Name: Permanent Eyeliner | Fundamental Beginners PMU Training -Small Group Learning
Price: 2999 GBP
Availability: InStock

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course will provide a comprehensive understanding of the design of circulating fluidized bed (CFB) boilers. The design of all CFB boiler components and equipment including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves will be covered in detail. All potential operating problems and major operating problems, corrective actions and maintenance required for CFB boilers will be covered thoroughly.</p>
<p>This course will focus on designing CFB boilers that have the highest efficiency, and maximum longevity and capacity factor. All the common problems encountered in CFB Boilers will be discussed in detail.This includes thermally induced failures, anchor system induced failures, water walls tube failures, NMEJ damages, clinker formation, refractory damages, APH tube chock-up, erosion and corrosion. The solutions to each of these problems will be presented. All repair and refurbishment methods, preventive and predictive maintenance required for CFB boilers will be covered in-depth.</p>
<p>Several studies have confirmed that CFB boilers are the best method for power generation.This is due to their fuel flexibility, and lowest electricity cost among all types of boilers. This technology is in great demand due to various other advantages such as lower emissions as compared to other types of boilers and has a carbon footprint well below the norms laid down by the World Bank emission requirements.</p>
<p>This course is a MUST for anyone who is involved in the design, operation or maintenance of circulating fluidized bed boilers, because it covers how these boilers are designed and provides guidelines and rules that ensure the CFB boilers have great performance. This course will also provide up-dated information in respect to the design of supercritical once-through CFB boilers and ultra supercritical CFB boilers.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><span><strong>Circulating Fluidized Bed Boiler Design:</strong> </span><span>Gain a thorough understanding of the best design methods of circulating fluidized bed boilers.</span></li>
<li><span><strong>Design of Circulating Fluidized Bed Boiler:</strong> Components and Systems</span><span>: Learn</span> <span>all the techniques used to design CFB boiler equipment and systems including furnace, cyclones, economizers, superheaters, reheaters, loop seals, expansion joints, refractory, and L-valves.</span></li>
<li><strong><span>Design of Circulating Fluidized Bed Boiler to Achieve Highest Efficiency, and Best Performance and Economics</span></strong><span><strong>:</strong> Gain a thorough understanding of all the methods used to design CFB boilers having the highest efficiency, longevity and capacity factor as well as best economics.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Equipment:</span></strong><span> Learn about various equipment of circulating fluidized bed boilers including: furnaces, cyclones, economizers, superheaters, reheaters, ammonia injection systems, electrostatic precipitators, polishing dry scrubbers, fuel and sorbent feeding systems, bottom ash handling and extraction systems and materials.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Environmental Emissions:</span></strong><span> Learn about the monitoring and control of environmental emissions from circulating fluidized boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Instrumentation and Control Systems:</span></strong><span> Learn about the latest instrumentation and control systems of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Reliability and Testing:</span></strong><span> Increase your knowledge of predictive and preventive maintenance, reliability and testing of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Selection and Applications: </span></strong><span>Gain a detailed understanding of the selection considerations and applications of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Maintenance:</span></strong><span> Learn all the maintenance activities required for circulating fluidized bed boilers, to minimize their operating cost and maximize their efficiency, reliability, and longevity.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Refurbishment, and Life Extension Methods: </span></strong><span>Learn about life cycle cost, profitability, refurbishment, and life extension methods for all types of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Commissioning: </span></strong><span>Understand all the commissioning requirements of circulating fluidized bed boilers.</span></li>
<li><strong><span>Circulating Fluidized Bed Boiler Codes and Standards: </span></strong><span>Learn all the codes and standards applicable for circulating fluidized bed boilers.</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Design of Circulating Fluidized Bed Boiler manual (600 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

EnergyEdge - Training for a Sustainable Energy Future

Renewable Energy

Oil & Gas

Design Of Circulating Fluidized Bed Boilers

Team of 10, pp

Normal Fee, pp

<div>
</div>
<section>
<div>
<h2>About this training course</h2>
<p>This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of all electrical equipment including transformers, switchgear, induction and synchronous motors, generators and auxiliaries. All commissioning activities are covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, documentation, testing and commissioning schedules, test reports, safety, certification, and plant completion report. The course provides also a thorough understanding of all the commissioning requirements for transformers, switchgear, induction and synchronous motors and, generator and auxiliaries including its switchgear equipment, switchgear, and transformers.</p>
<p>All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures for every type of transformers, switchgear, induction and synchronous motors, and generators and auxiliary systems, instrumentation, trial run of the equipment, safety and precautions, commissioning of electrical systems, Safety Rules Clearance Certificates, procedure for the control and handling of defects, Commissioning Reports.</p>
<p>This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any electrical equipment because it provides detailed pre-commissioning checks and tests and detailed tests and commissioning procedures for every electrical equipment. In addition, the course provides in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each electrical equipment, safety and precautions, Safety Rules Clearance Certificates, Procedures for handling defects, and Commissioning Reports.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for all Electrical Equipment: </span></strong><span>Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for all electrical equipment</span></li>
<li><strong><span>Commissioning Procedures, Documents, and Certification of Electrical Equipment:</span></strong><span> Discover the benefits of the Commissioning Management System of electrical equipment including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, documentation, testing and commissioning schedules, test reports, safety, equipment certification, and commissioning completion report</span></li>
<li><span><strong>Commissioning Procedures for Transformers</strong>: </span><span>Learn about the commissioning procedures for transformers including functional checks, pre-commissioning tests, commissioning tests, and records.</span></li>
<li><strong><span>Commissioning Procedures for Switchgear Assemblies: </span></strong><span>Gain a thorough understanding of all the commissioning procedures for switchgear assemblies including substation commissioning, electrical testing, code requirements, safety rules, grounding and shorting, high power testing, NETA acceptance testing procedures, test values analysis, and commissioning forms</span></li>
<li><strong><span>Commissioning Procedures for Generator and Auxiliaries: </span></strong><span>Discover all the commissioning procedures for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and payment of generator</span></li>
<li><span><strong>Commissioning Procedures and Instructions for Generator Electrical Equipment:</strong> </span><span>Learn about all the commissioning procedures and instructions for generator electrical equipment including switchyard equipment, switchgear, transformers, and motors</span></li>
<li><strong><span>Code Requirements for Commissioning Electrical Equipment and Systems: </span></strong><span>Learn about the code requirements for commissioning transformers, switchgear, inductions and synchronous motors, and generators and auxiliaries</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>ELECTRICAL EQUIPMENT COMMISSIONING MANUAL (includes practical information about all pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for all electrical equipment - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Commissioning of Electrical Equipment

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Whether you are maintaining an oil rig or processing plant, good quality maintenance is critical to delivering a safe reliable product to your customers. Whatever your level of maintenance experience, this course will equip you with the valuable skills and understanding that will enhance your maintenance career.</p>
<p>Too often the maintenance department is seen as the cause of why assets are unavailable, in poor condition yet are costing too much to maintain. By comparison, pace setting companies see maintenance as adding value to their assets and employ an integrated, holistic approach to their maintenance activities. This course will help you move towards that pace setting performance.</p>
<p>This course is based on an integrated maintenance model that has been used by leading companies and consultants with success and recognised as best practice. Participants will learn the total impact that maintenance can have on a business, identify key elements (and value) of effective maintenance for their own plants to not only reduce costs but also improve performance. The critical types of maintenance will be covered from day-to-day activities to shutdowns and reliability improvement. The course will break down traditional functional boundaries and encourage a holistic approach to maintenance.</p>
<p>With an organisation's maintenance process only as good as its weakest link, this course will guide participants through all the key steps of a maintenance process and its supply chain. Participants will understand what is considered a good standard for each step in the maintenance process, how to identify the weakest links and subsequently how they can accelerate their performance improvement.</p>
<p><strong>Participants will have the option of gaining a Bronze Level qualification from the Academy of Turnarounds Operations of Maintenance. For those who obtain a pass, they will receive a Pass certificate and for those who achieve the top quartile score, they will receive a Distinction level pass.</strong></p>
<p>This course can also be offered through Virtual Instructor Led Training (VILT) format.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>By the end of the course, participants will be able to:</p>
<ul>
<li>Explain the challenges and objectives facing maintenance organisations today</li>
<li>Demonstrate the importance of work order systems and use techniques for time estimations and priority assignments</li>
<li>Prepare a preventive maintenance program</li>
<li>Apply project management techniques to effectively manage major maintenance activities and shut downs</li>
<li>Use capital budgeting techniques to evaluate maintenance capital expenditures</li>
<li>Demonstrate understanding of how to maintain the optimal stock levels of spare parts to ensure operational continuity</li>
<li>Prepare the right Key Performance Indicators (KPIs) to evaluate and improve performance in maintenance</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course is not just for maintenance professionals. Maintenance teams cannot perform without effective integration with operations and supply chain functions. Availability losses are often caused by operations or design issues and pace setting companies have generated significant benefits by integrating operation and maintenance strategies and working more collaboratively. This course will help all members of the operations and maintenance teams and their supply chain better understand their respective roles in ensuring that maintenance is benefitting and not inhibiting their business.</p>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a highly experienced facilitator in maintenance improvement, change management, continuous improvement and capability development as a management coach and trainer. He has a strong focus on people with an emphasis on developing people and the practicalities of improving maintenance performance rather than just the theory.</p>
<p>He has worked internationally across Europe, America, the Middle East and Africa with extensive experience in Oil and Gas, the Chemicals sector and manufacturing as well as working with clients in Steel and Power Generation. As a result, he can bring best practice from a wide variety of sources.</p>
<p>He spent the first fifteen years of his career as a specialist trainer working for companies such as Lloyds British Training Services and Rolls Royce. He then went on to work as a Principal consultant for ABB consulting for 15 years. During this time, he refined some of the established improvement tools including how and when to apply them for maximum impact whilst still continuing to develop and deliver training in support of this. Recent work has included improvements to the Work Order to Work Execution processes of Engineering departments and focused on Reliability, Planning and Scheduling. This ongoing field experience has helped him test and refine specialist training in a number of areas.</p>
<p>He has been able to use his own experience to contribute with other maintenance specialists to the Carcharodon models of excellence. Its methodologies are recognised as 'Best of the Best' standards providing the inspiration for two books, projects that have won awards such as the prodigious UK Chemical Industries annual Excellence in Engineering award and form the basis of this training.</p>
<p>He was recently awarded a national award as coach of the year. He uses the same skills to ensure that he does not just preach maintenance best practice, he discusses it, explains it and ensures that delegates have a much more personal and flexible experience.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Maintenance Planning, Scheduling & Control

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>The industry is surrounded with examples of poor Turnarounds, which have injured people and damaged businesses. If Turnarounds are not properly planned, managed and controlled, companies run the risks of serious safety and budget penalties, costly schedule delays and negative impacts on customers. As a consequence, operators are starting to explore Turnaround best practices and establish a more robust methodology.</p>
<p>Turnarounds are the highest risk activity that we routinely perform in the industry, but they are also an area of massive variability in approach and outcome. Central to the variability is a lack of written methodologies and training - there are around 1,000 times as many books on maintenance as there are on turnaround management. All too often companies see Turnarounds as something to be survived and therefore it is no surprise that most Turnarounds fail.</p>
<p>This 4 full-day course is based upon the Carcharodon 'Best of the Best' model of excellence for shutdown management with inputs from people who have done it from the trenches along with some of the world's most experienced shutdown specialists. All this experience has been condensed into a core methodology - our blueprint for success. It converts Turnarounds from a high-risk nuisance to a business opportunity. It has been used on multiple sites around the world, has been the basis of two books and is also supplemented by a roadmap for building and controlling a successful Turnaround.</p>
<p><strong>This is a certificate course where participants will have the option to participate for a short exam on the final day of the course to gain a <em>Certificate in Advanced Turnaround, Shutdown &amp; Outage Management </em>from petroEDGE and the Academy of Turnarounds Operations and Maintenance.</strong></p>
<p>The purpose of this course is to equip the participants on the use of the Model of Excellence for Turnarounds and the principles of Challenge Planning to equip attendees with an advanced approach to Turnaround Management. The course is backed by real situations, high levels of interaction, group exercises and multiple case studies. It will explore the underlying mechanisms and levers that shape a Turnaround to demonstrate why we sometimes succeed or fail and introduce new conceptual approaches that can increase our chances of succeeding.</p>
<p></p>
<p></p>
<p></p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<p>Upon completion of this course, the participants will be able to:</p>
<ul>
<li>Position Turnarounds as part of an overall strategy of improving business performance.</li>
<li>Build the best Turnaround team possible from available resources.</li>
<li>Help senior management build effective steering teams.</li>
<li>Reduce the downtime associated with turnarounds while simultaneously improving safety performance.</li>
<li>Use the Model of Excellence to analyse their own performance, explain key principles to others and build a detailed methodology of their own.</li>
<li>Maximise the benefits of planning and preparation through a proactive challenge planning process where the participants will build a Turnaround from the ground up from concept to execution and review.</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<p>This course has been researched and developed for Experienced Managers, Superintendents, Supervisors, Engineers, Planners, Team Leaders and Coordinators of:</p>
<ul>
<li>Shutdowns/Turnarounds</li>
<li>Maintenance</li>
<li>Engineering</li>
<li>Reliability</li>
<li>Plant</li>
<li>Outage</li>
<li>Asset Management</li>
<li>Operations/Audit</li>
<li>Safety</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your expert course leader is a highly experienced facilitator in maintenance improvement, change management, continuous improvement and capability development as a management coach and trainer. He has a strong focus on people with an emphasis on developing people and the practicalities of improving maintenance performance rather than just the theory.</p>
<p>He has worked internationally across Europe, America, the Middle East and Africa with extensive experience in Oil and Gas, the Chemicals sector and manufacturing as well as working with clients in Steel and Power Generation. As a result, he can bring best practice from a wide variety of sources.</p>
<p>He spent the first fifteen years of his career as a specialist trainer working for companies such as Lloyds British Training Services and Rolls Royce. He then went on to work as a Principal consultant for ABB consulting for 15 years. During this time, he refined some of the established improvement tools including how and when to apply them for maximum impact whilst still continuing to develop and deliver training in support of this. Recent work has included improvements to the Work Order to Work Execution processes of Engineering departments and focused on Reliability, Planning and Scheduling. This ongoing field experience has helped him test and refine specialist training in a number of areas.</p>
<p>He has been able to use his own experience to contribute with other maintenance specialists to the Carcharodon models of excellence. Its methodologies are recognised as 'Best of the Best' standards providing the inspiration for two books, projects that have won awards such as the prodigious UK Chemical Industries annual Excellence in Engineering award and form the basis of this training.</p>
<p>He was recently awarded a national award as coach of the year. He uses the same skills to ensure that he does not just preach maintenance best practice, he discusses it, explains it and ensures that delegates have a much more personal and flexible experience.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Advanced Turnaround, Shutdown and Outage Management

<section style="color: rgb(33, 37, 41); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(33, 37, 41);"><h2 style="color: rgb(62, 57, 52); box-sizing: border-box;" fr-original-style=" color: rgb(62, 57, 52);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">About this Training Course</strong></h2><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">There are various kinds of geophysical data available. They are separated into seismic and non-seismic (multi-physics) data. Non-seismic or multi-physics data (which includes gravity, magnetics, electrical, electromagnetics, spectral etc &ndash; apart from providing complimentary information to seismic) is the main source of information for very shallow subsurface applications such as engineering, mapping pollution, archaeology, geothermal energy, and related areas. This 5 full-day blended course will focus specifically on seismic data which is the main method used in the Oil &amp; Gas industry.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">In this blended course, participants will be equipped to understand that seismic data represents the movement of the surface, resulting from waves generated by a source, dynamite or vibrator which are reflected by changes in the subsurface rocks. The basic principles of acquisition and processing will be explained and insights into advanced methods, allowing a much more accurate interpretation of seismic data than previously considered possible, will also be provided.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This blended course contains an introduction to Machine Learning and its important role in all aspects of seismic acquisition, processing, and interpretation. There is no need to know in detail how the algorithms work internally but it is necessary to know how to use them correctly to achieve optimum results.</p><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><a href="https://petroedgeasia.net/training/fundamentals-of-seismic-for-non-geophysicists-classroom-training/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Download your brochure</a></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><a href="mailto:info@asiaedge.net?subject=Please Send me the Brochure for Fundamentals of Seismic for Non-Geophysicists" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Email me the brochure</a></p></section><section style="color: rgb(33, 37, 41); box-sizing: border-box;" fr-original-style=" color: rgb(33, 37, 41);"><a data-toggle="collapse" href="https://petroedgeasia.net/training/fundamentals-of-seismic-for-non-geophysicists-classroom-training/#collapseOne" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">TRAINING OBJECTIVES</strong></a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">By attending this course, participants will be able to acquire the following:</p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Obtain an understanding of the strengths and limitations of geophysical methods, specifically seismic, and the costs and risks involved, and how to reduce these.</li><li fr-original-style="" style="box-sizing: border-box;">Be able to communicate more effectively with staff in other disciplines.</li><li fr-original-style="" style="box-sizing: border-box;">Understand the potential applications of seismic data and know how to formulate the requirements needed for prospect and field evaluation.</li><li fr-original-style="" style="box-sizing: border-box;">Gain an awareness of modern seismic technology.</li><li fr-original-style="" style="box-sizing: border-box;">Apply the learning in a series of practical, illustrative exercises.</li><li fr-original-style="" style="box-sizing: border-box;">Know what types of questions to ask to assess the necessary quality of a seismic project in its role in a sequence of E&amp;P activities</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/fundamentals-of-seismic-for-non-geophysicists-classroom-training/#collapseTwo" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">TARGET AUDIENCE</strong></a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The blended course is intended for&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">non-geophysicists who have intensive interaction with geophysicists</strong>. But it may be of interest to those who want to know about the recent progress made in geophysics, leading to amazing imaging results, which could not be imagined a decade ago. The blended course will bring to the attention of the geologists, petrophysicists and reservoir/petroleum engineers an awareness of how the data they will work with is acquired and processed by the geophysicist. It will introduce the concepts that are of importance in geophysics and thus relevant for non-geophysicists to know and be able to communicate with geophysicists as well as formulate their requests.</p></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/fundamentals-of-seismic-for-non-geophysicists-classroom-training/#collapsecl" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">COURSE LEVEL</strong></a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Intermediate</li></ul></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/fundamentals-of-seismic-for-non-geophysicists-classroom-training/#collapseFive" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">TRAINER</strong></a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Your expert course leader has degree in Geology (University of Leiden), a Master&rsquo;s degree in Theoretical Geophysics (University of Utrecht) and a PhD in Utrecht on &ldquo;Full wave theory and the structure of the lower mantle&rdquo;. This involved forward modelling of P- and S-waves diffracted around the core-mantle boundary and comparison of the frequency-dependent attenuation of the signal with those obtained from major earthquakes observed at long offsets in the &ldquo;shadow zone&rdquo; of the core. These observations were then translated into rock properties of the D&rdquo; transition zone.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">After his PhD, he joined Shell Research in The Netherlands to develop methods to predict lithology and pore-fluid based on seismic, petrophysical and geological data. He subsequently worked for Shell in London to interpret seismic data from the Central North Sea Graben. As part of the Quantitative Interpretation assignment, he was also actively involved in managing, processing and interpreting Offshore Seismic Profiling experiments.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">After his return to The Netherlands, he headed a team for the development of 3D interpretation methods using multi-attribute statistical and pattern recognition analysis on workstations. After a period of Quality Assurance of &ldquo;Contractor&rdquo; software for seismic processing, he became responsible for Geophysics in the Shell Learning Centre. During that period, he was also a part-time professor in Applied Geophysics at the University of Utrecht.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">From 2001 to 2005, he worked on the development of Potential Field Methods (Gravity, Magnetics) for detecting oil and gas. Finally, he became a champion on the use of EM methods and became involved in designing acquisition, processing and interpretation methods for Marine Controlled Source EM (CSEM) methods.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">After his retirement from Shell, he founded his own company, specialising in courses on acquisition, processing and interpretation of geophysical data (seismic, gravity, magnetic and electromagnetic data), providing courses to International and National energy companies.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">In the last couple of years, he became keenly interested in the use of Machine Learning in Geophysics. Apart from incorporating &ldquo;Artificial Intelligence&rdquo; in his courses, he also developed a dedicated Machine Learning course for geophysics.</p></div><a data-toggle="collapse" href="https://petroedgeasia.net/training/fundamentals-of-seismic-for-non-geophysicists-classroom-training/#collapseCS" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);"></a></section><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><a href="https://petroedgeasia.net/training/fundamentals-of-seismic-for-non-geophysicists-classroom-training/" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Download your brochure</a></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><a href="mailto:info@asiaedge.net?subject=Please Send me the Brochure for Fundamentals of Seismic for Non-Geophysicists" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Email me the brochure</a></p><section style="color: rgb(33, 37, 41); box-sizing: border-box;" fr-original-style=" color: rgb(33, 37, 41);"><a data-toggle="collapse" href="https://petroedgeasia.net/training/fundamentals-of-seismic-for-non-geophysicists-classroom-training/#collapseCS" style="color: rgb(51, 51, 51); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(51, 51, 51);">POST TRAINING COACHING SUPPORT (OPTIONAL)</a><div data-parent="#accordion" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">To further optimise your learning experience from our courses, we also offer individualized &ldquo;One to One&rdquo; coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br fr-original-style="" style="box-sizing: border-box;"><a href="mailto:info@asiaedge.net?subject=Request%20for%20further%20information%20regarding%20post%20training%20coaching%20support" target="_blank" rel="noopener" style="color: rgb(0, 123, 255); user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;" fr-original-style=" color: rgb(0, 123, 255);">Request for further information post training support</a>&nbsp;and fees applicable</p></div></section>

Enhance your knowledge with our EnergyEdge course on Fundamentals of Seismic for Non-Geophysicists. Join us for classroom training to boost your expertise!

Fundamentals of Seismic for Non-Geophysicists

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>Identifying and correcting the root cause of failures in boilers and steam power plant equipment is essential to help reduce the chance of future problems. A comprehensive assessment is the most effective method of determining the root cause of a failure. For example, a tube failure in a boiler is usually a symptom of other problems. To fully understand the root cause of the failure, one must investigate all aspects of boiler operation leading to the failure in addition to evaluating the failure itself. When a boiler tube failure occurs, the root cause of the failure must be identified and eliminated.</p>
<p>This 5 full-day course starts by providing an in-depth understanding of root cause analysis methodology. This includes how to identify the problem, contain and analyze the problem, define the root cause of the problem, define and implement the actions required to eliminate the root cause, and validate that the corrective actions prevented recurrence of the problem. Many practical examples on how to apply root cause analysis for various industrial problems are discussed in detail.</p>
<p>The course then provides an in-depth explanation of all failure mechanisms that occur in steam power plants including corrosion, erosion, creep, cavitation, under-deposit attacks, stress corrosion cracking, hydrogen embrittlement, flow accelerated corrosion, etc. This course also provides a thorough explanation of all the failure mechanisms that occur in boilers and steam power plant equipment including steam turbines, condensers, feedwater heaters, etc. The symptoms of the failures, possible causes, components typically affected and solutions are also provided in this course. This includes boiler waterside, fireside and general boiler failure mechanisms as well as all the causes and prevention of all steam turbine failures, condensers, and feedwater heaters. The course also includes detailed study of many case histories of failures in boilers, steam turbines, condensers and feedwater heaters.</p>
<p></p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Electrical Equipment Testing and Maintenance: </span></strong><span>Gain a thorough understanding of all the testing and maintenance required for all key electrical equipment including transformers, inverters, rectifiers, switchgear and circuit breakers, relays and protective devices, cables and accessories, motors, variable frequency drives, uninterruptible power systems, generators, fuses, and industrial batteries</span></li>
<li><strong><span>Root Cause Analysis Methodology:</span></strong><span> Understand root cause analysis methodology including: identification of the problem, defining the problem, understanding the problem, identification of the root cause of the problem, providing corrective action, and monitoring the system.</span></li>
<li><strong><span>Applying the Root Cause Analysis Method to Industrial Problems:</span></strong><span> Learn by studying many practical examples how to apply the root cause analysis method to various industrial problems.</span></li>
<li><strong><span>Damage Mechanisms in Boilers and Steam Power Plant Equipment: </span></strong><span>Gain a thorough understanding of all the damage mechanisms that occur in boilers and all steam power plant equipment including turbines, condensers and feedwater heaters. These mechanisms include corrosion, erosion, flow accelerated corrosion, stress corrosion cracking, creep, under-deposit attack, cavitation, hydrogen embrittlement, etc.</span></li>
<li><strong><span>Symptoms of Failures in Boilers and Steam Power Plant Equipment, Possible Causes, Components Typically Affected, and Solutions:</span></strong><span> Learn about all the symptoms of failures in boilers and steam power plant equipment including steam turbines, condensers, and feedwater heaters, their possible causes, components typically affected and proven solutions.</span></li>
<li><strong><span>Case Histories of Failures in Boilers, Steam Turbines, Condensers, and Feedwater Heaters:</span></strong><span> Learn by studying many case histories how failures occur in boilers, steam turbines, condensers, and feedwater heaters and the corrective actions taken to deal with them</span></li>
</ul>
<p> </p>
<p> </p>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals (this seminar is suitable for individuals who do not have an electrical background)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>Excerpt of the relevant chapters from the 'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2011 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>ROOT CAUSE ANALYSIS FOR BOILERS AND STEAM CYCLE FAILURES MANUAL (includes practical information and case histories - 500 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Root Cause Analysis for Boilers and Steam Cycle Failures

<div>
</div>
<section>
<div>
<h2><strong>About this Training Course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVRs), governing systems, and protective systems.</p>
<p>The focus will be on maximizing the efficiency, reliability and longevity of these equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance.</p>
<p>The emphasis of this course is on protective systems, inspection methods, diagnostic testing, troubleshooting, modern maintenance techniques, refurbishment, rewind and upgrade options, as well as advanced methods for preventing partial discharge and other failures.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong>Equipment Operation:</strong> Gain a thorough understanding of the operating characteristics of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Diagnostics and Inspection:</strong> Learn in detail all the diagnostic techniques and inspections required of critical components of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Testing:</strong> Understand thoroughly all the tests required for the various types of generators, exciters, AVR's and protective systems</li>
<li><strong>Electrical Generator Protective Systems:</strong> Gain a thorough understanding of all Electrical generator protective systems including: all electrical relays, tripping mechanisms, protective systems for negative phase sequence (unbalance loading), loss of excitation, over fluxing protection (over-voltage and underfrequency), reverse power (generator monitoring), over-speeding, pole slipping / out of step (sudden increase in torque or weakness in excitation), Class A protection, Class B protection</li>
<li><strong>Equipment Maintenance and Troubleshooting:</strong> Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Repair and Refurbishment:</strong> Gain a detailed understanding of the various methods used to repair and refurbish generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Rewind and Upgrade Options:</strong> Discover all options available to rewind and upgrade the generator rotor and stator to enhance the output and reduce downtime</li>
<li><strong>Efficiency, Reliability, and Longevity:</strong> Learn the various methods used to maximize the efficiency, reliability, and longevity of generators, exciters, AVR's and protective systems</li>
<li><strong>Advanced Methods to Prevent Failure:</strong> Gain a thorough understanding of all the methods used to prevent partial discharge, and other failures in generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Sizing:</strong> Gain a detailed understanding of all the calculations and sizing techniques used for generators, exciters, AVR's and protective systems</li>
<li><strong>Design Features:</strong> Understand all the design features that improve the efficiency, reliability of generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Selection:</strong> Learn how to select generators, exciters, AVR's and protective systems by using the performance characteristics and selection criteria that you will learn in this course</li>
<li><strong>Equipment Enclosures and Sealing Methods:</strong> Learn about the various types of enclosures and sealing arrangements used for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Commissioning:</strong> Understand all the commissioning requirements for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Codes and Standards:</strong> Learn all the codes and standards applicable for generators, exciters, AVR's and protective systems</li>
<li><strong>Equipment Causes and Modes of Failures:</strong> Understand causes and modes of failures of generators, exciters, AVR's and protective systems</li>
<li><strong>System Design:</strong> Learn all the requirements for designing different types of generators, exciters, AVR's and protective systems</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li>Engineers of all disciplines</li>
<li>Managers</li>
<li>Technicians</li>
<li>Maintenance personnel</li>
<li>Other technical individuals</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Course Level 

</div>
<div id="collapsecl">
<div>
<ul>
<li>Basic or Foundation</li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>ELECTRICAL EQUIPMENT HANDBOOK' published by McGraw-Hill in 2003 (600 pages)</span></li>
<li><span>Generator Inspection, Testing, Maintenance, Protective Systems and Refurbishment Manual (this manual covers all the inspection and maintenance activities as well as all protective systems required for generators - 400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.</p>
<p>While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.</p>
<p>Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.</p>
<p>In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures.</p>
<p>He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Electrical Generators, Excitation Systems and Governing Systems

<div>
</div>
<section>
<div>
<h2><strong>About this training course</strong></h2>
<p>This 5 full-day course provides a comprehensive understanding of all the commissioning and start-up activities of circulating fluidized bed (CFB) boiler coal power plants. The Commissioning Management System of CFB boiler coal power plants is covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report.</p>
<p>The course provides also a thorough understanding of all the commissioning requirements for CFB boiler and auxiliaries, turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear, and transformers. All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a coal power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of CFB boiler coal power plant systems, Safety Rules Clearance Certificates, procedure for the control and handling of defects, Commissioning Reports.</p>
<p>This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any CFB boiler coal power plant equipment because it provides detailed pre-commissioning checks and detailed tests and commissioning procedures and instructions for every component in a CFB boiler coal power plant.</p>
<p>In addition, the course provides in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each CFB boiler coal power plant equipment, safety and precautions, Safety Rules Clearance Certificates, Procedures for handling defects, and Commissioning Reports.</p>
</div>
</section>
<section>
<div id="accordion">
<div>
<div>

Training Objectives 

</div>
<div id="collapseOne">
<div>
<ul>
<li><strong><span>Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in CFB Boiler Coal Power Plants:</span></strong><span> Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in CFB boiler coal power plants</span></li>
<li><strong><span>Commissioning Management System of CFB Boiler Coal Power Plants:</span></strong><span> Discover the benefits of the Commissioning Management System of CFB boiler coal power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report</span></li>
<li><strong><span>Commissioning Procedures and Instructions for CFB Boiler and Auxiliaries in Coal Power Plants:</span></strong><span> Learn about the commissioning procedures and instructions for CFB boiler and auxiliaries including all commissioning activities, typical commissioning schedule, hydraulic test and wet preservation, air and gas tightness test, trial run of equipment, electronic precipitators, fuel oil system, preparation for first light up, alkali boil - out, acid cleaning and passivation, thermal flow test of economizer, water walls, and superheater, valves, steam boiling, and safety valve setting</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Turbine and Auxiliaries:</span></strong><span> Gain a thorough understanding of all the commissioning procedures and instructions for turbine and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Generator and Auxiliaries:</span></strong><span> Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and payment of generator</span></li>
<li><strong><span>Commissioning Procedures and Instructions for Electrical Equipment: </span></strong><span>Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers, and motors</span></li>
<li><strong><span>CFB Boiler Coal Power Plant Equipment and Systems:</span></strong><span> Learn about various CFB boiler coal power plant equipment and systems including: CFB boilers, superheaters, reheaters, steam turbines, governing systems, deaerators, feedwater heaters, coal-handling equipment, transformers, generators and auxiliaries</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Target Audience 

</div>
<div id="collapseTwo">
<div>
<ul>
<li><span>Engineers of all disciplines</span></li>
<li><span>Managers</span></li>
<li><span>Technicians</span></li>
<li><span>Maintenance personnel</span></li>
<li><span>Other technical individuals</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Training Methods 

</div>
<div id="collapseThree">
<div>
<p><span>Your specialist course leader relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.</span></p>
<p><span>Each delegate will receive a copy of the following materials written by the instructor:</span></p>
<ul>
<li><span>'POWER GENERATION HANDBOOK' second edition published by McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>Excerpt of the relevant chapters from the 'POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE' published by</span> <span>McGraw-Hill in 2012 (800 pages)</span></li>
<li><span>CFB BOILER COAL POWER PLANT COMMISSIONING MANUAL (includes practical information about all pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component and system in CFB boiler coal power plants - 400 pages)</span></li>
</ul>
</div>
</div>
</div>
<div>
<div>

Trainer

</div>
<div id="collapseFive">
<div>
<p>Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;</p>
<ul>
<li>Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.</li>
<li>Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.</li>
<li>Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.</li>
<li>Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).</li>
<li>Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).</li>
</ul>
<p>Furthermore, he has received the following awards:</p>
<ul>
<li>The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016</li>
<li>The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996).</li>
<li>The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).</li>
<li>Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983).</li>
</ul>
<p>Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.</p>
</div>
</div>
</div>
<div>
<div>

POST TRAINING COACHING SUPPORT (OPTIONAL)

</div>
<div id="collapseCS">
<div>
<p>To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster.<br />
Request for further information post training support and fees applicable</p>
</div>
</div>
</div>
<div>
<div>

Accreditions And Affliations

</div>
<div id="collapseSeven">
<div>
               </div>
</div>
</div>
</div>
</section>

Commissioning and Start-Up Activities of Coal Power Plants

Orpington

<p>Cosmetic College is excited to introduce our new combined training package, designed to provide in-depth expertise in two of the most sought-after cosmetic procedures: microblading and micropigmentation. This unique program combines our VTCT Level 4 Certificate courses in Enhancing Eyebrows with Microblading Techniques and in Micropigmentation, offering a holistic approach to advanced cosmetic training.</p><p><strong>Course Details:</strong></p><ol><li><b>VTCT Level 4 Certificate in Enhancing Eyebrows with Microblading Techniques</b><ul><b>Duration</b>: 3 days<b>Content Overview</b>:<ul>Anatomy and physiology for microblading techniques.Health, safety, and hygiene for the microblading sector.Consultation, treatment planning, and preparation.Enhancing eyebrows with microblading techniques.Managing and marketing your microblading business.</ul></ul></li><li><b>VTCT Level 4 Certificate in Micropigmentation</b><ul><b>Duration</b>: [Specify Duration]<b>Content Overview</b>:<ul>Advanced techniques in micropigmentation.Comprehensive understanding of color theory and pigment selection.Skin anatomy and physiology relevant to micropigmentation.Health, safety, and hygiene standards for micropigmentation.Client consultation, design, and aftercare procedures.</ul></ul></li></ol><h4><strong>Combined Package Benefits:</strong></h4><ul><li><b>Comprehensive Skill Set: </b>Gain expertise in both microblading and micropigmentation, enhancing your versatility and employability in the beauty industry.</li><li><b>Cost-Effective Learning</b>: Enroll in both courses at a reduced total cost compared to taking the courses separately.</li><li><b>Integrated Curriculum</b>: Experience a curriculum that seamlessly integrates the knowledge and skills from both courses, providing a cohesive learning journey.</li><li><b>Expert Instructors</b>: Learn from industry experts with extensive experience in cosmetic procedures.</li><li><b>Certification and Recognition: </b>Upon successful completion, receive two VTCT Level 4 Certificates, recognised internationally for their high standards in the beauty sector.</li></ul><h6><strong>Who Should Enrol?</strong></h6><p>This package is ideal for beauty professionals looking to expand their service offerings, individuals seeking a career in advanced cosmetic procedures, and those aspiring to become experts in eyebrow enhancement and skin pigmentation techniques.</p>

Cosmetic College

Aesthetic Practitioner

Facial Aesthetics

VTCT Level 4 Micropigmentation & Microblading Training Package

General Admission

London

<h5 style="color: rgb(83, 82, 80); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(83, 82, 80);">A BEAUTIFUL EYELASH ENHANCER (ALSO KNOWN AS A LASH DEFINER) IS A FINE EYELINER THAT WILL GIVE THE IMPRESSION OF A THICKER, DARKER ROW OF LASHES AND ADD MORE DEFINITION TO THE EYES.</h5><p style="color: rgb(83, 82, 80); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(83, 82, 80);">The objective of the<a href="https://shop.traciegiles.co.uk/products/eyeliner-tattoo-training" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; text-decoration: inherit; cursor: pointer;"> ID Liner Permanent Eyeliner fundamental course</a> is to teach you how to achieve this look for your clients.</p><p style="color: rgb(83, 82, 80); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(83, 82, 80);">It is the perfect solution for clients who struggle to draw on their own eyeliner or who just want an expertly enhanced look 24/7.</p><p style="color: rgb(83, 82, 80); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(83, 82, 80);">With extremely subtle results, this is a great treatment choice for clients new to the world of Permanent Makeup and an easy up-sell for your existing brow or lip clients.&nbsp;</p><p style="color: rgb(83, 82, 80); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(83, 82, 80);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">COURSE STRUCTURE:</strong></p><ul style="color: rgb(83, 82, 80); box-sizing: border-box;" fr-original-style=" color: rgb(83, 82, 80);"><li fr-original-style="" style="box-sizing: border-box;">40 hours at home pre-study</li><li fr-original-style="" style="box-sizing: border-box;">1 virtual theory day &amp; 2 days in-house training</li><li fr-original-style="" style="box-sizing: border-box;">Written assessment based on pre-study</li><li fr-original-style="" style="box-sizing: border-box;">Written homework plus template and mat practise</li><li fr-original-style="" style="box-sizing: border-box;">Case studies to be submitted in order to gain Bronze Artist Certificate of Completion</li></ul><p style="color: rgb(83, 82, 80); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(83, 82, 80);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">WHAT&rsquo;S INCLUDED:&nbsp;</strong></p><ul style="color: rgb(83, 82, 80); box-sizing: border-box;" fr-original-style=" color: rgb(83, 82, 80);"><li fr-original-style="" style="box-sizing: border-box;">Stylish portable carry case packed with <a title="Defenderr Tattooing Device" href="https://shop.traciegiles.co.uk/collections/defenderr-handpieces" data-mce-fragment="1" data-mce-href="https://shop.traciegiles.co.uk/collections/defenderr-handpieces" target="_blank" style="color: var(--link-color); user-select: auto; font-size: var(--font-size); box-sizing: border-box; text-decoration: inherit; cursor: pointer;" fr-original-style=" color: var(--link-color);">Defenderr Handpiece</a><span data-mce-fragment="1" fr-original-style="" style="box-sizing: border-box;">, Power Supply,&nbsp;</span><a title="Permanent Makeup Needles Defenderr" href="https://shop.traciegiles.co.uk/collections/defenderr-cartridge-needles" data-mce-fragment="1" data-mce-href="https://shop.traciegiles.co.uk/collections/defenderr-cartridge-needles" style="color: var(--link-color); user-select: auto; font-size: var(--font-size); box-sizing: border-box; text-decoration: inherit; cursor: pointer;" fr-original-style=" color: var(--link-color);">Needles</a><span data-mce-fragment="1" fr-original-style="" style="box-sizing: border-box;">,&nbsp;</span><a title="Eyeliner PMU Pigments" href="https://shop.traciegiles.co.uk/collections/eyeliner-pigments-permanent-makeup-pigments" target="_blank" style="color: var(--link-color); user-select: auto; font-size: var(--font-size); box-sizing: border-box; text-decoration: inherit; cursor: pointer;" fr-original-style=" color: var(--link-color);">Eyeliner Pigments</a>,&nbsp;<a title="Pre-Draw Pencils" href="https://shop.traciegiles.co.uk/collections/pmu-pencils" target="_blank" style="color: var(--link-color); user-select: auto; font-size: var(--font-size); box-sizing: border-box; text-decoration: inherit; cursor: pointer;" fr-original-style=" color: var(--link-color);">Pre-Draw Pencils</a> &amp; <a title="Green Soap" href="https://shop.traciegiles.co.uk/products/permanent-makeup-pigment-cleanser" target="_blank" style="color: var(--link-color); user-select: auto; font-size: var(--font-size); box-sizing: border-box; text-decoration: inherit; cursor: pointer;" fr-original-style=" color: var(--link-color);">Pigment Cleanser</a></li><li fr-original-style="" style="box-sizing: border-box;">Latex Skins</li><li fr-original-style="" style="box-sizing: border-box;"><a title="Apron" href="https://shop.traciegiles.co.uk/collections/pmu-accessories/products/permanent-makeup-artist-apron" target="_blank" style="color: var(--link-color); user-select: auto; font-size: var(--font-size); box-sizing: border-box; text-decoration: inherit; cursor: pointer;" fr-original-style=" color: var(--link-color);">ID Liner branded apron</a>, towels and marketing materials to promote your business</li><li fr-original-style="" style="box-sizing: border-box;">Models supplied for training days</li><li fr-original-style="" style="box-sizing: border-box;">Fully comprehensive training manual (including VTCT Level 4 content)</li><li fr-original-style="" style="box-sizing: border-box;">Workbook</li></ul><p style="color: rgb(83, 82, 80); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(83, 82, 80);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">STUDENTS WILL LEARN:</strong></p><ul style="color: rgb(83, 82, 80); box-sizing: border-box;" fr-original-style=" color: rgb(83, 82, 80);"><li fr-original-style="" style="box-sizing: border-box;">Fundamental Cosmetic Tattooing theory including but not limited to Health and Safety, Colour Theory, Client Suitability, Consent, Anatomy &amp; Physiology, Treatments and Tools</li><li fr-original-style="" style="box-sizing: border-box;">Pre-drawing</li><li fr-original-style="" style="box-sizing: border-box;">Pigment Chemistry: Oxides vs Carbon for Eyeliners</li><li fr-original-style="" style="box-sizing: border-box;">Eyelash definer technique on latex and later on skin</li><li fr-original-style="" style="box-sizing: border-box;">To understand safe and acceptable treatment protocols</li><li fr-original-style="" style="box-sizing: border-box;">To understand the entire Eyeliner treatment process including aftercare and retouch appointments<br fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></li></ul><p style="color: rgb(83, 82, 80); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(83, 82, 80);"><a title="Learn Whipshaded Eyeliner" href="https://shop.traciegiles.co.uk/collections/world-master-series-pmu-masterclasses/products/misted-eyeliner-masterclass" target="_blank" style="color: var(--link-color); user-select: auto; font-size: var(--font-size); box-sizing: border-box; text-decoration: inherit; cursor: pointer;" fr-original-style=" color: var(--link-color);">Masterclasses</a>&nbsp;and&nbsp;<a title="Intermediate Permanent Makeup Training" href="https://shop.traciegiles.co.uk/collections/intermediate-micropigmentation-training/products/skill-up-pmu-training" style="color: var(--link-color); user-select: auto; font-size: var(--font-size); box-sizing: border-box; text-decoration: inherit; cursor: pointer;" fr-original-style=" color: var(--link-color);">Skill Up&nbsp;Training</a> available at an additional cost to ID Liner Bronze Artists wanting to learn advanced techniques such as thick winged eyeliners and whipshaded eyeliners.</p><p style="color: rgb(83, 82, 80); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(83, 82, 80);"><em fr-original-style="" style="box-sizing: border-box;">Training only options also available (without kit included). Please&nbsp;<a href="https://shop.traciegiles.co.uk/pages/contact-the-id-liner-training-team" title="Contact ID Liner Training" style="color: var(--link-color); user-select: auto; font-size: var(--font-size); box-sizing: border-box; text-decoration: inherit; cursor: pointer;" fr-original-style=" color: var(--link-color);">contact us</a>&nbsp;for prices &amp; availability.</em></p>

ID Liner | Permanent Makeup Training & Supplies

Eyeliner

Tattoo

The objective of the ID Liner Permanent Eyeliner fundamental course is to teach you how to achieve this look for your clients.
It is the perfect solution for clients who struggle to draw on their own eyeliner or who just want an expertly enhanced look 24/7

Permanent Eyeliner | Fundamental Beginners PMU Training -Small Group Learning

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;">This live virtual <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(44, 130, 201); box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201);">Agility in HR (ICP-AHR) Training &amp; Certification Program</span></strong> enables the participants to learn:</span></p><ol fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;">How to <u fr-original-style="" style="box-sizing: border-box;">adopt and apply agile principles, values, and methodologies within the HR department</u> itself &ndash; <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;">&ldquo;<span style="color: rgb(147, 101, 184); box-sizing: border-box;" fr-original-style="color: rgb(147, 101, 184);">Agile for HR</span>.&rdquo;</em></strong> &ndash; and</li><li style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;">The <u fr-original-style="" style="box-sizing: border-box;">role of HR in facilitating and supporting the adoption of Agile practices and principles across the organization</u> &ndash; <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;">&ldquo;<span style="color: rgb(147, 101, 184); box-sizing: border-box;" fr-original-style="color: rgb(147, 101, 184);">HR for Agile</span>.&rdquo;</em></strong></li></ol><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;">During this&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(44, 130, 201); box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201);">live-immersive interactive workshop</span></strong>, participants will learn&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">essential concepts</strong>&nbsp;related to&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;">&ldquo;Agile for HR&rdquo;</em></strong>&nbsp;through&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(243, 121, 52); box-sizing: border-box;" fr-original-style="color: rgb(243, 121, 52);">practical, easy-to-follow, hands-on exercises</span></strong>. By actively participating, attendees will develop a comprehensive understanding of:</span></p><ol fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Agile HR processes:</strong>&nbsp;adopting iterative and incremental approaches to HR processes like performance management, recruitment, and onboarding.</li><li style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Agile HR project management:</strong>&nbsp;This involves using Agile project management frameworks (e.g., Scrum or Kanban) to manage HR initiatives.</li><li style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Cross-functional collaboration:</strong>&nbsp;Promoting collaboration between HR and other departments using Agile principles, such as self-organizing teams and regular feedback loops.</li></ol><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;">Throughout the course, participants will&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">acquire knowledge</strong>&nbsp;on&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;">&ldquo;HR for Agile&rdquo;</em></strong>&nbsp;and&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(243, 121, 52); box-sizing: border-box;" fr-original-style="color: rgb(243, 121, 52);">gain the ability to facilitate and support agile transformation within their organization</span></strong>. The training program includes&nbsp;<strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(243, 121, 52); box-sizing: border-box;" fr-original-style="color: rgb(243, 121, 52);">relevant case studies, useful tools, and effective techniques related to</span>:</strong></span></p><ol fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Agile talent acquisition:</strong>&nbsp;Implementing recruitment strategies prioritizing individuals with an Agile mindset and values.</li><li style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Agile performance management:</strong>&nbsp;shifting to Agile-friendly approaches such as continuous feedback and frequent check-ins.</li><li style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Agile Learning and Development:</strong>&nbsp;Providing training programs that equip employees with Agile skills and mindsets.</li><li style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Agile organizational design:</strong>&nbsp;collaborating on restructuring the organization to support Agile practices like cross-functional teams and autonomy.</li></ol><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(65, 168, 95); box-sizing: border-box;" fr-original-style="color: rgb(65, 168, 95);">Bonus Module:</span></strong><span style="color: rgb(65, 168, 95); box-sizing: border-box;" fr-original-style="color: rgb(65, 168, 95);"> </span><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><em fr-original-style="" style="box-sizing: border-box;"><span style="color: rgb(65, 168, 95); box-sizing: border-box;" fr-original-style="color: rgb(65, 168, 95);"><u fr-original-style="" style="box-sizing: border-box;">Enhancing HR Agility with AI &amp; Analytics:</u></span>&nbsp;</em></strong>This module explores the integration of AI and analytics to revolutionize HR practices, aligning them with agile principles. Participants will learn how these technologies can automate tasks, enhance decision-making, and support agile transformations across the organization. Through focused examples, the session highlights the impact on recruitment, performance management, and overall HR efficiency, offering a forward-looking approach to agile HR management.</span></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;">This course will be delivered through <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(44, 130, 201); box-sizing: border-box;" fr-original-style="color: rgb(44, 130, 201);">live virtual sessions via Zoom</span></strong>. There are the following dates on which you can opt for this course:</span></p><ol fr-original-style="" style="box-sizing: border-box;"><li id="isPasted" style="font-size: 14px; color: rgb(44, 130, 201); box-sizing: border-box;" fr-original-style="font-size: 14px; color: rgb(44, 130, 201);">Agile HR | 29-30 Apr | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="font-size: 14px; color: rgb(44, 130, 201); box-sizing: border-box;" fr-original-style="font-size: 14px; color: rgb(44, 130, 201);">Agile HR | 3-4 Jun | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="font-size: 14px; color: rgb(44, 130, 201); box-sizing: border-box;" fr-original-style="font-size: 14px; color: rgb(44, 130, 201);">Agile HR | 1-2 Aug | 9 am - 5 pm BST | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li><li style="font-size: 14px; color: rgb(44, 130, 201); box-sizing: border-box;" fr-original-style="font-size: 14px; color: rgb(44, 130, 201);">Agile HR | 30-31 Oct | 9 am - 5 pm GMT | Weekday | 2 days - 8 hrs/day | Best for UK / Europe</li></ol><div fr-original-style="" style="box-sizing: border-box;"><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;">The following are the links to the<span style="color: rgb(243, 121, 52); box-sizing: border-box;" fr-original-style="color: rgb(243, 121, 52);"> <u fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">essential documents</strong></u></span> that will help you make an informed decision:<br fr-original-style="" style="box-sizing: border-box;"></span></div><ol fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><div fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Detailed <span style="color: rgb(243, 121, 52); box-sizing: border-box;" fr-original-style="color: rgb(243, 121, 52);">course brochure</span>: </strong><a href="https://drive.google.com/file/d/1PARAqO_uN8WLtXb8e6OKoawB60afNwJ_/view?usp=drive_link" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(147, 101, 184); box-sizing: border-box;" fr-original-style="color: rgb(147, 101, 184);">Click Here</span></strong></a><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&nbsp;or download via the link below:&nbsp;</strong></div></li></ol><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><div fr-original-style="" style="box-sizing: border-box;"><a href="https://drive.google.com/file/d/1PARAqO_uN8WLtXb8e6OKoawB60afNwJ_/view?usp=drive_link" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;">https://drive.google.com/file/d/1PARAqO_uN8WLtXb8e6OKoawB60afNwJ_/view?usp=drive_link</span></a><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(0, 0, 0); font-size: 14px; box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(0, 0, 0); font-size: 14px;">&nbsp;</span></strong></div></li></ul><ol fr-original-style="" style="box-sizing: border-box;"><li style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;"><div fr-original-style="" style="box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(243, 121, 52); box-sizing: border-box;" fr-original-style="color: rgb(243, 121, 52);">Testimonials</span> from global HR professionals: </strong><a href="https://drive.google.com/file/d/1wYNCJAMiNQeeihcluQEY5JdBkjgYtW6S/view?usp=drive_link" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><span style="color: rgb(147, 101, 184); box-sizing: border-box;" fr-original-style="color: rgb(147, 101, 184);">Click Here</span></strong></a><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&nbsp;or download via the link below:&nbsp;</strong></div></li></ol><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><div fr-original-style="" style="box-sizing: border-box;"><a href="https://drive.google.com/file/d/1wYNCJAMiNQeeihcluQEY5JdBkjgYtW6S/view?usp=drive_link" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;"><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;">https://drive.google.com/file/d/1wYNCJAMiNQeeihcluQEY5JdBkjgYtW6S/view?usp=drive_link</span></a><span style="font-size: 14px; box-sizing: border-box;" fr-original-style="font-size: 14px;">&nbsp;</span></div></li></ul>

ValueX2

https://www.valuex2.com/agile-hr-certification/
https://www.linkedin.com/company/80563537/

ICAgile's Agility in HR (ICP-AHR) Training & Certification Program by ValueX2 | 2 days - 8 hrs/day | 9 am - 5 pm UK Time

<p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">This driver CPC course Rules of The Road &amp; Fuel-Efficient Driving is suitable for LGV &amp; PCV and will cover:</strong></p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">Requirements, Speed Limits, SMART Motorways, Highway Code, Road Signs, Bridge Strikes, Mobile Phones, Sat-Navs, Traffic Accident Procedure, Benefits of Fuel-Efficient Driving, Fuels and Fluids, Use of Vehicles,&nbsp;Other Factors,&nbsp;Driving Safely and Fuel Efficiently.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">All courses start at 07:45 hrs and finish at 15:45 hrs</strong></p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.</strong></p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Approval:</strong> This course is registered with JAUPT as approved for Driver CPC qualification.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">Course Approval Number: CRS18242/475.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">On completion of the course all attendees will receive certificate of attendance.</p><p style="color: rgb(26, 26, 26); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(26, 26, 26);">Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.</p>

This driver CPC course Vulnerable Road Users is suitable for LGV & PCV and will cover:
Where Do We Encounter VRU’s? Who Are the VRU’s? Sharing Road Space, Route Planning, New Traffic Systems, Professional Drivers Role, Hazard Perception, Defensive Driving, Blindspots, Vehicle Safety Systems, Cyclists, Pedestrians, Motorcyclists, Horse Riders
All courses start at 07:45 hrs and finish at 15:45 hrs
All courses are 8 hours long with included 2 breaks of 15 minutes and a lunch break of 30 minutes.
Approval: This course is registered with JAUPT as approved for Driver CPC qualification.
Course Approval Number: CRS5814/475.
On completion of the course all attendees will receive certificate of attendance.
Please note repeat courses are not accepted by DVSA and by joining this course you confirm that you are aware of the modules covered by you and certify that, if you have covered these before you are happy to repeat the modules due to needing further education on the subject.

PETM

Road Safety

Driver CPC

Vulnerable Road Users - Online

<h1 id="isPasted" style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Online MHFA England Adult Mental Health First Aid Course.&nbsp;</h1><div fr-original-style="" style="box-sizing: border-box;"><a href="https://www.mindmapswellbeing.com/brochure-request/" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">Download brochure for course details here.</a><a href="https://www.mindmapswellbeing.com/_webedit/uploaded-files/All%20Files/Online%20Mental%20Health%20First%20Aid.pdf" rel="noopener noreferrer" target="_blank" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">&nbsp;</a>&nbsp;</div><div fr-original-style="" style="box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">This online version of the mental health first aid course will offer the same learning outcomes as the face to face training, and every person who completes the course will be certified as a Mental Health First Aider. &nbsp;The Online Mental Health First Aid course is a blended approach of individual learning and four instructor-led live sessions, hosted on a new Online Learning Hub. &nbsp;As a training course, Mental Health First Aid teaches people how to identify, understand and help someone who may be experiencing a mental health issue. The organisation&#39;s courses and resources also promote self-care as a vital way for people to help protect their mental health and prevent issues from getting worse. &nbsp;As with all our courses at Mindmaps Wellbeing, your course will be delivered by a Registered Mental Health Nurse, MHFA England Instructor and Open University Associate Lecturer and Practice Tutor experienced in remote teaching. Our live online learning will also include an assistant who is a MHFAider. &nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"><br fr-original-style="" style="box-sizing: border-box;"></div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Our fee is &pound;300pp Groups of 5+ contact <a href="mailto:info@mindmapswellbeing.com" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">info@mindmapswellbeing.com</a>&nbsp;for reduced group fees.&nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"><br fr-original-style="" style="box-sizing: border-box;"></div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Live instructor led sessions;&nbsp;</strong></div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">10:00 &ndash; 12:30 &amp; 14:30 &ndash; 17:00 both days&nbsp;</div><div style="color: rgb(62, 62, 62); box-sizing: border-box;" fr-original-style=" color: rgb(62, 62, 62);">Individual learning modules around these times. You will gain access to this on the Friday before your course start date.</div><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><u fr-original-style="" style="box-sizing: border-box;">Why choosing Mindmaps Wellbeing is a good choice for your training.</u></strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The MHFA England RRP is &pound;325pp, our rate is &pound;300pp and our fee includes:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Instructor led training sessions over two days</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Course Manual</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Workbook</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Handy Cue Card</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ MHFAider Certificate upon completion</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Plus, exclusively when you choose Mindmaps Wellbeing, it also includes:</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Your instructors are <strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Registered Mental Health Nurses and Healthcare Educators</strong> (They of course have their own lived experiences too, which they bring to the course, ensuring the content is brought to life).</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Access to our online MHFAider peer support groups moderated by the instructor team.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Access to MINDWELL companion for resources, self-care, and ongoing guidance to support you in the role as a MHFAider.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Advanced Delegate Plan &ndash; This allows delegates to book onto our open courses on dates that suit, with the best value on course fees available.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">For a little extra:&nbsp;</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Quarterly Facilitated MHFAider Forum &ndash; to provide ongoing expert support and guidance.&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">✅ Organisational MINDWELL Companion tailored for your workplace / organisation.</p>

Online MHFA England Adult Mental Health First Aid Course. 
Download brochure for course details here.  This online version of the mental health first aid course will offer the same learning outcomes as the face to face training, and every person who completes the course will be certified as a Mental Health First Aider. The Online Mental Health First Aid course is a blended approach of individual learning and four instructor-led live sessions, hosted on a new Online Learning Hub. As a training course, Mental Health First Aid teaches people how to identify, understand and help someone who may be experiencing a mental health issue. The organisation's courses and resources also promote self-care as a vital way for people to help protect their mental health and prevent issues from getting worse. As with all our courses at Mindmaps Wellbeing, your course will be delivered by a Registered Mental Health Nurse, MHFA England Instructor and Open University Associate Lecturer and Practice Tutor experienced in remote teaching. Our live online learning will also include an assistant who is a MHFAider. Our fee is £300pp Groups of 5+ contact info@mindmapswellbeing.com for reduced group fees. Live instructor led sessions; 10:00 – 12:30 & 14:30 – 17:00 both days Individual learning modules around these times. You will gain access to this on the Friday before your course start date.
Why choosing Mindmaps Wellbeing is a good choice for your training.
The MHFA England RRP is £325pp, our rate is £300pp and our fee includes:
✅ Instructor led training sessions over two days
✅ Course Manual
✅ Workbook
✅ Handy Cue Card
✅ MHFAider Certificate upon completion
Plus, exclusively when you choose Mindmaps Wellbeing, it also includes:
✅ Your instructors are Registered Mental Health Nurses and Healthcare Educators (They of course have their own lived experiences too, which they bring to the course, ensuring the content is brought to life).
✅ Access to our online MHFAider peer support groups moderated by the instructor team.
✅ Access to MINDWELL companion for resources, self-care, and ongoing guidance to support you in the role as a MHFAider.
✅ Advanced Delegate Plan – This allows delegates to book onto our open courses on dates that suit, with the best value on course fees available.
 
For a little extra: 
✅ Quarterly Facilitated MHFAider Forum – to provide ongoing expert support and guidance. 
✅ Organisational MINDWELL Companion tailored for your workplace / organisation.

Mindmaps Wellbeing

Health & Wellbeing

Occupational Health & Wellbeing

Mental Health

Accredited Mental Health First Aid

Mental Health At Work

Mental Health Nurse

Online MHFA England mental health first aid course delivered by Registered Mental Health Nurses from Mindmaps Wellbeing. 

Why choosing Mindmaps Wellbeing is a good choice for your mental health training.
The MHFA England RRP is £325pp, our rate is £300pp and our fee includes:
✅ Instructor led training sessions over two days 
✅ Course Manual
✅ Workbook
✅ Handy Cue Card
✅ MHFAider Certificate upon completion
Plus, exclusively when you choose Mindmaps Wellbeing, it also includes:

✅ Your instructors are Registered Mental Health Nurses and Healthcare Educators (They of course have their own lived experiences too, which they bring to the course, ensuring the content is brought to life).

✅ Access to our online MHFAider peer support groups moderated by the instructor team.

✅ Access to MINDWELL companion for resources, self-care, and ongoing guidance to support you in the role as a MHFAider.

✅ Advanced Delegate Plan – This allows delegates to book onto our open courses on dates that suit, with the best value on course fees available.

For a little extra: 

✅ Quarterly Facilitated MHFAider Forum – to provide ongoing expert support and guidance. 

✅ Organisational MINDWELL Companion tailored for your workplace / organisation.


MHFA England Mental Health First Aid

Crawley

QNUK Level 3 Award in Mental Health at Work (RQF) - Distance Learning
This course carries 8 UCAS Points 
The QNUK Level 3 Award in Mental Health at Work (RQF) is a comprehensive course designed to equip individuals with the skills and knowledge to promote positive mental health in the workplace. This course is delivered through a flexible distance learning format, allowing participants to complete the training at their own pace from the comfort of their home or office. It also attracts 8 UCAS points, providing added value for learners looking to enhance their professional qualifications and academic progression.

The course covers key concepts in mental health awareness, focusing on recognizing the signs of mental health issues in the workplace, providing initial support, and promoting mental well-being among colleagues. Learners will also explore strategies for reducing stigma, improving workplace culture, and understanding their role in mental health advocacy.

Participants will:
- Gain a thorough understanding of common mental health conditions and their impact on individuals and workplaces.
- Learn how to support colleagues experiencing mental health challenges and provide appropriate first-line responses.
- Develop skills to promote mental well-being and a supportive work environment.
- Understand the legal frameworks and responsibilities relating to mental health at work.

Upon successful completion of the course, learners will receive the QNUK Level 3 Award in Mental Health at Work (RQF) and earn 8 UCAS points. This qualification is invaluable for anyone seeking to enhance their ability to contribute to a mentally healthy workplace.

Self-paced distance learning (typically 8-10 hours of study)

QNUK Level 3 Award in Mental Health at Work (RQF) (valid for 3 years)

This course is suitable for individuals wanting to learn more or managers, supervisors, HR professionals, and any individual looking to support mental health initiatives in their workplace, or those seeking a foundational qualification in workplace mental health.

Comply Sense

Mental Health Awareness

Mental Health First Aid

Workplace Health & Safety

This level 3 award training will equip you with all the tools you need to be able to understand, deal with and support people struggling with their wellness and/ or ill mental health. You will also gain 8 UCAS Points by attending this course. 

QNUK Level 3 Award in Mental Health in the Workplace (RQF) 

<div style="color: rgb(36, 39, 41); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(36, 39, 41);">The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.</div><div style="color: rgb(36, 39, 41); box-sizing: border-box;" fr-original-style=" color: rgb(36, 39, 41);"><br fr-original-style="" style="box-sizing: border-box;"></div><div style="color: rgb(36, 39, 41); box-sizing: border-box;" fr-original-style=" color: rgb(36, 39, 41);">Delegates successfully completing the e-learning will:<br fr-original-style="" style="box-sizing: border-box;"><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Have an awareness of how to correctly identify and select the appropriate form of personal<br fr-original-style="" style="box-sizing: border-box;">protection against falls from MEWPs.</li><li fr-original-style="" style="box-sizing: border-box;">Have a theoretical awareness only of how to check, use, maintain and store a harness and<br fr-original-style="" style="box-sizing: border-box;">lanyard with manufacturer&rsquo;s instructions.</li><li fr-original-style="" style="box-sizing: border-box;">Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.</li></ul></div>

Kingfisher Access

The theory assessment provides delegates with the essential knowledge to select, monitor, manage and plan the correct use of Harnesses and lanyards for use in a MEWP.

Delegates successfully completing the e-learning will:
Have an awareness of how to correctly identify and select the appropriate form of personal
protection against falls from MEWPs.
Have a theoretical awareness only of how to check, use, maintain and store a harness and
lanyard with manufacturer’s instructions.
Have a theoretical awareness of how harnesses and lanyards should be fitted and adjusted.

IPAF - Harness Awareness 

Hello Loves!


It's my birthday on 26th October! and as life has been a bit busy the last weeks (business, a breakup and butt grounding!), I haven't put together an in-person celebration. But that's ok! Instead what I'd love to do is offer a magic show for my friends to enjoy! What I'll be doing is turning coffee and cake into music! 


I've found recently that I've got a talent for transmutation. And I'm going to put my skills to the test. "What is she talking about?" I hear you ask... right? ... Well, as I haven't been able to organise a gathering to celebrate with you this year, I'm inviting you to buy me a birthday coffee (or slice of red velvet cake, or parmegian pizza mmm!), and I'm going to use my magic powers to turn this into a loopstation - and play you some funky music, because you know me... it's simply what I love to do! :D I would also LOVE to have a phone call or video call with you too, let's catch up, I hope that life's business wont keep us apart!


To make this magic work, I invite you to take me on a metaphorical birthday coffee or cake date 😄 In the booking link you can do exactly that (or choose some other yummy options) and help me perform this magic!

If you do, I'll make sure to have a live coffee/cake call with you, and make you a personal comedy loop, to give so some smiles and laughs back in return! and I will squish you so hard when I see you (Well either way, you know I'll do that when I see you 😄)

I'm super excited to share more of my love, joy and creativity with the loopstation this year, in India (flying in 2 weeks) and the UK, and your input would boost my chances to do so <3 

Life's been a bit weird recently and I hope I can keep the joy alive for us all in my own special way!


(SOO in other words this is a birthday crowdfunder to help to gift me a Loopstation. I'm currently about £100 short.  If you would like to gift me the equivalent of buying a coffee or a cake, to aid my fundraiser, you can do by buying one of the 3 options on this booking page) - So that in the future I can organise some fun boogey dancey times for us together!


If you would like to contribute a Birthday coffee, you can do until 28th October (because after that it's a bit past the birthday mark (and I need to purchase the loop station soon) :'D) 


*Please note, no physical coffee, cake or pizza will be provided after purchase. (But musical, metaphorical food and beverage items maybe be voiced)
**There is also a free option incase you read all this way but aren't in a place to contribute, this option is like a free email birthday card :)


I'm silly I know! 

I LOVE YOU! 

Squishes and Big Love from Saraswati Vanisha xxx




Sing for Your Soul

Saraswati Vanisha's Birthday Magic Hat Show!

optional sprinkles marshmallows or cinnamon pop corn on top :)

Choco Mocha Yummy Coffee Gift

Yummy Vegan beetroot cake with tahini cream and dates.. oohh yeah

Red Velvet Birthday Cake Gift

Baked aubergine, tomato marinara and melted mozarella - Its like mousakka on a pizza, one of my favourite dishes ever!

Parmigan Pizza - Birthday Date Gift

Thai Green Curry with coconut rice and Edamame beans side GIft

I've read it all and vision only love your way, but I can't contribute to the fund <3 (also I don't condone virtual food magic)

Hugs and Squishes for the Journey

Oldham

<div data-id="707b00e3" data-element_type="container" data-settings='{"content_width":"full"}' style="color: rgb(9, 13, 24); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(9, 13, 24);"><div data-id="1c97cfcc" data-element_type="widget" data-widget_type="woocommerce-product-content.default" style="color: rgb(50, 74, 109); box-sizing: border-box;" fr-original-style=" color: rgb(50, 74, 109);"><p style="color: rgb(50, 74, 109); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(50, 74, 109);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">International markets offer huge Export opportunities for UK businesses.</strong><br fr-original-style="" style="box-sizing: border-box;">Finding and developing new markets for products is a hugely valuable avenue for expansion and in some sectors in particular, global demand for British brands and products makes international trade an excellent means of growth.</p><p style="color: rgb(50, 74, 109); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(50, 74, 109);">Selling internationally is very complex but &ndash; as with most things &ndash; easy with help and appropriate training.</p><p style="color: rgb(50, 74, 109); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(50, 74, 109);">This virtual half-day course covers all the basic key areas around exporting. The course will explain the requirements for documentation, plus an overview of country of origin and incoterms.</p><p style="color: rgb(50, 74, 109); font-size: var(--font-size); box-sizing: border-box;" fr-original-style=" color: rgb(50, 74, 109);"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Please note: If you are working towards your British Chamber of Commerce (BCC) Foundation Award, this course will count towards 1 of your 6 modules. Please make sure you select the &lsquo;Yes&rsquo; option in the dropdown option for BCC when booking.</strong></p></div></div><div data-id="60285c8" data-element_type="container" data-settings='{"content_width":"full"}' style="color: rgb(9, 13, 24); box-sizing: border-box;" fr-original-style=" color: rgb(9, 13, 24);"><br fr-original-style="" style="box-sizing: border-box;"></div>

International markets offer huge Export opportunities for UK businesses.
Finding and developing new markets for products is a hugely valuable avenue for expansion and in some sectors in particular, global demand for British brands and products makes international trade an excellent means of growth.
Selling internationally is very complex but – as with most things – easy with help and appropriate training.
This virtual half-day course covers all the basic key areas around exporting. The course will explain the requirements for documentation, plus an overview of country of origin and incoterms.
Please note: If you are working towards your British Chamber of Commerce (BCC) Foundation Award, this course will count towards 1 of your 6 modules. Please make sure you select the ‘Yes’ option in the dropdown option for BCC when booking.

Export Unlocked Limited

Trade & Commerce

International Trade

British Chambers of Commerce (BCC)

Import/Export

Export Management

International markets offer huge Export opportunities for UK businesses. Finding and developing new markets for products is a hugely valuable avenue for expansion and in some sectors in particular, global demand for British brands and products makes international trade an excellent means of growth.

EXPORT PROCEDURES & DOCUMENTATION

<div style="color: rgb(0, 0, 0); box-sizing: border-box;" id="isPasted" fr-original-style=" color: rgb(0, 0, 0);"><p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;"><u fr-original-style="" style="box-sizing: border-box;">Using Canva to Create Content</u></strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Want to learn how to create eyecatching and engaging graphics for your business? Join our Using Canva workshop to find out how to utilise the online graphic design platform Canva to make everything from your company branding to social media posts and more!</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&nbsp;</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">In this course, we&rsquo;ll cover everything from:</strong></p><ul fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">How to sign up and get set up on the platform</b></li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">How to navigate Canva as a beginner</b></li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Creating a brand kit for your business</b></li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Creating a new graphic together for a campaign for a business</b></li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Walkthrough of all the basic features of Canva&nbsp;</b></li><li fr-original-style="" style="box-sizing: border-box;"><b fr-original-style="" style="box-sizing: border-box;">Resizing designs to make posters and leaflets</b></li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">&nbsp;</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">As part of the live event of this workshop, we will also have a Questions and Answers session to finish this online workshop, where participants can ask specific questions about how to use Canva for their business.</strong></p></div><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">&nbsp;</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><u fr-original-style="" style="box-sizing: border-box;">Event details:</u></p><span dir="ltr" id="isPasted" fr-original-style="" style="box-sizing: border-box;"><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Date: Wednesday 30th October 2024</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Time: 10am &ndash; 11.30am</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">Location: Online (ZOOM)</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">For: Businesses based in Luton</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><br fr-original-style="" style="box-sizing: border-box;"></p><hr fr-original-style="" style="border-color: var(--border-muted); border-style: solid; clear: both; break-after: page; user-select: none; box-sizing: border-box;"><p style="color: windowtext; font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style=" color: windowtext;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">The Luton Online: Digital Marketing Launchpad is a project funded by the UK Government through the UK Shared Prosperity Fund.</strong></p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The UK Shared Prosperity Fund is a central pillar of the UK government&#39;s Levelling Up agenda and provides &pound;2.6 billion of funding for local investment by March 2025. The Fund aims to improve pride in place and increase life chances across the UK investing in communities and place, supporting local business, and people and skills. For more information, visit: <a href="https://www.gov.uk/government/publications/uk-shared-prosperity-fund-prospectus" target="_blank" rel="noopener noreferrer" fr-original-style="" style="user-select: auto; font-size: var(--font-size); box-sizing: border-box; cursor: pointer; text-decoration: inherit;">https://www.gov.uk/government/publications/uk-shared-prosperity-fund-prospectus</a></p></span>

Using Canva to Create Content
Want to learn how to create eyecatching and engaging graphics for your business? Join our Using Canva workshop to find out how to utilise the online graphic design platform Canva to make everything from your company branding to social media posts and more!
 
In this course, we’ll cover everything from:
How to sign up and get set up on the platform
How to navigate Canva as a beginner
Creating a brand kit for your business
Creating a new graphic together for a campaign for a business
Walkthrough of all the basic features of Canva
Resizing designs to make posters and leaflets
 
As part of the live event of this workshop, we will also have a Questions and Answers session to finish this online workshop, where participants can ask specific questions about how to use Canva for their business.
 
Event details:
Date: Wednesday 30th October 2024
Time: 10am – 11.30am
Location: Online (ZOOM)
For: Businesses based in Luton





The Luton Online: Digital Marketing Launchpad is a project funded by the UK Government through the UK Shared Prosperity Fund.
The UK Shared Prosperity Fund is a central pillar of the UK government's Levelling Up agenda and provides £2.6 billion of funding for local investment by March 2025. The Fund aims to improve pride in place and increase life chances across the UK investing in communities and place, supporting local business, and people and skills. For more information, visit: https://www.gov.uk/government/publications/uk-shared-prosperity-fund-prospectus

Let’s Do Business Group

Social Media Marketing

Content Creation

Social Media

Canva

Using Canva to Create Content

<div id="course-pills-1">Duration<p>1 Days</p><p>6 CPD hours</p>This course is intended for<p>The intended audience for this course would be those who have been using Office 365 for some time and are now looking at optimizing their existing business processes and designing new ones.</p>Overview<p>#NAME?</p><p>This course delivers an instructor-led product showcase for Microsoft Power Automate from start to finish in an engaging and practical way. Power Automate is a diverse product, turning business processes into automated, consistent and visual workPower Automates. Power Automate is designed to interweave the various products in Office 365 as well as connect to other on-premises and web-based solutions. This course will give you the confidence to select the right actions and workPower Automate logic for your business workPower Automates.</p></div><div id="course-pills-2"><h3>1 - An Introduction to Power Automate</h3> <ul> <li>What is Microsoft Power Automate?</li> <li>The benefits of automation</li> <li>How to get to Power Automate</li> <li>Lab 1: Setup your tenant</li> <li>Setup Office 365</li> <li>Download Course Files</li> <li>Customise your App Launcher</li> <li>Create accounts for colleagues</li> <li>After completing this module, students will be able to:</li> <li>Know what Microsoft Power Automate is</li> <li>The Benefits of using Power Automate to automate processes</li> <li>How to access a Power Automate</li> </ul> <h3>2 - Getting Started with Power Automate</h3> <ul> <li>Using Power Automate templates</li> <li>Navigating in Power Automate</li> <li>Editing a Power Automate</li> <li>Publish and trigger a Power Automate</li> <li>Turn off or delete a Power Automate</li> <li>Lab 1: Building processes in Office 365</li> <li>Create a Team with a channel</li> <li>Build an absence business process</li> <li>Testing the absence process</li> <li>Optional: Create Feedback Form</li> <li>Optional: Power Automate to Notify of Bad Ratings</li> <li>Optional: Test your Form and Power Automate</li> <li>After completing this module, students will be able to:</li> <li>How to use Power Automate tempaltes</li> <li>How to navigate around Power Automate</li> <li>How to edit Power Automates</li> <li>How to publish and trigger Power Automates</li> <li>How to turn off or delete Power Automates</li> </ul> <h3>3 - Power Automate Logic</h3> <ul> <li>Adding conditions</li> <li>Designing switches</li> <li>Using apply to each</li> <li>Configuring do until logic</li> <li>Adding a scope</li> <li>Lab 1: Scheduling documentation reviews</li> <li>Setup a policy library in SharePoint</li> <li>Design a policy review schedule</li> <li>Testing the policy review process</li> <li>Optional: Notify if a file nears review</li> <li>After completing this module, students will be able to:</li> <li>How to add condtions in a Power Automate</li> <li>How to design switches for a Power Automate</li> <li>How to use apply to each</li> <li>How to configure do until logic</li> <li>How to add a scope</li> </ul> <h3>4 - Integration</h3> <ul> <li>Standard and premium connectors</li> <li>Connecting to web services</li> <li>Using Power Automate with on-premises data</li> <li>Lab 1: Using Power Automate and SQL to Review Sales</li> <li>Create a new orders list</li> <li>Designing the price check process</li> <li>Testing the price check process</li> <li>Optional: Update with managers</li> <li>After completing this module, students will be able to:</li> <li>How to use Standard and Premium connectors</li> <li>How to connect to web services</li> <li>How to using Power Automate with on-premises data</li> </ul> <h3>5 - The Mobile App</h3> <ul> <li>Downloading the mobile app</li> <li>Signing in and account management</li> <li>Building and managing Power Automates</li> <li>Creating buttons</li> <li>Feeds and approvals</li> <li>Lab 1: Optional: Using the Power Automate mobile app</li> <li>Setting up the Power Automate mobile app</li> <li>Create a new Power Automate in the mobile app</li> <li>Using Power Automate buttons in the app</li> <li>Uninstall the Power Automate mobile app</li> <li>After completing this module, students will be able to:</li> <li>How to download the mobile app</li> <li>How to sign into the mobile app</li> <li>How to build and manage Power Automates in the mobile app</li> <li>How to create buttons in the mobile app</li> <li>How to feed and use approvals in the mobile app</li> </ul> <h3>6 - Administration and Maintenance</h3> <ul> <li>Maintaining a Power Automate</li> <li>View history and analytics</li> <li>Sharing a Power Automate</li> <li>Export and import Power Automates</li> <li>Office 365 administration for Power Automate</li> <li>Environments</li> <li>Data policies</li> <li>Data integration</li> <li>Lab 1: Maintaining your Power Automates</li> <li>Share a Power Automate with a colleague</li> <li>Disabling an active Power Automate</li> <li>Deleting a Power Automate</li> <li>After completing this module, students will be able to:</li> <li>How to maintain a Power Automate</li> <li>How to view history and analytics for a Power Automate</li> <li>How to share a Power Automate</li> <li>How to export and import Power Automates</li> <li>How to administrate a Power Automate in Office 365</li> <li>How to use data policies in a Power Automate</li> <li>How to use data integration in a Power Automate</li> </ul></div>

Nexus Human

Microsoft Power Apps

Power Apps

Microsoft 365

Microsoft Power Platform

Power Automate

Microsoft Power Automate

55268 Microsoft Power Automate for End Users

<p id="isPasted" fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">The qualification is designed for learners who have responsibility for promoting health choices within the workplace, or who would like to get involved in championing workplace health.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;">This level 2 course is delivered online across two sessions, both must be attended in order to achieve the qualification.</p><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Session 1:</strong></p><ul type="disc" fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Introduction</li><li fr-original-style="" style="box-sizing: border-box;">The importance of workplace health to employers and their employees</li><li fr-original-style="" style="box-sizing: border-box;">The role of a Workplace Health Champion</li><li fr-original-style="" style="box-sizing: border-box;">Factors affecting physical and mental health</li></ul><p fr-original-style="" style="color: var(--text); font-size: var(--font-size); box-sizing: border-box;"><strong fr-original-style="" style="font-weight: 700; box-sizing: border-box;">Session 2:</strong></p><ul type="disc" fr-original-style="" style="box-sizing: border-box;"><li fr-original-style="" style="box-sizing: border-box;">Recap</li><li fr-original-style="" style="box-sizing: border-box;">Key behaviour change principles</li><li fr-original-style="" style="box-sizing: border-box;">The need to safeguard adults as a Workplace Health Champion</li><li fr-original-style="" style="box-sizing: border-box;">Key elements involved in planning and preparing for a sport of physical activity session</li><li fr-original-style="" style="box-sizing: border-box;">How to measure the success of a sport or physical activity session</li><li fr-original-style="" style="box-sizing: border-box;">Tutor discussion / competence of qualification.</li></ul><p style="color: rgb(0, 0, 0); font-size: var(--font-size); box-sizing: border-box;" id="isPasted" fr-original-style="color: rgb(0, 0, 0);"><br fr-original-style="" style="box-sizing: border-box;"></p>

The qualification is designed for learners who have responsibility for promoting health choices within the workplace, or who would like to get involved in championing workplace health.
This level 2 course is delivered online across two sessions, both must be attended in order to achieve the qualification.
Session 1:
Introduction
The importance of workplace health to employers and their employees
The role of a Workplace Health Champion
Factors affecting physical and mental health
Session 2:
Recap
Key behaviour change principles
The need to safeguard adults as a Workplace Health Champion
Key elements involved in planning and preparing for a sport of physical activity session
How to measure the success of a sport or physical activity session
Tutor discussion / competence of qualification.



67381 Courses

Design Of Circulating Fluidized Bed Boilers

By EnergyEdge - Training for a Sustainable Energy Future

Commissioning of Electrical Equipment

By EnergyEdge - Training for a Sustainable Energy Future

Maintenance Planning, Scheduling & Control

By EnergyEdge - Training for a Sustainable Energy Future

Advanced Turnaround, Shutdown and Outage Management

By EnergyEdge - Training for a Sustainable Energy Future

Fundamentals of Seismic for Non-Geophysicists

By EnergyEdge - Training for a Sustainable Energy Future

Root Cause Analysis for Boilers and Steam Cycle Failures

By EnergyEdge - Training for a Sustainable Energy Future

Electrical Generators, Excitation Systems and Governing Systems

By EnergyEdge - Training for a Sustainable Energy Future

Commissioning and Start-Up Activities of Coal Power Plants

By EnergyEdge - Training for a Sustainable Energy Future

VTCT Level 4 Micropigmentation & Microblading Training Package

By Cosmetic College

Permanent Eyeliner | Fundamental Beginners PMU Training -Small Group Learning

By ID Liner | Permanent Makeup Training & Supplies

Search By Location