77 Courses in Birmingham

Gain a deep understanding of Production Sharing Contracts (PSC) and related agreements through our expert-led course. Enroll now and excel in your field with EnergyEdge.

Directions to The Warehouse: The address is: Travel and Parking arrangements: Paid parking is available (attendees are responsible for paying parking fees) From New St Station, follow signs to Moor St station. When you get to Moor St, go down the hill to the side of the station towards the multi-storey car park. At the car park, go left under the railway bridge. Immediately after the railway bridge turn right onto shaws passage, which is quite short. We're on the corner at the end of shaws Passage - walk round the corner onto Allison Street and along past the Cafe to the full glass door with the Birmingham Friends of the Earth hanging sign.

Birmingham Settlement are running a programme of training sessions between April and July 2024. All sessions are half-a-day and are an excellent opportunity to learn about important topics, starting with Adult Safeguarding on the 18th April.  If you are interested in any of the courses or would like more information, contact our Trainer David Coombes via email david.coombes@bsettlement.org.uk or by phone 07399 560 766. Training Sessions: Adult Safeguarding April 18th 9.15am – 12.30pm (Sports & Community Centre, Kingstanding) Training will include: What is Adult Safeguarding? What is abuse? Categories of abuse. Those most at risk of abuse. Identifying the signs of abuse. Taking safeguarding action. The issue of client consent. Mental Health Awareness April 23rd 9.30am – 12.45pm (Nature & Wellbeing Centre, Ladywood) Training will include: Defining mental health and mental illness. Signs and symptoms of the most common mental health conditions. Identifying and responding to a mental health crisis. Maintaining positive mental wellbeing. How best to support mental health recovery. Trauma Informed Practice May 14th 9.30am – 12.45pm (Nature & Wellbeing Centre, Ladywood) Training will include: What is trauma? Symptoms of trauma. Impact of trauma on children. Understanding the impact of Adverse Childhood experiences. Key principles of trauma informed practice. Managing work stress and undertaking self-care. Professional Boundaries May 23rd 9.15am – 12.30pm (Sports & Community Centre, Kingstanding) Training will include: What are professional boundaries and why are they important? Professional vs Personal boundaries and how they differ. How trauma impacts personal power and the ability to establish boundaries. Signs of boundary violations. How boundaries support wellbeing. Conflict Resolution June 6th 9.15am – 12.30pm (Sports & Community Centre, Kingstanding) Training will include: Defining conflict and exploring the risks vs the benefits of conflict. Looking at anger and aggression. Understanding how the brain responds to threat and danger. Exploring the practical communication strategies effective in the prevention and de-escalation of conflict. Learning to respond rather than react. Equality, Diversity & Inclusion June 11th 9.30am – 12.45pm (Nature & Wellbeing Centre, Ladywood) Training will include: The Equality Act and protected characteristics. Different forms of discrimination. How ‘membership’ of specific groups might bring advantage or disadvantage. Understanding the ‘multi layered’ nature of discrimination. Understanding how diversity and inclusion can positively impact and change what we do. Dementia Awareness July 9th 9.30am – 12.45pm (Nature & Wellbeing Centre, Ladywood) Training will include: What is dementia? The different types of dementia. The signs and symptoms of dementia. Risk reduction strategies. Benefits of early diagnosis. Barriers to diagnosis, treatment, and support. How we can help. Disability Awareness July 18th 9.15 – 12.30pm (Sports & Community Centre, Kingstanding) Training will include: Defining disability, disability as a social construct, non-visible disabilities. Barriers facing those with disabilities and the positive actions and reasonable adjustments we all can make to create more inclusive and less discriminatory environments.

Mental Health First Aid England Aware is an introductory course designed to increase mental health awareness and give an understanding of how to look after wellbeing and challenge stigma. Through an interactive instructor-led live session, you will learn: What mental health is and how to challenge stigma An introduction to some common mental health issues Confidence to support someone who may be experiencing mental ill health Ways to look after your own mental health and support wellbeing Outline What is mental health? Mental Health Continuum Factors that affect mental health Stigma Stress and stress management Spotting signs of distress Mental health conditions:DepressionAnxiety disordersPsychosisEating disordersSuicideSelf-harm Recovery Take 10 Together - starting a supportive conversation Supporting mental health in the workplace Useful statistics Helpful resources

Directions to The Warehouse: The address is: Travel and Parking arrangements: Paid parking is available (attendees are responsible for paying parking fees) From New St Station, follow signs to Moor St station. When you get to Moor St, go down the hill to the side of the station towards the multi-storey car park. At the car park, go left under the railway bridge. Immediately after the railway bridge turn right onto shaws passage, which is quite short. We're on the corner at the end of shaws Passage - walk round the corner onto Allison Street and along past the Cafe to the full glass door with the Birmingham Friends of the Earth hanging sign.

The QNUK Level 3 Award in Emergency First Aid at Work (RQF) is ideal for those employers that need to meet the minimum requirement of first aid regulations; typically those working in shops, offices and other low risk environments.

If you are a Mental Health First Aider or MHFA Champion you have skills for life that support you and the people around you. We believe that mental health should be treated equally to physical health - and just like physical first aid, Mental Health First Aid training should be kept up to date. The four-hour MHFA Refresher course will empower you to: Keep your awareness of mental health supports current Update your knowledge of mental health and what influences it Practice applying the Mental Health First Aid action plan Outline About mental health Stress and factors that influence mental health Mental health continuum and stigma Frame of reference and non-judgement Reintroducing ALGEE Warning signs of mental ill-health Depression and anxiety Suicide and first aid for suicidal crisis Psychosis and first aid for severe psychotic episodes Practising our MHFA sills Self-care, wellbeing and recovery

Developing a network of MHFA Champions is a key step in creating a mentally healthy workplace. The MHFA Champion one-day course will give you all the skills you need to be an MHFA Champion. This one-day course trains you as an MHFA Champion, giving you: An understanding of common mental health issues Knowledge and confidence to advocate for mental health awareness Ability to spot signs of mental ill-health Skills to support positive wellbeing 1 Introduction to MHFA and understanding mental health (3 hours 30 mins) About Mental Health First Aid About mental health and stress in the workplace Stigma and discrimination Depression Anxiety disorders Other mental health issues (eating disorders, self-harm, psychosis) Early warning signs of mental ill-health Alcohol, drugs and mental health 2 MHFA Champion in practice (3 hours 30 mins) Applying the Mental Health First Aid action plan Action 1: Approach the person, assess and assist with any crisis Suicide Action 2: Listen and communicate non-judgementally Action 3: Give support and information Action 4: Encourage the person to get appropriate professional help Action 5: Encourage other supports Recovery Building a mentally healthy workplace Action planning for using MHFA

This first aid course is designed for people who have a specific interest or responsibility at work or in voluntary and community activities, such as a first aider, in being able to provide basic life support (BLS) when dealing with an emergency situation that may involve the use of an automated external defibrillator (AED).

About this Course This 5 full-day course provides a comprehensive understanding of all the commissioning procedures for combined cycle power plants. The Commissioning Management System (CMS) of combined cycle power plants is covered in detail in this course. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report. The course provides also a thorough understanding of all the commissioning requirements for gas turbines, steam turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear and transformers. All the stages of the commissioning procedure are covered in-depth in this course. This includes preparation - planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a combined cycle power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of combined cycle power plant systems, safety rules clearance certificates, procedure for the control and handling of defects, commissioning reports, operational testing, first fire, generator synchronization, performance testing, heat rate testing, emission testing, contract testing, CO2 concentration tests, electrical full-load rejection test, duct burner testing, partial load stability test, and reliability test. This course is a MUST for anyone who is involved in the pre-commissioning or commissioning of any combined cycle power plant equipment because it provides detailed pre-commissioning checks and tests, and detailed tests and commissioning procedures and instructions for every component in a combined cycle power plant. In addition, the seminar provides an in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each combined cycle power plant equipment, safety and precautions, safety rules clearance certificates, procedures for handling defects, and commissioning reports. Training Objectives Pre-commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in Combined Cycle Power Plants: Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in combined cycle power plants Commissioning Management System (CMS) of Combined Cycle Power Plants: Discover the benefits of the CMS of combined cycle power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report Commissioning Procedures and Instructions for Heat Recovery Steam Generators, Air Blow and Steam Blow of Steam and Gas Piping in Combined Cycle Power Plants: Learn about the commissioning procedures and instructions for heat recovery steam generators, chemical cleaning of heat recovery steam generators, air blow and gas blow of steam and gas piping in combined cycle power plants, safety valve setting and soot blowers Commissioning Procedures and Instructions for Gas Turbines and Steam Turbines: Gain a thorough understanding of all the commissioning procedures and instructions for gas and steam turbines and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging Commissioning Procedures and Instructions for Generator and Auxiliaries: Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and start-up of generators Commissioning Procedures and Instructions for Electrical Equipment: Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers and motors Operational Testing, Performance Testing, Heat Rate Testing, Emission Testing of Combine Cycle Power Plants: Gain a thorough understanding of operational testing, first fire, generator synchronization, performance testing, heat rate testing, emission testing, contract testing, CO2 concentration tests, electrical full-load rejection test, duct burner testing, partial load stability test, and reliability test of combined cycle power plants Target Audience Engineers of all disciplines Managers Technicians Maintenance personnel Other technical individuals Training Methods The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization. Trainer Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment. Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations. In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as 'Excellent' or 'Very Good' by the delegates who attended his seminars and lectures. He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him; Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999). Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999). Furthermore, he has received the following awards: The first 'Excellence in Teaching' award offered by PowerEdge, Singapore, in December 2016 The first 'Excellence in Teaching' award offered by the Professional Development Center at University of Toronto (May, 1996). The 'Excellence in Teaching Award' in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East). Awarded graduation 'With Distinction' from Dalhousie University when completed Bachelor of Engineering degree (1983). Lastly, he was awarded his Bachelor of Engineering Degree 'with distinction' from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations