation online training course is crafted by industry expert, to enable you to learn quickly and efficiently, and at your own pace and convenience. Who should take this course? This comprehensive general data protection regulation online training course is suitable for anyone looking to improve their job prospects or aspiring to accelerate their career in this sector and want to gain in-depth knowledge of General Data Protection Regulation or GDPR. Entry Requirement There are no academic entry requirements for this general data protection regulation online training course, and it is open to students of all academic backgrounds. As long as you are aged seventeen or over and have a basic grasp of English, numeracy and ICT, you will be eligible to enrol. Method of Assessment On successful completion of the course, you will be required to sit an online multiple-choice assessment. The assessment will be evaluated automatically and the results will be given to you immediately. Career path This general data protection regulation online training course opens a brand new door for you to enter the relevant job market and also provides you with the chance to accumulate in-depth knowledge at the side of needed skills to become flourishing in no time. You will also be able to add your new skills to your CV, enhance your career and become more competitive in your chosen industry. Course Curriculum Introduction Trainer Introduction and Course Outline Why Data Protection. What Exactly is Why Deal with Data Protection Anyway. How is the Protection of Data Guaranteed. The Five Basic Principles of Data Protection Introduction Principle 1: Prohibition of Data Processing and Exceptions to Consent Principle 2: Purpose of Data Collection Principle 3: Data Collection Limits Principle 4: Data Security Principle 5: Transparency Summary The Foundations of Data Processing Introduction Data Processing with Consent Data Processing without Consent Rights of Data Subjects Rights of Data Subjects Responsibility of Data Controller or Processor Introduction Maintaining a Record of Processing Activities Technical and Organizational Measures (TOM) Data Processing Data Breaches Summary The Data Protection Officer The Data Protection Officer Summary Summary Recognised Accreditation CPD Certification Service This course is accredited by continuing professional development (CPD). CPD UK is globally recognised by employers, professional organisations, and academic institutions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. CPD certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Many organisations look for employees with CPD requirements, which means, that by doing this course, you would be a potential candidate in your respective field. Quality Licence Scheme Endorsed The Quality Licence Scheme is a brand of the Skills and Education Group, a leading national awarding organisation for providing high-quality vocational qualifications across a wide range of industries. It will give you a competitive advantage in your career, making you stand out from all other applicants and employees. Certificate of Achievement Endorsed Certificate from Quality Licence Scheme After successfully passing the MCQ exam you will be eligible to order the Endorsed Certificate by Quality Licence Scheme. The Quality Licence Scheme is a brand of the Skills and Education Group, a leading national awarding organisation for providing high-quality vocational qualifications across a wide range of industries. It will give you a competitive advantage in your career, making you stand out from all other applicants and employees. There is a Quality Licence Scheme endorsement fee to obtain an endorsed certificate which is Â£65. Certificate of Achievement from Lead Academy After successfully passing the MCQ exam you will be eligible to order your certificate of achievement as proof of your new skill. The certificate of achievement is an official credential that confirms that you successfully finished a course with Lead Academy. Certificate can be obtained in PDF version at a cost of Â£12, and there is an additional fee to obtain a printed copy certificate which is Â£35. FAQs Is CPD a recognised qualification in the UK? CPD is globally recognised by employers, professional organisations and academic intuitions, thus a certificate from CPD Certification Service creates value towards your professional goal and achievement. CPD-certified certificates are accepted by thousands of professional bodies and government regulators here in the UK and around the world. Are QLS courses recognised? Although QLS courses are not subject to Ofqual regulation, they must adhere to an extremely high level that is set and regulated independently across the globe. A course that has been approved by the Quality Licence Scheme simply indicates that it has been examined and evaluated in terms of quality and fulfils the predetermined quality standards. When will I receive my certificate? For CPD accredited PDF certificate it will take 24 hours, however for the hardcopy CPD certificate takes 5-7 business days and for the Quality License Scheme certificate it will take 7-9 business days. Can I pay by invoice? Yes, you can pay via Invoice or Purchase Order, please contact us at info@lead-academy.org for invoice payment. Can I pay via instalment? Yes, you can pay via instalments at checkout. How to take online classes from home? Our platform provides easy and comfortable access for all learners; all you need is a stable internet connection and a device such as a laptop, desktop PC, tablet, or mobile phone. The learning site is accessible 24/7, allowing you to take the course at your own pace while relaxing in the privacy of your home or workplace. Does age matter in online learning? No, there is no age limit for online learning. Online learning is accessible to people of all ages and requires no age-specific criteria to pursue a course of interest. As opposed to degrees pursued at university, online courses are designed to break the barriers of age limitation that aim to limit the learner's ability to learn new things, diversify their skills, and expand their horizons. When I will get the login details for my course? After successfully purchasing the course, you will receive an email within 24 hours with the login details of your course. Kindly check your inbox, junk or spam folder, or you can contact our client success team via info@lead-academy.org

General Data Protection Regulation Online Training Course

Delivered Online On Demand

£25

QLS Endorsed Level 2, 3 GDPR Training

By Imperial Academy

Level 3 QLS Endorsed Course with Certificate | CPD Accredited | 120 CPD Points | Lifetime Access

Delivered Online On Demand

£100

Geospatial Mapping Course

3.5(2)

By Elearncollege

Description Geospatial Mapping Diploma Introducing the Geospatial Mapping Diploma, a premium online course tailored for those eager to gain a deep understanding of the intricacies of geospatial science and its applications. As the world grows more interconnected and dependent on accurate geospatial data, the value of possessing the right knowledge and skills in this field becomes paramount. The Geospatial Mapping Diploma is meticulously designed to guide learners through a comprehensive exploration of the geospatial realm. From grasping the foundational concepts of geospatial science to delving into the latest trends and innovations, the course ensures a thorough, well-rounded experience. To begin with, learners are welcomed with an 'Introduction to Geospatial Science'. This module lays the groundwork, setting the stage for what promises to be an exciting educational journey. As participants progress, they'll be introduced to the core aspects of 'Geospatial Data Collection and Sources', helping them understand where and how geospatial data originates. No geospatial course would be complete without a thorough explanation of Geographic Information Systems (GIS). Hence, the 'Geographic Information Systems (GIS) Basics' module equips learners with the essential tools and knowledge required to navigate and utilise GIS platforms effectively. One of the most captivating sections of the Geospatial Mapping Diploma revolves around 'Remote Sensing Techniques'. Here, learners are shown the art and science of obtaining information about objects or areas from a distance, typically from aircraft or satellites. The course doesn't stop there. 'Digital Elevation Models and Terrain Analysis' provide insights into the world of topography and the significance of understanding terrain in geospatial analyses. This is closely followed by a module dedicated to 'Geospatial Data Processing and Analysis', ensuring learners are well-versed in handling, processing, and drawing meaningful conclusions from geospatial data. As we move into an era where the internet governs much of our activities, the importance of 'Web GIS and Geospatial Cloud Platforms' cannot be overstated. This module showcases how geospatial technologies have evolved to fit into our web-driven world, providing tools and platforms that are accessible and user-friendly. One of the standout features of the Geospatial Mapping Diploma is its emphasis on practical applications. This is evident in the modules 'Geospatial Technologies in Urban Planning' and 'Environmental and Conservation Applications'. Here, students can see the real-world implications and uses of their knowledge, from city planning to environmental conservation efforts. Finally, to ensure that learners are not just rooted in the present, the course concludes with 'Future Trends and Innovations in Geospatial Science'. This module paints a picture of what the future might hold, ensuring that graduates of the Geospatial Mapping Diploma are not only well-equipped for today but are also prepared for the advancements of tomorrow. In conclusion, the Geospatial Mapping Diploma offers an unparalleled online learning experience. Designed for both beginners and those with some prior knowledge, this course ensures a comprehensive grasp of geospatial science and its vast applications. Equip yourself with the skills and knowledge the future demands and embark on a journey of geospatial discovery today. What you will learn 1:Introduction to Geospatial Science 2:Geospatial Data Collection and Sources 3:Geographic Information Systems (GIS) Basics 4:Remote Sensing Techniques 5:Digital Elevation Models and Terrain Analysis 6:Geospatial Data Processing and Analysis 7:Web GIS and Geospatial Cloud Platforms 8:Geospatial Technologies in Urban Planning 9:Environmental and Conservation Applications 10:Future Trends and Innovations in Geospatial Science Course Outcomes After completing the course, you will receive a diploma certificate and an academic transcript from Elearn college. Assessment Each unit concludes with a multiple-choice examination. This exercise will help you recall the major aspects covered in the unit and help you ensure that you have not missed anything important in the unit. The results are readily available, which will help you see your mistakes and look at the topic once again. If the result is satisfactory, it is a green light for you to proceed to the next chapter. Accreditation Elearn College is a registered Ed-tech company under the UK Register of Learning( Ref No:10062668). After completing a course, you will be able to download the certificate and the transcript of the course from the website. For the learners who require a hard copy of the certificate and transcript, we will post it for them for an additional charge.

Delivered Online On Demand9 days

£99

GDPR : GDPR Training Course

By Training Tale

GDPR : GDPR Training Online Do you worry about how your business will comply with the General Data Protection Regulation (GDPR)? If so, you should take our GDPR course. The GDPR training will provide you with all the knowledge and abilities required to comprehend the GDPR field. Our GDPR training delves deep into the nuances of the GDPR to ensure that you comprehend and are able to implement its rules in practical situations. This GDPR course covers the law's obligations, the GDPR application framework, and data subjects' rights. Also, this GDPR instructs on how to communicate with the Supervisory Authorities, enforce the GDPR, and receive fines. This GDPR training also covers special data processing activities and the actual application of GDPR requirements. So, what are you waiting for? The best approach to make sure the organization is GDPR compliant is through our GDPR course. Main Course: GDPR Training Course Free Courses: Course 01: Level 5 Diploma in Cyber Security Course 02: Security Management Diploma Others Benefits of GDPR Training Course Free 03 PDF Certificate Expert Tutor Support Lifetime Access Unlimited Retake Exam [ Note: Free PDF certificate as soon as completing the GDPR Training course ] GDPR: GDPR Training Course Curriculum of GDPR Training Course Industry Experts Designed this GDPR Training course into 09 detailed modules. Module 1: Introduction and Checklist Module 2: Scope of Application of the GDPR Module 3: Organisational Requirements Module 4: Material Requirements Module 5: Rights of Data Subjects Module 6: Interaction with the Supervisory Authorities Module 7: Enforcement and Fines Under the GDPR Module 8: Special Data Processing Activities Module 9: Practical Implementation of the Requirements Under the GDPR Assessment Method of GDPR After completing each module of the GDPR Training Course, you will find automated MCQ quizzes. To unlock the next module, you need to complete the quiz task and get at least 60% marks. Certification of GDPR After completing the MCQ/Assignment assessment for this GDPR Training course, you will be entitled to a Certificate of Completion from Training Tale which is completely free to download. Who is this course for? GDPR : GDPR Training Everyone Requirements GDPR : GDPR Training There are no specific requirements for this GDPR Training course because it does not require any advanced knowledge or skills. Career path GDPR : GDPR Training

Delivered Online On Demand15 hours

£12

GDPR - CPD Certified

4.9(27)

By Apex Learning

The General Data Protection Regulation (GDPR) is a complex piece of legislation that can be difficult to understand. This GDPR bundle course will provide you with the scientific information you need to understand GDPR and its implications for your organization. Learning Outcomes of GDPR Bundle: Understand the key concepts of the GDPR Apply the GDPR to your organization's data processing practices Comply with the GDPR requirements Identify the lawful bases for processing personal data Understand the rights of data subjects Respond to data breaches Understand the responsibilities and obligations of data controllers and processors This GDPR Bundle Consists of the following Premium courses: Course 01: GDPR Course 02: Paralegal Law and Skills Course 03: Compliance Training Course 04: Cyber Security Incident Handling and Incident Response Course 05: Anti Money Laundering (AML) Regulation for AML Officers Course 06: Risk Management Course 07: CompTIA Networking Course 08: Decision Making Course 09: IT for Dummies Course 10: Leadership & Management Diploma Course 11: Time Management Sign up for this course today and start learning about the GDPR! Any business with customers in the EU must comply with GDPR. This GDPR bundle course will cover the key concepts of the GDPR, such as data protection principles, data subject rights, and lawful bases for processing personal data. You will also learn how to apply the GDPR to your organization's data processing practices and how to comply with its requirements. By the end of this GDPR bundle course, you will have the scientific information you need to comply with the GDPR and protect the personal data of your customers and employees. Key Features of This GDPR Course: This GDPR bundle is CPD QS Accredited Learn from anywhere in the world Lifetime access GDPR is entirely online 24/7 Learner support Course Curriculum of GDPR Bundle: Course 01: GDPR GDPR Basics GDPR Explained Lawful Basis for Preparation Rights and Breaches Responsibilities and Obligations =========>>>>> And 10 More Courses <<<<<========= How will I get my GDPR Certificate? After successfully completing the GDPR bundle course you will be able to order your CPD Accredited Certificates (PDF + Hard Copy) as proof of your achievement. PDF Certificate: Free (Previously it was £10 * 11 = £110) Hard Copy Certificate: Free (For The Title Course) P.S. The delivery charge inside the U.K. is £3.99 and international students have to pay £9.99. Enrol in this GDPR bundle course today and start your journey to a successful career! CPD 120 CPD hours / points Accredited by CPD Quality Standards Who is this course for? This GDPR Bundle Course is for: Data protection officers Compliance officers IT professionals Legal professionals Business owners Anyone who processes personal data Requirements No requirements to enrol on this GDPR bundle course. Career path Having this GDPR bundle course, will increase the value of your CV and open you up to multiple job sectors: Data protection officer: £40,000-£60,000 Compliance officer: £30,000-£50,000 Privacy Officer: £30,000-£50,000 Information security manager: £40,000-£60,000 Cybersecurity specialist: £50,000-£70,000 Data scientist: £40,000-£60,000 Certificates Certificate of completion Digital certificate - Included Certificate of completion Hard copy certificate - £9.99 You will get the Hard Copy certificate for the title course (GDPR) absolutely Free! Other Hard Copy certificates are available for £10 each. Please Note: The delivery charge inside the UK is £3.99, and international students must pay a £9.99 shipping cost

Delivered Online On Demand

£45

Show all 103

15 Educators providing Data Processing courses delivered On Demand

taleblazers

Torquay

packt

Birmingham

nexus human

London

compliance central

Luton

moderntronics

Harrow,

Courses matching "Data Processing"

GDPR - How to Apply the General Data Protection Regulation Trainning Online

By Study Plex

Data Protection

By RapidEDX

Real-Time Data Stream Processing in Azure

By Packt

Data Protection (GDPR) Practitioner

By Apex Learning

General Data Protection Regulation (GDPR)

By Study Academy

General Data Protection Regulation Online Training Course

By Lead Academy

QLS Endorsed Level 2, 3 GDPR Training

By Imperial Academy

Geospatial Mapping Course

By Elearncollege

GDPR : GDPR Training Course

By Training Tale

GDPR - CPD Certified

By Apex Learning